ASANTE-AH1012-MIB: View SNMP OID List / Download MIB

VENDOR: ASANTE TECHNOLOGY


 Home MIB: ASANTE-AH1012-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 asante 1.3.6.1.4.1.298
         products 1.3.6.1.4.1.298.1
             snmpAgent 1.3.6.1.4.1.298.1.1
                 agentSw 1.3.6.1.4.1.298.1.1.1
                     agentRunTimeImageMajorVer 1.3.6.1.4.1.298.1.1.1.1 integer read-only
The major software version number of the agent run time image.
                     agentRunTimeImageMinorVer 1.3.6.1.4.1.298.1.1.1.2 integer read-only
The minor software version number of the agent run time image.
                     agentImageLoadMode 1.3.6.1.4.1.298.1.1.1.3 integer read-write
Tells hub whether the software image is to be loaded from the FLASH EPROM or from over the network. Enumeration: 'netBoot': 3, 'other': 1, 'localBoot': 2.
                     agentRemoteBootInfo 1.3.6.1.4.1.298.1.1.1.4 integer read-only
The method for getting boot parameter information. Enumeration: 'eepromBootInfo': 2, 'other': 1.
                     agentRemoteBootProtocol 1.3.6.1.4.1.298.1.1.1.5 integer read-write
The netboot protocol that used to load the agent software. Enumeration: 'bootp-tftp': 2, 'other': 1, 'tftp-only': 3.
                     agentRemoteBootFile 1.3.6.1.4.1.298.1.1.1.6 octet string read-write
The boot file name that is sent to the boot file server by agent boot code during boot time.
                     agentOutBandDialString 1.3.6.1.4.1.298.1.1.1.7 octet string read-write
This is the initialization string used by the Network Management station to establish the out-of-band connection for modem only.
                     agentOutBandBaudRate 1.3.6.1.4.1.298.1.1.1.8 integer read-write
The baud rate setting for the out-of-band port. Enumeration: 'b4800': 4, 'b1200': 2, 'other': 1, 'b2400': 3, 'b9600': 5.
                     agentReset 1.3.6.1.4.1.298.1.1.1.9 integer read-write
The object to allow software to perform 'push_button' system reset. Enumeration: 'reset': 2, 'not-reset': 3, 'other': 1.
                 agentFw 1.3.6.1.4.1.298.1.1.2
                     agentFwMajorVer 1.3.6.1.4.1.298.1.1.2.1 integer read-only
The major firmware version number of the agent prom code.
                     agentFwMinorVer 1.3.6.1.4.1.298.1.1.2.2 integer read-only
The minor firmware version number of the agent prom code.
                 agentHw 1.3.6.1.4.1.298.1.1.3
                     agentHwReVer 1.3.6.1.4.1.298.1.1.3.1 integer read-only
The hardware reversion number of the network management module.
                     agentHwVer 1.3.6.1.4.1.298.1.1.3.2 integer read-only
The hardware model number of the network management module
                 agentNetProtoStkCapMap 1.3.6.1.4.1.298.1.1.4 octet string read-only
This octet string represents the current protocol stack configuration supported by the agent, encoded as a bit string. Each protocol stack is represented by a single bit. When the value of a bit = 1, it indicates that the protocol stack on the agent represented by that bit is supported; when zero, the protocol stack is not supported. The number of octets in the string is always integer multiple of the octet. The first protocol stack will encode in the least significant bit of the first octet. Current, only IP Stack(bit 0) and IPX Stack(bit 1) were defined, all other bits should be zero.
                 agentNetProtocol 1.3.6.1.4.1.298.1.1.5
                     ipagentProtocol 1.3.6.1.4.1.298.1.1.5.1
                         ipagentIpAddr 1.3.6.1.4.1.298.1.1.5.1.1 ipaddress read-write
The ipagent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM.
                         ipagentIpNetMask 1.3.6.1.4.1.298.1.1.5.1.2 ipaddress read-write
The ipagent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM.
                         ipagentDefaultGateway 1.3.6.1.4.1.298.1.1.5.1.3 ipaddress read-write
The ipagent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRouteTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM.
                         ipagentBootServerAddr 1.3.6.1.4.1.298.1.1.5.1.4 ipaddress read-write
The IP address of the boot server that was used for booting this ipagent. This parameter will always be updated in the EEPROM.
                         ipagentUnAuthIP 1.3.6.1.4.1.298.1.1.5.1.5 ipaddress read-only
The IP address of the last station that tried to access this ipagent with an invalid community string.
                         ipagentUnAuthComm 1.3.6.1.4.1.298.1.1.5.1.6 octet string read-only
The community string of the last station that tried to access this ipagent with an invalid community string.
                     ipagentTrapRcvrTable 1.3.6.1.4.1.298.1.1.5.2 no-access
Table consisting of the list of Network Management Stations that are to receive traps generated by this agent.
