BGP4-V2-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: BGP4-V2-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bgpM2 1.3.6.1.2.1.1
This MIB module defines management objects for the Border Gateway Protocol, Version 4.
     bgpM2BaseScalars 1.3.6.1.2.1.1.1
         bgpM2BaseNotifications 1.3.6.1.2.1.1.1.0
             bgpM2Established 1.3.6.1.2.1.1.1.0.1
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
             bgpM2BackwardTransition 1.3.6.1.2.1.1.1.0.2
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
         bgpM2Version 1.3.6.1.2.1.1.1.1
             bgpM2VersionTable 1.3.6.1.2.1.1.1.1.1 no-access
Table of supported BGP versions.
                 bgpM2VersionEntry 1.3.6.1.2.1.1.1.1.1.1 no-access
Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum.
                     bgpM2VersionIndex 1.3.6.1.2.1.1.1.1.1.1.1 unsigned32 read-only
The version number of the BGP Protocol.
                     bgpM2VersionSupported 1.3.6.1.2.1.1.1.1.1.1.2 truthvalue read-only
This value is TRUE if this version of the BGP protocol identified in 'bgpM2VersionIndex' is supported. The absence of a row for a particular bgpM2VersionIndex indicates that that bgpM2VersionIndex protocol version number is not supported.
         bgpM2SupportedCapabilities 1.3.6.1.2.1.1.1.2
             bgpM2CapabilitySupportAvailable 1.3.6.1.2.1.1.1.2.1 truthvalue read-only
This value is TRUE if capability support is available and is enabled.
             bgpM2SupportedCapabilitiesTable 1.3.6.1.2.1.1.1.2.2 no-access
Table of supported BGP-4 capabilities.
                 bgpM2SupportedCapabilitiesEntry 1.3.6.1.2.1.1.1.2.2.1 no-access
Information about supported capabilities indexed by capability number.
                     bgpM2SupportedCapabilityCode 1.3.6.1.2.1.1.1.2.2.1.1 unsigned32 read-only
Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.
                     bgpM2SupportedCapability 1.3.6.1.2.1.1.1.2.2.1.2 truthvalue read-only
This value is True if this capability is supported, False otherwise.
         bgpM2AsSize 1.3.6.1.2.1.1.1.4 integer read-only
The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft. Enumeration: 'twoOctet': 1, 'fourOctet': 2.
         bgpM2LocalAs 1.3.6.1.2.1.1.1.5 inetautonomoussystemnumber read-only
The local autonomous system number. If the bgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
         bgpM2LocalIdentifier 1.3.6.1.2.1.1.1.6 bgpm2identifier read-only
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
         bgpM2BaseScalarExtensions 1.3.6.1.2.1.1.1.7
             bgpM2BaseScalarNonCapExts 1.3.6.1.2.1.1.1.7.1
                 bgpM2BaseScalarRouteReflectExts 1.3.6.1.2.1.1.1.7.1.2796
                           bgpM2RouteReflector 1.3.6.1.2.1.1.1.7.1.2796.1 truthvalue read-only
This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE.
                           bgpM2ClusterId 1.3.6.1.2.1.1.1.7.1.2796.2 bgpm2identifier read-only
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
                 bgpM2BaseScalarASConfedExts 1.3.6.1.2.1.1.1.7.1.3065
                           bgpM2ConfederationRouter 1.3.6.1.2.1.1.1.7.1.3065.1 truthvalue read-only
This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation.
                           bgpM2ConfederationId 1.3.6.1.2.1.1.1.7.1.3065.2 inetautonomoussystemnumber read-only
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
             bgpM2BaseScalarCapExts 1.3.6.1.2.1.1.1.7.2
         bgpM2BaseScalarConfiguration 1.3.6.1.2.1.1.1.8
             bgpM2CfgBaseScalarStorageType 1.3.6.1.2.1.1.1.8.1 storagetype read-write
This object specifies the intended storage type for all configurable base scalars.
             bgpM2CfgLocalAs 1.3.6.1.2.1.1.1.8.2 inetautonomoussystemnumber read-write
The local autonomous system number. If the bgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
             bgpM2CfgLocalIdentifier 1.3.6.1.2.1.1.1.8.3 bgpm2identifier read-write
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
             bgpM2CfgBaseScalarExtensions 1.3.6.1.2.1.1.1.8.4
                 bgpM2CfgBaseScalarNonCapExts 1.3.6.1.2.1.1.1.8.4.1
                     bgpM2CfgBaseScalarReflectorExts 1.3.6.1.2.1.1.1.8.4.1.2796
                               bgpM2CfgRouteReflector 1.3.6.1.2.1.1.1.8.4.1.2796.1 truthvalue read-write
This value is set to true if this implementation will be supporting route reflection.
                               bgpM2CfgClusterId 1.3.6.1.2.1.1.1.8.4.1.2796.2 bgpm2identifier read-write
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
                     bgpM2CfgBaseScalarASConfedExts 1.3.6.1.2.1.1.1.8.4.1.3065
                               bgpM2CfgConfederationRouter 1.3.6.1.2.1.1.1.8.4.1.3065.1 truthvalue read-write
This value is set to true if this implementation will be supporting BGP AS Confederations.
