AC-GATEWAY-MIB: View SNMP OID List / Download MIB
VENDOR: AUDIOCODES LTD
| Home | MIB: AC-GATEWAY-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| acGateway | 1.3.6.1.4.1.5003.9.10.3 | |||
| gwConfiguration | 1.3.6.1.4.1.5003.9.10.3.1 | |||
| common | 1.3.6.1.4.1.5003.9.10.3.1.1 | |||
| channelsSetting | 1.3.6.1.4.1.5003.9.10.3.1.1.1 | |||
| channelsSettingSelectMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.1 | integer | read-write |
Default method to use for trunk B-channel allocation (IP to Tel calls). Access: Instant. AC INI-Param: CHANNELSELECTMODE Enumeration: 'ascendingAlways': 2, 'bySourcePhoneNumber': 6, 'descendingAlways': 4, 'cyclicDescending': 3, 'cyclicAscending': 1, 'byDestPhoneNumber': 0, 'trunkCyclicAscending': 7, 'byDestinationPhoneNumberCyclicAscending': 5. |
| channelsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21 | no-access |
The table defines trunk/hunt groups and phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1 | no-access | |||
| channelsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.1 | unsigned32 | no-access |
Channel numbers, starting at 0. AC INI-Param: TrunkGroup_Index |
| channelsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| channelsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| channelsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| channelsTrunkID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.5 | unsigned32 | read-only |
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_FirstTrunkId |
| channelsStartingCh | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.6 | unsigned32 | read-only |
Starting Channel for this trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_FirstBChannel |
| channelsLastCh | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.7 | unsigned32 | read-only |
Last Channel for the trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_LastBChannel |
| channelsStartingPhoneNum | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.8 | snmpadminstring | read-only |
Starting Phone Number. Access: Instant. AC INI-Param: TrunkGroup_FirstPhoneNumber |
| channelsTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.9 | unsigned32 | read-only |
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_TrunkGroupNum |
| channelsProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.10 | unsigned32 | read-only |
Profile ID. Access: Instant. AC INI-Param: TrunkGroup_ProfileId |
| channelsLastTrunkID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.11 | unsigned32 | read-only |
Last Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_LastTrunkId |
| channelsModule | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.12 | unsigned32 | read-only |
Channels Module. Access: Instant. AC INI-Param: TrunkGroup_Module |
| trunkGroupSettingsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22 | no-access |
The table defines trunk/hunt groups configuration |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1 | no-access | |||
| trunkGroupSettingsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.1 | unsigned32 | no-access |
Trunk numbers, starting at 0. AC INI-Param: TrunkGroupSettings_Index |
| trunkGroupSettingsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| trunkGroupSettingsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| trunkGroupSettingsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| trunkGroupSettingsTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.5 | unsigned32 | read-only |
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroupSettings_TrunkGroupId |
| trunkGroupSettingsChannelSelectMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.6 | integer | read-only |
Selects the next available (free) Gateway port, FXO/PSTN: affects outgoing calls chanel selection FXS:affects incoming call channel selection. Access: Instant. AC INI-Param: TrunkGroupSettings_ChannelSelectMode Enumeration: 'valueNotSet': 255, 'ascendingAlways': 2, 'bySourcePhoneNumber': 6, 'descendingAlways': 4, 'byPhoneNumber': 0, 'byPhoneNumberCyclicAscending': 5, 'cyclicAscending': 1, 'trunkAndChannelCyclicAscending': 8, 'trunkCyclicAscending': 7, 'cyclicDescending': 3. |
| trunkGroupSettingsRegistrationMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.7 | integer | read-only |
Access: Instant. AC INI-Param: TrunkGroupSettings_RegistrationMode Enumeration: 'doNotRegister': 4, 'valueNotSet': 255, 'notApplicable': 2, 'perEndpoint': 0, 'perAccount': 5, 'perGateway': 1. |
| trunkGroupSettingsGatewayName | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.8 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: TrunkGroupSettings_GatewayName |
| trunkGroupSettingsContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.9 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: TrunkGroupSettings_ContactUser |
| trunkGroupSettingsServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.10 | integer32 | read-only |
Access: Instant. AC INI-Param: TrunkGroupSettings_ServingIPGroup |
| trunkGroupSettingsMwiInterrogationType | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.11 | integer | read-only |
Access: Instant. AC INI-Param: TrunkGroupSettings_MWIInterrogationType Enumeration: 'resultNotUsed': 2, 'none': 0, 'useResult': 3, 'notConfigured': 255, 'useActivateOnly': 1. |
| manipulationAndRouting | 1.3.6.1.4.1.5003.9.10.3.1.1.2 | |||
| manipulationAndRoutingModeTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.2.1 | integer | read-write |
Defines order between routing incoming calls from Tel side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODETEL2IP Enumeration: 'routeAfterMap': 1, 'routeBeforeMap': 0. |
| manipulationAndRoutingModeIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.2.2 | integer | read-write |
Defines order between routing incoming calls from IP side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODEIP2TEL Enumeration: 'routeAfterMap': 1, 'routeBeforeMap': 0. |
| manipulationAndRoutingFilterCalls2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.2.3 | integer | read-write |
When Gatekeeper/Proxy is enabled, do not start session if called number is not listed or restricted in Tel to IP routing table. Access: Instant. AC INI-Param: FILTERCALLS2IP Enumeration: 'yes': 1, 'no': 0. |
| manipulationAndRoutingAltRoutingTel2IpEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.4 | integer | read-write |
Enable Tel to IP Alternative Routing. Can be enabled for status only without affecting routing. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPENABLE Enumeration: 'enable': 1, 'disable': 0, 'statusOnly': 2. |
| manipulationAndRoutingAltRoutingTel2IpMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.5 | integer | read-write |
Methods used for Alternative Routing operation. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPMODE Enumeration: 'both': 3, 'none': 0, 'qos': 2, 'conn': 1. |
| manipulationAndRoutingAltRoutingTel2IpQosAllowTheNCall | 1.3.6.1.4.1.5003.9.10.3.1.1.2.6 | unsigned32 | read-write |
in case of QOS problem, a call has this probability (in percents) to continue, in order to reevaluate the QOS. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPQOSALLOWPROB |
| manipulationAndRoutingPreferRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.7 | integer | read-write |
Prefer Routing Table. Access: Instant. AC INI-Param: PREFERROUTETABLE Enumeration: 'enable': 1, 'disable': 0. |
| manipulationAndRoutingRedundantRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.8 | integer | read-write |
Mode of redundant routing. 0 - Disabled, 1 - Use routing table, 2 - Use proxies list. Access: Instant. AC INI-Param: REDUNDANTROUTINGMODE Enumeration: 'routingTable': 1, 'disable': 0, 'proxy': 2. |
| manipulationAndRoutingAltRoutingTel2IpConnMethod | 1.3.6.1.4.1.5003.9.10.3.1.1.2.9 | integer | read-write |
Tel to IP Alternative Routing Connectivity Method. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPCONNMETHOD Enumeration: 'ping': 0, 'options': 1. |
| manipulationAndRoutingSIPReRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.10 | integer | read-write |
Defines the routing mode after receiving 3xx response or transfer 0 - standard mode 1 - send invite to proxy 2 - use routing table. Access: Instant. AC INI-Param: SIPREROUTINGMODE Enumeration: 'useRoutingTable': 2, 'standardMode': 0, 'sendInviteToProxy': 1. |
| manipulationAndRoutingAltRoutingToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.2.11 | unsigned32 | read-write |
Alternative Routing Tone Duration. 0 - disabled (milliseconds). Access: Instant. AC INI-Param: ALTROUTINGTONEDURATION |
| manipulationAndRoutingAltRoutingTel2IpKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.1.2.12 | unsigned32 | read-write |
Time interval between OPTIONS Keep-Alive messages for IP connectivity (seconds). Access: Instant. AC INI-Param: ALTROUTINGTEL2IPKEEPALIVETIME |
| routing | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20 | |||
| tel2IPRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1 | no-access |
Phone prefix to IP address routing table. The table is used for routing incoming PSTN to IP calls, if Gatekeeper is not used. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1 | no-access | |||
| tel2IPRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: PREFIX_Index |
| tel2IPRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| tel2IPRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| tel2IPRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| tel2IPRoutingPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.5 | snmpadminstring | read-only |
Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_DestinationPrefix |
| tel2IPRoutingAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.6 | snmpadminstring | read-only |
Address (IP or DNS name). Access: Instant. AC INI-Param: PREFIX_DestAddress |
| tel2IPRoutingSrcPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.7 | snmpadminstring | read-only |
Calling Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_SourcePrefix |
| tel2IPRoutingProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.8 | integer32 | read-only |
Profile ID. Access: Instant. AC INI-Param: PREFIX_ProfileId |
| tel2IPRoutingChargeCode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.9 | unsigned32 | read-only |
Charge code to use for generating metering tones. Access: Instant. AC INI-Param: PREFIX_MeteringCode |
| tel2IPRoutingDestPort | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.10 | unsigned32 | read-only |
Destination port. Access: Instant. AC INI-Param: PREFIX_DestPort |
| tel2IPRoutingSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.11 | integer32 | read-only |
Access: Instant. AC INI-Param: PREFIX_SrcIPGroupID |
| tel2IPRoutingDestHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.12 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: PREFIX_DestHostPrefix |
| tel2IPRoutingDestIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.13 | integer32 | read-only |
Access: Instant. AC INI-Param: PREFIX_DestIPGroupID |
| tel2IPRoutingSourceHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.14 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: PREFIX_SrcHostPrefix |
| tel2IPRoutingTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.15 | integer | read-only |
Access: Instant. AC INI-Param: PREFIX_TransportType Enumeration: 'tls': 2, 'udp': 0, 'tcp': 1, 'notConfigured': -1. |
| tel2IPRoutingSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.16 | integer32 | read-only |
Access: Instant. AC INI-Param: PREFIX_SrcTrunkGroupID |
| iP2TelRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2 | no-access |
Phone prefix to Trunk group (or Hunt Group for MP-1xx)routing table. The table is used for routing outgoing IP Telco calls, according to received from IP destination phone number. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1 | no-access | |||
| iP2TelRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: PstnPrefix_Index |
| iP2TelRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| iP2TelRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| iP2TelRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| iP2TelRoutingPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.5 | snmpadminstring | read-only |
Phone number prefix. up to 80 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_DestPrefix |
| iP2TelRoutingTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.6 | unsigned32 | read-only |
Trunk/Hunt group ID. Access: Instant. AC INI-Param: PstnPrefix_TrunkGroupId |
| iP2TelRoutingSrcPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.7 | snmpadminstring | read-only |
Calling Phone number prefix. up to 49 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_SourcePrefix |
| iP2TelRoutingAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.8 | snmpadminstring | read-only |
Address (IP or DNS name). Access: Instant. AC INI-Param: PstnPrefix_SourceAddress |
| iP2TelRoutingProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.9 | unsigned32 | read-only |
Profile ID. Access: Instant. AC INI-Param: PstnPrefix_ProfileId |
| iP2TelRoutingSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.10 | integer32 | read-only |
Access: Instant. AC INI-Param: PstnPrefix_SrcIPGroupID |
| iP2TelRoutingDestHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: PstnPrefix_DestHostPrefix |
| iP2TelRoutingSourceHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.12 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: PstnPrefix_SrcHostPrefix |
| dnsInfoTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1 | no-access | |||
| dnsInfoIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: Dns2Ip_Index |
| dnsInfoRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| dnsInfoAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dnsInfoActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dnsInfoDomainName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.5 | snmpadminstring | read-only |
Domain Name. Access: Instant. AC INI-Param: Dns2Ip_DomainName |
| dnsInfoFirstIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.6 | snmpadminstring | read-only |
IP Address. Access: Instant. AC INI-Param: Dns2Ip_FirstIpAddress |
| dnsInfoSecondIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.7 | snmpadminstring | read-only |
IP Address. Access: Instant. AC INI-Param: Dns2Ip_SecondIpAddress |
| dnsInfoThirdIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.8 | snmpadminstring | read-only |
IP Address. Access: Instant. AC INI-Param: Dns2Ip_ThirdIpAddress |
| dnsInfoFourthIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.9 | snmpadminstring | read-only |
IP Address. Access: Instant. AC INI-Param: Dns2Ip_FourthIpAddress |
| srvInfoTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1 | no-access | |||
| srvInfoIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: Srv2Ip_Index |
| srvInfoRecordNum | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.2 | unsigned32 | no-access |
Equals to the entry number. AC INI-Param: Srv2Ip_Index |
| srvInfoRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.3 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| srvInfoAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srvInfoActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.5 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srvInfoInternalDomainName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.6 | snmpadminstring | read-only |
the Domain name for the SRV query. Access: Instant. AC INI-Param: Srv2Ip_InternalDomain |
| srvInfoTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.7 | integer | read-only |
the transport type. Access: Instant. AC INI-Param: Srv2Ip_TransportType Enumeration: 'tLS': 2, 'uDP': 0, 'tCP': 1. |
| srvInfoDNSName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.8 | snmpadminstring | read-only |
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns1 |
| srvInfoPriority | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.9 | unsigned32 | read-only |
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority1 |
| srvInfoWeight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.10 | unsigned32 | read-only |
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight1 |
| srvInfoPort | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.11 | unsigned32 | read-only |
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port1 |
| srvInfoDNSName2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.12 | snmpadminstring | read-only |
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns2 |
| srvInfoPriority2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.13 | unsigned32 | read-only |
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority2 |
| srvInfoWeight2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.14 | unsigned32 | read-only |
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight2 |
| srvInfoPort2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.15 | unsigned32 | read-only |
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port2 |
| srvInfoDNSName3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.16 | snmpadminstring | read-only |
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns3 |
| srvInfoPriority3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.17 | unsigned32 | read-only |
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority3 |
| srvInfoWeight3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.18 | unsigned32 | read-only |
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight3 |
| srvInfoPort3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.19 | unsigned32 | read-only |
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port3 |
| forwardOnBusyTrunkDestTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5 | no-access |
GwApp Forward On Busy Trunk Destination Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1 | no-access | |||
| forwardOnBusyTrunkDestIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: ForwardOnBusyTrunkDest_Index |
| forwardOnBusyTrunkDestRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| forwardOnBusyTrunkDestAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| forwardOnBusyTrunkDestActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| forwardOnBusyTrunkDestTrunkGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.5 | unsigned32 | read-only |
GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_TrunkGroupId |
| forwardOnBusyTrunkDestForwardDestination | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.6 | snmpadminstring | read-only |
GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_ForwardDestination |
| altRouteCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10 | |||
| altRouteCauseIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1 | no-access | |||
| altRouteCauseIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: AltRouteCauseIp2Tel_Index |
| altRouteCauseIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| altRouteCauseIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| altRouteCauseIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| altRouteCauseIP2TELReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.5 | unsigned32 | read-only |
Release Cause. Access: Instant. AC INI-Param: AltRouteCauseIp2Tel_ReleaseCause |
| altRouteCauseTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1 | no-access | |||
| altRouteCauseTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: AltRouteCauseTel2Ip_Index |
| altRouteCauseTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| altRouteCauseTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| altRouteCauseTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| altRouteCauseTEL2IPReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.5 | unsigned32 | read-only |
Release Cause. Access: Instant. AC INI-Param: AltRouteCauseTel2Ip_ReleaseCause |
| routingEnableDigitDelivery2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.21 | integer | read-write |
Enable automatic digit delivery to IP side after call is connected. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY2IP Enumeration: 'enable': 1, 'disable': 0. |
| routingSourceIPAddressInput | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.22 | integer | read-write |
Decides the origin of the source ip address looked at when routing using the IP --> Tel table. 0 - Contact 1 - Recieved packet source IP address. Access: Instant. AC INI-Param: SOURCEIPADDRESSINPUT Enumeration: 'sIPContactHeader': 0, 'layer3SourceIP': 1, 'notConfigured': -1. |
| manipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21 | |||
| manipulationRemovePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.1 | integer | read-write |
Remove prefix defined in IP to Trunk Group table (IP to Tel calls). Access: Instant. AC INI-Param: REMOVEPREFIX Enumeration: 'yes': 1, 'no': 0. |
| manipulationAddTrunkGroupAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.2 | integer | read-write |
Add Trunk Group ID on which the call was received as the called number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIX Enumeration: 'yes': 1, 'no': 0. |
| manipulationAddPortAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.3 | integer | read-write |
Add port number (Analog gateway) / Trunk ID (Digital gateway) as called number prefix. Access: Instant. AC INI-Param: ADDPORTASPREFIX Enumeration: 'yes': 1, 'no': 0. |
| manipulationReplaceEmptyDstWithPortNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.4 | integer | read-write |
Replace empty destination number (received from Tel side) with port number. Access: Instant. AC INI-Param: REPLACEEMPTYDSTWITHPORTNUMBER Enumeration: 'enable': 1, 'disable': 0. |
| manipulationCIDNotification | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.5 | integer | read-write |
If NO PRESENTATION arrived from PSTN and this parameter enabled,than the presentation will be allowed. If this parameter disabled, the, presentation will be restricted. Access: Instant. AC INI-Param: CIDNOTIFICATION Enumeration: 'enable': 1, 'disable': 0. |
| manipulationUseSourceNumberAsDisplayName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.6 | integer | read-write |
if set to 1 Use source number as display name if empty. if set to 2 always use source number as display name . Access: Instant. AC INI-Param: USESOURCENUMBERASDISPLAYNAME Enumeration: 'enable': 1, 'disable': 0, 'overwrite': 2. |
| manipulationAddNPIandTON2CalledNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.7 | integer | read-write |
Add NPI and TON as prefix to called number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLEDNUMBER Enumeration: 'enable': 1, 'disable': 0. |
| manipulationAddNPIandTON2CallingNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.8 | integer | read-write |
Add NPI and TON as prefix to calling number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLINGNUMBER Enumeration: 'enable': 1, 'disable': 0. |
| manipulationUseDisplayNameAsSourceNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.9 | integer | read-write |
when set to 1 then If display name exists, use it as source number. If not, set presentation as restricted. Access: Instant. AC INI-Param: USEDISPLAYNAMEASSOURCENUMBER Enumeration: 'enable': 1, 'disable': 0. |
| manipulationAddPrefixToRedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.10 | snmpadminstring | read-write |
Prefix which added to redirect phone number. Access: Instant. AC INI-Param: PREFIX2REDIRECTNUMBER |
| manipulationAddPhoneContextAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.11 | integer | read-write |
add the phone context to src/dest phone number as prefix. Access: Instant. AC INI-Param: ADDPHONECONTEXTASPREFIX Enumeration: 'yes': 1, 'no': 0. |
| manipulationBlindTransferAddPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.12 | integer | read-write |
Add keying sequence for performing blind transfer as transfer number prefix. Access: Instant. AC INI-Param: KEYBLINDTRANSFERADDPREFIX Enumeration: 'enable': 1, 'disable': 0. |
| manipulationSourceMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.13 | integer | read-write |
Describes the headers containing source number after manipulation: (0) both FROM and P-Asserted contain src number after manipulations (1) only FROM contains src number after manipulation. Access: Instant. AC INI-Param: SOURCEMANIPULATIONMODE Enumeration: 'fromAndPai': 0, 'fromOnly': 1. |
| manipulationAddTrunkGroupAsPrefixToSource | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.14 | integer | read-write |
Add Trunk Group ID on which the call was received as the calling number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIXTOSOURCE Enumeration: 'yes': 1, 'no': 0. |
| manipulationSetTel2IpRedirectReason | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.15 | integer | read-write |
If redirect (diversion) data is received from the PSTN interface, the redirect reason is set to the value of this parameter, before transferring it to the IP. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetTel2IpRedirectReason Enumeration: 'noReply': 2, 'notConfigured': -1, 'unknown': 0, 'systematicOrUnconditional': 15, 'bust': 1, 'deflection': 4, 'dTEOutOfOrder': 9, 'pickUp': 14, 'transfer': 13, 'networkBusy': 3, 'forwardingDTE': 10. |
| manipulationSetIp2TelRedirectReason | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.16 | integer | read-write |
If redirect (diversion) data is received from the IP side, the redirect reason is set to the value of this parameter, before transferring it to the PSTN interface. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetIp2TelRedirectReason Enumeration: 'noReply': 2, 'notConfigured': -1, 'unknown': 0, 'systematicOrUnconditional': 15, 'bust': 1, 'deflection': 4, 'dTEOutOfOrder': 9, 'pickUp': 14, 'transfer': 13, 'networkBusy': 3, 'forwardingDTE': 10. |
| manipulationSetIp2TelRedirectScreeningIndicator | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.17 | integer | read-write |
Override screening indicator value of the redirect number in Setup messages to PSTN interface. Access: Instant. AC INI-Param: SetIp2TelRedirectScreeningInd Enumeration: 'userFailed': 2, 'networkProvided': 3, 'userProvided': 0, 'notConfigured': -1, 'userPassed': 1. |
| dstIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1 | no-access | |||
| dstIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.1 | unsigned32 | no-access |
Destination number, starting at 0. AC INI-Param: NumberMapIp2Tel_Index |
| dstIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| dstIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dstIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dstIP2TELPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: NumberMapIp2Tel_DestinationPrefix |
| dstIP2TELNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.6 | unsigned32 | read-only |
Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromLeft |
| dstIP2TELPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.7 | snmpadminstring | read-only |
Prefix to Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Prefix2Add |
| dstIP2TELNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.8 | unsigned32 | read-only |
Number of digits to leave. Access: Instant. AC INI-Param: NumberMapIp2Tel_LeaveFromRight |
| dstIP2TELNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.9 | integer | read-only |
Number Plan. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberPlan Enumeration: 'unknown': 0, 'notConfigured': 255, 'private': 9, 'e164Public': 1. |
| dstIP2TELNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.10 | integer | read-only |
Number Type. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberType Enumeration: 'abbreviated': 6, 'notConfigured': 255, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| dstIP2TELSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.11 | snmpadminstring | read-only |
