Avaya-46xxIPTelephone-MIB: View SNMP OID List / Download MIB

VENDOR: AVAYA COMMUNICATION


 Home MIB: Avaya-46xxIPTelephone-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 avaya 1.3.6.1.4.1.6889
           avayaProducts 1.3.6.1.4.1.6889.1
               avayaipEndpointProd 1.3.6.1.4.1.6889.1.69
           avayaMibs 1.3.6.1.4.1.6889.2
               avayaipEndpointMIBs 1.3.6.1.4.1.6889.2.69
                     endpointMIB 1.3.6.1.4.1.6889.2.69.1
MIB Module for 46xx IP Telephones through Release 2.8 in accordance with 46xx Common Requirements COMPAS 75441, Issue 2.8. Copyright 2006 by Avaya Inc. All rights reserved.
                         endptID 1.3.6.1.4.1.6889.2.69.1.1
                             endptMARKET 1.3.6.1.4.1.6889.2.69.1.1.1 displaystring read-only
ID designation. This variable returns a string specifying 'domestic' or 'export'.
                             endptMODEL 1.3.6.1.4.1.6889.2.69.1.1.2 displaystring read-only
Model identifier. This variable returns a string of up to 8 ASCII characters.
                             endptMCIPADD 1.3.6.1.4.1.6889.2.69.1.1.3 displaystring read-only
List of call server addresses. This variable returns a sequence of IP addresses, in dotted-decimal orDNS format and separated by commas, of call server IP addresses available for use.
                             endptMCIPINUSE 1.3.6.1.4.1.6889.2.69.1.1.4 ipaddress read-only
Call server address. This variable returns a 4-octet string specifying the IP address of the call server currently in use.
                             endptMCPORT 1.3.6.1.4.1.6889.2.69.1.1.5 integer read-only
Transport layer port number. This variable returns an integer specifying the port number in use by the current call server.
                             endptPHONESN 1.3.6.1.4.1.6889.2.69.1.1.6 displaystring read-only
Housing serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the outside of the endpoint's housing.
                             endptPWBCC 1.3.6.1.4.1.6889.2.69.1.1.7 displaystring read-only
PWB comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode or version number of the printed wiring board of the endpoint.
                             endptPWBSN 1.3.6.1.4.1.6889.2.69.1.1.8 displaystring read-only
PWB serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the endpoint's printed wiring board, or N/A if the board has no serial number.
                             endptETHERADD 1.3.6.1.4.1.6889.2.69.1.1.9 octet string read-only
MAC address. This variable returns a 6-octet string specifying the endpoint's MAC address.
                             endptESPEED 1.3.6.1.4.1.6889.2.69.1.1.10 displaystring read-only
Ethernet interface speed. This variable returns a string specifying the endpoint's Ethernet interface speed in Mbps: '100', '10', or '0'.
                             endptIPADD 1.3.6.1.4.1.6889.2.69.1.1.11 ipaddress read-only
IP address. This variable returns a 4-octet string specifying the endpoint's current IP address.
                             endptDHCPLEASETIME 1.3.6.1.4.1.6889.2.69.1.1.12 integer32 read-only
Duration of IPADD lease. This variable returns an unsigned integer specifying the length of time of the IPADD lease, in seconds as received by DHCP option 51.
                             endptDHCPLEASERENEW 1.3.6.1.4.1.6889.2.69.1.1.13 integer32 read-only
Renewal time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to renew the IPADD lease, in seconds as received by DHCP option 58.
                             endptDHCPLEASEREBIND 1.3.6.1.4.1.6889.2.69.1.1.14 integer32 read-only
Rebind time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to rebind the IPADD lease, in seconds as received by DHCP option 59.
                             endptGIPADD 1.3.6.1.4.1.6889.2.69.1.1.15 displaystring read-only
List of router addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of routers available for use.
                             endptGIPINUSE 1.3.6.1.4.1.6889.2.69.1.1.16 ipaddress read-only
Router address. This variable returns a 4-octet string specifying the IP address of the router currently in use.
                             endptNETMASK 1.3.6.1.4.1.6889.2.69.1.1.17 ipaddress read-only
Subnet mask. This variable returns a 4-octet string specifying the subnet mask currently in use.
                             endptTFTPDIR 1.3.6.1.4.1.6889.2.69.1.1.18 displaystring read-only
TFTP server path name. This variable returns a string of 0-127 ASCII characters, specifying the path name currently prepended to file names used in TFTP read operations.
                             endptTFTPSRVR 1.3.6.1.4.1.6889.2.69.1.1.19 displaystring read-only
List of TFTP server addresses. This variable returns a sequence of IP addresses, in dotted-decimal orDNS format and separated by commas, of TFTP servers available for use.
                             endptTFTPINUSE 1.3.6.1.4.1.6889.2.69.1.1.20 ipaddress read-only
TFTP server address. This variable returns a 4-octet string specifying the IP address of the TFTP server currently in use (or all zeroes if no server used successfully during initialization).
                             endptBOOTNAME 1.3.6.1.4.1.6889.2.69.1.1.21 displaystring read-only
Boot code file ID. This variable returns a string specifying the boot code file used to initiate telephone operation.
                             endptAPPNAME 1.3.6.1.4.1.6889.2.69.1.1.22 displaystring read-only
Application file ID. This variable returns a string specifying the system-specific application file that should be used for telephone operation.
                             endptSSON 1.3.6.1.4.1.6889.2.69.1.1.23 integer read-only
Site-specific option number (SSON). This variable returns an integer between 128 and 254 inclusive, specifying the SSON in use. The default is 176.
                             endptBBURST 1.3.6.1.4.1.6889.2.69.1.1.24 integer read-only
Blackburst flag. This variable returns 0 if Blackburst is currently OFF, else 1.
                             endptHUBSTAT 1.3.6.1.4.1.6889.2.69.1.1.25 integer read-only
Hub flag. This variable has been superseded by endptPHY2STAT.
                             endptDSCPAUD 1.3.6.1.4.1.6889.2.69.1.1.26 integer read-only
DSCP for audio. This variable specifies the Differentiated Services Code Point for audio currently in use (between 0 and 63 inclusive).
