A3COM-HUAWEI-DOT11-CFGEXT-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: A3COM-HUAWEI-DOT11-CFGEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, A3COM-HUAWEI-DOT11-REF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cDot11CFGEXT 1.3.6.1.4.1.43.45.1.10.2.75.6
This MIB provides information for WLAN configuration extended. The h3c-dot11-cfg.mib define MIB objects for WLAN basic configuration, while this MIB will define MIB objects for load balance these kinds feature. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
     h3cDot11LoadBalance 1.3.6.1.4.1.43.45.1.10.2.75.6.1
         h3cDot11LBGlobalGroup 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1
             h3cDot11LoadBalanceTrafficEnable 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.1 truthvalue read-write
Represents whether enable load balancing according to station traffic.
             h3cDot11LoadBalanceTrafficThres 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.2 integer32 read-write
Represents the threshold value for Traffic based load balancing.
             h3cDot11LoadBalanceSessionEnable 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.3 truthvalue read-write
Represents whether enable load balancing according to station session number.
             h3cDot11LoadBalanceSessionThres 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.4 integer32 read-write
Represents the threshold value for session number based load balancing.
             h3cDot11LoadBalanceTrafficGap 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.5 integer32 read-write
Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold and session gap are exceeded.
             h3cDot11LoadBalanceSessionGap 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.6 integer32 read-write
Session gap threshold. Load balancing is carried out for a radio when the session threshold and session gap are exceeded.
             h3cDot11LBTrafficThresKbps 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.7 integer32 read-write
Represents the threshold value for Traffic based load balancing.
             h3cDot11LBTrafficGapKbps 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.8 integer32 read-write
Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold gap are exceeded.
         h3cDot11LBRadioGroupTable 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2 no-access
This table defines load balance radio group.
             h3cDot11LBRadioGroupEntry 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1 no-access
Each entry contains information of one load balance radio group.
                 h3cDot11LBRadioGroupId 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.1 unsigned32 no-access
Represents load balance radio group ID.
                 h3cDot11LBRadioGroupDesc 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.2 octet string read-only
Represents the description of load balance radio group.
                 h3cDot11LBRadioGroupRowStatus 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.3 rowstatus read-only
The row status of this table entry.