ZYXEL-ves1608FE57-MIB: View SNMP OID List / Download MIB
VENDOR: ZYXEL COMMUNICATIONS CORP.
Home | MIB: ZYXEL-ves1608FE57-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
zyxel | 1.3.6.1.4.1.890 | |||
products | 1.3.6.1.4.1.890.1 | |||
accessSwitch | 1.3.6.1.4.1.890.1.5 | |||
vesSeries | 1.3.6.1.4.1.890.1.5.12 | |||
ves1608FE57 | 1.3.6.1.4.1.890.1.5.12.43 | |||
sysInfo | 1.3.6.1.4.1.890.1.5.12.43.1 | |||
sysSwPlatformMajorVers | 1.3.6.1.4.1.890.1.5.12.43.1.1 |
SW platform major version, e.g. 3. |
||
sysSwPlatformMinorVers | 1.3.6.1.4.1.890.1.5.12.43.1.2 |
SW platform minor version, e.g. 50. |
||
sysSwModelString | 1.3.6.1.4.1.890.1.5.12.43.1.3 |
Model letters, e.g. TJ |
||
sysSwVersionControlNbr | 1.3.6.1.4.1.890.1.5.12.43.1.4 |
Version control number, e.g. 0. |
||
sysSwDay | 1.3.6.1.4.1.890.1.5.12.43.1.5 |
SW compilation day, e.g. 19. |
||
sysSwMonth | 1.3.6.1.4.1.890.1.5.12.43.1.6 |
SW compilation month, e.g. 8. |
||
sysSwYear | 1.3.6.1.4.1.890.1.5.12.43.1.7 |
SW compilation year, e.g. 2004. |
||
sysHwMajorVers | 1.3.6.1.4.1.890.1.5.12.43.1.8 |
HW major version number, e.g. 1. |
||
sysHwMinorVers | 1.3.6.1.4.1.890.1.5.12.43.1.9 |
HW minor version number, e.g. 0. |
||
sysSerialNumber | 1.3.6.1.4.1.890.1.5.12.43.1.10 |
Serial number |
||
sysFirmwareVersion | 1.3.6.1.4.1.890.1.5.12.43.1.11 |
VDSL Switch Firmware Version |
||
sysModemCodeVersion | 1.3.6.1.4.1.890.1.5.12.43.1.12 |
VDSL Modem Code Version |
||
sysPowerInfo | 1.3.6.1.4.1.890.1.5.12.43.1.13 |
CO Power info |
||
sysSwBootUpImage | 1.3.6.1.4.1.890.1.5.12.43.1.14 |
Current system boot up image, You can change the boot up image of next rebooting by setting sysMgmtBootupImage. |
||
sysImage1FwVersion | 1.3.6.1.4.1.890.1.5.12.43.1.15 |
VDSL Switch Image 1 Firmware Version |
||
sysImage2FwVersion | 1.3.6.1.4.1.890.1.5.12.43.1.16 |
VDSL Switch Image 2 Firmware Version |
||
brLimitSetup | 1.3.6.1.4.1.890.1.5.12.43.3 | |||
brLimitState | 1.3.6.1.4.1.890.1.5.12.43.3.1 |
Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
||
brLimitPortTable | 1.3.6.1.4.1.890.1.5.12.43.3.2 | |||
1.3.6.1.4.1.890.1.5.12.43.3.2.1 |
An entry in brLimitPortTable. |
|||
brLimitPortBrState | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.1 |
Broadcast rate limiting enabled/disabled on the port. |
||
brLimitPortBrRate | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.2 |
Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
||
brLimitPortMcState | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.3 |
Multicast rate limiting enabled/disabled on the port. |
||
brLimitPortMcRate | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.4 |
AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
||
brLimitPortDlfState | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.5 |
Destination lookup failure frames rate limiting enabled/disabled on the port. |
||
brLimitPortDlfRate | 1.3.6.1.4.1.890.1.5.12.43.3.2.1.6 |
Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
||
portSecuritySetup | 1.3.6.1.4.1.890.1.5.12.43.4 | |||
portSecurityState | 1.3.6.1.4.1.890.1.5.12.43.4.1 |
0: disable, 1:enable port security, 2:enable vlan security |
||
portSecurityPortTable | 1.3.6.1.4.1.890.1.5.12.43.4.2 | |||
1.3.6.1.4.1.890.1.5.12.43.4.2.1 |
An entry in portSecurityPortTable. |
|||
portSecurityPortState | 1.3.6.1.4.1.890.1.5.12.43.4.2.1.1 |
Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object. |
||
portSecurityPortLearnState | 1.3.6.1.4.1.890.1.5.12.43.4.2.1.2 |
MAC address learning enabled/disable on the port. |
||
portSecurityPortCount | 1.3.6.1.4.1.890.1.5.12.43.4.2.1.3 |
Number of (dynamic) MAC addresses that may be learned on the port. |
||
portSecurityMacFreeze | 1.3.6.1.4.1.890.1.5.12.43.4.3 |
This entry is used to execute MacFreeze action to port. Its meaningless while reading this entry. |
||
vlanTrunkSetup | 1.3.6.1.4.1.890.1.5.12.43.5 | |||
vlanTrunkPortTable | 1.3.6.1.4.1.890.1.5.12.43.5.1 | |||
1.3.6.1.4.1.890.1.5.12.43.5.1.1 |
An entry in vlanTrunkPortTable. |
|||
vlanTrunkPortState | 1.3.6.1.4.1.890.1.5.12.43.5.1.1.1 |
VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
||
ctlProtTransSetup | 1.3.6.1.4.1.890.1.5.12.43.6 | |||
ctlProtTransState | 1.3.6.1.4.1.890.1.5.12.43.6.1 |
Bridge control protocol transparency enabled/disabled for the switch |
||
ctlProtTransTunnelPortTable | 1.3.6.1.4.1.890.1.5.12.43.6.2 | |||
1.3.6.1.4.1.890.1.5.12.43.6.2.1 |
An entry in ctlProtTransTunnelPortTable. |
|||
ctlProtTransTunnelMode | 1.3.6.1.4.1.890.1.5.12.43.6.2.1.1 |
Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3) |
||
vlanStackSetup | 1.3.6.1.4.1.890.1.5.12.43.7 | |||
vlanStackState | 1.3.6.1.4.1.890.1.5.12.43.7.1 |
VLAN Stacking enabled/disabled for the switch. |
||
vlanStackTpid | 1.3.6.1.4.1.890.1.5.12.43.7.2 |
SP TPID in hex format, e.g. 8100. |
||
vlanStackPortTable | 1.3.6.1.4.1.890.1.5.12.43.7.3 | |||
1.3.6.1.4.1.890.1.5.12.43.7.3.1 |
An entry in vlanStackPortTable. |
|||
vlanStackPortMode | 1.3.6.1.4.1.890.1.5.12.43.7.3.1.1 |
Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service providers network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service providers network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. normal (1), Access (2), tunnel (3) |
||
vlanStackPortVid | 1.3.6.1.4.1.890.1.5.12.43.7.3.1.2 |
VLAN ID used in service provider tag. |
||
vlanStackPortPrio | 1.3.6.1.4.1.890.1.5.12.43.7.3.1.3 |
Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest. |
||
vlanStackTunnelPortTpid | 1.3.6.1.4.1.890.1.5.12.43.7.3.1.4 |
Tunnel Port TPID in hex format, e.g. 8100. |
||
vlanStackPCopyCtagPrio | 1.3.6.1.4.1.890.1.5.12.43.7.3.1.5 | |||
selectiveQinQTable | 1.3.6.1.4.1.890.1.5.12.43.7.4 | |||
1.3.6.1.4.1.890.1.5.12.43.7.4.1 |
An entry in selective qinq table |
|||
selectiveQinQName | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.1 |
The name of selective qinq entry |
||
selectiveQinQPort | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.2 |
interface port id |
||
selectiveQinQCvid | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.3 |
inner vid |
||
selectiveQinQSpvid | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.4 |
outer vid |
||
selectiveQinQPriority | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.5 |
priority |
||
selectiveQinQRowStatus | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.6 | |||
selectiveQinQACtivePrio | 1.3.6.1.4.1.890.1.5.12.43.7.4.1.7 |
Use the value for priority for Stag |
||
portBasedInnerQTable | 1.3.6.1.4.1.890.1.5.12.43.7.5 | |||
1.3.6.1.4.1.890.1.5.12.43.7.5.1 |
An entry in PortBasedInnerQTable. |
|||
portBasedInnerQVid | 1.3.6.1.4.1.890.1.5.12.43.7.5.1.1 |
VLAN ID used in inner tag. |
||
portBasedInnerQPrio | 1.3.6.1.4.1.890.1.5.12.43.7.5.1.2 |
Priority value for inner tag. 0 is the lowest priority level and 7 is the highest. |
||
portBasedInnerQActive | 1.3.6.1.4.1.890.1.5.12.43.7.5.1.3 | |||
portBasedInnerQTxUntag | 1.3.6.1.4.1.890.1.5.12.43.7.5.1.4 |
Tx without Ctag (Only active when innerQ is enable) |
||
dot1xSetup | 1.3.6.1.4.1.890.1.5.12.43.8 | |||
portAuthState | 1.3.6.1.4.1.890.1.5.12.43.8.3 |
802.1x port authentication enabled/disabled for the switch. |
||
portAuthTable | 1.3.6.1.4.1.890.1.5.12.43.8.4 | |||
1.3.6.1.4.1.890.1.5.12.43.8.4.1 |
An entry in portAuthTable. |
|||
portAuthEntryState | 1.3.6.1.4.1.890.1.5.12.43.8.4.1.1 |
802.1x port authentication enabled or disabled on the port. |
||
portReAuthEntryState | 1.3.6.1.4.1.890.1.5.12.43.8.4.1.2 |
802.1x port re-authentication enabled or disabled on the port. |
||
portReAuthEntryTimer | 1.3.6.1.4.1.890.1.5.12.43.8.4.1.3 |
Re-authentication timer in seconds. |
||
hwMonitorInfo | 1.3.6.1.4.1.890.1.5.12.43.9 | |||
fanRpmTable | 1.3.6.1.4.1.890.1.5.12.43.9.1 | |||
1.3.6.1.4.1.890.1.5.12.43.9.1.1 |
An entry in fanRpmTable. |
|||
fanRpmIndex | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.1 |
Index of FAN. |
||
fanRpmCurValue | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.2 |
Current speed in Revolutions Per Minute (RPM) on the fan. |
||
fanRpmMaxValue | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.3 |
Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
||
fanRpmMinValue | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.4 |
Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