                             endptDSCPSIG 1.3.6.1.4.1.6889.2.69.1.1.27 integer read-only
DSCP for signaling. This variable specifies the Differentiated Services Code Point for signaling currently in use (between 0 and 63 inclusive).
                             endptL2Q 1.3.6.1.4.1.6889.2.69.1.1.28 integer read-only
802.1Q framing flag. This variable returns 0 if the Layer 2 802.1Q framing parameter is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled.
                             endptL2QAUD 1.3.6.1.4.1.6889.2.69.1.1.29 integer read-only
Audio priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q audio priority value.
                             endptL2QSIG 1.3.6.1.4.1.6889.2.69.1.1.30 integer read-only
Signaling priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q signaling priority value.
                             endptL2QVLAN 1.3.6.1.4.1.6889.2.69.1.1.31 integer read-only
Telephone VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the current Layer 2 802.1Q VLAN Identifier value.
                             endpt46XXUPGR 1.3.6.1.4.1.6889.2.69.1.1.32 displaystring read-only
Upgrade script ID. This variable returns a string of up to 16 ASCII characters specifying the name of the upgrade script retrieved by TFTP after the most recent power-up or reset.
                             endptDNSSRVR 1.3.6.1.4.1.6889.2.69.1.1.33 displaystring read-only
List of DNS server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of DNS servers available for use.
                             endptDNSINUSE 1.3.6.1.4.1.6889.2.69.1.1.34 ipaddress read-only
DNS server address. This variable returns a 4-octet string specifying the IP address of the DNS server currently in use.
                             endptDOMAIN 1.3.6.1.4.1.6889.2.69.1.1.35 displaystring read-only
List of DNS domain labels. This variable returns a sequence of labels, separated by periods, for use as the highest-level domain in resolving DNS names in system values.
                             endptRTCPMON 1.3.6.1.4.1.6889.2.69.1.1.36 ipaddress read-only
RTCP Monitor address. This variable returns a 4-octet string specifying the IP address of the RTCP monitor currently in use.
                             endptPHY2STAT 1.3.6.1.4.1.6889.2.69.1.1.37 integer read-only
Secondary Ethernet interface setting. This variable returns 0 if the endpoint's secondary Ethernet interface is currently NOT enabled (or none exists), 1 if the hub is setfor auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex.
                             endptIRSTAT 1.3.6.1.4.1.6889.2.69.1.1.38 integer read-only
IR Interface flag. This variable returns 0 if the endpoint's IR interface is currently NOT enabled, else 1.
                             endptSMTPSRVR 1.3.6.1.4.1.6889.2.69.1.1.39 displaystring read-only
SMTP server IP addresses. This variable returns a comma-separated list of SMTP server IP addresses available for use, in dotted-decimal or DNS format.
                             endptDSPVERSION 1.3.6.1.4.1.6889.2.69.1.1.40 displaystring read-only
DSP Version. This variable returns a string of up to 10 characters, that identifies the version of the DSP firmware in the endpoint.
                             endptLOGSRVR 1.3.6.1.4.1.6889.2.69.1.1.41 displaystring read-only
Event Log server address. This variable returns at most one IP address, in dotted-decimal or DNS format, of the server to be used for event logging. This function is intended for Avaya use, in debugging if necessary.
                             endptLOGSTAT 1.3.6.1.4.1.6889.2.69.1.1.42 integer read-only
Event Log flag. This variable returns 0 if the endpoint's event logging capability is currently NOT enabled, else 1. This function is intended for Avaya use, in debugging if necessary.
                             endptAGCHAND 1.3.6.1.4.1.6889.2.69.1.1.43 integer read-only
Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability is currently enabled, else 0.
                             endptAGCHEAD 1.3.6.1.4.1.6889.2.69.1.1.44 integer read-only
Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability is currently enabled, else 0.
                             endptPHY1STAT 1.3.6.1.4.1.6889.2.69.1.1.45 integer read-only
Ethernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface is currently NOT enabled, 1 if the Ethernet line interface is currently for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex.
                             endptL2QSTAT 1.3.6.1.4.1.6889.2.69.1.1.46 integer read-only
802.1Q tagging flag. This variable returns 0 if the Layer 2 802.1Q tagging parameter is currently OFF, else 1.
                             endptVLANTEST 1.3.6.1.4.1.6889.2.69.1.1.47 integer read-only
VLAN pause parameter. This variable returns the number of seconds for the endpoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid values are integers from 0 to 999 inclusive.
                             endptPHONECC 1.3.6.1.4.1.6889.2.69.1.1.48 displaystring read-only
Phone comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode of the endpoint itself.
                             endptVLANLIST 1.3.6.1.4.1.6889.2.69.1.1.49 displaystring read-only
VLAN ID list. This variable returns a list of zero or more VLAN IDs.
                             endptAGCSPKR 1.3.6.1.4.1.6889.2.69.1.1.50 integer read-only
Speakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability is currently enabled, else 0.
                             endptHTTPSRVR 1.3.6.1.4.1.6889.2.69.1.1.51 displaystring read-only
HTTP server IP addresses. This variable returns a comma-separated list of HTTP server IP addresses available for use, in dotted-decimal or DNS format.
                             endptHTTPDIR 1.3.6.1.4.1.6889.2.69.1.1.52 displaystring read-only
HTTP server Directory. This variable returns the path used in formation of the URI for HTTP GET operations.
                             endptHTTPPORT 1.3.6.1.4.1.6889.2.69.1.1.53 integer read-only
HTTP TCP port number. This variable returns the TCP port number used by HTTP during initialization.
                             endptHTTPUSED 1.3.6.1.4.1.6889.2.69.1.1.54 octet string read-only
HTTP initialization server IP address. This variable returns a 4-octet IP address for the HTTP server used during initialization (all zeroes if no server successfully used during initialization).
                             endptPROCSTAT 1.3.6.1.4.1.6889.2.69.1.1.55 integer read-only
Local Procedure flag. This variable returns 0 if Local Procedures are currently allowed for this telephone, else 1.
