ADTRAN-DSUIQ-MIB: View SNMP OID List / Download MIB

VENDOR: ADTRAN


 Home MIB: ADTRAN-DSUIQ-MIB
Download as:   
SNMPv2-CONF, IF-MIB, ADTRAN-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 adDSUIQ 1.3.6.1.4.1.664.1.141
           adDSUIQNetworkPhysUp 1.3.6.1.4.1.664.1.1410.14101
This trap indicates that the physical layer of the network is now up.
           adDSUIQNetworkPhysDown 1.3.6.1.4.1.664.1.1410.14102
This trap indicates that the physical layer of the network is now down.
           adDSUIQNetworkLMIUp 1.3.6.1.4.1.664.1.1410.14103
This trap indicates that the LMI state of the network is now up.
           adDSUIQNetworkLMIDown 1.3.6.1.4.1.664.1.1410.14104
This trap indicates that the LMI state of the network is now down.
           adDSUIQColdStart 1.3.6.1.4.1.664.1.1410.14105
This trap indicates that a cold start has occurred.
 adDSUIQmg 1.3.6.1.4.1.664.2.141
         adDSUIQSystemConfig 1.3.6.1.4.1.664.2.141.1
             adDSUIQPassword 1.3.6.1.4.1.664.2.141.1.1 displaystring read-write
Sets the Telnet and Vt100 Terminal Control Password (10 characters maximum).
             adDSUIQTOD 1.3.6.1.4.1.664.2.141.1.2 displaystring read-write
Sets the Time of Day with the format hh:mm.
             adDSUIQDate 1.3.6.1.4.1.664.2.141.1.3 displaystring read-write
Sets the Date with format MM-DD-YY.
             adDSUIQIpAddress 1.3.6.1.4.1.664.2.141.1.4 ipaddress read-write
Sets the unit's IP Address.
             adDSUIQIpAddressMask 1.3.6.1.4.1.664.2.141.1.5 ipaddress read-write
Sets the unit's Subnet Mask.
             adDSUIQGatewayIpAddress 1.3.6.1.4.1.664.2.141.1.6 ipaddress read-write
Sets the Network's Gateway IP Address.
             adDSUIQTrapManagerIpAddress 1.3.6.1.4.1.664.2.141.1.7 ipaddress read-write
Sets the IP Address of the Trap Host Manager.
             adDSUIQTrapManagerDLCI 1.3.6.1.4.1.664.2.141.1.8 integer read-write
Sets the DLCI of the Trap Host Manager. (Range 16 - 1007).
             adDSUIQTrapManagerPort 1.3.6.1.4.1.664.2.141.1.9 integer read-write
Selects the Trap Manager Port. Enumeration: 'networkPort': 3, 'controlPort': 4, 'none': 1, 'ethernetPort': 5, 'dtePort': 2.
             adDSUIQControPortBaud 1.3.6.1.4.1.664.2.141.1.10 integer read-write
Selects the Control Port baud rate. Enumeration: 'bps19200': 2, 'bps38400': 3, 'bps9600': 1.
             adDSUIQControPortMode 1.3.6.1.4.1.664.2.141.1.11 integer read-write
Selects the Control Port protocol. Enumeration: 'terminal': 1, 'ppp': 3, 'slip': 2.
             adDSUIQEnableTraps 1.3.6.1.4.1.664.2.141.1.12 integer read-write
Overall trap enable/disable. Enumeration: 'disabled': 1, 'enabled': 2.
             adDSUIQAlarmState 1.3.6.1.4.1.664.2.141.1.13 integer read-only
This bit map variable indicates alarm conditions which are currently set. When an alarm condition occurs, the corresponding event bit is set in this variable. If armed, setting the event will generate an Alarm Trap. The various alarm event bit positions are: 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
             adDSUIQArmAlarm 1.3.6.1.4.1.664.2.141.1.14 integer read-write
This bit map variable arms or disarms an individual or group of events identified in adFradAlarmState as a source for generation of an Alarm Trap. The various arm event bit positions are : 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
             adDSUIQAbortConfig 1.3.6.1.4.1.664.2.141.1.15 integer read-write
A Set will cancel the current selections and revert to the last Saved configuration. Enumeration: 'abortConfig': 1.
             adDSUIQSaveConfig 1.3.6.1.4.1.664.2.141.1.16 integer read-write
A Set operation will reset the unit and save current selections. Enumeration: 'saveConfig': 1.
         adDSUIQNetPortConfig 1.3.6.1.4.1.664.2.141.2
             adDSUIQNetPortLoopRate 1.3.6.1.4.1.664.2.141.2.1 integer read-write
Selects the Rate for the DDS interface. Enumeration: 'bps64000': 2, 'bps56000': 1, 'auto': 3.