                         ipagentTrapRcvrEntry 1.3.6.1.4.1.298.1.1.5.2.1 no-access
Destination IP address and community string for a particular trap server.
                             ipagentTrapRcvrIpAddr 1.3.6.1.4.1.298.1.1.5.2.1.1 ipaddress read-only
IP address for trap server receiving trap.
                             ipagentTrapRcvrStatus 1.3.6.1.4.1.298.1.1.5.2.1.2 integer read-write
Validation of individual trap receiver. If value of this object is set to invalid(3), then that particular entry is deemed invalid, meaning that the address for that entry is no longer valid because the entry has been removed from the table. Enumeration: 'other': 1, 'valid': 2, 'invalid': 3.
                             ipagentTrapRcvrComm 1.3.6.1.4.1.298.1.1.5.2.1.3 octet string read-write
Community string for traps sent to this trap receiver.
             adaptCard 1.3.6.1.4.1.298.1.2
             concentrator 1.3.6.1.4.1.298.1.3
                 concChassis 1.3.6.1.4.1.298.1.3.1
                     concBasicGrp 1.3.6.1.4.1.298.1.3.1.1
                         concChassisType 1.3.6.1.4.1.298.1.3.1.1.1 integer read-only
The concentrator's chassis type. Enumeration: 'other': 1, 'aH1012': 2.
                         concChassisBkplType 1.3.6.1.4.1.298.1.3.1.1.2 integer read-only
The concentrator's chassis backplane type. Enumeration: 'no-backplane': 2, 'other': 1.
                         concChassisBkplRev 1.3.6.1.4.1.298.1.3.1.1.3 integer read-only
The concentrator's chassis backplane revision number.
                         concChassisPsTable 1.3.6.1.4.1.298.1.3.1.1.4 no-access
This table contains concentrator's power supply information.
                             concChassisPsEntry 1.3.6.1.4.1.298.1.3.1.1.4.1 no-access
The entry in the table containing the information about a single power supply.
                                 concChassisPsIndex 1.3.6.1.4.1.298.1.3.1.1.4.1.1 integer read-only
The value of this object identifies the power supply table for which this entry contains power supply type and status.
                                 concChassisPsModuleType 1.3.6.1.4.1.298.1.3.1.1.4.1.2 integer read-only
The value of this object identifies the power supply module type. Enumeration: 'other': 1.
                                 concChassisPsStatus 1.3.6.1.4.1.298.1.3.1.1.4.1.3 integer read-only
The value of this object identifies the power supply module status. Enumeration: 'good': 2, 'other': 1, 'bad': 3.
                         concChassisFanStatus 1.3.6.1.4.1.298.1.3.1.1.5 integer read-only
The value of this object identifies the fan status. Enumeration: 'good': 3, 'other': 1, 'bad': 4, 'no-fan': 2.
                         concChassisGroupCapacity 1.3.6.1.4.1.298.1.3.1.1.6 integer read-only
The number of groups that can be contained within the concentrator.
                         concChassisGroupMap 1.3.6.1.4.1.298.1.3.1.1.7 octet string read-only
This octet string represents the current configuration of groups, encoded as a bit string, each group is represented by a single bit.
                         concChassisGrpTable 1.3.6.1.4.1.298.1.3.1.1.8 no-access
A table that contains information about the group/slot in this chassis.
                             concChassisGrpEntry 1.3.6.1.4.1.298.1.3.1.1.8.1 no-access
A list of information for each slot in this chassis.
                                 concChassisGrpIndex 1.3.6.1.4.1.298.1.3.1.1.8.1.1 integer read-only
The value of this object identifies the chassis group table for which this entry contains group related information.
                                 concChassisGrpNumberPort 1.3.6.1.4.1.298.1.3.1.1.8.1.2 integer read-only
The number of port is available for up/down link within this group.
                                 concChassisGrpType 1.3.6.1.4.1.298.1.3.1.1.8.1.3 integer read-only
The value represents the function of this group.
                                 concChassisGrpDescr 1.3.6.1.4.1.298.1.3.1.1.8.1.4 displaystring read-only
A description of this group device.
                                 concChassisGrpHwRev 1.3.6.1.4.1.298.1.3.1.1.8.1.5 integer read-only
The hardware revision number of this particular group.
                 concConfiguration 1.3.6.1.4.1.298.1.3.2
                     eSmartHubConfig 1.3.6.1.4.1.298.1.3.2.1
                         eSmartHubId 1.3.6.1.4.1.298.1.3.2.1.1 physaddress read-only
Hub MAC address (octet string) found from prom chip in hub.
                         eSmartHubAssignedId 1.3.6.1.4.1.298.1.3.2.1.2 integer read-only
Assigned hub ID for Out-of-Band.