                             endptPROCPSWD 1.3.6.1.4.1.6889.2.69.1.1.56 integer read-only
Local Procedure Password. This variable returns 0 if the Local Procedure Password is null, else 1.
                             endptSIG 1.3.6.1.4.1.6889.2.69.1.1.57 integer read-only
Signaling protocol download flag. This variable returns the integer corresponding to the current signaling protocol.
                             endptGROUP 1.3.6.1.4.1.6889.2.69.1.1.58 integer read-only
Group identifier. This variable returns the integer corresponding to the current group identifier.
                             endptSNMPADD 1.3.6.1.4.1.6889.2.69.1.1.59 displaystring read-only
SNMP source addresses. This variable returns one or more allowable source IP addresses for SNMP queries, in dotted decimal or DNS format.
                             endptCODESRVR 1.3.6.1.4.1.6889.2.69.1.1.60 displaystring read-only
HTTP server addresses. This variable returns zero or more HTTP server addresses for software download, in dotted decimal or DNS format.
                             endptCODEUSED 1.3.6.1.4.1.6889.2.69.1.1.61 octet string read-only
HTTP server address used. This variable returns the HTTP server address from CODESRVR used, if any, during initialization, or all zeroes if no HTTP server was used.
                             endptSTATIC 1.3.6.1.4.1.6889.2.69.1.1.62 integer read-only
Static programming override flag. This variable returns the integer corresponding to the current level of override permissions for static programming.
                             endptTLSSRVR 1.3.6.1.4.1.6889.2.69.1.1.63 displaystring read-only
TLS server addresses. This variable returns zero or more Transport Layer Security server addresses for software download, in dotted decimal or DNS format.
                             endptTLSUSED 1.3.6.1.4.1.6889.2.69.1.1.64 octet string read-only
TLS server address used. This variable returns the TLS server address from TLSSRVR used, if any, during initialization, or all zeroes if no TLS server was used.
                             endptCNAPORT 1.3.6.1.4.1.6889.2.69.1.1.65 integer read-only
Chatter server port. This variable returns the Chatter server registration transport-layer port number (from 0 to 65535; default is 8888).
                             endptCNASRVR 1.3.6.1.4.1.6889.2.69.1.1.66 displaystring read-only
CNA server addresses. This variable returns zero or more Chatter server addresses for network analysis, in dotted decimal or DNS format.
                             endptDSTOFFSET 1.3.6.1.4.1.6889.2.69.1.1.67 displaystring read-only
Daylight Savings Time Offset. This variable returns the offset in local time for Daylight Savings Time. Currently used in SIP phones.
                             endptDSTSTART 1.3.6.1.4.1.6889.2.69.1.1.68 displaystring read-only
Daylight Savings Time Start. This variable returns the first day or date Daylight Savings Time is effective. Currently used in SIP phones.
                             endptDSTSTOP 1.3.6.1.4.1.6889.2.69.1.1.69 displaystring read-only
Daylight Savings Time Stop. This variable returns the first day or date after Daylight Savings Time is over. Currently used in SIP phones.
                             endptGMTOFFSET 1.3.6.1.4.1.6889.2.69.1.1.70 displaystring read-only
Greenwich Mean Time Offset. This variable returns the offset in local time for Greenwich Mean Time. Currently used in SIP phones.
                             endptSNTPSRVR 1.3.6.1.4.1.6889.2.69.1.1.71 displaystring read-only
SNTP server addresses. This variable returns zero or more SNTP server addresses for obtaining time data, in dotted decimal or DNS format. Currently used in SIP phones.
                             endptBAKLIGHTOFF 1.3.6.1.4.1.6889.2.69.1.1.72 integer read-only
Backlight idle timer setting. This variable returns the number of minutes of idle time, after which the telephone backlightis turned off. Range is 0-999, with a default of 120. Used in phones with backlit displays.
                             endptDOT1X 1.3.6.1.4.1.6889.2.69.1.1.73 integer read-only
Current value for 802.1X handling. This variable returns 0 if the telephone supports unicast Supplicant operation only, with PAE multicast pass-through without proxy Logoff, 1 if the same as 0 but with proxy Logoff, and 2 if Unicast both unicast or Multicast Supplicant operation, without PAE multicast pass- through, is supported. The default is 0.
                             endptAUDIOENV 1.3.6.1.4.1.6889.2.69.1.1.74 integer read-only
Audio environment selection index. This variable returns the current setting from the audio environment table (from 0 to 107, default is 0).
                             endptAUDIOSTHD 1.3.6.1.4.1.6889.2.69.1.1.75 integer read-only
Audio headset sidetone setting. This variable returns the current setting (0, 1, or 2; default is 0).
                             endptAUDIOSTHS 1.3.6.1.4.1.6889.2.69.1.1.76 integer read-only
Audio handset sidetone setting. This variable returns the current setting (0, 1, or 2; default is 0).
                             endptDHCPINUSE 1.3.6.1.4.1.6889.2.69.1.1.77 ipaddress read-only
DHCP server address. This variable returns a 4-octet string specifying the IP address of the DHCP server from which the telephone's IP address was obtained (or all zeroes if the telephone was statically addressed).
                             endptDHCPLEASEEXP 1.3.6.1.4.1.6889.2.69.1.1.78 integer32 read-only
Remaining time of IPADD lease. This variable returns an unsigned integer specifying the length of time in seconds until the expiration of the IP address lease, or 0 if the lease has expired.
                             endptDHCPSTD 1.3.6.1.4.1.6889.2.69.1.1.79 integer read-only
DHCP lease violation flag. This variable returns 1 if the telephone is not allowed to use the IP address after its lease has expired, or else 0 if the telephone is allowed to continue operating after the IP address lease has expired.).
                             endptDHCPT1REM 1.3.6.1.4.1.6889.2.69.1.1.80 integer32 read-only
Remaining time until IP address lease renewal. This variable returns an unsigned integer specifying the length of time in seconds until the start of the IP address lease renewal, or 0 if the lease has expired.
