ADSL-DMT-LINE-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: ADSL-DMT-LINE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, ADSL-LINE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 adslLineDmtMIB 1.3.6.1.2.1.10.94.1.1.16.2
Naming Conventions: Atuc -- (ATUC) modem at near (Central) end of line Atur -- (ATUR) modem at Remote end of line ES -- Errored Second. LCS -- Line Code Specific Lof -- Loss of Frame Lol -- Loss of Link Los -- Loss of Signal Lpr -- Loss of Power
     adslLineDmtMIBObjects 1.3.6.1.2.1.10.94.1.1.16.2.1
         adslLineDmtTable 1.3.6.1.2.1.10.94.1.1.16.2.1.1 no-access
This table extends the adslLineTable and contains common attributes describing both ends of ADSL lines supported by the system.
             adslLineDmtEntry 1.3.6.1.2.1.10.94.1.1.16.2.1.1.1 no-access
A set of common attributes describing both ends of an ADSL line supported by the system. There exist an entry for each ifEntry with an ifType of adsl(94).
                 adslLineDmtTrellis 1.3.6.1.2.1.10.94.1.1.16.2.1.1.1.1 integer read-only
Reports whether the Trellis coding is used on the DMT line. Use of trellis coding is determined at line initialization with C-MSGS1 and R-MSGS1 exchanges and will not change until the line is re-initialized. Enumeration: 'trellisOn': 1, 'trellisOff': 2.
                 adslLineDmtEOC 1.3.6.1.2.1.10.94.1.1.16.2.1.1.1.2 integer read-only
Reports whether the eoc can support autonomous data streaming mode or only transaction mode. After initialization, unknown is reported until sufficient autonomous eoc messages have been transmitted to determine the true capability of both ATUs. Enumeration: 'unknown': 1, 'transaction': 2, 'streaming': 3.
         adslAtucDmtPhysTable 1.3.6.1.2.1.10.94.1.1.16.2.1.2 no-access
This table extends the adslAtucPhysTable and contains specific physical layer parameters for the ATU-C class devices supported by the system.
             adslAtucDmtPhysEntry 1.3.6.1.2.1.10.94.1.1.16.2.1.2.1 no-access
A set of physical-layer parameters for an ATU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
                 adslAtucDmtIssue 1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.1 integer read-only
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-C in C-MSGS1 during initialization. Enumeration: 't1413Issue2': 3, 'gdmtIssue1': 5, 'etsiIssue1': 6, 't1413Issue3': 4, 'other': 1, 't1413Issue1': 2.
                 adslAtucDmtState 1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.2 integer read-only
Reports current state of the ATU-C DMT transceiver. The current state can change dynamically. The SNMP agent reports the state after querying the ATU-C state machine. Enumeration: 'training': 8, 'powerUp': 2, 'tone': 6, 'configure': 3, 'exchange': 10, 'quiet': 5, 'notResponding': 12, 'idle': 4, 'other': 1, 'analyzing': 9, 'steadyState': 11, 'activating': 7.
                 adslAtucDmtInterleavePath 1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.3 integer read-only
Reports bearer channel of downstream interleaved path. Enumeration: 'none': 1, 'as0': 2, 'as1': 3.
                 adslAtucDmtFastPath 1.3.6.1.2.1.10.94.1.1.16.2.1.2.1.4 integer read-only
Reports bearer channel of downstream fast path. Enumeration: 'none': 1, 'as0': 2, 'as1': 3.
         adslAturDmtPhysTable 1.3.6.1.2.1.10.94.1.1.16.2.1.3 no-access
This table extends the adslAturPhysTable and contains physical layer parameters for the ATU-R class devices supported by the system.
             adslAturDmtPhysEntry 1.3.6.1.2.1.10.94.1.1.16.2.1.3.1 no-access
A set of physical-layer parameters for an ATU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
                 adslAturDmtIssue 1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.1 integer read-only
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-R is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-R in R-MSGS1 during initialization. Enumeration: 't1413Issue2': 3, 'gdmtIssue1': 5, 'etsiIssue1': 6, 't1413Issue3': 4, 'other': 1, 't1413Issue1': 2.
                 adslAturDmtState 1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.2 integer read-only
Reports current state of the ATU-R DMT transceiver. The current state can change dynamically. ATU-R state is reported by the SNMP agent at the ATU-C which infers the state depending on the ATU-C state. When the inference cannot be made, unknown state is returned. Enumeration: 'training': 3, 'exchange': 5, 'other': 1, 'analyzing': 4, 'steadyState': 6, 'activating': 2.
                 adslAturDmtInterleavePath 1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.3 integer read-only
Reports bearer channel of upstream interleaved path. Enumeration: 'none': 1, 'ls0': 2, 'ls1': 3.
                 adslAturDmtFastPath 1.3.6.1.2.1.10.94.1.1.16.2.1.3.1.4 integer read-only
Reports bearer channel of upstream fast path. Enumeration: 'none': 1, 'ls0': 2, 'ls1': 3.
