ATM-FORUM-SNMP-M4-MIB: View SNMP OID List / Download MIB

VENDOR: ATM FORUM


 Home MIB: ATM-FORUM-SNMP-M4-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HOST-RESOURCES-MIB, ATM-MIB, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atmForum 1.3.6.1.4.1.353
         atmForumNetworkManagement 1.3.6.1.4.1.353.5
             atmfM4 1.3.6.1.4.1.353.5.1
                 atmfM4SnmpNEView 1.3.6.1.4.1.353.5.1.3
                     atmfM4MIB 1.3.6.1.4.1.353.5.1.3.1
This MIB module is the SNMP version of the ATM Forum's M4 interface (network element view).
                         atmfM4MIBObjects 1.3.6.1.4.1.353.5.1.3.1.1
                             atmfM4NeVendor 1.3.6.1.4.1.353.5.1.3.1.1.1 displaystring read-only
The vendor of the ATM network element.
                             atmfM4NeVersion 1.3.6.1.4.1.353.5.1.3.1.1.2 autonomoustype read-only
The version of the ATM network element.
                             atmfM4NeStartTime 1.3.6.1.4.1.353.5.1.3.1.1.3 dateandtime read-only
The time at which the agent was last started; in other words, the time at which sysUpTime was zero.
                             atmfM4NeAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.4 integer32 read-write
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for the ATM network element. The default value for this object is zero.
                             atmfM4NeSuppressZeroStats 1.3.6.1.4.1.353.5.1.3.1.1.5 truthvalue read-write
When the value of this object is true, no entry will be created in any of the historical statistics tables for intervals in which all counts are zero. The default value for this object is true(1).
                             atmfM4PhysPathTpTable 1.3.6.1.4.1.353.5.1.3.1.1.6 no-access
The ATM Forum M4 interface Configuration table extensions for the physical path termination point.
                                 atmfM4PhysPathTpEntry 1.3.6.1.4.1.353.5.1.3.1.1.6.1 no-access
Columns conceptually added to the interface table entry for an ATM interface to model the physical path termination point. The row of the interface table modeling this object should also include columns for the TC Adapter object and the ATM interface table defined in RFC 1695. The interface table entry for the physical path TP fields of an ATM interface are set up without management system control (or else that setup is outside the scope of M4).
                                     atmfM4PhysPathTpHwUnitIndex 1.3.6.1.4.1.353.5.1.3.1.1.6.1.1 integer32 read-only
Specifies the index of the entry in the entPhysicalTable that represents the device (i.e., card) on which the physical path terminates.
                                     atmfM4PhysPathTpPortID 1.3.6.1.4.1.353.5.1.3.1.1.6.1.2 integer32 read-only
Identifies the port (within the card identified by the hardware unit index) on which the physical path terminates.
                                     atmfM4PhysPathTpAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.6.1.3 integer32 read-write
Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.
                             atmfM4TcAdapterTable 1.3.6.1.4.1.353.5.1.3.1.1.7 no-access
The ATM Forum M4 interface Configuration table extensions for the TC Adapter.
                                 atmfM4TcAdapterEntry 1.3.6.1.4.1.353.5.1.3.1.1.7.1 no-access
Columns conceptually added to the interface table entry for an ATM interface to model the TC Adapter. The row of the interface table modeling this object should also include columns for the physical path TP and the ATM interface table defined in RFC 1695. The interface table entry for the TC Adapter fields of an ATM interface are set up without management system control (or else that setup is outside the scope of M4).
                                     atmfM4TcACellScrambling 1.3.6.1.4.1.353.5.1.3.1.1.7.1.1 truthvalue read-write
This attribute is used by the management system to activate and deactivate the ATM cell scrambling function. When the value of this attribute is TRUE, cell scrambling on the interface is activated. This attribute shall be present only for interfaces that support the deactivation of cell scrambling. The ATM Forum UNI specification requires cell scrambling for ATM/SONET interfaces but allows cell scrambling to be controlled (i.e., turned on and off) for ATM/DS3 interfaces. The default value of this object is true(1).
                                     atmfM4TcAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.7.1.2 integer32 read-write
Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.
                             atmfM4AtmLayerTable 1.3.6.1.4.1.353.5.1.3.1.1.8 no-access
The ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
                                 atmfM4AtmLayerEntry 1.3.6.1.4.1.353.5.1.3.1.1.8.1 no-access
Columns conceptually added to the interface table entry for an ATM interface to model the ATM cell layer. The row of the interface table modeling this object should also include columns for the physical path TP and TC Adapter object, as well as the ATM interface table defined in RFC 1695. The default configuration of an entry in this table is used whenever the entries for the physical path TP, etc., are created. The management system configures a UNI, B-ICI, or B-ISSI on the interface by first modifying the atmfM4IfType column (this can be done in the same SNMP set-request that sets up the other necessary variables.
                                     atmfM4IfType 1.3.6.1.4.1.353.5.1.3.1.1.8.1.1 integer read-write
Specifies the type of ATM cell layer interface defined on the physical path termination point modeled by this entry in the interface table. The default value of this object is none(0). Enumeration: 'uni': 1, 'none': 0, 'bissi': 3, 'bici': 2.
                                     atmfM4IfLoopbackLocationCode 1.3.6.1.4.1.353.5.1.3.1.1.8.1.2 integer32 read-write
Specifies the code that shall exist in incoming OAM Loopback cells that are to be looped back at this interface. A value of zero shall indicate that the management system has not set any loopback location code for this interface. Therefore, zero should not be used as the actual loopback location code for any interface. This object shall be present only for table entries that represent an actual ATM cell layer interface (i.e., the atmfM4IfType is not none(0)). The default value of this object is zero.
                                     atmfM4IfSubscriberAddress 1.3.6.1.4.1.353.5.1.3.1.1.8.1.3 displaystring read-write
Specifies the address or newline-delimited list of addresses assigned to the UNI. This object shall be present only for table entries that represent a UNI interface. The default value of this object is the null string.
                                     atmfM4IfPreferredCarrier 1.3.6.1.4.1.353.5.1.3.1.1.8.1.4 displaystring read-write
Specifies the name of the default carrier to use when one is not explicitly identified in the call set-up message. This object shall be present only for table entries that represent a UNI interface and only when SVC services are supported. The default value of this object is the null string.
                                     atmfM4IfFarEndCarrierNetwork 1.3.6.1.4.1.353.5.1.3.1.1.8.1.5 displaystring read-write
Specifies the adjacent carrier to which the B-ICI transmission path is connected. This object shall be present only for table entries that represent a B-ICI interface and only when SVC services are supported. The default value of this object is the null string.
                             atmfM4VplTable 1.3.6.1.4.1.353.5.1.3.1.1.9 no-access
The ATM Forum M4 VPL Termination Point Configuration table extensions. This table augments the VPL configuration table in RFC 1695.
                                 atmfM4VplEntry 1.3.6.1.4.1.353.5.1.3.1.1.9.1 no-access
Additional columns for the VPL configuration table entry.
