AT-GS950-24-MIB: View SNMP OID List / Download MIB

Private MIB for AT-GS950 Series Switches

Tok_String

Tok_String

A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dependent security ID.

An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type of authentication protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same concsystual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a wrongValue error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of UserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoAuthProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoAuthProtocol, then an inconsistentValue error must be returned. If a set operation tries to set the value to the NoAuthProtocol while the UserPrivProtocol value in the same row is not equal to NoPrivProtocol, then an inconsistentValue error must be returned. That means that an SNMP command generator application must first ensure that the UserPrivProtocol is set to the NoPrivProtocol value before it can set the UserAuthProtocol value to NoAuthProtocol.

An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if so, the type of privacy protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same concsystual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a wrongValue error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of usmUserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoPrivProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoPrivProtocol, then an inconsistentValue error must be returned. Note that if any privacy protocol is used, then you must also use an authentication protocol. In other words, if usmUserPrivProtocol is set to anything else than NoPrivProtocol, then the corresponding instance of usmUserAuthProtocol cannot have a value of usmNoAuthProtocol. If it does, then an inconsistentValue error must be returned.

The status of this concsystual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is notReady. In particular, a newly created row for a user who employs authentication, cannot be made active until the corresponding usmUserCloneFrom and usmUserAuthKeyChange have been set. Further, a newly created row for a user who also employs privacy, cannot be made active until the usmUserPrivKeyChange has been set. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concsystual row can be modified, excsyst for usmUserOwnAuthKeyChange and usmUserOwnPrivKeyChange. For these 2 objects, the value of usmUserStatus MUST be active.

Tok_String

Tok_String

A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dsysendent security ID.

A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dsysendent security ID.

The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.

The status of this concsystual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is notReady. In particular, a newly created row for a user who employs authentication, cannot be made active until the corresponding usmUserCloneFrom and usmUserAuthKeyChange have been set. Further, a newly created row for a user who also employs privacy, cannot be made active until the usmUserPrivKeyChange has been set. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concsystual row can be modified, excsyst for usmUserOwnAuthKeyChange and usmUserOwnPrivKeyChange. For these 2 objects, the value of usmUserStatus MUST be active.

Tok_String

Tok_String

The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.

In order to gain the access rights allowed by this concsystual row, this securityModel must be in use.

The minimum level of security required in order to gain the access rights allowed by this concsystual row. A securityLevel of noAuthNoPriv is less than authNoPriv which in turn is less than authPriv. If multiple entries are equally indexed excsyst for this vacmAccessSecurityLevel index, then the entry which has the highest value for vacmAccessSecurityLevel is selected.

The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes read access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes write access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes access for notifications. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

The status of this concsystual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concsystual row can be modified.

Tok_String

Tok_String

The human readable name for a family of view subtrees.

The MIB subtree which when combined with the corresponding instance of vacmViewTreeFamilyMask defines a family of view subtrees.

The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to a sub-identifier of vacmViewTreeFamilySubtree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a 1 indicates that an exact match must occur; a 0 indicates wild card, i.e., any sub-identifier value matches. Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if, for each sub-identifier of the value of vacmViewTreeFamilySubtree, either: the i-th bit of vacmViewTreeFamilyMask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of vacmViewTreeFamilySubtree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of vacmViewTreeFamilySubtree, then the bit mask is extended with 1s to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all-1s being used (i.e., no wild card), and the family of view subtrees is the one view subtree uniquely identified by the corresponding instance of vacmViewTreeFamilySubtree. Note that masks of length greater than zero length do not need to be supported. In this case this object is made read-only.

Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or excluded from the MIB view.

The status of this concsystual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concsystual row can be modified.

Tok_String

Tok_String

The unique index value of a row in this table.

The unique index value of a row in this table.

A human readable string rsysresenting the corresponding value of snmpCommunityName in a Security Model indsysendent format.

The status of this concsystual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCommunityName and snmpCommunitySecurityName objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpCommunityStatus is active(1).

Tok_String

Tok_String

The locally arbitrary, but unique identifier associated with this snmpNotifyEntry.

This object contains a transport address. The format of this address dsysends on the value of the snmpTargetAddrTDomain object.

The Level of Security to be used when generating SNMP messages using this entry.

The status of this concsystual row in the SnmpTrapManagerTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpTrapManagerName, snmpTrapManagerAddress and snmpTrapManagerSecurityLevel objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpTrapManagerStatus is active(1).

An SNMP engines administratively-unique identifier. In a simple agent, this value is always that agents own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate.

This object is for enabling or disabling SNMP Community function.

The (concsystual) table listing the RADIUS servers with which the client shares a secret.

An entry (concsystual row) rsysresenting a RADIUS server with which the client shares a secret.

The RADIUS server with whom the client interacts.

The IP address of the RADIUS server referred to in this table entry.

The secret string which is shared between Server and Client

The maximum time within which the server has to respond for a request from the client

The allowed maximum no. of trials to be tried by a client to get response from the server for a request

The UDP port the client is using to send authentication requests to this server.

This object indicates the status of this entry. An entry is created in this table when this object is SET to createAndWait. The entry in this table is used when the status of this object is SET active. The entry in this table is not used when this object is SET notInService. An entry created in this table is be deleted when this object is SET destroy.

The UDP port the client is using to send accounting requests to this server.

Specifies the maximum number of interfaces that can be present in the system.

Specifies the maximum number of physical interfaces that can be present in the system.

Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of interfaces in the ifMainTable or any media-specif MIB. For creation of physical interfaces, any free ifIndex between 1 and ifMaxPhysInterfaces can be used.

A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the semantics of the MIB-2 ifIndex.

An entry containing management information applicable to a particular interface.

A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.

The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the ifMainTable and before setting any other object in this table. Once the type is specified, it cannot be changed - the interface should be deleted for changing the type of the interface. The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49), async(84) and hdlc(118) are physical interfaces while all other types are virtual or logical interfaces. For creation of physical interface types, it is mandatory to specify the handle to the device driver using the ifAlias object of the standard ifXTable before specifying the type. This handle could be something like eth1 or /dev/abcd.

The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP is operating over the interface, then this value indicates the IP MTU over this interface. For changing the MTU of any interface, the interface must be brought down first - changing MTU while the interface is administratively up is not permitted. If not specified during interface creation, a default value is assigned based on the ifMainType given to the particular interface. While configuring for logical VLAN interfaces, care should be taken to, configure this value as the lowest of the MTU values of the member ports.

The desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. The testing(3) state indicates that no operational packets can be passed - this state is not currently supported. When a managed system initializes, all interfaces start with ifMainAdminStatus in the down(2) state, its a default state also. As a result of either explicit management action or per configuration information retained by the managed system, ifMainAdminStatus is then changed to the up (1) state (or remains in the down(2) state).

The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported currently. If ifMainAdminStatus is down (2) then ifMainOperStatus would be down (2). If ifMainAdminStatus is changed to up (1) then ifMainOperStatus should change to up (1) if the interface is ready to transmit and receive work traffic; it should change to dormant (5) the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should change to lowerLayerDown(7) state if it cannot be made up as the interface sub-layer below it is down; it should remain in the down (2) state if and only if there is a fault that prevents it from going to the up (1) state; it should remain in the notPresent (6) state if the interface has missing (typically, hardware) components. The status unknown(4) is shown when it is not possible to determine the exact status of the interface - e.g. the interface sub-layer is performing negotiations - during this period the interface is not up but at the same time, it is not a fault condition and hence it cannot be shown as down - in such periods the status is shown as unknown. This object has the semantics of the ifOperStatus of the standard ifTable.

