A3COM-HUAWEI-DOT11-WLANEXT-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: A3COM-HUAWEI-DOT11-WLANEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, A3COM-HUAWEI-DOT11-REF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cDot11WLANEXT 1.3.6.1.4.1.43.45.1.10.2.75.7
This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
     h3cDot11RFGroup 1.3.6.1.4.1.43.45.1.10.2.75.7.1
         h3cDot11RFSignalStatisTable 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1 no-access
The table will describe statistic information of signal strength for AP radio.
             h3cDot11RFSignalStatisEntry 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1 no-access
Each entry contains the signal of each signal strength information of a specific AP.
                 h3cDot11RFAPID 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.1 h3cdot11objectidtype no-access
To identify each AP, and AP is running status.
                 h3cDot11RFRadioID 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.2 h3cdot11radioscopetype no-access
Represents each radio.
                 h3cDot11RFSignalStatisInterv 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.3 integer32 read-only
Represents the interval of statistic.
                 h3cDot11RFAverageSignalStrength 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.4 integer32 read-only
Represents the average value of signal strength for stations on a specific radio.
                 h3cDot11RFMaxSignalStrength 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.5 integer32 read-only
Represents the maximum value of signal strength for stations on a specific radio.
                 h3cDot11RFMinSignalStrength 1.3.6.1.4.1.43.45.1.10.2.75.7.1.1.1.6 integer32 read-only
Represents the minimum value of signal strength for stations on a specific radio.
     h3cDot11QosGroup 1.3.6.1.4.1.43.45.1.10.2.75.7.2
         h3cDot11QosStatisTable 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1 no-access
The table defines the attributes for the Qos feature of radio.
             h3cDot11QosStatisEntry 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1 no-access
Each entry contains information of the Qos attribute of each radio.
                 h3cDot11QosAPID 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1.1 h3cdot11objectidtype no-access
To uniquely identify a AP in running status.
                 h3cDot11QosRadioID 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1.2 h3cdot11radioscopetype no-access
Represents each radio.
                 h3cDot11QosAverageQueLen 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1.3 integer32 read-only
The average frame numbers to be sent out in the queue.
                 h3cDot11QosDropFrameRatio 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1.4 integer32 read-only
The ratio of dropped frames in a minute because of full queue.
                 h3cDot11QosAverageDataRate 1.3.6.1.4.1.43.45.1.10.2.75.7.2.1.1.5 integer32 read-only
The average transmit data rate of radio.
         h3cDot11QosAcStatisTable 1.3.6.1.4.1.43.45.1.10.2.75.7.2.2 no-access
The table defines the parameters for Qos access category.
             h3cDot11QosAcStatisEntry 1.3.6.1.4.1.43.45.1.10.2.75.7.2.2.1 no-access
Each entry contains information of each Qos access category.
                 h3cDot11QosAcType 1.3.6.1.4.1.43.45.1.10.2.75.7.2.2.1.1 h3cdot11qosactype no-access
The access category type.
                 h3cDot11AcDropFrameCnt 1.3.6.1.4.1.43.45.1.10.2.75.7.2.2.1.2 counter32 read-only
The number of dropped frames in a minute for one specific access category because of full queue.