ALCATEL-IND1-SAA-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-SAA-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1SaaMIB 1.3.6.1.4.1.6486.801.1.2.1.56.1
This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Service Assurance agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1SaaNotifications 1.3.6.1.4.1.6486.801.1.2.1.56.1.0
Branch for Saa Notifications.
         alaSaaIPIterationCompleteTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.1
A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed.
         alaSaaEthIterationCompleteTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.2
A alaSaaEthIterationCompleteTrap notification is sent when a Eth-LB or Eth-DMM SAA iteration is completed.
         alaSaaMacIterationCompleteTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.3
A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed.
         alaSaaPacketLossTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.4
A alaSaaPacketLossTrap notification is sent when a packet is lost during a test.
         alaSaaJitterThresholdYellowTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.5
A alaSaaJitterThresholdTrap notification is sent when 90% of the Jitter Threshold is crossed.
         alaSaaRTTThresholdYellowTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.6
A alaSaaRTTThresholdYellowTrap notification is sent when 90% of the RTT Threshold is crossed.
         alaSaaJitterThresholdRedTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.7
A alaSaaJitterThresholdTrap notification is sent when the Jitter Threshold is crossed.
         alaSaaRTTThresholdRedTrap 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.8
A alaSaaRTTThresholdRedTrap notification is sent when the RTT Threshold is crossed.
     alcatelIND1SaaMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.56.1.1
Branch For Saa Objects.
         alaSaaCtrlConfig 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1
             alaSaaCtrlTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1 no-access
Defines the SAA control table for providing, via SNMP, the capability of performing SAA test operations.
                 alaSaaCtrlEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1 no-access
An entry in the alaSaaCtrlTable table, containing information on the Saa function for a single instance of the Saa.
                     alaSaaCtrlOwnerIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.1 snmpadminstring no-access
Owner name to identify the responsiblity of the entries in the table.
                     alaSaaCtrlTestIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.2 snmpadminstring no-access
Unique name to identify the entries in the table. The name is unique across various SNMP users.
                     alaSaaCtrlRowStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.3 rowstatus read-only
This object allows entries to be created and deleted in the table.
                     alaSaaCtrlDescr 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.4 displaystring read-only
User provided description string for the SAA.
                     alaSaaCtrlAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.5 integer read-only
Indicates wether to start or stop the SAA test. Enumeration: 'start': 0, 'stop': 1.
                     alaSaaCtrlTestMode 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.6 integer read-only
The type of SAA test to be performed. The undefined value corresponds to the case when an entry is created in the alaSaaCtrlTable table without specifying a value for this object. This value shall be updated when the user creates an entry for the corresponding saa in the alaSaaIpCtrlTable table, alaSaaEthoamCtrlTable table or alaSaaMacCtrlTable table. Enumeration: 'ipSaa': 1, 'macSaa': 3, 'ethSaa': 2, 'undefined': 0.
                     alaSaaCtrlRuns 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.7 counter32 read-only
Indicates number of times SAA test has been executed.
                     alaSaaCtrlFailures 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.8 counter32 read-only
Indicates the number of times this SAA test has failed.
                     alaSaaCtrlLastRunResult 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.9 integer read-only
The result of the latest SAA test iteration. Enumeration: 'undetermined': 0, 'failed': 2, 'aborted': 3, 'success': 1.
                     alaSaaCtrlLastRunTime 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.10 dateandtime read-only
The time at which the last iteration of the SAA was run.
                     alaSaaCtrlInterval 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.11 integer32 read-only
Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500.
                     alaSaaCtrlStartAt 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.12 dateandtime read-only
Specifies the time at which the SAA test is to be started. The deci-seconds specified in DateAndTime has no significance in scheduling SAA. The year in DateAndTime must be in the range from 1970 to 2037.
                     alaSaaCtrlStopAt 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.13 dateandtime read-only
Specifies the time at which the SAA test is to be stopped.Special value for DataAndTime which is 9999-12-31,23:59:59.0 is used to reset the existing configured value of this object, indicating that the SAA test should never stop. The deci-seconds in the DateAndTime has no significance in scheduling SAA.The year in DateAndTime must be in the range from 1970 to 2037.
                     alaSaaCtrlMaxHistoryRows 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.14 integer32 read-only
Specifies the maximum number of iterations for which history data is maintained.
                     alaSaaCtrlJitterThreshold 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.15 integer32 read-only
Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled.