||
fanRpmLowThresh | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.5 |
The minimum speed at which a normal fan should work. |
||
fanRpmDescr | 1.3.6.1.4.1.890.1.5.12.43.9.1.1.6 |
Normal indicates that this fan is functioning above the minimum speed. Error indicates that this fan is functioning below the minimum speed. |
||
tempTable | 1.3.6.1.4.1.890.1.5.12.43.9.2 | |||
1.3.6.1.4.1.890.1.5.12.43.9.2.1 |
An entry in tempTable. |
|||
tempIndex | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.1 |
Index of temperature unit. 1:CPU, 2:DSP, 3:HW monitor chip |
||
tempCurValue | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.2 |
The current temperature measured at this sensor. |
||
tempMaxValue | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.3 |
The maximum temperature measured at this sensor. |
||
tempMinValue | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.4 |
The minimum temperature measured at this sensor. |
||
tempHighThresh | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.5 |
The upper temperature limit at this sensor. |
||
tempDescr | 1.3.6.1.4.1.890.1.5.12.43.9.2.1.6 |
Normal indicates temperatures below the threshold and Error for those above. |
||
voltageTable | 1.3.6.1.4.1.890.1.5.12.43.9.3 | |||
1.3.6.1.4.1.890.1.5.12.43.9.3.1 |
An entry in voltageTable. |
|||
voltageIndex | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.1 |
Index of voltage. |
||
voltageCurValue | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.2 |
The current voltage reading. |
||
voltageMaxValue | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.3 |
The maximum voltage measured at this point. |
||
voltageMinValue | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.4 |
The minimum voltage measured at this point. |
||
voltageNominalValue | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.5 |
The normal voltage at wchich the switch work. |
||
voltageLowThresh | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.6 |
The minimum voltage at which the switch should work. |
||
voltageDescr | 1.3.6.1.4.1.890.1.5.12.43.9.3.1.7 |
Normal indicates that the voltage is within an acceptable operating range at this point; otherwise Error is displayed. |
||
snmpSetup | 1.3.6.1.4.1.890.1.5.12.43.10 | |||
snmpGetCommunity | 1.3.6.1.4.1.890.1.5.12.43.10.1 | |||
snmpSetCommunity | 1.3.6.1.4.1.890.1.5.12.43.10.2 | |||
snmpTrapCommunity | 1.3.6.1.4.1.890.1.5.12.43.10.3 | |||
snmpTrapDestTable | 1.3.6.1.4.1.890.1.5.12.43.10.4 | |||
1.3.6.1.4.1.890.1.5.12.43.10.4.1 |
An entry in snmpTrapDestTable. |
|||
snmpTrapDestIP | 1.3.6.1.4.1.890.1.5.12.43.10.4.1.1 |
IP address of trap destination. |
||
snmpTrapDestRowStatus | 1.3.6.1.4.1.890.1.5.12.43.10.4.1.2 | |||
snmpTrapDestPort | 1.3.6.1.4.1.890.1.5.12.43.10.4.1.3 |
The UDP port of the trap destination. |
||
snmpTrapVersion | 1.3.6.1.4.1.890.1.5.12.43.10.4.1.4 |
The SNMP protocol version to send traps. |
||
snmpTrapUserName | 1.3.6.1.4.1.890.1.5.12.43.10.4.1.5 |
The user name for sending SNMPv3 traps. |
||
snmpTrapGroupTable | 1.3.6.1.4.1.890.1.5.12.43.10.5 | |||
1.3.6.1.4.1.890.1.5.12.43.10.5.1 |
An entry in snmpTrapGroupTable. |
|||
snmpTrapSystemGroup | 1.3.6.1.4.1.890.1.5.12.43.10.5.1.1 | |||
snmpTrapInterfaceGroup | 1.3.6.1.4.1.890.1.5.12.43.10.5.1.2 | |||
snmpTrapAAAGroup | 1.3.6.1.4.1.890.1.5.12.43.10.5.1.3 | |||
snmpTrapSwitchGroup | 1.3.6.1.4.1.890.1.5.12.43.10.5.1.5 | |||
snmpTrapVdslGroup | 1.3.6.1.4.1.890.1.5.12.43.10.5.1.6 | |||
snmpVersion | 1.3.6.1.4.1.890.1.5.12.43.10.6 |
The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c. |
||
snmpUserTable | 1.3.6.1.4.1.890.1.5.12.43.10.7 |
A table that contains SNMPv3 user information. |
||
1.3.6.1.4.1.890.1.5.12.43.10.7.1 |
An entry of snmpUserTable. |
|||
snmpUserName | 1.3.6.1.4.1.890.1.5.12.43.10.7.1.1 |
The user name. |
||
snmpUserSecurityLevel | 1.3.6.1.4.1.890.1.5.12.43.10.7.1.2 |
The level of security at which SNMP messages can be sent or with which operations are being processed. |
||
snmpUserAuthProtocol | 1.3.6.1.4.1.890.1.5.12.43.10.7.1.3 |
The type of authentication protocol to be used. |
||
snmpUserPrivProtocol | 1.3.6.1.4.1.890.1.5.12.43.10.7.1.4 |
The type of privacy protocol to be used. |
||
snmpTrapDestInfoTable | 1.3.6.1.4.1.890.1.5.12.43.10.8 | |||
1.3.6.1.4.1.890.1.5.12.43.10.8.1 |
An entry in snmpTrapDestInfoTable. |
|||
snmpTrapDestInfoIpAddrType | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.1 |
IP address of trap destination. |
||
snmpTrapDestInfoIpAddr | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.2 |
IP address of trap destination. |
||
snmpTrapDestInfoRowStatus | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.3 | |||
snmpTrapDestInfoPort | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.4 |
The UDP port of the trap destination. |
||
snmpTrapDestInfoVersion | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.5 |
The SNMP protocol version to send traps. |
||
snmpTrapDestInfoUserName | 1.3.6.1.4.1.890.1.5.12.43.10.8.1.6 |
The user name for sending SNMPv3 traps. |
||
snmpTrapGroupInfoTable | 1.3.6.1.4.1.890.1.5.12.43.10.9 | |||
1.3.6.1.4.1.890.1.5.12.43.10.9.1 |
An entry in snmpTrapGroupInfoTable. |
|||
snmpTrapGroupInfoSystemGroup | 1.3.6.1.4.1.890.1.5.12.43.10.9.1.1 | |||
snmpTrapGroupInfoInterfaceGroup | 1.3.6.1.4.1.890.1.5.12.43.10.9.1.2 | |||
snmpTrapGroupInfoAAAGroup | 1.3.6.1.4.1.890.1.5.12.43.10.9.1.3 | |||
snmpTrapGroupInfoSwitchGroup | 1.3.6.1.4.1.890.1.5.12.43.10.9.1.5 | |||
snmpTrapGroupInfoVdslGroup | 1.3.6.1.4.1.890.1.5.12.43.10.9.1.6 | |||
dateTimeServerSetup | 1.3.6.1.4.1.890.1.5.12.43.11 | |||
dateTimeServerType | 1.3.6.1.4.1.890.1.5.12.43.11.1 |
The time service protocol. |
||
dateTimeServerIP | 1.3.6.1.4.1.890.1.5.12.43.11.2 |
IP address of time server. |
||
dateTimeZone | 1.3.6.1.4.1.890.1.5.12.43.11.3 |
The time difference between UTC. Ex: +01 |
||
dateTimeNewDateYear | 1.3.6.1.4.1.890.1.5.12.43.11.4 |
The new date in year. |
||
dateTimeNewDateMonth | 1.3.6.1.4.1.890.1.5.12.43.11.5 |
The new date in month. |
||
dateTimeNewDateDay | 1.3.6.1.4.1.890.1.5.12.43.11.6 |
The new date in day. |
||
dateTimeNewTimeHour | 1.3.6.1.4.1.890.1.5.12.43.11.7 |
The new time in hour. |
||
dateTimeNewTimeMinute | 1.3.6.1.4.1.890.1.5.12.43.11.8 |
The new time in minute. |
||
dateTimeNewTimeSecond | 1.3.6.1.4.1.890.1.5.12.43.11.9 |
The new time in second. |
||
dateTimeDaylightSavingTimeSetup | 1.3.6.1.4.1.890.1.5.12.43.11.10 | |||
daylightSavingTimeState | 1.3.6.1.4.1.890.1.5.12.43.11.10.1 |
Daylight saving time service enabled/disabled for the switch. |
||
daylightSavingTimeStartDateWeek | 1.3.6.1.4.1.890.1.5.12.43.11.10.2 |
Daylight saving time service start week. |
||
daylightSavingTimeStartDateDay | 1.3.6.1.4.1.890.1.5.12.43.11.10.3 |
Daylight saving time service start day. |
||
daylightSavingTimeStartDateMonth | 1.3.6.1.4.1.890.1.5.12.43.11.10.4 |
Daylight saving time service start month. |
||
daylightSavingTimeStartDateHour | 1.3.6.1.4.1.890.1.5.12.43.11.10.5 |
Daylight saving time service start time. |
||
daylightSavingTimeEndDateWeek | 1.3.6.1.4.1.890.1.5.12.43.11.10.6 |
Daylight saving time service end week. |
||
daylightSavingTimeEndDateDay | 1.3.6.1.4.1.890.1.5.12.43.11.10.7 |
Daylight saving time service end day. |
||
daylightSavingTimeEndDateMonth | 1.3.6.1.4.1.890.1.5.12.43.11.10.8 |
Daylight saving time service end month. |
||
daylightSavingTimeEndDateHour | 1.3.6.1.4.1.890.1.5.12.43.11.10.9 |
Daylight saving time service end time. |
||
dateTimeServerIPAddrType | 1.3.6.1.4.1.890.1.5.12.43.11.11 |
The address type of dateTimeServerIPAddr. |
||
dateTimeServerIPAddr | 1.3.6.1.4.1.890.1.5.12.43.11.12 |
The IP address of time server. |
||
sysMgmt | 1.3.6.1.4.1.890.1.5.12.43.12 | |||
sysMgmtConfigSave | 1.3.6.1.4.1.890.1.5.12.43.12.1 |
If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one. |
||
sysMgmtBootupConfig | 1.3.6.1.4.1.890.1.5.12.43.12.2 |
The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB. |
||
sysMgmtReboot | 1.3.6.1.4.1.890.1.5.12.43.12.3 |
Reboot switch from SNMP. 1:Reboot, 0:Nothing |
||
sysMgmtDefaultConfig | 1.3.6.1.4.1.890.1.5.12.43.12.4 |
Erase running config and reset to default. |
||
sysMgmtLastActionStatus | 1.3.6.1.4.1.890.1.5.12.43.12.5 |
