BAS-TG-MIB: View SNMP OID List / Download MIB

VENDOR: BROADBAND ACCESS SYSTEMS


 Home MIB: BAS-TG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, BAS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 basTrafGenMIB 1.3.6.1.4.1.3493.2.13.1
The MIB module defines the configuration MIB objects for Broadband Access Systems, Inc. Traffic Generation extensions.
     basTrafGenTable 1.3.6.1.4.1.3493.2.13.1.1 no-access
A list of traffic generation entries. The number of entries is given by the value of ifNumber.
         basTrafGenEntry 1.3.6.1.4.1.3493.2.13.1.1.1 no-access
An entry containing management information applicable to a particular traffic generation.
             basTrafGenIndex 1.3.6.1.4.1.3493.2.13.1.1.1.1 integer read-only
Used to create an instance of GenTraff.
             basTrafGenTransport 1.3.6.1.4.1.3493.2.13.1.1.1.2 integer read-only
Transport to use. Enumeration: 'basTrafTcp': 3, 'basTrafIp': 1, 'basTrafUdp': 2.
             basTrafGenPort 1.3.6.1.4.1.3493.2.13.1.1.1.3 integer read-only
Port to use.
             basTrafGenStart 1.3.6.1.4.1.3493.2.13.1.1.1.4 integer read-only
Stop and start traffic. Enumeration: 'basTrafStart': 1, 'basTrafStop': 2.
             basTrafGenRate 1.3.6.1.4.1.3493.2.13.1.1.1.5 integer read-only
Rate of sending max means no delay between transmissions. 1sec means send one packet per second. Enumeration: 'basTran1sec': 2, 'basTranMax': 1.
             basTrafGenDest 1.3.6.1.4.1.3493.2.13.1.1.1.6 ipaddress read-only
Destination IP address.
             basTrafGenSrc 1.3.6.1.4.1.3493.2.13.1.1.1.7 ipaddress read-only
Destination IP address.
             basTrafGenIn 1.3.6.1.4.1.3493.2.13.1.1.1.8 counter32 read-only
Received packets.
             basTrafGenOut 1.3.6.1.4.1.3493.2.13.1.1.1.9 counter32 read-only
Sent packets.
             basTrafGenSeqError 1.3.6.1.4.1.3493.2.13.1.1.1.10 counter32 read-only
Sequence error count.
             basTrafGenSize 1.3.6.1.4.1.3493.2.13.1.1.1.11 integer read-only
Packet size.
             basTrafGenPattern 1.3.6.1.4.1.3493.2.13.1.1.1.12 integer read-only
32 bit pattern to send.
             basTrafGenReset 1.3.6.1.4.1.3493.2.13.1.1.1.13 integer read-only
Status.
             basTrafGenStatus 1.3.6.1.4.1.3493.2.13.1.1.1.14 rowstatus read-only
Status.