                               bgpM2CfgConfederationId 1.3.6.1.2.1.1.1.8.4.1.3065.2 inetautonomoussystemnumber read-write
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
                 bgpM2CfgBaseScalarCapExts 1.3.6.1.2.1.1.1.8.4.2
     bgpM2Peer 1.3.6.1.2.1.1.2
         bgpM2PeerData 1.3.6.1.2.1.1.2.1
             bgpM2PeerTable 1.3.6.1.2.1.1.2.1.1 no-access
BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers.
                 bgpM2PeerEntry 1.3.6.1.2.1.1.2.1.1.1 no-access
Entry containing information about the connection with a remote BGP peer.
                     bgpM2PeerInstance 1.3.6.1.2.1.1.2.1.1.1.1 unsigned32 read-only
The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes RFC 2547 PE-CE routers. Implementations that do not support multiple routing instances should return 1 for this object. XXX TODO - We need to provide a way to configure these in the peer configuration table.
                     bgpM2PeerIdentifier 1.3.6.1.2.1.1.2.1.1.1.2 bgpm2identifier read-only
The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the bgpM2PeerState is in the OpenConfirm or the Established state.
                     bgpM2PeerState 1.3.6.1.2.1.1.2.1.1.1.3 integer read-only
The remote BGP peer's FSM state. Enumeration: 'established': 6, 'openconfirm': 5, 'opensent': 4, 'idle': 1, 'connect': 2, 'active': 3.
                     bgpM2PeerStatus 1.3.6.1.2.1.1.2.1.1.1.4 integer read-only
Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The bgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running. Enumeration: 'halted': 1, 'running': 2.
                     bgpM2PeerConfiguredVersion 1.3.6.1.2.1.1.2.1.1.1.5 unsigned32 read-only
The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.
                     bgpM2PeerNegotiatedVersion 1.3.6.1.2.1.1.2.1.1.1.6 unsigned32 read-only
The negotiated version of BGP running between the two peers.
                     bgpM2PeerLocalAddrType 1.3.6.1.2.1.1.2.1.1.1.7 inetaddresstype read-only
The address family of the local end of the peering session.
                     bgpM2PeerLocalAddr 1.3.6.1.2.1.1.2.1.1.1.8 inetaddress read-only
The address of the local end of the peering session.
                     bgpM2PeerLocalPort 1.3.6.1.2.1.1.2.1.1.1.9 inetportnumber read-only
The local port for the TCP connection between the BGP peers.
                     bgpM2PeerLocalAs 1.3.6.1.2.1.1.2.1.1.1.10 inetautonomoussystemnumber read-only
Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.
                     bgpM2PeerRemoteAddrType 1.3.6.1.2.1.1.2.1.1.1.11 inetaddresstype read-only
The address family of the remote end of the peering session.
                     bgpM2PeerRemoteAddr 1.3.6.1.2.1.1.2.1.1.1.12 inetaddress read-only
The address of the remote end of the peering session.
                     bgpM2PeerRemotePort 1.3.6.1.2.1.1.2.1.1.1.13 inetportnumber read-only
The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects bgpM2PeerLocalAddr, bgpM2PeerLocalPort, bgpM2PeerRemoteAddr and bgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452.
                     bgpM2PeerRemoteAs 1.3.6.1.2.1.1.2.1.1.1.14 inetautonomoussystemnumber read-only
The remote autonomous system number.
                     bgpM2PeerIndex 1.3.6.1.2.1.1.2.1.1.1.15 unsigned32 read-only
This value is a unique index for the remote peer entry in the bgpM2PeerTable. It is assigned by the agent at the point of creation of the bgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of bgpM2PeerIndex row instance values across rows of the bgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the bgpM2PeerTable and other tables utilizing bgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the bgpM2PeerTable that comes up while this row still exists will re-utilize the same row.
         bgpM2PeerErrors 1.3.6.1.2.1.1.2.2
             bgpM2PeerErrorsTable 1.3.6.1.2.1.1.2.2.1 no-access
On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its bgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session.
                 bgpM2PeerErrorsEntry 1.3.6.1.2.1.1.2.2.1.1 no-access
Each entry contains information about errors sent and received for a particular BGP peer.
                     bgpM2PeerLastErrorReceived 1.3.6.1.2.1.1.2.2.1.1.1 octet string read-only
The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
                     bgpM2PeerLastErrorSent 1.3.6.1.2.1.1.2.2.1.1.2 octet string read-only
The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
                     bgpM2PeerLastErrorReceivedTime 1.3.6.1.2.1.1.2.2.1.1.3 timeticks read-only
The timestamp that the last NOTIFICATION was received from this peer.
                     bgpM2PeerLastErrorSentTime 1.3.6.1.2.1.1.2.2.1.1.4 timeticks read-only
The timestamp that the last NOTIFICATION was sent to this peer.
                     bgpM2PeerLastErrorReceivedText 1.3.6.1.2.1.1.2.2.1.1.5 snmpadminstring read-only
This object contains an implementation specific explanation of the error that was reported.
                     bgpM2PeerLastErrorSentText 1.3.6.1.2.1.1.2.2.1.1.6 snmpadminstring read-only
This object contains an implementation specific explanation of the error that is being reported.
                     bgpM2PeerLastErrorReceivedData 1.3.6.1.2.1.1.2.2.1.1.7 octet string read-only
The last error code's data seen by this peer.