                         eSmartHubTerSwitch 1.3.6.1.4.1.298.1.3.2.1.3 integer read-only
Status of position of PC/terminal switch located on rear panel of hub. Switches between serial and parallel communications for modem/PC or terminal connection to RS-232 Port. Up (off) for PC, down (on) for terminal. If position of switch is changed, there will be no change in this status until hub is reset. Enumeration: 'terminal': 2, 'pc-modem': 3, 'other': 1.
                         eSmartHubHwLoadPatStatus 1.3.6.1.4.1.298.1.3.2.1.4 integer read-write
Which logic configuration pattern is loaded into the Programmable Logic Device PLD.
                         eSmartHubHwLoadPatCapacity 1.3.6.1.4.1.298.1.3.2.1.5 octet string read-only
What kind of function the PLD can perform.
                         eSmartHubNodeAgeTimer 1.3.6.1.4.1.298.1.3.2.1.6 integer read-write
How long to keep node entry in node summary table, measured in sec. The maximum is 11 hours.
                         eSmartHub3in1LnConStatus 1.3.6.1.4.1.298.1.3.2.1.7 integer read-only
Status of 3In1 Uplink which is located on rear panel of hub. Describes the physical link type or types currently connected. Enumeration: 'aUI': 3, 'uTP': 2, 'other': 1, 'uTP-and-AUI': 4.
                         eSmartHub3in1StateCtrl 1.3.6.1.4.1.298.1.3.2.1.8 integer read-write
Whether using Auto-sense or manually selected a particular media type for the uplink connection. If using Auto-sense it first tries AUI. If AUI is not present then 10T. If neither AUI nor 10T is present, then it defaults to BNC. Enumeration: 'bNC': 3, 'aUI': 4, 'uTP': 2, 'other': 1, 'auto': 5.
                 concStatistics 1.3.6.1.4.1.298.1.3.3
                     eStatistics 1.3.6.1.4.1.298.1.3.3.1
                         eGlobalStatistics 1.3.6.1.4.1.298.1.3.3.1.1
                             eGlobalHubReadableFrames 1.3.6.1.4.1.298.1.3.3.1.1.1 counter read-only
Global counter of good or readable frames for this hub. Frame is between 64 and 1518 bytes in length and has SFD and good FCS.
                             eGlobalHubMcastFrames 1.3.6.1.4.1.298.1.3.3.1.1.2 counter read-only
Global counter of number of multicast frames for this hub. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included.
                             eGlobalHubBcastFrames 1.3.6.1.4.1.298.1.3.3.1.1.3 counter read-only
Global counter of number of broadcast frames for his hub. All 1s in network destination address. Multicast packets are not included.
                             eGlobalHubFrameTooLongs 1.3.6.1.4.1.298.1.3.3.1.1.4 counter read-only
Global counter, for this hub, of data frames longer than 1518 bytes, with a SFD and good FCS.
                             eGlobalHubRunts 1.3.6.1.4.1.298.1.3.3.1.1.5 counter read-only
Global counter, for this hub, of data frames with size less than 64 bytes, with no CRC or alignment errors.
                             eGlobalHubAlignmentErrors 1.3.6.1.4.1.298.1.3.3.1.1.6 counter read-only
Global counter, for this hub, of frames which are not integer multiples of 1 byte.
                             eGlobalHubFragmentErrors 1.3.6.1.4.1.298.1.3.3.1.1.7 counter read-only
Global counter, for this hub, of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error).
                             eGlobalHubFCSErrors 1.3.6.1.4.1.298.1.3.3.1.1.8 counter read-only
Global counter, for this hub, of frames that failed Cyclic Redundancy Check (CRC).
                             eGlobalHubIFGErrors 1.3.6.1.4.1.298.1.3.3.1.1.9 counter read-only
Global counter, for this hub, of occurrences of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds.
                             eGlobalHubDataRateMismatchs 1.3.6.1.4.1.298.1.3.3.1.1.10 counter read-only
Global counter, for this hub, of errors where incoming data rate is not with in the tolerance level of 10MHZ + or - 0.01%.
                             eGlobalHubShortEvents 1.3.6.1.4.1.298.1.3.3.1.1.11 counter read-only
Global counter, for this hub, of data burst where data is less than 10 bytes in length, with no SFD.
                             eGlobalHubCollisions 1.3.6.1.4.1.298.1.3.3.1.1.12 counter read-only
Global counter of collision flags, for this hub.
                             eGlobalHubLateCollisions 1.3.6.1.4.1.298.1.3.3.1.1.13 counter read-only
Global counter, for this hub, of collisions occurring after the 64 byte collision window.
                             eGlobalHubMJLPs 1.3.6.1.4.1.298.1.3.3.1.1.14 counter read-only
Global counter of MAU jabber lockup protection where hub repeater chip goes into lockup state.
                             eGlobalHubAutoPartitions 1.3.6.1.4.1.298.1.3.3.1.1.15 counter read-only
Global counter, for this hub, of all ports including 3in1 port being partitioned from network in response to 31 or more continuous collisions.
