BIANCA-BRICK-ATM2-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-ATM2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, RFC1158-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bintec 1.3.6.1.4.1.272
         bibo 1.3.6.1.4.1.272.4
             atm 1.3.6.1.4.1.272.4.16
                   atmIfTable 1.3.6.1.4.1.272.4.16.10 no-access
The atmIfTable displays all available ATM capable interfaces.
                         atmIfEntry 1.3.6.1.4.1.272.4.16.10.1 no-access
An interface entry containing objects at the subnetwork layer and below for a particular interface.
                             atmIfIndex 1.3.6.1.4.1.272.4.16.10.1.1 integer read-only
The interface index of the associated ATM hardware.
                             atmIfType 1.3.6.1.4.1.272.4.16.10.1.2 integer read-only
This object contains an interface type. Enumeration: 'vdsl': 4, 'adsl': 2, 'other': 1, 'shdsl': 3.
                             atmIfDescr 1.3.6.1.4.1.272.4.16.10.1.3 displaystring read-only
Short description for this object.
                             atmIfAdminStatus 1.3.6.1.4.1.272.4.16.10.1.4 integer read-write
This object contains the desired state of the ATM interface. Enumeration: 'down': 2, 'up': 1.
                             atmIfOperStatus 1.3.6.1.4.1.272.4.16.10.1.5 integer read-only
The current operational state of the ATM interface. Enumeration: 'down': 2, 'up': 1.
                             atmIfLastChange 1.3.6.1.4.1.272.4.16.10.1.6 timeticks read-only
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
                             atmIfMaxTxRate 1.3.6.1.4.1.272.4.16.10.1.7 integer read-write
This object enables traffic shaping on the related ATM interface. If set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted. Note that the maximum transmit rate is also determined by the capabilities of the ATM hardware.
                             atmIfOperMode 1.3.6.1.4.1.272.4.16.10.1.8 integer read-only
The current operational mode of the ATM interface. The value atm(1) means ATM is used on the line. The value efm(2) means ATM is used only internally and Ethernet with HDLC framing is used on the line. Enumeration: 'atm': 1, 'efm': 2.
                             atmIfInPkts 1.3.6.1.4.1.272.4.16.10.1.22 integer read-only
The number of reassembled received packets.
                             atmIfOutPkts 1.3.6.1.4.1.272.4.16.10.1.23 integer read-only
This number of transmitted packets.
                             atmIfRxSpeed 1.3.6.1.4.1.272.4.16.10.1.24 integer read-only
This object contains the receive interface speed.
                             atmIfTxSpeed 1.3.6.1.4.1.272.4.16.10.1.25 integer read-only
This object contains the transmit interface speed.
                             atmIfInOctets 1.3.6.1.4.1.272.4.16.10.1.26 counter read-only
The total number of octets received on the interface, including framing characters.
                             atmIfInDiscards 1.3.6.1.4.1.272.4.16.10.1.27 counter read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
                             atmIfInErrors 1.3.6.1.4.1.272.4.16.10.1.28 counter read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
                             atmIfOutOctets 1.3.6.1.4.1.272.4.16.10.1.29 counter read-only
The total number of octets transmitted out of the interface, including framing characters.
                             atmIfOutDiscards 1.3.6.1.4.1.272.4.16.10.1.30 counter read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
                             atmIfOutErrors 1.3.6.1.4.1.272.4.16.10.1.31 counter read-only
The number of outbound packets that could not be transmitted because of errors.
                   atmVpcTable 1.3.6.1.4.1.272.4.16.11 no-access
A table of status and parameter information on the virtual path connections which cross this UNI. There is one entry in this table for each permanent virtual path connection. This is the lite version of ATM-FORUM-MIB DEFINITIONS
                         atmVpcEntry 1.3.6.1.4.1.272.4.16.11.1 no-access
An entry in the table, containing information about a particular virtual path connection.
                             atmVpcPortIndex 1.3.6.1.4.1.272.4.16.11.1.1 integer read-only
The interface index of the associated ATM hardware.