                     bgpM2PeerLastErrorSentData 1.3.6.1.2.1.1.2.2.1.1.8 octet string read-only
The last error code's data sent to this peer.
         bgpM2PeerTimers 1.3.6.1.2.1.1.2.3
             bgpM2PeerEventTimesTable 1.3.6.1.2.1.1.2.3.1 no-access
A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state.
                 bgpM2PeerEventTimesEntry 1.3.6.1.2.1.1.2.3.1.1 no-access
Each row contains a set of statistics about time spent and events encountered in the peer session Established state.
                     bgpM2PeerFsmEstablishedTime 1.3.6.1.2.1.1.2.3.1.1.1 gauge32 read-only
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
                     bgpM2PeerInUpdatesElapsedTime 1.3.6.1.2.1.1.2.3.1.1.2 gauge32 read-only
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state
             bgpM2PeerConfiguredTimersTable 1.3.6.1.2.1.1.2.3.2 no-access
Per peer management data on BGP session timers.
                 bgpM2PeerConfiguredTimersEntry 1.3.6.1.2.1.1.2.3.2.1 no-access
Each entry corresponds to the current state of BGP timers on a given peering session.
                     bgpM2PeerConnectRetryInterval 1.3.6.1.2.1.1.2.3.2.1.1 unsigned32 read-only
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
                     bgpM2PeerHoldTimeConfigured 1.3.6.1.2.1.1.2.3.2.1.2 unsigned32 read-only
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
                     bgpM2PeerKeepAliveConfigured 1.3.6.1.2.1.1.2.3.2.1.3 unsigned32 read-only
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in bgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
                     bgpM2PeerMinASOrigInterval 1.3.6.1.2.1.1.2.3.2.1.4 unsigned32 read-only
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
                     bgpM2PeerMinRouteAdverInterval 1.3.6.1.2.1.1.2.3.2.1.5 unsigned32 read-only
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
             bgpM2PeerNegotiatedTimersTable 1.3.6.1.2.1.1.2.3.3 no-access
Current values of per-peer timers which can be dynamically set in the bgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from bgpM2PeerConfiguredTimersTable row instances.
                 bgpM2PeerNegotiatedTimersEntry 1.3.6.1.2.1.1.2.3.3.1 no-access
Each entry reflects a value of the currently operational, negotiated timers as reflected in the BgpM2PeerNegotiatedTimersEntry.
                     bgpM2PeerHoldTime 1.3.6.1.2.1.1.2.3.3.1.1 unsigned32 read-only
The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and bgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state.
                     bgpM2PeerKeepAlive 1.3.6.1.2.1.1.2.3.3.1.2 unsigned32 read-only
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpM2PeerHoldTime, it has the same proportion as what bgpM2PeerKeepAliveConfigured has when compared with bgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of bgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state.
         bgpM2PeerCapabilities 1.3.6.1.2.1.1.2.4
             bgpM2PeerCapsAnnouncedTable 1.3.6.1.2.1.1.2.4.1 no-access
This table contains the capabilities that are supported for a given peer.
                 bgpM2PeerCapsAnnouncedEntry 1.3.6.1.2.1.1.2.4.1.1 no-access
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
                     bgpM2PeerCapAnnouncedCode 1.3.6.1.2.1.1.2.4.1.1.1 unsigned32 read-only
The BGP Capability Advertisement Capability Code.
                     bgpM2PeerCapAnnouncedIndex 1.3.6.1.2.1.1.2.4.1.1.2 unsigned32 read-only
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
                     bgpM2PeerCapAnnouncedValue 1.3.6.1.2.1.1.2.4.1.1.3 octet string read-only
The value of the announced capability.
             bgpM2PeerCapsReceivedTable 1.3.6.1.2.1.1.2.4.2 no-access
This table contains the capabilities that are supported for a given peer.
                 bgpM2PeerCapsReceivedEntry 1.3.6.1.2.1.1.2.4.2.1 no-access
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
                     bgpM2PeerCapReceivedCode 1.3.6.1.2.1.1.2.4.2.1.1 unsigned32 read-only
The BGP Capability Advertisement Capability Code.
                     bgpM2PeerCapReceivedIndex 1.3.6.1.2.1.1.2.4.2.1.2 unsigned32 read-only
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
                     bgpM2PeerCapReceivedValue 1.3.6.1.2.1.1.2.4.2.1.3 octet string read-only
The value of the announced capability.
         bgpM2PeerCounters 1.3.6.1.2.1.1.2.6
             bgpM2PeerCountersTable 1.3.6.1.2.1.1.2.6.1 no-access
The counters associated with a BGP Peer.
                 bgpM2PeerCountersEntry 1.3.6.1.2.1.1.2.6.1.1 no-access
Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
                     bgpM2PeerInUpdates 1.3.6.1.2.1.1.2.6.1.1.1 counter32 read-only
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
                     bgpM2PeerOutUpdates 1.3.6.1.2.1.1.2.6.1.1.2 counter32 read-only
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
                     bgpM2PeerInTotalMessages 1.3.6.1.2.1.1.2.6.1.1.3 counter32 read-only
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
                     bgpM2PeerOutTotalMessages 1.3.6.1.2.1.1.2.6.1.1.4 counter32 read-only
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
                     bgpM2PeerFsmEstablishedTrans 1.3.6.1.2.1.1.2.6.1.1.5 counter32 read-only
The total number of times the BGP FSM transitioned into the established state for this peer.