                             eGlobalHubSFDMissings 1.3.6.1.4.1.298.1.3.3.1.1.16 counter read-only
Global counter, for this hub, of a burst of data greater than or equal to 10 bytes in length with no SFD.
                             eGlobalHubBadFrames 1.3.6.1.4.1.298.1.3.3.1.1.17 counter read-only
Global counter, for this hub, of total errored frame including toolong, runts, misaligned, or bad FCS.
                         eGrpStatisticsTable 1.3.6.1.4.1.298.1.3.3.1.3 no-access
Table of statistical information for each group.
                             eGrpStatisticsEntry 1.3.6.1.4.1.298.1.3.3.1.3.1 no-access
Entry for individual group in table.
                                 eGrpStatIndex 1.3.6.1.4.1.298.1.3.3.1.3.1.1 integer read-only
The value of this object identifies the group for which this entry contains group statistical information.
                                 eGrpStatReadableFrames 1.3.6.1.4.1.298.1.3.3.1.3.1.2 counter read-only
Group counter of 'good' or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS.
                                 eGrpStatMcastFrames 1.3.6.1.4.1.298.1.3.3.1.3.1.3 counter read-only
Group counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included.
                                 eGrpStatBcastFrames 1.3.6.1.4.1.298.1.3.3.1.3.1.4 counter read-only
Group counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included.
                                 eGrpStatFrameTooLongs 1.3.6.1.4.1.298.1.3.3.1.3.1.5 counter read-only
Group counter for data frames longer than 1518 bytes, with a SFD and good FCS.
                                 eGrpStatRunts 1.3.6.1.4.1.298.1.3.3.1.3.1.6 counter read-only
Group counter for data frames with size less than 64 bytes, with no CRC or alignment errors.
                                 eGrpStatAlignmentErrors 1.3.6.1.4.1.298.1.3.3.1.3.1.7 counter read-only
Group counter of frames which are not integer multiples of 1 byte .
                                 eGrpStatFragmentErrors 1.3.6.1.4.1.298.1.3.3.1.3.1.8 counter read-only
Group counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error).
                                 eGrpStatFCSErrors 1.3.6.1.4.1.298.1.3.3.1.3.1.9 counter read-only
Group counter frames that failed Cyclic Redundancy Check (CRC).
                                 eGrpStatIFGErrors 1.3.6.1.4.1.298.1.3.3.1.3.1.10 counter read-only
Group counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds.
                                 eGrpStatDataRateMismatchs 1.3.6.1.4.1.298.1.3.3.1.3.1.11 counter read-only
Group counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%.
                                 eGrpStatShortEvents 1.3.6.1.4.1.298.1.3.3.1.3.1.12 counter read-only
Group counter of data burst where data is less than 10 bytes in length, with no SFD.
                                 eGrpStatCollisions 1.3.6.1.4.1.298.1.3.3.1.3.1.13 counter read-only
Group counter of collision flags.
                                 eGrpStatLateCollisions 1.3.6.1.4.1.298.1.3.3.1.3.1.14 counter read-only
Group counter of collisions occurring after the 64 byte collision window.
                                 eGrpStatMJLPs 1.3.6.1.4.1.298.1.3.3.1.3.1.15 counter read-only
Group counter of MAU jabber lockup protection where hub repeater chip goes into lockup state.
                                 eGrpStatAutoPartitions 1.3.6.1.4.1.298.1.3.3.1.3.1.16 counter read-only
Group counter of ports in group autopartitioned in response to 31 or more continuous collisions.
                                 eGrpStatSFDMissings 1.3.6.1.4.1.298.1.3.3.1.3.1.17 counter read-only
Group counter of a burst of data greater than or equal to 10 bytes in length with no SFD.
                                 eGrpStatBadFrames 1.3.6.1.4.1.298.1.3.3.1.3.1.18 counter read-only
Group counter of total errored frames including toolong, runts, misaligned, or bad FCS.
                         ePortStatisticsTable 1.3.6.1.4.1.298.1.3.3.1.4 no-access
Table for port specific network statistics.
                             ePortStatisticsEntry 1.3.6.1.4.1.298.1.3.3.1.4.1 no-access
Entry for individual port in table.
                                 ePortGrpIndex 1.3.6.1.4.1.298.1.3.3.1.4.1.1 integer read-only
The value of this object identifies the group for which this entry contains port statistical information.
                                 ePortIndex 1.3.6.1.4.1.298.1.3.3.1.4.1.2 integer read-only
The value of this object identifies the port for which this entry contains port statistical information.
                                 ePortStatReadableFrames 1.3.6.1.4.1.298.1.3.3.1.4.1.3 counter read-only
Port counter of good or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS.
                                 ePortStatMcastFrames 1.3.6.1.4.1.298.1.3.3.1.4.1.4 counter read-only
Port counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included.
