BIANCA-BRICK-FR-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-FR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bibo 1.3.6.1.4.1.272.4
                                 fr 1.3.6.1.4.1.272.4.13
                                       frMprTable 1.3.6.1.4.1.272.4.13.1 no-access
This table contains an entry for each frame relay DCE virtual interface. This interface is called virtual because it does not necessarily reflect to a single hardware interface; it is possible to either narrow (many hardware interfaces looking as a single virtual) or widen (a single hardware interface with several VCs is mapped to several virtual interfaces) the interface. Entries in this table are created manually and will result to the creation of a multiprotocol routing interface in the ifTable. This interface can than be used by higher level protocols like ip, ipx and bridging. The object frMprIfIndex shall be set to 0 for creation of new entries. The BRICK will allocate the next free interface index and assign it to frMprIfIndex. Rows of this table can be deleted by setting the object frMprEncapsulation to the value delete.
                                           frMprEntry 1.3.6.1.4.1.272.4.13.1.1 no-access
                                               frMprIfIndex 1.3.6.1.4.1.272.4.13.1.1.1 integer read-write
This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated by the BRICK and assigned to the object. At the same time a new interface is created in the IfTable.
                                               frMprMtu 1.3.6.1.4.1.272.4.13.1.1.2 integer read-write
The Maximum transfer unit to be used with the interface (see also ifMtu).
                                               frMprEncapsulation 1.3.6.1.4.1.272.4.13.1.1.3 integer read-write
This object specifies the encapsulation method to be used. If this object is set to mpr, the encapsulation method described in Q933a is used for the protocols IP, IPX and transparent bridging. This encapsulation is also explained in RFC 1490. Enumeration: 'mpr': 1, 'delete': 7.
                                               frMprIfcType 1.3.6.1.4.1.272.4.13.1.1.4 integer read-write
This object specifies wether the interface is a multipoint(1) or a point-to-point(2) interface. Enumeration: 'multipoint': 1, 'point-to-point': 2.
                                               frMprInverseArp 1.3.6.1.4.1.272.4.13.1.1.5 integer read-write
This object specifies the use of Inverse Arp (as described in RFC 1490) to automatically detect upper layer network addresses. Enumeration: 'disabled': 2, 'enabled': 1.