The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulation is llcSnap(6). If other(1) is specified then an automatic encapsulation type learning method is used in ARP for determining the encapsulation for unicast destinations while the multicast and broadcast destinations use ethernetV2(8). For PPP and MLPPP interfaces, the encapsulation type can only be other(1) and this is the default value. For FR VCs, the value can be nlpid(2) (for carrying protocols which have NLPID) or nlpidSnap(3) (for other protocols). The default is nlpid(2) and the types of protocols supported are inferred from the stack-layering implemented over the interface. For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3) (where the VC can carry multiplexed protocol traffic with each data packet containing the NLPID or SNAP header) or cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies the NLPID of the protocol or SNAP and the data packets do not contain these headers - for dedicated VCs). The default is cudNlpid(4). For ATM VCs, the default is llcSnap(6) but the vcMultiplexed(7) encapsulation is also supported. This object is not applicable to other interfaces.

The Bridge port type of this specified externally accessible port. Bridge Port type can be specified only for switch ports and not for router ports. providerNetworkPort - Port Connected to a single Provider. SVLAN Classification is based on only the PVID configured for the port for untagged packets. customerNetworkPortPortBased - Port in the S-VLAN component that can transmit or received frames for single customer. All packets received on this port, are mapped to one single service instance identified by the PVID of that Port. Accsystable Port Type will be always Admit only Untagged or Priority Tagged Frames on this port. customerNetworkPortStagged - Port in the S-VLAN component that can transmit or received frames for single customer. VLAN classification on this interface will be based on the S-tag received or on the PVID of the port. Ingress Filtering will be always enabled on this port. customerEdgePort - Port in a Provider Edge Bridge connected to a single customer. Multiple services can be provide on this port. The Packets received on this interface will be first classified to a CVLAN. CVLAN classification can be based on the Vid in the C-Tag present in the packet (if it C-tagged packet) or from the pvid of the port. Service instance selection (S-VLAN selection) for a frame is done based on the entry present in the C-VID registration table for the pair (C-VID, recsystion Port). CustomerEdgePort configuration is allowed only in Provider Edge Bridges. propCustomerEdgePort - Port connected to a single customer, where multiple services can be provided based on only Proprietary SVLAN classification tables. S-VLAN classification will not happen based on C-VID registration table on this port. propCustomerEdgePort configuration is allowed only in Provider Edge Bridges. propCustomerNetworkPort - Port connected to a single customer, where multiple service can be provided based on CVLANs by assigning one of the Proprietary SVLAN classification tables to this port. The services can also be assigned using other proprietary SVLAN classification tables where CVLAN is not the index of the table. propProviderNetworkPort - Port connected to a Q-in-Q Bridge located inside Provider Network. This port is part of S-VLAN component. If packets to be tagged and sent out of this port will have 0x8100 as the ether type. Similarly pakcets with standard Q tag (ether type as 0x8100) received will be considered as S-Tagged packets. customerBridgePort - Type of the port to be used in customer bridges as well in Provider(Q-in-Q) bridges. This type is not valid in Provider Core bridges as well as Provider Edge bridge. In Customer bridges and in Provider Bridges only customerPort option is allowed. Bridge Port Type cannot be set for a port-channel port, if some physical ports are aggregated in it. Also Bridge Port type cannot be set for a port, if part of a port-channel. Whenever the Bridge port type changes, the previous configuration associated with the port will be flushed. For example. whenever CNP(STagged) and PNP port types are changed to any other port type, - The unicast entries learnt on this port and - The VID translation table entries associated with the port will be flushed. Whenever CEP port type is changed to any other port type, - The unicast entries learnt on this port - The C-VID registration table entries associated with the port - The PEP configuration table entries - The service priority regeneration table entries will be flushed. Even the vlan membership of the port will be removed when the Pbport type is changed.

A RowStatus variable for addition, deletion and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status is active, the interface is created and ready to use in the respective protocol modules. When the status is notInService, the interface has not been registered with the respective protocol modules and as such those modules are not aware of the existence of the interface - creation is hence, incomplete. Setting an active interface to notInService results in de-registration/deletion of the interface from the respective protocol modules and all the configurations associated with that interface in those modules may be lost. Deletion of an interface, may affect the status of other interfaces which are layered above or below it in the Interface Stack (ifStackTable) and may result in other interfaces being made notReady or notInService.

A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the network interfaces in the system. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Entries are created automatically in this table for any interface sub-layer which is layer below IP using the ifStackTable. Similarly, entries are deleted from this table when the interfaces layering below IP is removed.

An entry containing management information applicable to a particular interface over which IP is operating.

The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obtaining of IP addresses through negotiation. The dynamic(3) option takes an IP address dynamically from the available server (dhcp/bootp/rarp) according to the protocol specified in ifIpAddrAllocProtocol. If the method specified is manual and the IP address is not provided (then the interface would be treated as a un-numbered interface.

Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PPP link - not under MP, MP interface and X.25 VC). If the interface is not a network interface then the default value of 0.0.0.0 is assigned and the interface is treated as a un-numbered interface by IP.

Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accsysted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface.

Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accsysted. If not specified, this object takes the default value based on the class of the IP address configured for the interface.

Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that interface being dropped and ICMP error messages being generated for the packets.

Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when ifIpAddrAllocMethod is set to dynamic (3). Currently rarp (1) option is not supported. The assigned value will be effective only when the interface admin status changes

A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable.

An entry containing IVR-related information applicable to a interface.

Indicates if this interface is a Bridged interface or not. A value of TRUE indicates that this interface is a Bridged interface and is capable of performing bridging of packets through this interface. A value of FALSE indicates that this interface is a Routed interface and is capable of performing routing of packets through this interface.

A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. This is the set of vlans configured by management to associate with the management interface.

A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. This is the set of vlans configured by management to dis-associate from the management interface. Get operation is not allowed for this object.

A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Secondary IpAddress configuration should not override the primary ip address configured for any of the interface Updation of entries in this table are not allowd when RowStatus is active

An entry contains the information associated with the secondary(additional) ip address configured to a particular interface.

Specifies the Secondary IP address associated with the interface

Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLSM is accsysted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface.

Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accsysted. If not specified, this object takes the default value based on the class of the IP address configured for the interface.

This object is used to manage creation and deletion of rows in this table.

This object defines the sysRmonenable flag for sysRmon

This object defines the flag for whether HW supports Etherstatistics or not

This object defines the enabled HWhistorysupp flag for sysRmon

This object defines the enabled HWAlarmsupp flag for sysRmon

This object defines the enabled HWEvent flag for sysRmon

Start or shutdown Link Aggregation Module in the system When set as start,resources required by Link aggregation module are allocated & Link aggregation module starts running. When shutdown, all resources used by Link aggregation module will be released to the system

Sets the Link Aggregation Module administrative status as enabled or disabled. The module can be enabled only when this object is set to enabled.

This object is used to enable Trace Statements in Link Aggregation Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, rsysresents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources excsyst Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set then user has to set the value 3.

This Object specifies the maximun number of ports that can attach to a port-channel

This Object specifies the maximum number of Port-channels Present in the system

This read only objects gives actual status of the Link Aggregation Module (Operational status of module). When Module is enabled Link Aggregation protocol starts functioning. When the module is disabled all the dynamically allocated memory will be freed and Link Aggregation protocol stops functioning.

A 6-octet read-write MAC address value used as a unique identifier for the System.

A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel

There is one entry in this table for each created port-channel port

The ifIndex of the port-channel(Aggregators interface index).

An index that uniquely identifies an entry in this table.

This object is used for configuring MacAddress that is to be used by the port-channel when sysLaPortChannelMacSelection is force. WARNING:The value configured should not conflict with the MAC address of system ports that are not configured to select this port-channel.