                             atmVpcVpi 1.3.6.1.4.1.272.4.16.11.1.2 integer read-only
The VPI value of this Virtual Path Connection.
                             atmVpcOperStatus 1.3.6.1.4.1.272.4.16.11.1.3 integer read-only
The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used. Enumeration: 'unknown': 1, 'localUpEnd2endUnknown': 4, 'end2endUp': 2, 'end2endDown': 3, 'localDown': 5.
                   atmVccTable 1.3.6.1.4.1.272.4.16.12 no-access
A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCCs that are supported; e.g., signalling, OAM flows, and ILMI, but not unassigned cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS
                         atmVccEntry 1.3.6.1.4.1.272.4.16.12.1 no-access
An entry in the table, containing information about a particular virtual channel connection.
                             atmVccPortIndex 1.3.6.1.4.1.272.4.16.12.1.1 integer read-only
The interface index of the associated ATM hardware.
                             atmVccVpi 1.3.6.1.4.1.272.4.16.12.1.2 integer read-only
The VPI value of this Virtual Channel Connection.
                             atmVccVci 1.3.6.1.4.1.272.4.16.12.1.3 integer read-only
The VCI value of this Virtual Channel Connection.
                             atmVccOperStatus 1.3.6.1.4.1.272.4.16.12.1.4 integer read-only
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end-to-end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used. Enumeration: 'unknown': 1, 'localUpEnd2endUnknown': 4, 'end2endUp': 2, 'end2endDown': 3, 'localDown': 5.
                   atmOamTable 1.3.6.1.4.1.272.4.16.13 no-access
This tables contains all OAM configuration parameters.
                         atmOamEntry 1.3.6.1.4.1.272.4.16.13.1 no-access
                             atmOamAtmIfIndex 1.3.6.1.4.1.272.4.16.13.1.1 integer read-write
The interface index of the associated ATM hardware.
                             atmOamVpi 1.3.6.1.4.1.272.4.16.13.1.2 integer read-write
The VPI value of this Virtual Path/Channel Connection.
                             atmOamVci 1.3.6.1.4.1.272.4.16.13.1.3 integer read-write
The VCI value of this Virtual Channel Connection.
                             atmOamFlowLevel 1.3.6.1.4.1.272.4.16.13.1.4 integer read-write
The OAM hierarchical flow levels : VC (F5) or VP (F4). Enumeration: 'f4': 2, 'f5': 1, 'delete': 10.
                             atmOamLoopbackEnd2End 1.3.6.1.4.1.272.4.16.13.1.5 integer read-write
Indicates wether OAM loopback is enabled onto the end-to-end connection. Enumeration: 'disabled': 1, 'enabled': 2.
                             atmOamLoopbackSegment 1.3.6.1.4.1.272.4.16.13.1.6 integer read-write
Indicates wether active OAM loopback is enabled onto the segment connection. Enumeration: 'disabled': 1, 'enabled': 2.
                             atmOamLoopbackEnd2EndInterval 1.3.6.1.4.1.272.4.16.13.1.7 integer read-write
OAM loopback transmit interval (in seconds) for end-to-end context.
                             atmOamLoopbackSegmentInterval 1.3.6.1.4.1.272.4.16.13.1.8 integer read-write
OAM loopback transmit interval (in seconds) for segment context.
                             atmOamLoopbackEnd2EndMaxPending 1.3.6.1.4.1.272.4.16.13.1.9 integer read-write
Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the end-to-end operational down status.
                             atmOamLoopbackSegmentMaxPending 1.3.6.1.4.1.272.4.16.13.1.10 integer read-write
Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the segment operational down status.
                             atmOamCCEnd2EndActivation 1.3.6.1.4.1.272.4.16.13.1.11 integer read-write
Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCEnd2EndDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected. Enumeration: 'passive': 1, 'active': 2, 'none': 5, 'no-negotiation': 4, 'both': 3.
                             atmOamCCSegmentActivation 1.3.6.1.4.1.272.4.16.13.1.12 integer read-write
Determines wether OAM continuity check activation request will be activated and/or accepted for the associated segment connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCSegmentDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected. Enumeration: 'passive': 1, 'active': 2, 'none': 5, 'no-negotiation': 4, 'both': 3.