             bgpM2PrefixCountersTable 1.3.6.1.2.1.1.2.6.2 no-access
Additional per-peer, per AFI SAFI counters for prefixes
                 bgpM2PrefixCountersEntry 1.3.6.1.2.1.1.2.6.2.1 no-access
Entry containing information about a bgp-peers prefix counters.
                     bgpM2PrefixCountersAfi 1.3.6.1.2.1.1.2.6.2.1.1 bgpm2afi read-only
The AFI index of the per-peer, per prefix counters
                     bgpM2PrefixCountersSafi 1.3.6.1.2.1.1.2.6.2.1.2 bgpm2safi read-only
The SAFI index of the per-peer, per prefix counters
                     bgpM2PrefixInPrefixes 1.3.6.1.2.1.1.2.6.2.1.7 gauge32 read-only
The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.
                     bgpM2PrefixInPrefixesAccepted 1.3.6.1.2.1.1.2.6.2.1.8 gauge32 read-only
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
                     bgpM2PrefixInPrefixesRejected 1.3.6.1.2.1.1.2.6.2.1.9 gauge32 read-only
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.
                     bgpM2PrefixOutPrefixes 1.3.6.1.2.1.1.2.6.2.1.10 gauge32 read-only
The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.
         bgpM2PeerExtensions 1.3.6.1.2.1.1.2.7
             bgpM2PeerNonCapExts 1.3.6.1.2.1.1.2.7.1
                 bgpM2PeerRouteReflectionExts 1.3.6.1.2.1.1.2.7.1.2796
                           bgpM2PeerReflectorClientTable 1.3.6.1.2.1.1.2.7.1.2796.1 no-access
Table of route reflection client settings on a per-peer basis.
                               bgpM2PeerReflectorClientEntry 1.3.6.1.2.1.1.2.7.1.2796.1.1 no-access
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
                                   bgpM2PeerReflectorClient 1.3.6.1.2.1.1.2.7.1.2796.1.1.1 integer read-only
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers. Enumeration: 'client': 1, 'nonClient': 0, 'meshedClient': 2.
                 bgpM2PeerASConfederationExts 1.3.6.1.2.1.1.2.7.1.3065
                           bgpM2PeerConfedMemberTable 1.3.6.1.2.1.1.2.7.1.3065.1 no-access
Table of confederation member settings on a per-peer basis.
                               bgpM2PeerConfedMemberEntry 1.3.6.1.2.1.1.2.7.1.3065.1.1 no-access
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
                                   bgpM2PeerConfedMember 1.3.6.1.2.1.1.2.7.1.3065.1.1.1 truthvalue read-only
This value indicates whether the given peer is in our confederation or not.
             bgpM2PeerCapExts 1.3.6.1.2.1.1.2.7.2
         bgpM2PeerConfiguration 1.3.6.1.2.1.1.2.8
             bgpM2CfgPeerAdminStatusTable 1.3.6.1.2.1.1.2.8.1 no-access
Table containing rows for administratively starting and stopping peering sessions.
                 bgpM2CfgPeerAdminStatusEntry 1.3.6.1.2.1.1.2.8.1.1 no-access
Entry containing row for administratively starting and stopping peers.
                     bgpM2CfgPeerAdminStatus 1.3.6.1.2.1.1.2.8.1.1.1 integer read-write
This object allows the Manual Stop and Manual Start events to be sent to an activated peering session. Enumeration: 'start': 2, 'stop': 1.
             bgpM2CfgPeerNextIndex 1.3.6.1.2.1.1.2.8.2 integer32 read-only
This object contains the next appropriate value to use as an index for creation of a row instance in in the bgpM2CfgPeerTable. If the number of available entries in the bgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of bgpM2CfgPeerTable row creation at the time of bgpM2CfgPeerNextIndex retrieval.
             bgpM2CfgPeerTable 1.3.6.1.2.1.1.2.8.3 no-access
BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table.
                 bgpM2CfgPeerEntry 1.3.6.1.2.1.1.2.8.3.1 no-access
Entry containing information set up by a management entity to configure a connection with a BGP peer.
                     bgpM2CfgPeerConfiguredVersion 1.3.6.1.2.1.1.2.8.3.1.1 unsigned32 read-only
The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of bgpM2CfgAllowVersionNegotiation.
                     bgpM2CfgAllowVersionNegotiation 1.3.6.1.2.1.1.2.8.3.1.2 truthvalue read-only
If set to true, during session establishment with this peer, negotiation to a version lower than that specified in bgpM2CfgPeerConfiguredVersion will be allowed.
                     bgpM2CfgPeerLocalAddrType 1.3.6.1.2.1.1.2.8.3.1.3 inetaddresstype read-only
The address family of the speakers of this BGP session.
                     bgpM2CfgPeerLocalAddr 1.3.6.1.2.1.1.2.8.3.1.4 inetaddress read-only
The address of the local end of the peering session.
                     bgpM2CfgPeerLocalAs 1.3.6.1.2.1.1.2.8.3.1.5 inetautonomoussystemnumber read-only
Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of bgpM2CfgLocalAs.
                     bgpM2CfgPeerRemoteAddrType 1.3.6.1.2.1.1.2.8.3.1.6 inetaddresstype read-only
The address family of the speakers of the remote BGP session.