Indicates the MAC address selection method for for the port-channel. Dynamic - Port-channel MAC address is chosen as MAC address of an active port in the PortChannel. Force - Port-channel MAC address configured through sysLaPortChannelAdminMacAddress is used. The value can be changed to Force only after configuring a valid MAC address in sysLaPortChannelAdminMacAddress.

Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). disable(3) - channeling is disabled.

The number of ports actually configured to the port-channel

This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link.

Link selection policy to be used by the port-channel. The selection policies based on the IP address can be set if and only if hardware is present and supported.

The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set to 0, it will remove the current default port from the aggregator. To change the default port of an aggregator, first reset the object to 0 and then set the new ifIndex as default port.

A table that contains objects to set the port lacp mode of dot3adAggPortTable.

Each entry in this table is for each physical port that participates in Link Aggregation which can be either aggregatable or individual. This table is indexed by the PortIndex.

The ifIndex of the port

This object is used to enable LACP, disable LACP or manually aggregate a port

This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) - The port is capable of joining in aggregation group, when any of the ports in aggregation group goes down. down(2) - The port is operationally down in lower layers. or the port is operational in lower layers but temporarily not able to participate in aggregation because of different partner information in the same group. upIndividual(3) - The port is operating individually and is not taking part in aggregation.

A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout),the third bit corresponds to bit 2 (Aggregation),the fourth bit corresponds to bit 3 (Synchronization),the fifth bit corresponds to bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted),and the eighth bit corresponds to bit 7 (Expired). This object allows the RESET of the values of Actor LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns the current Port State of the Actor

Duration of the port to attach to the PortChannel.

A string of 8 bits,corresponding to the administrative values of Partner_State.The first bit corresponds to bit 0 of Partner_State (LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation),the fourth bit corresponds to bit 3 (Synchronization),the fifth bit corresponds to bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted),and the eighth bit corresponds to bit 7 (Expired). This object allows the RESET of the values of Partner LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns zeros for the Partner administrative values

The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port.

The Restore mtu stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This operation is allowed only during config-save-restore operation , during system initialization.

This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. static(0) - The port is involved only in static aggregation. i.e. the port can be a member of only the aggregation to which it is configured. dynamic(1) - The port participates in dynamic aggregation selection. i.e. the port will be a part of best aggregation selected based on System id and Admin key. This object is set to dynamic once the port is configured as a default port of a port channel.

Starts or shutdowns PNAC Module in the system. When set as start,resources required by PNAC module are allocated & PNAC module starts running. When shutdown, all resources used by PNAC module will be released to the system.

This object is used to configure for the choice of local or remote Authentication Server to be used by the Authenticator for its authentication services.

This object is the Network Access Server Identifier to be presented before the remote Authentication Server.

A table of system level information for each port supported by the EnterprisePNAC. An entry appears in this table for each port of this system. This table is an extension of dot1xPaePortTable of IEEE 802.1x MIB.

Configuration as port based or MAC based authentication and Supplicant count on a port. Index to this table is same as that of the dot1xPaePortTable, which is the InterfaceIndex.

The port number associated with this port.

The value of the combined Port status.

This object indicates dot1x multi hsot is enabled or disabled.

This object indicates mode is 802.1x or mac based.

This object indicates piggyback mode is enabled or disabled.

This object indicates vlan assignment is enabled or disabled.

This object indicates Secure vlan is enabled or disabled.

This read only objects gives actual status of the PNAC Module (Operational status of module). When Module is enabled PNAC protocol starts functioning. When the module is disabled all the dynamically allocated memory will be freed and PNAC protocol stops functioning.

This table contains authentication related User configuration information maintained by PNAC local Authentication Server.

Each entry contains User name, Password, Authentication protocol used, Authenticated session timeout and Access ports list of the User seeking authentication.

Identity of the User seeking authentication. A string of not more than 20 printable characters.

The secret Password of the User. A string of not more than 20 printable characters. When read, this always returns a String of length zero.

The Authentication protocol supported for the User.

The time in seconds after which the Authentication offerred to the User ceases. Maximum value of the object can be 7200 seconds. When the object value is 0, the ReAuthPeriod of the Authenticator port is used by Authenticator.

The complete set of ports of Authenticator to which the User is allowed or denied access, on the basis of setting of sysPnacASUserConfigPermission object.

For the set of ports indicated by sysPnacASUserConfigPortList object, the User is allowed access when this object is set allow and is denied access when this object is set deny.

Dynamic Vlan ID is assigned by Switch in local mode

This object indicates the status of this entry. An entry is created in this table when this object is SET to createAndWait. The entry in this table is used when the status of this object is SET active. The entry in this table is not used when this object is SET notInService. An entry created in this table is be deleted when this object is SET destroy.

This table contains authentication session information associated with each Guest vlan while Authenticator operates in port based authentication mode.

Guest Vlan ID assign with each port.

The port number associated with this port.

specify the guest vlan tag.0 for non exiting

System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character: ( ) A!V + _ = .

Version number of the Hardware.

Version number of the Firmware.

Specifies the means by which the default interface in the device gets the IP address. If manual mode is selected, the default interface takes the sysDefaultIpAddr configured in the system. If dynamic mode is selected, the default interface gets the IP address through dynamic IP address configuration protocols such as RARP client, BootP client, DHCP Client, etc. If the system fails to get the IP address dynamically through all the above protocols, the default interface uses the sysDefaultIpAddr configured in the system.

Default IP Address of the system. This IP address, if modified, will take effect only when the configuration is stored & restored.

IP subnet mask for the default IP address. This subnet mask, if modified, will take effect only when the configuration is stored & restored.

This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. Setting a value of true causes the switch to be restarted. When the switch operationally goes down, configuration save operation is initiated based on the configuration save option chosen. When the switch operationally come up, the saved configurations are restored based on the restore option chosen. Once the switch is restarted, the value of this object reverts to false.

Specifies whether the configurations of the switch has to be saved or not. The value noSave specifies that the configurations need not be saved. The value flashSave specifies that the configurations need to be saved in flash in the specified file name sysConfigSaveFileName. The value remoteSave specifies that the configurations need to be saved in specified remote system. The value startupConfig specifies that the configurations need to be saved in flash in the Startup Configuration File.

IP Address of the remote system to which the switch configurations have to be saved. This object is valid only if sysConfigSaveOption is chosen to be remoteSave.

Name of the file in which the switch configurations are to be saved. This object is valid only if sysConfigSaveOption is chosen to be flashSave or remoteSave.

SNMP interface are saved either in Startup Configuration File in the flash or in the specified sysConfigSaveFileName in the flash or in the chosen remote system, dsysending upon ConfigSaveOption.

Status of configuration save operation.

Specifies whether the switch configurations have to be restored or not. The value noRestore specifies that the switch configurations need not be restored when the system is restarted. The value restore specifies that the configurations need to be restored from the Startup Configuration File in the flash when the system is restarted.

IP Address of the remote system from where the switch configurations have to be downloaded to the Startup Configuration File in the flash.

The configuration file name in the remote system which has to be downloaded to the Startup Configuration File and set this name to Startup Configuration Restire File Name in the flash.

When set as true, the switch configurations will be downloaded from the specified remote system to the Startup Configuration File in the flash. As soon as the configuration download operation is completed, the value of this object reverts back to false.

The status of the switch configuration restore operation.

The Ip Address of machine from where the firmware has to be downloaded.

The firmware name which is to be downloaded to the switch.

Initiates the firmware Download operation.

The option specifies whether the debug logging messages is to be sent to console or to a file(system buffer) in the system.

The Ip address of TFTP server to which the log file is to be uploaded.

The file name to be used for uploading the logs to the remote system.

