ALCATEL-IND1-PCAM-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-PCAM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ALCATEL-IND1-BASE, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1PCAMMIB 1.3.6.1.4.1.6486.801.1.1.1.4.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This MIB contains management information for Coronado Layer 3 Hardware Routing Engine (HRE) management. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1PCAMMIBObjects 1.3.6.1.4.1.6486.801.1.1.1.4.1.1
Branch for Coronado Layer 3 HRE Managed Objects.
         alaCoroL3HrePerModeTable 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1 no-access
The statistics and configurable data for a Coronado L3 HRE mode.
             alaCoroL3HrePerModeTableEntry 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1 no-access
Each entry corresponds to a single mode for a single Coronado.
                 alaCoroL3HrePerModeSlotNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.1 unsigned32 read-only
The slot number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HrePerModeSliceNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.2 unsigned32 read-only
The slice number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HrePerModeModeNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.3 integer read-only
Identifier for L3 HRE mode. Note that mode 3 refers to data used for modes 3 through 5 since they share hash function and memory space.
                 alaCoroL3HreModeHashTableSize 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.4 unsigned32 read-only
Number of hash buckets to be used for this mode. This must be 0 or a power of 2.
                 alaCoroL3HreModeHashEntriesInUse 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.5 unsigned32 read-only
Number of hash buckets currently in use for this mode.
                 alaCoroL3HreModeCollEntriesInUse 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.6 unsigned32 read-only
Number of collision entries in use by this mode.
                 alaCoroL3HreModeCurrentHashFunction 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.7 corol3hashfunction read-only
Current hash function in use by this mode.
                 alaCoroL3HreMaxCollChainLen 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.8 unsigned32 read-only
Maximum length for the collision chains in this mode.
                 alaCoroL3HreAvgCollChainLen 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.9 unsigned32 read-only
Average length for the collision chains in this mode.
         alaCoroL3HrePerCoronadoStatsTable 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2 no-access
The statistics for a Coronado L3 HRE.
             alaCoroL3HrePerCoronadoStatsTableEntry 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1 no-access
Each entry corresponds to a single Coronado.
                 alaCoroL3HreSlotNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.1 unsigned32 read-only
The slot number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HreSliceNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.2 unsigned32 read-only
The slice number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HreRouteCacheEntriesTotal 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.3 unsigned32 read-only
Total number of configured route cache entries.
                 alaCoroL3HreRouteCacheEntriesInUse 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.4 unsigned32 read-only
Number of route cache entries currently in-use.
                 alaCoroL3HreIpPacketsReceived 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.5 counter64 read-only
Number of IP packets received.
                 alaCoroL3HreIpBytesReceived 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.6 counter64 read-only
Number of IP bytes received.
                 alaCoroL3HreIpPacketsForwarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.7 counter64 read-only
Number of IP packets routed.
                 alaCoroL3HreIpBytesForwarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.8 counter64 read-only
Number of IP bytes routed.
                 alaCoroL3HreIpPacketsDiscarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.9 counter64 read-only
Number of IP packets discarded.
                 alaCoroL3HreIpBytesDiscarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.10 counter64 read-only
Number of IP bytes discarded.
                 alaCoroL3HreIpPacketsFragmented 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.11 counter64 read-only
Number of IP packets fragmented.
                 alaCoroL3HreIpPacketsFragsGenerated 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.12 counter64 read-only
Number of IP packet fragments generated.
                 alaCoroL3HreIpPacketsFailedToFrag 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.13 counter64 read-only
Number of IP packets that could not be fragmented because IP flag precluded it.
                 alaCoroL3HreIpxPacketsReceived 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.14 counter64 read-only
Number of IPX packets received.
                 alaCoroL3HreIpxBytesReceived 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.15 counter64 read-only
Number of IPX bytes received.
                 alaCoroL3HreIpxPacketsForwarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.16 counter64 read-only
Number of IPX packets routed.
                 alaCoroL3HreIpxBytesForwarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.17 counter64 read-only
Number of IPX bytes routed.
                 alaCoroL3HreIpxPacketsDiscarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.18 counter64 read-only
Number of IPX packets discarded.
                 alaCoroL3HreIpxBytesDiscarded 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.19 counter64 read-only
Number of IPX bytes discarded.
         alaCoroL3HreUpdateChanges 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.3 integer read-write
Updating this object causes the change list to either be applied cleared. Enumeration: 'apply': 0, 'clear': 1.
         alaCoroL3HreChangeTable 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4 no-access
The statistics and configurable data for a Coronado L3 HRE mode.
             alaCoroL3HreChangeTableEntry 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1 no-access
Each entry corresponds to a single mode for a single Coronado.
                 alaCoroL3HreChangeSlotNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.1 unsigned32 read-only
The slot number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HreChangeSliceNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.2 unsigned32 read-only
The slice number in which the Coronado resides. Valid range will vary depending on hardware configuration.
                 alaCoroL3HreChangeModeNumber 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.3 integer read-only
Identifier for L3 HRE mode. Note that mode 3 refers to data used for modes 3 through 5 since they share hash function and memory space.
                 alaCoroL3HreChangeHashTableSize 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.4 unsigned32 read-write
Number of hash buckets to be used for this mode. This must be 0 or a power of 2.
                 alaCoroL3HreChangeHashFunction 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.5 corol3hashfunction read-write
Hash function to be used for this mode.
                 alaCoroL3HreChangeClear 1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.6 integer read-write
Clears changes for the specified mode. Enumeration: 'clear': 0.
     alcatelIND1PCAMMIBConformance 1.3.6.1.4.1.6486.801.1.1.1.4.1.2
Branch for Coronado Layer 3 HRE Conformance Information.
         alcatelIND1PCAMMIBGroups 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.1
Branch for Coronado Layer 3 HRE Units of Conformance.
             alaCoroL3HrePerModeObjects 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.1.1
A collection of objects providing information for each mode.
             alaCoroL3HrePerCoronadoObjects 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.1.2
A collection of objects providing information for each Coronado.
             alaCoroL3HreChangeObjects 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.1.3
A collection of objects providing information for changes to be made.
         alcatelIND1PCAMMIBCompliances 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.2
Branch for Coronado Layer 3 HRE Compliance Statements.
             alcatelInd1PCAMMIBCompliance 1.3.6.1.4.1.6486.801.1.1.1.4.1.2.2.1
The compliance statement for the Coronado Layer 3.