ATKKACTN-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: ATKKACTN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alliedTelesyn 1.3.6.1.4.1.207
         products 1.3.6.1.4.1.207.1
         mibObject 1.3.6.1.4.1.207.8
             repeaterMib 1.3.6.1.4.1.207.8.1
                 newRepeaterMib 1.3.6.1.4.1.207.8.1.20
                       acctonHubMIB 1.3.6.1.4.1.207.8.1.20.3
                           acctonCommon 1.3.6.1.4.1.207.8.1.20.3.1
                               accsystem 1.3.6.1.4.1.207.8.1.20.3.1.1
                                   majorVer 1.3.6.1.4.1.207.8.1.20.3.1.1.1 integer read-only
Software major version
                                   minorVer 1.3.6.1.4.1.207.8.1.20.3.1.1.2 integer read-only
Software minor version
                                   hardwareVer 1.3.6.1.4.1.207.8.1.20.3.1.1.3 integer read-only
Hardware version of system board
                               communityMgt 1.3.6.1.4.1.207.8.1.20.3.1.2
                                   communityStringSize 1.3.6.1.4.1.207.8.1.20.3.1.2.1 integer read-only
The length of the community string
                                   communityTableSize 1.3.6.1.4.1.207.8.1.20.3.1.2.2 integer read-only
The size of the community table
                                   communityTable 1.3.6.1.4.1.207.8.1.20.3.1.2.3 no-access
Community table
                                       communityEntry 1.3.6.1.4.1.207.8.1.20.3.1.2.3.1 no-access
                                           communityIndex 1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.1 integer read-only
Index in community table
                                           communityString 1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.2 displaystring read-write
Community string; the length is limited by communityStringSize
                                           communityAccessMode 1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.3 integer read-write
Access mode of the community Enumeration: 'readWrite': 2, 'readOnly': 1.
                                           communityStatus 1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.4 integer read-write
Entries marked valid or invalid can not be changed. When a manager wants to define a new community, he sets an entry from valid or invalid to underChange, then begins to define values in the table. After the entry is completed, change it to valid, then the community is enabled. To delete a community, just change the status to invalid. Currentlty, only three values are accepted: invalid -- 0, underChange -- 1, valid -- 2.
                               trapManagerMgt 1.3.6.1.4.1.207.8.1.20.3.1.3
                                   trapManagerTableSize 1.3.6.1.4.1.207.8.1.20.3.1.3.1 integer read-only
Size of trap manager table
                                   trapManagerTable 1.3.6.1.4.1.207.8.1.20.3.1.3.2 no-access
The trap manager table
                                       trapManagerEntry 1.3.6.1.4.1.207.8.1.20.3.1.3.2.1 no-access
                                           trapMgrIndex 1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.1 integer read-only
Index to the trap manager table
                                           trapMgrCommunityIndex 1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.2 integer read-write
Community string specified by the index in the community table
                                           trapMgrIpaddress 1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.3 ipaddress read-write
IP address of the network manager
                                           trapMgrEntryStatus 1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.4 integer read-write
Entries marked valid or invalid can not be changed. To define a new manager, set an entry from valid or invalid to underChange. Then fill in the required information. Setting the status to valid enables the entry. Setting the status to invalid deletes the entry. Currentlty, only three value are accepted: invalid -- 0, underChange -- 1, valid -- 2. Enumeration: 'valid': 2, 'underChange': 1, 'invalid': 0.
                               downloadMgt 1.3.6.1.4.1.207.8.1.20.3.1.4
                                   downloadServerIP 1.3.6.1.4.1.207.8.1.20.3.1.4.1 ipaddress read-write
The file server with the download file
                                   downloadFilename 1.3.6.1.4.1.207.8.1.20.3.1.4.2 displaystring read-write
Name of file to download
                                   downloadMode 1.3.6.1.4.1.207.8.1.20.3.1.4.3 integer read-write
Permanent upgrade stores download software into permanent storage of the agent device. Temporary upgrade just puts download software in RAM, often for a test only. Enumeration: 'temporary': 2, 'permanant': 1.
                                   downloadAction 1.3.6.1.4.1.207.8.1.20.3.1.4.4 integer read-write
DownloadAction triggers the download operation. The run option starts the new software after downloading is complete. The noRun option does not execute the new software. The new software will be effective after the next restart. Note that the noRun option is useful only when the download is permanent. Enumeration: 'run': 1, 'noRun': 2.
                               restart 1.3.6.1.4.1.207.8.1.20.3.1.5 integer read-write
A write to restart the machine Currentlty, only three value are accepted: normal -- 0, coldstart -- 1, warmstart -- 2.
                               acctest 1.3.6.1.4.1.207.8.1.20.3.1.6
                                   testTrap 1.3.6.1.4.1.207.8.1.20.3.1.6.1 integer read-write
A write to testTrap triggers a warm-start trap for testing trap capability Enumeration: 'test': 1.
                               ipxtrapManagerMgt 1.3.6.1.4.1.207.8.1.20.3.1.7
                                   ipxtrapManagerTableSize 1.3.6.1.4.1.207.8.1.20.3.1.7.1 integer read-only
Size of ipx trap manager table
                                   ipxtrapManagerTable 1.3.6.1.4.1.207.8.1.20.3.1.7.2 no-access
The ipx trap manager table
                                       ipxtrapManagerEntry 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1 no-access
                                           ipxtrapMgrIndex 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.1 integer read-only
Index to the ipx trap manager table
                                           ipxtrapMgrCommunityIndex 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.2 integer read-write
Community string specified by the index in the community table
                                           ipxtrapMgrNetNumber 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.3 octet string read-write
The network number portion of the IPX address of this network manager
                                           ipxtrapMgrNode 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.4 physaddress read-write
The node number portion of the IPX address of this network manager
                                           ipxtrapMgrEntryStatus 1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.5 integer read-write
Entries marked valid or invalid can not be changed. To define a new manager, set an entry from valid or invalid to underChange. Then fill in the required information. Setting the status to valid enables the entry. Setting the status to invalid deletes the entry. Enumeration: 'valid': 2, 'invalid': 1.