                                     atmfM4VplSegEndPt 1.3.6.1.4.1.353.5.1.3.1.1.9.1.1 truthvalue read-only
Specifies whether the VPL termination point is a segment end-point.
                             atmfM4VclTable 1.3.6.1.4.1.353.5.1.3.1.1.10 no-access
The ATM Forum M4 VCL Termination Point Configuration table extensions. This table augments the VCL configuration table in RFC 1695.
                                   atmfM4VclEntry 1.3.6.1.4.1.353.5.1.3.1.1.10.1 no-access
Additional columns for the VCL configuration table entry.
                                       atmfM4VclSegEndPt 1.3.6.1.4.1.353.5.1.3.1.1.10.1.1 truthvalue read-only
Specifies whether the VCL termination point is a segment end-point.
                             atmfM4VpXConnTable 1.3.6.1.4.1.353.5.1.3.1.1.11 no-access
The ATM Forum M4 VP Cross-Connect Configuration table extensions. This table augments the VP Cross-Connect configuration table in RFC 1695.
                                   atmfM4VpXConnEntry 1.3.6.1.4.1.353.5.1.3.1.1.11.1 no-access
Additional columns for the VP Cross-Connect table entry.
                                       atmfM4VpXConnRecover 1.3.6.1.4.1.353.5.1.3.1.1.11.1.1 truthvalue read-only
If FALSE, this cross-connection will be removed on failure.
                             atmfM4VcXConnTable 1.3.6.1.4.1.353.5.1.3.1.1.12 no-access
The ATM Forum M4 VC Cross-Connect Configuration table extensions. This table augments the VC Cross-Connect configuration table in RFC 1695.
                                   atmfM4VcXConnEntry 1.3.6.1.4.1.353.5.1.3.1.1.12.1 no-access
Additional columns for the VC Cross-Connect table entry.
                                       atmfM4VcXConnRecover 1.3.6.1.4.1.353.5.1.3.1.1.12.1.1 truthvalue read-only
If FALSE, this cross-connection will be removed on failure.
                             atmfM4VpNextVpiTable 1.3.6.1.4.1.353.5.1.3.1.1.13 no-access
The ATM Forum M4 VP Next VPI value table. This optional table supplies unused VPI values for use in creating entries in the atmVplTable.
                                   atmfM4VpNextVpiEntry 1.3.6.1.4.1.353.5.1.3.1.1.13.1 no-access
Each entry in this table represents the 'next' VPI value available for a given ATM interface. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
                                       atmfM4VpNextVpiValue 1.3.6.1.4.1.353.5.1.3.1.1.13.1.1 integer read-only
This object contains an appropriate value to be used for atmVplVpi when creating entries in the atmVplTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVplVpi value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
                             atmfM4VcNextVciTable 1.3.6.1.4.1.353.5.1.3.1.1.14 no-access
The ATM Forum M4 VC Next VCI value table. This optional table supplies unused VCI values for use in creating entries in the atmVclTable.
                                   atmfM4VcNextVciEntry 1.3.6.1.4.1.353.5.1.3.1.1.14.1 no-access
Each entry in this table represents the 'next' VCI value available for a given ATM interface. Each VPL Termination Point automatically has an entry in this table associated with it.
                                       atmfM4VcNextVciValue 1.3.6.1.4.1.353.5.1.3.1.1.14.1.1 integer read-only
This object contains an appropriate value to be used for atmVclVci when creating entries in the atmVclTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVclVci value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
                             atmfM4CellProtoCurrTable 1.3.6.1.4.1.353.5.1.3.1.1.15 no-access
The ATM Forum M4 Cell Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being collected.
                                   atmfM4CellProtoCurrEntry 1.3.6.1.4.1.353.5.1.3.1.1.15.1 no-access
An entry in the ATM Forum M4 Cell Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
                                       atmfM4CellProtoCurrSuspect 1.3.6.1.4.1.353.5.1.3.1.1.15.1.1 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4CellProtoCurrElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.15.1.2 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4CellProtoCurrSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.15.1.3 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4CellProtoCurrProtoErrors 1.3.6.1.4.1.353.5.1.3.1.1.15.1.4 gauge32 read-only
The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval.
                                       atmfM4CellProtoCurrInOAMCells 1.3.6.1.4.1.353.5.1.3.1.1.15.1.5 gauge32 read-only
The number of OAM cells received at this interface since the start of this interval.
                             atmfM4CellProtoHistTable 1.3.6.1.4.1.353.5.1.3.1.1.16 no-access
The ATM Forum M4 Cell Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
                                   atmfM4CellProtoHistEntry 1.3.6.1.4.1.353.5.1.3.1.1.16.1 no-access
An entry in the ATM Forum M4 Cell Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each fifteen- minute interval in which statistics are collected for it.
                                       atmfM4CellProtoHistIndex 1.3.6.1.4.1.353.5.1.3.1.1.16.1.1 integer no-access
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
                                       atmfM4CellProtoHistSuspect 1.3.6.1.4.1.353.5.1.3.1.1.16.1.2 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4CellProtoHistElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.16.1.3 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4CellProtoHistSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.16.1.4 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4CellProtoHistProtoErrors 1.3.6.1.4.1.353.5.1.3.1.1.16.1.5 gauge32 read-only
The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, during this interval.
                                       atmfM4CellProtoHistInOAMCells 1.3.6.1.4.1.353.5.1.3.1.1.16.1.6 gauge32 read-only
The number of OAM cells received at this interface during this interval.
                             atmfM4CellProtoErrorTable 1.3.6.1.4.1.353.5.1.3.1.1.17 no-access
The ATM Forum M4 Cell Protocol Monitoring Error Log table. This table maintains a record of the last error of each type encountered on each interface, as a result of ATM Cell Protocol Monitoring.
                                   atmfM4CellProtoErrorEntry 1.3.6.1.4.1.353.5.1.3.1.1.17.1 no-access
An entry in the ATM Forum M4 Cell Protocol Monitoring Error Log table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each error that has occurred since agent start-up.
                                       atmfM4CellProtoErrorCode 1.3.6.1.4.1.353.5.1.3.1.1.17.1.1 integer32 no-access
Indicates the type of error for which this entry contains information. The range and interpretation of this error code value is left up to the individual agent implementor.
                                       atmfM4CellProtoErrorTime 1.3.6.1.4.1.353.5.1.3.1.1.17.1.2 timestamp read-only
Value of sysUpTime when the error occurred.
                                       atmfM4CellProtoErrorReason 1.3.6.1.4.1.353.5.1.3.1.1.17.1.3 integer read-only
The cell header abnormality type: the reason for discarding the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI value out of range). Enumeration: 'unassignedVpiVciValue': 1, 'outOfRangeVpiVciValue': 2.
                                       atmfM4CellProtoErrorVpi 1.3.6.1.4.1.353.5.1.3.1.1.17.1.4 integer read-only
The VPI value of the discarded cell.
                                       atmfM4CellProtoErrorVci 1.3.6.1.4.1.353.5.1.3.1.1.17.1.5 integer read-only
The VCI value of the discarded cell.