                             atmOamCCEnd2EndDirection 1.3.6.1.4.1.272.4.16.13.1.13 integer read-write
Determines OAM continuity check direction (for end-to-end). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink. Enumeration: 'source': 2, 'none': 4, 'sink': 1, 'both': 3.
                             atmOamCCSegmentDirection 1.3.6.1.4.1.272.4.16.13.1.14 integer read-write
Determines OAM continuity check direction (for segment). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink. Enumeration: 'source': 2, 'none': 4, 'sink': 1, 'both': 3.
                   atmOamStatTable 1.3.6.1.4.1.272.4.16.14 no-access
This tables displays all used VCs.
                         atmOamStatEntry 1.3.6.1.4.1.272.4.16.14.1 no-access
                             atmOamStatAtmIfIndex 1.3.6.1.4.1.272.4.16.14.1.1 integer read-only
The interface index of the associated ATM hardware.
                             atmOamStatVpi 1.3.6.1.4.1.272.4.16.14.1.2 integer read-only
The VPI value of this Virtual Path Connection.
                             atmOamStatVci 1.3.6.1.4.1.272.4.16.14.1.3 integer read-only
The VCI value of this Virtual Channel Connection.
                             atmOamStatFlowType 1.3.6.1.4.1.272.4.16.14.1.4 integer read-only
The OAM hierarchical flow levels: see ITU I.610 Enumeration: 'f4-segment': 3, 'f5-segment': 1, 'f5-end2end': 2, 'f4-end2end': 4.
                             atmOamStatLoopbackTxCells 1.3.6.1.4.1.272.4.16.14.1.6 counter read-only
The number of OAM loopback cells that have been sent to the target in this sequence.
                             atmOamStatLoopbackRxCells 1.3.6.1.4.1.272.4.16.14.1.7 counter read-only
The number of OAM loopback cells that have been received from the target in this sequence.
                             atmOamStatLoopbackPending 1.3.6.1.4.1.272.4.16.14.1.8 counter read-only
The number of currently outstanding OAM loopback responses.
                             atmOamStatLoopbackCorr 1.3.6.1.4.1.272.4.16.14.1.9 integer read-only
The correlation of the last sent loopback message.
                             atmOamStatAisState 1.3.6.1.4.1.272.4.16.14.1.10 integer read-only
The AIS state is set to on(2) after receiving an AIS cell or detection of LOC (Loss of Continuity). The Ais state is set to off(1) either when receiving user cells (same VCC context) or via timeout. Enumeration: 'on': 2, 'off': 1.
                             atmOamStatAisTxCells 1.3.6.1.4.1.272.4.16.14.1.11 counter read-only
The number of OAM alarm indication signal (AIS) cells that have been transmitted since last change of AisState.
                             atmOamStatAisRxCells 1.3.6.1.4.1.272.4.16.14.1.12 counter read-only
The number of OAM alarm indication signal (AIS) cells that have been received since last change of AisState.
                             atmOamStatTotalAisTxCells 1.3.6.1.4.1.272.4.16.14.1.13 counter read-only
The total number of OAM alarm indication signal (AIS) cells that have been transmitted.
                             atmOamStatTotalAisRxCells 1.3.6.1.4.1.272.4.16.14.1.14 counter read-only
The total number of OAM alarm indication signal (AIS) cells that have been received.
                             atmOamStatRdiState 1.3.6.1.4.1.272.4.16.14.1.15 integer read-only
The RDI state is set to on(2) after receiving a RDI cell. The RDI state is to off(1) via timeout. Enumeration: 'on': 2, 'off': 1.
                             atmOamStatRdiTxCells 1.3.6.1.4.1.272.4.16.14.1.16 counter read-only
The number of OAM remote defect indication (RDI) cells that have been transmitted since last change of RdiState.
                             atmOamStatRdiRxCells 1.3.6.1.4.1.272.4.16.14.1.17 counter read-only
The number of OAM remote defect indication (RDI) cells that have been received since last change of RdiState.