Source Prefix. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourcePrefix |
| dstIP2TELSourceIP | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.12 | snmpadminstring | read-only |
Source IP. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourceAddress |
| dstIP2TELNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.13 | unsigned32 | read-only |
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromRight |
| dstIP2TELSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.14 | snmpadminstring | read-only |
Suffix To Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Suffix2Add |
| dstIP2TELIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.15 | unsigned32 | read-only |
Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapIp2Tel_IsPresentationRestricted |
| dstTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1 | no-access | |||
| dstTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.1 | unsigned32 | no-access |
Destination number, starting at 0. AC INI-Param: NumberMapTel2Ip_Index |
| dstTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| dstTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dstTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dstTEL2IPPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: NumberMapTel2Ip_DestinationPrefix |
| dstTEL2IPNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.6 | unsigned32 | read-only |
Num of stripped digits. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromLeft |
| dstTEL2IPPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.7 | snmpadminstring | read-only |
Prefix to Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Prefix2Add |
| dstTEL2IPNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.8 | unsigned32 | read-only |
Number of digits to leave. Access: Instant. AC INI-Param: NumberMapTel2Ip_LeaveFromRight |
| dstTEL2IPNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.9 | integer | read-only |
Number Plan. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberPlan Enumeration: 'unknown': 0, 'notConfigured': 255, 'private': 9, 'e164Public': 1. |
| dstTEL2IPNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.10 | integer | read-only |
Number Type. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberType Enumeration: 'abbreviated': 6, 'notConfigured': 255, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| dstTEL2IPSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: NumberMapTel2Ip_SourcePrefix |
| dstTEL2IPNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.12 | unsigned32 | read-only |
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromRight |
| dstTEL2IPSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.13 | snmpadminstring | read-only |
Suffix To Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Suffix2Add |
| dstTEL2IPIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.14 | unsigned32 | read-only |
Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapTel2Ip_IsPresentationRestricted |
| dstTEL2IPSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.15 | snmpadminstring | read-only |
Source Address. Access: Instant. AC INI-Param: NumberMapTel2Ip_SourceAddress |
| dstTEL2IPSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.16 | integer32 | read-only |
GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcTrunkGroupID |
| dstTEL2IPSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.17 | integer32 | read-only |
GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcIPGroupID |
| srcIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1 | no-access | |||
| srcIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.1 | unsigned32 | no-access |
Source number, starting at 0. AC INI-Param: SourceNumberMapIp2Tel_Index |
| srcIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| srcIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srcIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srcIP2TELPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourcePrefix |
| srcIP2TELNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.6 | unsigned32 | read-only |
Num of stripped digits. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromLeft |
| srcIP2TELPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.7 | snmpadminstring | read-only |
Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Prefix2Add |
| srcIP2TELNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.8 | unsigned32 | read-only |
Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_LeaveFromRight |
| srcIP2TELNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.9 | integer | read-only |
Number Plan. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberPlan Enumeration: 'unknown': 0, 'notConfigured': 255, 'private': 9, 'e164Public': 1. |
| srcIP2TELNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.10 | integer | read-only |
Number Type. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberType Enumeration: 'abbreviated': 6, 'notConfigured': 255, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| srcIP2TELDestPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_DestinationPrefix |
| srcIP2TELPresentation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.12 | integer | read-only |
Presentation. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_IsPresentationRestricted Enumeration: 'blocked': 1, 'notConfigured': 255, 'notBlocked': 0. |
| srcIP2TELNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.13 | unsigned32 | read-only |
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromRight |
| srcIP2TELSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.14 | snmpadminstring | read-only |
Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Suffix2Add |
| srcIP2TELSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.15 | snmpadminstring | read-only |
Source Address. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourceAddress |
| srcTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1 | no-access | |||
| srcTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.1 | unsigned32 | no-access |
Source number, starting at 0. AC INI-Param: SourceNumberMapTel2Ip_Index |
| srcTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| srcTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srcTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srcTEL2IPPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourcePrefix |
| srcTEL2IPNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.6 | unsigned32 | read-only |
Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromLeft |
| srcTEL2IPPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.7 | snmpadminstring | read-only |
Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Prefix2Add |
| srcTEL2IPNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.8 | unsigned32 | read-only |
Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_LeaveFromRight |
| srcTEL2IPNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.9 | integer | read-only |
Number Plan. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberPlan Enumeration: 'unknown': 0, 'notConfigured': 255, 'private': 9, 'e164Public': 1. |
| srcTEL2IPNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.10 | integer | read-only |
Number Type. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberType Enumeration: 'abbreviated': 6, 'notConfigured': 255, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| srcTEL2IPDestPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_DestinationPrefix |
| srcTEL2IPPresentation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.12 | integer | read-only |
Presentation. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_IsPresentationRestricted Enumeration: 'blocked': 1, 'notConfigured': 255, 'notBlocked': 0. |
| srcTEL2IPNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.13 | unsigned32 | read-only |
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromRight |
| srcTEL2IPSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.14 | snmpadminstring | read-only |
Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Suffix2Add |
| srcTEL2IPSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.15 | snmpadminstring | read-only |
Source Address. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourceAddress |
| srcTEL2IPSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.16 | integer32 | read-only |
GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcTrunkGroupID |
| srcTEL2IPSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.17 | integer32 | read-only |
GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcIPGroupID |
| phoneContextTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1 | no-access | |||
| phoneContextIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: PhoneContext_Index |
| phoneContextRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| phoneContextAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| phoneContextActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| phoneContextNPI | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.5 | integer | read-only |
Number Plan. Access: Instant. AC INI-Param: PhoneContext_Npi Enumeration: 'unknown': 0, 'private': 9, 'notConfigured': -1, 'e164Public': 1. |
| phoneContextTON | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.6 | integer | read-only |
Number Type. Access: Instant. AC INI-Param: PhoneContext_Ton Enumeration: 'abbreviated': 6, 'notConfigured': -1, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| phoneContextPhoneContext | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.7 | snmpadminstring | read-only |
Phone-Context. Access: Instant. AC INI-Param: PhoneContext_Context |
| redirectNumberMapIp2TelTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26 | no-access |
GwApp IP-to-Tel Redirect Phone Number Manipulation Rules Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1 | no-access | |||
| redirectNumberMapIp2TelIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: RedirectNumberMapIp2Tel_Index |
| redirectNumberMapIp2TelRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| redirectNumberMapIp2TelAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| redirectNumberMapIp2TelActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| redirectNumberMapIp2TelDestinationPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_DestinationPrefix |
| redirectNumberMapIp2TelRedirectPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.6 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RedirectPrefix |
| redirectNumberMapIp2TelSourceAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.7 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SourceAddress |
| redirectNumberMapIp2TelNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.8 | integer | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberType Enumeration: 'abbreviated': 6, 'networkSpecific': 3, 'notConfigured': 255, 'unknown': 0, 'national': 2, 'subscriber': 4, 'international': 1. |
| redirectNumberMapIp2TelNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.9 | integer | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberPlan Enumeration: 'unknown': 0, 'private': 9, 'notConfigured': 255, 'e164Public': 1. |
| redirectNumberMapIp2TelRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.10 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromLeft |
| redirectNumberMapIp2TelRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.11 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromRight |
| redirectNumberMapIp2TelLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.12 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_LeaveFromRight |
| redirectNumberMapIp2TelPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.13 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Prefix2Add |
| redirectNumberMapIp2TelSuffixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.14 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Suffix2Add |
| redirectNumberMapIp2TelIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.15 | integer | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_IsPresentationRestricted Enumeration: 'restricted': 1, 'notConfigured': 255, 'allowed': 0. |
| redirectNumberMapIp2TelSrcTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.16 | integer32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcTrunkGroupID |
| redirectNumberMapIp2TelSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.17 | integer32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcIPGroupID |
| redirectNumberMapTel2IpTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27 | no-access |
GwApp Tel-to-IP Redirect Phone Number Manipulation Rules Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1 | no-access | |||
| redirectNumberMapTel2IpIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: RedirectNumberMapTel2Ip_Index |
| redirectNumberMapTel2IpRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| redirectNumberMapTel2IpAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| redirectNumberMapTel2IpActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| redirectNumberMapTel2IpDestinationPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_DestinationPrefix |
| redirectNumberMapTel2IpRedirectPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.6 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RedirectPrefix |
| redirectNumberMapTel2IpSourceAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.7 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SourceAddress |
| redirectNumberMapTel2IpNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.8 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberType |
| redirectNumberMapTel2IpNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.9 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberPlan |
| redirectNumberMapTel2IpRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.10 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromLeft |
| redirectNumberMapTel2IpRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.11 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromRight |
| redirectNumberMapTel2IpLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.12 | unsigned32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_LeaveFromRight |
| redirectNumberMapTel2IpPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.13 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Prefix2Add |
| redirectNumberMapTel2IpSuffixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.14 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Suffix2Add |
| redirectNumberMapTel2IpIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.15 | integer | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_IsPresentationRestricted Enumeration: 'restricted': 1, 'notConfigured': 255, 'allowed': 0. |
| redirectNumberMapTel2IpSrcTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.16 | integer32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcTrunkGroupID |
| redirectNumberMapTel2IpSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.17 | integer32 | read-only |
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcIPGroupID |
| connectivityQos | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22 | |||
| connectivityQosMaxAllowedPL | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.1 | unsigned32 | read-write |
The maximum percentage of packet loss that will not prevent normal routing. Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDPL |
| connectivityQosMaxAllowedDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.2 | unsigned32 | read-write |
The maximum delay that will not prevent normal routing (msec). Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDDELAY |
| connectivityQosEffectivePeriod | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.3 | unsigned32 | read-write |
if during this period [in seconds], no updated qos info received, theold qos info is discarded. if qos poor, and no calls alowed, after this period, calls will be allowed again. Access: Instant. AC INI-Param: IPCONNQOSEFFECTIVEPERIOD |
| connectivityQosSamplesToAvarage | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.4 | unsigned32 | read-write |
number of samples to avarage. in other words define the weiught of the new sample. Access: Instant. AC INI-Param: IPCONNQOSSAMPLESTOAVARAGE |
| digitalGW | 1.3.6.1.4.1.5003.9.10.3.1.1.3 | |||
| digitalGWBChannelNegotiation | 1.3.6.1.4.1.5003.9.10.3.1.1.3.1 | integer | read-write |
ISDN B-Channel negotiation mode. Access: Instant. AC INI-Param: BCHANNELNEGOTIATION Enumeration: 'yes': 1, 'any': 2, 'no': 0. |
| digitalGWSwapRedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.3.2 | integer | read-write |
Swap Redirect and Called numbers. Access: Instant. AC INI-Param: SWAPREDIRECTNUMBER Enumeration: 'yes': 1, 'no': 0. |
| digitalGWEnableTransferCap | 1.3.6.1.4.1.5003.9.10.3.1.1.3.3 | integer | read-write |
Select Transfer Capabilities method between H.323/Q.931 and ISDN/Q.931. Access: Instant. AC INI-Param: ENABLETRANSFERCAP Enumeration: 'yes': 1, 'no': 0. |
| digitalGWR2Category | 1.3.6.1.4.1.5003.9.10.3.1.1.3.4 | unsigned32 | read-write |
MFC\R2 Calling Party's category. Access: Instant. AC INI-Param: R2CATEGORY |
| digitalGWISDNRxOverlap | 1.3.6.1.4.1.5003.9.10.3.1.1.3.5 | integer | read-write |
Enable reception of overlap dialing from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP Enumeration: 'yes': 1, 'no': 0. |
| digitalGWCASSendHookFlash | 1.3.6.1.4.1.5003.9.10.3.1.1.3.6 | integer | read-write |
0 (default): Hookflash not forwarded 1:HookFlash forwarded - Testing. Access: Instant. AC INI-Param: CASSENDHOOKFLASH Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWISDNTransferCapability | 1.3.6.1.4.1.5003.9.10.3.1.1.3.7 | integer | read-write |
Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY Enumeration: 'audio': 3, 'voice': 1, 'modem': 0, 'data': 2, 'doNotOverwrite': -1. |
| digitalGWEnableTDMOverIp | 1.3.6.1.4.1.5003.9.10.3.1.1.3.8 | integer | read-write |
Enable gateway to maintain a permanent RTP connection. Access: Offline. AC INI-Param: ENABLETDMOVERIP Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWTransparentCoderOnDataCall | 1.3.6.1.4.1.5003.9.10.3.1.1.3.9 | integer | read-write |
In case the transfer capability of a call from ISDN is data open with transparent coder. Access: Instant. AC INI-Param: TRANSPARENTCODERONDATACALL Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWSupportRedirectInFacility | 1.3.6.1.4.1.5003.9.10.3.1.1.3.10 | integer | read-write |
Search for redirect number in facility IE. Access: Instant. AC INI-Param: SUPPORTREDIRECTINFACILITY Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWPIForDisconnectMsg | 1.3.6.1.4.1.5003.9.10.3.1.1.3.11 | integer32 | read-write |
Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| digitalGWConnectOnProgressInd | 1.3.6.1.4.1.5003.9.10.3.1.1.3.12 | integer | read-write |
FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: CONNECTONPROGRESSIND Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWLocalISDNRBSource | 1.3.6.1.4.1.5003.9.10.3.1.1.3.13 | integer | read-write |
If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE Enumeration: 'pbx': 0, 'gateway': 1. |
| digitalGWEnableUuiTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.3.14 | integer | read-write |
Enable User-User IE to pass in Setup from ISDN to IP. Access: Instant. AC INI-Param: ENABLEUUITEL2IP Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWEnableUuiIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.3.15 | integer | read-write |
Enable User-User IE to pass in Setup from IP to ISDN. Access: Instant. AC INI-Param: ENABLEUUIIP2TEL Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWSendISDNTransferOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.1.3.16 | integer | read-write |
Send TBCT/ECT/RLT request only when second leg call is connected. Access: Instant. AC INI-Param: SENDISDNTRANSFERONCONNECT Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWEnableISDNTunnelingTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.3.17 | integer | read-write |
Enable ISDN tunneling to pass Setup and Facility messages from ISDN to IP. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGTEL2IP Enumeration: 'usingHeader': 1, 'usingBody': 2, 'disable': 0. |
| digitalGWEnableISDNTunnelingIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.3.18 | integer | read-write |
Enable ISDN tunneling to pass Setup and Facility messages from IP to ISDN. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGIP2TEL Enumeration: 'usingHeader': 1, 'usingBody': 2, 'disable': 0. |
| digitalGWEnableCallingPartyCategory | 1.3.6.1.4.1.5003.9.10.3.1.1.3.19 | integer | read-write |
Enables NI2 calling party category translation to SIP. Access: Instant. AC INI-Param: ENABLECALLINGPARTYCATEGORY Enumeration: 'enable': 1, 'disable': 0. |
| iE | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20 | |||
| iEAddIEInSetup | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.1 | snmpadminstring | read-write |
Additional information element to send in ISDN Setup message. Access: Instant. AC INI-Param: ADDIEINSETUP |
| iESendIEOnTG | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.2 | snmpadminstring | read-write |
Configure trunk groups on which to send additional IE. Access: Instant. AC INI-Param: SENDIEONTG |
| iSDNRxOverlapTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21 | no-access |
Choose either: Disabled or Enabled (default). Any number bigger than one = Number of digits to receive. Note 1: If enabled, the Mediant 2000 receives ISDN called number that is sent in the 'Overlap' mode. Note 2: The SETUP to IP is sent only after the number (including 'Sending Complete' Info Element) was fully received (via SETUP and/or subsequent INFO Q.931 messages). |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1 | no-access | |||
| iSDNRxOverlapIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| iSDNRxOverlapEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.2 | integer | read-write |
Receive overlap from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP Enumeration: 'none': 0, 'throughSIP': 2, 'localReceiving': 1. |
| trunkTransferTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22 | no-access |
Trunk Transfer Mode table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1 | no-access | |||
| trunkTransferIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| trunkTransferMode | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.2 | integer | read-write |
The type of transfer the PSTN/PBX supports. Access: Instant. AC INI-Param: TRUNKTRANSFERMODE Enumeration: 'none': 0, 'casNFA': 1, 'casNormal': 3, 'qSIGPathReplacement': 5, 'qSIGSingleStep': 4, 'iSDN': 2. |
| progressIndicatorToISDNTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23 | no-access |
Progress Indicator To ISDN table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1 | no-access | |||
| progressIndicatorToISDNIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| progressIndicatorToISDNValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.2 | integer | read-write |
Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN Enumeration: 'remoteRB1': 1, 'notSet': -1, 'localRB': 0, 'remoteRB8': 8. |
| playRBToneToTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24 | no-access |
Play RB Tone To Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1 | no-access | |||
| playRBToneToTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| playRBToneToTrunkValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.2 | integer | read-write |
Enable ringback tone playing towards trunk side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TRUNK Enumeration: 'doNotPlay': 0, 'playLocalUntilRemoteMediaArrives': 3, 'playOnLocal': 1, 'notConfigured': -1, 'preferIp': 2. |
| iSDNTransferCapabilityTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25 | no-access |
ISDN Transfer Capability Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1 | no-access | |||
| iSDNTransferCapabilityIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| iSDNTransferCapabilityValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.2 | integer | read-write |
Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY Enumeration: 'audio': 3, 'voice': 1, 'modem': 0, 'data': 2, 'doNotOverwrite': -1. |
| localISDNRBSourceTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26 | no-access |
Play RB Tone To Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1 | no-access | |||
| localISDNRBSourceIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| localISDNRBSourceValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.2 | integer | read-write |
If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE Enumeration: 'pbx': 0, 'gateway': 1. |
| pIForDisconnectMsgTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27 | no-access |
PI For Disconnect Message Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1 | no-access | |||
| pIForDisconnectMsgIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| pIForDisconnectMsgValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.2 | integer32 | read-write |
Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| pSTNAlertTimeoutTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28 | no-access |
PSTN Alert Timeout |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1 | no-access | |||
| pSTNAlertTimeoutIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| pSTNAlertTimeoutValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.2 | integer32 | read-write |
Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: TRUNKPSTNALERTTIMEOUT |
| mlpp | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29 | |||
| mlppCallPriorityMode | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.1 | integer | read-write |
Priority mode: 0-disable 1-MLPP. Access: Instant. AC INI-Param: CALLPRIORITYMODE Enumeration: 'disable': 0, 'mLPP': 1. |
| mlppDefaultNamespace | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.2 | integer | read-write |
MLPP Default Namespace. Access: Instant. AC INI-Param: MLPPDEFAULTNAMESPACE Enumeration: 'dSN': 1, 'dRSN': 3, 'dOD': 2. |
| mlppDefaultCallPriority | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.3 | snmpadminstring | read-write |
SIP Default Call Priority. Access: Instant. AC INI-Param: SIPDEFAULTCALLPRIORITY |
| mlppDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.4 | unsigned32 | read-write |
DiffServ value for MLPP calls. Access: Instant. AC INI-Param: MLPPDIFFSERV |
| mlppPreemptionToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.5 | unsigned32 | read-write |
Preemption Tone Duration, 0-60 seconds. Access: Instant. AC INI-Param: PreemptionToneDuration |
| mlppDefaultServiceDomain | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.6 | snmpadminstring | read-write |
MLPP Default Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPDefaultServiceDomain |
| mlppNormalizedServiceDomain | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.7 | snmpadminstring | read-write |
MLPP Normalized Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPNormalizedServiceDomain |
| mlppRoutineRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.8 | integer32 | read-write |
Defines the RTP DSCP for MLPP Routine call. Access: Instant. AC INI-Param: MLPPROUTINERTPDSCP |
| mlppPriorityRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.9 | integer32 | read-write |
Defines the RTP DSCP for MLPP Priority call. Access: Instant. AC INI-Param: MLPPPRIORITYRTPDSCP |
| mlppImmediateRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.10 | integer32 | read-write |
Defines the RTP DSCP for MLPP Immediate call. Access: Instant. AC INI-Param: MLPPIMMEDIATERTPDSCP |
| mlppFlashRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.11 | integer32 | read-write |
