BAS-CMTS-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: BROADBAND ACCESS SYSTEMS


 Home MIB: BAS-CMTS-CONFIG-MIB
Download as:   
SNMPv2-CONF, BAS-ALIAS-DOCS-IF-MIB, IF-MIB, SNMPv2-SMI, BAS-MIB, DOCS-IF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 basCmtsConfigMib 1.3.6.1.4.1.3493.2.4.1
This MIB module defines the configuration MIB objects for a Broadband Access System CMTS.
     basCmtsConfigObjects 1.3.6.1.4.1.3493.2.4.1.1
         basCmtsHeadEndTable 1.3.6.1.4.1.3493.2.4.1.1.1 no-access
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
             basCmtsHeadEndEntry 1.3.6.1.4.1.3493.2.4.1.1.1.1 no-access
An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                 basCmtsHeDsChanId 1.3.6.1.4.1.3493.2.4.1.1.1.1.1 bascmtsbyte read-write
CMTS downstream channel ID.
                 basCmtsHeHwMapTimerPeriodMicrosec 1.3.6.1.4.1.3493.2.4.1.1.1.1.2 bascmtsuint16 read-write
CMTS hardware Map timer period interval, in microseconds.
                 basCmtsHeImMapTimerPeriodMillisec 1.3.6.1.4.1.3493.2.4.1.1.1.1.3 bascmtsuint16 read-write
CMTS initial maintenance timer period interval, in milliseconds.
                 basCmtsHePerRngTimerPeriodSec 1.3.6.1.4.1.3493.2.4.1.1.1.1.4 bascmtsuint16 read-write
CMTS periodic ranging timer period interval, in seconds.
                 basCmtsHeUcdTimerPerMillisec 1.3.6.1.4.1.3493.2.4.1.1.1.1.5 bascmtsuint16 read-write
CMTS UCD periodic timer period interval, in milliseconds.
                 basCmtsHeMapMode 1.3.6.1.4.1.3493.2.4.1.1.1.1.6 bascmtsheadendmapmode read-write
CMTS mape mode, either Normal or Scripted maps for test mode. Defaults to normal, free-running mode.
                 basCmtsHeMacAddr 1.3.6.1.4.1.3493.2.4.1.1.1.1.7 bascmtsheadendmacaddr read-only
CMTS HeadEndMgr Mac address.
                 basCmtsHeLenAuthString 1.3.6.1.4.1.3493.2.4.1.1.1.1.8 bascmtsbyte read-write
CMTS HeadEndMgr authorization string length.
                 basCmtsHeAuthString 1.3.6.1.4.1.3493.2.4.1.1.1.1.9 bascmtsheadendauthstring read-write
CMTS HeadEndMgr authorization string.
                 basCmtsHeRowAction 1.3.6.1.4.1.3493.2.4.1.1.1.1.10 bascmtsrowaction read-write
An action object used to effect an action.
                 basCmtsHePlantPropDelay 1.3.6.1.4.1.3493.2.4.1.1.1.1.11 bascmtsuint32 read-write
Plant propagation delay in microseconds.
                 basCmtsHeSupplMapLeadDelay 1.3.6.1.4.1.3493.2.4.1.1.1.1.12 bascmtsint32 read-write
Supplemental map lead delay.
         basCmtsMacTable 1.3.6.1.4.1.3493.2.4.1.1.2 no-access
A list of BAS Mac settings.
             basCmtsMacEntry 1.3.6.1.4.1.3493.2.4.1.1.2.1 no-access
An entry containing BAS Mac configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                 basCmtsMacNumUsBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.1 bascmtsuint16 read-write
Number of buffers allocated to handle upstream cable modem traffic, both control message and data message traffic.
                 basCmtsMacNumDsMsgBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.2 bascmtsuint16 read-write
Number of buffers allocated to handle downstream cable modem control message traffic.
                 basCmtsMacNumDsDataBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.3 bascmtsuint16 read-write
Number of buffers allocated to handle downstream cable modem data message traffic.
                 basCmtsMacNumIpBuffers 1.3.6.1.4.1.3493.2.4.1.1.2.1.4 bascmtsuint16 read-write
Number of buffers allocated to handle downstream cable modem data message traffic. If an IP packet is addressed to the CMTS Mac address, an IP Buffer is allocated to send the data to the local host IP stack (bcmnet_fd). TBD - We probably don't need this.
                 basCmtsMacPciDmaSize 1.3.6.1.4.1.3493.2.4.1.1.2.1.5 bascmtsbyte read-write
Maximum size of PCI bus DMA transaction, required by BCM3210.