                             atmOamStatTotalRdiTxCells 1.3.6.1.4.1.272.4.16.14.1.18 integer read-only
The totoal number of OAM remote defect indication (RDI) cells that have been transmitted.
                             atmOamStatTotalRdiRxCells 1.3.6.1.4.1.272.4.16.14.1.19 counter read-only
The total number of OAM remote defect indication (RDI) cells that have been received.
                             atmOamStatCCActivatorState 1.3.6.1.4.1.272.4.16.14.1.20 integer read-only
The status of the initiated CC negotiation, inactive(1) is the initial status, wait-act-con(2) is set after sending an CC activation request, active(3) is reached after receiving the CC activation confirmation whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confirmation. Enumeration: 'active': 3, 'wait-deact-con': 4, 'inactive': 1, 'wait-act-con': 2.
                             atmOamStatCCActivatorDirection 1.3.6.1.4.1.272.4.16.14.1.21 integer read-only
The direction of action indicated by a received CC activation confirmation, source(1) correlates with 'A-B', sink(2) with 'B-A' and both(3) with 'A-B' and 'B-A'. Enumeration: 'source': 2, 'not-applicable': 4, 'sink': 1, 'both': 3.
                             atmOamStatCCActivatorCorr 1.3.6.1.4.1.272.4.16.14.1.22 integer read-only
The correlation of the last CC activation message sent to the responder.
                             atmOamStatCCResponderState 1.3.6.1.4.1.272.4.16.14.1.23 integer read-only
The status of the passive CC negotiation, inactive(1) is the initial status, active(3) is reached after receiving an CC activation request whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confirmation. Enumeration: 'active': 3, 'wait-deact-con': 4, 'inactive': 1.
                             atmOamStatCCResponderDirection 1.3.6.1.4.1.272.4.16.14.1.24 integer read-only
The direction of action indicated by a received CC activation request, source(1) correlates with 'B-A', sink(2) with 'A-B' and both(3) with 'A-B' and 'B-A'. Enumeration: 'source': 1, 'not-applicable': 4, 'sink': 2, 'both': 3.
                             atmOamStatCCResponderCorr 1.3.6.1.4.1.272.4.16.14.1.25 integer read-only
The correlation of the received CC activation message.
                             atmOamStatCCTxCells 1.3.6.1.4.1.272.4.16.14.1.26 counter read-only
The number of OAM continuity check cells that have been sent to the target in this sequence.
                             atmOamStatCCRxCells 1.3.6.1.4.1.272.4.16.14.1.27 counter read-only
The number of OAM continuity check cells that have been received from the target in this sequence.
                   ethoaPvcTable 1.3.6.1.4.1.272.4.16.15 no-access
The ethoaPvcTable displays all virtual ethernets defined for a VCI/VPI on a specified hardware.
                         ethoaPvcEntry 1.3.6.1.4.1.272.4.16.15.1 no-access
                             ethoaPvcIfIndex 1.3.6.1.4.1.272.4.16.15.1.1 integer read-only
This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable.
                             ethoaPvcDescr 1.3.6.1.4.1.272.4.16.15.1.2 displaystring read-write
Short description of the configured PVC
                             ethoaPvcAtmIfIndex 1.3.6.1.4.1.272.4.16.15.1.3 integer read-write
The Index to the ATM hardware.
                             ethoaPvcVpi 1.3.6.1.4.1.272.4.16.15.1.4 integer read-write
The VPI value of this Virtual Path Connection.
                             ethoaPvcVci 1.3.6.1.4.1.272.4.16.15.1.5 integer read-write
The VCI value of this Virtual Channel Connection.
                             ethoaPvcEncapsulation 1.3.6.1.4.1.272.4.16.15.1.6 integer read-write
This values decides whether frames are send without FCS(1), with FCS(2) or wether VC multiplexing is used. Enumeration: 'bridged-no-fcs': 1, 'delete': 10, 'bridged-fcs': 2, 'vc-multiplexed': 3.