             adDSUIQNetPortClockSource 1.3.6.1.4.1.664.2.141.2.2 integer read-write
Selects the Timing source for the DDS interface. Enumeration: 'fromNetwork': 2, 'master': 1.
             adDSUIQNetPortSignaling 1.3.6.1.4.1.664.2.141.2.3 integer read-write
Signaling type for the frame relay management interface. Enumeration: 'conLMI': 2, 'ituTQ933A': 4, 'none': 1, 'ansiT1617D': 3, 'auto': 5.
             adDSUIQNetPortt391 1.3.6.1.4.1.664.2.141.2.4 integer read-write
Sets the polling interval in seconds for the frame relay management interface. (Range 5 - 30).
             adDSUIQNetPortn391 1.3.6.1.4.1.664.2.141.2.5 integer read-write
Sets the interval between full status polls for the frame relay management interface. (Range 1 - 255).
             adDSUIQNetPortn392 1.3.6.1.4.1.664.2.141.2.6 integer read-write
Sets the error count for the frame relay management interface. (Range 1 - 10).
             adDSUIQNetPortn393 1.3.6.1.4.1.664.2.141.2.7 integer read-write
Sets the error window (number of polling events)for the frame relay management interface. (Range 1 - 10).
             adDSUIQNetPortMgmtDlci1Mode 1.3.6.1.4.1.664.2.141.2.8 integer read-write
Sets the mode for the managent DLCI 1. If set for shared, management DLCI 1 is used for customer data and IQ management data. If set for dedicated, management DLCI 1 is used only for IQ management data and is not passed to the attached frame relay DTE device. Enumeration: 'shared': 1, 'dedicated': 2.
             adDSUIQNetPortMgmtDlci2Mode 1.3.6.1.4.1.664.2.141.2.9 integer read-write
Sets the mode for the managent DLCI 2. If set for shared, management DLCI 2 is used for customer data and IQ management data. If set for dedicated, management DLCI 2 is used only for IQ management data and is not passed to the attached frame relay DTE device. Enumeration: 'shared': 1, 'dedicated': 2.
             adDSUIQNetMgmtDlci1 1.3.6.1.4.1.664.2.141.2.10 integer read-write
Sets the DLCI for management PVC 1. (Range 16 - 1007).
             adDSUIQNetMgmtDlci2 1.3.6.1.4.1.664.2.141.2.11 integer read-write
Sets the DLCI for management PVC 2. (Range 16 - 1007).
             adDSUIQNetPortMaxPVCs 1.3.6.1.4.1.664.2.141.2.12 integer read-write
Sets the maxium PVCs supported by the IQ unit. (Range 1 - 100).
             adDSUIQNetPortHistIntervals 1.3.6.1.4.1.664.2.141.2.13 integer read-write
Sets the number of history intervals for storage.
             adDSUIQNetPortHistIntervalsAvailable 1.3.6.1.4.1.664.2.141.2.14 integer read-only
Returns the number of history intervals allowed based on the maxium number of PVCs selected.
         adDSUIQDtePortConfig 1.3.6.1.4.1.664.2.141.3
             adDSUIQDtePortInterface 1.3.6.1.4.1.664.2.141.3.1 integer read-write
Selects the DTE Port Interface type. Enumeration: 'rs232': 1, 'v35': 2.
             adDSUIQDtePortRate 1.3.6.1.4.1.664.2.141.3.2 integer read-write
Selects the DTE Port Rate. Enumeration: 'bps64000': 2, 'bps56000': 1.
             adDSUIQDteCTSOption 1.3.6.1.4.1.664.2.141.3.3 integer read-write
Selects the Clear to Send (CTS) option. Enumeration: 'forcedOn': 1, 'followRTS': 2.
             adDSUIQDteCDOption 1.3.6.1.4.1.664.2.141.3.4 integer read-write
Selects the Carrier Detect (CD) option. Enumeration: 'forcedOn': 1, 'normal': 2.
             adDSUIQDteDSROption 1.3.6.1.4.1.664.2.141.3.5 integer read-write
Selects the Data Set Ready (DSR) option. Enumeration: 'forcedOn': 1, 'normal': 2.
             adDSUIQDtePortMgmtDLCI 1.3.6.1.4.1.664.2.141.3.6 integer read-write
Sets the DTE Port Management DLCI. (Range 16 - 1007).
             adDSUIQDtePortt392 1.3.6.1.4.1.664.2.141.3.7 integer read-write
Sets the timeout in seconds between polling intervals. (Range 5 - 30).