Initiates uploading of log file to the specified IP address in sysUploadLogFileToIp. The logs will be uploaded and saved in a file using the file name which was specified in sysLogFileName.

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

The physical location of this node (e.g., `telsyshone closet, 3rd floor). If the location is unknown, the value is the zero-length string.

The mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side through a RADIUS Server.

Ethernet address (base address) of the Switch. This base Mac Address, if modified, will take effect only when the Switch is restarted.

The date is display in the switch in the format, Hours:Minutes:Seconds Day Month Year e.g 19:10:31 11 08 2005 01-12 Month - beginning from January to December The railway time 00 to 24 hours can be displayed. The Display of the date is in the format , WeekDay Month Day Hours:Minutes:Seconds Year e.g 04 09 21 18:11:30 2005 01-07 WeekDay - beginning from Sunday to Saturday 01-12 Month - beginning from January to December

The port to be used by the hosts/PC to configure ISS using the Web Interface The HTTP server must be disabled before this configuration is done

This object is for enabling or disabling HTTP in the system.

The Default VLAN Identifier to be used at system startup. The VLAN Module creates this vlan as the default vlan. The Default VLAN Identifier, if modified, will take effect only when the switch is restarted

This time interval to be used at counting time seconds to logout web interface automatically.

This time interval to be used at counting time seconds to logout command interface automatically.

This object is for enabling or disabling cpu policer in the system.

This object is for enabling or disabling LED ECO mode in the system.

This object is for enabling or disabling powersaving in the system.

This object is for enabling or disabling DHCP auto configuration in the system.

This object is for set asyvlan to ivl or svl in the system.

This object is for enabling or disabling COS in the system.

This object is for enabling or disabling Trap in the system.

Enable/Disable Factory Default Reset function. The Factory Default Reset function is used to enable or disable the push button and reset function on the device. When the user wants to disable reset function that must be configure a password to lock it. Once want to recovery the reset function, the password was needed to verify authorize.

Input a password first and then the sysFDResetStateEnable can work correctly.

A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch.

An entry appears in this table for each interface in the system. In addition to that an entry with index 0 is created in this table by default. If sysConfigCtrlStatus of the entry 0 is made valid, then global control is chosen and the values against entry 0 is applicable for all the interfaces of the switch. If sysConfigCtrlStatus of the entry 0 is made invalid, then interface-wise control is chosen & the values against each interface index is applicable for that interface. At a particular point of time, either global control will be applicable or interface-wise control is applicable. Both will not be considered together. Index to the table is the interface index of the port.

Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index 0, that configuration will be considered as global configuration and is applicable for all the interfaces of the switch.

Controls the transmission of egress traffic over this interface. This value for entry 0 controls the egress traffic over all interfaces.

Enables or disables statistics collection for this interface. This value for entry 0 controls the stats collection for all interfaces.

Speficies the validity of the entry. If the Config Control Status for entry 0 is made valid, then global control is chosen in the system. It signifies that the values against entry 0 is applicable for all the interfaces of the switch. If the Config Control Status for entry 0 is made invalid, then interface-wise control is chosen. Then the values against each interface index is applicable for that interface. By default, sysConfigCtrlStatus will be invalid for entry 0 and valid for all other entries. (ie) by default, interface-wise configuration is enabled in the system. The status of entries other than the zeroth(0th) entry can not be made invalid.

A table to control the port specific parameters of the device like speed, duplex mode, etc.

An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.

Interface index of the port for which the configuration in this entry applies.

Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as auto, the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as full-duplex or half-duplex and about flow contol. If set as nonegotiation, the configured values for interface speed, duplex mode and flow control will be effective.

Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the PortCtrlMode is nonegotiation. If the PortCtrlMode is auto, it obtains the value from Hardware after negotiating with its peer

Configures interface speed. This object can be configured only if the PortCtrlMode is nonegotiation. If the PortCtrlMode is auto, it obtains the value from Hardware after negotiating with its peer

Enables / disables flow control for the interface. This object be configured only if the PortCtrlMode is nonegotiation. If the PortCtrlMode is auto, it obtains the value from Hardware after negotiating with its peer

Sets the auto/mdi/mdix of the copper interface. Fiber media is not support.

Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame is disabled.

Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame MTU is 10000.

Enables / disables dot1x EAP packet pass through for the interface. This object be configured only if the dot1x is disabled.

Enables / disables STP BPDU passthrough for the interface. This object be configured only if the RSTP/MSTP is disabled.

Provides control over the mirroring feature in the switch.

Specifies the port to which the mirrored traffic in the system is to be copied.

A table to control mirroring features either for the entire switch or for each interface in the switch. Parameters in this table are valid only when the sysMirrorStatus for the switch is not disabled.

An entry appears in this table for each interface in the system.

The interface index of the port for which the configuration in this entry applies.

Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port.

Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port.

Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port.

A table to control the rate limiting parameters either for the entire switch or for each interface in the switch.

An entry appears in this table for each physical interface in the switch.

The interface index for which the configuration in this entry applies.

Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This objects value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed. The value can be set between 64~100000(Kbits per second) in FE port, 64~1000000 (Kbits per second) in GE port. (Note: The multiple of 1850 Kbits/sec will be set automatically because the resolution of Giga-port Tx bandwidth control is 1850 Kbits/sec.)

Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets on this interface. The value that can be set for this object is limited by the underlying hardware. The value can be set between 64~100000(Kbits per second) in FE port, 64~1000000(Kbits per second) in GE port.

Provides control over the Ip authentication management feature in the switch.

A table to configure IP authorized managers in the system.

Each entry in this table rsysresents rules for particular IP authorized manager.

Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates Any Manager.

Specifies the IP address mask to be applied on sysIpAuthMgrIpAddr. Value 0.0.0.0 indicates mask for Any Manager.

Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the PortList, the manager can access the switch only through the configured ports.

Specifies the Vlans in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured in the VlanList, the manager can reside only in the configured vlan set. Access to the switch will be denied from any other vlan.

ssh If the particular bit is set to 1,corresponding service is allowed for the configured manager. By default all services are allowed for the configured manager.

This object indicates the status of this entry.

A table to control the rate limiting parameters either for the entire switch or for each interface in the switch.

An entry appears in this table for each physical interface in the switch.

The interface index for which the configuration in this entry applies.

This object indicates unknown unicast storm control function is enabled or disabled for device. When you enable unknown unicast storm control function, it will allowed you to limit the number of unknown unicast packets per second going through device.

This object indicates broadcast storm control function is enabled or disabled for device. When you enable broadcast storm control function, it will allowed you to limit the number of broadcast packets per second going through device.

This object indicates multicast storm control function is enabled or disabled for device. When you enable multicast storm control function, it will allowed you to limit the number of multicast packets per second going through device.

Allows to configure the limiting value for the maximum number of packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting on this interface. The value that can be set for this object is limited by the underlying hardware. The limit value must be low, medium, or high. (Notice : if the limit value is 0, it means unlimited.)

*This object indicates the status of this entry. An entry is created in this table when this object is SET to createAndWait. The entry in this table is used when the status of this object is SET active. The entry in this table is not used when this object is SET notInService. An entry created in this table is be deleted when this object is SET destroy.

Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol (STP) is not enabled in the network, especially when the down links are hubs or unmanaged switchs.The Switch will automatically shutdown the port and sends a log to the administrator.

Set a Loop detection Interval between 1 and 32767 seconds. The default is 2 seconds. This time interval to be used at counting time seconds to resend the CTP packet automatically.

This time interval to be used at counting time seconds to recover the disabled port automatically. The Loop Detection Recover Time can be set at 0 seconds, or 60 to 1000000 seconds. Entering 0 will disable the Loop Detection Recover Time. The default is 60 seconds.

