AWC-VLAN-CFG-MIB: View SNMP OID List / Download MIB

VENDOR: TELESYSTEMS SLW INC.


 Home MIB: AWC-VLAN-CFG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, AWCVX-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 awcVlanCfgMIB 1.3.6.1.4.1.522.3.21
Aironet products VLAN Configuration MIB.
       awcVlanCfgObjects 1.3.6.1.4.1.522.3.21.1
           awcMaxVlanIds 1.3.6.1.4.1.522.3.21.1.1 unsigned32 read-only
The Maximum number of discrete VLAN IDs supported. The VLAN IDs need not be consecutive.
           awcVlanEncapMode 1.3.6.1.4.1.522.3.21.1.2 awcvlanencaptype read-only
The encapsulation mode setting controls transmit tagging logic for all ports. The value of this object is derived from other settings within the VLAN MIB.
           awcNativeVlanId 1.3.6.1.4.1.522.3.21.1.3 awcvlanid read-write
Native VLAN ID for the device. The default Native VLAN ID is 0, for no VLAN ID. If the device is attached to an Ethernet bridge/switch VLAN port then a non-zero Native VLAN ID must match the Port VLAN ID of the bridge/switch port. The Native VLAN ID is the default VLAN ID for frames that are not otherwise associated with a VLAN ID.
           awcVlanAllowEncrypted 1.3.6.1.4.1.522.3.21.1.4 truthvalue read-write
When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as no other VLAN parameters necessitate use of encryption. The default value of this attribute shall be true. The general use for awcVlanAllowEncrypted to be true even when no static WEP keys are set for a VLAN is to allow a station to utilize EAP authentication to encrypt directed packets, even while multicast packets are unencrypted.
           awcVlanAnyEnabled 1.3.6.1.4.1.522.3.21.1.5 truthvalue read-write
When this attribute is true, VLAN operation of the system is enabled when any awcVlanEnabled value is true. When this attribute is false, VLAN operation is disabled. The awcVlanAnyEnabled thus acts as a master switch to enable or disable VLAN operation.
           awcVlanCfgTable 1.3.6.1.4.1.522.3.21.1.6 no-access
A table used for configuring and managing VLANS.
               awcVlanCfgEntry 1.3.6.1.4.1.522.3.21.1.6.1 no-access
VLAN table entry containing parameters for configuring and managing a particular VLAN.
                   awcVlanIndex 1.3.6.1.4.1.522.3.21.1.6.1.1 awcvlanindex no-access
VLAN ID to which the parameters in this conceptual row shall be applied. If 4095, the parameters in this conceptual row shall be applied to non-VLAN-tagged frames.
                   awcVlanPolId 1.3.6.1.4.1.522.3.21.1.6.1.2 awcpolid read-only
Default Policy Group Identifier for hosts occupying this VLAN.
                   awcVlanEnabled 1.3.6.1.4.1.522.3.21.1.6.1.3 truthvalue read-only
If true, this VLAN is enabled on all trunk and hybrid ports. If false, this VLAN is disabled on all ports.
                   awcVlanNUcastKeyRotationInterval 1.3.6.1.4.1.522.3.21.1.6.1.4 integer read-only
WEP key rotation period. 0 indicates no key rotation.
                   awcVlanRowStatus 1.3.6.1.4.1.522.3.21.1.6.1.5 rowstatus read-only
Used for creating/deleting conceptual rows in this table.
                   awcVlanMicAlgorithm 1.3.6.1.4.1.522.3.21.1.6.1.6 awcdot11micalgorithm read-only
Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations assigned to this VLAN. This object is not applicable for the reserved VLAN 4095.
                   awcVlanWEPKeyPermuteAlgorithm 1.3.6.1.4.1.522.3.21.1.6.1.7 awcdot11wepkeypermutealgorithm read-only
Function through which the WEP encryption key is permuted between key renewal periods for stations assigned to this VLAN. This object is not applicable for the reserved VLAN 4095.
                   awcVlanName 1.3.6.1.4.1.522.3.21.1.6.1.8 octet string read-only
Descriptive textual name for the VLAN.
                   awcVlanDefaultUserPriority 1.3.6.1.4.1.522.3.21.1.6.1.9 awcpfpriority read-only
Designation of the priority assigned to packets transmitted over this VLAN, if no other filter or classification rule has yet assigned a priority.
                   awcVlanAlert 1.3.6.1.4.1.522.3.21.1.6.1.10 truthvalue read-only
Should an alert be registered when a packet on this VLAN is observed?
           awcVlanNUcastKeyTable 1.3.6.1.4.1.522.3.21.1.7 no-access
Default Shared WEP Keys for all 802.11 packets transmitted and received as non-VLAN-tagged frames over a port with the Port VLAN ID specified as awcVlanIndex. If WEP encryption is enabled for transmitted 802.11 frames, then the set of 1 to 4 default shared WEP keys are used to encrypt transmitted 802.11 broadcast/multicast frames associated with the Port VLAN ID. The shared WEP keys are also used to encrypt/decrypt unicast frames, associated with the Port VLAN ID, if an individual session key is not defined for the target station address.
               awcVlanNUcastKeyEntry 1.3.6.1.4.1.522.3.21.1.7.1 no-access
An entry in the awcVlanNUcastKeyTable table.
                   awcVlanNUcastKeyIndex 1.3.6.1.4.1.522.3.21.1.7.1.1 integer no-access
802.11 WEP Key Index, + 1, used when transmitting or receiving frames with this key.
                   awcVlanNUcastKeyLen 1.3.6.1.4.1.522.3.21.1.7.1.2 integer read-write
Length in octets of awcVlanNUcastKeyValue. Common values are 5 for 40-bit WEP and 13 for 128-bit WEP. A value of 0 means that the key is not set.
                   awcVlanNUcastKeyValue 1.3.6.1.4.1.522.3.21.1.7.1.3 wepkeytype128 read-write
A WEP default secret key value. The value is write-only (attempt to read will result in return of zero-length string).
           awcVlanAllowUnencryptedVlanId 1.3.6.1.4.1.522.3.21.1.8 awcvlanid read-write
Single VLAN ID on which unencrypted packets are allowed. The default Unencrypted VLAN ID is 0, meaning that all VLANs require full encryption.
       awcVlanCfgNotifications 1.3.6.1.4.1.522.3.21.2
       awcVlanCfgConformance 1.3.6.1.4.1.522.3.21.3
           awcVlanCfgCompliances 1.3.6.1.4.1.522.3.21.3.1
               awcVlanCfgCompliance 1.3.6.1.4.1.522.3.21.3.1.1
The compliance statement for the awcVlanCfgMIB group.
           awcVlanCfgGroups 1.3.6.1.4.1.522.3.21.3.2
               awcVlanCfgObjectsGroup 1.3.6.1.4.1.522.3.21.3.2.1