             adDSUIQDtePortn392 1.3.6.1.4.1.664.2.141.3.8 integer read-write
Sets the number of error events for the frame relay management. (Range 1 - 10).
             adDSUIQDtePortn393 1.3.6.1.4.1.664.2.141.3.9 integer read-write
Sets the error window (polling events) for the frame relay management (Range 1 - 10).
             adDSUIQDteManagementPvcOption 1.3.6.1.4.1.664.2.141.3.10 integer read-write
Controls the presence of the DTE management PVC in a full status response to the DTE device. Enumeration: 'disabled': 2, 'enabled': 1.
             adDSUIQDteSignalingResponsesOption 1.3.6.1.4.1.664.2.141.3.11 integer read-write
Determines how the IQ device will respond to polls from the DTE device during a network failure. If set to always on, the IQ will respond to polls during a network failure. If set to follow network, the IQ will not respond thus emulating a failure to the DTE device. If the IQ is responsible for dial backup, this option should be set to always on. Enumeration: 'alwaysOn': 1, 'followsNetwork': 2.
             adDSUIQDteFlowControlOption 1.3.6.1.4.1.664.2.141.3.12 integer read-write
Determines how the IQ device will respond to congestion during DBU operation. If set for none, the IQ will drop frames during DBU operation when severe congestion occurs. If set for hardware, the IQ will vary the DTE TC clock in order to control the amount of data offered to the IQ when severe congestion occurs. FECN/BECN mode will set the FECN bit in outbound frames and set BECN bit for inbound frames leaving flow control up to the DTE devices. Enumeration: 'hardware': 2, 'none': 1, 'fECNBECN': 3.
         adDSUIQPvcConfig 1.3.6.1.4.1.664.2.141.4
             adDSUIQPvcConfigTable 1.3.6.1.4.1.664.2.141.4.1 no-access
n/a.
                 adDSUIQPvcConfigEntry 1.3.6.1.4.1.664.2.141.4.1.1 no-access
n/a
                     adDSUIQPvcConfigIndex 1.3.6.1.4.1.664.2.141.4.1.1.1 integer read-only
n/a.
                     adDSUIQPvcDLCI 1.3.6.1.4.1.664.2.141.4.1.1.2 integer read-write
Address for this PVC entry. (Range 16 - 1007).
                     adDSUIQPvcCIR 1.3.6.1.4.1.664.2.141.4.1.1.3 integer read-write
Commited Information Rate for this PVC in Kbps.
                     adDSUIQPvcSequenceOption 1.3.6.1.4.1.664.2.141.4.1.1.4 integer read-write
Sequence number allows the IQ to detect lost frames across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends. Enumeration: 'disabled': 1, 'enabled': 2.
                     adDSUIQPvcDelayPacketOption 1.3.6.1.4.1.664.2.141.4.1.1.5 integer read-write
Delay packet option for this PVC allows the IQ to sample round trip delay across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends. Enumeration: 'disabled': 1, 'enabled': 2.
                     adDSUIQPvcDBUDLCI 1.3.6.1.4.1.664.2.141.4.1.1.6 integer read-write
Used when this PVC entry is used for dial backup. This value should contain the PVC address as seen on the far end of the PVC.
                     adDSUIQPvcStatsControl 1.3.6.1.4.1.664.2.141.4.1.1.7 integer read-write
Stats Control option determines how the IQ will track statistics for this PVC entry. Auto will allow the IQ to track statistics for a PVC if enough memory is available. Enumeration: 'disabled': 3, 'auto': 1, 'enabled': 2.
         adDSUIQCurrentStatus 1.3.6.1.4.1.664.2.141.5
             adDSUIQDDSState 1.3.6.1.4.1.664.2.141.5.1 integer read-only
Current status of the DDS interface Enumeration: 'scanning': 7, 'outOfService-Frame': 4, 'normal64K': 2, 'noFrameSync': 5, 'openLoop': 3, 'noRXSignal': 8, 'dSUInTest': 6, 'checkTelcoCable': 9, 'normal56K': 1.
             adDSUIQDteControlLeads 1.3.6.1.4.1.664.2.141.5.2 integer read-only
This bit map integer reflects the current state of the DTE control leads as follows: bit meaning 0 CTS 1 RTS 2 DSR 3 DTR 4 DCD A 1 means the lead is on.
             adDSUIQDBUPortType 1.3.6.1.4.1.664.2.141.5.3 integer read-only
Returns the DBU card type installed. Enumeration: 'v34modem': 2, 'dce': 3, 'sw564wire': 4, 'empty': 1, 'sw562wire': 5, 'isdn': 6.