A table to control Loopback detection features either for the entire switch or for each interface in the switch.

An entry appears in this table for each interface in the system.

The interface index of the port for which the configuration in this entry applies.

Provides control to per port enable or disable the loopback detection function. Default is disabled.

The loop status for this port.

A table to configure user authorized managers in the system.

User tabale entry.

User ID used for administration of this device.

User Name used for administration of this device.

This object indicates the status of this entry. An entry is created in this table when this object is SET to createAndWait. The entry in this table is used when the status of this object is SET active. The entry in this table is not used when this object is SET notInService. An entry created in this table is be deleted when this object is SET destroy.

This table contains the Multifield Classifier details. (In WEB, it means Class Map)

An IP Multi-field Classifier entry describes a single MF Classifier.

An index that enumerates the MultiField Classifier filter.

This Object specifies the ID of the filter the details of which should be matched against the incoming packet

This Object specifies the type of the filter

The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.

This table contains the Multifield filter details. (In WEB, it means Policy Map)

An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifiers sysDfsClfrId as part of their index.

An index that enumerates the classifier entries.

The Object refers to a MultiField Classifier Id which is the index for the MF Classifier table. A Valid value of this object is not mandatory for the creation of an entry in this table. Need to map a Class ID (sysDfsMultiFieldClfrId)

The Object refers to a In Profile Action Id which is the index for the InProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table. Must the same with sysDfsClfrId.

The Object refers to a Out Profile Action Id which is the index for the OutProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table. Must the same with sysDfsClfrId.

The status of this concsystual row. The objects sysDfsClfrInProActionId and sysDfsClfrOutProActionId can be modified at any time. But the other Objects can not be modified when the RowStatus is activefor the particular entry. when the Row Status is set to destroyfor any of the entries only the entry is removed from the table. As the Object in this table are indexed to various other tables they stand unmodified by setting the RowStatus to destroy.

The Action Table enumerates actions that can be performed to a stream of traffic which is inprofile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue.

Each entry in the action table allows description of one of action to be applied to traffic dsysending upon the treatment selected by sysDfsInProfileActionFlag.

An index that enumerates the In Profile Action entries. Must be match the Policy ID.

This Object defines the action to be performed on the packet, when the packets are found to be In profile. Default Priority = 1 (0x0001), TOS = 4 (0x0004), DSCP = 1024 (0x0400)

This Object kesyss the new priority value in case the action selected by sysDfsInProfileActionFlag is to assign a new priority/COS value.

This Object kesyss the new DSCP value in case the action selected by sysDfsInProfileActionFlag is to assign a new DSCP value.

The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.

The Action Table enumerates actions that can be performed to a stream of traffic which is out of profile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue.

Each entry in the action table allows description of one of action to be applied to traffic dsysending upon the treatment selected by sysDfsOutProfileActionFlag.

An index that enumerates the Out Profile Action entries. Must the same with sysDfsClfrId.

This Object defines the action to be performed on the packet when the packets are found to be out of profile. Drop = 2 (0x0002) DSCP = 4 (0x0004)

This Object kesyss the Meter Id to be added to the DataPath to which this particular OutProfileAction is applicable. Must the same with sysDfsClfrId.

The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active. The row comprises of an Meter Id which is an index to the Meter Table.

The Meter Table has the number of token with it and refreshCount value for associated with the meter.

An entry in the Meter Table describing a single instance of a Metering Unit.

An index that enumerates the Meter entries. Must the same with sysDfsClfrId.

This values specifies the number of tokens to be added to the meter bucket after each 8 usec. (Threshold kbps)

The status of this concsystual row. All writable objects in this row may be modified only when this rowstatus in not active.

A table containing the scheduling algorithm applied to a particular port.

An entry in this table gives mapping of a Port to user defined scheduled algorithm.

Port identifier to which scheduling algorightm is set.

Sets the packet scheduling algorithm for the port The default is strictPriority(1).

This object is for enabling or disabling syslog alert features in the system.

This object is for enabling or disabling timestamp option. When enabled, the messages (log alert messages) will hold the time stamp information. When disabled, the time stamp information will not be carried with the messages sent to the log servers.

Number of log buffers to be allocated in the system

Clears the buffered logs. This object is set to false by default. When set to True, the buffered logs will be cleared and the value of this object will become false again.

A table for configuring module specific log levels.

An entry containing logging level options for a particular module.

Specifies the module for which the log level option has to be configured.

Specifies the log level option to be set for a specific module.

The Syslog standard facilities. The facility to be used when sending Syslog messages to this server.

Specifies the syslog server IP to be used for remote logging. When configured, a new socket will be opened for this address. When the address is changed, the socket opened for the previous address will be closed and a new socket will be opened for this address.

A list of port default priority Entries.

A list of port default priority priorities.

The interface index for which the configuration in this entry applies.

The security state on specific port.

The max. learning number of MAC entries on specific port

This object is for enabling or disabling secure HTTP in the system.

This object is to configure the SSL port.

Set the trace level for SSL. BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace. Note:BIT 0 - Least significant bit BIT 7 - Most significant bit For example,setting the trace level to the value -0001 0101, will enable Init-Shutdown, data path and packet dump trace levels. Setting all the bits will enable all the trace levels and resetting them will disable all the trace levels.

This object is to configure the cipher-suites list. This field is a bit mask, setting a bit indicates that the corresponding cipher-list will be involved in the server authentication. BIT 0 - RSA-NULL-MD5 BIT 1 - RSA-NULL-SHA1 BIT 2 - RSA-DES-SHA1 BIT 3 - RSA-3DES-SHA1 BIT 4 - DH-RSA-DES-SHA1 BIT 5 - DH-RSA-3DES-SHA1 BIT 6 - RSA-EXP1024-DES-SHA1 Note:BIT 0 - Least significant bit BIT 6 - Most significant bit For example,setting the cipher list to the value - 001 0101, will include RSA-NULL-MD5, RSA-DES-SHA1 and DH-RSA-DES-SHA1 as cipher-list for authentication.

This object is to set the default cipher-suites list in sysSslCipherList. Setting DefaultCipherList to TRUE would set the following cipher-list for authentication: - RSA_3DES_SHA1 - RSA_DES_SHA1 - RSA_EXP1024_DES_SHA1 The value of this object reverts back to FALSE once the default cipher list is set.

This object is to configure the SSH version compatibility mode. When set to TRUE, both SSH version-1 and SSH Version-2 will be supported. When set to FALSE, SSH version-2 only will be supported. By default SSH version-2 is supported.

This object is to configure the cipher-suites list. This object takes values as bit mask. Setting a bit indicates that the corresponding cipher-list will be used for Encryption. The value of each bit position is as given below with bit 0 being the least significant bit: BIT 1 - DES-CBC BIT 0 - 3DES-CBC

This object is to configure the MAC-list. This object takes values as bit mask. Setting a bit indicates that the corresponding MAC-list will be used for authentication. The value of each bit position is as given below with bit 0 being the least significant bit: BIT 1 - HMAC-MD5 BIT 0 - HMAC-SHA1

Set the trace level for SSH. BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace. Note:BIT 0 - Least significant bit BIT 7 - Most significant bit For example,setting the trace level to the value -0001 0101, will enable Init-Shutdown, data path and packet dump trace levels. Setting all the bits will enable all the trace levels and resetting them will disable all the trace levels.

This object is for enabling or disabling ssh in the system.

This object is for enabling or disabling SNTP Client feature in the system.

The SNTP server polling interval in seconds.

This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 1970).

