ALC-OPT-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: ALC-OPT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
                     cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
                         cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
                             cdx6500PPCTALCCfgTable 1.3.6.1.4.1.449.2.1.2.1.1.27
                                   cdx6500PPCTALCPortTable 1.3.6.1.4.1.449.2.1.2.1.1.27.1 no-access
This table contains ALC Port configuration parameters
                                       cdx6500PPCTALCPortEntry 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1 no-access
Entries in the ALC Port Configuration Table.
                                           alcPCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.1 integer read-only
Port number of this port.
                                           alcPCfgPortType 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.2 integer read-only
Port Type of this port. Enumeration: 'alc': 31.
                                           alcPCfgSubtype 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.3 integer read-only
This is the ALC port subtype. alcHpad - Host PAD. alcTpad - Terminal PAD. Enumeration: 'alcHpad': 1, 'alcTpad': 2.
                                           alcPCfgPortControl 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.4 integer read-only
Specify any of the following port control options: simp : Simple connection with no control signal handshake. dtr : Connection with DTR control signal handshake. emri : Port emulates a modem and does dial-in/out handshake with RI. emdc : Port emulates a modem and does dial-in/out handshake with DCD. alcDte : DTE emulation with RTS/CTS handshake. Enumeration: 'dtr': 13, 'emri': 4, 'simp': 1, 'alcDte': 15, 'emdc': 5.
                                           alcPCfgClockSource 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.5 integer read-only
int : Internal clock source. ext : External clock source. Enumeration: 'int': 1, 'ext': 2.
                                           alcPCfgClockSpeed 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.6 integer read-only
This is the speed of the port in bits per second, when using internal clocking. Enumeration: 'clkspd1200': 1, 'clkspd19200': 5, 'clkspd2400': 2, 'clkspd38400': 6, 'clkspd4800': 3, 'clkspd9600': 4.
                                           alcPCfgPollDelayTimer 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.7 integer read-only
This is the delay in milliseconds to impose between poll cycles if no interchanges are polled. Valid on TPAD lines only.
                                           alcPCfgHostTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.8 integer read-only
On a poll coerced line, the host is considered to be down if a poll is not received within this time, specified in milliseconds. Valid on HPAD lines only.
                                           alcPCfgMaxMesgSize 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.9 integer read-only
This specifies the maximum size of messages that can be sent or received on this line excluding padding characters. TPAD may receive multiple messages in a frame, HPAD may transmit multiple messages in a frame.
                                           alcPCfgMinIntrvlBetweenPolls 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.10 integer read-only
The minimum length of time, in milliseconds, between polls issued on this line. Valid on TPAD lines only.
                                           alcPCfgRtsCtsTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.11 integer read-only
The time in milliseconds, within which CTS must be raised following the RTS signal.
                                           alcPCfgLeadPadChar 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.12 octet string read-only
This is the character to use when inserting leading padding characters.
                                           alcPCfgNumLeadPadChars 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.13 integer read-only
This is the number of leading padding characters to use.
                                           alcPCfgTrailPadChar 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.14 octet string read-only
This is the character to use when inserting trailing padding characters.
                                           alcPCfgNumTrailPadChars 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.15 integer read-only
This is the number of trailing padding characters to use.
                                           alcPCfgALCLineOptions 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.16 displaystring read-only
Select options on this ALC port as follows: NONE : no option specified EMB_SYNC : Sychronization characters are inserted between messages in the same frame. MASK8 : Indicates that the `8' bit is treated as zero when examining interchange addresses on this line. COERCE : Poll coercion is used. CLASH : Poll responses will be aborted if a poll is received whilst a response to a previous poll is being transmitted. RFRTM : Responses will be generated to Response and Forward RTM messages. RZRTM : Responses will be generated to enquiry RTM messages. SOFT_SYNC : Selects software synchronization. NULLS : Nulls are allowed in the data stream. BACKTOBACK : Frames may be received back to back. Any combination of the above maybe specified by summing (e.g. NULLS+BACKTOBACK. . .).
                                           alcPCfgConnType 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.17 integer read-only
none : No connection. x25 : Connection type is X.25. nc : Skipped during configuration Enumeration: 'x25': 2, 'none': 1, 'nc': 100.
                                           alcPCfgAcallMnemonic 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.18 displaystring read-only
This is the mnemonic to be used to establish the call when the call request is issued. The mnemonic must be defined in the mnemonic table. If no mnemonic is specified, ALP PAD will wait for the call. It consists of 0-8 alphanumeric characters, and the space character is used to blank the field.
                                           alcPCfgCallingAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.19 displaystring read-only
The calling address to be used in outbound calls. It consists of 0-15 BCD digits, and the space character is used to blank the field.
                                           alcPCfgCUD 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.20 displaystring read-only
The Call User Data field to be used in outbound calls. It consists of a list of up to 16 hexadecimal numbers between 0 and FF, separated by commas.
                                           alcPCfgNumOfBuffers 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.21 integer read-only
This defines the number of buffers that are available for data transfer in each direction. Each buffer will hold one message.