Defines the RTP DSCP for MLPP Flash call. Access: Instant. AC INI-Param: MLPPFLASHRTPDSCP |
| mlppFlashOverRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.12 | integer32 | read-write |
Defines the RTP DSCP for MLPP Flash-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVERRTPDSCP |
| mlppFlashOverOverRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.13 | integer32 | read-write |
Defines the RTP DSCP for MLPP Flash-Override-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVEROVERRTPDSCP |
| mlppE911Behavior | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.14 | integer | read-write |
Defines the MLPP E911 Preemption mode: (0)-Standard Mode (ets calls will have the highest priority and can preemt any mlpp call), (1)-Treat as routine mode (ets calls are treated as routine calls). Access: Instant. AC INI-Param: E911MLPPBEHAVIOR Enumeration: 'standardMode': 0, 'routineMode': 1. |
| digitalGWPlayRBTOnISDNTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.3.40 | integer | read-write |
Play local RBT on TBCT/ECT/RLT transfer. Access: Instant. AC INI-Param: PLAYRBTONISDNTRANSFER Enumeration: 'enable': 1, 'disable': 0. |
| analogGW | 1.3.6.1.4.1.5003.9.10.3.1.1.4 | |||
| analogGWEnableReversalPolarity | 1.3.6.1.4.1.5003.9.10.3.1.1.4.1 | integer | read-write |
FXO: CONNECT/DISCONNECT calls upon detection of polarity signal. FXS: generate the signal. Access: Instant. AC INI-Param: ENABLEREVERSALPOLARITY Enumeration: 'yes': 1, 'no': 0. |
| analogGWEnableCurrentDisconnect | 1.3.6.1.4.1.5003.9.10.3.1.1.4.2 | integer | read-write |
Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: ENABLECURRENTDISCONNECT Enumeration: 'yes': 1, 'no': 0. |
| analogGWRegretTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.3 | unsigned32 | read-write |
Time to wait between phone hang up and call termination. Access: Instant. AC INI-Param: REGRETTIME |
| analogGWHotLineToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.4.4 | unsigned32 | read-write |
Duration of played hotline tone, after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: HOTLINETONEDURATION |
| fxs | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10 | |||
| fxsCutThrough | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.1 | integer | read-write |
Enable call connection without On-Hook/Off-Hook process 'Cut-Through'. Access: Instant. AC INI-Param: CUTTHROUGH Enumeration: 'enable': 1, 'disable': 0. |
| fxsMeteringMode | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.2 | integer | read-write |
Method of automatic generation of payphone metering pulses. Access: Instant. AC INI-Param: PAYPHONEMETERINGMODE Enumeration: 'routingTable': 1, 'disable': 0. |
| fxsFXSOOSBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.3 | integer | read-write |
FxsOosBehavior control how the fxs endpoints of a gateway, will behave in case of Out of Service. OutofService state may be result of two scenarios: a. EndPoint not configured in trunkgroup (Disabled) b. runtime busy out situation 0: NONE - no special activity. Disabled endpoint not responses, bsyout endpoint responses as usual 1: Play ReOrder tone 2: Reverse Polarity 3: Play ReOrder tone and Reverse Polarity. Access: Instant. AC INI-Param: FXSOOSBEHAVIOR Enumeration: 'currentDisconnect': 4, 'none': 0, 'polarityReversal': 2, 'reorderTone': 1. |
| fxsSetOOSOnRegistrationFail | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.4 | integer | read-write |
Should deactivate endpoint service on registration failure. Access: Instant. AC INI-Param: OOSONREGISTRATIONFAIL Enumeration: 'enable': 1, 'disable': 0. |
| chargeCodesTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1 | no-access | |||
| chargeCodesIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.1 | unsigned32 | no-access |
Charge code index. AC INI-Param: ChargeCode_Index |
| chargeCodesRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| chargeCodesAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| chargeCodesActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| chargeCodesPeriod1EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.5 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_EndTime1 |
| chargeCodesPeriod1PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.6 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulseInterval1 |
| chargeCodesPeriod1PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.7 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer1 |
| chargeCodesPeriod2EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.8 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_EndTime2 |
| chargeCodesPeriod2PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.9 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulseInterval2 |
| chargeCodesPeriod2PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.10 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer2 |
| chargeCodesPeriod3EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.11 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_EndTime3 |
| chargeCodesPeriod3PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.12 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulseInterval3 |
| chargeCodesPeriod3PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.13 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer3 |
| chargeCodesPeriod4EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.14 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_EndTime4 |
| chargeCodesPeriod4PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.15 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulseInterval4 |
| chargeCodesPeriod4PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.16 | unsigned32 | read-only |
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer4 |
| toneIndexTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1 | no-access | |||
| toneIndexIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.1 | unsigned32 | no-access |
Charge code index. AC INI-Param: ToneIndex_Index |
| toneIndexRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| toneIndexAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| toneIndexActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| toneIndexFXSPortFirst | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.5 | unsigned32 | read-only |
Staring Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_First |
| toneIndexFXSPortLast | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.6 | unsigned32 | read-only |
End Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_Last |
| toneIndexSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.7 | snmpadminstring | read-only |
Source Prefix. Access: Instant. AC INI-Param: ToneIndex_SourcePrefix |
| toneIndexPriorityIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.8 | unsigned32 | read-only |
Index used for distinctive ringing and call waiting tones. Access: Instant. AC INI-Param: ToneIndex_PriorityIndex |
| fxo | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11 | |||
| fxoIsTwoStageDial | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.1 | integer | read-write |
Dialing Mode - One-Stage (PBX Pass-thru) or Two-Stage. Access: Instant. AC INI-Param: ISTWOSTAGEDIAL Enumeration: 'twoStages': 1, 'oneStage': 0. |
| fxoWaitForDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.2 | integer | read-write |
Wait for dial tone before initiating an outgoing call to PBX/PSTN (FXO one-stage dialing mode). Access: Instant. AC INI-Param: ISWAITFORDIALTONE Enumeration: 'yes': 1, 'no': 0. |
| fxoWaitForDialTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.3 | unsigned32 | read-write |
Time delay between seizing the line and start dialing (if ISWAITFORDIALTONE disabled) or after hookflash before dialing. Access: Instant. AC INI-Param: WAITFORDIALTIME |
| fxoBetweenRingTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.4 | unsigned32 | read-write |
Timeout for releasing FXO to IP call, if FXO port doesn't detect ringing signal for this timeout. Access: Instant. AC INI-Param: FXOBETWEENRINGTIME |
| fxoEnableVoiceDetection | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.5 | integer | read-write |
On FXO GWs enables sending of connect/200 OK message on speech/fax/modem detection [default 0]. In order to activate feature DSPVersionTemplateNumber should be 2 or 3. Access: Instant. AC INI-Param: ENABLEVOICEDETECTION Enumeration: 'yes': 1, 'no': 0. |
| fxoRingsBeforeCallerID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.6 | unsigned32 | read-write |
Number of rings after which the Caller ID is detected. Access: Instant. AC INI-Param: RINGSBEFORECALLERID |
| fxoGuardTimeBetweenCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.7 | unsigned32 | read-write |
Only for FXO: the time between the time that the EP execute OnHook, to the time that this EP is capable to except new IP2TEL call (and execute OfHook). Access: Instant. AC INI-Param: GUARDTIMEBETWEENCALLS |
| fxoAutoDialPlayBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.8 | integer | read-write |
Only for FXO, Tel2IP calls: If enable (1) - On receiving release, if autodial is used, the FXO seize the line and play Busy/Reorder tone toward the PSTN for Reorder-time duration. . Access: Instant. AC INI-Param: FXOAutoDialPlayBusyTone Enumeration: 'enable': 1, 'disable': 0. |
| dialing | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12 | |||
| dialingMaxDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.1 | unsigned32 | read-write |
Maximum number of digits before dialing starts. Access: Instant. AC INI-Param: MAXDIGITS |
| dialingTimeBetweenDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.2 | unsigned32 | read-write |
Timeout in seconds between dialed digits. Access: Instant. AC INI-Param: TIMEBETWEENDIGITS |
| dialingIsSpecialDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.3 | integer | read-write |
When disabled, pressing special digits (* or #) will terminate digit collection. When enabled, special digits can be received as part of the dialed number or Endpoint phone number. Access: Instant. AC INI-Param: ISSPECIALDIGITS Enumeration: 'yes': 1, 'no': 0. |
| dialingDigitMapping | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.4 | snmpadminstring | read-write |
The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Access: Instant. AC INI-Param: DIGITMAPPING |
| dialingEnableDigitDelivery | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.5 | integer | read-write |
Enable automatic digit delivery to Tel side after line is off-hooked or seized. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY Enumeration: 'enable': 1, 'disable': 0. |
| dialingDialPlanIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.6 | integer32 | read-write |
Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: DIALPLANINDEX |
| autoDialTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1 | no-access | |||
| autoDialIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.1 | unsigned32 | read-only |
Entry number, starting at 0. AC INI-Param: TargetOfChannel_Index |
| autoDialIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.2 | integer | read-write |
Is this index used. AC INI-Param: TargetOfChannel_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| autoDialAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| autoDialActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| autoDialDestPhoneNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.5 | snmpadminstring | read-write |
Access: Instant. AC INI-Param: TargetOfChannel_Destination |
| autoDialType | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.6 | integer | read-write |
Choose auto dial type. Access: Instant. AC INI-Param: TargetOfChannel_Type Enumeration: 'delayHotLine': 2, 'none': 0, 'autoDial': 1. |
| autoDialModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.7 | unsigned32 | read-only |
Channels Module. AC INI-Param: TargetOfChannel_Module |
| autoDialPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.8 | unsigned32 | read-only |
Channels Port. AC INI-Param: TargetOfChannel_Port |
| callerID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13 | |||
| callerIDEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.1 | integer | read-write |
FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: ENABLECALLERID Enumeration: 'yes': 1, 'no': 0. |
| callerDisplayTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1 | no-access | |||
| callerDisplayIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.1 | unsigned32 | read-only |
Entry number, starting at 0. AC INI-Param: CallerDisplayInfo_Index |
| callerDisplayIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.2 | integer | read-write |
Is this index used. AC INI-Param: CallerDisplayInfo_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| callerDisplayAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| callerDisplayActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| callerDisplayCallerDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.5 | snmpadminstring | read-write |
Caller Name. Access: Instant. AC INI-Param: CallerDisplayInfo_DisplayString |
| callerDisplayRestriction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.6 | integer | read-write |
Restriction. Access: Instant. AC INI-Param: CallerDisplayInfo_IsCidRestricted Enumeration: 'blocked': 1, 'notBlocked': 0. |
| callerDisplayModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.7 | unsigned32 | read-only |
Channels Module. AC INI-Param: CallerDisplayInfo_Module |
| callerDisplayPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.8 | unsigned32 | read-only |
Channels Port. AC INI-Param: CallerDisplayInfo_Port |
| callerIDperPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1 | no-access | |||
| callerIDperPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.1 | unsigned32 | read-only |
. AC INI-Param: EnableCallerId_Index |
| callerIDperPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.2 | integer | read-write |
Is this index used. Access: Offline. AC INI-Param: EnableCallerId_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| callerIDperPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| callerIDperPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| callerIDperPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.5 | integer | read-write |
Enable. Access: Instant. AC INI-Param: EnableCallerId_IsEnabled Enumeration: 'valueNotSet': 255, 'enable': 1, 'disable': 0. |
| callerIDperPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.6 | unsigned32 | read-only |
Channels Module. AC INI-Param: EnableCallerId_Module |
| callerIDperPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.7 | unsigned32 | read-only |
Channels Port. AC INI-Param: EnableCallerId_Port |
| keypadFeatures | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14 | |||
| keypadFeaturesCFUncond | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.1 | snmpadminstring | read-write |
Keying sequence for activating immediate Call Forward. Access: Instant. AC INI-Param: KEYCFUNCOND |
| keypadFeaturesCFDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.2 | snmpadminstring | read-write |
Keying sequence for deactivating Call Forward. Access: Instant. AC INI-Param: KEYCFDEACT |
| keypadFeaturesCFNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.3 | snmpadminstring | read-write |
Keying sequence for activating Call Forward on no answer. Access: Instant. AC INI-Param: KEYCFNOANSWER |
| keypadFeaturesCFBusy | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.4 | snmpadminstring | read-write |
Keying sequence for activating Call Forward on busy. Access: Instant. AC INI-Param: KEYCFBUSY |
| keypadFeaturesCLIR | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.5 | snmpadminstring | read-write |
Keying sequence for activating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIR |
| keypadFeaturesCLIRDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.6 | snmpadminstring | read-write |
Keying sequence for deactivating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIRDEACT |
| keypadFeaturesHotLine | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.7 | snmpadminstring | read-write |
Keying sequence for activating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINE |
| keypadFeaturesHotLineDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.8 | snmpadminstring | read-write |
Keying sequence for deactivating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINEDEACT |
| keypadFeaturesCFBusyOrNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.9 | snmpadminstring | read-write |
Keying sequence for activating Call Forward on busy or no answer. Access: Instant. AC INI-Param: KEYCFBUSYORNOANSWER |
| keypadFeaturesCFDoNotDisturb | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.10 | snmpadminstring | read-write |
Keying sequence for activating Do Not Disturb. Access: Instant. AC INI-Param: KEYCFDONOTDISTURB |
| keypadFeaturesBlindTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.11 | snmpadminstring | read-write |
Keying sequence for performing blind transfer. Access: Instant. AC INI-Param: KEYBLINDTRANSFER |
| keypadFeaturesKeypadFeaturesCW | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.12 | snmpadminstring | read-write |
Keying sequence for activating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| keypadFeaturesKeypadFeaturesCWDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.13 | snmpadminstring | read-write |
Keying sequence for deactivating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| keypadFeaturesRejectAnonymousCall | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.14 | snmpadminstring | read-write |
Key pad pattern for rejecting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCall |
| keypadFeaturesRejectAnonymousCallDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.15 | snmpadminstring | read-write |
Key pad pattern for accepting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCallDeact |
| portName | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15 | |||
| namesTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1 | no-access | |||
| namesIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.1 | unsigned32 | read-only |
Entry number, starting at 0. AC INI-Param: PortName_Index |
| namesIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.2 | integer | read-write |
Is this index used. AC INI-Param: PortName_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| namesAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| namesActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| namesPortName | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.5 | snmpadminstring | read-write |
Access: Instant. AC INI-Param: PortName_Name |
| namesModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.6 | unsigned32 | read-only |
Module. AC INI-Param: PortName_Module |
| namesPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.7 | unsigned32 | read-only |
Port. AC INI-Param: PortName_Port |
| dID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16 | |||
| dIDEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.1 | integer | read-write |
Enable DID support. Access: Instant. AC INI-Param: ENABLEDID Enumeration: 'enable': 1, 'disable': 0. |
| dIDEnableWink | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.2 | integer | read-write |
Enable support for DID lines using Wink. Access: Instant. AC INI-Param: ENABLEDIDWINK Enumeration: 'enable': 1, 'disable': 0. |
| dIDDelayBeforeDidWink | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.3 | unsigned32 | read-write |
delay between Off-Hook detection and Wink generation (relevant only for FXS). unit - ms. Access: Instant. AC INI-Param: DELAYBEFOREDIDWINK |
| enableDidPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1 | no-access | |||
| enableDidPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.1 | unsigned32 | read-only |
. AC INI-Param: EnableDid_Index |
| enableDidPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.2 | integer | read-write |
Is this index used. Access: Offline. AC INI-Param: EnableDid_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| enableDidPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| enableDidPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| enableDidPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.5 | integer | read-write |
Enable. Access: Instant. AC INI-Param: EnableDid_IsEnable Enumeration: 'yes': 1, 'no': 0. |
| enableDidPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.6 | unsigned32 | read-only |
Channels Module. AC INI-Param: EnableDid_Module |
| enableDidPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.7 | unsigned32 | read-only |
Channels Port. AC INI-Param: EnableDid_Port |
| enableCallWaitingPerPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1 | no-access |
table |
||
| enableCallWaitingPerPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.1 | unsigned32 | read-only |
. AC INI-Param: CallWaitingPerPort_Index |
| enableCallWaitingPerPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.2 | integer | read-write |
Is this index used. Access: Instant. AC INI-Param: CallWaitingPerPort_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| enableCallWaitingPerPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.3 | unsigned32 | read-only |
module. AC INI-Param: CallWaitingPerPort_Module |
| enableCallWaitingPerPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.4 | unsigned32 | read-only |
port. AC INI-Param: CallWaitingPerPort_Port |
| enableCallWaitingPerPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.5 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| enableCallWaitingPerPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.6 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| enableCallWaitingPerPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.7 | integer | read-write |
Enable. Access: Instant. AC INI-Param: CallWaitingPerPort_IsEnabled Enumeration: 'valueNotSet': 255, 'yes': 1, 'no': 0. |
| mediaGW | 1.3.6.1.4.1.5003.9.10.3.1.1.5 | |||
| mediaGWMediaChannels | 1.3.6.1.4.1.5003.9.10.3.1.1.5.1 | unsigned32 | read-write |
Number of channels associated with media services (announcements, conferencing). Access: Offline. AC INI-Param: MEDIACHANNELS |
| conference | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10 | |||
| conferenceID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.1 | snmpadminstring | read-write |
Identification of conference call (To be used by SIP INVITE). Access: Instant. AC INI-Param: CONFERENCEID |
| conferenceBipOnConference | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.2 | integer | read-write |
Beep when a new participant joins a conference. Access: Instant. AC INI-Param: BIPONCONFERENCE Enumeration: 'yes': 1, 'no': 0. |
| conferenceEnableDTMFReporting | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.3 | integer | read-write |
EnableConferenceDTMFReporting- if enable report in out of band format about detected DTMF digits (values 1-Report,0 - Not Report). Access: Instant. AC INI-Param: EnableConferenceDTMFReporting Enumeration: 'enable': 1, 'disable': 0. |
| conferenceEnableDTMFClamping | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.4 | integer | read-write |
EnableConferenceDTMFClamp - if enable remove detected DTMF digits from the audio stream on simple conference participant. Access: Instant. AC INI-Param: EnableConferenceDTMFClamp Enumeration: 'enable': 1, 'disable': 0. |
| conference3WayMode | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.5 | integer | read-write |
If 3wayConferenceMode=0, the usual conference mode will be used, this mode wil be compatible with our IPmedia server. The INVITE messages that are used to form a conference call, all will contain the same conIfD in sip INVITE requests. If 3wayConferenceMode=1, only the first INVITE send to conference server will use the confID. In contact header of 200OK response, the conference server returns a conference URI. This conference URI will be included (by our MP gateway) in REFER-TO header in the REFER messages, send by the MP GW to other sip clients. The sip client will join to conference by sending INVITEs to the conference server using this conference URI . 3wayConferenceMode = 2: InBoard 3w Conference. Access: Instant. AC INI-Param: 3WAYCONFERENCEMODE Enumeration: 'noneAudioCodesMediaServer': 1, 'audioCodesMediaServer': 0, 'onBoard': 2. |
| conferenceMaxInBoardCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.6 | unsigned32 | read-write |
Max InBoard Conference Calls. Access: Offline. AC INI-Param: MaxInBoardConferenceCalls |
| acTWCnonAllocateablePortsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1 | no-access | |||
| acTWCnonAllocateablePortsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.1 | unsigned32 | no-access |
Line index. AC INI-Param: N/A |
| acTWCnonAllocateablePortsNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.2 | unsigned32 | read-write |
Define the Ports that are not hit by 3w conference feature. Access: Instant. AC INI-Param: 3WayConfNoneAllocateablePorts |
| announcement | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11 | |||
| announcementID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.1 | snmpadminstring | read-write |
Identification of a play voice prompt call (To be used by SIP INVITE). Access: Instant. AC INI-Param: ANNOUNCEMENTID |
| announcementNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.2 | unsigned32 | read-write |
Number of Annuncment endpoints. Access: Offline. AC INI-Param: NUMOFANNOUNCENDPOINTS |
| announcementToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.3 | snmpadminstring | read-write |
Identification of a play call progress tone call (To be used by SIP INVITE). Access: Instant. AC INI-Param: TONEID |
| streaming | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10 | |||
| streamingID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.1 | snmpadminstring | read-write |
Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: STREAMINGID |
| streamingNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.2 | unsigned32 | read-write |
Number of Streaming endpoints. Access: Offline. AC INI-Param: NUMOFSTREAMINGENDPOINTS |
| streamingRecordScriptPath | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.3 | snmpadminstring | read-write |
Identification of HTTP Record Script (To be used by FOR RECORD). Access: Offline. AC INI-Param: RecordScriptPath |
| streamingMediaID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.4 | snmpadminstring | read-write |
Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: MediaStreamingID |
| streamingStopRecordingOnNoSpeachTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.5 | integer32 | read-write |
Timeout for no speech detection used to stop recording. Access: Instant. AC INI-Param: STOPRECORDINGONNOSPEACHTIMEOUT |
| streamingPlayFromID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.6 | snmpadminstring | read-write |
Identification of voice stream play location (To be used by SIP INVITE). Access: Instant. AC INI-Param: PLAYFROMID |
| streamingRecordToID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.7 | snmpadminstring | read-write |
Identification of voice stream recording location (To be used by SIP INVITE). Access: Instant. AC INI-Param: RECORDTOID |
| streamingNetAnnAnncID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.8 | snmpadminstring | read-write |
NetAnn Announcement ID. Access: Instant. AC INI-Param: NETANNANNCID |
| streamingMscmlID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.9 | snmpadminstring | read-write |
Identification of HTTP played voice prompt using mscml(To be used by SIP INVITE). Access: Instant. AC INI-Param: MSCMLID |