             adDSUIQLANPortStatus 1.3.6.1.4.1.664.2.141.5.4 integer read-only
Returns the LAN card type installed. Enumeration: 'ethernet': 2, 'empty': 1.
             adDSUIQLEDstatus 1.3.6.1.4.1.664.2.141.5.5 integer read-only
This bit map integer reflects DSUIQ front panel LED state as follows: bit meaning 0 TEST 1 ALARM 2 DCD 3 RD 4 TD 5 CTS 6 RTS
             adDSUIQDTESignalingState 1.3.6.1.4.1.664.2.141.5.6 integer read-only
Current state of the PVC signaling between the DSUIQ and the attached frame relay dte. Enumeration: 'down': 2, 'up': 1.
             adDSUIQNETSignalingState 1.3.6.1.4.1.664.2.141.5.7 integer read-only
Current state of the PVC signaling between the DSUIQ and the frame relay service. Enumeration: 'down': 2, 'up': 1.
             adDSUIQNETPVCCount 1.3.6.1.4.1.664.2.141.5.8 integer read-only
Current count of network pvcs.
             adDSUIQNETPVCConfigTableSize 1.3.6.1.4.1.664.2.141.5.9 integer read-only
Current count of rows in the PVC config table.
             adDSUIQDBUState 1.3.6.1.4.1.664.2.141.5.10 integer read-only
Current state of the DBU interface. Enumeration: 'connect4d8R': 37, 'ringing': 12, 'sPIDOK': 5, 'inDBU': 7, 'waitingPasscode': 50, 'connect33d6': 25, 'connect4d8': 47, 'tEIOK': 4, 'dialingNumber4': 17, 'connect57d6R': 33, 'connect115d2R': 27, 'busy': 22, 'connect2d4': 48, 'noRXSignal': 11, 'connect19d2R': 35, 'noAnswer': 21, 'noDialTone': 20, 'dialingNumber5': 18, 'anserwingCall': 19, 'connect115d2': 28, 'dialingNumber1': 14, 'dialingNumber3': 16, 'dialingNumber2': 15, 'waitingToDial': 23, 'connect38d4R': 34, 'connect38d4': 44, 'invalidPasscode': 51, 'connect21d6': 32, 'gettingTEI': 3, 'connect7d2': 42, 'connect12d0': 41, 'noSealingCurrent': 9, 'validPasscode': 52, 'waitingForCall': 8, 'connect14d4': 40, 'connect19d2': 45, 'connect28d8': 29, 'dialing': 13, 'connect9d6R': 36, 'connect24d0': 31, 'outOfService': 10, 'connect26d4': 30, 'connect31d2': 26, 'connect57d6': 43, 'openLoop': 2, 'connect9d6': 46, 'emptySlot': 1, 'sendingPasscode': 49, 'idle': 6, 'error': 53, 'connect16d8': 39, 'connect2d4R': 38, 'connect': 24.
         adDSUIQIntDDSStatus 1.3.6.1.4.1.664.2.141.6
             adDSUIQIntDDSStatusTable 1.3.6.1.4.1.664.2.141.6.1 no-access
n/a.
                 adDSUIQIntDDSStatusEntry 1.3.6.1.4.1.664.2.141.6.1.1 no-access
n/a
                     adDSUIQIntDDSSlotIndex 1.3.6.1.4.1.664.2.141.6.1.1.1 integer read-only
n/a.
                     adDSUIQIntDDSUnavailableTime 1.3.6.1.4.1.664.2.141.6.1.1.2 counter read-only
Amount of time in seconds the DDS port is unavailable due to test or in an inactive state.
                     adDSUIQIntDDSStateChange 1.3.6.1.4.1.664.2.141.6.1.1.3 counter read-only
Number of changes in the DDS port state. This includes all normal, inactive, and test state transitions.
                     adDSUIQIntDDSBPVFrameError 1.3.6.1.4.1.664.2.141.6.1.1.4 counter read-only
Number of BPVs received when the DDS is set for 56K mode or the number of DDS framing errors when the DDS is set for 64K mode.
         adDSUIQDayDDSStatus 1.3.6.1.4.1.664.2.141.7
             adDSUIQDayDDSStatusTable 1.3.6.1.4.1.664.2.141.7.1 no-access
n/a.
                 adDSUIQDayDDSStatusEntry 1.3.6.1.4.1.664.2.141.7.1.1 no-access
n/a
                     adDSUIQDayDDSSlotIndex 1.3.6.1.4.1.664.2.141.7.1.1.1 integer read-only
n/a.
                     adDSUIQDayDDSUnavailableTime 1.3.6.1.4.1.664.2.141.7.1.1.2 counter read-only
Amount of time in seconds the DDS port is unavailable due to test or in an inactive state.