Display status of last mgmt action. |
||
sysMgmtSystemStatus | 1.3.6.1.4.1.890.1.5.12.43.12.6 |
This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError |
||
sysMgmtCPUUsage | 1.3.6.1.4.1.890.1.5.12.43.12.7 |
Show device CPU load in %, its the snapshot of CPU load when getting the values. |
||
sysMgmtBootupImage | 1.3.6.1.4.1.890.1.5.12.43.12.8 |
The setting value (read index) will be written into non-volatile memory. When rebooting, the selected image will be used. You can change the value of write index by CLI / MIB. |
||
sysMgmtCounterReset | 1.3.6.1.4.1.890.1.5.12.43.12.9 |
Reset all port counters. |
||
sysMgmtTftpServiceSetup | 1.3.6.1.4.1.890.1.5.12.43.12.10 | |||
sysMgmtTftpServerIp | 1.3.6.1.4.1.890.1.5.12.43.12.10.1 |
IP address of TFTP server |
||
sysMgmtTftpRemoteFileName | 1.3.6.1.4.1.890.1.5.12.43.12.10.2 |
The file name that you want to backup to or restore from TFTP server |
||
sysMgmtTftpConfigIndex | 1.3.6.1.4.1.890.1.5.12.43.12.10.3 |
Index of system configuration which you want to restore. |
||
sysMgmtTftpAction | 1.3.6.1.4.1.890.1.5.12.43.12.10.4 |
Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server. |
||
sysMgmtTftpActionStatus | 1.3.6.1.4.1.890.1.5.12.43.12.10.5 |
Display status of mgmt action. |
||
sysMgmtTftpActionErrorInfo | 1.3.6.1.4.1.890.1.5.12.43.12.10.6 |
Display error information of mgmt action. |
||
sysMgmtTftpServerAddressType | 1.3.6.1.4.1.890.1.5.12.43.12.10.7 |
The address type of the sysMgmtTftpServerAddress entry. |
||
sysMgmtTftpServerAddress | 1.3.6.1.4.1.890.1.5.12.43.12.10.8 |
IPv4/IPv6 address of TFTP server |
||
sysMgmtPacketBufferUsage | 1.3.6.1.4.1.890.1.5.12.43.12.12 |
Show device packet buffer usage in %, its the snapshot of packet buffer usage ratio when getting the values. |
||
sysMgmtMemoryUsage | 1.3.6.1.4.1.890.1.5.12.43.12.13 |
Show device memory usage in %, its the snapshot of the device memory usage ratio when getting the values. |
||
sysLoginSetup | 1.3.6.1.4.1.890.1.5.12.43.12.14 | |||
loginLimitMaxNumberOfUser | 1.3.6.1.4.1.890.1.5.12.43.12.14.1 | |||
sysLoginSetupTable | 1.3.6.1.4.1.890.1.5.12.43.12.14.2 | |||
1.3.6.1.4.1.890.1.5.12.43.12.14.2.1 |
An entry in LoginLimitMaxNumberOfUser. |
|||
sysLoginName | 1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.1 | |||
sysLoginPassword | 1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.2 | |||
sysLoginPrivilege | 1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.3 | |||
sysLoginRowStatus | 1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.4 | |||
sysMgmtMacFlush | 1.3.6.1.4.1.890.1.5.12.43.12.16 |
Set 1 to execute mac flush operation, read value will always return 0 |
||
sysMgmtCPUUsageThreshold | 1.3.6.1.4.1.890.1.5.12.43.12.17 |
Set CPU Threshold value |
||
sysMgmtPacketBufferThreshold | 1.3.6.1.4.1.890.1.5.12.43.12.18 |
Set packet buffer usage Threshold value |
||
sysMgmtMemoryUsageThreshold | 1.3.6.1.4.1.890.1.5.12.43.12.19 |
Set memory usage Threshold value |
||
sysMgmtPlusVersion | 1.3.6.1.4.1.890.1.5.12.43.12.20 |
Get Hardware Plus Version |
||
layer2Setup | 1.3.6.1.4.1.890.1.5.12.43.13 | |||
vlanTypeSetup | 1.3.6.1.4.1.890.1.5.12.43.13.1 | |||
igmpSnoopingStateSetup | 1.3.6.1.4.1.890.1.5.12.43.13.2 | |||
tagVlanPortIsolationState | 1.3.6.1.4.1.890.1.5.12.43.13.3 | |||
stpState | 1.3.6.1.4.1.890.1.5.12.43.13.4 | |||
igmpFilteringStateSetup | 1.3.6.1.4.1.890.1.5.12.43.13.5 | |||
unknownMulticastFrameForwarding | 1.3.6.1.4.1.890.1.5.12.43.13.6 | |||
multicastGrpHostTimeout | 1.3.6.1.4.1.890.1.5.12.43.13.7 |
Specify host timeout for all multicast groups when the specific port is in auto mode. |
||
multicastGrpLeaveTimeout | 1.3.6.1.4.1.890.1.5.12.43.13.8 |
Specify leave timeout for all multicast groups. |
||
reservedMulticastFrameForwarding | 1.3.6.1.4.1.890.1.5.12.43.13.9 | |||
igmpsnp8021pPriority | 1.3.6.1.4.1.890.1.5.12.43.13.10 |
Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change) |
||
portBasedVlanPortIsolationState | 1.3.6.1.4.1.890.1.5.12.43.13.11 |
This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members. |
||
igmpsnpVlanMode | 1.3.6.1.4.1.890.1.5.12.43.13.12 | |||
stpMode | 1.3.6.1.4.1.890.1.5.12.43.13.13 | |||
igmpsnpVlanTable | 1.3.6.1.4.1.890.1.5.12.43.13.14 | |||
1.3.6.1.4.1.890.1.5.12.43.13.14.1 |
An entry in IgmpsnpVlanTable. |
|||
igmpsnpVid | 1.3.6.1.4.1.890.1.5.12.43.13.14.1.1 | |||
igmpsnpVlanName | 1.3.6.1.4.1.890.1.5.12.43.13.14.1.2 | |||
igmpsnpVlanRowStatus | 1.3.6.1.4.1.890.1.5.12.43.13.14.1.3 | |||
mgmdMLDsupport | 1.3.6.1.4.1.890.1.5.12.43.13.17 |
Enable MLD / Disable MLD |
||
ipSetup | 1.3.6.1.4.1.890.1.5.12.43.14 | |||
dnsIpAddress | 1.3.6.1.4.1.890.1.5.12.43.14.1 | |||
defaultMgmt | 1.3.6.1.4.1.890.1.5.12.43.14.2 | |||
inbandIpSetup | 1.3.6.1.4.1.890.1.5.12.43.14.3 | |||
inbandIpType | 1.3.6.1.4.1.890.1.5.12.43.14.3.1 | |||
inbandVid | 1.3.6.1.4.1.890.1.5.12.43.14.3.2 | |||
inbandStaticIp | 1.3.6.1.4.1.890.1.5.12.43.14.3.3 | |||
inbandStaticSubnetMask | 1.3.6.1.4.1.890.1.5.12.43.14.3.4 | |||
inbandStaticGateway | 1.3.6.1.4.1.890.1.5.12.43.14.3.5 | |||
outOfBandIpSetup | 1.3.6.1.4.1.890.1.5.12.43.14.4 | |||
outOfBandIp | 1.3.6.1.4.1.890.1.5.12.43.14.4.1 | |||
outOfBandSubnetMask | 1.3.6.1.4.1.890.1.5.12.43.14.4.2 | |||
outOfBandGateway | 1.3.6.1.4.1.890.1.5.12.43.14.4.3 | |||
maxNumOfInbandIp | 1.3.6.1.4.1.890.1.5.12.43.14.5 | |||
inbandIpTable | 1.3.6.1.4.1.890.1.5.12.43.14.6 | |||
1.3.6.1.4.1.890.1.5.12.43.14.6.1 |
An entry in inbandIpTable. |
|||
inbandEntryIp | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.1 | |||
inbandEntrySubnetMask | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.2 | |||
inbandEntryGateway | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.3 | |||
inbandEntryVid | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.4 | |||
inbandEntryManageable | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.5 | |||
inbandEntryRowStatus | 1.3.6.1.4.1.890.1.5.12.43.14.6.1.6 | |||
filterSetup | 1.3.6.1.4.1.890.1.5.12.43.15 | |||
filterTable | 1.3.6.1.4.1.890.1.5.12.43.15.1 | |||
1.3.6.1.4.1.890.1.5.12.43.15.1.1 |
An entry in filterTable. |
|||
filterName | 1.3.6.1.4.1.890.1.5.12.43.15.1.1.1 | |||
filterActionState | 1.3.6.1.4.1.890.1.5.12.43.15.1.1.2 | |||
filterMacAddr | 1.3.6.1.4.1.890.1.5.12.43.15.1.1.3 | |||
filterVid | 1.3.6.1.4.1.890.1.5.12.43.15.1.1.4 | |||
filterRowStatus | 1.3.6.1.4.1.890.1.5.12.43.15.1.1.5 | |||
mirrorSetup | 1.3.6.1.4.1.890.1.5.12.43.16 | |||
mirrorState | 1.3.6.1.4.1.890.1.5.12.43.16.1 | |||
mirrorMonitorPort | 1.3.6.1.4.1.890.1.5.12.43.16.2 | |||
mirrorTable | 1.3.6.1.4.1.890.1.5.12.43.16.3 | |||
1.3.6.1.4.1.890.1.5.12.43.16.3.1 |
An entry in mirrorTable. |
|||
mirrorMirroredState | 1.3.6.1.4.1.890.1.5.12.43.16.3.1.1 | |||
mirrorDirection | 1.3.6.1.4.1.890.1.5.12.43.16.3.1.2 | |||
mirrorRspanVid | 1.3.6.1.4.1.890.1.5.12.43.16.7 | |||
aggrSetup | 1.3.6.1.4.1.890.1.5.12.43.17 | |||
aggrState | 1.3.6.1.4.1.890.1.5.12.43.17.1 | |||
aggrSystemPriority | 1.3.6.1.4.1.890.1.5.12.43.17.2 | |||
aggrGroupTable | 1.3.6.1.4.1.890.1.5.12.43.17.3 | |||
1.3.6.1.4.1.890.1.5.12.43.17.3.1 |
An entry in aggrGroupTable. |
|||
aggrGroupIndex | 1.3.6.1.4.1.890.1.5.12.43.17.3.1.1 | |||
aggrGroupState | 1.3.6.1.4.1.890.1.5.12.43.17.3.1.2 | |||
aggrGroupDynamicState | 1.3.6.1.4.1.890.1.5.12.43.17.3.1.3 | |||
aggrPortTable | 1.3.6.1.4.1.890.1.5.12.43.17.4 | |||
1.3.6.1.4.1.890.1.5.12.43.17.4.1 |
An entry in aggrPortTable. |
|||
aggrPortGroup | 1.3.6.1.4.1.890.1.5.12.43.17.4.1.1 | |||
aggrPortDynamicStateTimeout | 1.3.6.1.4.1.890.1.5.12.43.17.4.1.2 | |||
accessCtlSetup | 1.3.6.1.4.1.890.1.5.12.43.18 | |||
accessCtlTable | 1.3.6.1.4.1.890.1.5.12.43.18.1 | |||
1.3.6.1.4.1.890.1.5.12.43.18.1.1 |
An entry in accessCtlTable. |
|||
accessCtlService | 1.3.6.1.4.1.890.1.5.12.43.18.1.1.1 | |||
accessCtlEnable | 1.3.6.1.4.1.890.1.5.12.43.18.1.1.2 | |||
accessCtlServicePort | 1.3.6.1.4.1.890.1.5.12.43.18.1.1.3 | |||
accessCtlTimeout | 1.3.6.1.4.1.890.1.5.12.43.18.1.1.4 | |||
securedClientTable | 1.3.6.1.4.1.890.1.5.12.43.18.2 | |||
1.3.6.1.4.1.890.1.5.12.43.18.2.1 |
An entry in securedClientTable. |
|||
securedClientIndex | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.1 | |||
securedClientEnable | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.2 | |||