| streamingMonitorID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.10 | snmpadminstring | read-write |
Identification of Calea call (To be used by SIP INVITE). Access: Instant. AC INI-Param: MONITORID |
| vxml | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12 | |||
| vxmlID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.1 | snmpadminstring | read-write |
Identification of VoiceXML call (To be used by SIP INVITE). Access: Instant. AC INI-Param: VXMLID |
| vxmlNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.2 | unsigned32 | read-write |
Number of VXML endpoints. Access: Offline. AC INI-Param: NUMOFVXMLENDPOINTS |
| calea | 1.3.6.1.4.1.5003.9.10.3.1.1.5.13 | |||
| caleaInterceptionDirection | 1.3.6.1.4.1.5003.9.10.3.1.1.5.13.1 | integer | read-write |
Defines the direction of interception of a BCT listener. Access: Offline. AC INI-Param: INTERCEPTIONDIRECTION Enumeration: 'outgoing': 0, 'incoming': 1. |
| transcoding | 1.3.6.1.4.1.5003.9.10.3.1.1.5.14 | |||
| transcodingID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.14.1 | snmpadminstring | read-write |
SIP Transcoding ID. Access: Instant. AC INI-Param: TRANSCODINGID |
| coders | 1.3.6.1.4.1.5003.9.10.3.1.1.6 | |||
| codersTable | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1 | no-access |
The names of the five possible coders. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1 | no-access | |||
| codersIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: CoderName_Index |
| codersRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| codersAction | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| codersActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| codersName | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.5 | integer | read-only |
Coder Name. Access: Offline. AC INI-Param: N/A Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.6 | unsigned32 | read-only |
Coder Interval. Access: Offline. AC INI-Param: CoderName_PacketInterval |
| codersRate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.7 | unsigned32 | read-only |
Rate in bit per second. Access: Offline. AC INI-Param: CoderName_rate |
| codersPayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.8 | unsigned32 | read-only |
Payload type. Access: Offline. AC INI-Param: CoderName_PayloadType |
| codersSilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.9 | integer | read-only |
Silence Suppression. Access: Offline. AC INI-Param: CoderName_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| codersGroup0Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1 | no-access | |||
| codersGroup0Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.1 | unsigned32 | no-access |
Index Field for line. AC INI-Param: CodersGroup0_Index |
| codersGroup0RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.2 | rowstatus | read-only |
ROWSTATUS field for line. AC INI-Param: N/A |
| codersGroup0Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.3 | integer | read-only |
Mangement Field for ACTIONS. AC INI-Param: N/A Enumeration: 'none': 0. |
| codersGroup0ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.4 | integer | read-only |
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A Enumeration: 'succeeded': 0. |
| codersGroup0Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.5 | integer | read-only |
Coders Group name. Access: Instant. AC INI-Param: CodersGroup0_Name Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersGroup0PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.6 | unsigned32 | read-only |
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup0_pTime |
| codersGroup0Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.7 | unsigned32 | read-only |
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup0_rate |
| codersGroup0PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.8 | integer32 | read-only |
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup0_PayloadType |
| codersGroup0SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.9 | integer | read-only |
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup0_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| codersGroup1Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1 | no-access | |||
| codersGroup1Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.1 | unsigned32 | no-access |
Index Field for line. AC INI-Param: CodersGroup1_Index |
| codersGroup1RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.2 | rowstatus | read-only |
ROWSTATUS field for line. AC INI-Param: N/A |
| codersGroup1Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.3 | integer | read-only |
Mangement Field for ACTIONS. AC INI-Param: N/A Enumeration: 'none': 0. |
| codersGroup1ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.4 | integer | read-only |
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A Enumeration: 'succeeded': 0. |
| codersGroup1Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.5 | integer | read-only |
Coders Group name. Access: Instant. AC INI-Param: CodersGroup1_Name Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersGroup1PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.6 | unsigned32 | read-only |
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup1_pTime |
| codersGroup1Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.7 | unsigned32 | read-only |
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup1_rate |
| codersGroup1PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.8 | unsigned32 | read-only |
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup1_PayloadType |
| codersGroup1SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.9 | integer | read-only |
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup1_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| codersGroup2Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1 | no-access | |||
| codersGroup2Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.1 | unsigned32 | no-access |
Index Field for line. AC INI-Param: CodersGroup2_Index |
| codersGroup2RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.2 | rowstatus | read-only |
ROWSTATUS field for line. AC INI-Param: N/A |
| codersGroup2Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.3 | integer | read-only |
Mangement Field for ACTIONS. AC INI-Param: N/A Enumeration: 'none': 0. |
| codersGroup2ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.4 | integer | read-only |
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A Enumeration: 'succeeded': 0. |
| codersGroup2Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.5 | integer | read-only |
Coders Group name. Access: Instant. AC INI-Param: CodersGroup2_Name Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersGroup2PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.6 | unsigned32 | read-only |
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup2_pTime |
| codersGroup2Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.7 | unsigned32 | read-only |
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup2_rate |
| codersGroup2PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.8 | integer32 | read-only |
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup2_PayloadType |
| codersGroup2SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.9 | integer | read-only |
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup2_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| codersGroup3Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1 | no-access | |||
| codersGroup3Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.1 | unsigned32 | no-access |
Index Field for line. AC INI-Param: CodersGroup3_Index |
| codersGroup3RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.2 | rowstatus | read-only |
ROWSTATUS field for line. AC INI-Param: N/A |
| codersGroup3Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.3 | integer | read-only |
Mangement Field for ACTIONS. AC INI-Param: N/A Enumeration: 'none': 0. |
| codersGroup3ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.4 | integer | read-only |
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A Enumeration: 'succeeded': 0. |
| codersGroup3Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.5 | integer | read-only |
Coders Group name. Access: Instant. AC INI-Param: CodersGroup3_Name Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersGroup3PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.6 | unsigned32 | read-only |
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup3_pTime |
| codersGroup3Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.7 | unsigned32 | read-only |
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup3_rate |
| codersGroup3PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.8 | integer32 | read-only |
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup3_PayloadType |
| codersGroup3SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.9 | integer | read-only |
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup3_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| codersGroup4Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1 | no-access | |||
| codersGroup4Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.1 | unsigned32 | no-access |
Index Field for line. AC INI-Param: CodersGroup4_Index |
| codersGroup4RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.2 | rowstatus | read-only |
ROWSTATUS field for line. AC INI-Param: N/A |
| codersGroup4Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.3 | integer | read-only |
Mangement Field for ACTIONS. AC INI-Param: N/A Enumeration: 'none': 0. |
| codersGroup4ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.4 | integer | read-only |
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A Enumeration: 'succeeded': 0. |
| codersGroup4Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.5 | integer | read-only |
Coders Group name. Access: Instant. AC INI-Param: CodersGroup4_Name Enumeration: 'v1501mr': 38, 'eVRC-B': 32, 'eVRC': 22, 'g726r16': 6, 'ms-rta-nb': 39, 'netCoder8': 10, 'gWTransparent': 14, 'g711Alaw64k': 1, 'gsm-ms': 25, 'g7291': 37, 'qCELP': 28, 'g726r24': 7, 'netCoder6-4': 11, 't38': 29, 'g7231': 0, 'netCoder7-2': 12, 'g726r40': 9, 'invalideCoder': 99, 'g711Alaw64k-VBD': 30, 'amr': 23, 'netCoder8-8': 13, 'gsmEfr': 26, 'g711Ulaw64k-VBD': 31, 'g729': 3, 'g711Ulaw64k': 2, 'eg711Alaw': 35, 'g722': 33, 'eg711Ulaw': 36, 'g726': 5, 'aMR-WB': 34, 'g726r32': 8, 'iLBC': 27, 'gsm-fr': 24, 'g729AnnexB': 17. |
| codersGroup4PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.6 | unsigned32 | read-only |
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup4_pTime |
| codersGroup4Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.7 | unsigned32 | read-only |
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup4_rate |
| codersGroup4PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.8 | integer32 | read-only |
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup4_PayloadType |
| codersGroup4SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.9 | integer | read-only |
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup4_Sce Enumeration: 'enable': 1, 'disable': 0, 'enableAdaptations': 2. |
| supServices | 1.3.6.1.4.1.5003.9.10.3.1.1.7 | |||
| supServicesEnableHold | 1.3.6.1.4.1.5003.9.10.3.1.1.7.1 | integer | read-write |
Enable Call Hold service. Access: Instant. AC INI-Param: ENABLEHOLD Enumeration: 'yes': 1, 'no': 0. |
| supServicesNameID | 1.3.6.1.4.1.5003.9.10.3.1.1.7.2 | integer | read-write |
Enable Name Identification service. Access: Instant. AC INI-Param: ENABLENAMEIDENTIFICATION Enumeration: 'enable': 1, 'disable': 0. |
| supServicesHoldFormat | 1.3.6.1.4.1.5003.9.10.3.1.1.7.3 | integer | read-write |
Call Hold format - Zero IP or 'sendonly' SDP attribute. Access: Instant. AC INI-Param: HOLDFORMAT Enumeration: 'sDPattributesSendonly': 1, 'connectionIP': 0. |
| supServicesSendMeteringMessageToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.7.4 | integer | read-write |
Send metering messages to IP on detection of analog metering pulses. Access: Instant. AC INI-Param: SENDMETERING2IP Enumeration: 'enable': 1, 'disable': 0. |
| supServicesHeldTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.5 | integer32 | read-write |
Maximum time allowed for call to be retreived from IP (seconds). Access: Instant. AC INI-Param: HELDTIMEOUT |
| supServicesHookFlashCode | 1.3.6.1.4.1.5003.9.10.3.1.1.7.6 | snmpadminstring | read-write |
If this code received during session, act as if hook flash received from the TEL side. This parameter can use DIGIT MAP syntax. Access: Instant. AC INI-Param: HookFlashCode |
| supServicesCHRRTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.7 | unsigned32 | read-write |
Call hold reminder ring maximum ringing time (in seconds). Access: Instant. AC INI-Param: CHRRTIMEOUT |
| supServicesEnableHold2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.7.8 | integer | read-write |
Enable Hold/retrieve from and to ISDN. Access: Instant. AC INI-Param: ENABLEHOLD2ISDN Enumeration: 'enable': 1, 'disable': 0. |
| supServicesEnableMOH | 1.3.6.1.4.1.5003.9.10.3.1.1.7.9 | integer | read-write |
FXS: enable playing Music On Hold (instead of Held tone to the PSTN side). Access: Instant. AC INI-Param: EnableMOH Enumeration: 'enable': 1, 'disable': 0. |
| transfer | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10 | |||
| transferEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.1 | integer | read-write |
Enable Call Transfer service. Access: Instant. AC INI-Param: ENABLETRANSFER Enumeration: 'yes': 1, 'no': 0. |
| transferXferPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.2 | snmpadminstring | read-write |
Prefix added to the called number of a transferred call. Access: Instant. AC INI-Param: XFERPREFIX |
| callWaiting | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11 | |||
| callWaitingEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.1 | integer | read-write |
Enable Call Waiting service. Access: Instant. AC INI-Param: ENABLECALLWAITING Enumeration: 'yes': 1, 'no': 0. |
| callWaitingNumberOfIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.2 | unsigned32 | read-write |
Number of Call Waiting indications to be played to the user. Access: Instant. AC INI-Param: NUMBEROFWAITINGINDICATIONS |
| callWaitingTimeBetweenIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.3 | unsigned32 | read-write |
Time between one call waiting indication to the next (seconds). Access: Instant. AC INI-Param: TIMEBETWEENWAITINGINDICATIONS |
| callWaitingWaitingBeepDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.4 | unsigned32 | read-write |
Call Waiting tone beep length (msec). Access: Instant. AC INI-Param: WAITINGBEEPDURATION |
| callWaitingTimeBeforeWaitingIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.5 | unsigned32 | read-write |
Time before call waiting indication is sent to a busy line (seconds). Access: Instant. AC INI-Param: TIMEBEFOREWAITINGINDICATIONS |
| forwardSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12 | |||
| forwardSettingsEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.1 | integer | read-write |
Enable Call Forward service. Access: Instant. AC INI-Param: ENABLEFORWARD Enumeration: 'yes': 1, 'no': 0. |
| forwardTable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1 | no-access | |||
| forwardIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.1 | unsigned32 | read-only |
Entry number, starting at 0. AC INI-Param: FwdInfo_Index |
| forwardIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.2 | integer | read-write |
Is this index used. AC INI-Param: FwdInfo_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| forwardAction | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| forwardActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| forwardForwardType | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.5 | integer | read-write |
Access: Instant. AC INI-Param: FwdInfo_Type Enumeration: 'busy': 1, 'unknown': 0, 'noAnswer': 3, 'immediate': 2, 'busyOrNoAnswer': 4, 'dontDisturb': 5. |
| forwardForwardedToNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.6 | snmpadminstring | read-write |
Access: Instant. AC INI-Param: FwdInfo_Destination |
| forwardTimeForNoReply | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.7 | unsigned32 | read-write |
Access: Instant. AC INI-Param: FwdInfo_NoReplyTime |
| forwardModule | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.8 | unsigned32 | read-only |
Module. AC INI-Param: FwdInfo_Module |
| forwardPort | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.9 | unsigned32 | read-only |
Port. AC INI-Param: FwdInfo_Port |
| mWI | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13 | |||
| mWIEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.1 | integer | read-write |
Enable MWI support (Message Waiting Indicator). Access: Instant. AC INI-Param: ENABLEMWI Enumeration: 'enable': 1, 'disable': 0. |
| mWIAnalogLamp | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.2 | integer | read-write |
Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: MWIANALOGLAMP Enumeration: 'enable': 1, 'disable': 0. |
| mWIDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.3 | integer | read-write |
Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: MWIDISPLAY Enumeration: 'enable': 1, 'disable': 0. |
| mWIServerIP | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.4 | snmpadminstring | read-write |
MWI server IP address. Access: Instant. AC INI-Param: MWISERVERIP |
| mWIExpirationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.5 | unsigned32 | read-write |
MWI service subscription expiration time (seconds). Access: Instant. AC INI-Param: MWIEXPIRATIONTIME |
| mWIServerTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.6 | integer | read-write |
MWI server transport type. Access: Instant. AC INI-Param: MWISERVERTRANSPORTTYPE Enumeration: 'tLS': 2, 'uDP': 0, 'tCP': 1, 'notConfigured': -1. |
| supServicesConference | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14 | |||
| supServicesConferenceEnable3Way | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.1 | integer | read-write |
Enable 3 way conference feature. Access: Offline. AC INI-Param: ENABLE3WAYCONFERENCE Enumeration: 'enable': 1, 'disable': 0. |
| supServicesConferenceEstablishCode | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.2 | snmpadminstring | read-write |
Control Key activation of the 3 way conference. Access: Instant. AC INI-Param: CONFERENCECODE |
| supServicesBlindTransferDisconnectTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.30 | unsigned32 | read-write |
Maximum time (milliseconds) to wait for disconnect from tel before performing blind transfer. Access: Instant. AC INI-Param: BLINDTRANSFERDISCONNECTTIMEOUT |
| tones | 1.3.6.1.4.1.5003.9.10.3.1.1.8 | |||
| tonesTimeForReorderTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.1 | unsigned32 | read-write |
Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TIMEFORREORDERTONE |
| tonesTimeForDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.2 | unsigned32 | read-write |
Duration of played dial tone after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: TIMEFORDIALTONE |
| tonesPlayRBTone2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.8.3 | integer | read-write |
Enable ringback tone playing towards IP. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2IP Enumeration: 'yes': 1, 'no': 0. |
| tonesPlayRBTone2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.8.4 | integer | read-write |
Enable ringback tone playing towards Tel side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TEL Enumeration: 'doNotPlay': 0, 'playLocalUntilRemoteMediaArrives': 3, 'playOnLocal': 1, 'preferIp': 2. |
| tonesStutterToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.8.5 | unsigned32 | read-write |
Time for playing confirmation tone before normal dial tone is played (msec). Access: Instant. AC INI-Param: STUTTERTONEDURATION |
| tonesPlayRBToneXferSuccess | 1.3.6.1.4.1.5003.9.10.3.1.1.8.6 | integer | read-write |
Play RB tone on transfer success. Access: Instant. AC INI-Param: PLAYRBTONEONXFER Enumeration: 'enable': 1, 'disable': 0. |
| tonesFirstCallRBTId | 1.3.6.1.4.1.5003.9.10.3.1.1.8.7 | integer32 | read-write |
the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLRBTID |
| tonesPrecedenceRingingType | 1.3.6.1.4.1.5003.9.10.3.1.1.8.8 | integer32 | read-write |
the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: PRECEDENCERINGINGTYPE |
| tonesFirstCallWaitingToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.8.9 | integer32 | read-write |
The index of the first Call Waiting tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLWAITINGTONEID |
| tonesEnableComfortTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.10 | integer | read-write |
Enable Comfort Tone for playing a patience comfort tone between Invite and 18x response. [0] - Disabled [1] - Enabled. Comfort Tone will be played. Access: Instant. AC INI-Param: ENABLECOMFORTTONE Enumeration: 'enable': 1, 'disable': 0. |
| logger | 1.3.6.1.4.1.5003.9.10.3.1.1.9 | |||
| loggerGwAppCdrReportLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.9.1 | integer | read-write |
CDR reports timing. Access: Instant. AC INI-Param: N/A Enumeration: 'connectAndEndCall': 3, 'endCall': 1, 'startAndEndCall': 2, 'startConnectAndEndCall': 4, 'no': 0. |
| loggerGwDebugLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.9.2 | integer | read-write |
Configure different debug level. Access: Instant. AC INI-Param: N/A Enumeration: 'logLevel200': 200, 'logLevel100': 100, 'logLevel1': 1, 'logLevel0': 0, 'logLevel3': 3, 'logLevel2': 2, 'logLevel5': 5, 'logLevel4': 4. |
| loggerCDRSyslogServerIP | 1.3.6.1.4.1.5003.9.10.3.1.1.9.3 | ipaddress | read-write |
Syslog server IP address for sending CDRs. Access: Instant. AC INI-Param: CDRSYSLOGSERVERIP |
| progressIndicators | 1.3.6.1.4.1.5003.9.10.3.1.1.10 | |||
| progressIndicators2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.10.1 | integer | read-write |
Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN Enumeration: 'remoteRB1': 1, 'notSet': -1, 'localRB': 0, 'remoteRB8': 8. |
| progressIndicators2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.10.2 | integer | read-write |
Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: PROGRESSINDICATOR2IP Enumeration: 'remoteRB1': 1, 'notSet': -1, 'localRB': 0, 'remoteRB8': 8. |
| screeningIndicators | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20 | |||
| screeningIndicators2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.1 | integer | read-write |
Override screening indicator value in Setup messages to IP. Access: Instant. AC INI-Param: SCREENINGIND2IP Enumeration: 'userFailed': 2, 'networkProvided': 3, 'userPassed': 1, 'userProvided': 0, 'notOverwrited': -1. |
| screeningIndicators2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.2 | integer | read-write |
Override screening indicator value in Setup messages to ISDN. Access: Instant. AC INI-Param: SCREENINGIND2ISDN Enumeration: 'userFailed': 2, 'networkProvided': 3, 'userPassed': 1, 'userProvided': 0, 'notOverwrited': -1. |
| misc | 1.3.6.1.4.1.5003.9.10.3.1.1.11 | |||
| miscDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.1 | integer | read-write |
Release call if gateway receives busy or fast busy tone before the call is answered. Access: Instant. AC INI-Param: DISCONNECTONBUSYTONE Enumeration: 'yes': 1, 'no': 0. |
| miscDisconnectOnSilence | 1.3.6.1.4.1.5003.9.10.3.1.1.11.2 | integer | read-write |
Disconnect calls on a configured silence timeout. Access: Offline. AC INI-Param: ENABLESILENCEDISCONNECT Enumeration: 'yes': 1, 'no': 0. |
| miscEnableBusyOut | 1.3.6.1.4.1.5003.9.10.3.1.1.11.3 | integer | read-write |
Take trunks out of service in case of LAN down. Access: Instant. AC INI-Param: ENABLEBUSYOUT Enumeration: 'yes': 1, 'no': 0. |
| miscSecureCallsFromIp | 1.3.6.1.4.1.5003.9.10.3.1.1.11.4 | integer | read-write |
Gateway will only accept calls from IP addresses that are defined in the Tel to IP Routing table. Access: Instant. AC INI-Param: SECURECALLSFROMIP Enumeration: 'yes': 1, 'no': 0. |
| miscStaticNATIP | 1.3.6.1.4.1.5003.9.10.3.1.1.11.5 | snmpadminstring | read-write |
static NAT IP, to be supported by the gateway. Access: Instant. AC INI-Param: STATICNATIP |
| miscSilenceDisconnectTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.11.6 | unsigned32 | read-write |
Defines the Silence period to be detected. Access: Offline. AC INI-Param: FarEndDisconnectSilencePeriod |
| miscIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.11.7 | integer | read-write |
Enable T.38 Fax signaling. Access: Instant. AC INI-Param: IsFaxUsed Enumeration: 'g711': 2, 'fallBack': 3, 'noFax': 0, 't38': 1. |
| miscDelayTime | 1.3.6.1.4.1.5003.9.10.3.1.1.11.8 | unsigned32 | read-write |
Gateway delay time after reset (seconds). Access: Instant. AC INI-Param: GWAPPDelayTime |
| miscDetFaxOnAnswerTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.9 | integer | read-write |
Start T.38 fax procedure after fax answer tone detection or after HDLC preamble signal detection. Access: Instant. AC INI-Param: DETFAXONANSWERTONE Enumeration: 'enable': 1, 'disable': 0. |
| miscDefaultReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.11.10 | unsigned32 | read-write |
The release cause that will be sent to IP or to Tel when gateway initiates release by itself. Access: Instant. AC INI-Param: DEFAULTRELEASECAUSE |
| miscT38UseRTPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.11.11 | integer | read-write |
T.38 packets will be received on RTP port. Access: Instant. AC INI-Param: T38USERTPPORT Enumeration: 'enable': 1, 'disable': 0. |
| miscRFC2833PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.11.12 | unsigned32 | read-write |
control the RFC 2833 Relay RTP Payload type. Access: Instant. AC INI-Param: RFC2833PayloadType |
| miscIsCiscoSceMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.13 | integer | read-write |
In use with G.729 - if enabled and SCE=2 then AnnexB=no. Access: Instant. AC INI-Param: ISCISCOSCEMODE Enumeration: 'enable': 1, 'disable': 0. |
| miscDisconnectOnDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.14 | integer | read-write |
Release call if gateway receives dial tone before the call is answered or during voice session. Access: Instant. AC INI-Param: DISCONNECTONDIALTONE Enumeration: 'enable': 1, 'disable': 0. |
| miscEnableSemiAttendedTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.15 | integer | read-write |
Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER Enumeration: 'enable': 1, 'disable': 0. |
| miscHookFlashCodeIP | 1.3.6.1.4.1.5003.9.10.3.1.1.11.16 | snmpadminstring | read-write |
The string represent HookFlash, when reported to or from IP. Currently used in H.323 only (H245UserOutput, H245Signal or Q931UserInfo). Access: Instant. AC INI-Param: HookFlashCodeIP |
| miscEnableFaxRerouting | 1.3.6.1.4.1.5003.9.10.3.1.1.11.17 | integer | read-write |
Enable rerouting of FAX calls to FAX destination. Access: Instant. AC INI-Param: ENABLEFAXREROUTING Enumeration: 'enable': 1, 'disable': 0. |
| miscT38MaxDatagramSize | 1.3.6.1.4.1.5003.9.10.3.1.1.11.18 | unsigned32 | read-write |
T.38 coder - Max Datagram Size. Access: Instant. AC INI-Param: T38MAXDATAGRAMSIZE |
| miscIsdnDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.19 | integer | read-write |
1 - Release call if gateway receives busy or fast busy tone. 0 - don't release. Access: Instant. AC INI-Param: ISDNDISCONNECTONBUSYTONE Enumeration: 'enable': 1, 'disable': 0. |
| miscFaxCNGMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.20 | integer | read-write |
Enables sending of ReInvite on detection of FAX CNG tone when CNGDetectorMode=1. Access: Instant. AC INI-Param: FAXCNGMODE Enumeration: 'enable': 1, 'disable': 0. |
| miscGracefulBusyOutTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.11.21 | unsigned32 | read-write |
Graceful Busy Out Timeout in seconds. Sets the time before a busy out signal will be sent to a trunk even if there are still active calls on the trunk. Access: Instant. AC INI-Param: GRACEFULBUSYOUTTIMEOUT |
| miscT38FaxMaxBufferSize | 1.3.6.1.4.1.5003.9.10.3.1.1.11.22 | unsigned32 | read-write |
Defines the fax max buffer size in T38 SDP negotiation. Access: Instant. AC INI-Param: T38FAXMAXBUFFERSIZE |
| miscReliableConnectionPersistentMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.23 | integer | read-write |
if set to 1 - All TCP/TLS connections will be set as persistent and will not be released. Access: Instant. AC INI-Param: RELIABLECONNECTIONPERSISTENTMODE Enumeration: 'enable': 1, 'disable': 0. |
| miscWANIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.11.24 | inetaddress | read-write |
Sets the WAN address to be used by VOIP signalling applications. Range = IPv4 address in dotted decimal notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Instant. AC INI-Param: WANIPAddress |
| miscEnableDelayedOffer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.25 | integer | read-write |
Send INVITE message with/without sdp offer. [0] - (default) means SDP will be offered in the INVITE message. [1] - means SDP will be offered by the other side in the first reliable response(1xx or 200 OK INVITE). Access: Instant. AC INI-Param: ENABLEDELAYEDOFFER Enumeration: 'enable': 1, 'disable': 0. |
| miscEnableNRTSubscription | 1.3.6.1.4.1.5003.9.10.3.1.1.11.26 | integer | read-write |
Enable subscription for Call forward ringtone Indicator service. Access: Instant. AC INI-Param: ENABLENRTSUBSCRIPTION Enumeration: 'enable': 1, 'disable': 0. |
| miscASSubscribeIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.11.27 | integer32 | read-write |
IPGroup ID for AS server subscribe purposes. Access: Instant. AC INI-Param: ASSUBSCRIBEIPGROUPID |
| miscNRTSubscriptionRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.1.11.28 | unsigned32 | read-write |
NRT service subscription retry time after last subscription failure (in seconds). Access: Instant. AC INI-Param: NRTSUBSCRIBERETRYTIME |
| miscCallForwardRingToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.11.29 | unsigned32 | read-write |
Ringtone type for Call forward notification. Access: Instant. AC INI-Param: CALLFORWARDRINGTONEID |
| miscKeyCallPickup | 1.3.6.1.4.1.5003.9.10.3.1.1.11.30 | snmpadminstring | read-write |
Keying sequence for performing call pickup. Access: Instant. AC INI-Param: KEYCALLPICKUP |
| miscEnableRFC4117Transcoding | 1.3.6.1.4.1.5003.9.10.3.1.1.11.31 | integer | read-write |
Enable transcoding call RFC4117. Access: Offline. AC INI-Param: ENABLERFC4117TRANSCODING Enumeration: 'enable': 1, 'disable': 0. |
| miscEnableSingleDSPTranscoding | 1.3.6.1.4.1.5003.9.10.3.1.1.11.32 | integer | read-write |
Enable/Disable using single DSP for g711 <--> LBR coder. Access: Instant. AC INI-Param: ENABLESINGLEDSPTRANSCODING Enumeration: 'enable': 1, 'disable': 0. |
| miscEnableNetworkISDNTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.33 | integer | read-write |
if set to 0 reject ISDN transfer request. Access: Instant. AC INI-Param: ENABLENETWORKISDNTRANSFER Enumeration: 'enable': 1, 'disable': 0. |
| miscLDAPocsNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.34 | snmpadminstring | read-write |
The name of the attribute which represents the user OCS number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPOCSNUMATTRIBUTENAME |
| miscLDAPpbxNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.35 | snmpadminstring | read-write |
The name of the attribute which represents the user PBX number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPPBXNUMATTRIBUTENAME |
| miscLDAPMobileNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.36 | snmpadminstring | read-write |
The name of the attribute which represents the user Mobile number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPMOBILENUMATTRIBUTENAME |
| resourceManagement | 1.3.6.1.4.1.5003.9.10.3.1.1.12 | |||
| resourceManagementMaxActiveCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.12.1 | unsigned32 | read-write |
Limit the number of calls that the gateway can handle at the same time. Access: Instant. AC INI-Param: MAXACTIVECALLS |
| resourceManagementIsSelfCheckAuditUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.12.2 | integer | read-write |
defines whether the resources self check audit is used. Access: Instant. AC INI-Param: ISSELFCHECKAUDITUSED Enumeration: 'enable': 1, 'disable': 0. |
| resourceManagementRejectCallsOnOverload | 1.3.6.1.4.1.5003.9.10.3.1.1.12.3 | integer | read-write |
Defines whether new calls will be rejected during overload period. Access: Instant. AC INI-Param: REJECTCALLSONOVERLOAD Enumeration: 'enable': 1, 'disable': 0. |
| resourceManagementDisconnectOnBrokenConnection | 1.3.6.1.4.1.5003.9.10.3.1.1.12.4 | integer | read-write |
Disconnect calls on receiving RTP broken notification. Access: Instant. AC INI-Param: DISCONNECTONBROKENCONNECTION Enumeration: 'enable': 1, 'disable': 0. |
| resourceManagementMaxCallDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.12.5 | unsigned32 | read-write |
Limit the call time duration (minutes) 0 = no limit. Access: Instant. AC INI-Param: MAXCALLDURATION |
| resourceManagementOverloadSensitivityLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.12.6 | integer | read-write |
Defines when to enter overload state: 0:never 1:on very high utilization 2:on medium utilization. Access: Instant. AC INI-Param: OverloadSensitivityLevel Enumeration: 'highUtil': 1, 'medUtil': 2, 'never': 0. |
| aMD | 1.3.6.1.4.1.5003.9.10.3.1.1.13 | |||
| aMDTimeOut | 1.3.6.1.4.1.5003.9.10.3.1.1.13.1 | unsigned32 | read-write |
Amd Detection Timeout |
| aaa | 1.3.6.1.4.1.5003.9.10.3.1.1.14 | |||
| aaaIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.14.1 | integer | read-write |
Which Authentication, Authorization and Accounting indications to use. Access: Instant. AC INI-Param: AAAINDICATIONS Enumeration: 'fullReport': 2, 'none': 0, 'authorizeAndAuthenticate': 1, 'accountingOnly': 3. |
| aaaRadiusAccountingType | 1.3.6.1.4.1.5003.9.10.3.1.1.14.2 | integer | read-write |
When will Radius Acounting messages be sent. Access: Instant. AC INI-Param: RADIUSACCOUNTINGTYPE Enumeration: 'release': 0, 'setupAndRelease': 2, 'connectAndRelease': 1. |
| profile | 1.3.6.1.4.1.5003.9.10.3.1.1.15 | |||
| iPProfileTable | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1 | no-access | |||
| iPProfileIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.1 | unsigned32 | no-access |
Entry number, starting at 1. AC INI-Param: IpProfile_Index |
| iPProfileRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| iPProfileAction | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| iPProfileActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| iPProfilePreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.5 | unsigned32 | read-only |
Preference. Access: Instant. AC INI-Param: IpProfile_IpPreference |
| iPProfileProfileName | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.6 | snmpadminstring | read-only |
Profile Name. Access: Instant. AC INI-Param: IpProfile_ProfileName |
| iPProfileCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.7 | unsigned32 | read-only |
Coders Group ID. Access: Instant. AC INI-Param: IpProfile_CodersGroupID |
| iPProfileFaxTransportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.8 | unsigned32 | read-write |
Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| iPProfileIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.9 | integer | read-only |
Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1. Access: Instant. AC INI-Param: IpProfile_IsFaxUsed Enumeration: 'g711': 2, 'fallBack': 3, 'noFax': 0, 'notConfigured': 255, 't38': 1. |
| iPProfileDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.10 | unsigned32 | read-only |
Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: IpProfile_JitterBufMinDelay |
| iPProfileDJBufOptFactor | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.11 | unsigned32 | read-only |
Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: IpProfile_JitterBufOptFactor |
| iPProfileIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.12 | unsigned32 | read-only |
IP DiffServ byte value. Access: Instant. AC INI-Param: IpProfile_IPDiffServ |
| iPProfileSigIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.13 | unsigned32 | read-only |
Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: IpProfile_SigIPDiffServ |
| iPProfileSCE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.14 | integer | read-only |
Silence Suppression mode. Access: Instant. AC INI-Param: IpProfile_SCE Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255, 'enableWithoutAdaptation': 2. |
| iPProfileRTPRedundancyDepth | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.15 | unsigned32 | read-only |
Enables or disables generation of RFC 2198 redundancy packets. Access: Instant. AC INI-Param: IpProfile_RTPRedundancyDepth |
| iPProfileRemoteBaseUDPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.16 | unsigned32 | read-only |
Remote Base UDP Port For Aggregation. Access: Instant. AC INI-Param: IpProfile_RemoteBaseUDPPort |
| iPProfileCngDetectorMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.17 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_CNGmode Enumeration: 'eventsOnly': 2, 'disable': 0, 'notConfigured': 255, 'relay': 1. |
| iPProfileVxxModemTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.18 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_VxxTransportType Enumeration: 'eventsOnly': 3, 'disable': 0, 'enableBypass': 2, 'notConfigured': 255, 'enableRelay': 1. |
| iPProfileNSEMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.19 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_NSEMode Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| iPProfilePlayRingbackToneToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.20 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_PlayRBTone2IP Enumeration: 'notPlay': 0, 'play': 1, 'notConfigured': 255. |
| iPProfileEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.21 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_EnableEarlyMedia Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| iPProfileProgressIndicatorToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.22 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_ProgressIndicator2IP Enumeration: 'noPI': 0, 'pI1': 1, 'pI8': 8, 'notConfigured': 255. |
| iPProfileECE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.23 | integer | read-only |
Enables or disables the echo canceler. Access: Instant. AC INI-Param: IpProfile_EnableEchoCanceller Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| iPProfileMediaSecurityBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.24 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_MediaSecurityBehaviour Enumeration: 'mandatory': 1, 'preferable': 0, 'notConfigured': -1. |
| iPProfileCallLimit | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.25 | integer32 | read-only |
Access: Instant. AC INI-Param: IpProfile_CallLimit |
| iPProfileDisconnectOnBrokenConnection | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.26 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_DisconnectOnBrokenConnection Enumeration: 'yes': 1, 'notConfigured': -1, 'no': 0. |
| iPProfileCopyDest2RedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.27 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_CopyDest2RedirectNumber Enumeration: 'beforeManipulation': 2, 'disable': 0, 'afterManipulation': 1, 'notConfigured': -1. |
| iPProfileAddIEInSetup | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.28 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IpProfile_AddIEInSetup |
| iPProfileRxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.29 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_RxDTMFOption Enumeration: 'declareRFC2833InSDP': 1, 'notDeclared': 0, 'notConfigured': -1. |
| iPProfileFirstTxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.30 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_FirstTxDtmfOption Enumeration: 'infoKorea': 5, 'notConfigured': -1, 'infoCisco': 3, 'notify': 2, 'notSupported': 0, 'rFC2833': 4, 'infoNortel': 1. |
| iPProfileSecondTxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.31 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_SecondTxDtmfOption Enumeration: 'infoKorea': 5, 'notConfigured': -1, 'infoCisco': 3, 'notify': 2, 'notSupported': 0, 'rFC2833': 4, 'infoNortel': 1. |
| iPProfileMediaIPVersionPreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.32 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_MediaIPVersionPreference Enumeration: 'onlyIPv6': 1, 'onlyIPv4': 0, 'preferIPv4': 2, 'notConfigured': -1, 'preferIPv6': 3. |
| iPProfileSBCAllowedCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.33 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersGroupID Enumeration: 'notConfigured': -1, 'codersGroup1': 1, 'codersGroup0': 0, 'codersGroup3': 3, 'codersGroup2': 2, 'codersGroup4': 4. |
| iPProfileSBCAllowedCodersMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.34 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersMode Enumeration: 'restriction': 0, 'restictionAndPreference': 2, 'preference': 1. |
| iPProfileSBCMediaSecurityBehaviour | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.35 | integer | read-only |
Access: Instant. AC INI-Param: IpProfile_SBCMediaSecurityBehaviour Enumeration: 'both': 3, 'srtp': 1, 'asIs': 0, 'rtp': 2. |
| telProfileTable | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1 | no-access | |||
| telProfileIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.1 | unsigned32 | no-access |
Entry number, starting at 1. AC INI-Param: TelProfile_Index |
| telProfileRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| telProfileAction | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| telProfileActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| telProfilePreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.5 | unsigned32 | read-only |
Preference. Access: Instant. AC INI-Param: TelProfile_TelPreference |
| telProfileProfileName | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.6 | snmpadminstring | read-only |
Profile Name. Access: Instant. AC INI-Param: TelProfile_ProfileName |
| telProfileCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.7 | unsigned32 | read-only |
Coders Group ID. Access: Instant. AC INI-Param: TelProfile_CodersGroupID |
| telProfileFaxTransportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.8 | unsigned32 | read-write |
Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| telProfileIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.9 | integer | read-only |
Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1.0 - No fax , 1- T.38 , 2- Fax Fallback (G.711 with optimization). Access: Instant. AC INI-Param: TelProfile_IsFaxUsed Enumeration: 'g711': 2, 'fallBack': 3, 'noFax': 0, 'notConfigured': 255, 't38': 1. |
| telProfileDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.10 | unsigned32 | read-only |
Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: TelProfile_JitterBufMinDelay |
| telProfileDJBufOptFactor | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.11 | unsigned32 | read-only |
Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: TelProfile_JitterBufOptFactor |
| telProfileIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.12 | unsigned32 | read-only |
IP DiffServ byte value. Access: Instant. AC INI-Param: TelProfile_IPDiffServ |
| telProfileSigIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.13 | unsigned32 | read-only |
Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: TelProfile_SigIPDiffServ |
| telProfileVoiceVolume | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.14 | integer32 | read-only |
Voice Volume. Access: Instant. AC INI-Param: TelProfile_VoiceVolume |
| telProfileDTMFVolume | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.15 | integer32 | read-only |
DTMF Volume. Access: Instant. AC INI-Param: TelProfile_DtmfVolume |
| telProfileInputGain | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.16 | integer32 | read-only |
Input Gain. Access: Instant. AC INI-Param: TelProfile_InputGain |
| telProfileEnableReversalPolarity | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.17 | integer | read-only |
FXO: Connect/Disconnect calls upon detection of polarity reversal signal. FXS: generate the signal. Access: Instant. AC INI-Param: TelProfile_EnableReversePolarity Enumeration: 'yes': 1, 'notConfigured': 255, 'no': 0. |
| telProfileEnableCurrentDisconnect | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.18 | integer | read-only |
Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: TelProfile_EnableCurrentDisconnect Enumeration: 'yes': 1, 'notConfigured': 255, 'no': 0. |
| telProfileEnableDigitDelivery | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.19 | integer | read-only |
Enables Digit delivery to TEL side. Access: Instant. AC INI-Param: TelProfile_EnableDigitDelivery Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| telProfileECE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.20 | integer | read-only |
Enables or disables the echo canceler. Access: Instant. AC INI-Param: TelProfile_EnableEC Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| telProfileMWIanalogLamp | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.21 | integer | read-only |
Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: TelProfile_MWIAnalog Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| telProfileMWIDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.22 | integer | read-only |
Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: TelProfile_MWIDisplay Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| telProfileMaxFlashHookDetectionPeriod | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.23 | unsigned32 | read-only |
Access: Instant. AC INI-Param: TelProfile_FlashHookPeriod |
| telProfileEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.24 | integer | read-only |
Enable Early Media. Access: Instant. AC INI-Param: TelProfile_EnableEarlyMedia Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': 255. |
| telProfileProgressIndicatorToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.25 | integer | read-only |
Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: TelProfile_ProgressIndicator2IP Enumeration: 'noPI': 0, 'pI1': 1, 'pI8': 8, 'notConfigured': 255. |
| telProfileTimeForReorderTone | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.26 | unsigned32 | read-only |
Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TelProfile_TimeForReorderTone |
| telProfileEnableDIDWink | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.27 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_EnableDIDWink Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileIsTwoStageDial | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.28 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_IsTwoStageDial Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.29 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_DisconnectOnBusyTone Enumeration: 'yes': 1, 'notConfigured': -1, 'no': 0. |
| telProfileEnableVoiceMailDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.30 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_EnableVoiceMailDelay Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileDialPlanIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.31 | integer32 | read-only |
Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: TelProfile_DialPlanIndex |
| telProfileEnable911PSAP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.32 | integer | read-only |
GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_Enable911PSAP Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileSwapTelToIpPhoneNumbers | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.33 | integer | read-only |
GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_SwapTelToIpPhoneNumbers Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileEnableAGC | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.34 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_EnableAGC Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| telProfileECNlpMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.35 | integer | read-only |
Access: Instant. AC INI-Param: TelProfile_ECNlpMode Enumeration: 'disabledNLP': 1, 'silenceOutputNLP': 2, 'notConfigured': -1, 'adaptiveNLP': 0. |
| voiceMail | 1.3.6.1.4.1.5003.9.10.3.1.1.16 | |||
| voiceMailLineTransferMode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.1 | integer | read-write |
LineTransferMode: 0-ip 1-pbx blind transfer 2-pbx semi supv transfer 3-supervised transfer (also known as warm transfer). (in TP, feature key and parameter EnableIPMDetectors needed). Access: Instant. AC INI-Param: LineTransferMode Enumeration: 'pbxsupervisedtransfer': 3, 'ip': 0, 'pbxblindtransfer': 1, 'pbxsemisupervised': 2. |
| voiceMailInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.16.2 | integer | read-write |
Selects the method of communication between PBX and the Gateway, that is used instead of legacy voicemail. Access: Instant. AC INI-Param: VoiceMailInterface Enumeration: 'qsig': 3, 'isdnsetup': 4, 'none': 0, 'dtmf': 1, 'smdi': 2. |
| vmDigitPattern | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20 | |||
| vmDigitPatternNoReason | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.1 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReason |
| vmDigitPatternOnBusy | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.2 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusy |
| vmDigitPatternOnNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.3 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswer |
| vmDigitPatternOnDND | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.4 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDND |
| vmDigitPatternInternalCall | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.5 | snmpadminstring | read-write |
Digit pattern used to indicate internal call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternInternalCall |
| vmDigitPatternExternalCall | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.6 | snmpadminstring | read-write |
Digit pattern used to indicate external call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternExternalCall |
| vmDigitPatternDisconnectCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.7 | snmpadminstring | read-write |
Disconnect call if digit string is received from the TEL side during session. Access: Instant. AC INI-Param: TelDisconnectCode |
| vmDigitPatternConnectCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.8 | snmpadminstring | read-write |
Play Code string to Tel side when connect message recieved from IP side. Access: Instant. AC INI-Param: TELCONNECTCODE |
| vmDigitPatternVmDigitPatternOnBusyExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.9 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusyExt |
| vmDigitPatternVmDigitPatternOnNoAnswerExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.10 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswerExt |
| vmDigitPatternVmDigitPatternOnDNDExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.11 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDNDExt |
| vmDigitPatternVmDigitPatternNoReasonExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.12 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReasonExt |
| vmDigitPatternDigitToIgnore | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.13 | snmpadminstring | read-write |
A digit (0-9,A-D,* or #) that if received as Src (S) or Redirect (R), the digit is ignored and not added to that number. Used in DTMF VoiceMail. Access: Instant. AC INI-Param: DigitPatternDigitToIgnore |
| vmMWI | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21 | |||
| vmMWIOnCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.1 | snmpadminstring | read-write |
Digit pattern used to notify PBX about messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOnCode |
| vmMWIOffCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.2 | snmpadminstring | read-write |
Digit pattern used to notify PBX about no messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOffCode |
| vmMWISuffixCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.3 | snmpadminstring | read-write |
MWI suffix code used to notify PBX about messages waiting for extension (added as suffix to the extention number). Access: Instant. AC INI-Param: MWISuffixCode |
| vmMWISourceNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.4 | snmpadminstring | read-write |
The phone number sent as source number toward PSTN for MWI setup. Access: Instant. AC INI-Param: MWISOURCENUMBER |
| vmSMDI | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22 | |||
| vmSMDIEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.1 | integer | read-write |
Enables the Simplified Message Desk Interface (SMDI). SMDI defines a method whereby telephony systems can provide voice-messaging systems with data required by those telephony systems to process incoming calls intelligently. Whenever the phone system routes a call, it sends an SMDI message through an EIA/TIA-232 connection to the voice-messaging system that tells it the line that it is using, the type of call that it is forwarding, and information about the source and destination of the call. 0 = Normal Serial 1 = Serial SMDI. Access: Offline. AC INI-Param: SMDI Enumeration: 'enable': 1, 'disable': 0. |
| vmSMDITimeOut | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.2 | unsigned32 | read-write |
Time out |
| digitalGWext | 1.3.6.1.4.1.5003.9.10.3.1.1.17 | |||
| digitalGWextEnableQSIGTunneling | 1.3.6.1.4.1.5003.9.10.3.1.1.17.1 | integer | read-write |
Enables QSIG Tunneling over SIP. Access: Instant. AC INI-Param: ENABLEQSIGTUNNELING Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWextRemoveCLIWhenRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.17.2 | integer | read-write |
Removes CLI from IP->TEL calls if received CLI is restricted. Access: Instant. AC INI-Param: REMOVECLIWHENRESTRICTED Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWextDefaultCauseMapISDN2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.17.3 | unsigned32 | read-write |
All ISDN release causes except normal, busy, no user responding, and no answer will be mapped to this cause, if set. Access: Instant. AC INI-Param: DEFAULTCAUSEMAPISDN2IP |
| digitalGWextISDNSubaddressFormat | 1.3.6.1.4.1.5003.9.10.3.1.1.17.4 | integer | read-write |
ISDN SubAdress format. Access: Instant. AC INI-Param: ISDNSUBADDRESSFORMAT Enumeration: 'bcd': 1, 'userSpecified': 2, 'ascii': 0. |
| digitalGWextEnableAoC | 1.3.6.1.4.1.5003.9.10.3.1.1.17.5 | integer | read-write |
Enable AoC-D and AoC-E from ISDN to SIP. Access: Instant. AC INI-Param: ENABLEAOC Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWextRemoveCallingName | 1.3.6.1.4.1.5003.9.10.3.1.1.17.6 | integer | read-write |
If set to 1 - Removes Calling Name from IP->TEL calls. Access: Instant. AC INI-Param: REMOVECALLINGNAME Enumeration: 'enable': 1, 'disable': 0. |
| digitalGWextCopyDest2RedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.17.7 | integer | read-write |
0 - Redirect N not affected,1- Called N after manipulation from TEL2IP call will also be used as Redirect N,2 - the Called N before manipulation - as Redirect N. Access: Instant. AC INI-Param: COPYDEST2REDIRECTNUMBER Enumeration: 'beforeManipulation': 2, 'disable': 0, 'afterManipulation': 1. |