         adslAtucDmtChanTable 1.3.6.1.2.1.10.94.1.1.16.2.1.4
         adslAturDmtChanTable 1.3.6.1.2.1.10.94.1.1.16.2.1.5
         adslAtucDmtPerfDataTable 1.3.6.1.2.1.10.94.1.1.16.2.1.6
         adslAturDmtPerfDataTable 1.3.6.1.2.1.10.94.1.1.16.2.1.7
         adslAtucDmtIntervalTable 1.3.6.1.2.1.10.94.1.1.16.2.1.8
         adslAturDmtIntervalTable 1.3.6.1.2.1.10.94.1.1.16.2.1.9
         adslAtucDmtChanPerfDataTable 1.3.6.1.2.1.10.94.1.1.16.2.1.10
         adslAturDmtChanPerfDataTable 1.3.6.1.2.1.10.94.1.1.16.2.1.11
         adslAtucDmtChanIntervalTable 1.3.6.1.2.1.10.94.1.1.16.2.1.12
         adslAturDmtChanIntervalTable 1.3.6.1.2.1.10.94.1.1.16.2.1.13
         adslLineDmtConfProfileIndexNext 1.3.6.1.2.1.10.94.1.1.16.2.1.14
         adslLineDmtConfProfileTable 1.3.6.1.2.1.10.94.1.1.16.2.1.15 no-access
This table extends the adslLineConfProfileTable and contains ADSL DMT line configuration information.
               adslLineDmtConfProfileEntry 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1 no-access
A configuration profile containing ADSL DMT line configuration information.
                   adslAtucDmtConfFreqBins 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.1 octet string read-only
A string of 32 bits to enable/disable the incoming DMT frequency bins that the ATU-C receiver monitors. Each bit controls one bin with the first bit of the first octet controlling sub-carrier zero (lowest frequency bin). A bit set to 1 disables reception of the specified sub- carrier frequency bin end a 0 enables reception.
                   adslAturDmtConfFreqBins 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.2 octet string read-only
A string of 256 bits to enable/disable the incoming DMT frequency bins that the ATU-R receiver should monitor after the next activation. The mechanism to pass adslAturDMTConfFreqBins to the ATU-R is vendor specific. Each bit controls one bin with the first bit of the first octet controlling sub-carrier zero (lowest frequency bin). A bit set to 1 disables reception of the specified sub-carrier frequency bin end a 0 enables reception.
                   adslLineDmtConfMode 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.3 integer read-only
Defines the operational mode of the DMT ADSL transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges. Enumeration: 'freqDivMux': 2, 'echoCancel': 1.
                   adslLineDmtConfTrellis 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.4 integer read-only
Enables the Trellis coder of the DMT transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges. Enumeration: 'enable': 1, 'disable': 2.
                   adslLineDmtConfEOC 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.5 integer read-only
Defines the embedded operations channel mode for the DMT ADSL line. Enumeration: 'streaming': 2, 'byte': 1.
                   adslAtucDmtConfInterleavePath 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.6 integer read-only
Target channel for downstream interleave data path. Enumeration: 'none': 1, 'as0': 2, 'as1': 3.
                   adslAtucDmtConfFastPath 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.7 integer read-only
Target channel for downstream fast data path. Enumeration: 'none': 1, 'as0': 2, 'as1': 3.
                   adslAturDmtConfInterleavePath 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.8 integer read-only
Target channel for upstream interleave data path. Enumeration: 'none': 1, 'ls0': 2, 'ls1': 3.
                   adslAturDmtConfFastPath 1.3.6.1.2.1.10.94.1.1.16.2.1.15.1.9 integer read-only
Target channel for upstream fast data path. Enumeration: 'none': 1, 'ls0': 2, 'ls1': 3.
         adslLineDmtAlarmConfProfileIndexNext 1.3.6.1.2.1.10.94.1.1.16.2.1.16
         adslLineDmtAlarmConfProfileTable 1.3.6.1.2.1.10.94.1.1.16.2.1.17
     adslDmtLineMIBNotificationsPrefix 1.3.6.1.2.1.10.94.1.1.16.2.2
         adslDmtLineMIBNotifications 1.3.6.1.2.1.10.94.1.1.16.2.2.0
     adslLineDmtMIBConformance 1.3.6.1.2.1.10.94.1.1.16.2.3
         adslLineDmtMIBCompliances 1.3.6.1.2.1.10.94.1.1.16.2.3.1
             adslDMTLineMibCompliance 1.3.6.1.2.1.10.94.1.1.16.2.3.1.1
The compliance statement for SNMP entities which have ADSL DMT interfaces.
             adslLineDmtMIBAturCompliance 1.3.6.1.2.1.10.94.1.1.16.2.3.1.2
The compliance statement for SNMP entities which manage ADSL DMT ATU-R interfaces.
         adslLineDmtMIBGroups 1.3.6.1.2.1.10.94.1.1.16.2.3.2
             adslLineDmtGroup 1.3.6.1.2.1.10.94.1.1.16.2.3.2.1
A collection of managed objects defining the attributes of an ADSL line supportings modems using the DMT line code.
             adslAtucDmtPhysGroup 1.3.6.1.2.1.10.94.1.1.16.2.3.2.2
A collection of managed objects defining the physical-layer parameters of an ATU-C using the DMT line code.
             adslAturDmtPhysGroup 1.3.6.1.2.1.10.94.1.1.16.2.3.2.3
A collection of managed objects defining the physical-layer parameters of an ATU-R using the DMT line code.
             adslLineDmtConfProfileGroup 1.3.6.1.2.1.10.94.1.1.16.2.3.2.4
A collection of managed objects defining the line configuration information associated with one or more ADSL ATU class devices implementing the DMT line code.