                     alaSaaCtrlRTTThreshold 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.16 integer32 read-only
Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled.
         alaSaaIpCtrlConfig 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2
             alaSaaIpCtrlTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1 no-access
It defines the ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaIpResultsTable and alaSaaIpHistoryTable.
                 alaSaaIpCtrlEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1 no-access
Entry for the alaSaaIpCtrl table.
                     alaSaaIpCtrlOwnerIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.1 snmpadminstring no-access
Owner name to identify the responsiblity of the entries in the table.
                     alaSaaIpCtrlTestIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.2 snmpadminstring no-access
Unique name to identify the entries in the table. This name is unique across various SNMP users.
                     alaSaaIpCtrlRowStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.3 rowstatus read-only
Allows entries to be created and deleted in the table. createAndWait value is not supported for this object.
                     alaSaaIpCtrlTestMode 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.4 integer read-only
Specifies the type of ping test defined by this entry. Enumeration: 'icmpEcho': 1.
                     alaSaaIpCtrlTgtAddrType 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.5 inetaddresstype read-only
Specifies the InetAddress type of host address to be used as the destination for performing a ping operation. InetAddressIPv4(1) is the only type currently supported.
                     alaSaaIpCtrlTgtAddress 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.6 inetaddress read-only
Specifies the IP host address to be used as the destination for performing a ping operation.
                     alaSaaIpCtrlSrcAddrType 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.7 inetaddresstype read-only
Specifies the InetAddress type of host address to be used as the source for performing a ping operation. InetAddressIPv4(1) is the only type currently supported.
                     alaSaaIpCtrlSrcAddress 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.8 inetaddress read-only
Specifies the IP host address to be used as the source for performing a ping operation. The default value of this object is 0.0.0.0 if alaSaaIpCtrlSrcAddrType is set to ipv4.
                     alaSaaIpCtrlPayloadSize 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.9 integer32 read-only
Specifies the size of the ICMP payload to be used for the ping operation.
                     alaSaaIpCtrlNumPkts 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.10 integer32 read-only
Specifies the number of packets to be sent in one ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
                     alaSaaIpCtrlInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.11 integer32 read-only
Specifies the delay between two consecutive packets transmitted during a ping iteration.The value specified should be a multiple of 100.
                     alaSaaIpCtrlTypeOfService 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.12 integer32 read-only
Specifies the type of service
                     alaSaaIpCtrlVRFId 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.13 integer32 read-only
Specifies the VRF ID. Only the value '0' is currently supported.
                     alaSaaIpCtrlTotalPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.14 counter32 read-only
Specifies the total number of packets sent during all the ping iterations.
                     alaSaaIpCtrlTotalPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.15 counter32 read-only
Specifies the total number of packets received during all the ping iterations.
                     alaSaaIpCtrlMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.16 integer32 read-only
Specifies the minimum round trip time among all the iterations of the SAA.
                     alaSaaIpCtrlAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.17 integer32 read-only
Specifies the average round trip time of all the iterations of the SAA.
                     alaSaaIpCtrlMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.18 integer32 read-only
Specifies the maximum round trip time among all the iterations of the SAA.
                     alaSaaIpCtrlMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.19 integer32 read-only
Specifies the minimum jitter among all the iterations of the SAA.
                     alaSaaIpCtrlAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.20 integer32 read-only
Specifies the average jitter of all the iterations of the SAA.
                     alaSaaIpCtrlMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.21 integer32 read-only
Specifies the maximum jitter among all the iterations of the SAA.
                     alaSaaIpCtrlTSMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.22 dateandtime read-only
Specifies the timestamp of the iteration that gave the minimum packet delay.
                     alaSaaIpCtrlTSMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.23 dateandtime read-only
Specifies the timestamp of the iteration that gave the maximum packet delay.
                     alaSaaIpCtrlTSMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.24 dateandtime read-only
Specifies the timestamp of the iteration that gave the minimum packet jitter.
                     alaSaaIpCtrlTSMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.25 dateandtime read-only
Specifies the timestamp of the iteration that gave the maximum packet jitter.
         alaSaaIpResults 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3
             alaSaaIpResultsTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1 no-access
Defines the IP Results Table for providing the capability of performing IP Ping operations. The results of these operations are stored in the alaSaaIpResultsTable and the alaSaaIpHistoryTable. An entry is removed from the alaSaaIpResultsTable when its corresponding alaSaaCtrlEntry is deleted.