                 basCmtsMacUpdateFirstParticleLast 1.3.6.1.4.1.3493.2.4.1.1.2.1.6 truthvalue read-write
MAC control register option flag: if true, then update first particle last.
                 basCmtsMacDirectModeDma 1.3.6.1.4.1.3493.2.4.1.1.2.1.7 truthvalue read-write
MAC control register option flag: if true, then enable direct mode DMA.
                 basCmtsMacPackedPart 1.3.6.1.4.1.3493.2.4.1.1.2.1.8 truthvalue read-write
Packed particle boolean, FALSE indicates 1 particle per packet.
                 basCmtsMacPackedPartOffset 1.3.6.1.4.1.3493.2.4.1.1.2.1.9 bascmtsuint16 read-write
Packed particle offset, offset for header length in packed particle.
                 basCmtsMacSpiClkDivider 1.3.6.1.4.1.3493.2.4.1.1.2.1.10 bascmtsbyte read-write
Specifies the SPI Clock Divider.
                 basCmtsMacSyncRate 1.3.6.1.4.1.3493.2.4.1.1.2.1.11 bascmtsuint32 read-write
Specifies the downstream Sync control message interval. Units are millisec. Default rate is 10 millisec.
                 basCmtsMacRowAction 1.3.6.1.4.1.3493.2.4.1.1.2.1.12 bascmtsrowaction read-write
Row status.
         basCmtsMacDsHwTable 1.3.6.1.4.1.3493.2.4.1.1.3 no-access
A list of Bas Downstream settings.
             basCmtsMacDsHwEntry 1.3.6.1.4.1.3493.2.4.1.1.3.1 no-access
An entry containing Bas Mac DsHw configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                 basCmtsMacDsHwInterleaverDepth 1.3.6.1.4.1.3493.2.4.1.1.3.1.1 integer read-write
Specifies Mac DsHw interleaver depth. Enumeration: 'basCmtsMacDsHwIntDepth128': 128, 'basCmtsMacDsHwIntDepth32': 32, 'basCmtsMacDsHwIntDepth16': 16, 'basCmtsMacDsHwIntDepth64': 64, 'basCmtsMacDsHwIntDepth8': 8.
                 basCmtsMacDsHwQamctl 1.3.6.1.4.1.3493.2.4.1.1.3.1.2 integer read-write
Specifies Mac DsHw QAM control. 0x03 = 64 QAM 0x05 = 256 QAM. Enumeration: 'basCmtsMacDsHwQamctl256QAM': 5, 'basCmtsMacDsHwQamctl64QAM': 3.
                 basCmtsMacDsHwSymbolRate 1.3.6.1.4.1.3493.2.4.1.1.3.1.3 bascmtsuint32 read-write
Specifies Mac DsHw symbol rate, in Units Baud. Typical values: 64 QAM - 5056941 baud (default) 256 QAM - 5360537 baud
                 basCmtsMacDsHwIfFreq 1.3.6.1.4.1.3493.2.4.1.1.3.1.4 bascmtsuint32 read-write
Specifies Mac DsHw downstream channel frequency, in Hz.
                 basCmtsMacDsHwRefFreq 1.3.6.1.4.1.3493.2.4.1.1.3.1.5 bascmtsuint32 read-write
Specifies Mac DsHw reference frequency, in Hz.
                 basCmtsMacDsHwOscMultFactor 1.3.6.1.4.1.3493.2.4.1.1.3.1.6 bascmtsbyte read-write
Specifies Mac DsHw Osc Mult Factor. For Bcm3210, use: refFreq (MHz) MultFactor ------------- ---------- 114.0 1 28.5 4 28.322 4 20.48 6
         basCmtsUpstreamChannelTable 1.3.6.1.4.1.3493.2.4.1.1.4 no-access
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
             basCmtsUpstreamChannelEntry 1.3.6.1.4.1.3493.2.4.1.1.4.1 no-access
An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129).
                 basCmtsUpChannelMslotPerTick 1.3.6.1.4.1.3493.2.4.1.1.4.1.1 bascmtsbyte read-write
Minislot period, in ticks.
                 basCmtsUpChannelSymbolRate160KSymPerSec 1.3.6.1.4.1.3493.2.4.1.1.4.1.2 bascmtsbyte read-write
Upstream channel symbol rate, in 1609KSym/second.