                             endptICMPDU 1.3.6.1.4.1.6889.2.69.1.1.81 integer read-only
ICMP Destination support setting. This variable returns 2 if the telephone transmits Destination Unreachable messages with code 2 if the designated transport protocol is not supported AND also if the telephone transmits Destination Unreachable messages with code 3 if a closed UD/TCP port is designated. This variable returns 1 if the telephone only transmits Destination Unreachable messages with code 3 if a closed UD/TCP port is designated. This variable returns 0 if the telephone does not transmit Destination Unreachable messages.
                             endptDHCPT2REM 1.3.6.1.4.1.6889.2.69.1.1.81 integer32 read-only
Remaining time until IP address lease renewal. This variable returns an unsigned integer specifying the length of time in seconds until the start of the IP address lease rebindingl, or 0 if the lease has expired.
                             endptICMPRED 1.3.6.1.4.1.6889.2.69.1.1.82 integer read-only
ICMP Redirect support setting. This variable returns 1 if the telephone supports received Redirect messages as specified in RFC 1122, Sections 3.2.2.2 and 3.3.1.2, or 0 if the telephone does not provide this support.
                             endptSSONCONTENT 1.3.6.1.4.1.6889.2.69.1.1.83 displaystring read-only
Contents of DHCP Site Specific Option Number. This variable returns the data portion of the DHCP SSON as designated by endptNVSSON.
                             endptBRURI 1.3.6.1.4.1.6889.2.69.1.1.84 displaystring read-only
Backup and restore URI. This variable returns a string specifying the URI used for backup and restore files.
                         endptNVM 1.3.6.1.4.1.6889.2.69.1.2
                             endptNVMCIPADD 1.3.6.1.4.1.6889.2.69.1.2.1 displaystring read-only
IP address of call server stored in Non-Volatile Memory (NVM). This variable returns a 4-octet string or DNS string. Default is AvayaCallServer.
                             endptNVMCPORT 1.3.6.1.4.1.6889.2.69.1.2.2 integer read-only
NVM Transport layer port number. This variable returns an integer specifying the call server port number stored in NVM.
                             endptNVIPADD 1.3.6.1.4.1.6889.2.69.1.2.3 displaystring read-only
NVM IP address. This variable returns a 4-octet string specifying the endpoint's IP address stored in NVM.
                             endptNVGIPADD 1.3.6.1.4.1.6889.2.69.1.2.4 displaystring read-only
NVM Router address. This variable returns a 4- octet string specifying the IP address of the router as stored in NVM.
                             endptNVNETMASK 1.3.6.1.4.1.6889.2.69.1.2.5 displaystring read-only
NVM Subnet mask. This variable returns a 4-octet string specifying the subnet mask as stored in NVM.
                             endptNVTFTPSRVR 1.3.6.1.4.1.6889.2.69.1.2.6 displaystring read-only
NVM TFTP server address. This variable returns a 4-octet string specifying the IP address of the file server as stored in NVM. The default is AvayaTFTPserver.
                             endptNVSSON 1.3.6.1.4.1.6889.2.69.1.2.7 integer read-only
NVM Site-specific option number. This variable returns an integer between 128 and 254 inclusive, specifying the SSON stored in NVM. The default is 176.
                             endptNVBBURST 1.3.6.1.4.1.6889.2.69.1.2.8 integer read-only
NVM Blackburst flag. This variable returns 0 if the Blackburst parameter in NVM is OFF, else 1.
                             endptNVHUBSTAT 1.3.6.1.4.1.6889.2.69.1.2.9 integer read-only
NVM Hub flag. This variable has been superseded by endptNVPHY2STAT.
                             endptNVDSCPAUD 1.3.6.1.4.1.6889.2.69.1.2.10 integer read-only
NVM DSCP for audio. This variable specifies the Differentiated Services Code Point for audio stored in NVM (integer between 0 and 63 inclusive).
                             endptNVDSCPSIG 1.3.6.1.4.1.6889.2.69.1.2.11 integer read-only
NVM DSCP for signaling. This variable specifies the Differentiated Services Code Point for signaling stored in NVM (integer between 0 and 63 inclusive).
                             endptNVL2Q 1.3.6.1.4.1.6889.2.69.1.2.12 integer read-only
NVM 802.1Q flag. This variable returns 0 if the Layer 2 802.1Q framing parameter in NVM is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled.
                             endptNVL2QAUD 1.3.6.1.4.1.6889.2.69.1.2.13 integer read-only
NVM Audio priority. This variable returns an integer between 0 and 7 inclusive specifying the Layer 2 802.1Q audio priority value stored in NVM.
                             endptNVL2QSIG 1.3.6.1.4.1.6889.2.69.1.2.14 integer read-only
NVM Signaling priority. This variable returns an integer between 0 and 7 inclusive specifying the Layer 2 802.1Q signaling priority value stored in NVM.
                             endptNVL2QVLAN 1.3.6.1.4.1.6889.2.69.1.2.15 integer read-only
NVM VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the Layer 2 802.1Q VLAN Identifier value stored in NVM.
                             endptNVPHY2STAT 1.3.6.1.4.1.6889.2.69.1.2.16 integer read-only
NVM Secondary Ethernet interface setting. This variable returns 0 if the endpoint's secondary Ethernet interface in NVM is currently NOT enabled(or none exists), 1 if the hub is set for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex.
                             endptNVLOGSTAT 1.3.6.1.4.1.6889.2.69.1.2.17 integer read-only
NVM Event Log flag. This variable returns 0 if the endpoint's event logging capability in NVM is currently NOT enabled, else 1.
                             endptNVAGCHAND 1.3.6.1.4.1.6889.2.69.1.2.18 integer read-only
NVM Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability in NVM is currently enabled, else 0.
                             endptNVAGCHEAD 1.3.6.1.4.1.6889.2.69.1.2.19 integer read-only
NVM Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability in NVM is currently enabled, else 0.
                             endptNVIRSTAT 1.3.6.1.4.1.6889.2.69.1.2.20 integer read-only
NVM IR Interface flag. This variable returns 0 if the endpoint's IR interface capability in NVM is currently NOT enabled, else 1.
                             endptNVPHY1STAT 1.3.6.1.4.1.6889.2.69.1.2.21 integer read-only
NVM Ethernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface in NVM iscurrently NOT enabled, 1 if the Ethernet line interface in NVM is currently for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex.
