AGENT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: AGENT-MIB
Download as:   
DLINK-ID-REC-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 agentGeneralMgmt 1.3.6.1.4.1.171.12.1
The Structure of Common Management Information for the D-Link enterprise.
     agentBasicInfo 1.3.6.1.4.1.171.12.1.1
         agentMgmtProtocolCapability 1.3.6.1.4.1.171.12.1.1.1 integer read-only
The network management protocol(s) supported by this agent. Enumeration: 'snmp-ip-ipx': 4, 'other': 1, 'snmp-ip': 2, 'snmp-ipx': 3.
         agentMibCapabilityTable 1.3.6.1.4.1.171.12.1.1.2 no-access
A list of MIB capability entries supported by this agent.
             agentMibCapabilityEntry 1.3.6.1.4.1.171.12.1.1.2.1 no-access
A MIB capability entry contains objects describing a particular MIB supported by this agent.
                 agentMibCapabilityIndex 1.3.6.1.4.1.171.12.1.1.2.1.1 integer32 read-only
A list of agentMibCapabilityDescr entries.
                 agentMibCapabilityDescr 1.3.6.1.4.1.171.12.1.1.2.1.2 displaystring read-only
The name of the MIB supported by the agent.
                 agentMibCapabilityVersion 1.3.6.1.4.1.171.12.1.1.2.1.3 integer32 read-only
The version of the MIB specified in this entry.
                 agentMibCapabilityType 1.3.6.1.4.1.171.12.1.1.2.1.4 integer read-only
The type of the MIB specified in this entry. Enumeration: 'other': 1, 'proprietary': 3, 'experiment': 4, 'standard': 2.
         agentStatusConsoleInUse 1.3.6.1.4.1.171.12.1.1.3 integer read-only
This indicates whether console is currently in-use. Enumeration: 'other': 1, 'in-use': 2, 'not-in-use': 3.
         agentStatusSaveCfg 1.3.6.1.4.1.171.12.1.1.4 integer read-only
This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is being currently saved into the NV-RAM. completed(3) V all of the device configuration parameters have been saved into NV-RAM. changed-not-save(4)V some of the device configuration parameters have been changed but not saved into NV-RAM. failed(5) - The process to save device configuration is failed. Enumeration: 'failed': 5, 'completed': 3, 'other': 1, 'proceeding': 2, 'changed-not-save': 4.
         agentStatusFileTransfer 1.3.6.1.4.1.171.12.1.1.5 integer read-only
status of firmware download control. If the value is 'other', means never firmware updated since device started up. Enumeration: 'invalid-file': 3, 'in-process': 2, 'complete': 7, 'not-format': 9, 'violation': 4, 'memory-full': 10, 'other': 1, 'file-not-found': 5, 'time-out': 8, 'disk-full': 6.
         agentPORTutilizationTable 1.3.6.1.4.1.171.12.1.1.8 no-access
This table specifies the current utilization of a specified port.
             agentPORTutilizationEntry 1.3.6.1.4.1.171.12.1.1.8.1 no-access
A list of information regarding the port utilization function.
                 agentPORTutilizationProtIndex 1.3.6.1.4.1.171.12.1.1.8.1.1 integer read-only
This object indicates the module's port number.
                 agentPORTutilizationTX 1.3.6.1.4.1.171.12.1.1.8.1.2 integer read-only
The current rate of transmitted frames on the specified port.
                 agentPORTutilizationRX 1.3.6.1.4.1.171.12.1.1.8.1.3 integer read-only
The current rate of received frames on the specified port.
                 agentPORTutilizationUtil 1.3.6.1.4.1.171.12.1.1.8.1.4 integer read-only
The current percentages regarding port statistics.
     agentBasicConfig 1.3.6.1.4.1.171.12.1.2
         agentBscSwFileTable 1.3.6.1.4.1.171.12.1.2.1 no-access
A list of MIB Basic Config entries supported file Update by this agent.
             agentBscSwFileEntry 1.3.6.1.4.1.171.12.1.2.1.1 no-access
A basic config entry contains objects describing a particular MIB supported by this agent.
                 agentBscSwFileIndex 1.3.6.1.4.1.171.12.1.2.1.1.1 integer32 read-write
The table index for the file entry
                 agentBscSwFileDscr 1.3.6.1.4.1.171.12.1.2.1.1.2 displaystring read-write
The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message.
                 agentBscSwFileAddr 1.3.6.1.4.1.171.12.1.2.1.1.3 ipaddress read-write
The IP address where the File to be downloaded is located, or the IP address where the file will be uploaded to.
                 agentBscSwFileTransferType 1.3.6.1.4.1.171.12.1.2.1.1.4 integer read-write
The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported channel will cause the system to return bad-value error message. Enumeration: 'out-of-band-load': 3, 'other': 1, 'network-load': 2.
                 agentBscSwFile 1.3.6.1.4.1.171.12.1.2.1.1.5 displaystring read-write
The name of the file to be downloaded from the TFTP server, or to be uploaded to.
                 agentBscSwFileLocateId 1.3.6.1.4.1.171.12.1.2.1.1.6 integer read-write
This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message.
                 agentBscSwFileLoadType 1.3.6.1.4.1.171.12.1.2.1.1.7 integer read-write
This object provides the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. Enumeration: 'download': 3, 'other': 1, 'upload': 2.