                 basCmtsUpChannelLenPreamblePattern 1.3.6.1.4.1.3493.2.4.1.1.4.1.3 bascmtsbyte read-only
Upstream channel preamble pattern length.
                 basCmtsUpChannelPreamblePattern 1.3.6.1.4.1.3493.2.4.1.1.4.1.4 bascmtsupchannelpreamblepattern read-only
Upstream channel preamble pattern.
                 basCmtsUpChannelRowAction 1.3.6.1.4.1.3493.2.4.1.1.4.1.5 bascmtsrowaction read-write
Row status.
                 basCmtsUpChannelReceivePower 1.3.6.1.4.1.3493.2.4.1.1.4.1.6 tenthdbmv read-write
Receive Power level that is desired at the CMTS in TenthdbMV
         basCmtsModulationTable 1.3.6.1.4.1.3493.2.4.1.1.5 no-access
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
             basCmtsModulationEntry 1.3.6.1.4.1.3493.2.4.1.1.5.1 no-access
An entry containing HeadEndMgr configuration settings.
                 basCmtsModUwLenBytes 1.3.6.1.4.1.3493.2.4.1.1.5.1.1 bascmtsbyte read-write
Length of unique word pattern, in bytes. [Note = Supported values are 1-3 for BCM3137. Default value is 1, equal to 4 symbols.
                 basCmtsModUwPattern 1.3.6.1.4.1.3493.2.4.1.1.5.1.2 bascmtsmodulationwspattern read-write
Content of unique word pattern. The number of bytes in the unique word pattern which are relevant is determined by basCmtsModUwLenBytes.
                 basCmtsModUwDetectionWindow 1.3.6.1.4.1.3493.2.4.1.1.5.1.3 bascmtsbyte read-write
Time window around a nominal detection time in which the UW detector is enabled.
                 basCmtsModUwMismatchThresholdBits 1.3.6.1.4.1.3493.2.4.1.1.5.1.4 bascmtsbyte read-write
Specifies precision of match between unique word pattern and incoming burst by specifying the number of bits which are allowed to NOT match.
                 basCmtsModPreambleValueOffset 1.3.6.1.4.1.3493.2.4.1.1.5.1.5 bascmtsuint16 read-only
Offset into preamble where value bits, or pattern, begins.
         basCmtsUsHwTable 1.3.6.1.4.1.3493.2.4.1.1.6 no-access
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
             basCmtsUsHwEntry 1.3.6.1.4.1.3493.2.4.1.1.6.1 no-access
An entry containing HeadEndMgr configuration settings.
                 basCmtsUsHwTestProbe 1.3.6.1.4.1.3493.2.4.1.1.6.1.1 bascmtsbyte read-write
Bas Bcm3137 test/probe mode register.
                 basCmtsUsHwGenCfg1 1.3.6.1.4.1.3493.2.4.1.1.6.1.2 bascmtsbyte read-write
Bas Bcm3137 general configuration register 1.
                 basCmtsUsHwGenCfg2 1.3.6.1.4.1.3493.2.4.1.1.6.1.3 bascmtsbyte read-write
Bas Bcm3137 general configuration register 2.
                 basCmtsUsHwPreambleCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.4 bascmtsbyte read-write
Bas Bcm3137 preamble process control register.
                 basCmtsUsHwCarrAcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.5 bascmtsbyte read-write
Bas Bcm3137 carrier acquisition loop coefficients.
                 basCmtsUsHwCarrTcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.6 bascmtsbyte read-write
Bas Bcm3137 carrier tracking loop coefficients.
                 basCmtsUsHwBaudAtcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.7 bascmtsbyte read-write
Bas Bcm3137 baud loop acquisition/tracking coefficients.
                 basCmtsUsHwBaudIntcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.8 bascmtsbyte read-write
Bas Bcm3137 baud loop integrator coefficients.
                 basCmtsUsHwMaxPwrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.9 bascmtsbyte read-write
Bas Bcm3137 maximum power level threshold.
                 basCmtsUsHwMinPwrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.10 bascmtsuint16 read-write
Bas Bcm3137 minimum power level threshold.
                 basCmtsUsHwTimeErrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.11 bascmtsuint16 read-write
Bas Bcm3137 burst timing error threshold.
                 basCmtsUsHwAdcClipCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.12 bascmtsbyte read-write
Bas Bcm3137 ADC clipping detection control register.
                 basCmtsUsHwLoopCheck 1.3.6.1.4.1.3493.2.4.1.1.6.1.13 bascmtsbyte read-write
Bas Bcm3137 loop checking detection control register.
                 basCmtsUsHwSlcrErrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.14 bascmtsbyte read-write
Bas Bcm3137 slicer error threshold.
                 basCmtsUsHwAfltSelThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.15 bascmtsbyte read-write
Bas Bcm3137 amplitude filter selection threshold.
                 basCmtsUsHwBurstGain 1.3.6.1.4.1.3493.2.4.1.1.6.1.16 bascmtsuint16 read-write
Bas Bcm3137 burst gain adjusting factor register.
                 basCmtsUsHwLoopCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.17 bascmtsbyte read-write
Bas Bcm3137 loop control register.
                 basCmtsUsHwEqRsCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.18 bascmtsbyte read-write
Bas Bcm3137 equalizer/RS decoder control register.
                 basCmtsUsHwEqSteps 1.3.6.1.4.1.3493.2.4.1.1.6.1.19 bascmtsbyte read-write
Bas Bcm3137 equalizer adaptation step size register.
         basCmtsUsMapTable 1.3.6.1.4.1.3493.2.4.1.1.7 no-access
A Upstream Channel Map Maker Settings.
             basCmtsUsMapEntry 1.3.6.1.4.1.3493.2.4.1.1.7.1 no-access
An entry containing Upstream Channel Map Maker configuration settings.
                 basCmtsUsMapMaxMapLenHwMapPeriods 1.3.6.1.4.1.3493.2.4.1.1.7.1.1 bascmtsuint16 read-write
Bas Upstream Channel MapMaker maximum map length, in units of hardware map timer periods. [Note: Set this value large enough to handle large packets, but small enough to not let latency get too large when channel is busy.]
                 basCmtsUsMapInitMainRegionSizeMicrosec 1.3.6.1.4.1.3493.2.4.1.1.7.1.2 bascmtsuint16 read-write
Bas Upstream Channel MapMaker size of Initial Maint contention region, in microseconds. [Note: Maps with Initial Maint regions are sent periodically. Most maps do not have an Initial Maint region.]
                 basCmtsUsMapNewUcdGrantSizeMicrosec 1.3.6.1.4.1.3493.2.4.1.1.7.1.3 bascmtsuint16 read-write
Bas Upstream Channel MapMaker new UCD grant size. After a UCD change, this specifies the size of grant to null sid (which functions as a delay for CM's to digest the new UCD), in microseconds.
                 basCmtsUsMapMaxDeferredRngIE 1.3.6.1.4.1.3493.2.4.1.1.7.1.4 bascmtsuint16 read-write
Bas Upstream Channel MapMaker maximum number of deferred ranging invitations per map.
                 basCmtsUsMapMapLeadTimeMillisec 1.3.6.1.4.1.3493.2.4.1.1.7.1.5 bascmtsuint16 read-only
Bas Upstream Channel MapMaker map lead time, in milliseconds.
                 basCmtsUsMapRequestLimitMslot 1.3.6.1.4.1.3493.2.4.1.1.7.1.6 bascmtsuint16 read-write
Bas Upstream Channel MapMaker maximum size for request contention region, in mini-slots.
                 basCmtsUsMapMapLeadTime 1.3.6.1.4.1.3493.2.4.1.1.7.1.7 bascmtsuint16 read-only
Bas Upstream Channel MapMaker map lead time, in microseconds.
         basCmtsUsRngTable 1.3.6.1.4.1.3493.2.4.1.1.8 no-access
A Upstream Channel Range Finder Settings.
             basCmtsUsRngEntry 1.3.6.1.4.1.3493.2.4.1.1.8.1 no-access
An entry containing Upstream Channel Range Finder configuration settings.
                 basCmtsUsRngTimingOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.1 bascmtsuint32 read-write
Bas Upstream Channel RangeFinder timing offset threshold. If timing offset reported by MAC chip is <= this threshold value, then timing adjustment may be stopped. Units are 10.24 MHz clock cycles.
                 basCmtsUsRngFreqOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.2 bascmtsuint16 read-write
Bas Upstream Channel RangeFinder frequency offset threshold. If frequency offset reported by MAC chip is <= this threshold value, then frequency adjustment may be stopped. (Hz units).
                 basCmtsUsRngPowerOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.3 bascmtsbyte read-write
Bas Upstream Channel RangeFinder power offset threshold. If power level offset reported by MAC chip is <= this threshold value, then power level adjustment may be stopped. (1/4 dB units).
