ATMEDGE-MIB: View SNMP OID List / Download MIB

VENDOR: LANNET COMPANY


 Home MIB: ATMEDGE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, GEN-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atmEdge 1.3.6.1.4.1.81.26
       atmEdgePort 1.3.6.1.4.1.81.26.1
           atmEdgePortTable 1.3.6.1.4.1.81.26.1.1 no-access
               atmEdgePortEntry 1.3.6.1.4.1.81.26.1.1.1 no-access
                   atmEdgePortGroupId 1.3.6.1.4.1.81.26.1.1.1.1 integer read-only
Id of the slot to which the atm port belongs.
                   atmEdgePortId 1.3.6.1.4.1.81.26.1.1.1.2 integer read-only
Id of the port.
                   atmEdgePortHealthStatus 1.3.6.1.4.1.81.26.1.1.1.3 integer read-only
Indicates the health state of the port. When this field indicates carrierFailure, it means that there is no carrier: the agent should send a trap of type fault. Enumeration: 'sonetLinkError': 3, 'atmError': 2, 'notSupported': 255, 'ok': 1, 'sonetRemoteLinkError': 4.
                   atmEdgePortMACAddr 1.3.6.1.4.1.81.26.1.1.1.4 octet string read-only
MAC address of the ATM port. If the port has no MAC address, this value should be zero length octet string.
                   atmEdgePortATMAddr 1.3.6.1.4.1.81.26.1.1.1.5 octet string read-only
ATM address of the ATM port. If the port has no ATM address, this value should be zero length octet string.
                   atmEdgePortLanType 1.3.6.1.4.1.81.26.1.1.1.6 integer read-only
The type of the up link port. This is used do find whether the port wants to receive the association table and from what kind. ethernet - an Ethernet Edge device. token-ring - a Token Ring Edge device. notSupported means that currently the device doesn't currently act as an Edge Devices Enumeration: 'ethernet': 1, 'notSupported': 255, 'token-ring': 2.
                   atmEdgePortILMIStatus 1.3.6.1.4.1.81.26.1.1.1.7 integer read-only
The current state of the ILMI signalling of this port. Enumeration: 'down': 2, 'notsupported': 255, 'up': 1.
                   atmEdgePortSignalStatus 1.3.6.1.4.1.81.26.1.1.1.8 integer read-only
The current state of the ATM signalling for this port. Enumeration: 'down': 2, 'notsupported': 255, 'up': 1.
                   atmEdgePortActualUNIVersion 1.3.6.1.4.1.81.26.1.1.1.9 integer read-only
The type of signalling that is currently being used on this port. Enumeration: 'uni-30': 2, 'unknown': 1, 'notsupported': 255, 'uni-40': 4, 'uni-31': 3.
                   atmEdgePortNetworkPrefix 1.3.6.1.4.1.81.26.1.1.1.10 octet string read-write
The prefix of the ATM switch connected to this ATM port.
                   atmEdgePortDormantHealthStatus 1.3.6.1.4.1.81.26.1.1.1.11 integer read-only
Indicates the health state of the Dormant port. When this field indicates carrierFailure, it means that there is no carrier: the agent should send a trap of type fault. Enumeration: 'sonetLinkError': 3, 'atmError': 2, 'notSupported': 255, 'ok': 1, 'sonetRemoteLinkError': 4.
                   atmEdgePortRedundancyStatus 1.3.6.1.4.1.81.26.1.1.1.12 integer read-only
This item is relevant for ports which includes redundant links. This item indicates which of the links is active. Default value=masterNicActive(1). Enumeration: 'secondaryNicActive': 2, 'masterNicActive': 1, 'notSupported': 255.
       atmEdgeGroup 1.3.6.1.4.1.81.26.2
           atmEdgeGroupTable 1.3.6.1.4.1.81.26.2.1 no-access
               atmEdgeGroupEntry 1.3.6.1.4.1.81.26.2.1.1 no-access
                   atmEdgeGroupGroupId 1.3.6.1.4.1.81.26.2.1.1.1 integer read-only
Slot number in which the module is located.
                   atmEdgeGroupWorkState 1.3.6.1.4.1.81.26.2.1.1.2 integer read-only
One of the possible states of the module: this item indicates if the module is runing or booting. The value runAndBoot(3) indicates a serious software problem. Enumeration: 'boot': 2, 'none': 4, 'notSupported': 255, 'run': 1, 'runAndBoot': 3.
                   atmEdgeGroupBITResult 1.3.6.1.4.1.81.26.2.1.1.3 integer read-only
The Bit Indication Test in state faulty indicates a problem. The agent should send a fault trap in this case. Enumeration: 'notSupported': 255, 'faulty': 2, 'ok': 1.
       atmEdgeAssociation 1.3.6.1.4.1.81.26.3
           associationTable 1.3.6.1.4.1.81.26.3.1 no-access
This table contains all the information concerning the association between VLAN and ELAN names.