                             ethoaPvcPhysAddress 1.3.6.1.4.1.272.4.16.15.1.7 physaddress read-write
The MAC-Address used for the virtual interface.
                   rpoaPvcTable 1.3.6.1.4.1.272.4.16.16 no-access
This table configures Vpi/Vci for raw protocols (IP, IPX, etc.)
                         rpoaPvcEntry 1.3.6.1.4.1.272.4.16.16.1 no-access
                             rpoaPvcIfIndex 1.3.6.1.4.1.272.4.16.16.1.1 integer read-only
This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable.
                             rpoaPvcDescr 1.3.6.1.4.1.272.4.16.16.1.2 displaystring read-write
Short description of the configured PVC
                             rpoaPvcAtmIfIndex 1.3.6.1.4.1.272.4.16.16.1.3 integer read-write
The Index to the ATM hardware.
                             rpoaPvcVpi 1.3.6.1.4.1.272.4.16.16.1.4 integer read-write
The VPI value of this Virtual Path Connection.
                             rpoaPvcVci 1.3.6.1.4.1.272.4.16.16.1.5 integer read-write
The VCI value of this Virtual Channel Connection.
                             rpoaPvcEncapsulation 1.3.6.1.4.1.272.4.16.16.1.6 integer read-write
This values decides whether frames are send codes with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO) or wether VC multiplexing is used. Enumeration: 'delete': 10, 'iso': 2, 'non-iso': 1, 'vc-multiplexed': 3.
                   pppoaPvcTable 1.3.6.1.4.1.272.4.16.17 no-access
This table configures Vpi/Vci for PPP oaver AAL5 (PPPoA) permanent and on-demand sessions.
                         pppoaPvcEntry 1.3.6.1.4.1.272.4.16.17.1 no-access
                             pppoaPvcIfIndex 1.3.6.1.4.1.272.4.16.17.1.1 integer read-only
This object contains an interface index and refers to an entry in ifTable. When creating new entries in the table, the next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable with that very index.
                             pppoaPvcDescr 1.3.6.1.4.1.272.4.16.17.1.2 displaystring read-write
Short description of the configured PVC
                             pppoaPvcAtmIfIndex 1.3.6.1.4.1.272.4.16.17.1.3 integer read-write
The Index to the ATM hardware.
                             pppoaPvcVpi 1.3.6.1.4.1.272.4.16.17.1.4 integer read-write
The VPI value of this Virtual Path Connection.
                             pppoaPvcVci 1.3.6.1.4.1.272.4.16.17.1.5 integer read-write
The VCI value of this Virtual Channel Connection.
                             pppoaPvcEncapsulation 1.3.6.1.4.1.272.4.16.17.1.6 integer read-write
This value decides whether VC multiplexing or LLC encapsulation is used. Enumeration: 'llc': 2, 'delete': 10, 'vc-multiplexed': 1.
                             pppoaPvcClientType 1.3.6.1.4.1.272.4.16.17.1.7 integer read-write
This variable defines whether the PPP over AAL5 session will be established permanent(1) or initiated on-demand(2). Enumeration: 'permanent': 1, 'on-demand': 2.
                   atmQosVccTable 1.3.6.1.4.1.272.4.16.19 no-access
This table provides QoS information for each active ATM VC on the related ATM interface
                         atmQosVccEntry 1.3.6.1.4.1.272.4.16.19.1 no-access
An entry in the table, containing ATM QoS parameters about a particular virtual connection.
                             atmQosVccAtmIfIndex 1.3.6.1.4.1.272.4.16.19.1.1 integer read-write
The interface index of the associated ATM hardware.
                             atmQosVccVpi 1.3.6.1.4.1.272.4.16.19.1.2 integer read-write
The VPI value of this Virtual Channel Connection.
                             atmQosVccVci 1.3.6.1.4.1.272.4.16.19.1.3 integer read-write
The VCI value of this Virtual Channel Connection.
                             atmQosVccService 1.3.6.1.4.1.272.4.16.19.1.4 integer read-write
The ATM service category of this virtual circuit connection: cbr vbr vbr2 vbr3 VBR1 + Best Effort vbr-rt real-time vbr2-rt real-time vbr3-rt real-time ubr Best Effort ubr2 Best Effort abr delete Enumeration: 'cbr': 1, 'vbr': 2, 'delete': 20, 'ubr': 8, 'vbr3': 4.