                     adDSUIQDayDDSStateChange 1.3.6.1.4.1.664.2.141.7.1.1.3 counter read-only
Number of changes in the DDS port state. This includes all normal, inactive, and test state transitions.
                     adDSUIQDayDDSBPVFrameError 1.3.6.1.4.1.664.2.141.7.1.1.4 counter read-only
Number of BPVs received when the DDS is set for 56K mode or the number of DDS framing errors when the DDS is set for 64K mode.
         adDSUIQDiagnostic 1.3.6.1.4.1.664.2.141.8
             adDSUIQDiagnosticTable 1.3.6.1.4.1.664.2.141.8.1 no-access
n/a.
                 adDSUIQDiagnosticEntry 1.3.6.1.4.1.664.2.141.8.1.1 no-access
n/a
                     adDSUIQDiagnosticIndex 1.3.6.1.4.1.664.2.141.8.1.1.1 integer read-only
n/a.
                     adDSUIQDiagnosticDlci 1.3.6.1.4.1.664.2.141.8.1.1.2 integer read-only
Sets the DLCI for PVC Loopback. (Range 16 - 1007).
                     adDSUIQDiagnosticControl 1.3.6.1.4.1.664.2.141.8.1.1.3 integer read-write
Starts or Stops PVC Loopback Test. Enumeration: 'control': 1.
                     adDSUIQDiagnosticDuration 1.3.6.1.4.1.664.2.141.8.1.1.4 integer read-write
Sets the Length of the PVC Loopback in minutes.
                     adDSUIQDiagnosticStatus 1.3.6.1.4.1.664.2.141.8.1.1.5 integer read-write
PVC Loopback Test Status. (Active/Inactive). Enumeration: 'diagnosticOff': 1, 'diagnosticOn': 2.
                     adDSUIQDiagnosticSecondsRemaining 1.3.6.1.4.1.664.2.141.8.1.1.6 integer read-only
PVC Loopback Test time remaining in seconds.
                     adDSUIQDiagnosticFramesTx 1.3.6.1.4.1.664.2.141.8.1.1.7 counter read-only
Diagnostic Frames transmitted.
                     adDSUIQDiagnosticFramesRx 1.3.6.1.4.1.664.2.141.8.1.1.8 counter read-only
Diagnostic Frames received.
                     adDSUIQDiagnosticLostFrames 1.3.6.1.4.1.664.2.141.8.1.1.9 counter read-only
Diagnostic Frames Lost.
                     adDSUIQDiagnosticMaxDelay 1.3.6.1.4.1.664.2.141.8.1.1.10 gauge read-only
Diagnostic Maximum Delay measurement.
                     adDSUIQDiagnosticMinDelay 1.3.6.1.4.1.664.2.141.8.1.1.11 gauge read-only
Diagnostic Minimum Delay measurement.
                     adDSUIQDiagnosticAvgDelay 1.3.6.1.4.1.664.2.141.8.1.1.12 gauge read-only
Diagnostic Average Delay measurement.
         adDSUIQDBUConfig 1.3.6.1.4.1.664.2.141.9
             adDSUIQDBUOption 1.3.6.1.4.1.664.2.141.9.1 integer read-write
This option specifies whether the unit automatically enters dial backup mode or waits for manual setup. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUStartLockout 1.3.6.1.4.1.664.2.141.9.2 integer read-write
This option selects the hour to begin disabling dial backup operation when daily or weekend lockout mode is active.
             adDSUIQDBUEndLockout 1.3.6.1.4.1.664.2.141.9.3 integer read-write
This option selects the hour to end dial backup lockout when daily or weekend lockout mode is active.
             adDSUIQDBUMode 1.3.6.1.4.1.664.2.141.9.4 integer read-write
This option specifies the dial backup operating mode for the unit as orginate or answer. One end must be set to originate and the other end to answer. Enumeration: 'answer': 1, 'originate': 2.
             adDSUIQDBUOOS 1.3.6.1.4.1.664.2.141.9.5 integer read-write
This option enables the unit to enter backup mode if an out-of-service condition is detected from the network. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUNoRx 1.3.6.1.4.1.664.2.141.9.6 integer read-write
This option enables the unit to enter backup mode when a loss of receive signal is detected from the network. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUNoSealCurr 1.3.6.1.4.1.664.2.141.9.7 integer read-write
This option enables the unit to enter backup mode when a loss of sealing current is detected from the network. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUNoLMI 1.3.6.1.4.1.664.2.141.9.8 integer read-write
This option enables the unit to enter backup mode when network PVC signaling state goes down. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQAutoRestoreTimer 1.3.6.1.4.1.664.2.141.9.9 integer read-write
This option selects the amount of time that the DSUIQ circuit must be active before the unit switches from backup to normal mode of operation. The timer value is in minutes from 0 to 60. A zero value disables automatic restore, DSUIQ operation must be restored manually.