                                 ePortStatBcastFrames 1.3.6.1.4.1.298.1.3.3.1.4.1.5 counter read-only
Port counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included.
                                 ePortStatFrameTooLongs 1.3.6.1.4.1.298.1.3.3.1.4.1.6 counter read-only
Port counter for data frames longer than 1518 bytes, with a SFD and good FCS.
                                 ePortStatRunts 1.3.6.1.4.1.298.1.3.3.1.4.1.7 counter read-only
Port counter for data frames with size less than 64 bytes, with no CRC or alignment errors.
                                 ePortStatAlignmentErrors 1.3.6.1.4.1.298.1.3.3.1.4.1.8 counter read-only
Port counter of frames which are not integer multiples of 1 byte.
                                 ePortStatFragmentErrors 1.3.6.1.4.1.298.1.3.3.1.4.1.9 counter read-only
Port counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error).
                                 ePortStatFCSErrors 1.3.6.1.4.1.298.1.3.3.1.4.1.10 counter read-only
Port counter of frames that failed Cyclic Redundancy Check (CRC).
                                 ePortStatIFGErrors 1.3.6.1.4.1.298.1.3.3.1.4.1.11 counter read-only
Port counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds.
                                 ePortStatDataRateMismatchs 1.3.6.1.4.1.298.1.3.3.1.4.1.12 counter read-only
Port counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%.
                                 ePortStatShortEvents 1.3.6.1.4.1.298.1.3.3.1.4.1.13 counter read-only
Port counter of data burst where data is less than 10 bytes in length, with no SFD.
                                 ePortStatCollisions 1.3.6.1.4.1.298.1.3.3.1.4.1.14 counter read-only
Port counter of collision flags.
                                 ePortStatLateCollisions 1.3.6.1.4.1.298.1.3.3.1.4.1.15 counter read-only
Port counter of collisions occurring after the 64 byte collision window.
                                 ePortStatMJLPs 1.3.6.1.4.1.298.1.3.3.1.4.1.16 counter read-only
Port counter of MAU jabber lockup protection where hub repeater chip goes into lockup state.
                                 ePortStatAutoPartitions 1.3.6.1.4.1.298.1.3.3.1.4.1.17 counter read-only
Port counter of number of times port was autopartitioned in response to 31 or more continuous collisions.
                                 ePortStatSFDMissings 1.3.6.1.4.1.298.1.3.3.1.4.1.18 counter read-only
Port counter of a burst of data greater than or equal to 10 bytes in length with no SFD.
                                 ePortStatBadFrames 1.3.6.1.4.1.298.1.3.3.1.4.1.19 counter read-only
Port counter of total errored frames including toolong, runts, misaligned, or bad FCS.
                         eTrafficMatrixTable 1.3.6.1.4.1.298.1.3.3.1.5 no-access
Table to analyze the number of packets received through network traffic by the size of each packet.
                             eTrafficMatrixEntry 1.3.6.1.4.1.298.1.3.3.1.5.1 no-access
Individual entry in matrix of packet lengths table.
                                 eTrafficMatrixLength 1.3.6.1.4.1.298.1.3.3.1.5.1.1 integer read-only
Starting length for each range in table.
                                 eTrafficMatrixRange 1.3.6.1.4.1.298.1.3.3.1.5.1.2 integer read-only
Range of packet sizes to be scanned for in network traffic. Enumeration: 'from-1024-to-1518-bytes': 8, 'from-512-to-767-bytes': 6, 'from-1-to-63-bytes': 2, 'from-65-to-511-bytes': 10, 'over-1518-bytes': 12, 'from-512-to-1023-bytes': 9, 'exact-64-bytes': 11, 'from-64-to-127-bytes': 3, 'other': 1, 'from-768-to-1023-bytes': 7, 'from-128-to-255-bytes': 4, 'from-256-to-511-bytes': 5.
                                 eTrafficMatrixFramesCounts 1.3.6.1.4.1.298.1.3.3.1.5.1.3 counter read-only
Counter for number of frames received for particular range specified by the MatrixRange.
                         eSpecific 1.3.6.1.4.1.298.1.3.3.1.6
                             eSmartHubSpec 1.3.6.1.4.1.298.1.3.3.1.6.1
                                 eColGraphBar 1.3.6.1.4.1.298.1.3.3.1.6.1.1 integer read-only
Information on hardware LED collision graph bar.
                                 eUtilGraphBar 1.3.6.1.4.1.298.1.3.3.1.6.1.2 integer read-only
Information on hardware LED for utilization graph bar.
                                 ePortRateTable 1.3.6.1.4.1.298.1.3.3.1.6.1.6 no-access
Network statistics for individual ports measured in Rate/Second.
                                     ePortRateEntry 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1 no-access
Individual entry in port rate table.
                                         ePortRateGrpIndex 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.1 integer read-only
The value of this object identifies the group for which this entry contains port statistical information.