                     bgpM2CfgPeerRemoteAddr 1.3.6.1.2.1.1.2.8.3.1.7 inetaddress read-only
The address of the remote end (destination address of peer) for peering session.
                     bgpM2CfgPeerRemoteAs 1.3.6.1.2.1.1.2.8.3.1.8 inetautonomoussystemnumber read-only
Autonomous system number of the remote peer.
                     bgpM2CfgPeerEntryStorageType 1.3.6.1.2.1.1.2.8.3.1.9 storagetype read-only
This object type specifies the intended storage type for the bgpM2CfgPeerEntry row instance.
                     bgpM2CfgPeerError 1.3.6.1.2.1.1.2.8.3.1.10 integer read-only
This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated bgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, bgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {bgpM2CfgPeerLocalAddrType, bgpM2CfgPeerLocalAddr, bgpM2CfgPeerRemoteAddr}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, bgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the bgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the bgpM2PeerTable row instance (as reflected through bgpM2CfgPeerPeerEntry) associated with this row instance. Enumeration: 'unknown': 0, 'errDuplicatePeeringSession': 2, 'notActivated': 1, 'activated': 3.
                     bgpM2CfgPeerBgpPeerEntry 1.3.6.1.2.1.1.2.8.3.1.11 rowpointer read-only
Upon activation of the session data contained in this row instance, this object points to an instance of a row within the bgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via bgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of bgpM2CfgPeerError which is activated (3).
                     bgpM2CfgPeerRowEntryStatus 1.3.6.1.2.1.1.2.8.3.1.12 rowstatus read-only
This object type is used to control creation, activation, and deletion of this row instance.
                     bgpM2CfgPeerIndex 1.3.6.1.2.1.1.2.8.3.1.13 integer32 no-access
Uniquely identifies an instance of a peer row, as an element of configuration.
                     bgpM2CfgPeerStatus 1.3.6.1.2.1.1.2.8.3.1.14 integer read-only
This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated. Enumeration: 'halted': 1, 'running': 2.
             bgpM2CfgPeerTimersTable 1.3.6.1.2.1.1.2.8.4 no-access
Table for configuration of per-peer timers.
                 bgpM2CfgPeerTimersEntry 1.3.6.1.2.1.1.2.8.4.1 no-access
Entry containing per-peer timer configuration.
                     bgpM2CfgPeerConnectRetryInterval 1.3.6.1.2.1.1.2.8.4.1.1 unsigned32 read-only
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
                     bgpM2CfgPeerHoldTimeConfigured 1.3.6.1.2.1.1.2.8.4.1.2 unsigned32 read-only
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
                     bgpM2CfgPeerKeepAliveConfigured 1.3.6.1.2.1.1.2.8.4.1.3 unsigned32 read-only
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in bgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
                     bgpM2CfgPeerMinASOrigInterval 1.3.6.1.2.1.1.2.8.4.1.4 unsigned32 read-only
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
                     bgpM2CfgPeerMinRouteAdverInter 1.3.6.1.2.1.1.2.8.4.1.5 unsigned32 read-only
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
             bgpM2CfgPeerExtensions 1.3.6.1.2.1.1.2.8.5
                 bgpM2CfgPeerNonCapExts 1.3.6.1.2.1.1.2.8.5.1
                     bgpM2CfgPeerRouteReflectionExts 1.3.6.1.2.1.1.2.8.5.1.2796
                               bgpM2CfgPeerReflectorClientTable 1.3.6.1.2.1.1.2.8.5.1.2796.1 no-access
Table of route reflection client settings on a per-peer basis.
                                   bgpM2CfgPeerReflectorClientEntry 1.3.6.1.2.1.1.2.8.5.1.2796.1.1 no-access
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
                                       bgpM2CfgPeerReflectorClient 1.3.6.1.2.1.1.2.8.5.1.2796.1.1.1 integer read-only
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers. Enumeration: 'client': 1, 'nonClient': 0, 'meshedClient': 2.
                     bgpM2CfgPeerASConfederationExts 1.3.6.1.2.1.1.2.8.5.1.3065
                               bgpM2CfgPeerConfedMemberTable 1.3.6.1.2.1.1.2.8.5.1.3065.1 no-access
Table of confederation member settings on a per-peer basis.
                                   bgpM2CfgPeerConfedMemberEntry 1.3.6.1.2.1.1.2.8.5.1.3065.1.1 no-access
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
                                       bgpM2CfgPeerConfedMember 1.3.6.1.2.1.1.2.8.5.1.3065.1.1.1 truthvalue read-only
This value indicates whether the given peer is in our confederation or not.
                 bgpM2CfgPeerCapExts 1.3.6.1.2.1.1.2.8.5.2
     bgpM2Rib 1.3.6.1.2.1.1.3
         bgpM2NlriTable 1.3.6.1.2.1.1.3.1 no-access
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where bgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
             bgpM2NlriEntry 1.3.6.1.2.1.1.3.1.1 no-access
Information about a path to a network.
                 bgpM2NlriIndex 1.3.6.1.2.1.1.3.1.1.1 unsigned32 read-only
This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
                 bgpM2NlriAfi 1.3.6.1.2.1.1.3.1.1.2 bgpm2afi read-only
The address family of the prefix for this NLRI.
