AT-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: AT-SWITCH-MIB
Download as:   
AT-SMI-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swi 1.3.6.1.4.1.207.8.4.4.4.87
This MIB file contains definitions of managed objects for the SWITCH module.
       swiTrap 1.3.6.1.4.1.207.8.4.4.4.87.0
           swiIntrusionDetectionTrap 1.3.6.1.4.1.207.8.4.4.4.87.0.6
An intrusion detection trap is generated when a port has intrusion detection enabled, and the action taken when intrusion is detected is to generate a trap. Intrusion is detected when the number of MAC addresses learned on the port exceeds the configured learn limit. The ifIndex of the port is included in the trap.
       swiPortTable 1.3.6.1.4.1.207.8.4.4.4.87.1 no-access
Table of port properties.
           swiPortEntry 1.3.6.1.4.1.207.8.4.4.4.87.1.1 no-access
An entry in the port information table.
               swiPortNumber 1.3.6.1.4.1.207.8.4.4.4.87.1.1.1 integer read-only
This object identifies the port of the switch.
               swiPortIngressLimit 1.3.6.1.4.1.207.8.4.4.4.87.1.1.20 integer read-write
The Ingress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
               swiPortEgressLimit 1.3.6.1.4.1.207.8.4.4.4.87.1.1.21 integer read-write
The Egress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
       swi56xxPortCounterTable 1.3.6.1.4.1.207.8.4.4.4.87.2 no-access
Table of swi56xx port counter properties.
           swi56xxPortCounterEntry 1.3.6.1.4.1.207.8.4.4.4.87.2.1 no-access
An entry in the port information table.
               swi56xxPortNumber 1.3.6.1.4.1.207.8.4.4.4.87.2.1.1 integer read-only
This object identifies the port of the switch.
               swi56xxRxTx64kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.2 counter32 read-only
The number of 64kB packets received and transmitted.
               swi56xxRxTx65To127kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.3 counter32 read-only
The number of 65kB To 127kB packets received and transmitted.
               swi56xxRxTx128To255kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.4 counter32 read-only
The number of 128kB To 255kB packets received and transmitted.
               swi56xxRxTx256To511kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.5 counter32 read-only
The number of 256kB To 511kB packets received and transmitted.
               swi56xxRxTx512To1023kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.6 counter32 read-only
The number of 512kB To 1023kB packets received and transmitted.
               swi56xxRxTx1024ToMaxPktSzPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.7 counter32 read-only
The number of 1024kB To MaxPktSz packets received and transmitted.
               swi56xxRxTx519To1522kPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.8 counter32 read-only
The number of 519kB To 1522kB packets received and transmitted.
               swi56xxPortRxOctets 1.3.6.1.4.1.207.8.4.4.4.87.2.1.9 counter32 read-only
The number of octets received.
               swi56xxPortRxPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.10 counter32 read-only
The number of packets received.
               swi56xxPortRxFCSErrors 1.3.6.1.4.1.207.8.4.4.4.87.2.1.11 counter32 read-only
The number of frames received containing a Frame Check Sequence error.
               swi56xxPortRxMulticastPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.12 counter32 read-only
The number of multicast packets received.
               swi56xxPortRxBroadcastPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.13 counter32 read-only
The number of broadcast packets received.
               swi56xxPortRxPauseMACCtlFrms 1.3.6.1.4.1.207.8.4.4.4.87.2.1.14 counter32 read-only
The number of valid PAUSE MAC Control frames received.
               swi56xxPortRxOversizePkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.15 counter32 read-only
The number of oversize packets received.
               swi56xxPortRxFragments 1.3.6.1.4.1.207.8.4.4.4.87.2.1.16 counter32 read-only
The number of fragments received.
               swi56xxPortRxJabbers 1.3.6.1.4.1.207.8.4.4.4.87.2.1.17 counter32 read-only
The number of jabber frames received.
               swi56xxPortRxMACControlFrms 1.3.6.1.4.1.207.8.4.4.4.87.2.1.18 counter32 read-only
The number of MAC Control frames (Pause and Unsupported) received.
               swi56xxPortRxUnsupportOpcode 1.3.6.1.4.1.207.8.4.4.4.87.2.1.19 counter32 read-only
The number of MAC Control frames with unsupported opcode (i.e. not Pause) received.
               swi56xxPortRxAlignmentErrors 1.3.6.1.4.1.207.8.4.4.4.87.2.1.20 counter32 read-only
The number of frames with alignment errors received.
               swi56xxPortRxOutOfRngeLenFld 1.3.6.1.4.1.207.8.4.4.4.87.2.1.21 counter32 read-only
The number of packets with length out of range received.
               swi56xxPortRxSymErDurCarrier 1.3.6.1.4.1.207.8.4.4.4.87.2.1.22 counter32 read-only
The number of frames with invalid data symbols received.
               swi56xxPortRxCarrierSenseErr 1.3.6.1.4.1.207.8.4.4.4.87.2.1.23 counter32 read-only
The number of false carrier conditions between frames received.
               swi56xxPortRxUndersizePkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.24 counter32 read-only
The number of undersized packets received.
               swi56xxPortRxIpInHdrErrors 1.3.6.1.4.1.207.8.4.4.4.87.2.1.25 counter32 read-only
swiPortRxIpInHdrErrors
               swi56xxPortTxOctets 1.3.6.1.4.1.207.8.4.4.4.87.2.1.26 counter32 read-only
The number of octets transmitted.