| digitalGWextTDMOverIPMinCallsForTrunkActivation | 1.3.6.1.4.1.5003.9.10.3.1.1.17.8 | unsigned32 | read-write |
Minimum connected calls for trunk activation while in TDMOverIPMode if 0 - trunk is always active. Access: Instant. AC INI-Param: TDMOVERIPMINCALLSFORTRUNKACTIVATION |
| rtpOnlyModeForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1 | no-access | |||
| rtpOnlyModeForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.1 | unsigned32 | no-access |
Trunk number. AC INI-Param: N/A |
| rtpOnlyModeForTrunkRtpOnlyModeForTrunk | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.2 | integer | read-write |
immediately. -1 - takes the RTPONLYMODE global value per gatewa 0 - regular call establishment. 1 - The RTP channel open for Rx & Tx. 2-The RTP channel open only for Tx 3 -The RTP channel open only fo Rx. Access: Instant. AC INI-Param: RTPONLYMODEFORTRUNK Enumeration: 'transmitReceive': 1, 'transmitOnly': 2, 'disable': 0, 'receiveOnly': 3, 'notConfigured': -1. |
| acBChannelNegotiationForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22 | no-access |
B-Channel Negotiation for Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1 | no-access | |||
| acBChannelNegotiationForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.1 | unsigned32 | no-access |
Trunk number starting at 0. AC INI-Param: N/A |
| acBChannelNegotiationForTrunkMode | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.2 | integer | read-write |
ISDN B-Channel negotiation mode for trunk put MODE_NOT_SET (-1) to use BCHANNELNEGOTIATION per Gateway. Access: Instant. AC INI-Param: BCHANNELNEGOTIATIONFORTRUNK Enumeration: 'exclusive': 1, 'preferred': 0, 'notConfigured': -1, 'any': 2. |
| acDigitalOOSBehaviorForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23 | no-access |
Digital OOS Behavior for Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1 | no-access | |||
| acDigitalOOSBehaviorForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.1 | unsigned32 | no-access |
Trunk number starting at 0. AC INI-Param: N/A |
| acDigitalOOSBehaviorForTrunkValue | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.2 | integer | read-write |
Digital OOS Behavior for trunk put OOS_NOT_SET (-1) to use DIGITALOOSBEHAVIOR per Gateway. Access: Instant. AC INI-Param: DIGITALOOSBEHAVIORFORTRUNK Enumeration: 'notConfigured': -1, 'service': 1, 'default': 0, 'alarm': 3, 'dChannel': 2, 'block': 4. |
| acRemoveCallingNameForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24 | no-access |
Remove Calling Name For Trunk table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1 | no-access | |||
| acRemoveCallingNameForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.1 | unsigned32 | no-access |
Trunk number starting at 0. AC INI-Param: N/A |
| acRemoveCallingNameForTrunkMode | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.2 | integer | read-write |
Remove Calling Name For Trunk table .Set (-1) to use the global parameter digitalGWextRemoveCallingName. Access: Instant. AC INI-Param: RemoveCallingNameForTrunk Enumeration: 'enable': 1, 'disable': 0, 'notConfigured': -1. |
| gwSecurity | 1.3.6.1.4.1.5003.9.10.3.1.1.18 | |||
| gwSecurityMediaSecurityBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.18.1 | integer | read-write |
Gateway behavior when recieving offer/response for media encryption. Access: Instant. AC INI-Param: MEDIASECURITYBEHAVIOUR Enumeration: 'preferable': 0, 'mandatory': 1. |
| gwSecuritySIPSRequireClientCertificate | 1.3.6.1.4.1.5003.9.10.3.1.1.18.2 | integer | read-write |
Should require client certificate upon TLS connection request arrival. Access: Offline. AC INI-Param: SIPSREQUIRECLIENTCERTIFICATE Enumeration: 'enable': 1, 'disable': 0. |
| gwSecurityTLSReHandshakeInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.18.3 | unsigned32 | read-write |
The interval between consequent TLS re-handshakes (Minutes). 0 - Disables re-handshakes. Access: Instant. AC INI-Param: TLSREHANDSHAKEINTERVAL |
| gwSecurityPeerHostNameVerificationMode | 1.3.6.1.4.1.5003.9.10.3.1.1.18.4 | integer | read-write |
While using TLS, defines the verification behavior of the host name sent in the certificate. Access: Instant. AC INI-Param: PEERHOSTNAMEVERIFICATIONMODE Enumeration: 'disable': 0, 'serverOnly': 1, 'serverAndClient': 2. |
| gwSecurityVerifyServerCertificate | 1.3.6.1.4.1.5003.9.10.3.1.1.18.5 | integer | read-write |
Certificate validation behavior 0 - No certificate validation. 1 - Server certificate validation. Access: Instant. AC INI-Param: VERIFYSERVERCERTIFICATE Enumeration: 'enable': 1, 'disable': 0. |
| gwSecurityTLSRemoteSubjectName | 1.3.6.1.4.1.5003.9.10.3.1.1.18.6 | snmpadminstring | read-write |
used to verify the remote peer Common Name (at certificate) when using TLS. Access: Instant. AC INI-Param: TLSREMOTESUBJECTNAME |
| gwSecuritySRTPofferedSuites | 1.3.6.1.4.1.5003.9.10.3.1.1.18.7 | integer | read-write |
Offered SRTP Cipher Suites. Access: Instant. AC INI-Param: SRTPOFFEREDSUITES Enumeration: 'aesCm128HmacShaOne32': 2, 'all': 0, 'aesCm128HmacShaOne80': 1. |
| acGWRtcpXr | 1.3.6.1.4.1.5003.9.10.3.1.1.19 | |||
| acGWRtcpXrEscIP | 1.3.6.1.4.1.5003.9.10.3.1.1.19.1 | snmpadminstring | read-write |
RTCP-XR server IP address. Access: Instant. AC INI-Param: RtcpXrEscIP |
| acGWRtcpXrReportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.19.2 | integer | read-write |
0:rtcpxr is not sent over SIP at all 1:rtcpxr is sent over sip when call ended 2:rtcpxr is sent over sip when on periodic interval and when call ended . Access: Instant. AC INI-Param: RtcpXrReportMode Enumeration: 'disable': 0, 'endCall': 1, 'endCallPeriodic': 2. |
| acGWRtcpXrEscTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.19.3 | integer | read-write |
RtcpXrEsc transport type. Access: Instant. AC INI-Param: RTCPXRESCTRANSPORTTYPE Enumeration: 'tLS': 2, 'uDP': 0, 'tCP': 1, 'notConfigured': -1. |
| acTimers | 1.3.6.1.4.1.5003.9.10.3.1.1.20 | |||
| acTimersIPAlertTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.20.1 | unsigned32 | read-write |
Maximal time to wait for connect from IP (seconds). Access: Instant. AC INI-Param: IPALERTTIMEOUT |
| acTimersPSTNAlertTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.20.2 | unsigned32 | read-write |
Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: PSTNALERTTIMEOUT |
| acEmergency | 1.3.6.1.4.1.5003.9.10.3.1.1.21 | |||
| acEmergencyRegretTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.21.1 | unsigned32 | read-write |
[min] Regret time for call that is marked as Emergency. Access: Instant. AC INI-Param: EmergencyRegretTimeout |
| acEmergencyNumbersTable | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21 | no-access |
Emergency numbers table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1 | no-access | |||
| acEmergencyNumbersIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.1 | unsigned32 | no-access |
Emergency numbers, starting at 0. AC INI-Param: N/A |
| acEmergencyNumbersNumbers | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.2 | snmpadminstring | read-write |
Emergency numbers. Access: Instant. AC INI-Param: EmergencyNumbers |
| accounts | 1.3.6.1.4.1.5003.9.10.3.1.1.22 | |||
| accountTable | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21 | no-access |
GwApp Accounts table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1 | no-access |
table |
||
| accountIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.1 | unsigned32 | read-only |
. AC INI-Param: Account_Index |
| accountRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| accountAction | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| accountActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| accountServedTrunkGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.5 | integer32 | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedTrunkGroup |
| accountServedIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.6 | integer32 | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedIPGroup |
| accountServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.7 | integer32 | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServingIPGroup |
| accountUsername | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.8 | snmpadminstring | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Username |
| accountPassword | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.9 | snmpadminstring | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Password |
| accountHostName | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.10 | snmpadminstring | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_HostName |
| accountRegister | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.11 | integer | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Register Enumeration: 'yes': 1, 'no': 0. |
| accountContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.12 | snmpadminstring | read-only |
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ContactUser |
| ipGroups | 1.3.6.1.4.1.5003.9.10.3.1.1.23 | |||
| ipGroupTable | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21 | no-access |
GwApp IP Group Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1 | no-access |
table |
||
| ipGroupIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.1 | unsigned32 | read-only |
. AC INI-Param: IPGroup_Index |
| ipGroupRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| ipGroupAction | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| ipGroupActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| ipGroupType | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.5 | integer | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Type Enumeration: 'user': 1, 'server': 0. |
| ipGroupDescription | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.6 | snmpadminstring | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Description |
| ipGroupProxySetId | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.7 | integer32 | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ProxySetId |
| ipGroupSIPGroupName | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.8 | snmpadminstring | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SIPGroupName |
| ipGroupContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.9 | snmpadminstring | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ContactUser |
| ipGroupEnableSurvivability | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.10 | integer | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_EnableSurvivability Enumeration: 'enableIfNecessary': 1, 'disable': 0, 'alwaysEnable': 2. |
| ipGroupServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.11 | integer32 | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ServingIPGroup |
| ipGroupSipReRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.12 | integer | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SipReRoutingMode Enumeration: 'routingTable': 2, 'proxy': 1, 'notConfigured': -1, 'standard': 0. |
| ipGroupAlwaysUseRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.13 | integer | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_AlwaysUseRouteTable Enumeration: 'yes': 1, 'no': 0. |
| ipGroupRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.14 | integer | read-only |
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_RoutingMode Enumeration: 'useRoutingTable': 0, 'sendToServingIPGroup': 1, 'routeToRequestURI': 2, 'notConfigured': -1. |
| ipGroupProfileId | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.15 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPGroup_ProfileId |
| ipGroupMediaRealm | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.16 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPGroup_MediaRealm |
| ipGroupMaxNumOfRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.17 | integer32 | read-only |
Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: IPGroup_MaxNumOfRegUsers |
| sbc | 1.3.6.1.4.1.5003.9.10.3.1.1.24 | |||
| sbcEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.1 | integer | read-write |
Enables SBC functionality. Access: Instant. AC INI-Param: ENABLESBC Enumeration: 'enable': 1, 'disable': 0. |
| sbcRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.24.2 | unsigned32 | read-write |
Expires value SBC responds to user with. Used when server is offline or when the user is behind NAT. Otherwise expires is defined by the server. Access: Instant. AC INI-Param: SBCREGISTRATIONTIME |
| sbcEnableISBCApplication | 1.3.6.1.4.1.5003.9.10.3.1.1.24.3 | integer | read-write |
Enables SBC functionality. Access: Offline. AC INI-Param: ENABLESBCAPPLICATION Enumeration: 'enable': 1, 'disable': 0. |
| sbcEnableIIP2IPApplication | 1.3.6.1.4.1.5003.9.10.3.1.1.24.4 | integer | read-write |
Enables IP2IP functionality. Access: Offline. AC INI-Param: ENABLEIP2IPAPPLICATION Enumeration: 'enable': 1, 'disable': 0. |
| sbcClassificationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21 | no-access |
GwApp Classification Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1 | no-access | |||
| sbcClassificationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.1 | unsigned32 | read-only |
. AC INI-Param: Classification_Index |
| sbcClassificationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcClassificationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcClassificationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcClassificationSrcIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.5 | integer32 | read-only |
Source IP group ID. Access: Instant. AC INI-Param: Classification_SrcIPGroupID |
| sbcClassificationSrcSRDId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.6 | integer32 | read-only |
Source SRD ID. Access: Instant. AC INI-Param: Classification_SrcSRDID |
| sbcClassificationSrcAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.7 | snmpadminstring | read-only |
Source address. Access: Instant. AC INI-Param: Classification_SrcAddress |
| sbcClassificationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.8 | snmpadminstring | read-only |
Source username prefix. Access: Instant. AC INI-Param: Classification_SrcUsernamePrefix |
| sbcClassificationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.9 | snmpadminstring | read-only |
Source host. Access: Instant. AC INI-Param: Classification_SrcHost |
| sbcClassificationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.10 | snmpadminstring | read-only |
Destination username prefix. Access: Instant. AC INI-Param: Classification_DestUsernamePrefix |
| sbcClassificationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.11 | snmpadminstring | read-only |
Destination host. Access: Instant. AC INI-Param: Classification_DestHost |
| sbcRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22 | no-access |
GwApp SBC Routing Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1 | no-access | |||
| sbcRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.1 | unsigned32 | read-only |
. AC INI-Param: IP2IPRouting_Index |
| sbcRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcRoutingSrcIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.5 | integer32 | read-only |
Source IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_SrcIPGroupID |
| sbcRoutingSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.6 | snmpadminstring | read-only |
Source username prefix. Access: Instant. AC INI-Param: IP2IPRouting_SrcUsernamePrefix |
| sbcRoutingSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.7 | snmpadminstring | read-only |
Source host. Access: Instant. AC INI-Param: IP2IPRouting_SrcHost |
| sbcRoutingDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.8 | snmpadminstring | read-only |
Destination username prefix. Access: Instant. AC INI-Param: IP2IPRouting_DestUsernamePrefix |
| sbcRoutingDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.9 | snmpadminstring | read-only |
Destination host. Access: Instant. AC INI-Param: IP2IPRouting_DestHost |
| sbcRoutingDestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.10 | integer | read-only |
Destination type. Access: Instant. AC INI-Param: IP2IPRouting_DestType Enumeration: 'dest': 1, 'requestURI': 2, 'enumTranslate': 3, 'ipGroup': 0. |
| sbcRoutingDestIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.11 | integer32 | read-only |
Destination IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_DestIPGroupID |
| sbcRoutingDestSRDId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.12 | integer32 | read-only |
Destination SRD ID. Access: Instant. AC INI-Param: IP2IPRouting_DestSRDID |
| sbcRoutingDestAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.13 | snmpadminstring | read-only |
Destination Address. Access: Instant. AC INI-Param: IP2IPRouting_DestAddress |
| sbcRoutingDestPort | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.14 | unsigned32 | read-only |
Destination Port number. Access: Instant. AC INI-Param: IP2IPRouting_DestPort |
| sbcRoutingDestTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.15 | integer | read-only |
Destination transport type. Access: Instant. AC INI-Param: IP2IPRouting_DestTransportType Enumeration: 'tls': 2, 'udp': 0, 'tcp': 1, 'notConfigured': -1. |
| sbcRoutingAltRouteOptions | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.16 | integer | read-only |
Alternative Route Options. Access: Instant. AC INI-Param: IP2IPRouting_AltRouteOptions Enumeration: 'considerInputs': 2, 'routeRow': 0, 'ignoreInputs': 1. |
| sbcRoutingRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.17 | integer | read-only |
Request Type. Access: Instant. AC INI-Param: IP2IPRouting_RequestType Enumeration: 'inviteAndSubscribe': 5, 'all': 0, 'invite': 1, 'inviteAndRegister': 4, 'register': 2, 'subscribe': 3. |
| sbcIP2IPInboundManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23 | no-access |
GwApp IP Inbound Manipulation Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1 | no-access | |||
| sbcIP2IPInboundManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.1 | unsigned32 | read-only |
. AC INI-Param: IPInboundManipulation_Index |
| sbcIP2IPInboundManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcIP2IPInboundManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcIP2IPInboundManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcIP2IPInboundManipulationIsAdditionalManipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.5 | integer | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_IsAdditionalManipulation Enumeration: 'yes': 1, 'no': 0. |
| sbcIP2IPInboundManipulationManipulatedURI | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.6 | integer | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_ManipulatedURI Enumeration: 'yes': 1, 'no': 0. |
| sbcIP2IPInboundManipulationSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.7 | integer32 | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_SrcIPGroupID |
| sbcIP2IPInboundManipulationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.8 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_SrcUsernamePrefix |
| sbcIP2IPInboundManipulationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.9 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_SrcHost |
| sbcIP2IPInboundManipulationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.10 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_DestUsernamePrefix |
| sbcIP2IPInboundManipulationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_DestHost |
| sbcIP2IPInboundManipulationRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.12 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromLeft |
| sbcIP2IPInboundManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.13 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromRight |
| sbcIP2IPInboundManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.14 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_LeaveFromRight |
| sbcIP2IPInboundManipulationPrefix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.15 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_Prefix2Add |
| sbcIP2IPInboundManipulationSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.16 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_Suffix2Add |
| sbcIP2IPInboundManipulationRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.17 | integer | read-only |
Access: Instant. AC INI-Param: IPInboundManipulation_RequestType Enumeration: 'inviteAndSubscribe': 5, 'all': 0, 'invite': 1, 'inviteAndRegister': 4, 'register': 2, 'subscribe': 3. |
| sbcIP2IPOutboundManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24 | no-access |
GwApp IP Outbound Manipulation Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1 | no-access | |||
| sbcIP2IPOutboundManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.1 | unsigned32 | read-only |
. AC INI-Param: IPOutboundManipulation_Index |
| sbcIP2IPOutboundManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcIP2IPOutboundManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcIP2IPOutboundManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcIP2IPOutboundManipulationIsAdditionalManipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.5 | integer | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_IsAdditionalManipulation Enumeration: 'yes': 1, 'no': 0. |
| sbcIP2IPOutboundManipulationManipulatedURI | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.6 | integer | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_ManipulatedURI Enumeration: 'yes': 1, 'no': 0. |
| sbcIP2IPOutboundManipulationSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.7 | integer32 | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcIPGroupID |
| sbcIP2IPOutboundManipulationDestIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.8 | integer32 | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_DestIPGroupID |
| sbcIP2IPOutboundManipulationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.9 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcUsernamePrefix |
| sbcIP2IPOutboundManipulationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.10 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcHost |
| sbcIP2IPOutboundManipulationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.11 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_DestUsernamePrefix |
| sbcIP2IPOutboundManipulationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.12 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_DestHost |
| sbcIP2IPOutboundManipulationRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.13 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromLeft |
| sbcIP2IPOutboundManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.14 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromRight |
| sbcIP2IPOutboundManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.15 | unsigned32 | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_LeaveFromRight |
| sbcIP2IPOutboundManipulationPrefix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.16 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_Prefix2Add |
| sbcIP2IPOutboundManipulationSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.17 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_Suffix2Add |
| sbcIP2IPOutboundManipulationRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.18 | integer | read-only |
Access: Instant. AC INI-Param: IPOutboundManipulation_RequestType Enumeration: 'inviteAndSubscribe': 5, 'all': 0, 'invite': 1, 'inviteAndRegister': 4, 'register': 2, 'subscribe': 3. |
| sbcAdmissionControlTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25 | no-access |
GwApp SBC SIP Admission Control Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1 | no-access | |||
| sbcAdmissionControlIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.1 | unsigned32 | read-only |
. AC INI-Param: SBCAdmissionControl_Index |
| sbcAdmissionControlRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcAdmissionControlAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcAdmissionControlActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcAdmissionControlLimitType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.5 | integer | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_LimitType Enumeration: 'sRD': 1, 'ipGroup': 0. |
| sbcAdmissionControlIpGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.6 | integer32 | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_IPGroupID |
| sbcAdmissionControlSrdID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.7 | integer32 | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_SRDID |
| sbcAdmissionControlRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.8 | integer | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_RequestType Enumeration: 'subscribe': 2, 'all': 0, 'other': 3, 'invite': 1. |
| sbcAdmissionControlRequestDirection | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.9 | integer | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_RequestDirection Enumeration: 'both': 0, 'out': 2, 'in': 1. |
| sbcAdmissionControlLimit | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.10 | integer32 | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_Limit |
| sbcAdmissionControlLimitPerUser | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.11 | integer32 | read-only |
Access: Instant. AC INI-Param: SBCAdmissionControl_LimitPerUser |
| sbcMessageManipulationsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26 | no-access |
SBC Message Manipulations Table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1 | no-access | |||
| sbcMessageManipulationsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.1 | unsigned32 | read-only |
. AC INI-Param: MessageManipulations_Index |
| sbcMessageManipulationsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcMessageManipulationsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcMessageManipulationsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcMessageManipulationsManipulationSetID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.5 | unsigned32 | read-only |
Manipulation Set ID. Access: Instant. AC INI-Param: MessageManipulations_ManSetID |
| sbcMessageManipulationsMessageType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.6 | snmpadminstring | read-only |
Message type. Access: Instant. AC INI-Param: MessageManipulations_MessageType |
| sbcMessageManipulationsCondition | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.7 | snmpadminstring | read-only |
Message manipulation Condition. Access: Instant. AC INI-Param: MessageManipulations_Condition |
| sbcMessageManipulationsActionSubject | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.8 | snmpadminstring | read-only |
Message manipulation Action Subject. Access: Instant. AC INI-Param: MessageManipulations_ActionSubject |
| sbcMessageManipulationsActionType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.9 | integer | read-only |
Message manipulation Action type. Access: Instant. AC INI-Param: MessageManipulations_ActionType Enumeration: 'addPrefix': 3, 'removeSuffix': 5, 'modify': 2, 'remove': 1, 'removePrefix': 6, 'add': 0, 'addSuffix': 4. |
| sbcMessageManipulationsActionValue | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.10 | snmpadminstring | read-only |
Message manipulation Action value. Access: Instant. AC INI-Param: MessageManipulations_ActionValue |
| sbcMessageManipulationsRowRole | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.11 | integer | read-only |
Message manipulation row rule. Access: Instant. AC INI-Param: MessageManipulations_RowRole Enumeration: 'actionOnly': 1, 'matchAndAction': 0. |
| sbcAlternativeRoutingReasonsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27 | no-access |
GwApp Reasons For Alternative Routing For SBC Application(IP to IP) Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1 | no-access | |||
| sbcAlternativeRoutingReasonsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.1 | unsigned32 | read-only |
. AC INI-Param: SBCAlternativeRoutingReasons_Index |
| sbcAlternativeRoutingReasonsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sbcAlternativeRoutingReasonsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcAlternativeRoutingReasonsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sbcAlternativeRoutingReasonsReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.5 | unsigned32 | read-only |
Release Cause. Access: Instant. AC INI-Param: SBCAlternativeRoutingReasons_ReleaseCause |
| gwIPv6 | 1.3.6.1.4.1.5003.9.10.3.1.1.25 | |||
| gwIPv6GwAppDualIPStackSDPMethod | 1.3.6.1.4.1.5003.9.10.3.1.1.25.1 | integer | read-write |
0. Always offer a single (preferrable) media IP address. 1. ANAT - Construct offer using ANAT semantics (RFC 4091 & RFC 4092) . Access: Instant. AC INI-Param: DUALIPSTACKSDPMETHOD Enumeration: 'nONE': 0, 'aNAT': 1. |
| gwIPv6GwAppPrimaryMediaInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.25.2 | integer32 | read-write |
Primary media interface to be used within SDP. Access: Instant. AC INI-Param: PRIMARYMEDIAINTERFACE |
| gwIPv6GwAppSecondaryMediaInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.25.3 | integer32 | read-write |
Secondary media interface to be used within SDP. Access: Instant. AC INI-Param: SECONDARYMEDIAINTERFACE |
| gwIPv6MediaIPVersionPreference | 1.3.6.1.4.1.5003.9.10.3.1.1.25.4 | integer | read-write |
Select the preferred Media IP version. Access: Instant. AC INI-Param: MEDIAIPVERSIONPREFERENCE Enumeration: 'onlyIPv6': 1, 'onlyIPv4': 0, 'preferIPv4': 2, 'preferIPv6': 3. |
| srdSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.26 | |||
| srdTable | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21 | no-access |
GwApp Signaling Routing Domain (SRD) Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1 | no-access | |||
| srdIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.1 | unsigned32 | read-only |
. AC INI-Param: SRD_Index |
| srdRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| srdAction | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srdActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| srdName | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.5 | snmpadminstring | read-only |
GwApp Signaling Routing Domain name. Access: Instant. AC INI-Param: SRD_Name |
| srdMediaRealm | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.6 | snmpadminstring | read-only |
GwApp Signaling Routing Domain media realm. Access: Instant. AC INI-Param: SRD_MediaRealm |
| srdIntraSRDMediaAnchoring | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.7 | integer | read-only |
Internal SRD Media Anchoring. Access: Offline. AC INI-Param: SRD_IntraSRDMediaAnchoring Enumeration: 'dontAnchorMedia': 1, 'anchorMedia': 0. |
| srdBlockUnRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.8 | integer | read-only |
Block Calls From Unregistered User. Access: Offline. AC INI-Param: SRD_BlockUnRegUsers Enumeration: 'yes': 1, 'no': 0. |
| srdMaxNumOfRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.9 | integer32 | read-only |
Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: SRD_MaxNumOfRegUsers |
| sipInterfaceSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.27 | |||
| sipInterfaceTable | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21 | no-access |
GwApp SIP Interface Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1 | no-access | |||
| sipInterfaceIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.1 | unsigned32 | read-only |
. AC INI-Param: SIPInterface_Index |
| sipInterfaceRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sipInterfaceAction | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipInterfaceActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipInterfaceNetworkInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.5 | snmpadminstring | read-only |
Network Interface. Access: Instant. AC INI-Param: SIPInterface_NetworkInterface |
| sipInterfaceApplicationType | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.6 | integer | read-only |
Application Type. Access: Instant. AC INI-Param: SIPInterface_ApplicationType Enumeration: 'sas': 1, 'sbc': 2, 'gwIP2IP': 0. |
| sipInterfaceUDPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.7 | unsigned32 | read-only |
UDP Port number. Access: Instant. AC INI-Param: SIPInterface_UDPPort |
| sipInterfaceTCPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.8 | unsigned32 | read-only |
TCP Port number. Access: Instant. AC INI-Param: SIPInterface_TCPPort |
| sipInterfaceTLSPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.9 | unsigned32 | read-only |
TLS Port number. Access: Instant. AC INI-Param: SIPInterface_TLSPort |
| sipInterfaceSRD | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.10 | unsigned32 | read-only |
Access: Instant. AC INI-Param: SIPInterface_SRD |
| sip | 1.3.6.1.4.1.5003.9.10.3.1.2 | |||
| sipProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1 | |||
| sipProxyUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.1.1 | integer | read-write |
Is SIP Proxy used. Access: Instant. AC INI-Param: ISPROXYUSED Enumeration: 'yes': 1, 'no': 0. |
| sipProxyEnableKeepAlive | 1.3.6.1.4.1.5003.9.10.3.1.2.1.2 | integer | read-write |
Enable Proxy Keep-Alive over OPTIONS method or REGISTER method. Access: Instant. AC INI-Param: ENABLEPROXYKEEPALIVE Enumeration: 'usingOptions': 1, 'disable': 0, 'usingRegister': 2. |
| sipProxyName | 1.3.6.1.4.1.5003.9.10.3.1.2.1.3 | snmpadminstring | read-write |
SIP Proxy name. Access: Instant. AC INI-Param: PROXYNAME |
| sipProxyIsHotSwap | 1.3.6.1.4.1.5003.9.10.3.1.2.1.4 | integer | read-write |
Enable Proxy Hot-Swap mode. Access: Instant. AC INI-Param: ISPROXYHOTSWAP Enumeration: 'yes': 1, 'no': 0. |
| sipProxyHotSwapRtx | 1.3.6.1.4.1.5003.9.10.3.1.2.1.5 | unsigned32 | read-write |
Number of Rtx before Hotswap is performed. Access: Instant. AC INI-Param: PROXYHOTSWAPRTX |
| sipProxyRedundancyMode | 1.3.6.1.4.1.5003.9.10.3.1.2.1.6 | integer | read-write |
Redundancy Mode - Parking on active proxy or switching to main Proxy whenever online. Access: Instant. AC INI-Param: PROXYREDUNDANCYMODE Enumeration: 'homing': 1, 'parking': 0. |
| sipProxyAlwaysUseRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.7 | integer | read-write |
Always use routing table even though proxy is available. Access: Instant. AC INI-Param: ALWAYSUSEROUTETABLE Enumeration: 'yes': 1, 'no': 0. |
| sipProxyAlwaysSendToProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.8 | integer | read-write |
Send all messages to Proxy server. Access: Instant. AC INI-Param: ALWAYSSENDTOPROXY Enumeration: 'yes': 1, 'no': 0. |
| sipProxyKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.9 | unsigned32 | read-write |
Time interval between Proxy Keep-Alive messages (seconds). Access: Instant. AC INI-Param: ProxyKeepAliveTime |
| sipProxyIsFallbackUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.1.10 | integer | read-write |
Allow fallback to internal Tel to IP routing table if Proxy is not responding. Access: Instant. AC INI-Param: IsFallbackUsed Enumeration: 'yes': 1, 'no': 0. |
| sipProxySendInviteToProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.11 | integer | read-write |
Always send INVITE messages to Proxy server. Access: Instant. AC INI-Param: SENDINVITETOPROXY Enumeration: 'enable': 1, 'disable': 0. |
| sipProxyIsTrustedProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.12 | integer | read-write |
Determine whether the proxy is a trusted node. Access: Instant. AC INI-Param: ISTRUSTEDPROXY Enumeration: 'enable': 1, 'disable': 0. |
| sipProxyUseGatewayNameForOptions | 1.3.6.1.4.1.5003.9.10.3.1.2.1.13 | integer | read-write |
Use Gateway name (instead of IP address) in Keep-Alive OPTIONS messages. Access: Instant. AC INI-Param: USEGATEWAYNAMEFOROPTIONS Enumeration: 'enable': 1, 'disable': 0. |
| sipProxyEnableSRVQuery | 1.3.6.1.4.1.5003.9.10.3.1.2.1.14 | integer | read-write |
Enable DNS SRV queries for Proxy domain name. Access: Instant. AC INI-Param: ENABLEPROXYSRVQUERY Enumeration: 'enable': 1, 'disable': 0. |
| sipProxyDNSQueryType | 1.3.6.1.4.1.5003.9.10.3.1.2.1.15 | integer | read-write |
DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE Enumeration: 'aRecord': 0, 'nAPTR': 2, 'sRV': 1. |
| sipProxyLoadBalancingMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.1.16 | integer | read-write |
Method of the proxies load balancing: 0 - Disabled (default) 1 - RoundRobin 2 - Random SRV Weights. Access: Instant. AC INI-Param: PROXYLOADBALANCINGMETHOD Enumeration: 'roundRobin': 1, 'disable': 0, 'randomWeights': 2. |
| sipProxyIPListRefreshTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.17 | unsigned32 | read-write |
Time interval between refresh of proxies list (seconds). For example SRV query will be done every ProxyIPListRefreshTime seconds. Access: Instant. AC INI-Param: PROXYIPLISTREFRESHTIME |
| proxyIPTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21 | no-access |
The table defines phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1 | no-access | |||
| proxyIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: ProxyIp_Index |
| proxyIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| proxyIPAction | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| proxyIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| proxyIPProxyIP | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.5 | snmpadminstring | read-only |
Access: Instant. AC INI-Param: ProxyIp_IpAddress |
| sipProxySetTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22 | no-access |
GwApp Proxy Set Table |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1 | no-access | |||
| sipProxySetIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.1 | unsigned32 | no-access |
AC INI-Param: ProxySet_Index |
| sipProxySetRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| sipProxySetAction | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipProxySetActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipProxySetEnableProxyKeepAlive | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.5 | integer | read-only |
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_EnableProxyKeepAlive Enumeration: 'usingOptions': 1, 'disable': 0, 'usingRegister': 2. |
| sipProxySetProxyKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.6 | unsigned32 | read-only |
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyKeepAliveTime |
| sipProxySetProxyLoadBalancingMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.7 | integer | read-only |
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyLoadBalancingMethod Enumeration: 'roundRobin': 1, 'disable': 0, 'randomWeights': 2. |
| sipProxySetIsProxyHotSwap | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.8 | integer | read-only |
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_IsProxyHotSwap Enumeration: 'enable': 1, 'disable': 0. |
| sipDTMF | 1.3.6.1.4.1.5003.9.10.3.1.2.2 | |||
| sipDTMFIsHookFlashUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.2.1 | integer | read-write |
Detect and send Hook-Flash as Out-of-Band message. Access: Instant. AC INI-Param: ISHOOKFLASHUSED Enumeration: 'yes': 1, 'no': 0. |
| sipDTMFIsDTMFUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.2.2 | integer | read-write |
Send DTMFs on the Signaling path (not on the Media path). Access: Instant. AC INI-Param: ISDTMFUSED Enumeration: 'yes': 1, 'no': 0. |
| sipDTMFOutOfBandDtmfFormat | 1.3.6.1.4.1.5003.9.10.3.1.2.2.3 | integer | read-write |
DTMF Out-of-Band transport method. Access: Instant. AC INI-Param: OUTOFBANDDTMFFORMAT Enumeration: 'info-Cisco': 2, 'notify': 3, 'info-Nortel': 1. |
| sipDTMFDisableAutoMute | 1.3.6.1.4.1.5003.9.10.3.1.2.2.4 | integer | read-write |
Disables inband auto mute of DTMFs when signalling is used for sending DTMFs. Access: Instant. AC INI-Param: DISABLEAUTODTMFMUTE Enumeration: 'yes': 1, 'no': 0. |
| sipDTMFRxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.2.2.5 | integer | read-write |
Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: RXDTMFOPTION Enumeration: 'supportRFC2833inSDP': 3, 'noSupportRFC2833inSDP': 0. |
| sipDTMFHookFlashOption | 1.3.6.1.4.1.5003.9.10.3.1.2.2.6 | integer | read-write |
Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION Enumeration: 'iNFO': 1, 'infoLucent': 5, 'notSupported': 0, 'rFC2833': 4. |
| sipDTMFUseDigitForSpecialDTMF | 1.3.6.1.4.1.5003.9.10.3.1.2.2.7 | integer | read-write |
Indicates whether a special DTMF, sent with INFO(Cisco), is sent using its digit representation or not. Access: Instant. AC INI-Param: USEDIGITFORSPECIALDTMF Enumeration: 'numeric': 1, 'special': 0. |
| sipDTMFMinRoutingOverlapDigits | 1.3.6.1.4.1.5003.9.10.3.1.2.2.8 | unsigned32 | read-write |
Minimum number of overlap digits before routing. Access: Instant. AC INI-Param: MINOVERLAPDIGITSFORROUTING |
| sipDTMFISDNOverlapIPtoTelDialing | 1.3.6.1.4.1.5003.9.10.3.1.2.2.9 | integer | read-write |
Enable ISDN Overlap IP to Tel Dialing. Access: Instant. AC INI-Param: ISDNTXOVERLAP Enumeration: 'enable': 1, 'disable': 0. |
| sipTxDTMFOptionTable | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21 | no-access |
The names of the five possible coders. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1 | no-access | |||
| sipTxDTMFOptionIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: TxDtmfOption_Index |
| sipTxDTMFOptionRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| sipTxDTMFOptionAction | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipTxDTMFOptionActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sipTxDTMFOptionValue | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.5 | integer | read-only |
Transmit DTMF option. Access: Instant. AC INI-Param: TxDtmfOption_Type Enumeration: 'ciscoINFO': 3, 'nOTIFY': 2, 'nortelINFO': 1, 'notSupported': 0, 'rFC2833': 4, 'koreaTelecomINFO': 5. |
| sipPorts | 1.3.6.1.4.1.5003.9.10.3.1.2.3 | |||
| sipPortsDestinationPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.1 | unsigned32 | read-write |
Default SIP destination port (usually 5060). Access: Instant. AC INI-Param: SIPDESTINATIONPORT |
| sipPortsLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.2 | unsigned32 | read-write |
Local SIP port used for signaling. Access: Instant. AC INI-Param: LOCALSIPPORT |
| sipPortsTCPLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.3 | unsigned32 | read-write |
Local SIP port used for signaling. Access: Instant. AC INI-Param: TCPLOCALSIPPORT |
| sipPortsTLSLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.4 | unsigned32 | read-write |
Local TLS SIP port used for signaling. Access: Instant. AC INI-Param: TLSLOCALSIPPORT |
| sipAuth | 1.3.6.1.4.1.5003.9.10.3.1.2.4 | |||
| sipAuthMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.1 | integer | read-write |
Authentication mode. Access: Instant. AC INI-Param: AUTHENTICATIONMODE Enumeration: 'perGW': 1, 'perEP': 0, 'perFXSOnly': 3. |
| sipAuthUserName | 1.3.6.1.4.1.5003.9.10.3.1.2.4.2 | snmpadminstring | read-write |
User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| sipAuthPassword | 1.3.6.1.4.1.5003.9.10.3.1.2.4.3 | snmpadminstring | read-write |
Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| sipAuthCnonce | 1.3.6.1.4.1.5003.9.10.3.1.2.4.4 | snmpadminstring | read-write |
Cnonce parameter used for authentication. Access: Instant. AC INI-Param: CNONCE |
| sipAuthMutualAuthenticationMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.5 | integer | read-write |
Mutual Authentication Mode: 0 - Optional, 1 - Mandatory. Access: Instant. AC INI-Param: MUTUALAUTHENTICATIONMODE Enumeration: 'mandatory': 1, 'optional': 0. |
| sipAuthChallengeCachingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.6 | integer | read-write |
0. No caching mode - don't cache any challenges. Every new request will be sent without preliminary authorization. If the request is challenged - new request with authorization data will be sent. 1. Cache for INVITE mode - challenges issued for INVITE request and within the session will be cached. This will prevent the mixture of REGISTER and INVITE authorizations. 2. Full cache mode - cache any challenges from the proxies. . Access: Instant. AC INI-Param: SIPCHALLENGECACHINGMODE Enumeration: 'fullCaching': 2, 'inviteOnly': 1, 'noCaching': 0. |
| authTable | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1 | no-access | |||
| authIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.1 | unsigned32 | read-only |
Entry number, starting at 0. AC INI-Param: Authentication_Index |
| authIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.2 | integer | read-write |
Is this index used. Access: Offline. AC INI-Param: Authentication_IsUsed Enumeration: 'yes': 1, 'no': 0. |
| authAction | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| authActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| authUserID | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.5 | snmpadminstring | read-write |
Access: Instant. AC INI-Param: Authentication_UserId |
| authUserPassword | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.6 | snmpadminstring | read-write |
Access: Instant. AC INI-Param: Authentication_UserPassword |
| authModule | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.7 | unsigned32 | read-only |
Module. AC INI-Param: Authentication_Module |
| authPort | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.8 | unsigned32 | read-only |
Port. AC INI-Param: Authentication_Port |
| sipRetransmission | 1.3.6.1.4.1.5003.9.10.3.1.2.5 | |||
| sipRetransmissionT1Rtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.1 | unsigned32 | read-write |
SIP T1 timeout for retransmission. Access: Instant. AC INI-Param: SIPT1RTX |
| sipRetransmissionT2Rtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.2 | unsigned32 | read-write |
SIP T2 timeout for retransmission. Access: Instant. AC INI-Param: SIPT2RTX |
| sipRetransmissionSipMaxRtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.3 | unsigned32 | read-write |
Maximum number of retransmissions. Access: Instant. AC INI-Param: SipMaxRtx |
| sipRetransmissionIsRtxEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.5.4 | integer | read-write |
is Rtx timer enabled. Access: Instant. AC INI-Param: ISRTXENABLE Enumeration: 'yes': 1, 'no': 0. |
| sipRetransmissionEnablePTime | 1.3.6.1.4.1.5003.9.10.3.1.2.5.5 | integer | read-write |
is ptime parameter needed in sdp. Access: Instant. AC INI-Param: ENABLEPTIME Enumeration: 'enable': 1, 'disable': 0. |
| sipRetransmissionTCPTimeout | 1.3.6.1.4.1.5003.9.10.3.1.2.5.6 | unsigned32 | read-write |
SIP TCP time out (influence timerB and Timer F). Access: Instant. AC INI-Param: SIPTCPTIMEOUT |
| sipRetransmissionRetryAfterTime | 1.3.6.1.4.1.5003.9.10.3.1.2.5.7 | unsigned32 | read-write |
Retry After time for the proxy to be in state Unavailable. Access: Instant. AC INI-Param: RETRYAFTERTIME |
| sipRegistration | 1.3.6.1.4.1.5003.9.10.3.1.2.6 | |||
| sipRegistrationIsNeeded | 1.3.6.1.4.1.5003.9.10.3.1.2.6.1 | integer | read-write |
Is Proxy registration necessary. Access: Instant. AC INI-Param: ISREGISTERNEEDED Enumeration: 'yes': 1, 'no': 0. |
| sipRegistrationIP | 1.3.6.1.4.1.5003.9.10.3.1.2.6.2 | snmpadminstring | read-write |
SIP Registrar IP address. Access: Instant. AC INI-Param: REGISTRARIP |
| sipRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.2.6.3 | unsigned32 | read-write |
Time for which registration to Gatekeeper/Proxy is valid. Causes periodic registration (seconds). Access: Instant. AC INI-Param: RegistrationTime |
| sipRegistrationRegistrationRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.2.6.4 | unsigned32 | read-write |
Time in which the gateway will try to register after last registration failure (seconds). Access: Instant. AC INI-Param: REGISTRATIONRETRYTIME |
| sipRegistrationRegistrarName | 1.3.6.1.4.1.5003.9.10.3.1.2.6.5 | snmpadminstring | read-write |
SIP Registrar name. Access: Instant. AC INI-Param: REGISTRARNAME |
| sipRegistrationTimeDivider | 1.3.6.1.4.1.5003.9.10.3.1.2.6.6 | unsigned32 | read-write |
Percentage of RegistrationTime when the actual new REGISTER request will be sent out. Access: Instant. AC INI-Param: REGISTRATIONTIMEDIVIDER |
| sipRegistrationName | 1.3.6.1.4.1.5003.9.10.3.1.2.6.7 | snmpadminstring | read-write |
Gateway registration name. Access: Instant. AC INI-Param: GWREGISTRATIONNAME |
| sipRegistrationRegisterOnInviteFailure | 1.3.6.1.4.1.5003.9.10.3.1.2.6.8 | integer | read-write |
Enable ReRegister upon INVITE transaction failure. Access: Instant. AC INI-Param: REGISTERONINVITEFAILURE Enumeration: 'enable': 1, 'disable': 0. |
| sipRegistrationTimeThreshold | 1.3.6.1.4.1.5003.9.10.3.1.2.6.9 | unsigned32 | read-write |
If (REGISTRATIONTIMETHRESHOLD > 0) and (REGISTRATIONTIMETHRESHOLD < computed registration time using existing logic) then new registration time will be (Registration time from expires header - REGISTRATIONTIMETHRESHOLD). Access: Instant. AC INI-Param: REGISTRATIONTIMETHRESHOLD |
| sipRegistrationRegistrarTransportType | 1.3.6.1.4.1.5003.9.10.3.1.2.6.10 | integer | read-write |
Registrar transport type. Access: Instant. AC INI-Param: REGISTRARTRANSPORTTYPE Enumeration: 'tLS': 2, 'uDP': 0, 'tCP': 1, 'notConfigured': -1. |
| sipRegistrationReRegisterOnConnectionFailure | 1.3.6.1.4.1.5003.9.10.3.1.2.6.11 | integer | read-write |
Enables GW to perform Re-Registeration on TCP/TLS connection failure. Access: Instant. AC INI-Param: REREGISTERONCONNECTIONFAILURE Enumeration: 'enable': 1, 'disable': 0. |
| sipMisc | 1.3.6.1.4.1.5003.9.10.3.1.2.7 | |||
| sipMiscEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.2.7.1 | integer | read-write |
Enable Early Media. Access: Instant. AC INI-Param: ENABLEEARLYMEDIA Enumeration: 'yes': 1, 'no': 0. |
| sipMiscSipSessionExpires | 1.3.6.1.4.1.5003.9.10.3.1.2.7.2 | unsigned32 | read-write |
The SIP session will be refreshed (using INVITE) each time this timer expires (seconds). Access: Instant. AC INI-Param: SIPSESSIONEXPIRES |
| sipMiscIsUserPhone | 1.3.6.1.4.1.5003.9.10.3.1.2.7.3 | integer | read-write |
Add User=Phone parameter to SIP URL. Access: Instant. AC INI-Param: ISUSERPHONE Enumeration: 'yes': 1, 'no': 0. |
| sipMiscGatewayName | 1.3.6.1.4.1.5003.9.10.3.1.2.7.4 | snmpadminstring | read-write |
Gateway name. Access: Instant. AC INI-Param: SIPGATEWAYNAME |
| sipMiscPrackMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.5 | integer | read-write |
PRACK mechanism mode for 1XX reliable responses: 0- Disabled , 1- Supported , 2- Required. Access: Instant. AC INI-Param: PrackMode Enumeration: 'disabled': 0, 'supported': 1, 'required': 2. |
| sipMiscEnableRpiHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.6 | integer | read-write |
Enable Remote-Party-ID header. Access: Instant. AC INI-Param: ENABLERPIHEADER Enumeration: 'yes': 1, 'no': 0. |
| sipMiscXChannelHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.7 | integer | read-write |
0 (default): No special header 1:Add special header for trunk and B-Channel. Access: Instant. AC INI-Param: XCHANNELHEADER Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscAssertedIDMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.8 | integer | read-write |
Select Asserted Identity header method. Access: Instant. AC INI-Param: ASSERTEDIDMODE Enumeration: 'noHeaderAdded': 0, 'pAssertedIdRFC3325': 1, 'pPreferreddIdRFC3325': 2. |
| sipMiscIsUserPhoneInFrom | 1.3.6.1.4.1.5003.9.10.3.1.2.7.9 | integer | read-write |
Add 'User=Phone' to From header. Access: Instant. AC INI-Param: ISUSERPHONEINFROM Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscAddTon2Rpi | 1.3.6.1.4.1.5003.9.10.3.1.2.7.10 | integer | read-write |
Add Number Type and Plan to Remote-Party-ID header. Access: Instant. AC INI-Param: ADDTON2RPI Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnableCIC | 1.3.6.1.4.1.5003.9.10.3.1.2.7.11 | integer | read-write |
Enables CIC -> ISDN TNS IE interworking. Access: Instant. AC INI-Param: ENABLECIC Enumeration: 'yes': 1, 'no': 0. |
| sipMiscTransportType | 1.3.6.1.4.1.5003.9.10.3.1.2.7.12 | integer | read-write |
SIP transport type. Access: Instant. AC INI-Param: SIPTRANSPORTTYPE Enumeration: 'tls': 2, 'udp': 0, 'tcp': 1. |
| sipMiscISubNumberOfDigits | 1.3.6.1.4.1.5003.9.10.3.1.2.7.13 | unsigned32 | read-write |
Number of digits that will be taken from end of phone number as Subaddress. Access: Instant. AC INI-Param: ISUBNUMBEROFDIGITS |
| sipMiscSIP183Behaviour | 1.3.6.1.4.1.5003.9.10.3.1.2.7.14 | integer | read-write |
If this parameter set to 1, ALERT to ISDN will be sent upon 183 receive. Access: Instant. AC INI-Param: SIP183BEHAVIOUR Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscUseToHeaderAsCalledNum | 1.3.6.1.4.1.5003.9.10.3.1.2.7.15 | integer | read-write |
Use the user part of To header URL as called number (IP->TEL). Access: Instant. AC INI-Param: ISUSETOHEADERASCALLEDNUMBER Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnableSIPS | 1.3.6.1.4.1.5003.9.10.3.1.2.7.16 | integer | read-write |
Enable SIP secured URI usage. Access: Instant. AC INI-Param: ENABLESIPS Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnableSRVQuery | 1.3.6.1.4.1.5003.9.10.3.1.2.7.17 | integer | read-write |
Enable DNS SRV queries. Access: Instant. AC INI-Param: ENABLESRVQUERY Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscSubject | 1.3.6.1.4.1.5003.9.10.3.1.2.7.18 | snmpadminstring | read-write |
User-defined sip subject. Access: Instant. AC INI-Param: SIPSUBJECT |
| sipMiscUseSIPTgrp | 1.3.6.1.4.1.5003.9.10.3.1.2.7.19 | integer | read-write |
Use TGRP parameter 0 - disable [Default] , 1 - send only , 2 - send and use if in the RequestURI when receiving INVITE, 3 - Nortel Hotline. Access: Instant. AC INI-Param: USESIPTGRP Enumeration: 'sendOnly': 1, 'sendAndReceive': 2, 'disable': 0, 'nortelHotline': 3. |
| sipMiscSend180ForCallWaiting | 1.3.6.1.4.1.5003.9.10.3.1.2.7.20 | integer | read-write |
Send 180 for call waiting. Used for parties that do not support 182. Access: Instant. AC INI-Param: SEND180FORCALLWAITING Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscUserAgentDisplayInfo | 1.3.6.1.4.1.5003.9.10.3.1.2.7.21 | snmpadminstring | read-write |
String that will be displayed in the SIP Header 'User-Agent' or 'Server'. Access: Instant. AC INI-Param: USERAGENTDISPLAYINFO |
| sipMiscSessionExpiresMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.7.22 | integer | read-write |
Determines the Method which the SIP session will be using to referesh the session. Access: Instant. AC INI-Param: SESSIONEXPIRESMETHOD Enumeration: 'invite': 0, 'update': 1. |
| sipMiscEnableGRUU | 1.3.6.1.4.1.5003.9.10.3.1.2.7.23 | integer | read-write |
Obtain and use GRUU (Global Routable UserAgentURIs). Access: Instant. AC INI-Param: ENABLEGRUU Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscDNSQueryType | 1.3.6.1.4.1.5003.9.10.3.1.2.7.24 | integer | read-write |
DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE Enumeration: 'aRecord': 0, 'nAPTR': 2, 'sRV': 1. |
| sipMiscEnableHistoryInfo | 1.3.6.1.4.1.5003.9.10.3.1.2.7.25 | integer | read-write |
Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEHISTORYINFO Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnableTCPConnectionReuse | 1.3.6.1.4.1.5003.9.10.3.1.2.7.26 | integer | read-write |
Enable reuse of TCP connection. Access: Instant. AC INI-Param: ENABLETCPCONNECTIONREUSE Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscComfortNoiseNegotiation | 1.3.6.1.4.1.5003.9.10.3.1.2.7.27 | integer | read-write |
is CN payload type is used and being negotiate. Access: Instant. AC INI-Param: COMFORTNOISENEGOTIATION Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscMultiPtimeFormat | 1.3.6.1.4.1.5003.9.10.3.1.2.7.28 | integer | read-write |