                 bgpM2NlriSafi 1.3.6.1.2.1.1.3.1.1.3 bgpm2safi read-only
The subsequent address family of the prefix for this NLRI
                 bgpM2NlriPrefixType 1.3.6.1.2.1.1.3.1.1.4 inetaddresstype read-only
The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the bgpM2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0). XXX TODO - This seems like a hack.
                 bgpM2NlriPrefix 1.3.6.1.2.1.1.3.1.1.5 inetaddress read-only
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by bgpM2PathAttrAddrPrefixLen are zeroed.
                 bgpM2NlriPrefixLen 1.3.6.1.2.1.1.3.1.1.6 inetaddressprefixlength read-only
Length in bits of the address prefix in the Network Layer Reachability Information field.
                 bgpM2NlriBest 1.3.6.1.2.1.1.3.1.1.7 truthvalue read-only
An indication of whether or not this route was chosen as the best BGP4 route.
                 bgpM2NlriCalcLocalPref 1.3.6.1.2.1.1.3.1.1.8 unsigned32 read-only
The degree of preference calculated by the receiving BGP4 speaker for an advertised route.
                 bgpM2PathAttrIndex 1.3.6.1.2.1.1.3.1.1.9 unsigned32 read-only
This value is a unique index for the per-NLRI entry in the bgpM2PathAttrTable. It is assigned by the agent at the point of creation of the bgpM2PathAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of bgpM2PathAttrIndex row instance values across rows of the bgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI.
                 bgpM2NlriOpaqueType 1.3.6.1.2.1.1.3.1.1.10 integer read-only
This object enumerates the type of the row that is pointed to in the table row bgpM2NlriOpaquePointer instance, if bgpM2NlriOpaquePointer is in fact not a zero length. bgpM2NlriOpaqueType is necessary since the data referenced by bgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of bgpM2NlriOpaqueType would be bgpMplsLabelStack(1). Enumeration: 'bgpMplsLabelStack': 1, 'none': 0.
                 bgpM2NlriOpaquePointer 1.3.6.1.2.1.1.3.1.1.11 rowpointer read-only
Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if bgpM2NlriOpaqueType is none.
         bgpM2AdjRibsOutTable 1.3.6.1.2.1.1.3.2 no-access
This table contains on a per-peer basis one or more routes from the bgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out.
             bgpM2AdjRibsOutEntry 1.3.6.1.2.1.1.3.2.1 no-access
List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
                 bgpM2AdjRibsOutIndex 1.3.6.1.2.1.1.3.2.1.1 unsigned32 read-only
Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
                 bgpM2AdjRibsOutRoute 1.3.6.1.2.1.1.3.2.1.2 rowpointer read-only
This object points to the route in the bgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
         bgpM2PathAttrCount 1.3.6.1.2.1.1.3.3 counter32 read-only
The number of entries in the bgpM2PathAttrTable.
         bgpM2PathAttrTable 1.3.6.1.2.1.1.3.4 no-access
Provides per advertised network-prefix attribute data, as advertised over a peering session.
             bgpM2PathAttrEntry 1.3.6.1.2.1.1.3.4.1 no-access
Each entry contains data about a given network prefix, per-prefix and per-advertising peer.
                 bgpM2PathAttrOrigin 1.3.6.1.2.1.1.3.4.1.1 integer read-only
The ultimate origin of the path information. Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
                 bgpM2PathAttrNextHopAddrType 1.3.6.1.2.1.1.3.4.1.2 inetaddresstype read-only
The address family of the address for the border router that should be used to access the destination network.
                 bgpM2PathAttrNextHop 1.3.6.1.2.1.1.3.4.1.3 inetaddress read-only
The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. bgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , bgpM2LinkLocalNextHopPresent will be false and bgpM2PathAttrNextHop will contain the link local nexthop.
                 bgpM2PathAttrMedPresent 1.3.6.1.2.1.1.3.4.1.4 truthvalue read-only
Whether or not the MED value is present. If it is not present, the bgpM2PathAttrMed object has no useful value and should be set to 0.
                 bgpM2PathAttrMed 1.3.6.1.2.1.1.3.4.1.5 unsigned32 read-only
This metric is used to discriminate between multiple exit points to an adjacent autonomous system.
                 bgpM2PathAttrLocalPrefPresent 1.3.6.1.2.1.1.3.4.1.6 truthvalue read-only
Whether or not the LocalPref value is present. If it is not present, the bgpM2PathAttrLocalPref object has no useful value and should be set to 0.
                 bgpM2PathAttrLocalPref 1.3.6.1.2.1.1.3.4.1.7 unsigned32 read-only
The originating BGP4 speakers degree of preference for an advertised route.
                 bgpM2PathAttrAtomicAggregate 1.3.6.1.2.1.1.3.4.1.8 integer read-only
When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific. Enumeration: 'atomicAggregateMissing': 2, 'atomicAggregatePresent': 1.
                 bgpM2PathAttrAggregatorAS 1.3.6.1.2.1.1.3.4.1.9 inetautonomoussystemnumber read-only
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
                 bgpM2PathAttrAggregatorAddr 1.3.6.1.2.1.1.3.4.1.10 bgpm2identifier read-only
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
                 bgpM2AsPathCalcLength 1.3.6.1.2.1.1.3.4.1.11 unsigned32 read-only
This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
                 bgpM2AsPathString 1.3.6.1.2.1.1.3.4.1.12 snmpadminstring read-only
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
                 bgpM2AsPathIndex 1.3.6.1.2.1.1.3.4.1.13 unsigned32 read-only
This value is a unique index for the decomposed AS Path in the bgpM2AsPathTable. It is assigned by the agent at the point of creation of the bgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of bgpM2AsPathIndex row instance values across rows of the bgpM2AsPathTable.