securedClientStartIp | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.3 |
IPv4 only |
||
securedClientEndIp | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.4 |
IPv4 only |
||
securedClientService | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.5 | |||
securedClientIpAddrType | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.6 | |||
securedClientStartIpAddr | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.7 | |||
securedClientEndIpAddr | 1.3.6.1.4.1.890.1.5.12.43.18.2.1.8 | |||
queuingMethodSetup | 1.3.6.1.4.1.890.1.5.12.43.19 | |||
queuingMethodType | 1.3.6.1.4.1.890.1.5.12.43.19.1 | |||
portQueuingMethodTable | 1.3.6.1.4.1.890.1.5.12.43.19.2 | |||
1.3.6.1.4.1.890.1.5.12.43.19.2.1 |
An entry in portQueuingMethodTable. |
|||
portQueuingMethodQueue | 1.3.6.1.4.1.890.1.5.12.43.19.2.1.1 |
0...7 |
||
portQueuingMethodWeight | 1.3.6.1.4.1.890.1.5.12.43.19.2.1.2 |
0...15 |
||
queuingMethodFeSpq | 1.3.6.1.4.1.890.1.5.12.43.19.3 |
VDSL port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ. |
||
portQueuingMethodGeSpqTable | 1.3.6.1.4.1.890.1.5.12.43.19.4 | |||
1.3.6.1.4.1.890.1.5.12.43.19.4.1 |
An entry in portQueuingMethodGeSpqTable. |
|||
portQueuingMethodGeSpq | 1.3.6.1.4.1.890.1.5.12.43.19.4.1.1 |
GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ. |
||
dhcpSetup | 1.3.6.1.4.1.890.1.5.12.43.20 | |||
globalDhcpRelay | 1.3.6.1.4.1.890.1.5.12.43.20.1 | |||
globalDhcpRelayEnable | 1.3.6.1.4.1.890.1.5.12.43.20.1.1 | |||
globalDhcpRelayOption82Enable | 1.3.6.1.4.1.890.1.5.12.43.20.1.2 | |||
globalDhcpRelayInfoData | 1.3.6.1.4.1.890.1.5.12.43.20.1.4 | |||
maxNumberOfGlobalDhcpRelayRemoteServer | 1.3.6.1.4.1.890.1.5.12.43.20.1.5 | |||
globalDhcpRelayRemoteServerTable | 1.3.6.1.4.1.890.1.5.12.43.20.1.6 | |||
1.3.6.1.4.1.890.1.5.12.43.20.1.6.1 |
An entry in globalDhcpRelayRemoteServerTable. |
|||
globalDhcpRelayRemoteServerIp | 1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.1 | |||
globalDhcpRelayRemoteServerRowStatus | 1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.2 | |||
globalDhcpRelayRemoteIDEnable | 1.3.6.1.4.1.890.1.5.12.43.20.1.7 | |||
globalDhcpRelayRemoteIDData | 1.3.6.1.4.1.890.1.5.12.43.20.1.8 | |||
globalDhcpRelayInfoType | 1.3.6.1.4.1.890.1.5.12.43.20.1.9 | |||
globalDhcpRelayRemoteIDType | 1.3.6.1.4.1.890.1.5.12.43.20.1.10 | |||
dhcpRelay | 1.3.6.1.4.1.890.1.5.12.43.20.3 | |||
maxNumberOfDhcpRelay | 1.3.6.1.4.1.890.1.5.12.43.20.3.1 |
The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay. |
||
maxNumberOfDhcpRelayRemoteServer | 1.3.6.1.4.1.890.1.5.12.43.20.3.2 | |||
dhcpRelayTable | 1.3.6.1.4.1.890.1.5.12.43.20.3.3 | |||
1.3.6.1.4.1.890.1.5.12.43.20.3.3.1 |
An entry in dhcpRelayTable. |
|||
dhcpRelayOption82Enable | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.1 | |||
dhcpRelayInfoData | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.3 | |||
dhcpRelayRemoteIDEnable | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.4 | |||
dhcpRelayRemoteIDData | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.5 | |||
dhcpRelayInfoType | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.6 | |||
dhcpRelayRemoteIDType | 1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.7 | |||
dhcpRelayRemoteServerTable | 1.3.6.1.4.1.890.1.5.12.43.20.3.4 | |||
1.3.6.1.4.1.890.1.5.12.43.20.3.4.1 |
An entry in dhcpRelayRemoteServerTable. |
|||
dhcpRelayVid | 1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.1 | |||
dhcpRelayRemoteServerIp | 1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.2 | |||
dhcpRelayRemoteServerRowStatus | 1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.3 | |||
staticRouteSetup | 1.3.6.1.4.1.890.1.5.12.43.21 | |||
maxNumberOfStaticRoutes | 1.3.6.1.4.1.890.1.5.12.43.21.1 | |||
staticRouteTable | 1.3.6.1.4.1.890.1.5.12.43.21.2 | |||
1.3.6.1.4.1.890.1.5.12.43.21.2.1 |
An entry in staticRouteTable. |
|||
staticRouteName | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.1 | |||
staticRouteIp | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.2 | |||
staticRouteMask | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.3 | |||
staticRouteGateway | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.4 | |||
staticRouteMetric | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.5 | |||
staticRouteRowStatus | 1.3.6.1.4.1.890.1.5.12.43.21.2.1.6 | |||
arpInfo | 1.3.6.1.4.1.890.1.5.12.43.22 | |||
arpTable | 1.3.6.1.4.1.890.1.5.12.43.22.1 | |||
1.3.6.1.4.1.890.1.5.12.43.22.1.1 |
An entry in arpTable. |
|||
arpIndex | 1.3.6.1.4.1.890.1.5.12.43.22.1.1.1 | |||
arpIpAddr | 1.3.6.1.4.1.890.1.5.12.43.22.1.1.2 | |||
arpMacAddr | 1.3.6.1.4.1.890.1.5.12.43.22.1.1.3 | |||
arpMacVid | 1.3.6.1.4.1.890.1.5.12.43.22.1.1.4 | |||
arpType | 1.3.6.1.4.1.890.1.5.12.43.22.1.1.5 |
1-static, 2-dynamic |
||
portOpModeSetup | 1.3.6.1.4.1.890.1.5.12.43.24 | |||
portOpModePortTable | 1.3.6.1.4.1.890.1.5.12.43.24.1 | |||
1.3.6.1.4.1.890.1.5.12.43.24.1.1 |
An entry in portOpModePortTable. |
|||
portOpModePortSpeedDuplex | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.1 | |||
portOpModePortFlowCntl | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.2 | |||
portOpModePortName | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.3 | |||
portOpModePortModuleType | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.4 | |||
portOpModePortLinkUpType | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.5 | |||
portOpModePortIntrusionLock | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.6 | |||
portOpModePortLBTestSetup | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.7 |
This entry display latest loopback test status of port while performing loopback test. |
||
portOpModePortLBTestStatus | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.8 |
This entry display latest loopback test status of port while performing loopback test. |
||
portOpModePortSwCounterReset | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.9 |
This entry resets port SW counter. |
||
portOpModePortVdslCounterReset | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.10 |
This entry resets port VDSL counter. |
||
portOpModePortVdslStatus | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.11 |
This entry reports VDSL link current status. |
||
portOpModePortVdslUptime | 1.3.6.1.4.1.890.1.5.12.43.24.1.1.12 |
This entry reports VDSL link current link up time. |
||
portOpModePortLBTable | 1.3.6.1.4.1.890.1.5.12.43.24.2 | |||
1.3.6.1.4.1.890.1.5.12.43.24.2.1 |
An entry in portOpModePortLBTable. |
|||
portOpModePortLBActive | 1.3.6.1.4.1.890.1.5.12.43.24.2.1.1 | |||
portOpModePortLBNumber | 1.3.6.1.4.1.890.1.5.12.43.24.2.1.2 | |||
portOpModePortLBCount | 1.3.6.1.4.1.890.1.5.12.43.24.2.1.3 | |||
portOpModePortLBPktSize | 1.3.6.1.4.1.890.1.5.12.43.24.2.1.4 |
Packet size range from 64 bytes to 1518 bytes |
||
portOpModePortLBResultTable | 1.3.6.1.4.1.890.1.5.12.43.24.3 | |||
1.3.6.1.4.1.890.1.5.12.43.24.3.1 |
An entry in portOpModePortLBResultTable. |
|||
portOpModePortLBMaxRTT | 1.3.6.1.4.1.890.1.5.12.43.24.3.1.1 | |||
portOpModePortLBMinRTT | 1.3.6.1.4.1.890.1.5.12.43.24.3.1.2 | |||
portOpModePortLBAvgRTT | 1.3.6.1.4.1.890.1.5.12.43.24.3.1.3 | |||
portOpModePortLBPktLossRate | 1.3.6.1.4.1.890.1.5.12.43.24.3.1.4 |
Loopback Packet loss rate |
||
portOpModePortLBStatus | 1.3.6.1.4.1.890.1.5.12.43.24.3.1.5 | |||
portBasedVlanSetup | 1.3.6.1.4.1.890.1.5.12.43.25 | |||
portBasedVlanPortListTable | 1.3.6.1.4.1.890.1.5.12.43.25.1 | |||
1.3.6.1.4.1.890.1.5.12.43.25.1.1 |
An entry in portBasedVlanPortListTable. |
|||
portBasedVlanPortListMembers | 1.3.6.1.4.1.890.1.5.12.43.25.1.1.1 | |||
faultMIB | 1.3.6.1.4.1.890.1.5.12.43.26 | |||
eventObjects | 1.3.6.1.4.1.890.1.5.12.43.26.1 | |||
eventTable | 1.3.6.1.4.1.890.1.5.12.43.26.1.1 |
A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table. |
||
1.3.6.1.4.1.890.1.5.12.43.26.1.1.1 |
An entry containing information about an event in the event table. |
|||
eventSeqNum | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.1 |
This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing). |
||
eventEventId | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.2 |
This variable represents the event ID which uniquely identifies the event in the entire system. |
||