                             endptNVVLANTEST 1.3.6.1.4.1.6889.2.69.1.2.22 integer read-only
NVM VLAN pause parameter. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid values are integers from 0 to 999 inclusive.
                             endptNVVLANLIST 1.3.6.1.4.1.6889.2.69.1.2.23 displaystring read-only
NVM VLAN ID list. This variable returns a list of zero or more VLAN IDs in NVM.
                             endptNVAGCSPKR 1.3.6.1.4.1.6889.2.69.1.2.24 integer read-only
Speakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability in NVM is currently enabled, else 0.
                             endptNVHTTPSRVR 1.3.6.1.4.1.6889.2.69.1.2.25 displaystring read-only
NVM HTTP server IP addresses. This variable returns a comma-separated list of HTTP server IP addresses available for use as stored in NVM, in dotted-decimal format.
                             endptNVAUTH 1.3.6.1.4.1.6889.2.69.1.2.26 integer read-only
Script file authentication flag. This variable returns 1 if the endpoint must authenticate script files, else 0.
                             endptNVFILESRVR 1.3.6.1.4.1.6889.2.69.1.2.27 displaystring read-only
NVM File server address. This variable returns a 4-octet string specifying the IP address of the file server as stored in NVM.
                             endptNVALERT 1.3.6.1.4.1.6889.2.69.1.2.28 integer read-only
Alerting Mode flag. This variable returns 1 if the alerting mode setting in non-volatile memory is enabled, else 0.
                             endptNVCHADDR 1.3.6.1.4.1.6889.2.69.1.2.29 integer32 read-only
Manually-entered DHCP chaddr value. This variable returns a manually-entered value for the DHCP chaddr field as stored in non-volatile memory, if any. A Hexadecimal value with range of 0 (the default) to 999999.
                             endptNVCONTRAST 1.3.6.1.4.1.6889.2.69.1.2.30 integer read-only
Display Contrast setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-15, with 8 the default.
                         endptMaintenance 1.3.6.1.4.1.6889.2.69.1.3
                             endptUPGRADESCRIPT 1.3.6.1.4.1.6889.2.69.1.3.1 integer read-only
Script loading status flag. This variable returns '0' if the upgrade script (endpt46XXUPGR) was successfully obtained and interpreted since the last power-up or reset. This variable returns '1' if the upgrade script was successfully obtained and but NOT successfully interpreted since the last power-up or reset. This variable returns '2' if the upgrade script was NOT successfully obtained since the last power-up or reset.
                             endptAPPINUSE 1.3.6.1.4.1.6889.2.69.1.3.2 displaystring read-only
Application file name. This variable returns the name of the application file in the endpoint.
                             endptAPPSTAT 1.3.6.1.4.1.6889.2.69.1.3.3 integer read-only
Application download flag. This variable returns '0' if the most recent attempt to download and store an application file was successful. This variable returns '1' if the most recent attempt to download an application file was successful but the file was not successfully stored in NVM. This variable returns '2' if the most recent attempt to download an application file was NOT successful.
                             endptRecentLog 1.3.6.1.4.1.6889.2.69.1.3.4 no-access
Each entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first.
                                 endptRecentLogEntry 1.3.6.1.4.1.6889.2.69.1.3.4.1 no-access
Each entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first.
                                     endptRecentLogText 1.3.6.1.4.1.6889.2.69.1.3.4.1.1 displaystring read-only
Syslog event message.
                             endptResetLog 1.3.6.1.4.1.6889.2.69.1.3.5 no-access
Each entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first.
                                 endptResetLogEntry 1.3.6.1.4.1.6889.2.69.1.3.5.1 no-access
Each entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first.
                                     endptResetLogText 1.3.6.1.4.1.6889.2.69.1.3.5.1.1 displaystring read-only
Syslog event message.
                         endptDEFINITY 1.3.6.1.4.1.6889.2.69.1.4
                             endptPORTAUD 1.3.6.1.4.1.6889.2.69.1.4.1 integer read-only
Transport-layer audio port. This variable returns the endpoint's transport layer port number for audio, currently in use.
                             endptPORTSIG 1.3.6.1.4.1.6889.2.69.1.4.2 integer read-only
Transport-layer signaling port. This variable returns the endpoint's transport layer port number for signaling, currently in use.
                             endptFEIPADD 1.3.6.1.4.1.6889.2.69.1.4.3 octet string read-only
Audio endpoint address. This variable returns a 4-octet string specifying the address of the far-end audio endpoint currently in use.
                             endptFEPORT 1.3.6.1.4.1.6889.2.69.1.4.4 integer read-only
Audio endpoint port number. This variable returns the far-end endpoint's transport layer port number for audio, currently in use.
                             endptCODECR 1.3.6.1.4.1.6889.2.69.1.4.5 displaystring read-only
Receive codec. This variable returns the designation of the Receive codec currently in use.
                             endptCODECT 1.3.6.1.4.1.6889.2.69.1.4.6 displaystring read-only
Transmit codec. This variable returns the designation of the Transmit codec currently in use.
                             endptJCPC 1.3.6.1.4.1.6889.2.69.1.4.7 integer read-only
Jitter compensation packet count. This variable returns the Jitter compensation packet count currently in use (between 0 and 20, inclusive).
                             endptTMSEC 1.3.6.1.4.1.6889.2.69.1.4.8 integer read-only
Transmit buffer fill level. This variable returns the transmit buffer minimum fill level, in msec, currently in use.
                             endptNVPHONEXT 1.3.6.1.4.1.6889.2.69.1.4.9 displaystring read-only
Endpoint's phone extension. This variable returns a text string identifying the endpoint's extension, in free text format. The default value is NULL.
                             endptL2QBBE 1.3.6.1.4.1.6889.2.69.1.4.10 integer read-only
802.1Q BBE priority value. This variable returns an integer between 0 and 7 inclusive specifying the far-end endpoint's Layer 2 Better than Best Effort audio priority value.
                             endptDSCPBBE 1.3.6.1.4.1.6889.2.69.1.4.11 integer read-only
DSCP BBE priority value. This variable returns an integer between 0 and 7 inclusive specifying the far-end endpoint's DiffServ Better than Best Effort audio priority value.