                                         ePortRatePortIndex 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.2 integer read-only
This value identifies the port for which this entry contains port statistical information.
                                         ePortRateReadableFrames 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.3 integer read-only
Rate of occurrence of good or readable frames.
                                         ePortRateMcastFrames 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.4 integer read-only
Rate of occurrence of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included.
                                         ePortRateBcastFrames 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.5 integer read-only
Rate of occurrence of number of broadcast frames. All 1s in network destination address. Multicast packets are not included.
                                         ePortRateFrameTooLongs 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.6 integer read-only
Rate of occurrence of data frames longer than 1518 bytes, with a SFD and good FCS.
                                         ePortRateRunts 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.7 integer read-only
Rate of occurrence of data frames with size less than 64 bytes, with no CRC or alignment errors.
                                         ePortRateAlignmentErrors 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.8 integer read-only
Rate of occurrence of frames which are not integer multiples of 1 byte.
                                         ePortRateFragmentErrors 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.9 integer read-only
Rate of occurrence of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error).
                                         ePortRateFCSErrors 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.10 integer read-only
Rate of occurrence of frames that failed Cyclic Redundancy Check (CRC).
                                         ePortRateIFGErrors 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.11 integer read-only
Rate of occurrence of interframe Gap Errors where time period between data frames is less than 5.5 micro seconds.
                                         ePortRateDataRateMismatch 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.12 integer read-only
Rate of occurrence of errors where incoming data rate is not with in the tolerance level of 10 MHz + or - 0.01%.
                                         ePortRateShortEvents 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.13 integer read-only
Rate of occurrence of data burst where data is less than 10 bytes in length, with no SFD.
                                         ePortRateCollisions 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.14 integer read-only
Rate of occurrence of collision flags.
                                         ePortRateLateCollisions 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.15 integer read-only
Rate of occurrence of collisions occurring after the 64 byte collision window.
                                         ePortRateMJLPs 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.16 integer read-only
Rate of occurrence of MAU jabber lockup protection where hub repeater chip goes into lockup state.
                                         ePortRateAutoPartitions 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.17 integer read-only
Rate of occurrence of times port was autopartitioned in response to 31 or more continuous collisions.
                                         ePortRateSFDMissings 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.18 integer read-only
Rate of occurrence of a burst of data greater than or equal to 10 bytes in length with no SFD.
                                         ePortRateBadFrames 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.19 integer read-only
Rate of occurrence of total errored frames including toolong, runts, misaligned, or bad FCS.
                 concStateCtrl 1.3.6.1.4.1.298.1.3.4
                     eStateCtrl 1.3.6.1.4.1.298.1.3.4.1
                         ePortStateCtrlTable 1.3.6.1.4.1.298.1.3.4.1.1 no-access
Table for port control parameters.
                             ePortStateCtrlEntry 1.3.6.1.4.1.298.1.3.4.1.1.1 no-access
Individual entry of port control in table.
                                 ePortStateGrpIndex 1.3.6.1.4.1.298.1.3.4.1.1.1.1 integer read-only
The value of this object identifies the group for which this entry contains port control information.
                                 ePortStatePortIndex 1.3.6.1.4.1.298.1.3.4.1.1.1.2 integer read-only
This value identifies the port for which this entry contains port control information.
                                 ePortStateType 1.3.6.1.4.1.298.1.3.4.1.1.1.3 integer read-only
Type of cabling physically connected to port. Enumeration: 'aUI': 3, 'rJ45': 4, 'foil': 5, 'other': 1, 'bNC': 2, 'three-in-one': 6.
                                 ePortStateLinkStatus 1.3.6.1.4.1.298.1.3.4.1.1.1.4 integer read-only
Link status for particular port. On=physical link if link test enabled. Off=no physical link exists or link test is disabled. Enumeration: 'linkoff': 3, 'linkon': 2, 'others': 1.
                                 ePortStateLinkIntegTest 1.3.6.1.4.1.298.1.3.4.1.1.1.5 integer read-write
Set can enable or disabled link integrity test. Get will say if link integrity test is enabled (2) or disabled (3). Enumeration: 'linkTestEnable': 2, 'linkTestDisable': 3, 'others': 1.
                                 ePortStateAutoPartStatus 1.3.6.1.4.1.298.1.3.4.1.1.1.6 integer read-only
Whether port has been autopartitioned (2) or not autopartitioned (3). Enumeration: 'autopartitioned': 2, 'notautopartitioned': 3, 'others': 1.
                                 ePortStateJabberStatus 1.3.6.1.4.1.298.1.3.4.1.1.1.7 integer read-only
Jabber detection for port. If On(2), then jabber occurred on this port. Off(3), then no jabber occurred or jabber detection has been manually disabled. Enumeration: 'on': 2, 'off': 3, 'others': 1.