                 basCmtsUsRngPowerDesired 1.3.6.1.4.1.3493.2.4.1.1.8.1.4 bascmtsuint16 read-write
Bas Upstream Channel RangeFinder power desired. Desired linear power level. Used as reference when computing power adjustment. Units are a Broadcom defined (16) bit linear scale.
                 basCmtsUsRngMaxIgnoredInvitations 1.3.6.1.4.1.3493.2.4.1.1.8.1.5 bascmtsuint16 read-only
Bas Upstream Channel RangeFinder maximum ignored invitations. Maximum ranging invitations that a CM may ignore before being considered quiet.
                 basCmtsUsRngCmRngInviteTimeout 1.3.6.1.4.1.3493.2.4.1.1.8.1.6 bascmtsuint16 read-write
Bas Upstream Channel RangeFinder cable modem range invite timeout. Minimum time allowed for a CM following receipt of a RNG-RSP before it is expected to reply to an invitation to range request, in milliseconds.
                 basCmtsUsRngMaxPowerAdjQtrdb 1.3.6.1.4.1.3493.2.4.1.1.8.1.7 bascmtsbyte read-write
Bas Upstream Channel RangeFinder maximum power adjustment for a particular RNG-RSP message, in 1/4dB units.
                 basCmtsUsRngZeroPowerAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.8 truthvalue read-write
Bas Upstream Channel RangeFinder zero power adjustment. If true, power adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
                 basCmtsUsRngZeroTimingAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.9 truthvalue read-write
Bas Upstream Channel RangeFinder zero timing adjustment. If true, timing adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
                 basCmtsUsRngZeroFreqAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.10 truthvalue read-write
Bas Upstream Channel RangeFinder zero frequency adjustment. If true, frequency adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
                 basCmtsUsRngRefPowerLevel 1.3.6.1.4.1.3493.2.4.1.1.8.1.11 unsigned32 read-write
Reference power level for this upstream channel.
                 basCmtsUsRngCmPeriodicRngInviteTimeout 1.3.6.1.4.1.3493.2.4.1.1.8.1.12 bascmtsuint16 read-write
Used to space the ranging invitations, if the modem has completed ranging.
         basCmtsServiceTable 1.3.6.1.4.1.3493.2.4.1.1.9 no-access
The Service Table per MAC IF
             basCmtsServiceEntry 1.3.6.1.4.1.3493.2.4.1.1.9.1 no-access
An entry containing information for a particular SID
                 basCmtsServiceMacAddress 1.3.6.1.4.1.3493.2.4.1.1.9.1.1 macaddress read-only
MAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface.
                 basCmtsServiceIpAddress 1.3.6.1.4.1.3493.2.4.1.1.9.1.2 ipaddress read-only
IP address of The CMTS.
                 basCmtsServiceAuthState 1.3.6.1.4.1.3493.2.4.1.1.9.1.3 integer read-only
Auth State Object. Enumeration: 'permanent': 3, 'initial': 1, 'temporary': 2, 'auth': 4, 'max': 5.
                 basCmtsServiceFilter 1.3.6.1.4.1.3493.2.4.1.1.9.1.4 bascmtsuint16 read-write
The Service Filter Object
                 basCmtsServiceCurrentNumHost 1.3.6.1.4.1.3493.2.4.1.1.9.1.5 bascmtsuint32 read-only
The Current number of host.
                 basCmtsServiceMaxNumHost 1.3.6.1.4.1.3493.2.4.1.1.9.1.6 bascmtsuint32 read-only
The max number of host
                 basCmtsServiceOutOctets 1.3.6.1.4.1.3493.2.4.1.1.9.1.7 bascmtsuint32 read-only
The number of service out octets.
                 basCmtsServiceOutPackets 1.3.6.1.4.1.3493.2.4.1.1.9.1.8 bascmtsuint32 read-only
The number of service out packets.
                 basCmtsServiceInDiscards 1.3.6.1.4.1.3493.2.4.1.1.9.1.9 bascmtsuint32 read-only
The number of input packets discarded.
                 basCmtsServiceOutDiscards 1.3.6.1.4.1.3493.2.4.1.1.9.1.10 bascmtsuint32 read-only
The number of output packets discarded.
                 basCmtsServiceBwReqCount 1.3.6.1.4.1.3493.2.4.1.1.9.1.11 bascmtsuint32 read-only
The bandwidth request count for this service.
                 basCmtsServiceDataGrantCount 1.3.6.1.4.1.3493.2.4.1.1.9.1.12 bascmtsuint32 read-only
The data grant count for this service.