         bgpM2AsPath4byteTable 1.3.6.1.2.1.1.3.5 no-access
This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space.
             bgpM2AsPath4byteEntry 1.3.6.1.2.1.1.3.5.1 no-access
Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.
                 bgpM2AsPath4bytePathPresent 1.3.6.1.2.1.1.3.5.1.1 truthvalue read-only
This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: bgpM2PathAttrAggregatorAS - zero (0). bgpM2AsPathCalcLength - zero (0). bgpM2AsPathString - zero (0) length string. bgpM2AsPathIndex - zero (0).
                 bgpM2AsPath4byteAggregatorAS 1.3.6.1.2.1.1.3.5.1.2 inetautonomoussystemnumber read-only
The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
                 bgpM2AsPath4byteCalcLength 1.3.6.1.2.1.1.3.5.1.3 unsigned32 read-only
This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.
                 bgpM2AsPath4byteString 1.3.6.1.2.1.1.3.5.1.4 snmpadminstring read-only
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
                 bgpM2AsPath4byteIndex 1.3.6.1.2.1.1.3.5.1.5 unsigned32 read-only
This value is a unique index for the decomposed AS Path in the bgpM2AsPathTable. It is assigned by the agent at the point of creation of the bgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of bgpM2AsPathIndex row instance values across rows of the bgpM2AsPathTable.
         bgpM2AsPathTable 1.3.6.1.2.1.1.3.6 no-access
The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer.
             bgpM2AsPathTableEntry 1.3.6.1.2.1.1.3.6.1 no-access
Information about an AS path provided with a path to a network.
                 bgpM2AsPathSegmentIndex 1.3.6.1.2.1.1.3.6.1.1 unsigned32 read-only
A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of bgpM2AsPathType, which should be the same value for each bgpM2AsPathTable entry indexed by the same (bgpM2PathAttrIndex, bgpM2AsPathIndex) pair).
                 bgpM2AsPathElementIndex 1.3.6.1.2.1.1.3.6.1.2 unsigned32 read-only
A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.
                 bgpM2AsPathType 1.3.6.1.2.1.1.3.6.1.3 integer read-only
The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (bgpM2PathAttrIndex, bgpM2AsPathIndex) index pair will have their bgpM2AsPathType set to the same value. The values for bgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document. Enumeration: 'confedSequence': 3, 'asSet': 1, 'confedSet': 4, 'asSequence': 2.
                 bgpM2AsPathElementValue 1.3.6.1.2.1.1.3.6.1.4 inetautonomoussystemnumber read-only
An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by bgpM2AsPathIndex and bgpM2AsPathType (and, in sequence of the other table rows with the same value of bgpM2PathAttrIndex and bgpM2AsPathIndex).
         bgpM2PathAttrUnknownTable 1.3.6.1.2.1.1.3.7 no-access
The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for bgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that bgpM2PathAttrIndex value in the bgpM2PathAttrTable).
             bgpM2PathAttrUnknownEntry 1.3.6.1.2.1.1.3.7.1 no-access
Information about an unknown attribute provided with a path to a network.
                 bgpM2PathAttrUnknownIndex 1.3.6.1.2.1.1.3.7.1.1 unsigned32 read-only
An integer index for a row in this table.
                 bgpM2PathAttrUnknownType 1.3.6.1.2.1.1.3.7.1.2 unsigned32 read-only
The attribute type advertised with this unknown attribute by the peer.
                 bgpM2PathAttrUnknownValue 1.3.6.1.2.1.1.3.7.1.3 octet string read-only
Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.
         bgpM2PathAttrExtensions 1.3.6.1.2.1.1.3.8
             bgpM2PathAttrNonCapExts 1.3.6.1.2.1.1.3.8.1
                 bgpM2PathAttrExtCommTable 1.3.6.1.2.1.1.3.8.1.1 no-access
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for bgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that bgpM2PathAttrIndex value in the bgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published.
                     bgpM2PathAttrExtCommEntry 1.3.6.1.2.1.1.3.8.1.1.1 no-access
Information about an extended community association provided with a path to a network.
                         bgpM2PathAttrExtCommIndex 1.3.6.1.2.1.1.3.8.1.1.1.1 unsigned32 read-only
An integral index for a row in this table.
                         bgpM2PathAttrExtCommValue 1.3.6.1.2.1.1.3.8.1.1.1.2 bgpm2extendedcommunity read-only
A value representing an extended community which was received with the route implied by the bgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics.
                 bgpM2PathAttrCommunityExts 1.3.6.1.2.1.1.3.8.1.1997
                           bgpM2PathAttrCommTable 1.3.6.1.2.1.1.3.8.1.1997.1 no-access
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for bgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that bgpM2PathAttrIndex value in the bgpM2PathAttrTable).
                               bgpM2PathAttrCommEntry 1.3.6.1.2.1.1.3.8.1.1997.1.1 no-access
Information about a community association provided with a path to a network.