eventName | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.3 |
This variable represents the name of the event, for example Ethernet Link Down |
||
eventInstanceType | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.4 |
This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName |
||
eventInstanceId | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.5 |
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example 1 for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType |
||
eventInstanceName | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.6 |
This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType |
||
eventSeverity | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.7 |
This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated. |
||
eventSetTime | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.8 |
This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
||
eventDescription | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.9 |
This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters. |
||
eventServAffective | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.10 |
This variable indicates whether the event is service affective or not |
||
eventInstanceIdNumber | 1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.11 |
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example 1 for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType |
||
faultTrapsMIB | 1.3.6.1.4.1.890.1.5.12.43.27 | |||
trapInfoObjects | 1.3.6.1.4.1.890.1.5.12.43.27.1 | |||
trapRefSeqNum | 1.3.6.1.4.1.890.1.5.12.43.27.1.1 |
Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
||
trapPersistence | 1.3.6.1.4.1.890.1.5.12.43.27.1.2 |
Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications. |
||
trapSenderNodeId | 1.3.6.1.4.1.890.1.5.12.43.27.1.3 |
Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
||
trapSenderStatus | 1.3.6.1.4.1.890.1.5.12.43.27.1.4 |
Represents the trap status. 0 means cleared, 1 means happened. |
||
trapNotifications | 1.3.6.1.4.1.890.1.5.12.43.27.2 | |||
multicastPortSetup | 1.3.6.1.4.1.890.1.5.12.43.28 | |||
multicastPortTable | 1.3.6.1.4.1.890.1.5.12.43.28.1 | |||
1.3.6.1.4.1.890.1.5.12.43.28.1.1 |
An entry in multicastPortTable. |
|||
multicastPortImmediateLeave | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.1 | |||
multicastPortMaxGroupLimited | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.2 | |||
multicastPortMaxOfGroup | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.3 |
0..255 |
||
multicastPortIgmpFilteringProfile | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.4 | |||
multicastPortQueryMode | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.5 |
Specify query mode for each port |
||
igmpMsgMaxLimited | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.6 | |||
igmpMsgLimit | 1.3.6.1.4.1.890.1.5.12.43.28.1.1.7 |
0..255 |
||
multicastStatus | 1.3.6.1.4.1.890.1.5.12.43.29 | |||
multicastStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.1 | |||
1.3.6.1.4.1.890.1.5.12.43.29.1.1 |
An entry in multicastStatusTable. |
|||
multicastStatusIndex | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.1 | |||
multicastStatusVlanID | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.2 | |||
multicastStatusPort | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.3 | |||
multicastStatusGroup | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.4 | |||
multicastStatusJoinCounter | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.5 | |||
multicastStatusLeaveCounter | 1.3.6.1.4.1.890.1.5.12.43.29.1.1.6 | |||
igmpCountTable | 1.3.6.1.4.1.890.1.5.12.43.29.2 |
A count table of igmp query/report/leave message. |
||
1.3.6.1.4.1.890.1.5.12.43.29.2.1 |
An entry in igmpCountTable. |
|||
igmpCountIndex | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.1 |
Index of IgmpCountEntry. 0 means total count in whole system |
||
igmpCountInQuery | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.2 | |||
igmpCountInReport | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.3 | |||
igmpCountInLeave | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.4 | |||
igmpCountInQueryDrop | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.5 | |||
igmpCountInReportDrop | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.6 | |||
igmpCountInLeaveDrop | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.7 | |||
igmpCountOutQuery | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.8 | |||
igmpCountOutReport | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.9 | |||
igmpCountOutLeave | 1.3.6.1.4.1.890.1.5.12.43.29.2.1.10 | |||
multicastVlanStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.3 | |||
1.3.6.1.4.1.890.1.5.12.43.29.3.1 |
An entry in multicastVlanStatusTable. |
|||
multicastVlanStatusVlanID | 1.3.6.1.4.1.890.1.5.12.43.29.3.1.1 | |||
multicastVlanStatusType | 1.3.6.1.4.1.890.1.5.12.43.29.3.1.2 | |||
multicastVlanQueryPort | 1.3.6.1.4.1.890.1.5.12.43.29.3.1.3 | |||
multicastVlanQuerySrcIp | 1.3.6.1.4.1.890.1.5.12.43.29.3.1.4 | |||
igmpCounterPortTable | 1.3.6.1.4.1.890.1.5.12.43.29.4 | |||
1.3.6.1.4.1.890.1.5.12.43.29.4.1 |
An entry in igmpCounterPortTable. |
|||
igmpCounterPortJoin | 1.3.6.1.4.1.890.1.5.12.43.29.4.1.1 |
Join counter for the port. |
||
igmpCounterPortLeave | 1.3.6.1.4.1.890.1.5.12.43.29.4.1.2 |
Leave counter for the port. |
||
igmpCounterPortActiveGroup | 1.3.6.1.4.1.890.1.5.12.43.29.4.1.3 |
Current active group for the port |
||
igmpCounterPortQuery | 1.3.6.1.4.1.890.1.5.12.43.29.4.1.4 |
Query counter for the port. |
||
igmpCounterVlanTable | 1.3.6.1.4.1.890.1.5.12.43.29.5 | |||
1.3.6.1.4.1.890.1.5.12.43.29.5.1 |
An entry in igmpCounterVlanTable. |
|||
igmpCounterVlanJoin | 1.3.6.1.4.1.890.1.5.12.43.29.5.1.1 |
Join counter for the Vlan. |
||
igmpCounterVlanLeave | 1.3.6.1.4.1.890.1.5.12.43.29.5.1.2 |
Leave counter for the Vlan. |
||
igmpCounterVlanActiveGroup | 1.3.6.1.4.1.890.1.5.12.43.29.5.1.3 |
Current active group for the Vlan |
||
igmpCounterVlanQuery | 1.3.6.1.4.1.890.1.5.12.43.29.5.1.4 |
Query counter for the Vlan. |
||
multicastCurrentGroupStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.6 | |||
1.3.6.1.4.1.890.1.5.12.43.29.6.1 |
An entry in multicastCurrentGroupStatusTable. |
|||
multicastCurrentNumberOfActivePort | 1.3.6.1.4.1.890.1.5.12.43.29.6.1.1 |
Current number Of active port. |
||
multicastClientSrcIpTable | 1.3.6.1.4.1.890.1.5.12.43.29.7 | |||
1.3.6.1.4.1.890.1.5.12.43.29.7.1 |
An entry in multicastClientSrcIpTable. |
|||
multicastClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.12.43.29.7.1.1 | |||
multicastClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.12.43.29.7.1.2 | |||
mgmdStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.8 | |||
1.3.6.1.4.1.890.1.5.12.43.29.8.1 |
An entry in mgmdStatusTable. |
|||
mgmdStatusIndex | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.1 | |||
mgmdStatusVlanID | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.2 | |||
mgmdStatusPort | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.3 | |||
mgmdStatusGroupAddressType | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.4 |
The address type of the mgmdStatusGroupAddress entry. |
||
mgmdStatusGroupAddress | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.5 | |||
mgmdStatusGroupFilterMode | 1.3.6.1.4.1.890.1.5.12.43.29.8.1.6 |
The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
||
mgmdCountTable | 1.3.6.1.4.1.890.1.5.12.43.29.9 |
A count table of igmp/MLD query/report/leave message. |
||
1.3.6.1.4.1.890.1.5.12.43.29.9.1 |
An entry in mgmdCountTable. |
|||
mgmdCountIndex | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.1 |
Index of mgmdCountEntry. 0 means total count in whole system |
||
mgmdCountInQuery | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.2 | |||
mgmdCountInReport | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.3 | |||
mgmdCountInLeave | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.4 | |||
mgmdCountInQueryDrop | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.5 | |||
mgmdCountInReportDrop | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.6 | |||
mgmdCountInLeaveDrop | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.7 | |||
