ADH3-NETCOM-MIB: View SNMP OID List / Download MIB

VENDOR: ENVIRONMENTAL TECHNOLOGY


 Home MIB: ADH3-NETCOM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 environmentalTechnology 1.3.6.1.4.1.32185
The Structure of Management Information for Environmental Technology Inc. SNMP devices
             netcom 1.3.6.1.4.1.32185.2
ADH-3 NETCOM
                 statusInfo 1.3.6.1.4.1.32185.2.1
                     allStatuses 1.3.6.1.4.1.32185.2.1.1 displaystring read-only
Summary: same as objects 2-7, separated by semicolons
                     pressurePSI 1.3.6.1.4.1.32185.2.1.2 displaystring read-only
Pressure, in PSI
                     dutycycle 1.3.6.1.4.1.32185.2.1.3 displaystring read-only
Current duty cycle, in percent; --- if none available
                     statusVars 1.3.6.1.4.1.32185.2.1.4 displaystring read-only
Summary of the status of the unit. Is always 6 characters Character 1 is major state: N=normal, S=standby, L=leaky Character 2 is environment: N=normal, C=cold, H=hot Character 3 is canister 1 condition: O=OK (ie dry), F=full (wet), U=unknown, D=dead Character 4 is canister 1 usage: I=idle, U=in use, R=regenerating Character 5 is canister 2 condition, as in character 3 Character 5 is canister 2 usage, as in character 4
                     temperature 1.3.6.1.4.1.32185.2.1.5 displaystring read-only
Current temperature, in degrees F
                     alarms 1.3.6.1.4.1.32185.2.1.6 displaystring read-only
Current alarm conditions: is a list of them Each character has a - for no alarm, or an A or W if there is an alarm. A means alarm (serious), W means a warning (not so serious).
                     compressorHours 1.3.6.1.4.1.32185.2.1.7 displaystring read-only
Number of hours that the compressor has been running; resolution is tenths of an hour.
                     majorState 1.3.6.1.4.1.32185.2.1.8 integer read-write
Major state of the dehydrator. Online: currently pressurizing. Standby: not pressurizing. Leaky: shut down because of inability to pressurize. Enumeration: 'standby': 2, 'leaky': 3, 'online': 1.
                 paramsInfo 1.3.6.1.4.1.32185.2.2
                     lowerLimit 1.3.6.1.4.1.32185.2.2.1 displaystring read-only
The pressure, in PSI, at which the unit starts to pump
                     upperLimit 1.3.6.1.4.1.32185.2.2.2 displaystring read-only
The pressure, in PSI, which the unit pressurizes to
                     lowerAlarmLimit 1.3.6.1.4.1.32185.2.2.3 displaystring read-only
The pressure, in PSI, below which the unit declares a low pressure alarm
                     upperAlarmLimit 1.3.6.1.4.1.32185.2.2.4 displaystring read-only
The pressure, in PSI, above which the unit declares a high pressure alarm