                             atmfM4TcProtoCurrTable 1.3.6.1.4.1.353.5.1.3.1.1.18 no-access
The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being collected.
                                   atmfM4TcProtoCurrEntry 1.3.6.1.4.1.353.5.1.3.1.1.18.1 no-access
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
                                       atmfM4TcProtoCurrSuspect 1.3.6.1.4.1.353.5.1.3.1.1.18.1.1 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4TcProtoCurrElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.18.1.2 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4TcProtoCurrSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.18.1.3 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing ATM TC Adapter Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4TcProtoCurrDiscardHECViol 1.3.6.1.4.1.353.5.1.3.1.1.18.1.4 gauge32 read-only
The number of ATM cells discarded on this interface, due to a HEC violation, since the start of this interval.
                             atmfM4TcProtoHistTable 1.3.6.1.4.1.353.5.1.3.1.1.19 no-access
The ATM Forum M4 TC Adapter Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
                                   atmfM4TcProtoHistEntry 1.3.6.1.4.1.353.5.1.3.1.1.19.1 no-access
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each fifteen- minute interval in which statistics are collected for it.
                                       atmfM4TcProtoHistIndex 1.3.6.1.4.1.353.5.1.3.1.1.19.1.1 integer no-access
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
                                       atmfM4TcProtoHistSuspect 1.3.6.1.4.1.353.5.1.3.1.1.19.1.2 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4TcProtoHistElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.19.1.3 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4TcProtoHistSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.19.1.4 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4TcProtoHistDiscardHECViol 1.3.6.1.4.1.353.5.1.3.1.1.19.1.5 gauge32 read-only
The number of ATM cells discarded on this interface, due to a HEC violation, during this interval.
                             atmfM4VpUpcNpcCurrTable 1.3.6.1.4.1.353.5.1.3.1.1.20 no-access
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. This table maintains per-TP statistics for the fifteen-minute interval currently being collected.
                                   atmfM4VpUpcNpcCurrEntry 1.3.6.1.4.1.353.5.1.3.1.1.20.1 no-access
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. Each VPL Termination Point automatically has an entry in this table associated with it.
                                       atmfM4VpUpcNpcCurrSuspect 1.3.6.1.4.1.353.5.1.3.1.1.20.1.1 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4VpUpcNpcCurrElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.20.1.2 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4VpUpcNpcCurrSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.20.1.3 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4VpUpcNpcCurrDiscardedCells 1.3.6.1.4.1.353.5.1.3.1.1.20.1.4 gauge32 read-only
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VpUpcNpcCurrDiscardedClp0 1.3.6.1.4.1.353.5.1.3.1.1.20.1.5 gauge32 read-only
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                                       atmfM4VpUpcNpcCurrPassedCells 1.3.6.1.4.1.353.5.1.3.1.1.20.1.6 gauge32 read-only
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VpUpcNpcCurrPassedClp0 1.3.6.1.4.1.353.5.1.3.1.1.20.1.7 gauge32 read-only
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                             atmfM4VpUpcNpcHistTable 1.3.6.1.4.1.353.5.1.3.1.1.21 no-access
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. This table maintains per-interface statistics for previous fifteen-minute intervals.
                                   atmfM4VpUpcNpcHistEntry 1.3.6.1.4.1.353.5.1.3.1.1.21.1 no-access
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. Each VPL Termination Point automatically has an entry in this table associated with it.
                                       atmfM4VpUpcNpcHistIndex 1.3.6.1.4.1.353.5.1.3.1.1.21.1.1 integer no-access
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
                                       atmfM4VpUpcNpcHistSuspect 1.3.6.1.4.1.353.5.1.3.1.1.21.1.2 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4VpUpcNpcHistElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.21.1.3 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4VpUpcNpcHistSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.21.1.4 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4VpUpcNpcHistDiscardedCells 1.3.6.1.4.1.353.5.1.3.1.1.21.1.5 gauge32 read-only
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VpUpcNpcHistDiscardedClp0 1.3.6.1.4.1.353.5.1.3.1.1.21.1.6 gauge32 read-only
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                                       atmfM4VpUpcNpcHistPassedCells 1.3.6.1.4.1.353.5.1.3.1.1.21.1.7 gauge32 read-only
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VpUpcNpcHistPassedClp0 1.3.6.1.4.1.353.5.1.3.1.1.21.1.8 gauge32 read-only
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                             atmfM4VcUpcNpcCurrTable 1.3.6.1.4.1.353.5.1.3.1.1.22 no-access
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. This table maintains per-TP statistics for the fifteen-minute interval currently being collected.
                                   atmfM4VcUpcNpcCurrEntry 1.3.6.1.4.1.353.5.1.3.1.1.22.1 no-access
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. Each VCL Termination Point automatically has an entry in this table associated with it.
                                       atmfM4VcUpcNpcCurrSuspect 1.3.6.1.4.1.353.5.1.3.1.1.22.1.1 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4VcUpcNpcCurrElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.22.1.2 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4VcUpcNpcCurrSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.22.1.3 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4VcUpcNpcCurrDiscardedCells 1.3.6.1.4.1.353.5.1.3.1.1.22.1.4 gauge32 read-only
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VcUpcNpcCurrDiscardedClp0 1.3.6.1.4.1.353.5.1.3.1.1.22.1.5 gauge32 read-only
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                                       atmfM4VcUpcNpcCurrPassedCells 1.3.6.1.4.1.353.5.1.3.1.1.22.1.6 gauge32 read-only
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VcUpcNpcCurrPassedClp0 1.3.6.1.4.1.353.5.1.3.1.1.22.1.7 gauge32 read-only
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                             atmfM4VcUpcNpcHistTable 1.3.6.1.4.1.353.5.1.3.1.1.23 no-access
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. This table maintains per-interface statistics for previous fifteen-minute intervals.
                                   atmfM4VcUpcNpcHistEntry 1.3.6.1.4.1.353.5.1.3.1.1.23.1 no-access
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. Each VCL Termination Point automatically has an entry in this table associated with it.
                                       atmfM4VcUpcNpcHistIndex 1.3.6.1.4.1.353.5.1.3.1.1.23.1.1 integer no-access
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
                                       atmfM4VcUpcNpcHistSuspect 1.3.6.1.4.1.353.5.1.3.1.1.23.1.2 truthvalue read-only
If true, the statistics in this entry may be unreliable.
                                       atmfM4VcUpcNpcHistElapsedTime 1.3.6.1.4.1.353.5.1.3.1.1.23.1.3 timeinterval read-only
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
                                       atmfM4VcUpcNpcHistSupprIntvls 1.3.6.1.4.1.353.5.1.3.1.1.23.1.4 gauge32 read-only
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
                                       atmfM4VcUpcNpcHistDiscardedCells 1.3.6.1.4.1.353.5.1.3.1.1.23.1.5 gauge32 read-only
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VcUpcNpcHistDiscardedClp0 1.3.6.1.4.1.353.5.1.3.1.1.23.1.6 gauge32 read-only
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                                       atmfM4VcUpcNpcHistPassedCells 1.3.6.1.4.1.353.5.1.3.1.1.23.1.7 gauge32 read-only
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
                                       atmfM4VcUpcNpcHistPassedClp0 1.3.6.1.4.1.353.5.1.3.1.1.23.1.8 gauge32 read-only
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
                             atmfM4TestTypes 1.3.6.1.4.1.353.5.1.3.1.1.24
                                   atmfM4TestOAMLoopbackSeg 1.3.6.1.4.1.353.5.1.3.1.1.24.1
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that uniquely identifies an intermediate point responsible for looping back the cell. If this is absent, the loopback is performed at the end of the segment or connection. E.g., the OID { atmfM4TestOAMLoopbackSeg 5 } identifies that the loopback should be performed at the intermediate point labeled 5.
