BASIS-RAS-DISK-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: BASIS-RAS-DISK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, BASIS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rasDsk 1.3.6.1.4.1.351.110.6.2
     rasDskStatus 1.3.6.1.4.1.351.110.6.2.1 integer read-write
Indicates whether the RAS Disk diagnostics has been Enabled or not. Enumeration: 'enable': 1, 'disable': 2.
     dskHealth 1.3.6.1.4.1.351.110.6.2.2 integer read-only
Shows the Status of the Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the ASC. The Status is PASS if there are no Corrupted files in the Disk AND the number of Bad Sectors is within the threshold value. If the Disk has one or more Corrupted files OR if the Number of Bad Sectors exceeds the threshold value, the Status is FAIL. If Diagnostics is going on, the Status is TestInProgress. Status will be UNKNOWN until the diagnostics starts for the first time. Enumeration: 'fail': 2, 'unknown': 3, 'testInProgress': 4, 'pass': 1.
     standbyDskHealth 1.3.6.1.4.1.351.110.6.2.3 integer read-only
Shows the Status of the Standby ASC Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the Standby ASC. The Status is UNKNOWN, if there is no Standby ASC in the shelf. Enumeration: 'fail': 2, 'unknown': 3, 'testInProgress': 4, 'pass': 1.
     wakeupInterval 1.3.6.1.4.1.351.110.6.2.4 integer read-write
Indicates the RAS Disk diagnostics task Wake up time period, in HOURS. This Interval is configurable between 12 hours and 7 days. If RAS Disk diagnostics is Enabled, the diagnostics starts whenever the wakeupInterval is elapsed. If RAS Disk diagnostics is Enabled AND if the CLI cnfrasdsk is executed, then the Disk diagnostics starts immediately.
     lastTime 1.3.6.1.4.1.351.110.6.2.5 displaystring read-only
Shows the Time when the RAS Disk diagnostics was Last done. The format is DD MONTH HH:MM:SS.
     numBadSectors 1.3.6.1.4.1.351.110.6.2.6 integer read-only
Indicates the Number of Bad Sectors found in the Disk.
     crptdPRIfiles 1.3.6.1.4.1.351.110.6.2.7 integer read-only
Indicates the Number of SM configuration files, corrupted.
     crptdFWfiles 1.3.6.1.4.1.351.110.6.2.8 integer read-only
Indicates the Number of FirmWare files, corrupted.