                             endptRTCPCONT 1.3.6.1.4.1.6889.2.69.1.4.12 integer read-only
RTCP Control flag. This variable returns 0 if the RTCP control status is off/disabled, else 1.
                             endptRTCPFLOW 1.3.6.1.4.1.6889.2.69.1.4.13 integer read-only
RTCP Flowrate. This variable returns an integer between 0 and 65335 inclusive specifying the RTCP flowrate in milliseconds.
                             endptRSVPCONT 1.3.6.1.4.1.6889.2.69.1.4.14 integer read-only
RSVP Control flag. This variable returns 0 if the RSVP control status is off/disabled, else 1.
                             endptRSVPRFRSH 1.3.6.1.4.1.6889.2.69.1.4.15 integer read-only
RSVP Refresh rate. This variable returns an integer between 0 and 65335 inclusive specifying the RSVP refresh rate in milliseconds.
                             endptRSVPRTRY 1.3.6.1.4.1.6889.2.69.1.4.16 integer read-only
RSVP Failed Retry flag. This variable returns 0 if the RSVP Failed Retry Reservation control status is off/disabled, else 1.
                             endptRSVPPROF 1.3.6.1.4.1.6889.2.69.1.4.17 integer read-only
RSVP profile flag. This variable returns 0 if the RSVP profile is guaranteed, else 1 for controlled load.
                             endptPHNCC 1.3.6.1.4.1.6889.2.69.1.4.18 integer read-only
Telephone country code. This variable returns 1-3 digits; the administered international country code for the location of the serving call server.
                             endptPHNDPLENGTH 1.3.6.1.4.1.6889.2.69.1.4.19 integer read-only
Telephone dial plan length. This variable returns 1 or 2 digits (3-10); the length of the administered dial plan for the serving call server.
                             endptPHNIC 1.3.6.1.4.1.6889.2.69.1.4.20 integer read-only
Telephone international access code. This variable returns 1-4 digits; the digits dialed to access public network international trunks from the serving call server.
                             endptPHNLD 1.3.6.1.4.1.6889.2.69.1.4.21 integer read-only
Telephone long distance access code. This variable returns 1 digit or Null; the digit dialed to access public network long distance trunks from the serving call server.
                             endptPHNLDLENGTH 1.3.6.1.4.1.6889.2.69.1.4.22 integer read-only
Length of national telephone number. This variable returns 1 or 2 digits (5-15); the number of digits in the longest possible national telephone number for the location of the serving call server.
                             endptPHNOL 1.3.6.1.4.1.6889.2.69.1.4.23 integer read-only
Outside line access code. This variable returns 1 or 2 digits or Null; the digit(s) dialed to access public network local trunks from the serving call server.
                             endptNTWKAUDIO 1.3.6.1.4.1.6889.2.69.1.4.24 integer read-only
Network audio quality display flag. This variable returns 0 if the Network audio quality display status is off/disabled, else 1. This flag does not apply to the 4610, 4620, or 4630 IP Telephones.
                             endptENHDIALSTAT 1.3.6.1.4.1.6889.2.69.1.4.25 integer read-only
Enhanced Local Dialing status. This variable returns 0 if the Enhanced Local Dialing status is off/disabled, else 1.
                             endptRESTORESTAT 1.3.6.1.4.1.6889.2.69.1.4.26 integer read-only
FTP Backup/restore status. This variable returns 0 if the automatic FTP backup and restore feature status is off/disabled, else 1.
                             endptFTPUSERSTAT 1.3.6.1.4.1.6889.2.69.1.4.27 integer read-only
FTP User permissions status. This variable returns 0 if the user may not change previously-administered FTP server and Directory data, 1 if the user may change or create both FTP server and Directory data, and 2 if the user may only change or create FTP Directory data.
                             endptRASGkList 1.3.6.1.4.1.6889.2.69.1.4.28 no-access
Each entry is one of up to 30 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the order received.
                                   endptRASGkEntry 1.3.6.1.4.1.6889.2.69.1.4.28.1 no-access
Each entry is one of up to 30 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the order received.
                                       endptRASGkEntryData 1.3.6.1.4.1.6889.2.69.1.4.28.1.1 displaystring read-only
Data for an individual RAS-provided Gatekeeper.
                         endptAdvApps 1.3.6.1.4.1.6889.2.69.1.5
                             endptCIBURL 1.3.6.1.4.1.6889.2.69.1.5.1 displaystring read-only
Documentation URL. This variable returns a URL of the directory in which the web-based Customer Information Booklet web pages are located.
                             endptDIRSRVR 1.3.6.1.4.1.6889.2.69.1.5.2 octet string read-only
LDAP Server address. This variable returns a the IP address of the LDAP server to be used for the phone's Directoryapplication, in dotted decimal or DNS format.
                             endptDIRTOPDN 1.3.6.1.4.1.6889.2.69.1.5.3 displaystring read-only
Directory Top Name. This variable returns a string specifying the Topmost Distinguished Name in the LDAP Directory to be used for the 4630's Directory application.
                             endptDIRFULLNAME 1.3.6.1.4.1.6889.2.69.1.5.4 displaystring read-only
Directory FullName Label. This variable returns a string specifying the LDAP Directory's Full Name Field Label, to be used for the 4630's Directory application.
                             endptDIRTELNUM 1.3.6.1.4.1.6889.2.69.1.5.5 displaystring read-only
Directory Phone Number Label. This variable returns a string specifying the LDAP Directory's Telephone Number Field Label, to be used for the 4630's Directory application.
                             endptDIRSRCHTIME 1.3.6.1.4.1.6889.2.69.1.5.6 integer read-only
Directory Search Duration. This variable returns an integer specifying the maximum number of seconds the LDAP Directory should be searched before reporting completion or failure of the search.
                             endptDIRSRVRPWD 1.3.6.1.4.1.6889.2.69.1.5.7 displaystring read-only
Directory Access Password. This variable returns a string specifying the password used for accessing the LDAP Directory. The null string is returned if no password has been specified.