                                   atmfM4TestOAMLoopbackE2E 1.3.6.1.4.1.353.5.1.3.1.1.24.2
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell.
                             atmfM4VpTestTable 1.3.6.1.4.1.353.5.1.3.1.1.25 no-access
The ATM Forum M4 VP Termination Point Test table. This table allows tests to be run on VPL and VPC termination points. The operation of this table is entirely analogous to that of the ifTestTable in RFC 1573 (which was later deprecated in RFC 2233), except that the indexes into this table are different.
                                   atmfM4VpTestEntry 1.3.6.1.4.1.353.5.1.3.1.1.25.1 no-access
An entry containing objects for invoking tests on a VPL or VPC termination point.
                                       atmfM4VpTestObject 1.3.6.1.4.1.353.5.1.3.1.1.25.1.1 integer no-access
Specifies whether the test applies to the VPL termination point with the specified VPI, or the VPC termination point. Enumeration: 'vplTp': 1, 'vpcTp': 2.
                                       atmfM4VpTestId 1.3.6.1.4.1.353.5.1.3.1.1.25.1.2 testandincr read-write
This object identifies the current invocation of the interface's test.
                                       atmfM4VpTestStatus 1.3.6.1.4.1.353.5.1.3.1.1.25.1.3 integer read-write
This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'. Enumeration: 'inUse': 2, 'notInUse': 1.
                                       atmfM4VpTestType 1.3.6.1.4.1.353.5.1.3.1.1.25.1.4 autonomoustype read-write
A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that atmfM4VpTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
                                       atmfM4VpTestResult 1.3.6.1.4.1.353.5.1.3.1.1.25.1.5 integer read-only
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently. Enumeration: 'none': 1, 'success': 2, 'failed': 7, 'unAbleToRun': 5, 'aborted': 6, 'inProgress': 3, 'notSupported': 4.
                                       atmfM4VpTestCode 1.3.6.1.4.1.353.5.1.3.1.1.25.1.6 object identifier read-only
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or RowPointer textual conventions as defined in RFC 1903 [15]. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
                                       atmfM4VpTestOwner 1.3.6.1.4.1.353.5.1.3.1.1.25.1.7 ownerstring read-write
The entity which currently has the 'ownership' required to invoke a test on this interface.
                             atmfM4VcTestTable 1.3.6.1.4.1.353.5.1.3.1.1.26 no-access
The ATM Forum M4 VC Termination Point Test table. This table allows tests to be run on VCL and VCC termination points. The operation of this table is entirely analogous to that of the ifTestTable in RFC 1573 (which was later deprecated in RFC 2233), except that the indexes into this table are different.
                                   atmfM4VcTestEntry 1.3.6.1.4.1.353.5.1.3.1.1.26.1 no-access
An entry containing objects for invoking tests on a VCL or VCC termination point.
                                       atmfM4VcTestObject 1.3.6.1.4.1.353.5.1.3.1.1.26.1.1 integer no-access
Specifies whether the test applies to the VCL termination point with the specified VPI and VCI values, or to the VCC termination point. Enumeration: 'vccTp': 2, 'vclTp': 1.
                                       atmfM4VcTestId 1.3.6.1.4.1.353.5.1.3.1.1.26.1.2 testandincr read-write
This object identifies the current invocation of the interface's test.
                                       atmfM4VcTestStatus 1.3.6.1.4.1.353.5.1.3.1.1.26.1.3 integer read-write
This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'. Enumeration: 'inUse': 2, 'notInUse': 1.
                                       atmfM4VcTestType 1.3.6.1.4.1.353.5.1.3.1.1.26.1.4 autonomoustype read-write
A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that atmfM4VcTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
                                       atmfM4VcTestResult 1.3.6.1.4.1.353.5.1.3.1.1.26.1.5 integer read-only
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently. Enumeration: 'none': 1, 'success': 2, 'failed': 7, 'unAbleToRun': 5, 'aborted': 6, 'inProgress': 3, 'notSupported': 4.
                                       atmfM4VcTestCode 1.3.6.1.4.1.353.5.1.3.1.1.26.1.6 object identifier read-only
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or RowPointer textual conventions as defined in RFC 1903 [15]. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
                                       atmfM4VcTestOwner 1.3.6.1.4.1.353.5.1.3.1.1.26.1.7 ownerstring read-write
The entity which currently has the 'ownership' required to invoke a test on this termination point.
                             atmfM4EquipTable 1.3.6.1.4.1.353.5.1.3.1.1.28 no-access
The ATM Forum M4 Equipment table. This table augments the entPhysicalTable.
                                   atmfM4EquipEntry 1.3.6.1.4.1.353.5.1.3.1.1.28.1 no-access
An entry in the ATM Forum M4 Equipment table. Each entry of this table represents a piece of equipment within the ATM NE that neither is nor accepts a replaceable plug-in unit.
                                       atmfM4EquipAdminStatus 1.3.6.1.4.1.353.5.1.3.1.1.28.1.1 integer read-write
Used by the administrator to lock and unlock the object. Enumeration: 'down': 2, 'up': 1.
                                       atmfM4EquipLocation 1.3.6.1.4.1.353.5.1.3.1.1.28.1.2 displaystring read-write
The specific or general location of the component.
                                       atmfM4EquipOperStatus 1.3.6.1.4.1.353.5.1.3.1.1.28.1.3 integer read-only
This attributes identifies whether or not the component is capable of performing its normal functions. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                                       atmfM4EquipVendor 1.3.6.1.4.1.353.5.1.3.1.1.28.1.4 displaystring read-only
The vendor of the component.
                                       atmfM4EquipVersion 1.3.6.1.4.1.353.5.1.3.1.1.28.1.5 autonomoustype read-only
The version of the component.
                                       atmfM4EquipUserLabel 1.3.6.1.4.1.353.5.1.3.1.1.28.1.6 displaystring read-write
A user-friendly name for the piece of equipment. The default value of this object is the null string.
                                       atmfM4EquipAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.28.1.7 integer32 read-write
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.
                             atmfM4EquipHolderTable 1.3.6.1.4.1.353.5.1.3.1.1.29 no-access
The ATM Forum M4 Equipment Holder table. This table augments the entPhysicalTable.
                                   atmfM4EquipHolderEntry 1.3.6.1.4.1.353.5.1.3.1.1.29.1 no-access
An entry in the ATM Forum M4 Equipment Holder table. Each entry of this table represents a component within the ATM NE that accepts a replaceable plug-in unit.