mgmdCountOutQuery | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.8 | |||
mgmdCountOutReport | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.9 | |||
mgmdCountOutLeave | 1.3.6.1.4.1.890.1.5.12.43.29.9.1.10 | |||
mgmdVlanStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.10 | |||
1.3.6.1.4.1.890.1.5.12.43.29.10.1 |
An entry in mgmdVlanStatusTable. |
|||
mgmdVlanStatusVlanID | 1.3.6.1.4.1.890.1.5.12.43.29.10.1.1 | |||
mgmdVlanStatusType | 1.3.6.1.4.1.890.1.5.12.43.29.10.1.2 | |||
mgmdVlanQueryPort | 1.3.6.1.4.1.890.1.5.12.43.29.10.1.3 | |||
mgmdVlanQuerySrcIpType | 1.3.6.1.4.1.890.1.5.12.43.29.10.1.4 |
The address type of the mgmdVlanQuerySrcIp entry. |
||
mgmdVlanQuerySrcIp | 1.3.6.1.4.1.890.1.5.12.43.29.10.1.5 | |||
mgmdCounterPortTable | 1.3.6.1.4.1.890.1.5.12.43.29.11 | |||
1.3.6.1.4.1.890.1.5.12.43.29.11.1 |
An entry in mgmdCounterPortTable. |
|||
mgmdCounterPortReport | 1.3.6.1.4.1.890.1.5.12.43.29.11.1.1 |
Report counter for the port. |
||
mgmdCounterPortLeave | 1.3.6.1.4.1.890.1.5.12.43.29.11.1.2 |
Leave counter for the port. |
||
mgmdCounterPortActiveGroup | 1.3.6.1.4.1.890.1.5.12.43.29.11.1.3 |
Current active group for the port |
||
mgmdCounterPortQuery | 1.3.6.1.4.1.890.1.5.12.43.29.11.1.4 |
Query counter for the port. |
||
mgmdCounterVlanTable | 1.3.6.1.4.1.890.1.5.12.43.29.12 | |||
1.3.6.1.4.1.890.1.5.12.43.29.12.1 |
An entry in mgmdCounterVlanTable. |
|||
mgmdCounterVlanReport | 1.3.6.1.4.1.890.1.5.12.43.29.12.1.1 |
Report counter for the Vlan. |
||
mgmdCounterVlanLeave | 1.3.6.1.4.1.890.1.5.12.43.29.12.1.2 |
Leave counter for the Vlan. |
||
mgmdCounterVlanActiveGroup | 1.3.6.1.4.1.890.1.5.12.43.29.12.1.3 |
Current active group for the Vlan |
||
mgmdCounterVlanQuery | 1.3.6.1.4.1.890.1.5.12.43.29.12.1.4 |
Query counter for the Vlan. |
||
mgmdCurrentGroupStatusTable | 1.3.6.1.4.1.890.1.5.12.43.29.13 | |||
1.3.6.1.4.1.890.1.5.12.43.29.13.1 |
An entry in mgmdCurrentGroupStatusTable. |
|||
mgmdCurrentNumberOfActivePort | 1.3.6.1.4.1.890.1.5.12.43.29.13.1.1 |
Current number Of active port. |
||
mgmdClientSrcIpTable | 1.3.6.1.4.1.890.1.5.12.43.29.14 | |||
1.3.6.1.4.1.890.1.5.12.43.29.14.1 |
An entry in mgmdClientSrcIpTable. |
|||
mgmdClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.12.43.29.14.1.1 | |||
mgmdClientSrcIpAddressType | 1.3.6.1.4.1.890.1.5.12.43.29.14.1.2 | |||
mgmdClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.12.43.29.14.1.3 | |||
mgmdSrcListTable | 1.3.6.1.4.1.890.1.5.12.43.29.15 |
The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a host. |
||
1.3.6.1.4.1.890.1.5.12.43.29.15.1 |
An entry (conceptual row) in the mgmdSrcListTable. |
|||
mgmdSrcListAddressType | 1.3.6.1.4.1.890.1.5.12.43.29.15.1.1 |
The address type of the InetAddress variables in this table. This value applies to the mgmdStatusGroupAddress and mgmdSrcListAddress entries. |
||
mgmdSrcListAddress | 1.3.6.1.4.1.890.1.5.12.43.29.15.1.2 |
The IP multicast group address for which this entry contains information. |
||
igmpFilteringProfileSetup | 1.3.6.1.4.1.890.1.5.12.43.30 | |||
igmpFilteringMaxNumberOfProfile | 1.3.6.1.4.1.890.1.5.12.43.30.1 | |||
igmpFilteringProfileTable | 1.3.6.1.4.1.890.1.5.12.43.30.2 | |||
1.3.6.1.4.1.890.1.5.12.43.30.2.1 |
An entry in igmpFilteringProfileTable. |
|||
igmpFilteringProfileName | 1.3.6.1.4.1.890.1.5.12.43.30.2.1.1 | |||
igmpFilteringProfileStartAddress | 1.3.6.1.4.1.890.1.5.12.43.30.2.1.2 | |||
igmpFilteringProfileEndAddress | 1.3.6.1.4.1.890.1.5.12.43.30.2.1.3 | |||
igmpFilteringProfileRowStatus | 1.3.6.1.4.1.890.1.5.12.43.30.2.1.4 | |||
mgmdFilterProfileTable | 1.3.6.1.4.1.890.1.5.12.43.30.3 | |||
1.3.6.1.4.1.890.1.5.12.43.30.3.1 |
An entry in mgmdFilterProfileTable.For v4 and v6 address |
|||
mgmdFilterProfileName | 1.3.6.1.4.1.890.1.5.12.43.30.3.1.1 | |||
mgmdFilterProfileAddressType | 1.3.6.1.4.1.890.1.5.12.43.30.3.1.2 |
The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined in the InetAddress MIB. |
||
mgmdFilterProfileStartAddress | 1.3.6.1.4.1.890.1.5.12.43.30.3.1.3 |
The Start IP address of this profile. |
||
mgmdFilterProfileEndAddress | 1.3.6.1.4.1.890.1.5.12.43.30.3.1.4 |
The End IP address of this profile. |
||
mgmdFilterProfileRowStatus | 1.3.6.1.4.1.890.1.5.12.43.30.3.1.5 | |||
mvrSetup | 1.3.6.1.4.1.890.1.5.12.43.31 | |||
maxNumberOfMVR | 1.3.6.1.4.1.890.1.5.12.43.31.1 | |||
mvrTable | 1.3.6.1.4.1.890.1.5.12.43.31.2 | |||
1.3.6.1.4.1.890.1.5.12.43.31.2.1 |
An entry in mvrTable. |
|||
mvrVlanID | 1.3.6.1.4.1.890.1.5.12.43.31.2.1.1 |
1..4094 |
||
mvrName | 1.3.6.1.4.1.890.1.5.12.43.31.2.1.2 | |||
mvrMode | 1.3.6.1.4.1.890.1.5.12.43.31.2.1.3 | |||
mvrRowStatus | 1.3.6.1.4.1.890.1.5.12.43.31.2.1.4 | |||
mvr8021pPriority | 1.3.6.1.4.1.890.1.5.12.43.31.2.1.5 |
Set the 802.1p priority of control messages within MVR (0~7) |
||
mvrPortTable | 1.3.6.1.4.1.890.1.5.12.43.31.3 | |||
1.3.6.1.4.1.890.1.5.12.43.31.3.1 |
An entry in mvrPortTable. |
|||
mvrPortRole | 1.3.6.1.4.1.890.1.5.12.43.31.3.1.1 | |||
mvrPortTagging | 1.3.6.1.4.1.890.1.5.12.43.31.3.1.2 | |||
maxNumberOfMvrGroup | 1.3.6.1.4.1.890.1.5.12.43.31.4 | |||
mvrGroupTable | 1.3.6.1.4.1.890.1.5.12.43.31.5 | |||
1.3.6.1.4.1.890.1.5.12.43.31.5.1 |
An entry in mvrGroupTable. |
|||
mvrGroupName | 1.3.6.1.4.1.890.1.5.12.43.31.5.1.1 | |||
mvrGroupStartAddress | 1.3.6.1.4.1.890.1.5.12.43.31.5.1.2 | |||
mvrGroupEndAddress | 1.3.6.1.4.1.890.1.5.12.43.31.5.1.3 | |||
mvrGroupRowStatus | 1.3.6.1.4.1.890.1.5.12.43.31.5.1.4 | |||
mvrBehavior | 1.3.6.1.4.1.890.1.5.12.43.31.6 | |||
mvrMgmdGroupTable | 1.3.6.1.4.1.890.1.5.12.43.31.7 | |||
1.3.6.1.4.1.890.1.5.12.43.31.7.1 |
An entry in mvrMgmdGroupTable. |
|||
mvrMgmdGroupName | 1.3.6.1.4.1.890.1.5.12.43.31.7.1.1 | |||
mvrMgmdGroupAddressType | 1.3.6.1.4.1.890.1.5.12.43.31.7.1.2 | |||
mvrMgmdGroupStartAddress | 1.3.6.1.4.1.890.1.5.12.43.31.7.1.3 | |||
mvrMgmdGroupEndAddress | 1.3.6.1.4.1.890.1.5.12.43.31.7.1.4 | |||
mvrMgmdGroupRowStatus | 1.3.6.1.4.1.890.1.5.12.43.31.7.1.5 | |||
sysLogSetup | 1.3.6.1.4.1.890.1.5.12.43.33 | |||
sysLogState | 1.3.6.1.4.1.890.1.5.12.43.33.1 |
sysLog enabled/disabled for the switch. |
||
sysLogTypeTable | 1.3.6.1.4.1.890.1.5.12.43.33.2 | |||
1.3.6.1.4.1.890.1.5.12.43.33.2.1 |
An entry in sysLogTypeTable. |
|||
sysLogTypeIndex | 1.3.6.1.4.1.890.1.5.12.43.33.2.1.1 | |||
sysLogTypeName | 1.3.6.1.4.1.890.1.5.12.43.33.2.1.2 | |||
sysLogTypeState | 1.3.6.1.4.1.890.1.5.12.43.33.2.1.3 | |||
sysLogTypeFacility | 1.3.6.1.4.1.890.1.5.12.43.33.2.1.4 | |||
sysLogServerTable | 1.3.6.1.4.1.890.1.5.12.43.33.3 | |||
1.3.6.1.4.1.890.1.5.12.43.33.3.1 |
An entry in sysLogServerTable. |
|||
sysLogServerAddress | 1.3.6.1.4.1.890.1.5.12.43.33.3.1.1 | |||
sysLogServerLogLevel | 1.3.6.1.4.1.890.1.5.12.43.33.3.1.2 | |||
sysLogServerRowStatus | 1.3.6.1.4.1.890.1.5.12.43.33.3.1.3 | |||
sysLogServerInfoTable | 1.3.6.1.4.1.890.1.5.12.43.33.4 | |||
1.3.6.1.4.1.890.1.5.12.43.33.4.1 |
An entry in sysLogServerInfoTable. |
|||
sysLogServerInfoIpAddrType | 1.3.6.1.4.1.890.1.5.12.43.33.4.1.1 | |||
sysLogServerInfoIpAddr | 1.3.6.1.4.1.890.1.5.12.43.33.4.1.2 | |||
sysLogServerInfoLogLevel | 1.3.6.1.4.1.890.1.5.12.43.33.4.1.3 | |||
sysLogServerInfoRowStatus | 1.3.6.1.4.1.890.1.5.12.43.33.4.1.4 | |||
diffservSetup | 1.3.6.1.4.1.890.1.5.12.43.34 | |||
diffservState | 1.3.6.1.4.1.890.1.5.12.43.34.1 | |||
diffservMapTable | 1.3.6.1.4.1.890.1.5.12.43.34.2 | |||
1.3.6.1.4.1.890.1.5.12.43.34.2.1 |
An entry in diffservMapTable. |
|||
diffservMapDscp | 1.3.6.1.4.1.890.1.5.12.43.34.2.1.1 |
0-63 |
||
diffservMapPriority | 1.3.6.1.4.1.890.1.5.12.43.34.2.1.2 |
0-7 |
||
diffservPortTable | 1.3.6.1.4.1.890.1.5.12.43.34.3 | |||
1.3.6.1.4.1.890.1.5.12.43.34.3.1 |
An entry in diffservPortTable. |
|||
diffservPortState | 1.3.6.1.4.1.890.1.5.12.43.34.3.1.1 | |||
vturInfo | 1.3.6.1.4.1.890.1.5.12.43.37 | |||
vturInfoTable | 1.3.6.1.4.1.890.1.5.12.43.37.1 | |||
1.3.6.1.4.1.890.1.5.12.43.37.1.1 |
An entry in vturInfoTable. |
|||
vturName | 1.3.6.1.4.1.890.1.5.12.43.37.1.1.1 |
Display remote device name |
||
vturSysVersion | 1.3.6.1.4.1.890.1.5.12.43.37.1.1.2 |
Display remote device system version info |
||
vturModemCodeVersion | 1.3.6.1.4.1.890.1.5.12.43.37.1.1.3 |
Display remote device VDSL modem code version info |
||
protoBasedVlanSetup | 1.3.6.1.4.1.890.1.5.12.43.38 | |||