                                 ePortStateJabberState 1.3.6.1.4.1.298.1.3.4.1.1.1.8 integer read-write
Set can enable or disable jabber detection test. Get will say if jabber detection test is enabled (2) or disabled (3). Enumeration: 'disabled': 3, 'enabled': 2, 'others': 1.
                                 ePortStateAdminState 1.3.6.1.4.1.298.1.3.4.1.1.1.9 integer read-write
Set will manually enable or disable any port. Get will say if port has been enabled (2) or disabled (3). Enumeration: 'disabled': 3, 'enabled': 2, 'others': 1.
                                 ePortStateRDTState 1.3.6.1.4.1.298.1.3.4.1.1.1.10 integer read-write
Whether RecvThreshold has been enabled or disabled. Can use this to lower noise threshold (tolerance) so that longer twisted pair links can be used. Enumeration: 'unreduce': 2, 'reduce': 3, 'others': 1.
                                 ePortStatePolarityStatus 1.3.6.1.4.1.298.1.3.4.1.1.1.11 integer read-only
Polarity is correct (2) or not for this port. Enumeration: 'reversed': 3, 'normal': 2, 'others': 1.
                                 ePortStatePolarityState 1.3.6.1.4.1.298.1.3.4.1.1.1.12 integer read-write
Autopolarity correction enabled or disabled. Allows hub to make electrical corrections automatically if cable does not reverse polarity within wire pairs. If do not want this correction to take place, autocorrection can be disabled. Enumeration: 'disabled': 3, 'enabled': 2, 'others': 1.
                 concNodeMgt 1.3.6.1.4.1.298.1.3.5
                     nodeSummaryTable 1.3.6.1.4.1.298.1.3.5.1 no-access
Node summary of all traffic through hub.
                         nodeSummaryEntry 1.3.6.1.4.1.298.1.3.5.1.1 no-access
Individual entry in node summary table.
                             nodeSummaryGrpIndex 1.3.6.1.4.1.298.1.3.5.1.1.1 integer read-only
Group Id for identifying the group where node activity is detected.
                             nodeSummaryPortIndex 1.3.6.1.4.1.298.1.3.5.1.1.2 integer read-only
Port Id for identifying the port where node activity is detected.
                             nodeSummarySrcMacAddr 1.3.6.1.4.1.298.1.3.5.1.1.3 physaddress read-only
The source MAC address of the node that is transmitting frames received by this port.
                             nodeSummaryDestMacAddr 1.3.6.1.4.1.298.1.3.5.1.1.4 physaddress read-only
The destination MAC address of the node to which frames are being received by this port.
                             nodeSummaryEtherType 1.3.6.1.4.1.298.1.3.5.1.1.5 integer read-only
The 2 bytes after the source (src) address in packet.
                             nodeSummaryIpAddrPair 1.3.6.1.4.1.298.1.3.5.1.1.6 octet string read-only
Destination and source IP address if packet is an Ethernet IP packet. It the packet is not an Ethernet IP packet, then the information may not be accurate.
                             nodeSummaryTimeStamp 1.3.6.1.4.1.298.1.3.5.1.1.7 timeticks read-only
nodeSummary entry time stamp (in hundredths of a second) since the network management portion of the system was last re-initialized.
                     nodeSecurity 1.3.6.1.4.1.298.1.3.5.2
                         nodeSecuLev1Table 1.3.6.1.4.1.298.1.3.5.2.1 no-access
Table of nodes which have access to particular ports. Nodes are identified by MAC address.
                             nodeSecuLev1Entry 1.3.6.1.4.1.298.1.3.5.2.1.1 no-access
Individual entry for node security table.
                                 nodeSecuLev1GrpIndex 1.3.6.1.4.1.298.1.3.5.2.1.1.1 integer read-only
Group ID for port which verifying node access.
                                 nodeSecuLev1PortIndex 1.3.6.1.4.1.298.1.3.5.2.1.1.2 integer read-only
Specific port for which verifying node access.
                                 nodeSecuLev1Status 1.3.6.1.4.1.298.1.3.5.2.1.1.3 integer read-write
Address is valid or invalid. Enumeration: 'other': 1, 'valid': 2, 'invalid': 3.
                                 nodeSecuLev1AllowedAddr 1.3.6.1.4.1.298.1.3.5.2.1.1.4 physaddress read-write
MAC address of nodes allowed for particular port.
                                 nodeSecuLev1Action 1.3.6.1.4.1.298.1.3.5.2.1.1.5 integer read-write
Set action for node intrusion violation. Enumeration: 'send-trap': 3, 'partition-port': 2, 'partition-port-and-send-trap': 4, 'send-trap-and-request-page': 5, 'other': 1, 'partition-port-and-send-trap-and-request-page': 6.
                 concAlarmMgt 1.3.6.1.4.1.298.1.3.6
                     thresholdAlarm 1.3.6.1.4.1.298.1.3.6.1
                         thresholdLev1Table 1.3.6.1.4.1.298.1.3.6.1.1 no-access
Threshold/trap table.