               associationEntry 1.3.6.1.4.1.81.26.3.1.1 no-access
An entry in the table, contains information about a VLAN associated to an ELAN on a particular up link port.
                   associationSlotIndex 1.3.6.1.4.1.81.26.3.1.1.1 integer read-only
Index which identifies the Slot inside the chassis.
                   associationPortIndex 1.3.6.1.4.1.81.26.3.1.1.2 integer read-only
Index which identifies the Port inside the Slot.
                   associationIndex 1.3.6.1.4.1.81.26.3.1.1.3 integer read-only
An arbitrary integer which uniquely identifies an association number.
                   associationVlan 1.3.6.1.4.1.81.26.3.1.1.4 integer read-write
The VLAN number.
                   associationElan 1.3.6.1.4.1.81.26.3.1.1.5 displaystring read-write
The ELAN name. For Ethernet devices the default is default. For Token Ring devices the default is defaultTrn
                   associationRowStatus 1.3.6.1.4.1.81.26.3.1.1.6 integer read-write
The status of the entry, not a standard RowStatus. To create an entry, the console finds the next available entry. It changes the entry to 'notReady', it fills the VLAN number and the ELAN name, and it changes the entry to 'createAndGo'. The device creates the interface and the LEC, when it finishes, it changes the entry to 'active'. To delete an entry, the console changes the entry to 'destroy'. To disable an entry, the console changes the entry to 'notInService'. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                   associationIfIndex 1.3.6.1.4.1.81.26.3.1.1.7 integer read-only
Creating a row in this table causes the agent to add one row in the interface table. Before setting the row status to active, the agent fills this field with the value of the ifIndex of the new created row.
 cti 1.3.6.1.4.1.81.29
       genCTIGroup 1.3.6.1.4.1.81.29.1
           genCTIGroupTable 1.3.6.1.4.1.81.29.1.1 no-access
Attributes pertaining to the CTI module.
               genCTIGroupEntry 1.3.6.1.4.1.81.29.1.1.1 no-access
An entry in the table.
                   genCTIGroupId 1.3.6.1.4.1.81.29.1.1.1.1 integer read-only
Slot number in which the module is located.
                   genCTIGroupCellLossAlarm 1.3.6.1.4.1.81.29.1.1.1.2 integer read-only
Indicates a condition of significant cell loss which results in performance degradation Enumeration: 'ok': 1, 'cellLossAlarm': 2.
                   genCTIGroupRedunAvailable 1.3.6.1.4.1.81.29.1.1.1.3 integer read-only
Indication on the availability of external redundancy unit Enumeration: 'noRedun': 1, 'redunAvailable': 2.
                   genCTIGroupRedunFlip 1.3.6.1.4.1.81.29.1.1.1.4 integer read-write
In regular conditions this item is in the noFlip state. Changing the item value to flipFiber will result in flipping to the other link. After this flip is completed the value will return back to the noFlip sate. this item is relevant only when a redundant link is available Enumeration: 'noFlip': 1, 'flipFiber': 2.
                   genCTIGroupFiberActive 1.3.6.1.4.1.81.29.1.1.1.5 integer read-only
When there is an external fiber redundancy this item shows which of the links is active Enumeration: 'fiberActiveA': 1, 'fiberActiveB': 2.
                   genCTIGroupVmuxMaster 1.3.6.1.4.1.81.29.1.1.1.6 integer read-only
On the poit to point voice connection via the FIM port one side is a master and the other side is a slave. This item shows whether the local module is master or slave Enumeration: 'localMaster': 1, 'localSlave': 2.
           genCTIPortTable 1.3.6.1.4.1.81.29.1.2 no-access
Table of ports in a CTI module.
               genCTIPortEntry 1.3.6.1.4.1.81.29.1.2.1 no-access
Entry in the table.
                   genCTIPortGroupId 1.3.6.1.4.1.81.29.1.2.1.1 integer read-only
Slot number in which the module is located.
                   genCTIPortId 1.3.6.1.4.1.81.29.1.2.1.2 integer read-only
The port index. The numbering scheme for the CTI ports follows: 1 - FIM Voice port 2 - UTP ATM Port 3 - SONET port
                   genCTIPortSync 1.3.6.1.4.1.81.29.1.2.1.3 integer read-only
Sync status for the port. Enumeration: 'notSupported': 255, 'ok': 1, 'noSync': 2.
                   genCTIPortRxAlarm 1.3.6.1.4.1.81.29.1.2.1.4 integer read-only
Rx Alarm status for the port Enumeration: 'rxAlarm': 2, 'notSupported': 255, 'ok': 1.
                   genCTIPortTxAlarm 1.3.6.1.4.1.81.29.1.2.1.5 integer read-only
Tx Alarm status for the port Enumeration: 'txAlarm': 2, 'notSupported': 255, 'ok': 1.