                                           alcPCfgInHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.22 displaystring read-only
This data is assumed to be at the start of all messages received from X.25. If IA and/or TA are specified in the header, the values associated with these positions are checked against the IA and TA associated with the header is then removed from the message, and replaced by the IA and TA associated with the connection.
                                           alcPCfgOutHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.23 displaystring read-only
This data is prefixed to all messages sent to X.25. If IA and/or TA are specified in the header, the IA and TA associated with the connection are inserted into the outgoing message at the positions specified by the header. The IA and TA received from ALC are removed and replaced with the OUT Header.
                                           alcPCfgReconnectTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.24 integer read-only
The time in seconds between attempts to establish an X.25 virtual circuit when the ALP connection is enabled, or after the SVC has been cleared.
                                           alcPCfgInactivityTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.25 integer read-only
The time in seconds after which the call is cleared if no data is transmitted or received. A value of 0 disables the timer.
                                           alcPCfgDebounceTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.26 integer read-only
This defines the time in seconds for which the PAD waits before implementing the shutdown action. If the time out is 0, shutdown occurs immediately.
                                           alcPCfgParity 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.27 integer read-only
none : No parity will be used. odd : All messages sent to X.25 will have odd parity. nc : Skipped during configuration Enumeration: 'none': 1, 'nc': 100, 'odd': 2.
                                           alcPCfgConnOptions 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.28 displaystring read-only
Options controlling the behaviour of the connection. NONE : No options are specified. HDR : ALP PAD discards all data messages incoming from the network in which the constant parts of the IN Header do not match the header of the message. ALCSD : If this option is specified and the SVC goes down, then the ALC entity is shutdown. CSD : If this option is specified and the ALC entity goes down, then the associated call is cleared. FLOW : If the number of free buffers decreases to 20% of its maximum, then flow control is imposed on the receiver. It is released when the number of free buffers reaches 50% of its maximum. If the option is not set, messages received when there are no buffers available will be discarded. Note that flow control requests from X.25 are always acted upon, regardless of the setting of this option. USE_ADDR : The address in the received message is used when the message is passed to ALC, and address checking is turned off. Any combination of the above maybe specified by summing (e.g. FLOW+USE_ADDR+. . .).
                                           alcPCfgAvailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.29 displaystring read-only
This specifies the text of a message that is broadcast to the ALC entity associated with this connection after a message from that terminal has been discarded due to the X.25 VC being down. This message is only sent if an Unavailable message has previously been sent to one of the terminals associated with this connection. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                                           alcPCfgUnavailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.30 displaystring read-only
This specifies the text of a message that is sent to a terminal when a message from that terminal is discarded because the X.25 VC is down. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                                   cdx6500PPCTALCInterchangeTable 1.3.6.1.4.1.449.2.1.2.1.1.27.2 no-access
This table contains ALC Interchange configuration parameters
                                       cdx6500PPCTALCInterchangeEntry 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1 no-access
Entries in the ALC Interchange Configuration Table.
                                           alcICfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.1 integer read-only
Port number of this port.
                                           alcICfgInterchangeAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.2 octet string read-only
The address of the interchange. Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used as line control characters.
                                           alcICfgOptionOnInvalidCCC 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.3 integer read-only
The action to be taken on receipt of a message with an invalid ccc. discard : Discard the message ignore : Treat the message as correct. reenter : (TPAD only) The configured `re-enter' message is sent to the terminal. resend : (TPAD only) A resend request message is sent to the terminal. Enumeration: 'ignore': 5, 'discard': 2, 'reenter': 4, 'resend': 3.
                                           alcICfgGenTerminalAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.4 octet string read-only
Specifies the terminal address to which broadcast messages are sent when the GTA option is specified.
                                           alcICfgHostTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.5 integer read-only
The host is considered to be down if a poll is not received within this period, which is specified in milliseconds.
                                           alcICfgMaxComponentsPerFrame 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.6 integer read-only
Specifies the maximum number of message segments transmitted in one frame (HPAD) or expected in one frame (TPAD).
                                           alcICfgFastPollCycleCount 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.7 integer read-only
The polling rate for an interchange in fast poll. A poll is issued to this interchange once in every n poll cycles on the line.
                                           alcICfgSlowPollCycleCount 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.8 integer read-only
The polling rate for an interchange in slow poll. One slow poll IA is polled every n poll cycles on the line.
                                           alcICfgN1Counter 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.9 integer read-only
The number of polls that can be sent without receiving a response before the interchange enters slow poll.
                                           alcICfgN2Counter 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.10 integer read-only
The number of good poll responses required before the interchange enters fast poll.
                                           alcICfgT1Timeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.11 integer read-only
The time, in milliseconds, within which an interchange must start responding to a poll.
                                           alcICfgT2Timeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.12 integer read-only
The time, in milliseconds, within which an interchange must complete its transmission.