             adDSUIQRedialCount 1.3.6.1.4.1.664.2.141.9.10 integer read-write
This option allows the selection of the number of times the unit will redial the Far End unit when attempting to go to backup and a busy or reorder condition occurs. Redial count can be set for a maximum of 60.
             adDSUIQDBUFailTimeout 1.3.6.1.4.1.664.2.141.9.11 integer read-write
This option allows the selection of the amount of time that the dedicated circuit failure condition is active before attempting to enter dial backup mode. The Fail Timeout value is in increments of 10 seconds up to a maximum of 600 seconds.
             adDSUIQDBURedialTimer 1.3.6.1.4.1.664.2.141.9.12 integer read-write
This option works in conjunction with the Redial Counter option. The Redial Timer specifies the amount of time between redial attempts. The Redial Timer value is seconds, up to a maximum of 60 seconds.
             adDSUIQDBUPassCheck 1.3.6.1.4.1.664.2.141.9.13 integer read-write
This option allows the unit to send and verify a dial backup passcode for an additional level of security. When enabled, the originate unit sends the passcode and the answer unit checks the passcode before the backup connection is considered valid. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUPassCode 1.3.6.1.4.1.664.2.141.9.14 displaystring read-write
This option sets the dial backup passcode used to provide an additional level of security. A passcode of one to ten digit characters can be set. If enabled, the originate unit sends the passcode and the answer unit checks the passcode to verify the connection.
             adDSUIQWeekendLockout 1.3.6.1.4.1.664.2.141.9.15 integer read-write
This option enables or disables Weekend Lockout for Dial Backup operation. If enabled, no backup will occur from midnight Friday to midnight Sunday. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDailyLockout 1.3.6.1.4.1.664.2.141.9.16 integer read-write
This option enables or disables Daily Lockout for Dial Backup operation. If enabled, no backup will occur between Lockout Start hour and Lockout End hour. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQAnswerAlways 1.3.6.1.4.1.664.2.141.9.17 integer read-write
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQBeeperOption 1.3.6.1.4.1.664.2.141.9.18 integer read-write
This option enables or disables the audible alarm when the IQ unit goes into dial backup mode. Enumeration: 'enable': 2, 'disable': 1.
             adDSUIQDBUPhoneNumber1 1.3.6.1.4.1.664.2.141.9.19 displaystring read-write
This option is used to set a phone number to place a DBU call.
             adDSUIQDBUPhoneNumber2 1.3.6.1.4.1.664.2.141.9.20 displaystring read-write
This option is used to set a phone number to place a DBU call.
             adDSUIQDBUPhoneNumber3 1.3.6.1.4.1.664.2.141.9.21 displaystring read-write
This option is used to set a phone number to place a DBU call.
             adDSUIQDBUPhoneNumber4 1.3.6.1.4.1.664.2.141.9.22 displaystring read-write
This option is used to set a phone number to place a DBU call.
             adDSUIQDBUPhoneNumber5 1.3.6.1.4.1.664.2.141.9.23 displaystring read-write
This option is used to set a phone number to place a DBU call.
             adDSUIQDBUISDNSwitch 1.3.6.1.4.1.664.2.141.9.24 integer read-write
This option is used to select the ISDN switch type. Enumeration: 'nt-dms-100': 2, 'att-5ess': 1, 'national-isdn1': 3.
             adDSUIQDBUISDNBChannelRate 1.3.6.1.4.1.664.2.141.9.25 integer read-write
This option is used to select the ISDN channel rate. Enumeration: 'bps64000': 2, 'bps56000': 1.
             adDSUIQDBUISDNSPID 1.3.6.1.4.1.664.2.141.9.26 displaystring read-write
This option is used to set the SPID for the ISDN interface.
             adDSUIQDBUISDNLDN 1.3.6.1.4.1.664.2.141.9.27 displaystring read-write
This option is used to set LDN for the ISDN interface.
             adDSUIQV34LineType 1.3.6.1.4.1.664.2.141.9.28 integer read-write
This option selects the type of analog phone line. Enumeration: 'tone': 1, 'pulse': 2.
             adDSUIQDCEInterfaceType 1.3.6.1.4.1.664.2.141.9.29 integer read-write
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions. Enumeration: 'rs232': 1, 'v35': 2.