                             endptDIRUSERID 1.3.6.1.4.1.6889.2.69.1.5.8 displaystring read-only
Directory Access User ID. This variable returns a string specifying the User identity used for accessing the LDAP Directory. The null strong is returned if no user ID has been specified.
                             endptDIRCODING 1.3.6.1.4.1.6889.2.69.1.5.9 displaystring read-only
Directory Coding Scheme. This variable returns a string specifying the character coding scheme (e.g. ASCII or Latin-1) to be used for LDAP Directory queries.
                             endptDIRSTAT 1.3.6.1.4.1.6889.2.69.1.5.10 integer read-only
Directory Connection Status. This variable returns an integer specifying the result code for the most recent Bind Request sent by the 4630 to the LDAP server.
                             endptFTPSRVR 1.3.6.1.4.1.6889.2.69.1.5.11 octet string read-only
FTP Server address. This variable returns the IP address of the FTP server to be used for the phone's file storage and retrieval, in dotted decimal or DNS format.
                             endptFTPDIR 1.3.6.1.4.1.6889.2.69.1.5.12 displaystring read-only
FTP Server directory. This variable returns a path name of the directory on the FTP server to be used for the phone's file storage and retrieval.
                             endptPHNEMERGNUM 1.3.6.1.4.1.6889.2.69.1.5.13 displaystring read-only
Emergency number. This variable returns a string specifying the emergency number to be outpulsed when the user presses the optional Emergency button in the 4630 Speed Dial application.
                             endptPHNNUMOFCA 1.3.6.1.4.1.6889.2.69.1.5.14 integer read-only
Number of Call Appearances. This variable returns the number of Call Appearances downloaded from the DEFINITY during registration to the 4630, 462x and 4610SW.
                             endptPHNNUMOFFB 1.3.6.1.4.1.6889.2.69.1.5.15 integer read-only
Number of Feature Buttons. This variable returns the number of administered Feature Buttons downloaded from the switch during registration to the 4630, 462x and 4610SW.
                             endptWEBCODING 1.3.6.1.4.1.6889.2.69.1.5.16 displaystring read-only
Web Coding Scheme. This variable returns a string specifying the character coding scheme (e.g. ASCII or Latin-1) to be used for characters entered on forms on web pages. Used by the 4630 Web application.
                             endptWEBEXCEPT 1.3.6.1.4.1.6889.2.69.1.5.17 displaystring read-only
Web Proxy Server Exception List. This variable returns a string specifying a list of one or more HTTP proxy server Exception domains, separated by commas with no intervening spaces, up to 127 total characters. Used by the 4630 Web application.
                             endptWEBHOME 1.3.6.1.4.1.6889.2.69.1.5.18 displaystring read-only
Web application URL. This variable returns a URL of the Home page for the 4630 Web application.
                             endptWEBPORT 1.3.6.1.4.1.6889.2.69.1.5.19 integer read-only
Web application TCP port. This variable returns an integer specifying the TCP port most recently used for the HTTP proxy server. Used by the 4630 Web application.
                             endptWEBPROXY 1.3.6.1.4.1.6889.2.69.1.5.20 octet string read-only
Web Proxy Server. This variable returns an IP addresses, in dotted-decimal or DNS format, of an HTTP proxy server. Used by the 4630 Web application.
                             endptDIRLDAPPORT 1.3.6.1.4.1.6889.2.69.1.5.21 integer read-only
LDAP Directory Port. This variable returns the port number for LDAP messages, and has a default value of 389.
                             endptVMLCODING 1.3.6.1.4.1.6889.2.69.1.5.22 displaystring read-only
Voice Mail Coding Scheme. This variable returns a string specifying the character coding scheme (e.g. ASCII or Latin-1) to be used for characters entered on forms on the 4630 Voice Mail application.
                             endptVMLHOME 1.3.6.1.4.1.6889.2.69.1.5.23 displaystring read-only
Voice Mail application URL. This variable returns a URL of the Home page for the 4630 Voice Mail application.
                             endptCLACTIVE 1.3.6.1.4.1.6889.2.69.1.5.24 integer read-only
Call Log activation flag. This variable returns 0 if the call log status is off/disabled, else 1.
                             endptWMLCODING 1.3.6.1.4.1.6889.2.69.1.5.25 displaystring read-only
4610SW/2x Web Coding Scheme. This variable returns a string specifying the character coding scheme (e.g. ASCII or Latin-1) to be used for characters entered on forms on web pages. Used by the 4610SW/462x Web application.
                             endptWMLEXCEPT 1.3.6.1.4.1.6889.2.69.1.5.26 displaystring read-only
4610SW/2x Web Proxy Server Exception List. This variable returns a string specifying a list of one or more HTTP proxy server Exception domains, separated by commas with no intervening spaces, up to 127 total characters. Used by the 4610SW/462x Web application.
                             endptWMLHOME 1.3.6.1.4.1.6889.2.69.1.5.27 displaystring read-only
4610SW/2x Web application URL. This variable returns a URL of the Home page for the 4610SW/462x Web application.
                             endptWMLPORT 1.3.6.1.4.1.6889.2.69.1.5.28 integer read-only
4610SW/2x Web application TCP port. This variable returns an integer specifying the TCP port most recently used for the HTTP proxy server. Used by the 4610SW/462x Web application.
                             endptWMLPROXY 1.3.6.1.4.1.6889.2.69.1.5.29 octet string read-only
4610SW/2x Web Proxy Server. This variable returns an IP addresses, in dotted-decimal or DNS format, of an HTTP proxy server. Used by the 4610SW/2x Web application.
                             endptCTISTAT 1.3.6.1.4.1.6889.2.69.1.5.30 integer read-only
CTI flag. This variable returns 0 if the CTI application is set to off, else 1.
                             endptCTIUDPPORT 1.3.6.1.4.1.6889.2.69.1.5.31 integer read-only
CTI application UDP port. This variable returns an integer specifying the UDP port most recently used for the UDP listener to receive broadcast messages.
                             endptSTKSTAT 1.3.6.1.4.1.6889.2.69.1.5.32 integer read-only
Stock Ticker flag. This variable returns 0 if the 4630 Stock Ticker application is set to off, else 1.