                                           alcICfgReenterMessage 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.13 displaystring read-only
This specifies the text of a message sent to terminals when a message with an incorrect ccc is received and the action on receipt of an invalid ccc is REENTER. Note that some terminals may require control characters at the start of the message.
                                           alcICfgStartMessage 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.14 displaystring read-only
This specifies the text of a message sent to terminals when polling of this interchange is started and the STST option is configured. Note that some terminals may require control characters at the start of the message.
                                           alcICfgStopMessage 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.15 displaystring read-only
This specifies the text of a message sent to terminals when polling of this interchange is stopped and the STST option is configured. Note that some terminals may require control characters at the start of the message.
                                           alcICfgOptions 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.16 displaystring read-only
Select options on this ALC Interchange as follows : NONE : no option specified GTA : (TPAD only) Indicates that there is a general terminal address which may be used for broadcasting to all terminals on the interchange. NOPOLL : (TPAD only) Indicates that this interchange is not to be polled. RESET : Indicates that the interchange is capable of handling ALC Reset messages. STST : (TPAD only) Indicates that the configured start and stop messages should be transmitted when polling is started or stopped. Any combination of the above maybe specified by summing (e.g. GTA+NOPOLL+. . .).
                                           alcICfgValidTAList 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.17 displaystring read-only
A list of hexadecimal numbers between 1 and 3F separated by commas. /f or /r after each is used to indicate forward or reverse abort respectively. Ranges may be specified by separating two addresses by a dash `-'. Note that the addresses 0D, 1D, 2D, 3D and 3F are illegal. The list of terminal addresses that may be configured on the line, including the forward or reverse abort settings for each terminal.
                                           alcICfgConnType 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.18 integer read-only
none : No connection. x25 : Connection type is X.25. nc : Skipped during configuration Enumeration: 'x25': 2, 'none': 1, 'nc': 100.
                                           alcICfgAcallMnemonic 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.19 displaystring read-only
This is the mnemonic to be used to establish the call when the call request is issued. The mnemonic must be defined in the mnemonic table. If no mnemonic is specified, ALP PAD will wait for the call. It consists of 0-8 alphanumeric characters, and the space character is used to blank the field.
                                           alcICfgCallingAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.20 displaystring read-only
The calling address to be used in outbound calls. It consists of 0-15 BCD digits, and the space character is used to blank the field.
                                           alcICfgCUD 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.21 displaystring read-only
The Call User Data field to be used in outbound calls. It consists of a list of up to 16 hexadecimal numbers between 0 and FF, separated by commas.
                                           alcICfgNumOfBuffers 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.22 integer read-only
This defined the number of buffers that are available for data transfer in each direction. Each buffer will hold one message.
                                           alcICfgInHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.23 displaystring read-only
This data is assumed to be at the start of all messages received from X.25. If IA and/or TA are specified in the header, the values associated with these positions are checked against the IA and TA associated with the header is then removed from the message, and replaced by the IA and TA associated with the connection.
                                           alcICfgOutHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.24 displaystring read-only
This data is prefixed to all messages sent to X.25. If IA and/or TA are specified in the header, the IA and TA associated with the connection are inserted into the outgoing message at the positions specified by the header. The IA and TA received from ALC are removed and replaced with the OUT Header.
                                           alcICfgReconnectTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.25 integer read-only
The time in seconds between attempts to establish an X.25 virtual circuit when the ALP connection is enabled, or after the SVC has been cleared.
                                           alcICfgInactivityTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.26 integer read-only
The time in seconds after which the call is cleared if no data is transmitted or received. A value of 0 disables the timer.
                                           alcICfgDebounceTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.27 integer read-only
This defines the time in seconds for which the PAD waits before implementing the shutdown action. If the time out is 0, shutdown occurs immediately.
                                           alcICfgParity 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.28 integer read-only
none : No parity will be used. odd : All messages sent to X.25 will have odd parity. nc : Skipped during configuration Enumeration: 'none': 1, 'nc': 100, 'odd': 2.
                                           alcICfgConnOptions 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.29 displaystring read-only
Options controlling the behaviour of the connection. NONE : No options are specified. HDR : ALP PAD discards all data messages incoming from the network in which the constant parts of the IN Header do not match the header of the message. ALCSD : If this option is specified and the SVC goes down, then the ALC entity is shutdown. CSD : If this option is specified and the ALC entity goes down, then the associated call is cleared. FLOW : If the number of free buffers decreases to 20% of its maximum, then flow control is imposed on the receiver. It is released when the number of free buffers reaches 50% of its maximum. If the option is not set, messages received when there are no buffers available will be discarded. Note that flow control requests from X.25 are always acted upon, regardless of the setting of this option. USE_ADDR : The address in the received message is used when the message is passed to ALC, and address checking is turned off. Any combination of the above maybe specified by summing (e.g. FLOW+USE_ADDR+. . .).
                                           alcICfgAvailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.30 displaystring read-only
This specifies the text of a message that is broadcast to the ALC entity associated with this connection after a message from that terminal has been discarded due to the X.25 VC being down. This message is only sent if an Unavailable message has previously been sent to one of the terminals associated with this connection. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                                           alcICfgUnavailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.31 displaystring read-only
This specifies the text of a message that is sent to a terminal when a message from that terminal is discarded because the X.25 VC is down. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                                   cdx6500PPCTALCTerminalTable 1.3.6.1.4.1.449.2.1.2.1.1.27.3 no-access
This table contains ALC Terminal configuration parameters
                                       cdx6500PPCTALCTerminalEntry 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1 no-access
Entries in the ALC Terminal Configuration Table.
                                           alcTCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.1 integer read-only
Port number of this port.
                                           alcTCfgInterchangeAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.2 octet string read-only
The address of the interchange. Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used as line control characters.
                                           alcTCfgTerminalAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.3 octet string read-only
Address identifying this terminal.
                                           alcTCfgConnType 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.4 integer read-only
none : No connection type. x25 : Connection type is X.25. nc : Skipped during configuration Enumeration: 'x25': 2, 'none': 1, 'nc': 100.
                                           alcTCfgAcallMnemonic 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.5 displaystring read-only
This is the mnemonic to be used to establish the call when the call request is issued. The mnemonic must be defined in the mnemonic table. If no mnemonic is specified, ALP PAD will wait for the call. It consists of 0-8 alphanumeric characters, and the space character is used to blank the field.
                                           alcTCfgCallingAddress 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.6 displaystring read-only
The calling address to be used in outbound calls. It consists of 0-15 BCD digits, and the space character is used to blank the field.
                                           alcTCfgCUD 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.7 displaystring read-only
The Call User Data field to be used in outbound calls. It consists of a list of up to 16 hexadecimal numbers between 0 and FF, separated by commas.
                                           alcTCfgNumOfBuffers 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.8 integer read-only
This defined the number of buffers that are available for data transfer in each direction. Each buffer will hold one message.
                                           alcTCfgInHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.9 displaystring read-only
This data is assumed to be at the start of all messages received from X.25. If IA and/or TA are specified in the header, the values associated with these positions are checked against the IA and TA associated with the header is then removed from the message, and replaced by the IA and TA associated with the connection.
                                           alcTCfgOutHeader 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.10 displaystring read-only
This data is prefixed to all messages sent to X.25. If IA and/or TA are specified in the header, the IA and TA associated with the connection are inserted into the outgoing message at the positions specified by the header. The IA and TA received from ALC are removed and replaced with the OUT Header.
                                           alcTCfgReconnectTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.11 integer read-only
The time in seconds between attempts to establish an X.25 virtual circuit when the ALP connection is enabled, or after the SVC has been cleared.
                                           alcTCfgInactivityTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.12 integer read-only
The time in seconds after which the call is cleared if no data is transmitted or received. A value of 0 disables the timer.
                                           alcTCfgDebounceTimeout 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.13 integer read-only
This defines the time in seconds for which the PAD waits before implementing the shutdown action. If the time out is 0, shutdown occurs immediately.
                                           alcTCfgParity 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.14 integer read-only
none : No parity will be used. odd : All messages sent to X.25 will have odd parity. nc : Skipped during configuration Enumeration: 'none': 1, 'nc': 100, 'odd': 2.
                                           alcTCfgConnOptions 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.15 displaystring read-only
Options controlling the behaviour of the connection. NONE : No options are specified. HDR : ALP PAD discards all data messages incoming from the network in which the constant parts of the IN Header do not match the header of the message. ALCSD : If this option is specified and the SVC goes down, then the ALC entity is shutdown. CSD : If this option is specified and the ALC entity goes down, then the associated call is cleared. FLOW : If the number of free buffers decreases to 20% of its maximum, then flow control is imposed on the receiver. It is released when the number of free buffers reaches 50% of its maximum. If the option is not set, messages received when there are no buffers available will be discarded. Note that flow control requests from X.25 are always acted upon, regardless of the setting of this option. USE_ADDR : The address in the received message is used when the message is passed to ALC, and address checking is turned off. Any combination of the above maybe specified by summing (e.g. FLOW+USE_ADDR+. . .).
                                           alcTCfgAvailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.16 displaystring read-only
This specifies the text of a message that is broadcast to the ALC entity associated with this connection after a message from that terminal has been discarded due to the X.25 VC being down. This message is only sent if an Unavailable message has previously been sent to one of the terminals associated with this connection. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                                           alcTCfgUnavailableMesg 1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.17 displaystring read-only
This specifies the text of a message that is sent to a terminal when a message from that terminal is discarded because the X.25 VC is down. If no message is defined, none is sent. The space character is used to blank this field. Note that this is only used on TPAD configurations.
                 cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
                     cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
                         cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
                             cdx6500PPSTALCStatsTable 1.3.6.1.4.1.449.2.1.3.1.1.28
                                   cdx6500PPSTALCPortTable 1.3.6.1.4.1.449.2.1.3.1.1.28.1 no-access
This table contains ALC Port Statistics parameters.
                                       cdx6500PPSTALCPortEntry 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1 no-access
Entries in the ALC Port Statistics Table.
                                           alcPStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.1 integer read-only
Port number of this port.
                                           alcPStatsPortType 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.2 integer read-only
Port type of this port. Enumeration: 'alc': 31.
                                           alcPStatsPortState 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.3 integer read-only
Current Port State. connecting:The line has been enabled by the operator, but polling has not yet been established. online :The line is active. offline :The line has been disabled by the operator. pending :The line is inactive because of conditions detected by ALP PAD (X.25 virtual circuit not active). timedOut :The line is not being polled. This will be displayed on poll coerced HPAD lines only. flowCtrl :The application (ALP PAD) has imposed flow control on the line. na :Value not Available Enumeration: 'na': 100, 'timedOut': 7, 'flowCtrl': 11, 'connecting': 9, 'online': 2, 'offline': 1, 'pending': 8.
                                           alcPStatsFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.4 counter read-only
Number of frames received.
                                           alcPStatsFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.5 counter read-only
Number of frames transmitted.
                                           alcPStatsDataMesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.6 counter read-only
Number of data messages received.
                                           alcPStatsDataMesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.7 counter read-only
Number of data messages transmitted.
                                           alcPStatsCharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.8 counter read-only
Number of characters received.
                                           alcPStatsCharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.9 counter read-only
Number of characters transmitted.
                                           alcPStatsPolls 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.10 counter read-only
Number of polls transmitted or received.
                                           alcPStatsGAs 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.11 counter read-only
Number of Go Ahead messages transmitted or received.
                                           alcPStatsResets 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.12 counter read-only
Number of Reset messages transmitted or received.
                                           alcPStatsDiscardBadIAIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.13 counter read-only
Number of received messages discarded due to bad Interchange Address.
                                           alcPStatsDiscardBadIAOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.14 counter read-only
Number of transmitted messages discarded due to bad Interchange Address.
                                           alcPStatsMaxQSizeOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.15 integer read-only
Maximum transmit queue size.
                                           alcPStatsCCCErrors 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.16 counter read-only
Number of messages received with an invalid checksum.
                                           alcPStatsSignalLosses 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.17 counter read-only
Number of Signal Losses.
                                           alcPStatsOverlengthFrames 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.18 counter read-only
Number of overlength frames received.
                                           alcPStatsPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.19 integer read-only
Current Port Status. na :Value not Available Enumeration: 'down': 5, 'busyOut': 3, 'na': 100, 'enabled': 2, 'up': 4, 'disabled': 1.
                                           alcPStatsConnState 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.20 integer read-only
Current state of the connection. online :The connection is available for data transfer. offline :The connection has been disabled by an operator. connecting:The ALP PAD is attempting to make the X.25 virtual circuit available for use. inactive :The inactivity timer has expired, so the virtual circuit has been dropped. Data received from ALC will cause the connection to be re-established. pending :The CSD option has been configured and the ALC entity is currently down; hence the ALP PAD has disabled the virtual circuit. na :Value not Available Enumeration: 'na': 100, 'inactive': 4, 'connecting': 3, 'online': 1, 'offline': 2, 'pending': 5.
                                           alcPStatsALCMesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.21 counter read-only
The number of messages received from ALC.
                                           alcPStatsALCMesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.22 counter read-only
The number of messages transmitted to ALC.
                                           alcPStatsX25MesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.23 counter read-only
The number of messages received from X.25.
                                           alcPStatsX25MesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.24 counter read-only
The number of messages transmitted to X.25.
                                           alcPStatsALCCharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.25 counter read-only
The number of characters received from ALC.
                                           alcPStatsALCCharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.26 counter read-only
The number of characters transmitted to ALC.
                                           alcPStatsX25CharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.27 counter read-only
The number of characters received from X.25.
                                           alcPStatsX25CharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.28 counter read-only
The number of characters transmitted to X.25.
                                           alcPStatsALCDiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.29 counter read-only
The number of messages received by ALC for which the destination entity is unable to process the data.
                                           alcPStatsX25DiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.30 counter read-only
The number of messages received by X.25 for which the destination entity is unable to process the data.
                                           alcPStatsX25DiscardedMesgsBadALCAddr 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.31 counter read-only
The number of messages received from X.25 for which the addresses specified do not match those associated with the connection.
                                           alcPStatsX25DiscardedMesgsBadHeader 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.32 counter read-only
The number of messages received by X.25 of which the IN header configured does not match the header present in the message.
                                           alcPStatsX25DiscardedMesgsTooLong 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.33 counter read-only
The number of messages received from X.25 that were discarded because they were longer than the allowable ALC maximum configured.
                                           alcPStatsALCDiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.34 counter read-only
The number of messages discarded because the ALC outbound message queue was full.
                                           alcPStatsX25DiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.35 counter read-only
The number of messages discarded because the X.25 outbound message queue was full.
                                           alcPStatsCurrTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.36 integer read-only
The number of messages currently queued in the ALC outbound message queue for transmission.
                                           alcPStatsCurrTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.37 integer read-only
The number of messages currently queued in the X.25 outbound message queue for transmission.
                                           alcPStatsMaxTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.38 integer read-only
The maximum (highwater mark) size of the ALC outbound queue so far.
                                           alcPStatsMaxTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.39 integer read-only
The maximum (highwater mark) size of the X.25 outbound queue so far.
                                   cdx6500PPSTALCInterchangeTable 1.3.6.1.4.1.449.2.1.3.1.1.28.2 no-access
This table contains ALC Interchange Statistics parameters.
                                       cdx6500PPSTALCInterchangeEntry 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1 no-access
Entries in the ALC Interchange Statistics Table.
                                           alcIStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.1 integer read-only
Port number of this port.
                                           alcIStatsInterchangeAddress 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.2 octet string read-only
The address of the interchange. Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used as line control characters.
                                           alcIStatsInterchangeState 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.3 integer read-only
Current State of this Interchange. online :The interchange is active. This is displayed for HPAD interchanges, and TPAD interchanges configured as NOPOLL, only. offline :The interchange has been disabled by the operator. pending :The interchange is inactive because of conditions detected by the application (ALP PAD). failed :The line with which this interchange is associated is down. timedOut:The interchange is not being polled. This is displayed for HPAD interchanges on non poll-coerced lines only. flowCtrl:The application (ALP PAD) has imposed flow control on the interchange. stopped :The line with which this interchange is associated is in the FLOW CONTROL state. This is valid for TPAD interchanges only. slowPoll:The interchange is in slow poll. fastPoll:The interchange is in fast poll. na :Value not Available Enumeration: 'slowPoll': 4, 'na': 100, 'timedOut': 7, 'fastPoll': 3, 'failed': 10, 'flowCtrl': 11, 'stopped': 6, 'online': 2, 'offline': 1, 'pending': 8.
                                           alcIStatsFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.4 counter read-only
Number of ALC frames received.
                                           alcIStatsFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.5 counter read-only
Number of ALC frames transmitted.
                                           alcIStatsDataMesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.6 counter read-only
Number of ALC data messages received.
                                           alcIStatsDataMesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.7 counter read-only
Number of ALC data messages transmitted.
                                           alcIStatsCharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.8 counter read-only
Total number of characters received, excluding synchronization characters.
                                           alcIStatsCharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.9 counter read-only
Total number of characters transmitted, excluding synchronization characters.
                                           alcIStatsPolls 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.10 counter read-only
The number of poll messages transmitted for a line defined as a TPAD. The number received for one defined as HPAD.
                                           alcIStatsGAs 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.11 counter read-only
The number of Go Ahead messages transmitted for a line defined as HPAD. The number received for one defined as TPAD.
                                           alcIStatsResets 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.12 counter read-only
The number of Reset messages transmitted for a line defined as TPAD. The number received for one defined as HPAD.
                                           alcIStatsDiscardBadTAIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.13 counter read-only
The number of received messages discarded because the Terminal Address was not defined.
                                           alcIStatsDiscardBadTAOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.14 counter read-only
The number of transmitted messages discarded because the Terminal Address was not defined.
                                           alcIStatsDisabledIAIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.15 counter read-only
The number of received messages discarded because the Interchange was disabled.
                                           alcIStatsDisabledIAOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.16 counter read-only
The number of transmitted messages discarded because the Interchange was disabled.
                                           alcIStatsMaxQSizeOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.17 integer read-only
Maximum number of frames queued for transmission.
                                           alcIStatsCCCErrors 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.18 counter read-only
Number of messages received with an invalid checksum.
                                           alcIStatsT1Timeouts 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.19 counter read-only
Number of T1 timer expirations. This is defined for TPAD only.
                                           alcIStatsT2Timeouts 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.20 counter read-only
Number of T2 timer expirations. This is defined for TPAD only.
                                           alcIStatsConnState 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.21 integer read-only
Current state of the connection. online :The connection is available for data transfer. offline :The connection has been disabled by an operator. connecting:The ALP PAD is attempting to make the X.25 virtual circuit available for use. inactive :The inactivity timer has expired, so the virtual circuit has been dropped. Data received from ALC will cause the connection to be re-established. pending :The CSD option has been configured and the ALC entity is currently down; hence the ALP PAD has disabled the virtual circuit. na :Value not Available Enumeration: 'na': 100, 'inactive': 4, 'connecting': 3, 'online': 1, 'offline': 2, 'pending': 5.
                                           alcIStatsALCMesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.22 counter read-only
The number of messages received from ALC.
                                           alcIStatsALCMesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.23 counter read-only
The number of messages transmitted to ALC.
                                           alcIStatsX25MesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.24 counter read-only
The number of messages received from X.25.
                                           alcIStatsX25MesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.25 counter read-only
The number of messages transmitted to X.25.