                                       atmfM4EquipHolderType 1.3.6.1.4.1.353.5.1.3.1.1.29.1.1 integer read-only
The type of the component. Enumeration: 'slot': 4, 'shelf': 2, 'rack': 1, 'drawer': 3.
                                       atmfM4EquipHolderAcceptableTypes 1.3.6.1.4.1.353.5.1.3.1.1.29.1.2 displaystring read-only
The types of plug-in units that can be supported by the slot, separated by newline characters. This attribute shall be present only when the Equipment Holder represents a slot.
                                       atmfM4EquipHolderSlotStatus 1.3.6.1.4.1.353.5.1.3.1.1.29.1.3 integer read-only
This attributes identifies whether or not a plug-in unit is present in the slot. This attribute shall be present only when the Equipment Holder represents a slot. Enumeration: 'full': 2, 'empty': 1.
                                       atmfM4EquipHolderSwLoad 1.3.6.1.4.1.353.5.1.3.1.1.29.1.4 integer read-write
An index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is needed. This attribute shall be present only when the Equipment Holder represents a slot.
                             atmfM4PlugInUnitTable 1.3.6.1.4.1.353.5.1.3.1.1.30 no-access
The ATM Forum M4 Plug-In Unit table. This table augments the entPhysicalTable.
                                   atmfM4PlugInUnitEntry 1.3.6.1.4.1.353.5.1.3.1.1.30.1 no-access
An entry in the ATM Forum M4 Plug-In Unit table. Each entry of this table represents a piece of equipment within the ATM NE that is inserted into and removed from an Equipment Holder.
                                       atmfM4PlugInUnitAdminStatus 1.3.6.1.4.1.353.5.1.3.1.1.30.1.1 integer read-write
Used by the administrator to lock and unlock the object. Enumeration: 'down': 2, 'up': 1.
                                       atmfM4PlugInUnitAvailStatus 1.3.6.1.4.1.353.5.1.3.1.1.30.1.2 integer read-only
Provides further information regarding the state of the component. Enumeration: 'available': 1, 'dependency': 7, 'notInstalled': 5, 'inTest': 2, 'failed': 3, 'powerOff': 4, 'offLine': 6.
                                       atmfM4PlugInUnitOperStatus 1.3.6.1.4.1.353.5.1.3.1.1.30.1.3 integer read-only
This attributes identifies whether or not the component is capable of performing its normal functions. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                                       atmfM4PlugInUnitVendor 1.3.6.1.4.1.353.5.1.3.1.1.30.1.4 displaystring read-only
The vendor of the component.
                                       atmfM4PlugInUnitVersion 1.3.6.1.4.1.353.5.1.3.1.1.30.1.5 autonomoustype read-only
The version of the component.
                                       atmfM4PlugInUnitAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.30.1.6 integer32 read-write
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.
                             atmfM4HwRunningSwTable 1.3.6.1.4.1.353.5.1.3.1.1.32 no-access
The ATM Forum M4 Hardware Unit/Running Software relationship table. This table describes the software that is running on each hardware unit in the ATM NE.
                                   atmfM4HwRunningSwEntry 1.3.6.1.4.1.353.5.1.3.1.1.32.1 no-access
An entry in the ATM Forum M4 Hardware Unit/Running Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one in the hrSWRunTable.
                                       atmfM4HwRunningSwHwIndex 1.3.6.1.4.1.353.5.1.3.1.1.32.1.1 integer no-access
The index, in the entPhysicalTable, of the containing hardware unit in this pair.
                                       atmfM4HwRunningSwIndex 1.3.6.1.4.1.353.5.1.3.1.1.32.1.2 integer no-access
A unique number within the context of the containing hardware unit.
                                       atmfM4HwRunningSwSwIndex 1.3.6.1.4.1.353.5.1.3.1.1.32.1.3 integer read-only
The index, in the hrSWRunTable, of the software product represented by this entry.
                             atmfM4HwInstalledSwTable 1.3.6.1.4.1.353.5.1.3.1.1.33 no-access
The ATM Forum M4 Hardware Unit/Installed Software relationship table. This table describes the software that is installed on each hardware unit in the ATM NE.
                                   atmfM4HwInstalledSwEntry 1.3.6.1.4.1.353.5.1.3.1.1.33.1 no-access
An entry in the ATM Forum M4 Hardware Unit/Installed Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one in the hrSWInstalledTable.
                                       atmfM4HwInstalledSwHwIndex 1.3.6.1.4.1.353.5.1.3.1.1.33.1.1 integer no-access
The index, in the entPhysicalTable, of the containing physical entity in this pair.
                                       atmfM4HwInstalledSwIndex 1.3.6.1.4.1.353.5.1.3.1.1.33.1.2 integer no-access
A unique number within the context of the containing hardware unit.
                                       atmfM4HwInstalledSwSwIndex 1.3.6.1.4.1.353.5.1.3.1.1.33.1.3 integer read-only
The index, in the hrSWInstalledTable, of the software product represented by this entry.
                                       atmfM4HwSwAlarmSeverityIndex 1.3.6.1.4.1.353.5.1.3.1.1.33.1.4 integer32 read-write
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this piece of software installed on the hardware unit. The default value of this object is zero.
                             atmfM4AlarmSevDefault 1.3.6.1.4.1.353.5.1.3.1.1.34 atmfm4alarmseverity read-write
The default severity value used for new profile index/trap ID pairs that have not yet been modified. This value is also used whenever an object's alarm severity profile index is set to 0. The default value of this object is minor(3).
                             atmfM4AlarmSevProfileIndexNext 1.3.6.1.4.1.353.5.1.3.1.1.35 integer32 read-only
This object contains an appropriate value to be used for atmfM4AlarmSevProfileIndex when creating entries in the atmfM4AlarmSevProfileTable. The value -1 indicates that no unassigned entries are available. To obtain the index value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
                             atmfM4AlarmSevProfileTable 1.3.6.1.4.1.353.5.1.3.1.1.36 no-access
The ATM Forum M4 alarm severity profile table. This table specifies which profiles exist. Creating or deleting an entry in this table automatically creates or deletes the corresponding entries in the atmfM4AlarmSeverityTable.
                                   atmfM4AlarmSevProfileEntry 1.3.6.1.4.1.353.5.1.3.1.1.36.1 no-access
A group of severities, one for each alarm type in the communications alarm group.
                                       atmfM4AlarmSevProfileIndex 1.3.6.1.4.1.353.5.1.3.1.1.36.1.1 integer32 no-access
A number identifying this alarm severity profile.
                                       atmfM4AlarmSevProfileRowStatus 1.3.6.1.4.1.353.5.1.3.1.1.36.1.2 rowstatus read-only
This object is used to create a new row or to delete an existing row in the table.
                             atmfM4AlarmSevTable 1.3.6.1.4.1.353.5.1.3.1.1.37 no-access
The ATM Forum M4 alarm severity table. This table associates profile index and trap ID pairs with severities to be used for M4 alarm traps that have occurred. (Note that this table does not apply to cleared alarms.)