                                   bgpM2PathAttrCommIndex 1.3.6.1.2.1.1.3.8.1.1997.1.1.1 unsigned32 read-only
An integer index for a row in this table.
                                   bgpM2PathAttrCommValue 1.3.6.1.2.1.1.3.8.1.1997.1.1.2 bgpm2community read-only
A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
                 bgpM2LinkLocalNextHopTable 1.3.6.1.2.1.1.3.8.1.2545 no-access
Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers.
                           bgpM2LinkLocalNextHopEntry 1.3.6.1.2.1.1.3.8.1.2545.1 no-access
Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops.
                               bgpM2LinkLocalNextHopPresent 1.3.6.1.2.1.1.3.8.1.2545.1.1 truthvalue read-only
This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.
                               bgpM2LinkLocalNextHop 1.3.6.1.2.1.1.3.8.1.2545.1.2 inetaddress read-only
This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if bgpM2LinkLocalNextHopPresent is true.
                 bgpM2PathAttrRouteReflectionExts 1.3.6.1.2.1.1.3.8.1.2796
                           bgpM2PathAttrOriginatorIdTable 1.3.6.1.2.1.1.3.8.1.2796.1 no-access
Per prefix data pertinent to advertisement of a network prefix through an originator.
                               bgpM2PathAttrOriginatorIdEntry 1.3.6.1.2.1.1.3.8.1.2796.1.1 no-access
Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector.
                                   bgpM2PathAttrOriginatorId 1.3.6.1.2.1.1.3.8.1.2796.1.1.1 bgpm2identifier read-only
The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.
                           bgpM2PathAttrClusterTable 1.3.6.1.2.1.1.3.8.1.2796.2 no-access
The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for bgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that bgpM2PathAttrIndex value in the bgpM2PathAttrTable).
                               bgpM2PathAttrClusterEntry 1.3.6.1.2.1.1.3.8.1.2796.2.1 no-access
Information about a cluster traversal provided with a path to a network.
                                   bgpM2PathAttrClusterIndex 1.3.6.1.2.1.1.3.8.1.2796.2.1.1 unsigned32 read-only
An integral index for a row in this table.
                                   bgpM2PathAttrClusterValue 1.3.6.1.2.1.1.3.8.1.2796.2.1.2 bgpm2identifier read-only
A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of bgpM2PathAttrClusterTable rows (and the bgpM2PathAttrClusterValues in each row) as returned for a given bgpM2PathAttrIndex value, and the monotonically increasing sequence of bgpM2PathAttrClusterIndex values for that bgpM2PathAttrIndex.
             bgpM2PathAttrCapExts 1.3.6.1.2.1.1.3.8.2
     bgpM2Conformance 1.3.6.1.2.1.1.4
         bgpM2MIBCompliances 1.3.6.1.2.1.1.4.1
             bgpM2MIBCompliance 1.3.6.1.2.1.1.4.1.1
The compliance statement for entities which implement the BGP4 mib.
         bgpM2MIBGroups 1.3.6.1.2.1.1.4.2
             bgpM2CommunitiesGroup 1.3.6.1.2.1.1.4.2.1
Objects associated with BGP communities.
             bgpM2ExtCommunitiesGroup 1.3.6.1.2.1.1.4.2.2
Objects associated with BGP extended communities.
             bgpM2RouteReflectionGroup 1.3.6.1.2.1.1.4.2.3
Objects associated with BGP route reflection.
             bgpM2AsConfederationGroup 1.3.6.1.2.1.1.4.2.4
Objects associated with BGP confederation membership.
             bgpM2TimersGroup 1.3.6.1.2.1.1.4.2.5
Objects associated with BGP peering timers.
             bgpM2CountersGroup 1.3.6.1.2.1.1.4.2.6
Objects to count discrete events and exchanges on BGP sessions.
             bgpM2CapabilitiesGroup 1.3.6.1.2.1.1.4.2.7
Objects to report capabilities as received on BGP sessions.
             bgpM2AsPathGroup 1.3.6.1.2.1.1.4.2.8
Objects to report AS paths received on BGP NLRIs.
             bgpM2As4byteGroup 1.3.6.1.2.1.1.4.2.9
AS Size objects.
             bgpM2BaseGroup 1.3.6.1.2.1.1.4.2.10
Basic objects in local BGP implementation.
             bgpM2ErrorsGroup 1.3.6.1.2.1.1.4.2.11
Errors received on BGP peering sessions.
             bgpM2PeerGroup 1.3.6.1.2.1.1.4.2.12
Core object types on BGP peering sessions.
             bgpM2PathAttributesGroup 1.3.6.1.2.1.1.4.2.13
Attributes received on BGP peering sessions.
             bgpM2PeerConfigurationGroup 1.3.6.1.2.1.1.4.2.14
Configuration objects for BGP peers.
             bgpM2PeerRouteReflectorCfgGroup 1.3.6.1.2.1.1.4.2.15
Configuration objects for BGP peers that support route reflection.
             bgpM2PeerAsConfederationCfgGroup 1.3.6.1.2.1.1.4.2.16
Configuration objects for BGP peers that support BGP confederations.
             bgpM2MIBNotificationsGroup 1.3.6.1.2.1.1.4.2.17
This group contains objects for notifications supported by this mib module.
             bgpM2Rfc2545Group 1.3.6.1.2.1.1.4.2.18
This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545.