                 agentBscSwFileCtrl 1.3.6.1.4.1.171.12.1.2.1.1.8 integer read-write
This object provides the user to download runtime software. The setting will take effect when the system is restart. See Note(1) below Note: For system which does not support change of this object to some value, setting object to these values cause the system to return bad-value error message. Enumeration: 'inactive': 2, 'start': 3, 'other': 1, 'create-and-go': 5, 'delete': 4.
         agentFileTransfer 1.3.6.1.4.1.171.12.1.2.2 integer read-write
This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset as follow. If start-and-reset(3), then the reset will active after download or upload. No action if(4). Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. Enumeration: 'start': 2, 'other': 1, 'noaction': 4, 'start-and-reset': 3.
         agentSystemReset 1.3.6.1.4.1.171.12.1.2.3 integer read-write
This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read. Enumeration: 'other': 1, 'no-reset': 4, 'warm-start': 3, 'cold-start': 2.
         agentRs232PortConfig 1.3.6.1.4.1.171.12.1.2.4 integer read-write
This object indicates the RS-232C mode while device restart. Enumeration: 'notAvail': 4, 'other': 1, 'console': 2, 'out-of-band': 3.
         agentOutOfBandBaudRateConfig 1.3.6.1.4.1.171.12.1.2.5 integer read-write
This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. Enumeration: 'baudRate-9600': 3, 'baudRate-2400': 2, 'other': 1, 'baudRate-115200': 6, 'baudRate-38400': 5, 'baudRate-19200': 4.
         agentSaveCfg 1.3.6.1.4.1.171.12.1.2.6 integer read-write
This indicates the current device saving type will be saved into to NV-RAM. other(1) - none of the following. cfg(3) - save configuration. log(4) - save log. all(5) - save both ( active configuration & log). Enumeration: 'cfg': 3, 'all': 5, 'other': 1, 'log': 4.
         agentTrustHostMgmt 1.3.6.1.4.1.171.12.1.2.10
               agentTrustHostTable 1.3.6.1.4.1.171.12.1.2.10.1 no-access
This table contains Trust Host information.
                   agentTrustHostEntry 1.3.6.1.4.1.171.12.1.2.10.1.1 no-access
A list of information about Trust Host.
                       agentTrustHostIndex 1.3.6.1.4.1.171.12.1.2.10.1.1.1 integer read-only
The index of Trust Host entry.
                       agentTrustHostIPAddress 1.3.6.1.4.1.171.12.1.2.10.1.1.2 ipaddress read-only
Specifies the IP address of the Trust Host.
                       agentTrustHostRowStatus 1.3.6.1.4.1.171.12.1.2.10.1.1.3 rowstatus read-only
Indicates the status of this entry. When creating a Trust Host entry, the IP address should be set, too.
                       agentTrustHostIPSubnetMask 1.3.6.1.4.1.171.12.1.2.10.1.1.4 ipaddress read-only
Specifies the IP subnet mask of the Trust Host.
               agentTrustHostDelAllState 1.3.6.1.4.1.171.12.1.2.10.2 integer read-write
Used to delete all Trust Host entries. Enumeration: 'start': 2, 'none': 1.
         agentFDBMgmt 1.3.6.1.4.1.171.12.1.2.11
               agentFDBClearAllState 1.3.6.1.4.1.171.12.1.2.11.1 integer read-write
Used to clear all FDB entries. Enumeration: 'start': 2, 'other': 1.
         agentARPMgmt 1.3.6.1.4.1.171.12.1.2.12
               agentARPClearAllState 1.3.6.1.4.1.171.12.1.2.12.1 integer read-write
Used to clear all ARP entries. Enumeration: 'start': 2, 'other': 1.
     agentIpProtoConfig 1.3.6.1.4.1.171.12.1.3
         agentIpNumOfIf 1.3.6.1.4.1.171.12.1.3.1 integer32 read-only
The total number of IP interfaces supported by this agent.
         agentIpTftpServerAddr 1.3.6.1.4.1.171.12.1.3.2 ipaddress read-write
The IP Address of TFTP Server.
         agentIpGetIpFrom 1.3.6.1.4.1.171.12.1.3.3 integer read-write
This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. Enumeration: 'disabled': 2, 'dhcp': 4, 'other': 1, 'bootp': 3.
     agentConsoleModeManager 1.3.6.1.4.1.171.12.1.5
         agentConsoleModeManagerDataBits 1.3.6.1.4.1.171.12.1.5.1 integer read-write
The DataBits for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agentSlipModeManager group will deactive automatically. Enumeration: 'bits-8': 3, 'other': 1, 'bits-7': 2.
         agentConsoleModeManagerStopBits 1.3.6.1.4.1.171.12.1.5.2 integer read-write
The Stop Bits for console mode Enumeration: 'other': 1, 'stopbits-1': 2, 'stopbits-2': 3.
         agentConsoleModeManagerParity 1.3.6.1.4.1.171.12.1.5.3 integer read-write
The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agentSlipModeManager group will deactive automatically. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
         agentConsoleModeManagerBaudRate 1.3.6.1.4.1.171.12.1.5.4 integer read-write
The transmit rate for console mode. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. Enumeration: 'baudRate-115200': 7, 'baudRate-9600': 3, 'baudRate-57200': 6, 'baudRate-2400': 2, 'other': 1, 'baudRate-19200': 4, 'baudRate-38400': 5.
         agentConsoleModeManagerLogoutTime 1.3.6.1.4.1.171.12.1.5.5 integer read-write
The time period of auto logout. Enumeration: 'five-minutes': 3, 'two-minutes': 2, 'ten-minutes': 4, 'never': 1, 'fifteen-minutes': 5.