                                   atmfM4AlarmSevEntry 1.3.6.1.4.1.353.5.1.3.1.1.37.1 no-access
An entry in this table associates an alarm severity profile index/trap ID pair with a severity. Deleting a particular profile's row in the alarm severity profile table deletes all rows in this table with the same profile index. Conceptually, rows corresponding to all possible trap ID's are created in this table when a new alarm severity profile is created, but the agent will return a default value except for those few traps for which values have been set.
                                       atmfM4AlarmSevTrapId 1.3.6.1.4.1.353.5.1.3.1.1.37.1.1 object identifier no-access
The ID of the trap type to which this entry applies.
                                       atmfM4AlarmSeverity 1.3.6.1.4.1.353.5.1.3.1.1.37.1.2 atmfm4alarmseverity read-only
The severity to be used for this trap type when the TrapId is selected. If no value for this object has ever been set since the corresponding profile was created, the agent should return the value of the object atmfM4AlarmSevDefault.
                             atmfM4ForwardAllTraps 1.3.6.1.4.1.353.5.1.3.1.1.38
This is used as the value of the object atmfM4ForwardedTrapObject when traps from all objects are to be forwarded, or when there is only one object of the type that forwards the specified trap type.
                             atmfM4TrapForwardingTable 1.3.6.1.4.1.353.5.1.3.1.1.39 no-access
The ATM Forum M4 Trap forwarding discriminator table. This table specifies which traps will be sent to which management system.
                                   atmfM4TrapForwardingEntry 1.3.6.1.4.1.353.5.1.3.1.1.39.1 no-access
Information about a group of traps to be sent to a particular IP address. A new entry must have values for all attributes that do not have default values before its RowStatus column can be set to active(1).
                                       atmfM4TrapForwardingIndex 1.3.6.1.4.1.353.5.1.3.1.1.39.1.1 integer32 no-access
A unique number identifying the table entry.
                                       atmfM4TrapForwardingDest 1.3.6.1.4.1.353.5.1.3.1.1.39.1.2 ipaddress read-only
The IP address to which traps identified by this table entry should be sent.
                                       atmfM4ForwardedTrapId 1.3.6.1.4.1.353.5.1.3.1.1.39.1.3 object identifier read-only
The ID of the trap type to which this entry applies.
                                       atmfM4ForwardedTrapObject 1.3.6.1.4.1.353.5.1.3.1.1.39.1.4 rowpointer read-only
The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. The special value { 0 0 } indicates that traps of this type from all objects of the type that can generate it. It should also be used when traps from the ATM NE are to be specified.
                                       atmfM4TrapForwardingPort 1.3.6.1.4.1.353.5.1.3.1.1.39.1.5 integer32 read-only
The UDP port on the specified management system to which traps identified by this entry should be sent.
                                       atmfM4LowestForwardedSeverity 1.3.6.1.4.1.353.5.1.3.1.1.39.1.6 atmfm4alarmseverity read-only
The lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type specified has a severity associated with it.
                                       atmfM4ForwardedIndeterminate 1.3.6.1.4.1.353.5.1.3.1.1.39.1.7 truthvalue read-only
When this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified event. This object has significance only if the trap type specified has a severity associated with it.
                                       atmfM4TrapForwardingRowStatus 1.3.6.1.4.1.353.5.1.3.1.1.39.1.8 rowstatus read-only
This object is used to create a new row or to delete an existing row in the table.
                             atmfM4TrapLogTable 1.3.6.1.4.1.353.5.1.3.1.1.40 no-access
The ATM Forum M4 Trap Agent log table. This table defines the trap logs currently maintained by the agent. The management system creates entries in this table to specify which types of traps, from which ATM network elements, should be logged. Deleting an entry in this table deletes all entries in the corresponding log.
                                   atmfM4TrapLogEntry 1.3.6.1.4.1.353.5.1.3.1.1.40.1 no-access
Information about a single trap log.
                                       atmfM4TrapLogSrc 1.3.6.1.4.1.353.5.1.3.1.1.40.1.1 ipaddress no-access
The IP address of the SNMP agent whose traps are stored in this log.
                                       atmfM4TrapLogType 1.3.6.1.4.1.353.5.1.3.1.1.40.1.2 integer no-access
The type of traps stored in this log. Enumeration: 'alarm': 5, 'configChange': 3, 'stateChange': 4, 'objectDeleted': 2, 'objectCreated': 1.
                                       atmfM4TrapLogAdminStatus 1.3.6.1.4.1.353.5.1.3.1.1.40.1.3 integer read-only
The management system uses this object to stop and start the operations of this object. Enumeration: 'down': 2, 'up': 1.
                                       atmfM4TrapLogOperStatus 1.3.6.1.4.1.353.5.1.3.1.1.40.1.4 integer read-only
Indicates whether or not the log is capable of performing its normal operations. Enumeration: 'down': 2, 'up': 1, 'logFull': 3.
                                       atmfM4TrapLogFullAction 1.3.6.1.4.1.353.5.1.3.1.1.40.1.5 integer read-only
Indicates the action that should be performed when no more log entries can be created due to a log-full condition. If the value of this object is wrap(2), each new log entry will cause the deletion of the oldest entry still in the log, for as long as the log is still full. Enumeration: 'wrap': 2, 'halt': 1.
                                       atmfM4TrapLogRowStatus 1.3.6.1.4.1.353.5.1.3.1.1.40.1.6 rowstatus read-only
This object is used to create a new row or to delete an existing row in the table.
                             atmfM4LoggedTrapTable 1.3.6.1.4.1.353.5.1.3.1.1.41 no-access
The ATM Forum M4 Trap Agent logged trap table. This table is used to maintain the traps logged.
                                   atmfM4LoggedTrapEntry 1.3.6.1.4.1.353.5.1.3.1.1.41.1 no-access
Information about a single trap in the log. Entries in this table are created automatically but can be deleted by the management system. Entries that represent 'alarm' log types are augmented by the atmfM4LoggedAlarmEntry table.
                                       atmfM4LoggedTrapIndex 1.3.6.1.4.1.353.5.1.3.1.1.41.1.1 unsigned32 no-access
A unique number identifying this entry in the log. When the maximum value for this object has been reached, it will wrap around to 0.
                                       atmfM4LoggedTrapTime 1.3.6.1.4.1.353.5.1.3.1.1.41.1.2 dateandtime read-only
The time at which this trap was logged.
                                       atmfM4LoggedTrapID 1.3.6.1.4.1.353.5.1.3.1.1.41.1.3 integer32 read-only
The type of trap to which this entry applies. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred.
                                       atmfM4LoggedTrapObject 1.3.6.1.4.1.353.5.1.3.1.1.41.1.4 rowpointer read-only
The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred. The special value { 0 0 } indicates that the trap refers to the ATM NE entity itself.
                                       atmfM4LoggedTrapRowStatus 1.3.6.1.4.1.353.5.1.3.1.1.41.1.5 rowstatus read-write
This object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6).