                             thresholdLev1Entry 1.3.6.1.4.1.298.1.3.6.1.1.1 no-access
Individual entry in threshold trap table.
                                 thresholdLev1Index 1.3.6.1.4.1.298.1.3.6.1.1.1.1 integer read-only
An index that uniquely identifies an entry in the alarm table.
                                 thresholdLev1Status 1.3.6.1.4.1.298.1.3.6.1.1.1.2 integer read-write
Status of entry in threshold/trap table. Enumeration: 'other': 1, 'valid': 2, 'invalid': 3.
                                 thresholdLev1Target 1.3.6.1.4.1.298.1.3.6.1.1.1.3 integer read-write
Set target for threshold definition. Either whole hub(2) or particular port (3). Enumeration: 'other': 1, 'port': 3, 'hub': 2.
                                 thresholdLev1GroupIndex 1.3.6.1.4.1.298.1.3.6.1.1.1.4 integer read-write
Group ID for trap set. One note--if the target is selected as hub, the group index will be ignored.
                                 thresholdLev1PortIndex 1.3.6.1.4.1.298.1.3.6.1.1.1.5 integer read-write
Port number for trap set. One note--if the target is selected as hub, the port index will be ignored.
                                 thresholdLev1Subject 1.3.6.1.4.1.298.1.3.6.1.1.1.6 integer read-write
Variable checking for in trap. These are the type of frames that a trap will be verified against. Enumeration: 'data-rate-mismatch': 11, 'bcast-frames': 4, 'fragment-errors': 8, 'readable-frames': 2, 'auto-partitions': 15, 'late-collisions': 14, 'mcast-frames': 3, 'alignment-errors': 7, 'fCS-errors': 9, 'sfd-missing': 16, 'collisions': 13, 'bad-frames': 17, 'other': 1, 'runts': 6, 'frame-too-longs': 5, 'short-events': 12, 'iFG-errors': 10.
                                 thresholdLev1SampleType 1.3.6.1.4.1.298.1.3.6.1.1.1.7 integer read-write
The method of sampling the selected variable and calculating the value to be compared against the threshold. Enumeration: 'event-per-second': 2, 'other': 1.
                                 thresholdLev1StartupAlarm 1.3.6.1.4.1.298.1.3.6.1.1.1.8 integer read-write
When the trap is triggered in relation to value set. When goes above (2), below (3), or changes at all from (4). Enumeration: 'falling': 3, 'other': 1, 'rising': 2, 'rising-or-falling': 4.
                                 thresholdLev1WaterMark 1.3.6.1.4.1.298.1.3.6.1.1.1.9 integer read-write
Counter of threshold.
                                 thresholdLev1DetectedValue 1.3.6.1.4.1.298.1.3.6.1.1.1.10 integer read-only
The value of the statistic for the last sampling period.
                                 thresholdLev1RisingEvent 1.3.6.1.4.1.298.1.3.6.1.1.1.11 integer read-write
How to respond to a triggered event for a rising event. Enumeration: 'send-trap': 3, 'partition-port': 2, 'partition-port-and-send-trap': 4, 'send-trap-and-request-page': 5, 'other': 1, 'partition-port-and-send-trap-and-request-page': 6.
                                 thresholdLev1FallingEvent 1.3.6.1.4.1.298.1.3.6.1.1.1.12 integer read-write
How to respond to a triggered event for a falling event. Enumeration: 'send-trap': 3, 'partition-port': 2, 'partition-port-and-send-trap': 4, 'send-trap-and-request-page': 5, 'other': 1, 'partition-port-and-send-trap-and-request-page': 6.
                                 thresholdLev1Interval 1.3.6.1.4.1.298.1.3.6.1.1.1.13 integer read-write
The interval in seconds over which the data is sampled.
                                 thresholdLev1OwnerString 1.3.6.1.4.1.298.1.3.6.1.1.1.14 octet string read-write
8-byte octet reserved for the owner who defined this entry.
         productId 1.3.6.1.4.1.298.2
             adapterProductId 1.3.6.1.4.1.298.2.1
             concProductId 1.3.6.1.4.1.298.2.2
                 hub1012 1.3.6.1.4.1.298.2.2.1
                 hub1012_bridge 1.3.6.1.4.1.298.2.2.2
                       thresholdLev1 1.3.6.1.4.1.298.2.2.10.1
The SNMP trap that is generated when an alarm entry crosses its rising threshold or falling threshold, and generates an event that is configured for sending SNMP traps.
                       nodeSecuLevel1 1.3.6.1.4.1.298.2.2.10.2
The SNMP trap that is generated when the MAC layer address of the incoming frame from a particular port does not match the pre-assigned address with that port, and generates an event that is configured for sending SNMP traps.