                             endptSUBSCRIBELIST 1.3.6.1.4.1.6889.2.69.1.5.33 displaystring read-only
4610SW/2x Web push subscription list. This variable returns a string containing one or more fully qualified URLs to which the phone's Web application subscribes for potential pushed content.
                             endptTPSLIST 1.3.6.1.4.1.6889.2.69.1.5.34 displaystring read-only
4610SW/2x Web Trusted Push Server list. This variable returns a string containing one or more domains and paths in DNS format, used to determine for validation of push requests.
                             endptWMLIDLETIME 1.3.6.1.4.1.6889.2.69.1.5.35 integer read-only
Web Idle Timer. This variable returns the number of minutes, from 1 to 60 inclusive, of idle activity on the telephone before the Web Idle Timer URI is displayed.
                             endptWMLIDLEURI 1.3.6.1.4.1.6889.2.69.1.5.36 displaystring read-only
Web Idle Timer URI. This variable returns the URI of the WML page displayed after the 4610SW/462x Web Idle Timer expires.
                         endptAdjuncts 1.3.6.1.4.1.6889.2.69.1.6
                             endptFKEU 1.3.6.1.4.1.6889.2.69.1.6.1 integer read-only
FKEU flag. This variable returns 0 if the Feature Key Expansion Unit is off, disabled, or not present, else 1.
                             endptFKEUHEALTH 1.3.6.1.4.1.6889.2.69.1.6.2 integer read-only
FKEU flag. This variable returns 1 if the most recent self-test of the Feature Key Expansion Unit or the 4620 failed, else 0.
                         endptSIP 1.3.6.1.4.1.6889.2.69.1.7
                             endptCALLFWDSTAT 1.3.6.1.4.1.6889.2.69.1.7.1 integer read-only
Call Forwarding setting. This variable returns the sum of all Call Forwarding permissions. Range is 0 to 7, with 0 as the default.
                             endptCOVERAGEADDR 1.3.6.1.4.1.6889.2.69.1.7.2 displaystring read-only
Call Coverage Server address. This variable returns the URI to which call coverage is sent; up to 255 characters.
                             endptDATETIMEFORMAT 1.3.6.1.4.1.6889.2.69.1.7.3 integer read-only
Date and Time format specification. This variable returns a parameter indicating the desired format for display of date and time. Range is 0 to 3, with 0 as the default.
                             endptMUSICSRVR 1.3.6.1.4.1.6889.2.69.1.7.4 displaystring read-only
List of music server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of music servers available for use.
                             endptMUSICSRVRINUSE 1.3.6.1.4.1.6889.2.69.1.7.5 ipaddress read-only
Music server address. This variable returns a 4-octet string specifying the IP address of the music server most recently used.
                             endptMWISRVR 1.3.6.1.4.1.6889.2.69.1.7.6 displaystring read-only
List of message waiting indicator server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of message waiting indicator servers available for use.
                             endptMWISRVRINUSE 1.3.6.1.4.1.6889.2.69.1.7.7 ipaddress read-only
Message waiting indicator server address. This variable returns a 4-octet string specifying the IP address of the message waiting indicator server most recently used.
                             endptREGISTERWAIT 1.3.6.1.4.1.6889.2.69.1.7.8 integer read-only
Registration wait interval. This variable returns the number of seconds between attempts to re-register with the current server. Range is 0 to 65535, with 3600 as the default.
                             endptSIPPROXYSRVR 1.3.6.1.4.1.6889.2.69.1.7.9 displaystring read-only
List of SIP Proxy server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of SIP Proxy servers available for use.
                             endptSIPPROXYSRVRINUSE 1.3.6.1.4.1.6889.2.69.1.7.10 ipaddress read-only
SIP Proxy server address. This variable returns a 4-octet string specifying the IP address of the SIP Proxy server most recently used.
                             endptSIPREGISTRAR 1.3.6.1.4.1.6889.2.69.1.7.11 displaystring read-only
List of SIP registrar addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of SIP registrars available for use.
                             endptSIPREGISTRARINUSE 1.3.6.1.4.1.6889.2.69.1.7.12 ipaddress read-only
SIP registrar address. This variable returns a 4-octet string specifying the IP address of the SIP registrar most recently used.
                             endptSPEAKERSTAT 1.3.6.1.4.1.6889.2.69.1.7.13 integer read-only
Speaker setting. This variable returns a parameter indicating the allowed level of speakerphone functionality. Range is 0 to 2, with 2 as the default.
                             endptSIPPORT 1.3.6.1.4.1.6889.2.69.1.7.14 integer read-only
TCP/UDP port used for SIP messages. This variable returns the current port number used for SIP messaging. The default is 5060.
                             endptSIPDOMAIN 1.3.6.1.4.1.6889.2.69.1.7.15 displaystring read-only
SIP registration domain name. This text is used in the Contact header field as part of SIP registration.
                             endptPHNNUMOFSA 1.3.6.1.4.1.6889.2.69.1.7.16 integer read-only
Number of Session Appearances. This variable returns the number of Session Appearances administered for the SIP phone.
                             endptDIALWAIT 1.3.6.1.4.1.6889.2.69.1.7.17 integer read-only
Dialing timeout interval. This variable returns the number of seconds after the user stops dialing, that the telephone waits before automatically dialing the number enterered so far. The range is 0 to 10, and zero seconds means the telephone will wait forever, or until the user presses Send.
                             endptDIALPLAN 1.3.6.1.4.1.6889.2.69.1.7.18 displaystring read-only
SIP dial plan. This variable returns the administered dial plan, used during manual dialing to allow a call to be initiated without the use of a Send button and without waiting for the expiration of a timeout interval; up to 1000 characters.
                             endptCALLFWDADDR 1.3.6.1.4.1.6889.2.69.1.7.19 displaystring read-only
Call Forwarding address. This variable returns the URI to which calls are forwarded; up to 255 characters.
                             endptCALLFWDDELAY 1.3.6.1.4.1.6889.2.69.1.7.20 integer read-only
Call Forwarding delay. This variable returns the number of times the telephone will ring before a call is forwarded, if Call Forwarding on No Answer is selected.