ARTEM-COMPOINT-BLD-MIB: View SNMP OID List / Download MIB

VENDOR: ARTEM GMBHMICHAEL MARSANU/CATRINEL CATRINESCU


 Home MIB: ARTEM-COMPOINT-BLD-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 artem 1.3.6.1.4.1.4280
Funkwerk Enterprise Communications MIB file that provides additional attributes not covered by standard MIBs for Broken Link Detection in artem products.
           artemBLD 1.3.6.1.4.1.4280.6
Definitions and attributes for Broken Link Detection.
               artemBLDAdminStatus 1.3.6.1.4.1.4280.6.1 truthvalue read-write
This attribute selects whether periodic BLD link checking is administratively enabled.
               artemBLDLinkState 1.3.6.1.4.1.4280.6.2 truthvalue read-only
This attribute indicates whether the IP target monitored by BLD is currently reachable.
               artemBLDTargetAddress 1.3.6.1.4.1.4280.6.3 ipaddress read-write
This attribute holds the IP address of the connection target which is periodically checked by BLD.
               artemBLDTargetIf 1.3.6.1.4.1.4280.6.4 integer read-only
This attribute hold the ifIndex of the interface that received the most recent reply from the BLD target. The value 0 indicates that no reply has been received.
               artemBLDCheckInterval 1.3.6.1.4.1.4280.6.5 integer read-write
This is the interval between successive checks whether the BLD target is reachable.
               artemBLDTimeout 1.3.6.1.4.1.4280.6.6 integer read-write
This attribute defines the timeout for replies from the BLD target.
               artemBLDRetries 1.3.6.1.4.1.4280.6.7 integer read-write
This attribute defines the number of timer BLD retries to reach the target after an initial failed attempt until the connection is considered broken.
               artemBLDIfTable 1.3.6.1.4.1.4280.6.8 no-access
This is table of all interfaces which will be modified when BLD detects that its target is unreachable. AP type interfaces are temporarily closed and will not allow any client to associate. Bridge type interfaces are unlocked if their operational status is disabled(2).
                   artemBLDIfEntry 1.3.6.1.4.1.4280.6.8.1 no-access
An entry in artemBLDIfTable.
                       artemBLDIfRowStatus 1.3.6.1.4.1.4280.6.8.1.1 rowstatus read-only
Auxiliary variable for creation of new object instances and/or the deletion of existing object instances.
               artemBLDNotification 1.3.6.1.4.1.4280.6.9
                   artemBLDConnection 1.3.6.1.4.1.4280.6.9.1
This notification is triggered for every interface in artemBLDIfTable whenever BLD detects a change in target link state.
               artemBLDGroup 1.3.6.1.4.1.4280.6.10
Attributes for artem Broken Link Detection (BLD).
               artemBLDNotificationGroup 1.3.6.1.4.1.4280.6.11
Notifications for BLD events