             adDSUIQDCEBitRate 1.3.6.1.4.1.664.2.141.9.30 integer read-write
This option is uses for utilization measurement of the DBU port when an external DCE device is used. Set this parameter in KBPS close to the connection rate.
         adDSUIQIntDBUStatus 1.3.6.1.4.1.664.2.141.10
               adDSUIQIntDBUStatusTable 1.3.6.1.4.1.664.2.141.10.1 no-access
n/a.
                   adDSUIQIntDBUStatusEntry 1.3.6.1.4.1.664.2.141.10.1.1 no-access
n/a
                       adDSUIQIntDBUSlotIndex 1.3.6.1.4.1.664.2.141.10.1.1.1 integer read-only
n/a.
                       adDSUIQIntDBUFramesRx 1.3.6.1.4.1.664.2.141.10.1.1.2 counter read-only
The number of Frames the Port received for the interval.
                       adDSUIQIntDBUFramesTx 1.3.6.1.4.1.664.2.141.10.1.1.3 counter read-only
The number of Frames the Port transmitted for the interval.
                       adDSUIQIntDBUBytesRx 1.3.6.1.4.1.664.2.141.10.1.1.4 counter read-only
The number of Bytes the Port received for the interval.
                       adDSUIQIntDBUBytesTx 1.3.6.1.4.1.664.2.141.10.1.1.5 counter read-only
The number of Bytes the Port transmitted for the interval.
                       adDSUIQIntDBUAvgThruputTx 1.3.6.1.4.1.664.2.141.10.1.1.6 gauge read-only
The Average Throughput the Port transmitted for the interval.
                       adDSUIQIntDBUAvgThruputRx 1.3.6.1.4.1.664.2.141.10.1.1.7 gauge read-only
The Average Throughput the Port received for the interval.
                       adDSUIQIntDBUMaxThruputTx 1.3.6.1.4.1.664.2.141.10.1.1.8 counter read-only
The Maximum Throughput the Port transmitted for the interval.
                       adDSUIQIntDBUMaxThruputRx 1.3.6.1.4.1.664.2.141.10.1.1.9 counter read-only
The Maximum Throughput the Port received for the interval.
                       adDSUIQIntDBUAvgUtilizationTx 1.3.6.1.4.1.664.2.141.10.1.1.10 gauge read-only
The Average Utilization the Port transmitted for the interval.
                       adDSUIQIntDBUAvgUtilizationRx 1.3.6.1.4.1.664.2.141.10.1.1.11 gauge read-only
The Average Utilization the Port received for the interval.
                       adDSUIQIntDBUMaxUtilizationTx 1.3.6.1.4.1.664.2.141.10.1.1.12 counter read-only
The Maximum Utilization the Port transmitted for the interval.
                       adDSUIQIntDBUMaxUtilizationRx 1.3.6.1.4.1.664.2.141.10.1.1.13 counter read-only
The Maximum Utilization the Port received for the interval.
                       adDSUIQIntTimeInDBU 1.3.6.1.4.1.664.2.141.10.1.1.14 counter read-only
Time in seconds the DBU port was active.
                       adDSUIQIntDBUCrcErrors 1.3.6.1.4.1.664.2.141.10.1.1.15 counter read-only
Number of frames received with CRC errors.
                       adDSUIQIntDBUAbortFrames 1.3.6.1.4.1.664.2.141.10.1.1.16 counter read-only
Number of frames received without proper flag termination.
                       adDSUIQIntDBUOctectViolations 1.3.6.1.4.1.664.2.141.10.1.1.17 counter read-only
Number of frames received with a bit count not divisible by eigth.
                       adDSUIQIntDBUDiscardFrames 1.3.6.1.4.1.664.2.141.10.1.1.18 counter read-only
Number of frames discarded by the IQ unit
                       adDSUIQIntDBULengthErrors 1.3.6.1.4.1.664.2.141.10.1.1.19 counter read-only
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
                       adDSUIQIntDBUEncapsulationErrors 1.3.6.1.4.1.664.2.141.10.1.1.20 counter read-only
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
                       adDSUIQIntDBUUnroutable 1.3.6.1.4.1.664.2.141.10.1.1.21 counter read-only
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
         adDSUIQDayDBUStatus 1.3.6.1.4.1.664.2.141.11
               adDSUIQDayDBUStatusTable 1.3.6.1.4.1.664.2.141.11.1 no-access
n/a.
                   adDSUIQDayDBUStatusEntry 1.3.6.1.4.1.664.2.141.11.1.1 no-access
n/a
                       adDSUIQDayDBUSlotIndex 1.3.6.1.4.1.664.2.141.11.1.1.1 integer read-only
n/a.
