ATMPrivate-Mib: View SNMP OID List / Download MIB

VENDOR: CHROMATIS NETWORKS INC.


 Home MIB: ATMPrivate-Mib
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ChrTyp-MIB, Chromatis-MIB, ARMILLAIRE2000-MIB, ATM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 chrComIfAtmTable 1.3.6.1.4.1.3695.1.2.2.1 no-access
The chromatis private ATM Interface Configuration Table
     chrComIfAtmEntry 1.3.6.1.4.1.3695.1.2.2.1.1 no-access
Additional columns for the ATM Interface table entry.
         chrComIfAtmMaxPM 1.3.6.1.4.1.3695.1.2.2.1.1.1 integer32 read-only
describes the network operator that selects VPLs and VCLs for which he wants PM data collection, by setting PM Admin Status field of the VPL/VCL to UP. This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM.
         chrComIfAtmCurrentPM 1.3.6.1.4.1.3695.1.2.2.1.1.2 integer32 read-only
describes the network operator that selects VPLs and VCLs for which he wants PM data collection, by setting PM Admin Status field of the VPL/VCL to UP. This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM.
         chrComIfAtmIfType 1.3.6.1.4.1.3695.1.2.2.1.1.3 atmiftype read-write
Specifies the type of ATM cell layer interface defined on the physical path termination point modeled by this entry in the interface table. For UNI and BICI interfaces segment end point is automatically configured all VPLs and VCLs that reside on the interface. Default values For tribs is UNI and For OCM is NNI.
         atmInterfaceMaxVpiForVccs 1.3.6.1.4.1.3695.1.2.2.1.1.4 integer32 read-only
The maximum VPI that a VCC (PVCC or SVCC) within the interface can get. Greater values of VPI can be used only for VPCs.
         atmTCloopback 1.3.6.1.4.1.3695.1.2.2.1.1.5 integer32 read-only
Loopback on the Utopia Interface.
         chrComIfAtmAlarmVector 1.3.6.1.4.1.3695.1.2.2.1.1.6 integer32 read-only
describes the alarms related to the ATM Interface - represented by a Bit field.
         chrComIfAtmAlarmSeverityIndex 1.3.6.1.4.1.3695.1.2.2.1.1.7 integer32 read-write
An Index into into the alarm severity profile table, specifying the severity assignment for Atm Interface reported alarms.
 chrComAtmVplTable 1.3.6.1.4.1.3695.1.9.1.1 no-access
The Chromatis Private VPL Termination Point Configuration table extensions. This table augments the VPL configuration table in RFC 2515.
     chrComAtmVplEntry 1.3.6.1.4.1.3695.1.9.1.1.1 no-access
Additional columns for the VPL configuration table entry.
         chrComAtmVplNimPt 1.3.6.1.4.1.3695.1.9.1.1.1.1 truthvalue read-write
Specifies whether the VPL termination point is monitored non-intrusively.
         chrComAtmVplPMAdminStatus 1.3.6.1.4.1.3695.1.9.1.1.1.2 adminstatus read-write
Indication whether collection of Performance Monitoring (PM) data is enabled at this the VCL TP. The total number of VPLs and VCLs for which PM is collected is limited, therefore the SET(up) SNMP request might be rejected when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM interface table reflect that limitation.
         chrComAtmVplVpiApsChannelId 1.3.6.1.4.1.3695.1.9.1.1.1.3 integer read-write
Specifies the Vcl Vpi which is the APS channel of the protection group. NULL value signifies that the VPL is stand-alone and does not belong to any group.
         chrComAtmVplVciApsChannelId 1.3.6.1.4.1.3695.1.9.1.1.1.4 integer read-write
Specifies the Vcl Vci which is the APS channel of the protection group. NULL value signifies that the VPL is stand-alone and does not belong to any group.
         chrComAtmVplIfIndexVpPeerId 1.3.6.1.4.1.3695.1.9.1.1.1.5 integer32 read-write
Specifies the Vpl IfIndex which is relevant only on sink node, i.e. on the boundary of the protection domain. In specified the ID of a Virtual VPL that represents the whole protection peer. This V.VPL is the one that is cross connected. NullPeerID signifies unprotected VPL. Default NullVPPeerID (that specifies unprotected sink or an intermediate node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1.
         chrComAtmVpiPolicingMode 1.3.6.1.4.1.3695.1.9.1.1.1.6 integer32 read-write
The Policing mode to be applied on the ingress VCL. The policing is applied according to the parameters defined in the RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndex
 chrComAtmVclTable 1.3.6.1.4.1.3695.1.9.2.1 no-access
The Chromatis Private VCL Termination Point Configuration table extensions. This table augments the VCL configuration table in RFC 2515.
     chrComAtmVclEntry 1.3.6.1.4.1.3695.1.9.2.1.1 no-access
Additional columns for the VCL configuration table entry.
         chrComAtmVclNimPt 1.3.6.1.4.1.3695.1.9.2.1.1.1 truthvalue read-write
Specifies whether the VPL termination point is monitored non-intrusively.
         chrComAtmVclPMAdminStatus 1.3.6.1.4.1.3695.1.9.2.1.1.2 adminstatus read-write
Indication whether collection of Performance Monitoring (PM) data is enabled at this the VCL TP. The total number of VPLs and VCLs for which PM is collected is limited, therefore the SET(up) SNMP request might be rejected when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM interface table reflect that limitation.
         chrComAtmVclVpiApsChannelId 1.3.6.1.4.1.3695.1.9.2.1.1.3 integer read-write
Specifies the Vcl Vpi which is the APS channel of the protection group. NULL value signifies that the VPL is stand-alone and does not belong to any group.
         chrComAtmVclVciApsChannelId 1.3.6.1.4.1.3695.1.9.2.1.1.4 integer read-write
Specifies the Vcl Vci which is the APS channel of the protection group. NULL value signifies that the VPL is stand-alone and does not belong to any group.
         chrComAtmVclIfIndexVcPeerId 1.3.6.1.4.1.3695.1.9.2.1.1.5 integer32 read-write
Specifies the Vcl IfIndex which is the Virtual VCL that represents the whole protectio peer. This V.VCL is the one that is cross-connected. NULL value signifies that the VCL is not protected. Default NullVPPeerID (that specifies unprotected sink or an intermediate node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1
         chrComAtmVciPolicingMode 1.3.6.1.4.1.3695.1.9.2.1.1.6 integer32 read-write
The Policing mode to be applied on the ingress VCL. The policing is applied according to the parameters defined in the RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndex