AISLCANALOG-MIB: View SNMP OID List / Download MIB

VENDOR: WESTELL INC.


 Home MIB: AISLCANALOG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 aii 1.3.6.1.4.1.539
         aiSLCAnalog 1.3.6.1.4.1.539.28
MIB module for SLCs with analog input points.
               aiSLCAnalogInputTable 1.3.6.1.4.1.539.28.1 no-access
Table of analog inputs points indexed by point number. Includes description, configuration and status information.
                   aiSLCAnalogInputEntry 1.3.6.1.4.1.539.28.1.1 no-access
Entry of aiSLCAnalogInputTable.
                       aislcainPointNumber 1.3.6.1.4.1.539.28.1.1.1 positiveinteger read-only
Input point number to which this table row applies.
                       aislcainScanningEnabled 1.3.6.1.4.1.539.28.1.1.2 integer read-write
Enable or disable scanning of the input. Enumeration: 'disabled': 2, 'enabled': 1.
                       aislcainDescription 1.3.6.1.4.1.539.28.1.1.3 displaystring read-write
Textual description of the point. Maximum length is 80 characters.
                       aislcainTrapEnable 1.3.6.1.4.1.539.28.1.1.4 integer read-write
Enable or disable alarm traps. Enumeration: 'disabled': 2, 'enabled': 1.
                       aislcainNormalStateTrap 1.3.6.1.4.1.539.28.1.1.5 integer read-write
If enabled, transitions from an alarm state to the normal state will generate an SNMP trap or TL1 message. Enumeration: 'disabled': 2, 'enabled': 1.
                       aislcainHighAlarmSeverity 1.3.6.1.4.1.539.28.1.1.6 integer read-write
Severity of the point's alarm state, or notReported(5) if the point does not generate an alarm. Enumeration: 'info': 4, 'notReported': 5, 'major': 2, 'critical': 1, 'minor': 3.
                       aislcainHighAlarmStateText 1.3.6.1.4.1.539.28.1.1.7 displaystring read-write
Textual description of the point's alarm state. Maximum length is 80 characters.
                       aislcainLowAlarmSeverity 1.3.6.1.4.1.539.28.1.1.8 integer read-write
Severity of the point's alarm state, or notReported(5) if the point does not generate an alarm. Enumeration: 'info': 4, 'notReported': 5, 'major': 2, 'critical': 1, 'minor': 3.
                       aislcainLowAlarmStateText 1.3.6.1.4.1.539.28.1.1.9 displaystring read-write
Textual description of the point's alarm state. Maximum length is 80 characters.
                       aislcainNormalStateText 1.3.6.1.4.1.539.28.1.1.10 displaystring read-write
Textual description of the point's normal state. Maximum length is 80 characters.
                       aislcainUserUnits 1.3.6.1.4.1.539.28.1.1.11 displaystring read-write
The user-defined units for this input (e.g. degC, degF, etc.).
                       aislcainMinInputmA 1.3.6.1.4.1.539.28.1.1.12 displaystring read-write
The current in mA corresponding to the minimum input in user-defined units.
                       aislcainMinInputuu 1.3.6.1.4.1.539.28.1.1.13 displaystring read-write
The minimum value in user-defined units corresponding to the minimum input in mA.
                       aislcainMaxInputmA 1.3.6.1.4.1.539.28.1.1.14 displaystring read-write
The current in mA corresponding to the maximum input in user-defined units.
                       aislcainMaxInputuu 1.3.6.1.4.1.539.28.1.1.15 displaystring read-write
The maximum value in user-defined units corresponding to the maximum input in mA.
                       aislcainHighLimitScan 1.3.6.1.4.1.539.28.1.1.16 integer read-write
If enabled, the high limit threshold will be checked when the input is scanned. Enumeration: 'disabled': 2, 'enabled': 1.
                       aislcainHighAlarmThresholduu 1.3.6.1.4.1.539.28.1.1.17 displaystring read-write
The high alarm level in user-defined units.
                       aislcainHighAlarmThresholdIntervaluu 1.3.6.1.4.1.539.28.1.1.18 displaystring read-write
The high alarm level threshold interval in user-defined units. When the high alarm is active, each time the input rises another interval higher, a new alarm is sent.
                       aislcainHighAlarmMinPeriod 1.3.6.1.4.1.539.28.1.1.19 integer read-write
The minimum number of seconds the input(s) should be energized when the input exceeds the high alarm threshold.
                       aislcainHighAlarmHysteresisuu 1.3.6.1.4.1.539.28.1.1.20 displaystring read-write
The amount by which the input must drop below the High Alarm Threshold before the High Alarm will be cleared.
                       aislcainLowLimitScan 1.3.6.1.4.1.539.28.1.1.21 integer read-write
If enabled, the low limit threshold will be checked when the input is scanned. Enumeration: 'disabled': 2, 'enabled': 1.
                       aislcainLowAlarmThresholduu 1.3.6.1.4.1.539.28.1.1.22 displaystring read-write
The low alarm level in user-defined units.
                       aislcainLowAlarmThresholdIntervaluu 1.3.6.1.4.1.539.28.1.1.23 displaystring read-write
The low alarm level threshold interval in user-defined units. When the low alarm is active, each time the input drops another interval lower, a new alarm is sent.
                       aislcainLowAlarmMinPeriod 1.3.6.1.4.1.539.28.1.1.24 integer read-write
The minimum number of seconds the input(s) should be energized when the input falls below the low alarm threshold.
                       aislcainLowAlarmHysteresisuu 1.3.6.1.4.1.539.28.1.1.25 displaystring read-write
The amount by which the input must rise above the Low Alarm Threshold before the Low Alarm will be cleared.
                       aislcainCurrentValueuu 1.3.6.1.4.1.539.28.1.1.26 displaystring read-only
The current input value in user-defined units.
                       aislcainCurrentValuemA 1.3.6.1.4.1.539.28.1.1.27 displaystring read-only
The current input value in mA.
                       aislcainLastChangeTime 1.3.6.1.4.1.539.28.1.1.28 displaystring read-only
Textural representation of the time of the most recent output change. 24-hour format YYYY-MM-DD HH:MM:SS.
                       aislcaintl1AccessID 1.3.6.1.4.1.539.28.1.1.29 displaystring read-write
Unique TL1 access identifier for this point. Maximum length is 22 characters.
                       aislcaintl1Provisioned 1.3.6.1.4.1.539.28.1.1.30 truthvalue read-write
Enable TL1 management of this point.
                       aislcaintl1AccessIDType 1.3.6.1.4.1.539.28.1.1.31 integer read-write
Identifies the point as either an equipment(1) alarm condition or an environmental(2) alarm. Enumeration: 'equipment': 1, 'environmental': 2.
                       aislcaintl1HighAlarmType 1.3.6.1.4.1.539.28.1.1.32 displaystring read-write
String indicating the type of alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 10 characters.
                       aislcaintl1HighAlarmMessage 1.3.6.1.4.1.539.28.1.1.33 displaystring read-write
Textual description of the alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 40 characters.
                       aislcaintl1LowAlarmType 1.3.6.1.4.1.539.28.1.1.34 displaystring read-write
String indicating the type of alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 10 characters.
                       aislcaintl1LowAlarmMessage 1.3.6.1.4.1.539.28.1.1.35 displaystring read-write
Textual description of the alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 40 characters.
                       aislcaintl1HighAlarmNotificationCode 1.3.6.1.4.1.539.28.1.1.36 integer read-write
Severity of the point's alarm state. Enumeration: 'major': 2, 'critical': 1, 'minor': 3.
                       aislcaintl1HighAlarmServiceAffecting 1.3.6.1.4.1.539.28.1.1.37 integer read-write
Indicates whether or not the alarm affects the functioning of the equipment. This is only meaningful when aislcaintl1AccessIDType is equipment(1). Enumeration: 'serviceAffecting': 1, 'notServiceAffecting': 2.
                       aislcaintl1HighAlarmConditionType 1.3.6.1.4.1.539.28.1.1.38 displaystring read-write
String indicating the type of alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 20 characters.
                       aislcaintl1HighAlarmConditionDesc 1.3.6.1.4.1.539.28.1.1.39 displaystring read-write
Textual description of the alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 64 characters.
                       aislcaintl1LowAlarmNotificationCode 1.3.6.1.4.1.539.28.1.1.40 integer read-write
Severity of the point's alarm state. Enumeration: 'major': 2, 'critical': 1, 'minor': 3.
                       aislcaintl1LowAlarmServiceAffecting 1.3.6.1.4.1.539.28.1.1.41 integer read-write
Indicates whether or not the alarm affects the functioning of the equipment. This is only meaningful when aislcaintl1AccessIDType is equipment(1). Enumeration: 'serviceAffecting': 1, 'notServiceAffecting': 2.
                       aislcaintl1LowAlarmConditionType 1.3.6.1.4.1.539.28.1.1.42 displaystring read-write
String indicating the type of alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 20 characters.
                       aislcaintl1LowAlarmConditionDesc 1.3.6.1.4.1.539.28.1.1.43 displaystring read-write
Textual description of the alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 64 characters.
                       aislcainAnalogStatus 1.3.6.1.4.1.539.28.1.1.44 integer read-only
The current alarm status of the analog input. Enumeration: 'lowLimitExceeded': 3, 'lossOfSignal': 4, 'highLimitExceeded': 2, 'saturated': 5, 'normal': 1.
                       aislcainCurrentStateText 1.3.6.1.4.1.539.28.1.1.45 displaystring read-only
Textual description of the point's current state. This is either aislcainNormalStateText or aislcainAlarmStateText.
                       aislcainAnalogAlarmState 1.3.6.1.4.1.539.28.1.1.46 integer read-only
The point's current alarm state, or normal(5). Enumeration: 'info': 4, 'major': 2, 'critical': 1, 'minor': 3, 'normal': 5.