                 alaSaaIpResultsEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1 no-access
Entry for the alaSaaResults table. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaIpCtrlTable.
                     alaSaaIpResultsTestRunIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.1 unsigned32 no-access
The value of alaSaaIpResultsTestRunIndex identifies the row entry that reports results for a single OAM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
                     alaSaaIpResultsPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.2 counter32 read-only
Specifies the number of packets sent during a single ping iteration.
                     alaSaaIpResultsPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.3 counter32 read-only
Specifies the number of packets received during a single ping iteration.
                     alaSaaIpResultsInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.4 integer32 read-only
Specifies the inter-packet-delay with which the packets were sent in the iteration.
                     alaSaaIpResultsRunResult 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.5 integer read-only
The result of the iteration. Enumeration: 'undetermined': 0, 'failed': 2, 'aborted': 3, 'success': 1.
                     alaSaaIpResultsRunResultReason 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.6 octet string read-only
If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'.
                     alaSaaIpResultsRunTime 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.7 dateandtime read-only
The date and time at which the iteraton was run.
                     alaSaaIpResultsMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.8 integer32 read-only
The minimum round trip time.
                     alaSaaIpResultsAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.9 integer32 read-only
The average round trip time.
                     alaSaaIpResultsMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.10 integer32 read-only
The maximum round trip time.
                     alaSaaIpResultsMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.11 integer32 read-only
Minumum jitter value.
                     alaSaaIpResultsAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.12 integer32 read-only
Average jitter value.
                     alaSaaIpResultsMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.13 integer32 read-only
Maximum jitter value
         alaSaaIpHistory 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4
             alaSaaIpHistoryTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1 no-access
It is the table for storing the results of a ping operation. An entry in this table is created when a ping operation is performed. Entries are removed from this table when its corresponding alaSaaCtrlEntry is deleted.
                 alaSaaIpHistoryEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1 no-access
Entry of the alaSaaIpHistory table.
                     alaSaaIpHistoryIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.1 unsigned32 no-access
An entry in this table is created when the result of a ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaIpPingCtrlEntry that a ping iteration result (alaSaaIpHistoryEntry) belongs to. The alaSaaIpHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored.
                     alaSaaIpHistoryPktRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.2 integer32 read-only
The round trip time taken by a single packet in an iteration.
                     alaSaaIpHistoryPktJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.3 integer32 read-only
The jitter value for a single packet in an iteration.
         alaSaaEthoamCtrlConfig 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5
             alaSaaEthoamCtrlTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1 no-access
Defines the table for providing, via SNMP, the capability of performing Ethernet Loopback and DMM test operations. The results of these tests are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable.
                 alaSaaEthoamCtrlEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1 no-access
Defines an entry in the alaSaaEthoamCtrlTable.
                     alaSaaEthoamCtrlOwnerIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.1 snmpadminstring no-access
Owner name to identify the responsiblity of the entries in the table.
                     alaSaaEthoamCtrlTestIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.2 snmpadminstring no-access
Unique name to identify the entries in the table. This name is unique across various SNMP users.
                     alaSaaEthoamCtrlRowStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.3 rowstatus read-only
This object allows entries to be created and deleted in the alaSaaEthoamCtrlTable. Deletion of an entry in this table results in all corresponding (same alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable entries being deleted.
                     alaSaaEthoamCtrlTestMode 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.4 integer read-only
Specifies the type of Ethernet OAM test defined by this entry. ethernetLoopback - tests connectivity and round trip time by sending loopback requests. ethernetDmm - tests connectivity and round trip time by sending timestamped packets. Enumeration: 'ethernetLoopback': 1, 'ethernetDmm': 2.
                     alaSaaEthoamCtrlTgtMepId 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.5 integer32 read-only
The Mep-Id of the destination to which the Ethernet Loopback or DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry.
                     alaSaaEthoamCtrlTgtMAC 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.6 macaddress read-only
The Target MAC Address of the destination to which the Ethernet Loopback or DMM message is to be sent: A unicast destination MAC address. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry.
                     alaSaaEthoamCtrlSrcMepId 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.7 integer32 read-only
The Mep-Id of the source node initiating the Ethernet Loopback or DMM message.
                     alaSaaEthoamCtrlDomainName 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.8 dot1agcfmmaintdomainname read-only
The name of the domain to which the source Mep belongs.
