ADTRAN-DS1-MIB: View SNMP OID List / Download MIB

VENDOR: ADTRAN


 Home MIB: ADTRAN-DS1-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 adtran 1.3.6.1.4.1.664
         adMgmt 1.3.6.1.4.1.664.2
             adDS1mg 1.3.6.1.4.1.664.2.3
                 adDS1AlarmTable 1.3.6.1.4.1.664.2.3.1 no-access
The DS1 Alarm Event Table.
                     adDS1AlarmEntry 1.3.6.1.4.1.664.2.3.1.1 no-access
An entry in the DS1 Alarm Event Table.
                         adDS1AlarmIndex 1.3.6.1.4.1.664.2.3.1.1.1 integer read-only
The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified by dsx1LineIndex in DS1 MIB.
                         adDS1AlarmEnable 1.3.6.1.4.1.664.2.3.1.1.2 integer read-write
Enables or disables the generation of DS1 Alarm Traps for Line Status event changes. Enumeration: 'ds1AlarmOFF': 1, 'ds1AlarmON': 2.
                         adDS1LineEvent 1.3.6.1.4.1.664.2.3.1.1.3 integer read-only
This bit map variable indicates state changes in the DS1 line status variable (dsx1LineStatus). When a line status bit changes state, the corresponding line event bit is set in this variable. If armed, setting the event will generate an Alarm Trap. After reporting the events in an Alarm Trap or Get response, the device clears the reported events. The various alarm event bit positions are: 1 No Alarm Present 2 Far end LOF ( a.k.a., Yellow Alarm ) 4 Near end sending LOF Indication 8 Far end sending AIS ( Blue Alarm ) 16 Near end sending AIS 32 Near end LOF ( a.k.a., Red Alarm ) 64 Near end Loss Of Signal 128 Near end is looped 256 E1 TS16 AIS 512 Far End Sending TS16 LOMF 1024 Near End Sending TS16 LOMF 2048 Near End detects a test code 4096 any line status not defined here
                         adDS1LineArm 1.3.6.1.4.1.664.2.3.1.1.4 integer read-write
This bit map variable arms or disarms an individual or group of events identified in adDS1LineEvent as a source for generation of DS1 Alarm Trap. The various arm event bit positions are: 1 No Alarm Present 2 Far end LOF ( a.k.a., Yellow Alarm ) 4 Near end sending LOF Indication 8 Far end sending AIS ( Blue Alarm ) 16 Near end sending AIS 32 Near end LOF ( a.k.a., Red Alarm ) 64 Near end Loss Of Signal 128 Near end is looped 256 E1 TS16 AIS 512 Far End Sending TS16 LOMF 1024 Near End Sending TS16 LOMF 2048 Near End detects a test code 4096 any line status not defined here
                 adDS1AlertTable 1.3.6.1.4.1.664.2.3.2 no-access
The DS1 Alert Event Table.
                     adDS1AlertEntry 1.3.6.1.4.1.664.2.3.2.1 no-access
An entry in the DS1 Alert Event Table.
                         adDS1AlertIndex 1.3.6.1.4.1.664.2.3.2.1.1 integer read-only
The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified by dsx1LineIndex in DS1 MIB.
                         adDS1AlertEnable 1.3.6.1.4.1.664.2.3.2.1.2 integer read-write
Enables or disables the generation of DS1 Alert Traps for Performance Monitor Threshold Crossing Alerts. Enumeration: 'ds1AlertON': 2, 'ds1AlertOFF': 1.