Specifies the primary SNTP server IP to be used for network time syncronization. When configured, a new socket will be opened for this address. When the address is changed, the socket opened for the previous address will be closed and a new socket will be opened for this address.

Specifies the secondary SNTP server IP to be used for network time syncronization. If the primary SNTP server fail, the system will try secondary SNTP server. When configured, a new socket will be opened for this address. When the address is changed, the socket opened for the previous address will be closed and a new socket will be opened for this address.

This object is used for distinguishing areas in the same time zone.

This object is for enabling or disabling Time Zone Daylight Saving Time feature in the system.

Specifies the Time Zone Offset from GMT in +/- Minutes.

The start month of Daylight Saving Time.

The start day of Daylight Saving Time.

The start hour of Daylight Saving Time.

The start minutes of Daylight Saving Time.

The end month of Daylight Saving Time.

The end day of Daylight Saving Time.

The end hour of Daylight Saving Time.

The end minutes of Daylight Saving Time.

The adjusted time of Daylight Saving Time.

Enable / Disable DiffServ function

DiffServ Type 01 : IP ToS value = 0

DiffServ Type 02 : IP ToS value = 4

DiffServ Type 03 : IP ToS value = 8

DiffServ Type 04 : IP ToS value = 12

DiffServ Type 05 : IP ToS value = 16

DiffServ Type 06 : IP ToS value = 20

DiffServ Type 07 : IP ToS value = 24

DiffServ Type 08 : IP ToS value = 28

DiffServ Type 09 : IP ToS value = 32

DiffServ Type 10 : IP ToS value = 36

DiffServ Type 11 : IP ToS value = 40

DiffServ Type 12 : IP ToS value = 44

DiffServ Type 13 : IP ToS value = 48

DiffServ Type 14 : IP ToS value = 52

DiffServ Type 15 : IP ToS value = 56

DiffServ Type 16 : IP ToS value = 60

DiffServ Type 17 : IP ToS value = 64

DiffServ Type 18 : IP ToS value = 68

DiffServ Type 19 : IP ToS value = 72

DiffServ Type 20 : IP ToS value = 76

DiffServ Type 21 : IP ToS value = 80

DiffServ Type 22 : IP ToS value = 84

DiffServ Type 23 : IP ToS value = 88

DiffServ Type 24 : IP ToS value = 92

DiffServ Type 25 : IP ToS value = 96

DiffServ Type 26 : IP ToS value = 100

DiffServ Type 27 : IP ToS value = 104

DiffServ Type 28 : IP ToS value = 108

DiffServ Type 29 : IP ToS value = 112

DiffServ Type 30 : IP ToS value = 116

DiffServ Type 31 : IP ToS value = 120

DiffServ Type 32 : IP ToS value = 124

DiffServ Type 33 : IP ToS value = 128

DiffServ Type 34 : IP ToS value = 132

DiffServ Type 35 : IP ToS value = 136

DiffServ Type 36 : IP ToS value = 140

DiffServ Type 37 : IP ToS value = 144

DiffServ Type 38 : IP ToS value = 148

DiffServ Type 39 : IP ToS value = 152

DiffServ Type 40 : IP ToS value = 156

DiffServ Type 41 : IP ToS value = 160

DiffServ Type 42 : IP ToS value = 164

DiffServ Type 43 : IP ToS value = 168

DiffServ Type 44 : IP ToS value = 172

DiffServ Type 45 : IP ToS value = 176

DiffServ Type 46 : IP ToS value = 180

DiffServ Type 47 : IP ToS value = 184

DiffServ Type 48 : IP ToS value = 188

DiffServ Type 49 : IP ToS value = 192

DiffServ Type 50 : IP ToS value = 196

DiffServ Type 51 : IP ToS value = 200

DiffServ Type 52 : IP ToS value = 204

DiffServ Type 53 : IP ToS value = 208

DiffServ Type 54 : IP ToS value = 212

DiffServ Type 55 : IP ToS value = 216

DiffServ Type 56 : IP ToS value = 220

DiffServ Type 57 : IP ToS value = 224

DiffServ Type 58 : IP ToS value = 228

DiffServ Type 59 : IP ToS value = 232

DiffServ Type 60 : IP ToS value = 236

DiffServ Type 61 : IP ToS value = 240

DiffServ Type 62 : IP ToS value = 244

DiffServ Type 63 : IP ToS value = 248

DiffServ Type 64 : IP ToS value = 252

This table contains multicast forwarding mode configuration for each instance running in the snooping switch

This table contains instance number and the multicast forwarding mode configuration for the particular instance

Instance ID pertaining to the global configuration entry.

Snooping module is shutdown or started through this object. When set to start, resources required by the Enterprise SNOOP module is allocated and the module starts running. When set to shutdown, all the resources are released back to the system and the module stops running.

This table contains global configuration of snooping for each instance running in switch

This table contains instance number, address type and the list of global configuration for the particular instance and address type

Instance ID pertaining to the global configuration entry. Currently only one instance is supported so it is always 1

Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping

Enables or disables IGMP/MLD snooping in the system. When set to enabled, the Enterprise IGS/MLDS module starts protocol operations. When set to disabled, the IGS/MLDS module stops performing protocol operations.

This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for RouterPortPurgeInterval seconds.When the timer expires, the learnt router port entry is purged. However if control messages are received from the router before the timer expiry, then the timer is restarted.

This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which rsysort has been received this timer runs for PortPurgeInterval seconds. This timer will be restarted whenever a rsysort message is received from a host on the specific port. If the timer expires, then , the learnt port entry will be purged from the multicast group.

This timer is used when proxy-reporting is disabled,the switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group from being forwarded to the router. This is the interval (in seconds) within which report messages for the same multicast group will not be forwarded. The ReportForwardTimer is per multicast group. This timer is started as soon as a report message for that group is forwarded out. Within this ReportForwardInterval if another report for the same group arrives, that report will not be forwarded.

When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number of queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds sysSnoopRetryCount, then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group.

The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receivers. The switch will send sysSnoopRetryCount queries before removing the port from the group membership information in the forwarding database.

Snooping module will forward reports only on router ports by default, to enable forwarding on all other ports this object to provide a administrative control to forward the reports on all the member ports of the VLAN

The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) indicates the IGS/MLDS module is currently disabled in the system.

The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the spanning tree mode is RSTP, IGMP/MLD general queries will be sent on all the non router ports present in the switch.If the spanning tree mode is MSTP, IGMP/MLD general queries will be sent on all the non router ports of the VLAN mapped for the MSTP instance.When this object is set to enabled ,the switch will generate general query messages

This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier. A switch should be configured as a querier for a VLAN only when there are no queriers in the network.

This table contains MAC based multicast forwarding information. This information is applicable only if the sysSnoopMcastForwardingMode is set to macbased

This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.

Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1

VLAN ID pertaining to the Multicast forwarding entry

InetAddressType pertaining to the Multicast forwarding entry

Multicast group MAC address.

List of ports onto which the multicast data packets destined for this group will be forwarded.

This table contains the list of ports through which a router, in a particular VLAN is reachable.

Contains the VLAN ID and list of ports on which routers are present in the VLAN.

Instance ID pertaining to the router port entry. Currently only one instance is supported so it is always 1

VLAN ID of the ports through which router is reachable.

It indicates whether the row belongs to IGMP / MLD snooping.

List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.

This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.

Contains snooping status , version and fast leave configuration for a specific VLAN.

Instance ID pertaining to VLAN filter table entry. Currently only one instance is supported so it is always 1

VLAN ID for which snooping configuration is to be done.

Indicates whether the row belongs to IGS/MLD snooping

Enables or disables IGS/MLDS on that specific VLAN

Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 2 i.e, V2(2) or MLD version 1 i.e, V1(1)

Enables or disables fast leave for the VLAN. When it is disabled,on reception of a leave message the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to enabled, the switch does not send a group specific query and immediately removes the port from the forwarding table.