         basFlapControlTable 1.3.6.1.4.1.3493.2.4.1.1.10 no-access
Defines the flap table control settings per MAC IF. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties. Flapping refers to the rapid disconneting and reconneting of a cable modem that is having problems holding a connection. The flap list contains modem MAC addresses and logs the time of the most recent activity. The size and entry thresholds for the flap list can be configured.
               basFlapControlEntry 1.3.6.1.4.1.3493.2.4.1.1.10.1 no-access
Defines the flap table control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                   basFlapCtlClearFlag 1.3.6.1.4.1.3493.2.4.1.1.10.1.1 integer32 read-write
Flap list clear control flag. Setting this flag to 1 empties the flap-list table.
                   basFlapCtlMaxTableSize 1.3.6.1.4.1.3493.2.4.1.1.10.1.2 integer32 read-write
Specifies the max size of the flap-list table. Setting table size to 0 disables flap-list table maintenance.
                   basFlapCtlAgingThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.3 integer32 read-write
Specifies the number of days to age the cable modem from the flap list table. Setting the aging threshold to 0 results in modems never being aged from the table.
                   basFlapCtlInsTimeThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.4 integer32 read-write
Specifies the insertion time threshold, in seconds. This threshold controls the operation of a flapping modem detector. When the link establishment rate of a modem is shorter than the period defined by this parameter, the modem is placed in the flap list. Setting this parameter to 0 results in modems never being inserted in the flap list table due to short link establishment times.
                   basFlapCtlPowerAdjThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.5 integer32 read-write
Specifies the power-adjust threshold for recording a flap list event. When the power adjustment of a modem exceeds the threshold, the modem is placed in the flap list. Setting this parameter to 0 results in modems never being inserted in the flap list table due to power adjustments.
         basFlapTable 1.3.6.1.4.1.3493.2.4.1.1.11 no-access
Defines the flap table per MAC IF and MacAddr. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties. Flapping refers to the rapid disconnetin and reconneting of a cable modem that is having problems holding a connection. The flap list contains modem MAC addresses and logs the time of the most recent activity. The size and entry thresholds for the flap list can be configured.
               basFlapEntry 1.3.6.1.4.1.3493.2.4.1.1.11.1 no-access
Defines the flap table entries. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127) and for every MacAddress.
                   basFlapEntryMacAddress 1.3.6.1.4.1.3493.2.4.1.1.11.1.1 macaddress read-only
                   basFlapEntryUsChan 1.3.6.1.4.1.3493.2.4.1.1.11.1.2 counter32 read-only
Specifies the upstream channel the specified modem is currently using.
                   basFlapEntryInsertCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.3 counter32 read-only
Specifies the number of time the modem comes up and inserts itself into the network. It can indicate intermittent downstream sync loss or DHCP or modem registration problems.
                   basFlapEntryHitCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.4 counter32 read-only
Specifies the number of time the modem responds to MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distortion.
                   basFlapEntryMissCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.5 counter32 read-only
Specifies the number of time the modem misses the MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distortion.
                   basFlapEntryCRCErrCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.6 counter32 read-only
Specifies the number of Cyclic Redundancy Check errors from this modem. It can indicate intermittent upstream, laser clipping, or common-path distortion.
                   basFlapEntryPAdjCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.7 counter32 read-only
Specifies the number of times the headend instructed the modem to adjust transmit power more than the threshold-specified number of dB. It can indicate amplifier degradation, poor connections, or thermal sensitivity.
                   basFlapEntryFlapCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.8 counter32 read-only
Specifies the sum of basFlapEntryPAdjCount and basFlapEntryInsertCount.
                   basFlapEntryLastModemState 1.3.6.1.4.1.3493.2.4.1.1.11.1.9 integer read-only
Specifies the modem state when this modem last flapped. State is as specified in the RF Interface Specification, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response mesage to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM. Enumeration: 'rangingAborted': 3, 'ipComplete': 5, 'other': 1, 'rangingComplete': 4, 'ranging': 2, 'registrationComplete': 6, 'accessDenied': 7.
                   basFlapEntryInsertTime 1.3.6.1.4.1.3493.2.4.1.1.11.1.10 timeticks read-only
Specifies the most recent time that the modem was inserted in the network.
                   basFlapEntryRemoveTime 1.3.6.1.4.1.3493.2.4.1.1.11.1.11 timeticks read-only
Specifies the most recent time that the modem dropped the connection.