                             atmQosVccOutPcr 1.3.6.1.4.1.272.4.16.19.1.5 integer read-write
Output Peak Cell Rate (PCR) in bps.
                             atmQosVccOutScr 1.3.6.1.4.1.272.4.16.19.1.6 integer read-write
Output Sustained Cell Rate (SCR) in bps.
                             atmQosVccOutMbs 1.3.6.1.4.1.272.4.16.19.1.7 integer read-write
Output Maximum Burst Size (MBS) in Bytes, only for atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service service category VBR).
                             atmQosVccOutMcr 1.3.6.1.4.1.272.4.16.19.1.8 integer read-write
Output Minimum Cell Rate (MCR) in bps for connection with vbr-nrt(3).
                   atmAturPerfDataTable 1.3.6.1.4.1.272.4.16.20 no-access
                         atmAturPerfDataEntry 1.3.6.1.4.1.272.4.16.20.1 no-access
An entry in atmAturPerfDataTable.
                             atmAturPerfIfIndex 1.3.6.1.4.1.272.4.16.20.1.1 integer read-only
Specifies the ATM interface index.
                             atmAturPerfIdleCells 1.3.6.1.4.1.272.4.16.20.1.2 integer read-only
The number of ATM idle cells.
                             atmAturPerfDataCells 1.3.6.1.4.1.272.4.16.20.1.3 integer read-only
The number of ATM data cells.
                             atmAturPerfLcds 1.3.6.1.4.1.272.4.16.20.1.4 integer read-only
Count of the number of Loss of Cell Delineation failures since agent reset.
                             atmAturPerfHecs 1.3.6.1.4.1.272.4.16.20.1.5 integer read-only
Count of the number of Header Error Check failures since agent reset.
                             atmAturPerfCurr15MinTimeElapsed 1.3.6.1.4.1.272.4.16.20.1.11 integer read-only
Total elapsed seconds in this interval.
                             atmAturPerfCurr15MinIdleCells 1.3.6.1.4.1.272.4.16.20.1.12 integer read-only
The number of ATM idle cells in the mandatory 15 minute interval.
                             atmAturPerfCurr15MinDataCells 1.3.6.1.4.1.272.4.16.20.1.13 integer read-only
The number of ATM data cells in the mandatory 15 minute interval.
                             atmAturPerfCurr15MinLcds 1.3.6.1.4.1.272.4.16.20.1.14 integer read-only
Count of seconds in the mandatory 15 minute interval when there was Loss of Cell Delineation.
                             atmAturPerfCurr15MinHecs 1.3.6.1.4.1.272.4.16.20.1.15 integer read-only
Count of seconds in the mandatory 15 minute interval when there was Header Error Check failures.
                             atmAturPerfCurr1DayTimeElapsed 1.3.6.1.4.1.272.4.16.20.1.18 integer read-only
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
                             atmAturPerfCurr1DayIdleCells 1.3.6.1.4.1.272.4.16.20.1.19 integer read-only
The number of ATM idle cells during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
                             atmAturPerfCurr1DayDataCells 1.3.6.1.4.1.272.4.16.20.1.20 integer read-only
The number of ATM data cells during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
                             atmAturPerfCurr1DayLcds 1.3.6.1.4.1.272.4.16.20.1.21 integer read-only
Count of the number of seconds when there was Loss of Cell Delineation during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
                             atmAturPerfCurr1DayHecs 1.3.6.1.4.1.272.4.16.20.1.22 integer read-only
Count of the number of seconds when there was Header Error Check failures during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
                             atmAturPerfPrev1DayIdleCells 1.3.6.1.4.1.272.4.16.20.1.26 integer read-only
The number of ATM idle cells within the most recent previous 1-day period.
                             atmAturPerfPrev1DayDataCells 1.3.6.1.4.1.272.4.16.20.1.27 integer read-only
The number of ATM data cells within the most recent previous 1-day period.