                                           alcIStatsALCCharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.26 counter read-only
The number of characters received from ALC.
                                           alcIStatsALCCharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.27 counter read-only
The number of characters transmitted to ALC.
                                           alcIStatsX25CharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.28 counter read-only
The number of characters received from X.25.
                                           alcIStatsX25CharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.29 counter read-only
The number of characters transmitted to X.25.
                                           alcIStatsALCDiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.30 counter read-only
The number of messages received by ALC for which the destination entity is unable to process the data.
                                           alcIStatsX25DiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.31 counter read-only
The number of messages received by X.25 for which the destination entity is unable to process the data.
                                           alcIStatsX25DiscardedMesgsBadALCAddr 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.32 counter read-only
The number of messages received from X.25 for which the addresses specified do not match those associated with the connection.
                                           alcIStatsX25DiscardedMesgsBadHeader 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.33 counter read-only
The number of messages received by X.25 of which the IN header configured does not match the header present in the message.
                                           alcIStatsX25DiscardedMesgsTooLong 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.34 counter read-only
The number of messages received from X.25 that were discarded because they were longer than the allowable ALC maximum configured.
                                           alcIStatsALCDiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.35 counter read-only
The number of messages discarded because the ALC outbound message queue was full.
                                           alcIStatsX25DiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.36 counter read-only
The number of messages discarded because the X.25 outbound message queue was full.
                                           alcIStatsCurrTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.37 integer read-only
The number of messages currently queued in the ALC outbound message queue for transmission.
                                           alcIStatsCurrTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.38 integer read-only
The number of messages currently queued in the X.25 outbound message queue for transmission.
                                           alcIStatsMaxTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.39 integer read-only
The maximum (highwater mark) size of the ALC outbound queue so far.
                                           alcIStatsMaxTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.40 integer read-only
The maximum (highwater mark) size of the X.25 outbound queue so far.
                                   cdx6500PPSTALCTerminalTable 1.3.6.1.4.1.449.2.1.3.1.1.28.3 no-access
This table contains ALC Terminalinal Statistics parameters.
                                       cdx6500PPSTALCTerminalEntry 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1 no-access
Entries in the ALC Terminalinal Statistics Table.
                                           alcTStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.1 integer read-only
Port number of this port.
                                           alcTStatsInterchangeAddress 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.2 octet string read-only
The address of the interchange. Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used as line control characters.
                                           alcTStatsTerminalAddress 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.3 octet string read-only
Address identifying this terminal.
                                           alcTStatsConnState 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.4 integer read-only
Current state of the connection. online :The connection is available for data transfer. offline :The connection has been disabled by an operator. connecting:The ALP PAD is attempting to make the X.25 virtual circuit available for use. inactive :The inactivity timer has expired, so the virtual circuit has been dropped. Data received from ALC will cause the connection to be re-established. pending :The CSD option has been configured and the ALC entity is currently down; hence the ALP PAD has disabled the virtual circuit. na :Value not Available Enumeration: 'na': 100, 'inactive': 4, 'connecting': 3, 'online': 1, 'offline': 2, 'pending': 5.
                                           alcTStatsALCMesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.5 counter read-only
The number of messages received from ALC.
                                           alcTStatsALCMesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.6 counter read-only
The number of messages transmitted to ALC.
                                           alcTStatsX25MesgsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.7 counter read-only
The number of messages received from X.25.
                                           alcTStatsX25MesgsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.8 counter read-only
The number of messages transmitted to X.25.
                                           alcTStatsALCCharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.9 counter read-only
The number of characters received from ALC.
                                           alcTStatsALCCharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.10 counter read-only
The number of characters transmitted to ALC.
                                           alcTStatsX25CharsIn 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.11 counter read-only
The number of characters received from X.25.
                                           alcTStatsX25CharsOut 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.12 counter read-only
The number of characters transmitted to X.25.
                                           alcTStatsALCDiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.13 counter read-only
The number of messages received by ALC for which the destination entity is unable to process the data.
                                           alcTStatsX25DiscardedMesgsEntityDown 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.14 counter read-only
The number of messages received by X.25 for which the destination entity is unable to process the data.
                                           alcTStatsX25DiscardedMesgsBadALCAddr 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.15 counter read-only
The number of messages received from X.25 for which the addresses specified do not match those associated with the connection.
                                           alcTStatsX25DiscardedMesgsBadHeader 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.16 counter read-only
The number of messages received by X.25 of which the IN header configured does not match the header present in the message.
                                           alcTStatsX25DiscardedMesgsTooLong 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.17 counter read-only
The number of messages received from X.25 that were discarded because they were longer than the allowable ALC maximum configured.
                                           alcTStatsALCDiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.18 counter read-only
The number of messages discarded because the ALC outbound message queue was full.
                                           alcTStatsX25DiscardedMesgsQFull 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.19 counter read-only
The number of messages discarded because the X.25 outbound message queue was full.
                                           alcTStatsCurrTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.20 integer read-only
The number of messages currently queued in the ALC outbound message queue for transmission.
