AVAYA-SURV-MIB: View SNMP OID List / Download MIB

R4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib | + .0 avSurvNotification | + .1 avSurvConfig | + .2 avSurvStationTable | (index: avSurvStationIndex) | + .3 avSurvTrunkGroupTable | (index: avSurvTrunkGroupNum) | + .4 avSurvTrunkTable | (indexes: avSurvTrunkRefNumber, | avSurvTrunkIndex) | + .5 avSurvArsTable | (index: avSurvDialIndex) | + .6 avSurvFacTable | (index: avSurvFacIndex) | + .7 avSurvIpVoiceCodecSetTable | (indexes: avSurvIpVoiceCodecSetNum,) | avSurvIpVoiceCodecSetIndex) | + .8 avSurvIpCodecSetConfig | | + .9 avSurvSlotConfigTable | (index: avSurvSlotConfigIndex) | + .10 avSurvDs1Table | (index: avSurvDs1Index) | + .11 avSurvSigGroupTable | (index: avSurvSigGroupIndex) | + .12 avSurvBriTable | (index: avSurvBriIndex) | + .13 avSurvIncomingRoutingTable | (indexes: avSurvIncomingRoutingGroupRefNumber, | avSurvIncomingRoutingIndex) | + .14 avSurvNfasTable | (indexes: avSurvNfasSigGroupRefNumber, | avSurvNfasIndex) | + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. | Change avSurvBriIndex to be 1..64 instead of 1..24.

This trap indicates that survivability.o has been administratively enabled.

This trap indicates that survivability.o has been administratively disabled.

This trap indicates that survivability.o is now the call controller of record and is processing calls.

This trap indicates that survivability.o has stopped processing calls. A more powerful controller may have taken over, either an LSP or a primary call controller.

Allows craft or PIM to enable the SLS call engine or read its current state Enumeration: 'disabled': 2, 'enabled': 1.

Current operational status of SLS call engine Enumeration: 'active': 1, 'inactive': 2.

Maximum IP phone registrations allowed. Gateway SLS firmware will restrict per model. G250 R3.0 = 10; G250 R3.1 and R4.0 = 12; G350 R4.0 = 72; IG550 [Juniper gateways(4350, 6350) R4.0 = 100; IG550 [Juniper gateways(2320, 2350) R4.1 = 100; G450 R4.1 =240 G430 = 150

Date Format. This is used for calendar/clock display on DCP & IP phones Enumeration: 'mmDdYy': 1, 'yyMmDd': 3, 'ddMmYy': 2.

Date/Timestamp of last download from PIM. This is written by PIM after it completes initialization of all configuration parameters

Severity of last sent trap Enumeration: 'major': 4, 'indeterminate': 2, 'warning': 6, 'critical': 3, 'cleared': 1, 'minor': 5.

Clear Running Configuration Command, write only Enumeration: 'clear': 1.

Gateway Identification Number (see CM Media Gateway form)

Allows Craft to prevent PIM updates from being downloaded during local diagnostic session Enumeration: 'disabled': 2, 'enabled': 1.

Allows a station in the branch office to be able to directly dial an attendant position

Specifies the station which shall serve as the branch office attendant position. Used as destination to direct un-routable incoming trunk calls.

Station Table

Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name

Station Table Index

Station Extension number

Station model type Enumeration: 'dcp8405Dplus': 44, 'ip4612': 6, 'dcp6402D': 31, 'dcp2410': 21, 'dcp6408': 32, 'dcp8405Bplus': 42, 'dcp8411D': 48, 'ip4620Sw': 8, 'dcp6402': 30, 'dcp6408plus': 33, 'ip4606': 4, 'ip4602': 2, 'ip4601': 1, 'dcp8411B': 47, 'dcp6416Dplus': 36, 'ip4625': 13, 'ip4624': 9, 'ip4621': 11, 'ip4620': 7, 'ip4622': 12, 'dcp6408Dplus': 35, 'ip4610Sw': 5, 'dcp2402': 20, 'analog2500': 10, 'dcp6424Dplus': 37, 'dcp2420': 22, 'dcp8405D': 43, 'ip4602Sw': 3, 'dcp8405B': 41, 'dcp8403B': 40, 'dcp8410B': 45, 'dcp8410D': 46, 'dcp8434D': 49, 'dcp6408D': 34.

Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvStationSlotPort to communicate slot-port info.

Station Class of Outgoing Restriction (COR) level Enumeration: 'unrestricted': 5, 'internal': 2, 'local': 3, 'emergency': 1, 'toll': 4.

Station trunk destination. Can be used to answer incomming trunk calls

Create/Delete a row entry

Station set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP phone models 6416 and 6424 may use modesl 801A and XM24.

CM slot/port in the Vyxx format

Switchhook flash is allowed only for analog phones

IP address of registered IP station. Note only for IP stations

Station or user's Name

Trunk Group Table

Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode

Trunk Group Number

Trunk Group Type Enumeration: 't1IsdnSignaling': 6, 'e1InBandSignaling': 7, 'analogGroundStart': 3, 'analogLoopStart': 1, 'e1IsdnSignaling': 8, 'bri': 4, 'analogDid': 2, 't1InBandSignaling': 5.

Trunk Group Trunk Access Code (TAC)

Trunk Group Outward Dial. Note MF not supported in SLS Enumeration: 'mf': 3, 'rotary': 1, 'dtmf': 2.

Create/Delete a row entry

Trunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action. Enumeration: 'insert2': 12, 'insert3': 13, 'insert1': 11, 'insert4': 14, 'blank': 99, 'absorb2': 2, 'absorb3': 3, 'absorb1': 1, 'absorb4': 4, 'absorb5': 5.

Digit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks.

Type of incoming supervision used on DID trunk. This applies only for analog DID trunks. Enumeration: 'wink': 2, 'immediate': 1.

Customer's name for trunk group

Which Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks. Enumeration: 'codeset0': 0, 'codeset7': 7, 'codeset6': 6.

Which codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks. Enumeration: 'codeset7': 7, 'codeset6': 6.

Used for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks. Enumeration: 'exclusive': 1, 'preferred': 2.

Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks. Enumeration: 'overlapEnbloc': 2, 'enblocOverlap': 1, 'enblocEnbloc': 0, 'overlapOverlap': 3.

Send a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan. Enumeration: 'yes': 1, 'no': 2.

Specifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no. Enumeration: 'restricted': 3, 'yes': 1, 'no': 2.

Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no. Enumeration: 'restricted': 3, 'yes': 1, 'no': 2.

Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown. Enumeration: 'unknown': 1, 'public': 2, 'private': 3, 'unknownPrivate': 4.

Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls

Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure Enumeration: 'yes': 1, 'no': 2.

Determines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0 Enumeration: 'set4': 4, 'set5': 5, 'set6': 6, 'set7': 7, 'set1': 1, 'set2': 2, 'set3': 3, 'set8': 8.

Determines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks. Enumeration: 'cyclical': 2, 'ascend': 1, 'descend': 3.

Applies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks. Enumeration: 'loopStart': 3, 'autoAuto': 9, 'immediateImmediate': 8, 'winkAuto': 7, 'winkWink': 5, 'winkImmediate': 6, 'groundStart': 4, 'autoWink': 10.

Applies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE. Enumeration: 'yes': 1, 'no': 2.

Applies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes. Enumeration: 'megacom': 227, 'lds': 231, 'scocs': 246, 'operator': 197, 'sdn': 225, 'suboperator': 198.

Applies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs.

Applies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no. Enumeration: 'yes': 1, 'no': 2.

Trunk table

Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number

Trunk Pool Group Reference Number - Association of trunk pool with trunk group

trunk table index

Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunkSlotPort to communicate slot-port info.

Create/Delete a row entry

ACM slot/port in the Vyxx format

Signaling Group Number that is the manager of this ISDN trunk member

Automatic Route Selection (ARS) Table

Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length

Call Pattern index

Dialed string entry that is used to match a pattern within the user-dialed number

Call Type Enumeration: 'service': 9, 'emergency': 1, 'national': 7, 'foreignNumberingPlanArea': 2, 'internationalOperator': 5, 'operator': 8, 'international': 4, 'local': 6, 'homeNumberingPlanArea': 3.

Maximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed string

Call group reference number

Call dial action Enumeration: 'denyCall': 1, 'allowCall': 2.

Create/Delete a row entry

Specifies the number of dialed digits to be deleted from the beginning of the string

Specifies the digit string to be inserted. Includes ',' for pause.

Minimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString element

Automatic Route Selection Facility Table

Each entry contains index, an ARS Facility dialing code and the Type of FAC feature

Fac Index

ARS Facility dialing code

Create/Delete a row entry

Feature Access Code(FAC) dial codes Supported Enumeration: 'contactPulse': 6, 'ars1': 1, 'ars2': 2, 'hold': 3, 'contactClose': 5, 'contactOpen': 4.

Ip Voice Codec Set Table

Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames

Ip Codec Set Identification

Ip Codec Index

Priority of codec set type (determines preferential use)

Ip Codec Type Enumeration: 'g729': 4, 'g729a': 5, 'g729b': 6, 'g723': 3, 'g711': 1, 'g729ab': 7, 'g711a': 2.

IP Codec Silence Suppression

IP Codec number of frames

Create/Delete a row entry

Fax operational protocol mode Enumeration: 'passthr': 3, 'off': 1, 't38': 4, 'relay': 2.

Redundant packets encoded during fax mode

Data modem protocol mode Enumeration: 'passthr': 3, 'off': 1, 'relay': 2.

Redundant packets encoded for Modem mode

TTY protocol mode Enumeration: 'passthr': 4, 'off': 1, 'uk': 3, 'us': 2.

Redundant packets encoded for TTY mode

Clear channel protocol mode. Preference for G711 wrapping Enumeration: 'disabled': 1, 'enabled': 2.

Redundant packets encoded for clear channel mode

Media Encryption type - 1st priority Enumeration: 'aea': 2, 'aes': 1, 'none': 3.

Media Encryption type - 2nd priority Enumeration: 'aea': 2, 'unused': 4, 'aes': 1, 'none': 3.

Media Encryption type - 3rd priority Enumeration: 'aea': 2, 'unused': 4, 'aes': 1, 'none': 3.

Slot Configuration Table

Each entry contains an index, number id, board type, and row status

Slot Config Table Index

This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1

Type of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 analog station ports mm716 has 24 high-density analog station ports mm717 has 24 high-density DCP station ports mm720 has 8 bri trunk ports (16 channels) mm722 has 2 bri trunk ports (4 channels) anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines briImm is G250 Internal media module 2 port BRI dcpImm is G250 Internal media module 12 port DCP ds1Imm is G250 Internal media module DS1 tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines tim508 is IG550 telephony interface module 8 analog station ports tim510 is IG550 telephony interface module DS1 tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations tim516 is IG550 telephony interface module 16 analog station ports tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks tim521 is IG550 telephony interface module 4 port BRI Enumeration: 'tim521': 26, 'tim508': 29, 'briImm': 17, 'ds1Imm': 19, 'mm712': 3, 'mm711': 4, 'mm710': 5, 'mm717': 14, 'mm716': 22, 'mm720': 2, 'mm714': 7, 'mm722': 8, 'anaImm1t2l': 9, 'tgm550': 23, 'mm312': 32, 'tim518': 31, 'tim516': 30, 'tim514': 24, 'anaImm4t2l': 16, 'tim510': 25, 'dcpImm': 18.

Create/Delete a row entry in this table

DS1 trunk instantiation Table

Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id.

DS1 Table Index

Name of the service provider and/or site destination of DS1 facility

Maximum transmission rate for DS1 interface Enumeration: 'rate2048': 2, 'rate1544': 1.

Selects the signaling method deployed on the given DS1 facility Enumeration: 'cas': 1, 'isdnExt': 4, 'isdnPri': 3, 'robbedBit': 2.

Channel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30 Enumeration: 'sequential': 1, 'timeSlot': 2.

Specifies what type of equipment is at the far end of the DS1 link Enumeration: 'host': 1, 'lineSide': 4, 'network': 2, 'pbx': 3.

Determines glare handling Enumeration: 'peerSlave': 4, 'peerMaster': 3, 'user': 0, 'network': 1.

QSIG glare handling when interface field is peerSlave Enumeration: 'a': 0, 'b': 1.

Specifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk. Enumeration: 'country18': 18, 'country19': 19, 'country10': 10, 'country11': 11, 'country12': 12, 'country13': 13, 'country14': 14, 'country15': 15, 'country16': 16, 'country17': 17, 'etsi': 62, 'country21': 21, 'country20': 20, 'country23': 23, 'country22': 22, 'country25': 25, 'country24': 24, 'country2': 2, 'country3': 3, 'country1': 1, 'country6': 6, 'country7': 7, 'country4': 4, 'country5': 5, 'qsig': 63, 'country8': 8, 'country9': 9.