                   basFlapEntryLastBasModemState 1.3.6.1.4.1.3493.2.4.1.1.11.1.12 integer read-only
Specifies the modem state when this modem last flapped. State is as specified in the basCmtsCmStatusValue mib. Enumeration: 'basRegFailBadCOS': 14, 'basKekReject': 16, 'basRegisteredNetAccessEnabled': 9, 'basInitRngRcvd': 2, 'basRangingComplete': 4, 'basTimeReqRcvd': 7, 'basDhcpRequestRcvd': 6, 'basRegFailAuthFailure': 15, 'basRegisteredNetAccessDisabled': 10, 'basTftpReqRcvd': 8, 'basRanging': 3, 'basRegFailBadCMTSMic': 13, 'basModemOffline': 1, 'basTekReject': 17, 'basRegisteredBPITekAssigned': 12, 'basDhcpDiscoverRcvd': 5, 'basRegisteredBPIKekAssigned': 11.
         basCmtsCmStatusTable 1.3.6.1.4.1.3493.2.4.1.1.12 no-access
A list of CMTS CM status settings.
               basCmtsCmStatusEntry 1.3.6.1.4.1.3493.2.4.1.1.12.1 no-access
An entry in this table exists for each entry in the docsIfCmtsCmStatusTable.
                   basCmtsCmStatusAbortFlag 1.3.6.1.4.1.3493.2.4.1.1.12.1.1 integer32 read-write
CMTS CM status clear control flag. Setting this flag to 1 causes a Range-Abort message to be sent to the cable modem.
                   basCmtsCmStatusPrimarySid 1.3.6.1.4.1.3493.2.4.1.1.12.1.2 integer32 read-only
Primary SID of this modem.
                   basCmtsCmStatusValue 1.3.6.1.4.1.3493.2.4.1.1.12.1.3 integer read-only
Specifies the modem state. Enumeration: 'basRegFailBadCOS': 14, 'basKekReject': 16, 'basRegisteredNetAccessEnabled': 9, 'basInitRngRcvd': 2, 'basRangingComplete': 4, 'basTimeReqRcvd': 7, 'basDhcpRequestRcvd': 6, 'basRegFailAuthFailure': 15, 'basRegisteredNetAccessDisabled': 10, 'basTftpReqRcvd': 8, 'basRanging': 3, 'basRegFailBadCMTSMic': 13, 'basModemOffline': 1, 'basTekReject': 17, 'basRegisteredBPITekAssigned': 12, 'basDhcpDiscoverRcvd': 5, 'basRegisteredBPIKekAssigned': 11.
         basCmtsUsStatsTable 1.3.6.1.4.1.3493.2.4.1.1.13 no-access
Contains statistics for each upstream channel.
               basCmtsUsStatsEntry 1.3.6.1.4.1.3493.2.4.1.1.13.1 no-access
An entry containing statistics for each upstream channel.
                   basCmtsUsStatsClearFlag 1.3.6.1.4.1.3493.2.4.1.1.13.1.1 bascmtsuint32 read-write
Writing any value to this mib clears all stats in this table.
                   basCmtsUsStatsUSSlots 1.3.6.1.4.1.3493.2.4.1.1.13.1.2 bascmtsuint32 read-only
Number upstream data information elements in Maps.
                   basCmtsUsStatsNoUW 1.3.6.1.4.1.3493.2.4.1.1.13.1.3 bascmtsuint32 read-only
Number upstream data packets with FEC No Unique Word.
                   basCmtsUsStatsDataFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.4 bascmtsuint32 read-only
Number upstream data packets with FEC or HCS Error.
                   basCmtsUsStatsRequests 1.3.6.1.4.1.3493.2.4.1.1.13.1.5 bascmtsuint32 read-only
Number request slots allocated.
                   basCmtsUsStatsRequestColl 1.3.6.1.4.1.3493.2.4.1.1.13.1.6 bascmtsuint32 read-only
Number request slots with collisions.
                   basCmtsUsStatsReqFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.7 bascmtsuint32 read-only
Number request slots corrupted by bad FEC or HCS.
                   basCmtsUsStatsReqNoEnergy 1.3.6.1.4.1.3493.2.4.1.1.13.1.8 bascmtsuint32 read-only
Number request slots with no energy.
                   basCmtsUsStatsReqData 1.3.6.1.4.1.3493.2.4.1.1.13.1.9 bascmtsuint32 read-only
Number request/data slots allocated.
                   basCmtsUsStatsReqDataColl 1.3.6.1.4.1.3493.2.4.1.1.13.1.10 bascmtsuint32 read-only
Number request/data slots with collisions.
                   basCmtsUsStatsReqDataFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.11 bascmtsuint32 read-only
Number request/data slots with FEC or HCS errors.
                   basCmtsUsStatsReqDataNoEnergy 1.3.6.1.4.1.3493.2.4.1.1.13.1.12 bascmtsuint32 read-only
Number request/data slots with no energy.
                   basCmtsUsStatsRanging 1.3.6.1.4.1.3493.2.4.1.1.13.1.13 bascmtsuint32 read-only
Number upstream ranging packets received.
                   basCmtsUsStatsRangeFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.14 bascmtsuint32 read-only
Number ranging slots with FEC or HCS errors.
                   basCmtsUsStatsMapsTooLate 1.3.6.1.4.1.3493.2.4.1.1.13.1.15 bascmtsuint32 read-only
Number of Maps too late detected.
     basCmtsDecodeObjects 1.3.6.1.4.1.3493.2.4.1.2
         basCmtsPktDecodeControlTable 1.3.6.1.4.1.3493.2.4.1.2.1 no-access
A list of BAS cmts packet decode control objects.
             basCmtsPktDecodeControlEntry 1.3.6.1.4.1.3493.2.4.1.2.1.1 no-access
An entry containing BAS Packet decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                 basCmtsPktDecodeControlShowRx 1.3.6.1.4.1.3493.2.4.1.2.1.1.1 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlShowTx 1.3.6.1.4.1.3493.2.4.1.2.1.1.2 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlAnalyzeLevel 1.3.6.1.4.1.3493.2.4.1.2.1.1.3 integer read-write
Decode control on/off. Enumeration: 'lowLevel': 1, 'levelFour': 4, 'mediumLevel': 2, 'highLevel': 3.
                 basCmtsPktDecodeControlFilterUcd 1.3.6.1.4.1.3493.2.4.1.2.1.1.4 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterMap 1.3.6.1.4.1.3493.2.4.1.2.1.1.5 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterRngReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.6 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterRngRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.7 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterRegReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.8 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterRegRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.9 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterUccReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.10 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterUccRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.11 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterBpkmReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.12 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterBpkmRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.13 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterPdu 1.3.6.1.4.1.3493.2.4.1.2.1.1.14 truthvalue read-write
Decode control on/off.
                 basCmtsPktDecodeControlFilterBwReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.15 truthvalue read-write
Decode control on/off.
         basCmtsMapDecodeControlTable 1.3.6.1.4.1.3493.2.4.1.2.2 no-access
A list of BAS cmts map decode control objects.
             basCmtsMapDecodeControlEntry 1.3.6.1.4.1.3493.2.4.1.2.2.1 no-access
An entry containing BAS MAP decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
                 basCmtsMapDecodeControlTriggerMapPktCount 1.3.6.1.4.1.3493.2.4.1.2.2.1.1 integer read-write
Data trigger.
                 basCmtsMapDecodeControlTriggerDataGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.2 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerUcdChange 1.3.6.1.4.1.3493.2.4.1.2.2.1.3 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerShortGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.4 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerLongGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.5 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerInitMaint 1.3.6.1.4.1.3493.2.4.1.2.2.1.6 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerStationMaint 1.3.6.1.4.1.3493.2.4.1.2.2.1.7 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
                 basCmtsMapDecodeControlTriggerRequestIe 1.3.6.1.4.1.3493.2.4.1.2.2.1.8 integer read-write
Data trigger. Enumeration: 'triggerOff': 2, 'triggerOn': 1.
     basCmtsMacToSidObjects 1.3.6.1.4.1.3493.2.4.1.3
         basCmtsMacToSidTable 1.3.6.1.4.1.3493.2.4.1.3.1 no-access
A list of BAS cmts mac to sid objects.
             basCmtsMacToSidEntry 1.3.6.1.4.1.3493.2.4.1.3.1.1 no-access
An entry containing BAS CMTS MAC to SID settings.
                 basCmtsMacToSidMacAddr 1.3.6.1.4.1.3493.2.4.1.3.1.1.1 macaddress read-only
The MAC address of the host or the cable modem
                 basCmtsMacToSidServiceId 1.3.6.1.4.1.3493.2.4.1.3.1.1.2 integer32 read-only
The SID of the host or the cable modem derived from the MAC
                 basCmtsMacToSidType 1.3.6.1.4.1.3493.2.4.1.3.1.1.3 integer read-only
Type of device attached to this SID Enumeration: 'cableModem': 2, 'none': 1, 'host': 3.