                     alaSaaEthoamCtrlAssociationName 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.9 dot1agcfmmaintassocname read-only
The name of the association in the domain (specified by alaSaaEthoamCtrlDomainName) to which the source Mep belongs.
                     alaSaaEthoamCtrlPktTimeOut 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.10 integer32 read-only
The maximum time to wait for the reply of the transmitted packet.
                     alaSaaEthoamCtrlNumPkts 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.11 integer32 read-only
The number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
                     alaSaaEthoamCtrlInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.12 integer32 read-only
Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100.
                     alaSaaEthoamCtrlPktData 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.13 octet string read-only
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
                     alaSaaEthoamCtrlVlanPriority 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.14 integer32 read-only
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
                     alaSaaEthoamCtrlDropEligible 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.15 truthvalue read-only
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
                     alaSaaEthoamCtrlTotalPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.16 unsigned32 read-only
Specifies the total number of packets received during all the Eth-LB/DMM iterations.
                     alaSaaEthoamCtrlTotalPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.17 unsigned32 read-only
Specifies the total number of packets sent during all the Eth-LB/DMM iterations.
                     alaSaaEthoamCtrlMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.18 integer32 read-only
Specifies the minimum round trip time among all the iterations of the SAA.
                     alaSaaEthoamCtrlAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.19 integer32 read-only
Specifies the average round trip time of all the iterations of the SAA.
                     alaSaaEthoamCtrlMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.20 integer32 read-only
Specifies the maximum round trip time among all the iterations of the SAA.
                     alaSaaEthoamCtrlMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.21 integer32 read-only
Specifies the minimum jitter among all the iterations of the SAA.
                     alaSaaEthoamCtrlAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.22 integer32 read-only
Specifies the average jitter of all the iterations of the SAA.
                     alaSaaEthoamCtrlMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.23 integer32 read-only
Specifies the maximum jitter among all the iterations of the SAA.
                     alaSaaEthoamCtrlTSMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.24 dateandtime read-only
The timestamp of the iteration that gave the minimum packet delay.
                     alaSaaEthoamCtrlTSMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.25 dateandtime read-only
The timestamp of the iteration that gave the maximum packet delay.
                     alaSaaEthoamCtrlTSMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.26 dateandtime read-only
The timestamp of the iteration that gave the minimum packet jitter.
                     alaSaaEthoamCtrlTSMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.27 dateandtime read-only
The timestamp of the iteration that gave the maximum packet jitter.
         alaSaaEthoamResults 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6
             alaSaaEthoamResultsTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1 no-access
Defines the Ethoam Results Table for providing the capability of performing Eth-LB/DMM operations. The results of these operations are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. An entry is removed from the alaSaaEthoamResultsTable when its corresponding alaSaaCtrlEntry is deleted.
                 alaSaaEthoamResultsEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1 no-access
Defines an entry in the alaSaaEthoamResultsTable. The alaSaaEthoamResultsTable has the same indexing as the alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to correspond to the alaSaaEthoamCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaEthoamCtrlTable.
                     alaSaaEthoamResultsTestRunIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.1 unsigned32 no-access
The value of alaSaaEthoamResultsTestRunIndex identifies the row entry that reports results for a single Eth-LB/DMM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
                     alaSaaEthoamResultsPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.2 unsigned32 read-only
Specifies the number of packets sent during a single Eth-LB/DMM iteration.
                     alaSaaEthoamResultsPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.3 unsigned32 read-only
Specifies the number of packets received during a single Eth-LB/DMM iteration
                     alaSaaEthoamResultsInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.4 integer32 read-only
Specifies the inter-packet-delay with which the packets were sent in the iteration.
                     alaSaaEthoamResultsRunResult 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.5 integer read-only
The result of the Eth-LB/DMM iteration. Enumeration: 'undetermined': 0, 'failed': 2, 'aborted': 3, 'success': 1.
                     alaSaaEthoamResultsRunResultReason 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.6 octet string read-only
If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'.
                     alaSaaEthoamResultsRunTime 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.7 dateandtime read-only
The date and time at which the iteraton was run.
                     alaSaaEthoamResultsMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.8 integer32 read-only
The minimum round trip time.
                     alaSaaEthoamResultsAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.9 integer32 read-only
The average round trip time.
                     alaSaaEthoamResultsMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.10 integer32 read-only
The maximum round trip time.
                     alaSaaEthoamResultsMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.11 integer32 read-only
The minimum jitter value.
                     alaSaaEthoamResultsAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.12 integer32 read-only
The average jitter value.
                     alaSaaEthoamResultsMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.13 integer32 read-only
The maximum jitter value.
         alaSaaEthoamHistory 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7
             alaSaaEthoamHistoryTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1 no-access
Defines a table for storing the results of an Eth-LB/DMM iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an Eth-LB/DMM test is determined. An entry is removed from this table when its corresponding alaSaaEthoamCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaEthoamHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaEthoamHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows.
                 alaSaaEthoamHistoryEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1 no-access
                     alaSaaEthoamHistoryIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.1 unsigned32 no-access
An entry in this table is created when the result of an Eth-LB/DMM iteration is determined. The initial 2 instance identifier index values identify the alaSaaEthoamCtrlEntry that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs to. The alaSaaEthoamHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored.
                     alaSaaEthoamHistoryPktRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.2 integer32 read-only
The round trip time taken by a single packet in an iteration.
                     alaSaaEthoamHistoryPktJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.3 integer32 read-only
The jitter value for a single packet in an iteration.
         alaSaaMacCtrlConfig 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8
             alaSaaMacCtrlTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1 no-access
It defines the MAC-Ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaMacResultsTable and alaSaaMacHistoryTable.
                 alaSaaMacCtrlEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1 no-access
Entry for the alaSaaMacCtrl table.
                     alaSaaMacCtrlOwnerIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.1 snmpadminstring no-access
Owner name to identify the responsiblity of the entries in the table.
                     alaSaaMacCtrlTestIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.2 snmpadminstring no-access
Unique name to identify the entries in the table. This name is unique across various SNMP users.
                     alaSaaMacCtrlRowStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.3 rowstatus read-only
Allows entries to be created and deleted in the table. createAndWait value is not supported for this object.
                     alaSaaMacCtrlDstAddress 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.4 macaddress read-only
Specifies the mac address to be used as the destination for performing a MAC-Ping operation.
                     alaSaaMacCtrlVlan 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.5 integer32 read-only
The 12 bit Vlan value to be used in the VLAN tag, in the transmitted frame.
                     alaSaaMacCtrlVlanPriority 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.6 integer32 read-only
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
                     alaSaaMacCtrlIsid 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.7 integer32 read-only
The i-domain Service Indentifier (I-SID) which identifies the service instance in a PBB network on a BEB switch. For a customer packet flowing toward the b-domain, the I-SID is derived from the VFI and inserted into the packet. For a packet arrived from the b-domain, the I-SID is used to identify the VFI for the i-domain processing. From the service MIB.
                     alaSaaMacCtrlPktData 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.8 octet string read-only
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
                     alaSaaMacCtrlDropEligible 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.9 truthvalue read-only
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
                     alaSaaMacCtrlPayloadSize 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.10 integer32 read-only
Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.
                     alaSaaMacCtrlNumPkts 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.11 integer32 read-only
Specifies the number of packets to be sent in one MAC-Ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
                     alaSaaMacCtrlInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.12 integer32 read-only
Specifies the delay between two consecutive packets transmitted during a MAC-Ping iteration.The value specified should be a multiple of 100.
                     alaSaaMacCtrlTotalPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.13 counter32 read-only
Specifies the total number of packets sent during all the ping iterations.
                     alaSaaMacCtrlTotalPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.14 counter32 read-only
Specifies the total number of packets received during all the ping iterations.
                     alaSaaMacCtrlMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.15 integer32 read-only
Specifies the minimum round trip time among all the iterations of the SAA.
                     alaSaaMacCtrlAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.16 integer32 read-only
Specifies the average round trip time of all the iterations of the SAA.
                     alaSaaMacCtrlMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.17 integer32 read-only
Specifies the maximum round trip time among all the iterations of the SAA.
                     alaSaaMacCtrlMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.18 integer32 read-only
Specifies the minimum jitter among all the iterations of the SAA.
                     alaSaaMacCtrlAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.19 integer32 read-only
Specifies the average jitter of all the iterations of the SAA.
                     alaSaaMacCtrlMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.20 integer32 read-only
Specifies the maximum jitter among all the iterations of the SAA.
                     alaSaaMacCtrlTSMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.21 dateandtime read-only
Specifies the timestamp of the iteration that gave the minimum packet delay.
                     alaSaaMacCtrlTSMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.22 dateandtime read-only
Specifies the timestamp of the iteration that gave the maximum packet delay.
                     alaSaaMacCtrlTSMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.23 dateandtime read-only
Specifies the timestamp of the iteration that gave the minimum packet jitter.
                     alaSaaMacCtrlTSMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.24 dateandtime read-only
Specifies the timestamp of the iteration that gave the maximum packet jitter.
         alaSaaMacResults 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9
             alaSaaMacResultsTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1 no-access
Defines the MAC-Ping Results Table for providing the capability of performing MAC-Ping operations. The results of these operations are stored in the alaSaaMacResultsTable and the alaSaaMacHistoryTable. An entry is removed from the alaSaaMacResultsTable when its corresponding alaSaaCtrlEntry is deleted.
                 alaSaaMacResultsEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1 no-access
Defines an entry in the alaSaaMacResultsTable. The alaSaaMacResultsTable has the same indexing as the alaSaaMacCtrlTable in order for a alaSaaMacResultsEntry to correspond to the alaSaaMacCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaMacCtrlTable.
                     alaSaaMacResultsTestRunIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.1 unsigned32 no-access
The value of alaSaaMacResultsTestRunIndex identifies the row entry that reports results for a single test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
                     alaSaaMacResultsPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.2 unsigned32 read-only
Specifies the number of packets sent during a single MAC-Ping iteration.
                     alaSaaMacResultsPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.3 unsigned32 read-only
Specifies the number of packets received during a single MAC-Ping iteration
                     alaSaaMacResultsInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.4 integer32 read-only
Specifies the inter-packet-delay with which the packets were sent in the iteration.
                     alaSaaMacResultsRunResult 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.5 integer read-only
The result of the MAC-Ping iteration. Enumeration: 'undetermined': 0, 'failed': 2, 'aborted': 3, 'success': 1.
                     alaSaaMacResultsRunResultReason 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.6 octet string read-only
If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'.
                     alaSaaMacResultsRunTime 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.7 dateandtime read-only
The date and time at which the iteraton was run.
                     alaSaaMacResultsMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.8 integer32 read-only
The minimum round trip time.
                     alaSaaMacResultsAvgRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.9 integer32 read-only
The average round trip time.
                     alaSaaMacResultsMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.10 integer32 read-only
The maximum round trip time.
                     alaSaaMacResultsMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.11 integer32 read-only
The minimum jitter value.
                     alaSaaMacResultsAvgJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.12 integer32 read-only
The average jitter value.
                     alaSaaMacResultsMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.13 integer32 read-only
The maximum jitter value.
         alaSaaMacHistory 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10
               alaSaaMacHistoryTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1 no-access
Defines a table for storing the results of a MAC-Ping iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an MAC-Ping test is determined. An entry is removed from this table when its corresponding alaSaaMacCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaMacHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaMacHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows.
                   alaSaaMacHistoryEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1 no-access
                       alaSaaMacHistoryIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.1 unsigned32 no-access
An entry in this table is created when the result of an MAC-ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaMacCtrlEntry that an MAC-ping iteration result (alaSaaMacHistoryEntry) belongs to. The alaSaaMacHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored.
                       alaSaaMacHistoryPktRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.2 integer32 read-only
The round trip time taken by a single packet in an iteration.
                       alaSaaMacHistoryPktJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.3 integer32 read-only
The jitter value for a single packet in an iteration.
         alaSaaMacResultsPort 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11
               alaSaaMacResultsPortTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1 no-access
Defines a table for storing the results of ports for a MAC-Ping iteration. It only holds results from the last iteration.
                   alaSaaMacResultsPortEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1 no-access
                       alaSaaMacResultsPortChassis 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.1 integer32 no-access
The chassis number of the entry.
                       alaSaaMacResultsPortSlot 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.2 integer32 no-access
The slot number of the entry.
                       alaSaaMacResultsPortPort 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.3 integer32 no-access
The port number of the entry.
                       alaSaaMacResultsPortPktsSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.4 integer32 read-only
The number of transmit packets.
                       alaSaaMacResultsPortPktsRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.5 integer32 read-only
The number of receive packets.
                       alaSaaMacResultsPortRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.6 integer32 read-only
The round trip time taken by a single packet in an iteration.
                       alaSaaMacResultsPortMinRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.7 integer32 read-only
The minimum round trip time taken by a single packet for the port.
                       alaSaaMacResultsPortMaxRTT 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.8 integer32 read-only
The maximum round trip time taken by a single for the port.
                       alaSaaMacResultsPortJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.9 integer32 read-only
The jitter value for a single packet in an iteration.
                       alaSaaMacResultsPortMinJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.10 integer32 read-only
The minimum jitter value for a single packet for the port.
                       alaSaaMacResultsPortMaxJitter 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.11 integer32 read-only
The maximum jitter value for a single packet for the port.
         alaSaaXmlFeature 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13
               alaSaaXmlStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.1 integer read-only
Enables the XML file feature. Enumeration: 'enable': 1, 'disable': 2.
               alaSaaXmlFilename 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.2 snmpadminstring read-only
Save file location.
               alaSaaXmlInterval 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.3 integer32 read-only
Interval where SAA will save the file. The value is in minutes.
         alaSaaSpbFeature 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14
               alaSaaSpbAutoCreate 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.1 integer read-write
Determines if the SPB VLANs are automatically configured. Enumeration: 'on': 1, 'off': 2.
               alaSaaSpbAutoStart 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.2 integer read-write
Determines if the SPB VLANs are automatically started. Enumeration: 'on': 1, 'off': 2.
               alaSaaSpbInterval 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.3 integer32 read-write
Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500.
               alaSaaSpbNumPkts 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.4 integer32 read-write
The number of packets to be sent in one iteration of Eth-LB/DMM test.
               alaSaaSpbInterPktDelay 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.5 integer32 read-write
Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100.
               alaSaaSpbPayloadSize 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.6 integer32 read-write
Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.
               alaSaaSpbVlanPriority 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.7 integer32 read-write
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
               alaSaaSpbDropEligible 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.8 truthvalue read-write
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
               alaSaaSpbPktData 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.9 octet string read-write
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
               alaSaaSpbJitterThreshold 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.10 integer32 read-write
Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled.
               alaSaaSpbRTTThreshold 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.11 integer32 read-write
Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled.
               alaSaaSpbReset 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.12 truthvalue read-write
When set TRUE, will set the alaSaaSpbFeature variables to the defualts.
               alaSaaSpbKeep 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.13 integer read-write
When set on, SPB sessions will not be deallocated when SPB indicates a MAC or VLAN went away. Enumeration: 'on': 1, 'off': 2.
               alaSaaSpbFlush 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.14 truthvalue read-write
When set TRUE, SPB sessions will be flushed and reallocated with the current SPB MACs and VLANs.
         saaTrapsObj 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.15
     alcatelIND1SaaMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.56.1.2
Branch for Saa Module MIB Subsystem Conformance Information.
         alcatelIND1SaaMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1
Branch for Saa Module MIB Subsystem Units of Conformance.
             alaSaaCtrlConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.1
Collection of objects for management of Saa control Group.
             alaSaaIpCtrlConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.2
Collection of objects for management of Saa Ip Configuration Table.
             alaSaaIpResultsGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.3
Collection of objects for management of Saa Ip Results Table.
             alaSaaIpHistoryGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.4
Collection of objects for management of Saa Ip history table.
             alaSaaEthoamCtrlConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.5
Collection of objects for management of Saa Ethoam Configuration Table.
             alaSaaEthoamResultsGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.6
Collection of objects for management of Saa Ethoam Results Table.
             alaSaaEthoamHistoryGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.7
Collection of objects for management of Saa Ethoam history table.
             alaSaaMacCtrlConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.8
Collection of objects for management of Saa MAC-Ping Configuration Table.
             alaSaaMacResultsGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.9
Collection of objects for management of Saa MAC-Ping Results Table.
             alaSaaMacHistoryGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.10
Collection of objects for management of Saa Mac-Ping History table.
             alaSaaNotificationsGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.11
A collection of notifications used by SAA to signal to a management entity that SAA iteration has completed.
             alaSaaMacResultsPortGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.12
Collection of objects for management of Saa Mac-Ping Port table.
             alaSaaXmlGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.13
Collection of objects for management of profile bindings.
             alaSaaSpbGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.14
Collection of objects for management of profile bindings.
         alcatelIND1SaaMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2
Branch for Saa Module MIB Subsystem Compliance Statements.
             alcatelIND1SaaMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2.1
Compliance statement for Saa.