                         adDS1CurrentAlert 1.3.6.1.4.1.664.2.3.2.1.3 integer read-only
This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Current 15 minute interval. An alert bit is set in this variable when the value of the dsx1CurrentTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
                         adDS1TotalAlert 1.3.6.1.4.1.664.2.3.2.1.4 integer read-only
This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Total performance variables. An alert bit is set in this variable when the value of the dsx1TotalTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
                         adDS1FarCurrentAlert 1.3.6.1.4.1.664.2.3.2.1.5 integer read-only
This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Current 15 minute interval. An alert bit is set in this variable when the value of the dsx1FarEndCurrentTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
                         adDS1FarTotalAlert 1.3.6.1.4.1.664.2.3.2.1.6 integer read-only
This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Total performance variables. An alert bit is set in this variable when the value of the dsx1FarEndTotalTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
                         adDS1CurrentArm 1.3.6.1.4.1.664.2.3.2.1.7 integer read-write
This variable arms and disarms an individual or group of alerts identified in adDS1CurrentAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 512 LCV - Line Code Violations
                         adDS1TotalArm 1.3.6.1.4.1.664.2.3.2.1.8 integer read-write
This variable arms and disarms an individual or group of alerts identified in adDS1TotalAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 512 LCV - Line Code Violations
                         adDS1FarCurrentArm 1.3.6.1.4.1.664.2.3.2.1.9 integer read-write
This variable arms and disarms an individual or group of alerts identified in adDS1FarCurrentAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
                         adDS1FarTotalArm 1.3.6.1.4.1.664.2.3.2.1.10 integer read-write
This variable arms and disarms an individual or group of alerts identified in adDS1FarTotalAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
                 adDS1CurrentThreshold 1.3.6.1.4.1.664.2.3.3
                     adDS1CurrentThrsES 1.3.6.1.4.1.664.2.3.3.1 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Errored Seconds parameter. The default value is 65 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsSES 1.3.6.1.4.1.664.2.3.3.2 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsSEFS 1.3.6.1.4.1.664.2.3.3.3 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Framing Seconds parameter. The default value is 2 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsUAS 1.3.6.1.4.1.664.2.3.3.4 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsCSS 1.3.6.1.4.1.664.2.3.3.5 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Controlled Slip Seconds parameter. The default value is 1 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsPCVsf 1.3.6.1.4.1.664.2.3.3.6 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. Default value for an approximate BER level of (10**-5) is 72 Framing errors.
                     adDS1CurrentThrsPCVesf 1.3.6.1.4.1.664.2.3.3.7 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. Default value for an approximate BER level of (10**-5) is 13,296 CRC errors.
                     adDS1CurrentThrsLES 1.3.6.1.4.1.664.2.3.3.8 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Line Errored Seconds parameter. The default value is 65 for an approximate BER level of (10** -5).
                     adDS1CurrentThrsLCV 1.3.6.1.4.1.664.2.3.3.9 integer read-write
The DS1 performance monitor Threshold Value for the Current 15 minute Line Code Violations parameter. The default value is 13,340 for an approximate BER level of (10** -5).
                 adDS1TotalThreshold 1.3.6.1.4.1.664.2.3.4
                     adDS1TotalThrsES 1.3.6.1.4.1.664.2.3.4.1 integer read-write
The DS1 performance monitor Threshold Value for the Total Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5).
                     adDS1TotalThrsSES 1.3.6.1.4.1.664.2.3.4.2 integer read-write
The DS1 performance monitor Threshold Value for the Total Severely Errored Seconds parameter. The default value is 100 for an approximate BER level of (10** -5).
                     adDS1TotalThrsSEFS 1.3.6.1.4.1.664.2.3.4.3 integer read-write
The DS1 performance monitor Threshold Value for the Total Severely Errored Framing Seconds parameter. The default value is 17 for an approximate BER level of (10** -5).
                     adDS1TotalThrsUAS 1.3.6.1.4.1.664.2.3.4.4 integer read-write
The DS1 performance monitor Threshold Value for the Total Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
                     adDS1TotalThrsCSS 1.3.6.1.4.1.664.2.3.4.5 integer read-write
The DS1 performance monitor Threshold Value for the Total Controlled Slip Seconds parameter. The default value is 4 for an approximate BER level of(10** -5).
                     adDS1TotalThrsPCVsf 1.3.6.1.4.1.664.2.3.4.6 integer read-write
The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. The default value for an approximate BER level of (10**-5) is 691 framing errors.
                     adDS1TotalThrsPCVesf 1.3.6.1.4.1.664.2.3.4.7 integer read-write
The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. The default value for an approximate BER level of (10**-5) is 132,960 CRC errors.
                     adDS1TotalThrsLES 1.3.6.1.4.1.664.2.3.4.8 integer read-write
The DS1 performance monitor Threshold Value for the Total Line Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5).
                     adDS1TotalThrsLCV 1.3.6.1.4.1.664.2.3.4.9 integer read-write
The DS1 performance monitor Threshold Value for the Total Line Code Violations parameter. The default value is 133,400 for an approximate BER level of (10** -5).