                                           alcTStatsCurrTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.21 integer read-only
The number of messages currently queued in the X.25 outbound message queue for transmission.
                                           alcTStatsMaxTxALCQSize 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.22 integer read-only
The maximum (highwater mark) size of the ALC outbound queue so far.
                                           alcTStatsMaxTxX25QSize 1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.23 integer read-only
The maximum (highwater mark) size of the X.25 outbound queue so far.
                 cdx6500Controls 1.3.6.1.4.1.449.2.1.4
                     cdx6500ContALC 1.3.6.1.4.1.449.2.1.4.10
                           cdx6500ContALCPortTable 1.3.6.1.4.1.449.2.1.4.10.1 no-access
This table contains ALC Port Control parameters.
                               cdx6500ContALCPortEntry 1.3.6.1.4.1.449.2.1.4.10.1.1 no-access
Entries in the ALC Port Control Table.
                                   alcPContPortNumber 1.3.6.1.4.1.449.2.1.4.10.1.1.1 integer no-access
ALC Port Number.
                                   alcPContPortBoot 1.3.6.1.4.1.449.2.1.4.10.1.1.2 integer read-write
Boots the specified ALC Port. boot - Boot the port. noBoot - Do not boot the port. Enumeration: 'boot': 1, 'noBoot': 2.
                                   alcPContPortEnable 1.3.6.1.4.1.449.2.1.4.10.1.1.3 integer read-write
Enables the specified ALC Port. enable - Enable the port. noEnable - Do not enable the port. Enumeration: 'noEnable': 2, 'enable': 1.
                                   alcPContPortDisable 1.3.6.1.4.1.449.2.1.4.10.1.1.4 integer read-write
Disables the specified ALC Port. disable - Disable the port. noDisable - Do not disable the port. Enumeration: 'noDisable': 2, 'disable': 1.
                           cdx6500ContALCInterchangeTable 1.3.6.1.4.1.449.2.1.4.10.2 no-access
This table contains ALC Interchange Control parameters.
                               cdx6500ContALCInterchangeEntry 1.3.6.1.4.1.449.2.1.4.10.2.1 no-access
Entries in the ALC Interchange Control Table.
                                   alcIContPortNumber 1.3.6.1.4.1.449.2.1.4.10.2.1.1 integer no-access
ALC Port Number.
                                   alcIContInterchangeAddress 1.3.6.1.4.1.449.2.1.4.10.2.1.2 octet string no-access
ALC Interchange address.
                                   alcIContInterchangeBoot 1.3.6.1.4.1.449.2.1.4.10.2.1.3 integer read-write
Boots the specified ALC Interchange. boot - Boot the interchange. noBoot - Do not boot the interchange. Enumeration: 'boot': 1, 'noBoot': 2.
                                   alcIContInterchangeEnable 1.3.6.1.4.1.449.2.1.4.10.2.1.4 integer read-write
Enables the specified ALC Interchange. enable - Enable the interchange. noEnable - Do not enable the interchange. Enumeration: 'noEnable': 2, 'enable': 1.
                                   alcIContInterchangeDisable 1.3.6.1.4.1.449.2.1.4.10.2.1.5 integer read-write
Disables the specified ALC Interchange. disable - Disable the interchange. noDisable - Do not disable the interchange. Enumeration: 'noDisable': 2, 'disable': 1.
                           cdx6500ContALCTerminalTable 1.3.6.1.4.1.449.2.1.4.10.3 no-access
This table contains ALC Terminal Control parameters.
                               cdx6500ContALCTerminalEntry 1.3.6.1.4.1.449.2.1.4.10.3.1 no-access
Entries in the ALC Terminal Control Table.
                                   alcTContPortNumber 1.3.6.1.4.1.449.2.1.4.10.3.1.1 integer no-access
ALC Port Number.
                                   alcTContInterchangeAddress 1.3.6.1.4.1.449.2.1.4.10.3.1.2 octet string no-access
ALC Interchange address.
                                   alcTContTerminalAddress 1.3.6.1.4.1.449.2.1.4.10.3.1.3 octet string no-access
Address identifying this terminal.
                                   alcTContTerminalBoot 1.3.6.1.4.1.449.2.1.4.10.3.1.4 integer read-write
Boots the specified ALC terminal. boot - Boot the terminal. noBoot - Do not boot the terminal. Enumeration: 'boot': 1, 'noBoot': 2.
                                   alcTContTerminalEnable 1.3.6.1.4.1.449.2.1.4.10.3.1.5 integer read-write
Enables the specified ALC Terminal. enable - Enable the terminal. noEnable - Do not enable the terminal. Enumeration: 'noEnable': 2, 'enable': 1.
                                   alcTContTerminalDisable 1.3.6.1.4.1.449.2.1.4.10.3.1.6 integer read-write
Disables the specified ALC terminal. disable - Disable the terminal. noDisable - Do not disable the terminal. Enumeration: 'noDisable': 2, 'disable': 1.