                             atmAturPerfPrev1DayLcds 1.3.6.1.4.1.272.4.16.20.1.28 integer read-only
Count of seconds in the interval when there was Loss of Cell Delineation within the most recent previous 1-day period.
                             atmAturPerfPrev1DayHecs 1.3.6.1.4.1.272.4.16.20.1.29 integer read-only
Count of seconds in the interval when there was Header Error Check within the most recent previous 1-day period.
                   atmAtucPerfDataTable 1.3.6.1.4.1.272.4.16.21 no-access
                         atmAtucPerfDataEntry 1.3.6.1.4.1.272.4.16.21.1 no-access
An entry in atmAtucPerfDataTable.
                             atmAtucPerfIfIndex 1.3.6.1.4.1.272.4.16.21.1.1 integer read-only
Specifies the ATM interface index.
                             atmAtucPerfIdleCells 1.3.6.1.4.1.272.4.16.21.1.2 integer read-only
The number of ATM idle cells.
                             atmAtucPerfDataCells 1.3.6.1.4.1.272.4.16.21.1.3 integer read-only
The number of ATM data cells.
                             atmAtucPerfLcds 1.3.6.1.4.1.272.4.16.21.1.4 integer read-only
Count of the number of Loss of Cell Delineation failures since agent reset.
                             atmAtucPerfHecs 1.3.6.1.4.1.272.4.16.21.1.5 integer read-only
Count of the number of Header Error Check failures since agent reset.
                             atmAtucPerfCurr15MinTimeElapsed 1.3.6.1.4.1.272.4.16.21.1.11 integer read-only
Total elapsed seconds in this interval.
                             atmAtucPerfCurr15MinIdleCells 1.3.6.1.4.1.272.4.16.21.1.12 integer read-only
The number of ATM idle cells in the mandatory 15 minute interval.
                             atmAtucPerfCurr15MinDataCells 1.3.6.1.4.1.272.4.16.21.1.13 integer read-only
The number of ATM data cells in the mandatory 15 minute interval.
                             atmAtucPerfCurr15MinLcds 1.3.6.1.4.1.272.4.16.21.1.14 integer read-only
Count of seconds in the mandatory 15 minute interval when there was Loss of Cell Delineation.
                             atmAtucPerfCurr15MinHecs 1.3.6.1.4.1.272.4.16.21.1.15 integer read-only
Count of seconds in the mandatory 15 minute interval when there was Header Error Check failures.
                             atmAtucPerfCurr1DayTimeElapsed 1.3.6.1.4.1.272.4.16.21.1.18 integer read-only
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
                             atmAtucPerfCurr1DayIdleCells 1.3.6.1.4.1.272.4.16.21.1.19 integer read-only
The number of ATM idle cells during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
                             atmAtucPerfCurr1DayDataCells 1.3.6.1.4.1.272.4.16.21.1.20 integer read-only
The number of ATM data cells during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
                             atmAtucPerfCurr1DayLcds 1.3.6.1.4.1.272.4.16.21.1.21 integer read-only
Count of the number of seconds when there was Loss of Cell Delineation during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
                             atmAtucPerfCurr1DayHecs 1.3.6.1.4.1.272.4.16.21.1.22 integer read-only
Count of the number of seconds when there was Header Error Check failures during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
                             atmAtucPerfPrev1DayIdleCells 1.3.6.1.4.1.272.4.16.21.1.26 integer read-only
The number of ATM idle cells within the most recent previous 1-day period.
                             atmAtucPerfPrev1DayDataCells 1.3.6.1.4.1.272.4.16.21.1.27 integer read-only
The number of ATM data cells within the most recent previous 1-day period.
                             atmAtucPerfPrev1DayLcds 1.3.6.1.4.1.272.4.16.21.1.28 integer read-only
Count of seconds in the interval when there was Loss of Cell Delineation within the most recent previous 1-day period.
                             atmAtucPerfPrev1DayHecs 1.3.6.1.4.1.272.4.16.21.1.29 integer read-only
Count of seconds in the interval when there was Header Error Check within the most recent previous 1-day period.