                             atmfM4LoggedAlarmTable 1.3.6.1.4.1.353.5.1.3.1.1.42 no-access
The ATM Forum M4 Trap Agent logged alarm trap table. This table is used to maintain extra information for logged traps that represent alarm types.
                                   atmfM4LoggedAlarmEntry 1.3.6.1.4.1.353.5.1.3.1.1.42.1 no-access
Information about the alarm-specific attributes of a single trap in the log.
                                       atmfM4LoggedAlarmSeverity 1.3.6.1.4.1.353.5.1.3.1.1.42.1.1 atmfm4alarmlogseverity read-only
The perceived severity of the alarm, as specified by the agent that generated it.
                                       atmfM4LoggedAlarmBackedUp 1.3.6.1.4.1.353.5.1.3.1.1.42.1.2 truthvalue read-only
If the value of this object is true, the agent reported in this trap that the failed object had been backed up. This object is only present if it was included in the alarm trap corresponding to this log entry.
                                       atmfM4LoggedAlarmBUObject 1.3.6.1.4.1.353.5.1.3.1.1.42.1.3 rowpointer read-only
Indicates the object that provided back-up services to the failed object. This object is only present if it was included in the alarm trap corresponding to this log entry.
                                       atmfM4LoggedAlarmSpecificProb 1.3.6.1.4.1.353.5.1.3.1.1.42.1.4 displaystring read-only
Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by newline characters. This object is only present if it was included in the alarm trap corresponding to this log entry.
                                       atmfM4LoggedAlarmRepairAct 1.3.6.1.4.1.353.5.1.3.1.1.42.1.5 displaystring read-only
Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the problem descriptions are separated by newline characters. This object is only present if it was included in the alarm trap corresponding to this log entry.
                             atmfM4TrapAlarmSeverity 1.3.6.1.4.1.353.5.1.3.1.1.43 atmfm4alarmlogseverity no-access
The perceived severity of the alarm, as specified by the agent that generated it.
                             atmfM4TrapAlarmBackedUp 1.3.6.1.4.1.353.5.1.3.1.1.44 truthvalue no-access
If the value of this object is true, the failed object has been backed up.
                             atmfM4TrapAlarmBUObject 1.3.6.1.4.1.353.5.1.3.1.1.45 rowpointer no-access
Indicates the object that provided back-up services to the failed object.
                             atmfM4TrapAlarmSpecificProb 1.3.6.1.4.1.353.5.1.3.1.1.46 displaystring no-access
Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by newline characters.
                             atmfM4TrapAlarmRepairAct 1.3.6.1.4.1.353.5.1.3.1.1.47 displaystring no-access
Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the problem descriptions are separated by newline characters.
                         atmfM4MIBTraps 1.3.6.1.4.1.353.5.1.3.1.2
                             atmfM4MIBTrapPrefix 1.3.6.1.4.1.353.5.1.3.1.2.0
                                 atmfM4IfAisAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.1
Indicates that an AIS alarm condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfLcdAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.2
Indicates that an LCD (Loss of Cell Delineation) condition has occurred on the TC Adapter associated with the specified interface.
                                 atmfM4IfLofAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.3
Indicates that an LOF (Loss of Frame) condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfLopAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.4
Indicates that an LOP (Loss of Pointer) condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfLosAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.5
Indicates that an LOS (Loss of Signal) condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfPayloadMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.6
Indicates that a payload type mismatch condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfXmissionErrAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.7
Indicates that an transmission error condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfPathTraceMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.8
Indicates that path trace mismatch condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfRdiAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.9
Indicates that an RDI (Remote Defect Indication) condition has occurred on the physical path TP associated with the specified interface.
                                 atmfM4IfSignalLabelMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.10
Indicates that a signal label mismatch has occurred on the physical path TP associated with the specified interface.
                                 atmfM4VplTpAisAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.11
Indicates that an AIS alarm condition has occurred on the VPL TP associated with the specified interface and VPI.
                                 atmfM4VplTpRdiAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.12
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPL TP associated with the specified interface and VPI.
                                 atmfM4VpcTpAisAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.13
Indicates that an AIS alarm condition has occurred on the VPC TP associated with the specified interface and VPI.
                                 atmfM4VpcTpRdiAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.14
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPC TP associated with the specified interface and VPI.
                                 atmfM4VclTpAisAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.15
Indicates that an AIS alarm condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI.
                                 atmfM4VclTpRdiAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.16
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI.
                                 atmfM4VccTpAisAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.17
Indicates that an AIS alarm condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI.
                                 atmfM4VccTpRdiAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.18
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI.
                                 atmfM4HwBackPlaneAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.19
Indicates that a back-plane failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwCallEstErrAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.20
Indicates that a call establishment error condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwCongestionAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.21
Indicates that a congestion condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwExtIfDevProbAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.22
Indicates that an external interface device problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwLineCardAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.23
Indicates that a line-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwMultiplexerAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.24
Indicates that a multiplexer problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwPowerAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.25
Indicates that a power problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwProcessorAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.26
Indicates that a processor problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwProtectionPathAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.27
Indicates that a protection path problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwReceiverFailAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.28
Indicates that a receiver failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwPIUnitMissingAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.29
Indicates that a plug-in unit missing condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwPIUnitProbAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.30
Indicates that a plug-in unit problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwPIUnitMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.31
Indicates that a plug-in unit type mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwTimingProbAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.32
Indicates that a timing problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwXmitterFailAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.33
Indicates that a transmitter failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwTrunkCardAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.34
Indicates that a trunk-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwStorageCapacityAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.35
Indicates that a storage capacity problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwMemoryMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.36
Indicates that a memory mismatch alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwCorruptDataAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.37
Indicates that a corrupt data alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwSwEnvironAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.38
Indicates that a software environment problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwSwDownloadFailAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.39
Indicates that a software download failure has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwVersionMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.40
Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwFanFailAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.41
Indicates that a cooling fan failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwDoorOpenAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.42
Indicates that an enclosure door open condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwFuseFailAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.43
Indicates that a fuse failure alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4HwHighTempAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.44
Indicates that a high temperature condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4SwVersionMismatchAlarm 1.3.6.1.4.1.353.5.1.3.1.2.0.45
Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
                                 atmfM4VplTpUp 1.3.6.1.4.1.353.5.1.3.1.2.0.46
Indicates that the operational state of the specified VPL termination point has transitioned to 'up'.
                                 atmfM4VplTpDown 1.3.6.1.4.1.353.5.1.3.1.2.0.47
Indicates that the operational state of the specified VPL termination point has transitioned to 'down'.
                                 atmfM4VclTpUp 1.3.6.1.4.1.353.5.1.3.1.2.0.48
Indicates that the operational state of the specified VCL termination point has transitioned to 'up'.
                                 atmfM4VclTpDown 1.3.6.1.4.1.353.5.1.3.1.2.0.49
Indicates that the operational state of the specified VCL termination point has transitioned to 'down'.
                                 atmfM4VplXConnUp 1.3.6.1.4.1.353.5.1.3.1.2.0.50
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'up'.