Indicates whether the switch is configured as a querier in the VLAN

The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the VLAN. When set to enabled the switch will generate general query messages.

This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there are no queriers in the network.

List of ports which are configured statically as router ports

The status of a row in the VLAN filter table. By sysSnoopVlanRowStatus new entries can be created in the VLAN filter table and the existing entries can be removed from the VLAN filter table

This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis.

Contains snooping statistics for a particular VLAN.

Instance ID pertaining for the statistics entry. Currently only one instance is supported so it is always 1

VLAN ID for which snooping statistics are displayed

Indicates whether the statistics are for IGS/MLDS

Provides the statistics of General Queries received by the snooping switch.

Provides the statistics of Group Specific Queries received by the snooping switch.

Provides the statistics of IGMPv1/IGMPv2 Membership reports received by the snooping switch. In case of MLDS, it provides the statistics of MLDv1 membership reports.

Provides the statistics of IGMPv2/MLDv1 Leave messages received by the snooping switch.

Provides the statistics of General Queries transmitted by the snooping switch when it is act as a querier.

Provides the statistics of Group Specific Queries transmitted by the snooping switch.

Provides the statistics of IGMPv1/IGMPv2 Membership reports transmitted by the snooping switch.

Provides the statistics of IGMPv2/MLDv1 Leave messages transmitted by the snooping switch.

Provides the number of erroneous IGMP/MLD packets dropped by the snooping switch due to failure in checksum calculation.

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

List of per Virtual Bridge Module Parameters.

Virtual Bridge Rst Module Parameters.

Virtual Bridge number

The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.

The number of ports controlled by this bridging entity.

Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.

A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.

A list of information for each port of the bridge.

The port number of the port for which this entry contains bridge management information.

The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.

For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.

The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.

The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.

Table of StpScalars per virtual bridge

Per bridge StpScalars

Virtual Bridge number

An indication of what version of the Spanning Tree Protocol is being run. The value decLb100(2) indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return ieee8021d(3). If enterprise versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.

The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

The cost of the path to the root as seen from this bridge.

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]

The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

A table that contains port-specific information for the Spanning Tree Protocol.

A list of information maintained by every port about the Spanning Tree Protocol state for that port.

The port number of the port for which this entry contains Spanning Tree Protocol management information.

The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.

The ports current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).

The enabled/disabled status of the port.

The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this ports segment.

The Port Identifier of the port on the Designated Bridge for this ports segment.

The number of times this port has transitioned from the Learning state to the Forwarding state.

Table of ExtStpScalars per Virtual Context.

Per Virtual Context Stp Scalars

The version of Spanning Tree Protocol the bridge is currently running. The value stpCompatible(0) indicates the Spanning Tree Protocol specified in IEEE 802.1D and rstp(2) indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w. New value may be defined as future versions of the protocol become available.

The value used by the Port Transmit state machine to limit the maximum transmission rate.

The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t.

A table that contains port-specific Rapid Spanning Tree information.

A list of Rapid Spanning Tree information maintained by each port.

When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.

The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.

The operational value of the Edge Port parameter. The object is initialized to the value of dot1dStpPortAdminEdgePort and is set FALSE on reception of a BPDU.

The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.

The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the dot1dStpPortAdminPointToPoint object.

Table of Tp per virtual bridge

Per bridge TpScalars

The total number of Forwarding Database entries, which have been or would have been learned, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.

The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. This table maintains context ID as one more index to support Multiple Instances.

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

A unicast MAC address for which the bridge has forwarding and/or filtering information.

Either the value 0, or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of 0 indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).

The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridges addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridges ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.

A table that contains information about every port that is associated with this transparent bridge.

A list of information for each port of a transparent bridge.

The port number of the port for which this entry contains Transparent bridging management information.

The maximum size of the INFO (non-MAC) field that this port will receive or transmit.

The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.

A table that contains information about every high capacity port that is associated with this transparent bridge.

Statistics information for each high capacity port of a transparent bridge.

The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

Count of valid frames that have been received by this port from its segment which were discarded (i.e., filtered) by the Forwarding Process.

A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.

The most significant bits of statistics counters for a high capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable which indicates the least significant bits of the counter.

The number of times the associated dot1dTpPortInFrames counter has overflowed.

The number of times the associated dot1dTpPortOutFrames counter has overflowed.

The number of times the associated dot1dTpPortInDiscards counter has overflowed.

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.This table maintains context ID as one more index to support Multiple Instances.

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

The destination MAC address in a frame to which this entrys filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.

Either the value 0, or the port number of the port from which a frame must be received in order for this entrys filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.

This object indicates the status of the AllowedToGoTo PortList to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To fill the AllowedToGoTo portlist, we have to set the rowstatus as NOT_IN_SERVICE and set the appropriate port in the dot1dStaticAllowedToGoTable and set the rowstatus as ACTIVE to make the portlist available.

This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple Instances.

Information about a port, Whether it is an AllowedToGoTo member or not.

Indicates whether the port is an allowedToGoTo member.

List of dot1dExtBase group objects that can be configured per virtual context in the system.

dot1dExtBase group objects per virtual context.

Identifies the virtual context.

Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.

The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic.

The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs and on all ports, and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.

A table that contains capabilities information about every port that is associated with this bridge.

A set of capabilities information about this port indexed by dot1dBasePort.

Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.

A table that contains information about every port that is associated with this transparent bridge.

A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.

The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.

The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.

A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities.

A mapping of incoming User Priority to a Regenerated User Priority.

The User Priority for a frame received on this port.

The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.

A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).

User Priority to Traffic Class mapping.

The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority.

The Traffic Class the received frame is mapped to.

A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.

Regenerated User Priority to Outbound Access Priority mapping.

The Outbound Access Priority the received frame is mapped to.

A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.

GARP control information for a bridge port.

The GARP Join time, in centiseconds.

The GARP Leave time, in centiseconds.

The GARP LeaveAll time, in centiseconds.

A collection of objects indicating the optional capabilities of the device.

A collection of objects providing device-level control for the Multicast Filtering extended bridge services.

A collection of objects providing device-level control for the Priority services.

A collection of objects defining the User Priority applicable to each port for media which do not support native User Priority.

A collection of objects defining the User Priorities applicable to each port for media which support native User Priority.

A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.

A collection of objects defining the media dependent outbound access level for each priority.

A collection of objects providing port level control and status information for GARP operation.

A collection of objects providing 64-bit statistics counters for high capacity bridge ports.

A collection of objects providing overflow statistics counters for high capacity bridge ports.

The compliance statement for device support of Priority and Multicast Filtering extended bridging services.

List of dot1qBase objects that can be configured per virtual context in the system.

Virtual context dot1qBase objects.

Identifies a virtual context.

The version number of IEEE 802.1Q that this device supports.

The maximum IEEE 802.1Q VLAN ID that this device supports.

The maximum number of IEEE 802.1Q VLANs that this device supports.

The current number of IEEE 802.1Q VLANs that are configured in this device.

The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports.

A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable. This table maintains context ID as one more index to support Multiple Instances.

Information about a specific Filtering Database.

The identity of this Filtering Database.

The current number of dynamic entries in this Filtering Database.

A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. This table maintains context ID as one more index to support Multiple Instances.

Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.

A unicast MAC address for which the device has forwarding and/or filtering information.

Either the value 0, or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of 0 indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the dot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1qTpFdbStatus is not learned(3).

The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the devices addresses. The corresponding instance of dot1qTpFdbPort indicates which of the devices ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.

Either the value 0, or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of 0 indicates that the entry was learned via the layer2 port. Non-zero value indicates that this value must be used for forwading irrespective of dot1qTpFdbPort

A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only. This table maintains context ID as one more index to support Multiple Instances.

Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.

The destination MAC address in a frame to which this entrys filtering information applies. This object must take the value of a unicast address.

Either the value 0, or the port number of the port from which a frame must be received in order for this entrys filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.

This object indicates the status of the AllowedToGoTo PortList to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To fill the AllowedToGoTo portlist, we have to set the rowstatus as NOT_IN_SERVICE and set the appropriate port in the dot1qStaticAllowedToGoTable and set the rowstatus as ACTIVE to make the portlist available.

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple Instances.

Information about a port, Whether it is an AllowedToGoTo member or not.

Indicates whether the port is an allowedToGoTo member.

The port number of the port for which this entry applies.

A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only. This table maintains context ID as one more index to support Multiple Instances.

Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.

The destination MAC address in a frame to which this entrys filtering information applies. This object must take the value of a Multicast or Broadcast address.

Either the value 0, or the port number of the port from which a frame must be received in order for this entrys filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.

This object indicates the status of the PortLists (Eggress, Forbidden) used in the static multicast table. To fill the eggress and forbidden portlist, we have to set the rowstatus as NOT_IN_SERVICE and set the appropriate port in the dot1qForwardUnregPortConfigTable and set the rowstatus as ACTIVE to make the portlist available.

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

A table containing egress and forbidden ports for static multicast entry. This table maintains context ID as one more index to support Multiple Instance.

Information about a port, Whether it is a member or a forbidden member.

Indicates whether the port is a member or a forbidden member in the static multicast entry. addMember - to add the port in the egress member-list. addForbidden - to add the port in the forbidden member-list. delMember - to remove the port from the egress member-list. delForbidden - to remove the port from the forbidden member-list.

The VLAN-ID or other identifier referring to this VLAN.

Table containing number of VLAN deletions in the VLAN current database. This table maintains context ID as index to support Multiple Instances.

Entry for a virtual context.

The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.

A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. This table maintains context ID as one more index to support Multiple Instances.

Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.

A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.

The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable.

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learnt dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN and it will be removed when the last port leaves the VLAN.

The value of sysUpTime when this VLAN was created.

A table containing the information of egress ports for each VLAN. This table maintains context ID as one more index to support Multiple Instance.

Information about a port, Whether it is a tagged or an untagged member.

Indicates whether the port is a tagged or a untagged member in the VLAN. tagged - to add the port in the tagged portlist. untagged - to add the port in the untagged portlist.

A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset. This table maintains context ID as one more index to support Multiple Instance.

Static information for a VLAN configured into the device by (local or network) management.

An administratively assigned string, which may be used to identify the VLAN.

This object indicates the status of this entry.

A table containing the information of tagged, untagged and forbidden ports for each VLAN. This table maintains context ID as one more index to support Multiple Instance.

Forwarding information about a port, Whether it is a member or a forbidden member.

Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. addTagged - to add the port in the tagged portlist. addUntagged - to add the port in the untagged portlist. addForbidden - to add the port in the forbidden portlist. delTagged - to delete the port from the tagged portlist. delUntagged - to delete the port from the untagged portlist. delForbidden - to delete the port from the forbidden portlist.

A table containing per port control and status information for VLAN configuration in the device.

Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.

The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.

When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. When this is admitOnlyUntaggedAndPriorityTagged the device will recieve only untagged and priority tagged frames on this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.

When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.

The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port.

The total number of failed GVRP registrations, for any reason, on this port.

The Source MAC Address of the last GVRP message received on this port.

The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration.

List of per Virtual Context Mst Module Parameters.

Virtual Context Mst Module Parameters.

Identifies the Virtual Context.

The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. All memory should be released on all ports.

The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, dot1sSystemControl set to start.

The Maximun number of spanning trees to be allowed. A User may limit the Number of Spanning Tree instance to be allowed in the Bridge.

Indicates Maximum number of spanning tree Instances supported.

Indicates the Maximum Hop Count value. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1sCistBridgePriority or dot1sMstiBridgePriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.

The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

The Cost of the path to the CIST Root as seen from this bridge.

The Cost of the path to the CIST Regional Root as seen from this bridge.

The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.

The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.

The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state.

The number of times MSTP Module has been enabled.

The number of times MSTP Module has been disabled.

The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t.

This object is used to enable Trace Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of trace levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Trace Option to any value will cause the Debug Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.

This object is used to enable Debug Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the level of debug is as follows: 0 - Init and Shutdown Debug statements 1 - Management Debug statements 2 - Memory related Debug statements 3 - BPDU related Debug statements 4 - Event Handling Debug statements 5 - Timer Module Debug statements 6 - Port Information SEM Debug statements 7 - Port Receive SEM Debug statements (valid in the case of MSTP alone) 8 - Role Selection SEM Debug statements 9 - Role Transition SEM Debug statements 10 - State Transition SEM Debug statements 11 - Protocol Migration SEM Debug statements 12 - Topology Change SEM Debug statements 13 - Port Transmit SEM Debug statements 14 - Bridge Detection SEM Debug statements 15 - All Failure Debug statements 16 - Redundancy code flow Debug statements The remaining bits are unused. Combination of debug levels are also allowed. For example if the bits 0 and 1 are set, then the Debug statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Debug Option to any value will cause the Trace Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.

The version of Spanning Tree Protocol the bridge is currently running. The value stpCompatible(0) indicates the Spanning Tree Protocol specified in IEEE 802.1D and rstp(2) indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and mstp(3) indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s.

The value used by the Port Transmit state machine to limit the maximum transmission rate.

The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard.

The Name for the Regions configuration. By Default Region Name will be equal to the Bridge Mac Address.

Version of the MST Region.

The Configuration Digest value for this Region.

The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event.

The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event.

The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event.

Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context

The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context.

The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context.

The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event.

This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so.

The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.

This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is used for calculating the path cost. In both cases if the user has configured a pathcost for the port that will be used. By default dynamic pathcost calculation is set to false.

This object is used to identity the context-name.

Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.

Entry indicating the Bridge Information.

Spanning Tree Instance to which the information belongs.

MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node

The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.

The Cost of the path to the MSTI Regional Root as seen by this bridge.

The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge.

The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance.

The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.

The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event.

Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge.

The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event.

The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event.

The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.

This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.

A conceptual row containing the status of the MSTP instance.

An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.

The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.

The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values.

A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.

A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values.

A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1.

A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. This object is only instantiated on devices with support for VlanIndex values up to 4095.

A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. This object is only instantiated on devices with support for VlanIndex values up to 4095.

A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. This object is only instantiated on devices with support for VlanIndex values up to 4095.

This table contains Common Spanning Tree Port Information.

A list of information maintained by every port for Common Spanning tree.

The Port number of the port for which this entry contains spanning tree information.

The contribution of this port to the path cost of paths towards the CIST Root which include this port.

The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.

The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.

The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the ports segment.

The Port identifier of the port on the Designated Bridge for this ports segment.

The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.

The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the dot1sCistPortAdminP2P object.

The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.

The operational value of the Edge Port parameter. The object is initialized to the value of dot1sCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU.

= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and it always returns FALSE(2) when read.

Current state of the Port as defined by the Common spanning tree protocol.

Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the ports status in any of the MSTI contexts

Number of times this port has transitioned to the Forwarding State.

Number of MST BPDUs received on this port.

Number of RST BPDUs received on this port.

Number of Configuration BPDUs received on this port.

Number of TCN BPDUs received on this port.

Number of MST BPDUs Transmitted from this port.