Format of multiple ptime (ptime per coder) in outgoing SDP. Access: Instant. AC INI-Param: MULTIPTIMEFORMAT Enumeration: 'packetCable': 1, 'none': 0. |
| sipMiscRTPOnlyMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.29 | integer | read-write |
On RTP only mode their is no signalling protocol (for media parameters negotiation with the remote side). The channel is open immediately. The IP for the media is taken from the routing table. The RTP ports are corresponding to the local side ports. RTP-Only mode Values: 0 - regular call establishment 1 - No Signalling. The RTP channel open for Rx & Tx 2- No Signalling. The RTP channel open only for Tx 3 - No Signalling. The RTP channel open only for Rx. Access: Instant. AC INI-Param: RTPONLYMODE Enumeration: 'transmitOnly': 2, 'disable': 0, 'transmitNReceive': 1, 'receiveOnly': 3. |
| sipMiscEnableReasonHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.30 | integer | read-write |
Enable Reason header in the outgoing messages. Access: Instant. AC INI-Param: ENABLEREASONHEADER Enumeration: 'enable': 1, 'disable': 0. |
| sipMisc3xxBehavior | 1.3.6.1.4.1.5003.9.10.3.1.2.7.31 | integer | read-write |
3xx response behavior: Forwarding behavior - use different call identifiers Redirect behavior - use the same call identifiers: From, To & CallID. Access: Instant. AC INI-Param: 3XXBEHAVIOR Enumeration: 'forward': 0, 'redirect': 1. |
| sipMiscEnableSemiAttendedTransfer | 1.3.6.1.4.1.5003.9.10.3.1.2.7.32 | integer | read-write |
Semi-Attended Transfer when the session to the Target is not established. false - Use REFER with Replaces. true - Use CANCEL and REFER without Replaces if session is not established. Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscUseSIPURIForDiversionHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.33 | integer | read-write |
Use Tel uri or Sip uri for Diversion header. Access: Instant. AC INI-Param: UseSIPURIForDiversionHeader Enumeration: 'sip': 1, 'tel': 0. |
| sipMiscEnableVMURI | 1.3.6.1.4.1.5003.9.10.3.1.2.7.34 | integer | read-write |
Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEVMURI Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnablePChargingVector | 1.3.6.1.4.1.5003.9.10.3.1.2.7.35 | integer | read-write |
Generate P-Charging-Vector header [0] - disabled [1] - enabled. Access: Instant. AC INI-Param: ENABLEPCHARGINGVECTOR Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscPAssertedUserName | 1.3.6.1.4.1.5003.9.10.3.1.2.7.36 | snmpadminstring | read-write |
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: PASSERTEDUSERNAME |
| sipMiscSDPSessionOwner | 1.3.6.1.4.1.5003.9.10.3.1.2.7.37 | snmpadminstring | read-write |
The SDP owner string. Access: Instant. AC INI-Param: SIPSDPSESSIONOWNER |
| sipMiscResetOnINIFileDownload | 1.3.6.1.4.1.5003.9.10.3.1.2.7.38 | integer | read-write |
Determine if Reset after INI File Download is execute. Access: Instant. AC INI-Param: ResetOnINIFileDownload Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscSetDefaultOnIniFileProcess | 1.3.6.1.4.1.5003.9.10.3.1.2.7.39 | unsigned32 | read-write |
Determine if all parameters are set to their defaults before processing updated INI File. Access: Instant. AC INI-Param: SetDefaultOnIniFileProcess |
| sipMiscEnableContactRestriction | 1.3.6.1.4.1.5003.9.10.3.1.2.7.40 | integer | read-write |
Hides the user part of the URI in the Contact Header 0 - Disable 1 - Enable. Access: Instant. AC INI-Param: ENABLECONTACTRESTRICTION Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscEnablePAssociatedURIHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.41 | integer | read-write |
Handles the P-Associated-URI header in a 200OK response for a REGISTER request. Access: Instant. AC INI-Param: ENABLEPASSOCIATEDURIHEADER Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscMinSE | 1.3.6.1.4.1.5003.9.10.3.1.2.7.42 | unsigned32 | read-write |
Minimal value for session refresh. Access: Instant. AC INI-Param: MINSE |
| sipMiscApplicationProfile | 1.3.6.1.4.1.5003.9.10.3.1.2.7.43 | unsigned32 | read-write |
ApplicationProfile, read it later for validating that the board is theirs. Access: Offline. AC INI-Param: APPLICATIONPROFILE |
| sipMiscOPTIONSUserPart | 1.3.6.1.4.1.5003.9.10.3.1.2.7.44 | snmpadminstring | read-write |
Allow to configure the OPTIONS userpart string for all gateways. The default value should be empty string which means that we don't use this parameter. Another special value is 'empty' which means that the we don't populate the user part of the OPTIONS request URI. Any other value will be taken as is and used as the user part of the OPTIONS request URI. Access: Instant. AC INI-Param: OPTIONSUSERPART |
| sipMiscUseAORInReferToHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.45 | integer | read-write |
If enabled, we will use URI from To/From headers in Refer-To header. If disabled, we will take the URI from Contact. Access: Instant. AC INI-Param: USEAORINREFERTOHEADER Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscForkingHandlingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.46 | integer | read-write |
Decides the handling method to 18X response to forking 0 - Parallel handling - only the first 18X response is handled 1 - Sequential handling - all the 18X responses are handled. Access: Instant. AC INI-Param: FORKINGHANDLINGMODE Enumeration: 'sequential': 0, 'parallel': 1. |
| sipMiscOfferUnencryptedSRTCP | 1.3.6.1.4.1.5003.9.10.3.1.2.7.47 | integer | read-write |
If set to 1, the 'crypto' attribute includes the UNENCRYPTED_SRTCP parameter. If set to 1, the UNENCRYPTED_SRTCP parameter is not included. Access: Instant. AC INI-Param: OFFERUNENCRYPTEDSRTCP Enumeration: 'enable': 1, 'disable': 0. |
| sipMiscSourceNumberPreference | 1.3.6.1.4.1.5003.9.10.3.1.2.7.48 | snmpadminstring | read-write |
Determines from where the source number shall be taken from (in an incoming INVITE request). Parameter values: - NULL: no changes in current logic - FROM: source number is taken from 'FROM' field. Access: Instant. AC INI-Param: SOURCENUMBERPREFERENCE |
| sipSubscribe | 1.3.6.1.4.1.5003.9.10.3.1.2.8 | |||
| sipSubscribeEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.8.1 | integer | read-write |
This parameter related to Subscribe/UnSubscribe buttons. Access: Instant. AC INI-Param: SHOULDSUBSCRIBE Enumeration: 'enable': 1, 'disable': 0. |
| sipSubscribeRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.2.8.2 | unsigned32 | read-write |
MWI service subscription retry time after last subscription failure (seconds). Access: Instant. AC INI-Param: SUBSCRIBERETRYTIME |
| sipSubscribeEnableMWISubscription | 1.3.6.1.4.1.5003.9.10.3.1.2.8.3 | integer | read-write |
Enable subscription for Message Waiting Indicator service. Access: Instant. AC INI-Param: ENABLEMWISUBSCRIPTION Enumeration: 'enable': 1, 'disable': 0. |
| sipSubscribeSubscriptionMode | 1.3.6.1.4.1.5003.9.10.3.1.2.8.4 | integer | read-write |
Subscription Mode: 0 - Per Endpoint, 1 - Per Gateway. Access: Instant. AC INI-Param: SUBSCRIPTIONMODE Enumeration: 'perEndpoint': 0, 'perGateway': 1. |
| sipDigitalGW | 1.3.6.1.4.1.5003.9.10.3.1.2.9 | |||
| causeMapSIP2ISDNTable | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21 | no-access |
Cause Map SIP to ISDN Table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1 | no-access | |||
| causeMapSIP2ISDNIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.1 | unsigned32 | no-access |
AC INI-Param: CauseMapSip2Isdn_Index |
| causeMapSIP2ISDNRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| causeMapSIP2ISDNAction | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| causeMapSIP2ISDNActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| causeMapSIP2ISDNSIPResponse | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.5 | integer32 | read-write |
Access: Instant. AC INI-Param: CauseMapSip2Isdn_SipResponse |
| causeMapSIP2ISDNQ850Cause | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.6 | integer32 | read-write |
Access: Instant. AC INI-Param: CauseMapSip2Isdn_IsdnReleaseCause |
| causeMapISDN2SIPTable | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22 | no-access |
Cause Map SIP to ISDN Table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1 | no-access | |||
| causeMapISDN2SIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.1 | unsigned32 | no-access |
AC INI-Param: CauseMapIsdn2Sip_Index |
| causeMapISDN2SIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| causeMapISDN2SIPAction | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| causeMapISDN2SIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| causeMapISDN2SIPQ850Cause | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.5 | integer32 | read-write |
Access: Instant. AC INI-Param: CauseMapIsdn2Sip_IsdnReleaseCause |
| causeMapISDN2SIPSIPResponse | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.6 | integer32 | read-write |
Access: Instant. AC INI-Param: CauseMapIsdn2Sip_SipResponse |
| sipSAS | 1.3.6.1.4.1.5003.9.10.3.1.2.10 | |||
| sipSASEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.10.1 | integer | read-write |
Enables SAS functionality. Access: Offline. AC INI-Param: ENABLESAS Enumeration: 'enable': 1, 'disable': 0. |
| sipSASLocalSIPUdpPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.2 | unsigned32 | read-write |
Local SAS SIP port used for signaling over UDP. Access: Instant. AC INI-Param: SASLOCALSIPUDPPORT |
| sipSASDefaultGatewayIP | 1.3.6.1.4.1.5003.9.10.3.1.2.10.3 | snmpadminstring | read-write |
SIP SAS default IP address for incoming requests in emergency mode. Access: Instant. AC INI-Param: SASDEFAULTGATEWAYIP |
| sipSASLocalSIPTlsPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.4 | unsigned32 | read-write |
Local SAS SIP port used for signaling over TLS. Access: Instant. AC INI-Param: SASLOCALSIPTLSPORT |
| sipSASRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.2.10.5 | unsigned32 | read-write |
SAS will send this value in expires header while working in emergency mode. Access: Instant. AC INI-Param: SASREGISTRATIONTIME |
| sipSASShortNumberLength | 1.3.6.1.4.1.5003.9.10.3.1.2.10.6 | unsigned32 | read-write |
Upon incoming request the user info in the request is compared to the registered one. SAS performs comparison of the arrived user info with the suffix of the registered one. The length of the suffix is determined by this parameter. Access: Instant. AC INI-Param: SASSHORTNUMBERLENGTH |
| sipSASLocalSIPTcpPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.7 | unsigned32 | read-write |
Local SAS SIP port used for signaling over TCP. Access: Instant. AC INI-Param: SASLOCALSIPTCPPORT |
| sipSASProxySet | 1.3.6.1.4.1.5003.9.10.3.1.2.10.8 | unsigned32 | read-write |
Proxy Set Id for SAS. Access: Instant. AC INI-Param: SASPROXYSET |
| sipSASRedundantProxySet | 1.3.6.1.4.1.5003.9.10.3.1.2.10.9 | integer32 | read-write |
Proxy Set Id for Redundant SAS. Access: Instant. AC INI-Param: REDUNDANTSASPROXYSET |
| sipSASBindingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.10.10 | integer | read-write |
Defines the SAS database binding mode: 0 - URI dependant 1 - according to user part. Access: Instant. AC INI-Param: SASBINDINGMODE Enumeration: 'userPartOnly': 1, 'uRI': 0. |
| sipSASSurvivabilityMode | 1.3.6.1.4.1.5003.9.10.3.1.2.10.11 | integer | read-write |
Defines the SAS working mode: 0 - Standard Mode (working with configured proxy set) 1 - Always emergency mode (working without proxy) 2 - Ignore REGISTER in normal mode. Access: Instant. AC INI-Param: SASSURVIVABILITYMODE Enumeration: 'alwaysEmergency': 1, 'ignoreRegister': 2, 'standard': 0. |
| sipSASEnableENUM | 1.3.6.1.4.1.5003.9.10.3.1.2.10.12 | integer | read-write |
Enables SAS to perform ENUM query when receiving INVITE messages in emergency mode. Access: Instant. AC INI-Param: SASENABLEENUM Enumeration: 'enable': 1, 'disable': 0. |
| sipSASEnableRecordRoute | 1.3.6.1.4.1.5003.9.10.3.1.2.10.13 | integer | read-write |
Enables SAS to add record-Route header to requests. Access: Instant. AC INI-Param: SASENABLERECORDROUTE Enumeration: 'enable': 1, 'disable': 0. |
| sasRegistrationManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21 | no-access |
GWAPP SAS Registration Manipulation Table. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1 | no-access | |||
| sasRegistrationManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.1 | unsigned32 | no-access |
AC INI-Param: SASRegistrationManipulation_Index |
| sasRegistrationManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.2 | rowstatus | read-only |
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| sasRegistrationManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sasRegistrationManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| sasRegistrationManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.5 | unsigned32 | read-only |
Access: Instant. AC INI-Param: SASRegistrationManipulation_RemoveFromRight |
| sasRegistrationManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.6 | unsigned32 | read-only |
Access: Instant. AC INI-Param: SASRegistrationManipulation_LeaveFromRight |
| h323 | 1.3.6.1.4.1.5003.9.10.3.1.3 | |||
| h323SourceEncodType | 1.3.6.1.4.1.5003.9.10.3.1.3.1 | integer | read-write |
Calling number coding type in Setup message. Access: Instant. AC INI-Param: SOURCEENCODTYPE Enumeration: 'nPIAndTON': 3, 'h323-Id': 1, 'e164': 0, 'h323-IdAndE164': 2, 'nPIAndTONAndH323-Id': 4. |
| h323DestEncodType | 1.3.6.1.4.1.5003.9.10.3.1.3.2 | integer | read-write |
Called number coding type in Setup message. Access: Instant. AC INI-Param: DESTENCODTYPE Enumeration: 'nPIAndTON': 3, 'h323-Id': 1, 'e164': 0, 'h323-IdAndE164': 2, 'nPIAndTONAndH323-Id': 4. |
| h323H323IDString | 1.3.6.1.4.1.5003.9.10.3.1.3.3 | snmpadminstring | read-write |
Definition of Gateway H.323-ID source field. Access: Instant. AC INI-Param: H323IDSTRING |
| h323ConnectionModes | 1.3.6.1.4.1.5003.9.10.3.1.3.10 | |||
| h323ConnectionModesIsTunnelingUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.10.1 | integer | read-write |
Use H.323 Tunneling call setup procedure. Access: Instant. AC INI-Param: ISTUNNELINGUSED Enumeration: 'yes': 1, 'no': 0. |
| fastStart | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5 | |||
| fastStartIsFastConnectUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.1 | integer | read-write |
Use H.323 Fast Start call setup procedure. Access: Instant. AC INI-Param: ISFASTCONNECTUSED Enumeration: 'yes': 1, 'no': 0. |
| fastStartOpenH245OnFS | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.2 | unsigned32 | read-write |
Open H.245 when using Fast Start call setup procedure. Access: Instant. AC INI-Param: OPENH245ONFS |
| fastStartIsFSMediaInfoSendOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.3 | integer | read-write |
Is Fast start Media sent in in Connect or in Alert. Access: Instant. AC INI-Param: ISFSMEDIAINFOSENDONCONNECT Enumeration: 'yes': 1, 'no': 0. |
| fastStartIsFSOpenMediaOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.4 | integer | read-write |
Open voice channel afer sending Connect or after sending Alert. Access: Instant. AC INI-Param: ISFSOPENMEDIAONCONNECT Enumeration: 'yes': 1, 'no': 0. |
| h323GK | 1.3.6.1.4.1.5003.9.10.3.1.3.11 | |||
| h323GKIsGateKeeperUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.1 | integer | read-write |
Is gateway using a H.323 Gatekeeper. Access: Offline. AC INI-Param: ISGATEKEEPERUSED Enumeration: 'yes': 1, 'no': 0. |
| h323GKGwRegistrType | 1.3.6.1.4.1.5003.9.10.3.1.3.11.2 | integer | read-write |
Type of Gatekeeper registration. Access: Instant. AC INI-Param: GWREGISTRTYPE Enumeration: 'nPIAndTON': 3, 'h323-Id': 1, 'e164': 0, 'h323-IdAndE164': 2, 'nPIAndTONAndH323-Id': 4. |
| h323GKIsGkFallbackUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.3 | integer | read-write |
Allow fallback to internal Tel to IP routing table if Gatekeeper/Proxy is not responding. Access: Offline. AC INI-Param: ISFALLBACKUSED Enumeration: 'yes': 1, 'no': 0. |
| h323GKCanMapAliases | 1.3.6.1.4.1.5003.9.10.3.1.3.11.4 | integer | read-write |
If enabled, Gatekeeper can change gateway destination number using the Alias parameter in ACF message. Access: Instant. AC INI-Param: CANMAPALIASES Enumeration: 'yes': 1, 'no': 0. |
| h323GKResponseTimeout | 1.3.6.1.4.1.5003.9.10.3.1.3.11.5 | unsigned32 | read-write |
Time in which the gateway waits for a RAS response from the Gatekeeper before retransmission (seconds). Access: Instant. AC INI-Param: RESPONSETIMEOUT |
| h323GKMaxRetries | 1.3.6.1.4.1.5003.9.10.3.1.3.11.6 | unsigned32 | read-write |
Maximum number of retransmissions of RAS messages to Gatekeeper. Access: Instant. AC INI-Param: MAXRETRIES |
| h323GKRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.3.11.7 | unsigned32 | read-write |
Time in seconds for which registration to Gatekeeper/Proxy is valid. cause periodic registration. Access: Offline. AC INI-Param: REGISTRATIONTIME |
| h323GKIsTerminal | 1.3.6.1.4.1.5003.9.10.3.1.3.11.8 | integer | read-write |
The gateway registers as a H.323 terminal with multiple aliases. Otherwise, the gateway behaves as an H.323 gateway. Access: Instant. AC INI-Param: ISTERMINAL Enumeration: 'yes': 1, 'no': 0. |
| h323GKGatekeeperID | 1.3.6.1.4.1.5003.9.10.3.1.3.11.9 | snmpadminstring | read-write |
Gatekeeper Identification name, to be used in Registration Request (RRQ) messages. Access: Instant. AC INI-Param: GATEKEEPERID |
| h323GKEnablePregrantARQ | 1.3.6.1.4.1.5003.9.10.3.1.3.11.10 | integer | read-write |
ARQ message won't be sent if the Gatekeeper has pre-granted admission. Access: Instant. AC INI-Param: ENABLEPREGRANTARQ Enumeration: 'enable': 1, 'disable': 0. |
| h323GKRegister | 1.3.6.1.4.1.5003.9.10.3.1.3.11.11 | integer | read-write |
This parameter related to Register/UnRegister buttons. Access: Instant. AC INI-Param: SHOULDREGISTER Enumeration: 'enable': 1, 'disable': 0. |
| h323GKAlternativeGKUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.12 | integer | read-write |
Allows working with Alternative GK that should be provided by GK. Access: Offline. AC INI-Param: ALTERNATIVEGKUSED Enumeration: 'enable': 1, 'disable': 0. |
| h323GKUseRedundantGKOnRRJ | 1.3.6.1.4.1.5003.9.10.3.1.3.11.13 | integer | read-write |
Useredundant Gatekeeper on receiving RRJ message. Access: Offline. AC INI-Param: USEREDUNDANTGKONRRJ Enumeration: 'enable': 1, 'disable': 0. |
| h323GKEnableGKAutoDiscovery | 1.3.6.1.4.1.5003.9.10.3.1.3.11.14 | integer | read-write |
Enables GK automatic discovery mechanism. Access: Offline. AC INI-Param: ENABLEGKAUTODISCOVERY Enumeration: 'enable': 1, 'disable': 0. |
| h323GKGKAutoDiscoveryIP | 1.3.6.1.4.1.5003.9.10.3.1.3.11.15 | ipaddress | read-write |
Multicast IP Address for GK automatic discovery. Access: Offline. AC INI-Param: GKAUTODISCOVERYIP |
| gkIPTable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21 | no-access | ||
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1 | no-access | |||
| gkIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: GateKeeperIp_Index |
| gkIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.2 | rowstatus | read-only |
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| gkIPAction | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| gkIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| gkIPGatekeeperIP | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.5 | snmpadminstring | read-only |
IP of GK. Access: Offline. AC INI-Param: GateKeeperIp_IpAddress |
| gkIPGateleeperID | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.6 | snmpadminstring | read-only |
ID of GK. Access: Offline. AC INI-Param: GateKeeperIp_Id |
| registerPrefixTable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22 | no-access |
The registration prefixes are applicable for Digital E1/T1 and FXO gateways for registration to Gatekeeper. If not used the gateway will register with its endpoint phone numbers. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1 | no-access | |||
| registerPrefixIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: RegistrationPrefix_Index |
| registerPrefixRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.2 | rowstatus | read-only |
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| registerPrefixAction | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| registerPrefixActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| registerPrefixPrefix | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.5 | snmpadminstring | read-only |
Usually the prefixes will define range of PSTN/PBX phone numbers that the gateway can handle. Access: Offline. AC INI-Param: RegistrationPrefix_Prefix |
| registerPrefixNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.6 | integer | read-only |
Number Plan that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberPlan Enumeration: 'unknown': 0, 'private': 9, 'e164Public': 1. |
| registerPrefixNumberType | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.7 | integer | read-only |
Number Type that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberType Enumeration: 'abbreviated': 6, 'unknown': 0, 'networkSpecific-NetworkPISN': 3, 'subscriber-Level0Regional': 4, 'international-Level2Regional': 1, 'national-Level1Regional': 2. |
| gkRedundancy | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30 | |||
| gkRedundancyUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.1 | integer | read-write |
Allow Gatekeeper redundancy. At least one redundant Gatekeeper should be defined. Access: Instant. AC INI-Param: ISREDUNDANTGKUSED Enumeration: 'yes': 1, 'no': 0. |
| gkRedundancyTimeBetweenGKsLoops | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.2 | unsigned32 | read-write |
Time between the gateway retries to connect to Gatekeeper if connection was lost (seconds). Access: Instant. AC INI-Param: TIMEBETWEENGKSLOOPS |
| gkRAI | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31 | |||
| gkRAIEnable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.1 | integer | read-write |
Enable sending of H.323 Resource Avaialable Indication message to Gatekeeper due to overload. Access: Instant. AC INI-Param: ENABLERAI Enumeration: 'yes': 1, 'no': 0. |
| gkRAIHighThreshold | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.2 | unsigned32 | read-write |
Percentage of active calls in order to send 'Almost out of resources' RAI. Access: Instant. AC INI-Param: RAIHIGHTHRESHOLD |
| gkRAILowThreshold | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.3 | unsigned32 | read-write |
percentage of active calls to send 'Resources OK' RAI. Access: Instant. AC INI-Param: RAILOWTHRESHOLD |
| gkRAILoopTime | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.4 | unsigned32 | read-write |
Time period to check call resources (seconds). Access: Instant. AC INI-Param: RAILOOPTIME |
| h323DTMF | 1.3.6.1.4.1.5003.9.10.3.1.3.12 | |||
| h323DTMFHookFlashOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.1 | integer | read-write |
Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION Enumeration: 'none': 0, 'h245UserInput': 1, 'q931UserInfo': 3, 'h245Signal': 2. |
| h323DTMFRxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.2 | integer | read-write |
Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: ISFALLBACKUSED Enumeration: 'none': 0, 'h245UserInput': 1, 'rFC2833': 3, 'h245Signal': 2, 'all': 4. |
| dTMFOptionsTable | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21 | no-access |
The names of the five possible coders. |
|
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1 | no-access | |||
| dTMFOptionsIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.1 | unsigned32 | no-access |
Entry number, starting at 0. AC INI-Param: N/A |
| dTMFOptionsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.2 | rowstatus | read-only |
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| dTMFOptionsAction | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.3 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dTMFOptionsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.4 | integer | read-only |
Development Impending. AC INI-Param: N/A Enumeration: 'developmentImpending': 0. |
| dTMFOptionsTxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.5 | integer | read-only |
Transmit DTMF option. Access: Instant. AC INI-Param: N/A Enumeration: 'rFC2833': 4, 'none': 0, 'h245UserInput': 1, 'q931UserInfo': 3, 'h245Signal': 2. |
| h323Ports | 1.3.6.1.4.1.5003.9.10.3.1.3.13 | |||
| h323PortsH225ListenPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.1 | unsigned32 | read-write |
Port on which the gateway expects to receive H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225LISTENPORT |
| h323PortsH225DialPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.2 | unsigned32 | read-write |
Port on which the gateway sends H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225DIALPORT |
| h323PortsH323BasePort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.3 | unsigned32 | read-write |
Defines range for gateway H.225/H.245 local port messages. Access: Offline. AC INI-Param: H323BASEPORT |
| h323PortsRasSourcePort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.4 | unsigned32 | read-write |
RAS requests source port. Access: Instant. AC INI-Param: RASSOURCEPORT |
| h323PortsRasDestPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.5 | unsigned32 | read-write |
RAS requests destination port. Access: Instant. AC INI-Param: RASDESTPORT |
| h323Auth | 1.3.6.1.4.1.5003.9.10.3.1.3.14 | |||
| h323AuthEnableH235Security | 1.3.6.1.4.1.5003.9.10.3.1.3.14.1 | integer | read-write |
Enable H.235 security. Access: Offline. AC INI-Param: ENABLEH235SECURITY Enumeration: 'yes': 1, 'no': 0. |
| h323AuthUserName | 1.3.6.1.4.1.5003.9.10.3.1.3.14.2 | snmpadminstring | read-write |
User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| h323AuthPassword | 1.3.6.1.4.1.5003.9.10.3.1.3.14.3 | snmpadminstring | read-write |
Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| h323Misc | 1.3.6.1.4.1.5003.9.10.3.1.3.15 | |||
| h323MiscIsSetupIncludeNum | 1.3.6.1.4.1.5003.9.10.3.1.3.15.1 | integer | read-write |
Setup message contains called party number. Access: Instant. AC INI-Param: ISSETUPINCLUDENUM Enumeration: 'yes': 1, 'no': 0. |
| h323MiscIsSetupAckUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.15.2 | integer | read-write |
Enable SetupAck messages for overlap mode. Access: Instant. AC INI-Param: ISSETUPACKUSED Enumeration: 'yes': 1, 'no': 0. |
| h323MiscH245InitTimeOut | 1.3.6.1.4.1.5003.9.10.3.1.3.15.3 | unsigned32 | read-write |
h245.channelsTimeout value. Access: Offline. AC INI-Param: H245INITTIMEOUT |
| h323MiscEnableQ931Cause | 1.3.6.1.4.1.5003.9.10.3.1.3.15.4 | integer | read-write |
H.225 Reason / Q.931 Cause is sent in H.323 Release Complete message. Access: Instant. AC INI-Param: ENABLEQ931CAUSE Enumeration: 'yes': 1, 'no': 0. |
| h323MiscEnableQ931Multiplexing | 1.3.6.1.4.1.5003.9.10.3.1.3.15.5 | integer | read-write |
Use same socket for all H.225 messages. Access: Instant. AC INI-Param: ENABLEQ931MULTIPLEXING Enumeration: 'yes': 1, 'no': 0. |
| h323MiscSendChannelNonStandard | 1.3.6.1.4.1.5003.9.10.3.1.3.15.6 | integer | read-write |
Send trunk and bchannel numbers on setup and call proceeding messages as nonStandard data. Access: Instant. AC INI-Param: SENDCHANNELNONSTANDARD Enumeration: 'yes': 1, 'no': 0. |
| h323MiscH245RoundTripTime | 1.3.6.1.4.1.5003.9.10.3.1.3.15.7 | unsigned32 | read-write |
Time between H.245 Round Trip Delay messages (seconds). Access: Instant. AC INI-Param: H245ROUNDTRIPTIME |
| h323MiscProgressBehavior | 1.3.6.1.4.1.5003.9.10.3.1.3.15.8 | integer | read-write |
Interworking behavior of Progress message (0-Alert, 1-Progress). Access: Instant. AC INI-Param: H323PROGRESSBEHAVIOR Enumeration: 'progress': 1, 'alert': 0. |