                       adDSUIQDayDBUFramesRx 1.3.6.1.4.1.664.2.141.11.1.1.2 counter read-only
The number of Frames the Port received for the interval.
                       adDSUIQDayDBUFramesTx 1.3.6.1.4.1.664.2.141.11.1.1.3 counter read-only
The number of Frames the Port transmitted for the interval.
                       adDSUIQDayDBUBytesRx 1.3.6.1.4.1.664.2.141.11.1.1.4 counter read-only
The number of Bytes the Port received for the interval.
                       adDSUIQDayDBUBytesTx 1.3.6.1.4.1.664.2.141.11.1.1.5 counter read-only
The number of Bytes the Port transmitted for the interval.
                       adDSUIQDayDBUAvgThruputTx 1.3.6.1.4.1.664.2.141.11.1.1.6 gauge read-only
The Average Throughput the Port transmitted for the interval.
                       adDSUIQDayDBUAvgThruputRx 1.3.6.1.4.1.664.2.141.11.1.1.7 gauge read-only
The Average Throughput the Port received for the interval.
                       adDSUIQDayDBUMaxThruputTx 1.3.6.1.4.1.664.2.141.11.1.1.8 counter read-only
The Maximum Throughput the Port transmitted for the interval.
                       adDSUIQDayDBUMaxThruputRx 1.3.6.1.4.1.664.2.141.11.1.1.9 counter read-only
The Maximum Throughput the Port received for the interval.
                       adDSUIQDayDBUAvgUtilizationTx 1.3.6.1.4.1.664.2.141.11.1.1.10 gauge read-only
The Average Utilization the Port transmitted for the interval.
                       adDSUIQDayDBUAvgUtilizationRx 1.3.6.1.4.1.664.2.141.11.1.1.11 gauge read-only
The Average Utilization the Port received for the interval.
                       adDSUIQDayDBUMaxUtilizationTx 1.3.6.1.4.1.664.2.141.11.1.1.12 counter read-only
The Maximum Utilization the Port transmitted for the interval.
                       adDSUIQDayDBUMaxUtilizationRx 1.3.6.1.4.1.664.2.141.11.1.1.13 counter read-only
The Maximum Utilization the Port received for the interval.
                       adDSUIQDayTimeInDBU 1.3.6.1.4.1.664.2.141.11.1.1.14 counter read-only
Time in seconds the DBU port was active.
                       adDSUIQDayDBUCrcErrors 1.3.6.1.4.1.664.2.141.11.1.1.15 counter read-only
Number of frames received with CRC errors.
                       adDSUIQDayDBUAbortFrames 1.3.6.1.4.1.664.2.141.11.1.1.16 counter read-only
Number of frames received without proper flag termination.
                       adDSUIQDayDBUOctectViolations 1.3.6.1.4.1.664.2.141.11.1.1.17 counter read-only
Number of frames received with a bit count not divisible by eigth.
                       adDSUIQDayDBUDiscardFrames 1.3.6.1.4.1.664.2.141.11.1.1.18 counter read-only
Number of frames discarded by the IQ unit
                       adDSUIQDayDBULengthErrors 1.3.6.1.4.1.664.2.141.11.1.1.19 counter read-only
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
                       adDSUIQDayDBUEncapsulationErrors 1.3.6.1.4.1.664.2.141.11.1.1.20 counter read-only
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
                       adDSUIQDayDBUUnroutable 1.3.6.1.4.1.664.2.141.11.1.1.21 counter read-only
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
         adDSUIQTrapManager 1.3.6.1.4.1.664.2.141.12
               adDSUIQTrapManagerTable 1.3.6.1.4.1.664.2.141.12.1 no-access
The trap manger route table.
                   adDSUIQTrapManagerEntry 1.3.6.1.4.1.664.2.141.12.1.1 no-access
n/a
                       adDSUIQTrapManagerRouteIndex 1.3.6.1.4.1.664.2.141.12.1.1.1 integer read-only
n/a.
                       adDSUIQTrapManagerRouteIPAddress 1.3.6.1.4.1.664.2.141.12.1.1.2 ipaddress read-write
Sets the Trap Manager IP Address.
                       adDSUIQTrapManagerRouteDLCI 1.3.6.1.4.1.664.2.141.12.1.1.3 integer read-write
Sets the Trap Manager DLCI. (Range 16 - 1007).
                       adDSUIQTrapManagerRoutePort 1.3.6.1.4.1.664.2.141.12.1.1.4 integer read-write
Selects the Trap Manager Port. Enumeration: 'networkPort': 3, 'controlPort': 4, 'none': 1, 'ethernetPort': 5, 'dtePort': 2.