Used in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service. Enumeration: 'a': 0, 'c': 2, 'b': 1, 'd': 3.

Sets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service. Enumeration: 'threeKhz': 0, 'speech': 1.

Specifies the companding method used by the far-end switch Enumeration: 'ulaw': 2, 'alaw': 1.

Specifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country code Enumeration: 'yes': 2, 'no': 1.

Create/Delete a row entry in this table

This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1

Signaling Group, associated with an ISDN trunk group, Table

Each entry contains an index, channel selection, associated signaling, primary D channel, and row status

SigGroup Table Index

If there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming calls

Specifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel present Enumeration: 'yes': 1, 'no': 2.

The identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit number

Create/Delete a row entry in this table

BRI trunk instantiation Table

Each entry contains an index, name, interface, side, country-protocol, bearer-capability, interface-companding, tei-assignment, directory-numberA, directory-numberB, spidA, spidB, endpoint-initialization, layer1-stable, and slot-number-id. This table instantiation completely specifies a BRI circuit, consisting of channel B1 and channel B2

BRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels).

Name of the service provider and/or site destination of BRI facility

Determines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlave Enumeration: 'peerSlave': 4, 'peerMaster': 3, 'user': 0, 'network': 1.

QSIG glare handling when interface field is peerSlave Enumeration: 'a': 0, 'b': 1.

Specifies the Layer 3 signaling protocol used by the country-specific service provider Enumeration: 'country18': 18, 'country19': 19, 'country10': 10, 'country11': 11, 'country12': 12, 'country13': 13, 'country14': 14, 'country15': 15, 'country16': 16, 'country17': 17, 'etsi': 62, 'country21': 21, 'country20': 20, 'country23': 23, 'country22': 22, 'country25': 25, 'country24': 24, 'country2': 2, 'country3': 3, 'country1': 1, 'country6': 6, 'country7': 7, 'country4': 4, 'country5': 5, 'qsig': 63, 'country8': 8, 'country9': 9.

Sets the information transfer capability in the Bearer Capability IE of SETUP message Enumeration: 'threeKhz': 0, 'speech': 1.

Specifies the companding method used )for all circuits on this media module) by the far-end switch Enumeration: 'ulaw': 2, 'alaw': 1.

LAPD address assignment for TEI field, auto is assigned by network provider Enumeration: 'auto': 1, 'zero': 2.

Channel B1's directory number

Channel B2's directory number

Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B1

Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B2

Determines whether the far end supports endpoint initialization Enumeration: 'yes': 1, 'no': 2.

Determines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stable Enumeration: 'yes': 1, 'no': 2.

Create/Delete a row entry in this table

This is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two numeric characters that identify the first B-channel of the physical BRI port circuit(for example the 1st port is always 01).

Incoming Routing Table

Each entry contains a dual index(trunk-group-reference-number and table index), match-pattern, delete-digits, insert-digits specification and routing-mode. This table instantiation completely specifies an the digit handling for an incoming dial-string pattern. Note 1: If the trunk-group employs Overlap Receiving, there will only be one entry (this may only have a delete or an insert operand). Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum of 50 entries. Each entry will have a Match-pattern, Length, Delete, and Insert element.

Incoming trunk-group reference number

Incoming Routing Table Index

Dial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match.

Maximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wild card value as well. Enumeration: 'blank': 99, 'len3': 3, 'len2': 2, 'len1': 1, 'len0': 0, 'len7': 7, 'len6': 6, 'len5': 5, 'len4': 4, 'len9': 9, 'len8': 8, 'len20': 20, 'len21': 21, 'len17': 17, 'len16': 16, 'len15': 15, 'len14': 14, 'len13': 13, 'len12': 12, 'len11': 11, 'len10': 10, 'len19': 19, 'len18': 18.

Specifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit string

Specifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit string

Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks. Enumeration: 'enbloc': 0, 'overlap': 1.

Create/Delete a row entry in this table

Signaling Group Nfas , associated with an ISDN trunk group, Table

Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status

Entry pointing to the associated signaling group number in the signaling group table

Nfas Table Index

The identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot number

For an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protocol will operate correctly with respect to physical facility circuit selection.

Create/Delete a row entry in this table