                                 atmfM4VplXConnDown 1.3.6.1.4.1.353.5.1.3.1.2.0.51
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'down'.
                                 atmfM4VclXConnUp 1.3.6.1.4.1.353.5.1.3.1.2.0.52
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'up'.
                                 atmfM4VclXConnDown 1.3.6.1.4.1.353.5.1.3.1.2.0.53
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'down'.
                                 atmfM4HwUnitUp 1.3.6.1.4.1.353.5.1.3.1.2.0.54
Indicates that the operational state of the specified hardware unit has transitioned to 'up'.
                                 atmfM4HwUnitDown 1.3.6.1.4.1.353.5.1.3.1.2.0.55
Indicates that the operational state of the specified hardware unit has transitioned to 'down'.
                                 atmfM4AtmCellIfCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.56
Indicates that an ATM cell layer interface has just been created on the interface.
                                 atmfM4AtmCellIfDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.57
Indicates that the ATM cell layer interface has just been deleted.
                                 atmfM4VpcTpCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.58
Indicates that the VPC termination point has just been created.
                                 atmfM4VpcTpDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.59
Indicates that the VPC termination point has just been deleted.
                                 atmfM4VccTpCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.60
Indicates that the VCC termination point has just been created.
                                 atmfM4VccTpDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.61
Indicates that the VCC termination point has just been deleted.
                                 atmfM4VplXConnCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.62
Indicates that the VPL cross-connection has just been created. When a cross-connection is created along with its VPL endpoints, this trap should be emitted to indicate the creation of the entire group of objects.
                                 atmfM4VplXConnDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.63
Indicates that the VPL cross-connection has just been deleted. When a cross-connection is deleted along with its VPL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects.
                                 atmfM4VclXConnCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.64
Indicates that the VCL cross-connection has just been created. When a cross-connection is created along with its VCL endpoints, this trap should be emitted to indicate the creation of the entire group of objects.
                                 atmfM4VclXConnDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.65
Indicates that the VCL cross-connection has just been deleted. When a cross-connection is deleted along with its VCL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects.
                                 atmfM4HwUnitCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.66
Indicates that the specified hardware unit has been installed at the specified location.
                                 atmfM4HwUnitDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.67
Indicates that the specified hardware unit has been removed or de-installed from the specified location.
                                 atmfM4InstalledSwCreated 1.3.6.1.4.1.353.5.1.3.1.2.0.68
Indicates that the specified software package has been installed.
                                 atmfM4InstalledSwDeleted 1.3.6.1.4.1.353.5.1.3.1.2.0.69
Indicates that the specified software package has been removed.
                                 atmfM4IfChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.70
Indicates that the configuration of the interface has been changed.
                                 atmfM4VplTpChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.71
Indicates that the VPL termination point configuration has been changed.
                                 atmfM4VclTpChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.72
Indicates that the VCL termination point configuration has been changed.
                                 atmfM4VplXConnChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.73
Indicates that the VPL cross-connection configuration has been changed.
                                 atmfM4VclXConnChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.74
Indicates that the VCL cross-connection configuration has been changed.
                                 atmfM4HwUnitChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.75
Indicates that the specified hardware unit configuration has changed.
                                 atmfM4InstalledSwChanged 1.3.6.1.4.1.353.5.1.3.1.2.0.76
Indicates that the specified software package configuration has changed.
                         atmfM4MIBConformance 1.3.6.1.4.1.353.5.1.3.1.3
                             atmfM4Groups 1.3.6.1.4.1.353.5.1.3.1.3.1
                                 atmfM4General 1.3.6.1.4.1.353.5.1.3.1.3.1.1
The ATM Forum M4 ATM NE high-level objects.
                                 atmfM4PhysPathTpGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.2
The ATM Forum M4 interface Configuration table extensions for the physical path termination point.
                                 atmfM4TcAdapterGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.3
The ATM Forum M4 interface Configuration table extensions for the TC Adapter.
                                 atmfM4AtmLayerGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.4
The ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
                                 atmfM4VplGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.5
The ATM Forum M4 VPL Termination Point Configuration table extensions.
                                 atmfM4VclGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.6
The ATM Forum M4 VCL Termination Point Configuration table extensions.
                                 atmfM4VpXConnGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.7
The ATM Forum M4 VP Cross-Connect Configuration table extensions.
                                 atmfM4VcXConnGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.8
The ATM Forum M4 VC Cross-Connect Configuration table extensions.
                                 atmfM4VpNextVpiGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.9
The ATM Forum M4 VP Next VPI value table.
                                 atmfM4VcNextVciGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.10
The ATM Forum M4 VC Next VCI value table.
                                 atmfM4CellProtoCurrGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.11
The ATM Forum M4 Cell Protocol Monitoring Current Data table.
                                 atmfM4CellProtoHistGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.12
The ATM Forum M4 Cell Protocol Monitoring History Data table.
                                 atmfM4CellProtoErrorGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.13
The ATM Forum M4 Cell Protocol Monitoring Error Log table.
                                 atmfM4TcProtoCurrGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.14
The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table.
                                 atmfM4TcProtoHistGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.15
The ATM Forum M4 TC Adapter Protocol Monitoring History Data table.
                                 atmfM4VpUpcNpcCurrGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.16
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points.
                                 atmfM4VpUpcNpcHistGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.17
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points.
                                 atmfM4VcUpcNpcCurrGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.18
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points.
                                 atmfM4VcUpcNpcHistGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.19
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points.
                                 atmfM4VpTestGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.20
The ATM Forum M4 VP Termination Point Test table.
                                 atmfM4VcTestGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.21
The ATM Forum M4 VC Termination Point Test table.
                                 atmfM4EquipGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.22
The ATM Forum M4 Equipment table.
                                 atmfM4EquipHolderGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.23
The ATM Forum M4 Equipment Holder table.
                                 atmfM4PlugInUnitGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.24
The ATM Forum M4 Plug-In Unit table.
                                 atmfM4HwRunningSwGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.25
The ATM Forum M4 Hardware Unit/Running Software table.
                                 atmfM4HwInstalledSwGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.26
The ATM Forum M4 Hardware Unit/Installed Software table.
                                 atmfM4AlarmSevGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.27
The ATM Forum M4 Alarm handling objects.
                                 atmfM4TrapForwardingGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.28
The ATM Forum M4 Trap forwarding table.
                                 atmfM4TrapLogGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.29
The ATM Forum M4 Trap Agent log table.
                                 atmfM4LoggedTrapGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.30
The ATM Forum M4 Trap Agent logged trap table.
                                 atmfM4LoggedAlarmGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.31
The ATM Forum M4 Trap Agent logged alarm trap table.
                                 atmfM4NotificationsGroup 1.3.6.1.4.1.353.5.1.3.1.3.1.32
The ATM Forum M4 notification list.
                             atmfM4Compliances 1.3.6.1.4.1.353.5.1.3.1.3.2
                                 atmfM4Compliance 1.3.6.1.4.1.353.5.1.3.1.3.2.1
The compliance statements are listed as a set up conformance units that correspond to each table. Support for all tables is mandatory.