               swi56xxPortTxPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.27 counter32 read-only
The number of packets transmitted.
               swi56xxPortTxFCSErrors 1.3.6.1.4.1.207.8.4.4.4.87.2.1.28 counter32 read-only
The number of frames containing a Frame Check Sequence error transmitted.
               swi56xxPortTxMulticastPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.29 counter32 read-only
The number of multicast packets transmitted.
               swi56xxPortTxBroadcastPkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.30 counter32 read-only
The number of broadcast packets transmitted.
               swi56xxPortTxPauseMACCtlFrms 1.3.6.1.4.1.207.8.4.4.4.87.2.1.31 counter32 read-only
The number of valid PAUSE MAC Control frames transmitted.
               swi56xxPortTxOversizePkts 1.3.6.1.4.1.207.8.4.4.4.87.2.1.32 counter32 read-only
The number of oversize packets transmitted.
               swi56xxPortTxFragments 1.3.6.1.4.1.207.8.4.4.4.87.2.1.33 counter32 read-only
The number of fragments transmitted.
               swi56xxPortTxJabbers 1.3.6.1.4.1.207.8.4.4.4.87.2.1.34 counter32 read-only
The number of jabber frames transmitted.
               swi56xxPortTxPauseCtrlFrms 1.3.6.1.4.1.207.8.4.4.4.87.2.1.35 counter32 read-only
The number of Pause control frames transmitted.
               swi56xxPortTxFrameWDeferrdTx 1.3.6.1.4.1.207.8.4.4.4.87.2.1.36 counter32 read-only
The number of frames deferred once before successful transmission.
               swi56xxPortTxFrmWExcesDefer 1.3.6.1.4.1.207.8.4.4.4.87.2.1.37 counter32 read-only
The number of frame aborted after too many deferrals.
               swi56xxPortTxSingleCollsnFrm 1.3.6.1.4.1.207.8.4.4.4.87.2.1.38 counter32 read-only
The number of frames which experienced exactly one collision.
               swi56xxPortTxMultCollsnFrm 1.3.6.1.4.1.207.8.4.4.4.87.2.1.39 counter32 read-only
The number of frames which experienced 2 to 15 collisions (including late collisions).
               swi56xxPortTxLateCollsns 1.3.6.1.4.1.207.8.4.4.4.87.2.1.40 counter32 read-only
The number of frames which experienced late collisions.
               swi56xxPortTxExcessivCollsns 1.3.6.1.4.1.207.8.4.4.4.87.2.1.41 counter32 read-only
The number of frames aborted before transmission after 16 collisions.
               swi56xxPortTxCollisionFrames 1.3.6.1.4.1.207.8.4.4.4.87.2.1.42 counter32 read-only
The total number of collisions.
               swi56xxPortMiscDropEvents 1.3.6.1.4.1.207.8.4.4.4.87.2.1.43 counter32 read-only
The number of packets discarded at ingress port.
               swi56xxPortMiscTaggedPktTx 1.3.6.1.4.1.207.8.4.4.4.87.2.1.44 counter32 read-only
The number of VLAN tagged packets transmitted.
               swi56xxPortMiscTotalPktTxAbort 1.3.6.1.4.1.207.8.4.4.4.87.2.1.45 counter32 read-only
The number of Layer 2 and 3 packets aborted during transmission.
               swi56xxPortHWMultiTTLexpired 1.3.6.1.4.1.207.8.4.4.4.87.2.1.46 counter32 read-only
Number of multicast TTL expired frames.
               swi56xxPortHWMultiBridgedFrames 1.3.6.1.4.1.207.8.4.4.4.87.2.1.47 counter32 read-only
Number of multicast bridged frames
               swi56xxPortHWMultiRxDrops 1.3.6.1.4.1.207.8.4.4.4.87.2.1.48 counter32 read-only
Number of multicast frames dropped at reception
               swi56xxPortHWMultiTxDrops 1.3.6.1.4.1.207.8.4.4.4.87.2.1.49 counter32 read-only
NNumber of multicast frames dropped at transmission
       swiDebugVariables 1.3.6.1.4.1.207.8.4.4.4.87.3
           swiDebugMemoryParityErrors 1.3.6.1.4.1.207.8.4.4.4.87.3.1 counter32 read-only
For switches based on certain switch chips, the number of parity errors that have been detected in packet memory associated with the switch. If the device does not include the counting of memory parity errors, this variable will return 0.
       swiPortVlanTable 1.3.6.1.4.1.207.8.4.4.4.87.4 no-access
Table of port vlan properties.
           swiPortVlanEntry 1.3.6.1.4.1.207.8.4.4.4.87.4.1 no-access
An entry of vlan in the port information table.
               swiPortVlanPortNumber 1.3.6.1.4.1.207.8.4.4.4.87.4.1.1 integer no-access
This object identifies the port of the switch.
               swiPortVlanVlanId 1.3.6.1.4.1.207.8.4.4.4.87.4.1.2 integer read-only
This object identifies the vlans that a port attached to
               swiPortVlanControl 1.3.6.1.4.1.207.8.4.4.4.87.4.1.3 integer read-write
The writting to this object enables or disable the port in a vlan. The reading of this object indicates the port state in a vlan. Enumeration: 'enable': 1, 'disable': 2.
       swiPortVlanStateNotify 1.3.6.1.4.1.207.8.4.4.4.87.9
This objects informs a state change of a port in vlan.