protoBasedVlanTable | 1.3.6.1.4.1.890.1.5.12.43.38.1 | |||
1.3.6.1.4.1.890.1.5.12.43.38.1.1 |
An entry in protoBasedVlanTable. |
|||
protoBasedVlanPort | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.1 | |||
protoBasedVlanPacketType | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.2 | |||
protoBasedVlanEtherType | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.3 | |||
protoBasedVlanName | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.4 | |||
protoBasedVlanVid | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.5 | |||
protoBasedVlanPriority | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.6 | |||
protoBasedVlanState | 1.3.6.1.4.1.890.1.5.12.43.38.1.1.7 | |||
classifierSetup | 1.3.6.1.4.1.890.1.5.12.43.39 | |||
classifierRuleTable | 1.3.6.1.4.1.890.1.5.12.43.39.1 | |||
1.3.6.1.4.1.890.1.5.12.43.39.1.1 |
An entry in classifierRuleTable. |
|||
classifierName | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.1 |
Name of classifier rule. |
||
classifierEnable | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.2 |
Classifier rule enabled/disabled. |
||
classifierPacketFormat | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.3 |
Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5). |
||
classifierVlanId | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.4 |
Vlan id for classifer rule, 1~4094. |
||
classifier8021pPriority | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.5 |
802.1p priority for classifier rule, 0~7. |
||
classifierEtherType | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.6 |
Ether type for classifier rule, in decimal expression. |
||
classifierSrcMAC | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.7 |
Source mac address for classifier rule |
||
classifierIncomingPort | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.8 |
Incoming Port for classifier rule |
||
classifierDstMAC | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.9 |
Destination mac address for classifier rule |
||
classifierDSCP | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.10 |
DSCP for classifier rule |
||
classifierIpProtocol | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.11 |
IP Protocol for classifier rule |
||
classifierEstablishOnly | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.12 |
IP Protocol for EstablishOnly for classifier rule |
||
classifierSrcIp | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.13 |
Source IP address for classifier rule |
||
classifierSrcIpMask | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.14 |
Source IP Mask for classifier rule |
||
classifierSrcSocket | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.15 |
Source Socket Number for classifier rule |
||
classifierDstIp | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.16 |
Destination IP address for classifier rule |
||
classifierDstIpMask | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.17 |
Destination IP Mask for classifier rule |
||
classifierDstSocket | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.18 |
Destination Socket Number for classifier rule |
||
classifierRowstatus | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.19 |
Row Status for classifier rule |
||
classifierSrcIpv6 | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.20 |
Source IPv6 address for classifier rule |
||
classifierSrcIpv6Mask | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.21 |
Source IPv6 Mask for classifier rule |
||
classifierDstIpv6 | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.22 |
Destination IPv6 address for classifier rule |
||
classifierDstIpv6Mask | 1.3.6.1.4.1.890.1.5.12.43.39.1.1.23 |
Destination IPv6 Mask for classifier rule |
||
classifierRuleSet | 1.3.6.1.4.1.890.1.5.12.43.39.2 |
classifier Rule Set. |
||
policySetup | 1.3.6.1.4.1.890.1.5.12.43.40 | |||
policyTable | 1.3.6.1.4.1.890.1.5.12.43.40.1 | |||
1.3.6.1.4.1.890.1.5.12.43.40.1.1 |
An entry in policyTable. |
|||
policyName | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.1 |
Name of policy rule. |
||
policyEnable | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.2 |
Policy rule enabled/disabled. |
||
policyClassifier | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.3 |
Classifier of policy rule. |
||
policyVlanId | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.4 |
Vlan id for policy rule, 1~4094. |
||
policyEgressPort | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.5 |
Egress Port for policy rule |
||
policyOutPktFormat | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.6 |
Outgoing packet format for Egress port for policy rule |
||
policy8021pPriority | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.7 |
802.1p priority for policy rule, 0~7. |
||
policyDSCP | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.8 |
DSCP for policy rule. |
||
policyTOS | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.9 |
TOS for policy rule, 0~7 |
||
policyBandwidth | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.10 |
Bandwidth for policy rule |
||
policyOutOfProfileDSCP | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.11 |
Out Of Profile DSCP for policy rule. |
||
policyForwardingAction | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.12 |
Forwarding Action for policy rule |
||
policyPriorityAction | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.13 |
Priority Action for policy rule |
||
policyDiffServAction | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.14 |
DiffServ Action for policy rule |
||
policyOutgoingAction | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.15 |
Outgoing Action for policy rule |
||
policyMeteringEnable | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.16 |
Metering for Policy rule enabled/disabled. |
||
policyOutOfProfileAction | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.17 |
Out Of Profile Action for policy rule |
||
policyRowstatus | 1.3.6.1.4.1.890.1.5.12.43.40.1.1.18 |
Row Status for policy rule |
||
policyRuleSet | 1.3.6.1.4.1.890.1.5.12.43.40.2 |
policy Rule Set. |
||
switchCounterStatus | 1.3.6.1.4.1.890.1.5.12.43.42 | |||
vlanCounterTable | 1.3.6.1.4.1.890.1.5.12.43.42.1 | |||
1.3.6.1.4.1.890.1.5.12.43.42.1.1 |
An entry in vlanCounterTable. |
|||
vlanCounterTxPkts | 1.3.6.1.4.1.890.1.5.12.43.42.1.1.1 | |||
vlanCounterRxPkts | 1.3.6.1.4.1.890.1.5.12.43.42.1.1.2 | |||
switchCounterTable | 1.3.6.1.4.1.890.1.5.12.43.42.2 | |||
1.3.6.1.4.1.890.1.5.12.43.42.2.1 |
An entry in switchCounterTable. |
|||
switchUnknownUnicastCounter | 1.3.6.1.4.1.890.1.5.12.43.42.2.1.1 |
Unknown unicast counter for the port. |
||
vlanCounterResetTable | 1.3.6.1.4.1.890.1.5.12.43.42.3 | |||
1.3.6.1.4.1.890.1.5.12.43.42.3.1 |
An entry in vlanCounterTable. |
|||
vlanCounterReset | 1.3.6.1.4.1.890.1.5.12.43.42.3.1.1 |
Clear VLAN counters. |
||
vlanCounterSwitchSetup | 1.3.6.1.4.1.890.1.5.12.43.42.4 | |||
vlanCounterSwitch | 1.3.6.1.4.1.890.1.5.12.43.42.4.1 |
Switch VLAN counters on/off. |
||
vlanCounterVlan | 1.3.6.1.4.1.890.1.5.12.43.42.4.2 |
VLAN counter per vlan. |
||
vlanCounterPort | 1.3.6.1.4.1.890.1.5.12.43.42.4.3 |
VLAN counters per port. |
||
vlanCounterDirection | 1.3.6.1.4.1.890.1.5.12.43.42.4.4 |
VLAN counters per direction. |
||
rateLimitProfilePortSetup | 1.3.6.1.4.1.890.1.5.12.43.43 | |||
rateLimitProfilePortTable | 1.3.6.1.4.1.890.1.5.12.43.43.1 | |||
1.3.6.1.4.1.890.1.5.12.43.43.1.1 |
An entry in rateLimitProfilePortTable. |
|||
rateLimitPortProfile | 1.3.6.1.4.1.890.1.5.12.43.43.1.1.1 | |||
perQueueProfilePortTable | 1.3.6.1.4.1.890.1.5.12.43.43.2 | |||
1.3.6.1.4.1.890.1.5.12.43.43.2.1 |
An entry in perQueueProfilePortTable. |
|||
perQueuePortProfile | 1.3.6.1.4.1.890.1.5.12.43.43.2.1.1 | |||
rateLimitProfileSetup | 1.3.6.1.4.1.890.1.5.12.43.44 | |||
rateLimitMaxNumberOfProfile | 1.3.6.1.4.1.890.1.5.12.43.44.1 | |||
rateLimitProfileTable | 1.3.6.1.4.1.890.1.5.12.43.44.2 | |||
1.3.6.1.4.1.890.1.5.12.43.44.2.1 |
An entry in rateLimitMaxNumberOfProfile. |
|||
rateLimitProfileName | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.1 | |||
rateLimitProfilePeakRate | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.2 |
Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
||
rateLimitProfileEgrRate | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.3 |
Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
||
rateLimitProfileCommitRate | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.4 |
Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000. |
||
rateLimitProfilePeakState | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.5 |
Ingress peak rate limiting enabled/disabled on the port. |
||
rateLimitProfileEgrState | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.6 |
Egress rate limiting enabled/disabled on the port. |
||
rateLimitProfileCommitState | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.7 |
Ingress commit rate limiting enabled/disabled on the port. |
||
rateLimitProfileRowStatus | 1.3.6.1.4.1.890.1.5.12.43.44.2.1.8 | |||
perQueueMaxNumberOfProfile | 1.3.6.1.4.1.890.1.5.12.43.44.3 | |||
perQueueProfileTable | 1.3.6.1.4.1.890.1.5.12.43.44.4 | |||
1.3.6.1.4.1.890.1.5.12.43.44.4.1 |
An entry in perQueueMaxNumberOfProfile. |
|||
perQueueProfileName | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.1 | |||
perQueueProfileQ0CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.2 |
Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ0PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.3 |
Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ1CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.4 |
Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ1PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.5 |
Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ2CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.6 |
Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ2PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.7 |
Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ3CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.8 |
Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ3PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.9 |
Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ4CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.10 |
Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ4PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.11 |
Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ5CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.12 |
Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ5PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.13 |
Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ6CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.14 |
Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ6PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.15 |
Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ7CIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.16 |
Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileQ7PIR | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.17 |
Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000. |
||
perQueueProfileRowStatus | 1.3.6.1.4.1.890.1.5.12.43.44.4.1.18 | |||
vlanSecuritySetup | 1.3.6.1.4.1.890.1.5.12.43.45 | |||
vlanSecurityTable | 1.3.6.1.4.1.890.1.5.12.43.45.1 | |||
1.3.6.1.4.1.890.1.5.12.43.45.1.1 |
An entry in vlanSecurityTable. |
|||
vlanSecurityCount | 1.3.6.1.4.1.890.1.5.12.43.45.1.1.1 |
Number of (dynamic) MAC addresses that may be learned on the VID. |
||
cfmSetup | 1.3.6.1.4.1.890.1.5.12.43.46 | |||
cfmLoopbackPortTable | 1.3.6.1.4.1.890.1.5.12.43.46.1 | |||
1.3.6.1.4.1.890.1.5.12.43.46.1.1 |
An entry in cfmLoopbackPortTable. |
|||
cfmLoopbackPortState | 1.3.6.1.4.1.890.1.5.12.43.46.1.1.1 |
CFM loopback enabled/disabled on the port. |
||
cfmMIPTable | 1.3.6.1.4.1.890.1.5.12.43.46.2 | |||
1.3.6.1.4.1.890.1.5.12.43.46.2.1 |
An entry in cfmMIPTable. |
|||
cfmPort | 1.3.6.1.4.1.890.1.5.12.43.46.2.1.1 | |||
cfmVlanID | 1.3.6.1.4.1.890.1.5.12.43.46.2.1.2 | |||
cfmLevel | 1.3.6.1.4.1.890.1.5.12.43.46.2.1.3 | |||
cfmMIPRowStatus | 1.3.6.1.4.1.890.1.5.12.43.46.2.1.4 | |||
cfmActionEnableStatus | 1.3.6.1.4.1.890.1.5.12.43.46.3 |
CFM Action enable status for the CO device |
||
mrstp | 1.3.6.1.4.1.890.1.5.12.43.48 | |||
mrstpSetup | 1.3.6.1.4.1.890.1.5.12.43.48.1 | |||
mrstpBridgeTable | 1.3.6.1.4.1.890.1.5.12.43.48.1.1 | |||
1.3.6.1.4.1.890.1.5.12.43.48.1.1.1 |
An entry in mrstpBridgeTable. |
|||
mrstpBridgeIndex | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.1 |
The tree index of the MRSTP. |
||
mrstpState | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.2 |
Enabled/disabled on the mrstp bridge. |
||
mrstpProtocolSpecification | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.3 |
An indication of what version of the Spanning Tree Protocol is being run. The value decLb100(2) indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return ieee8021d(3). If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined. |
||
mrstpPriority | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.4 |
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. |
||
mrstpTimeSinceTopologyChange | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.5 |
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
||
mrstpTopChanges | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.6 |
The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
||
mrstpDesignatedRoot | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.7 |
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
||
mrstpRootCost | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.8 |
The cost of the path to the root as seen from this bridge. |
||
mrstpRootPort | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.9 |
The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
||
mrstpMaxAge | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.10 |
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
||
mrstpHelloTime | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.11 |
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
||
mrstpHoldTime | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.12 |
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
||
mrstpForwardDelay | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.13 |
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mrstpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] |
||
mrstpBridgeMaxAge | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.14 |
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
||
mrstpBridgeHelloTime | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.15 |
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
||
mrstpBridgeForwardDelay | 1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.16 |
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
||
mrstpPortTable | 1.3.6.1.4.1.890.1.5.12.43.48.1.2 |
A table that contains port-specific information for the Spanning Tree Protocol. |
||
1.3.6.1.4.1.890.1.5.12.43.48.1.2.1 |
A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
|||
mrstpPort | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.1 |
The port number of the port for which this entry contains Spanning Tree Protocol management information. |
||
mrstpPortPriority | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.2 |
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort. |
||
mrstpPortState | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.3 |
The ports current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mrstpPortEnable), this object will have a value of disabled(1). |
||
mrstpPortEnable | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.4 |
The enabled/disabled status of the port. |
||
mrstpPortPathCost | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.5 |
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. |
||
mrstpPortDesignatedRoot | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.6 |
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
||
mrstpPortDesignatedCost | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.7 |
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
||
mrstpPortDesignatedBridge | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.8 |
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this ports segment. |
||
mrstpPortDesignatedPort | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.9 |
The Port Identifier of the port on the Designated Bridge for this ports segment. |
||
mrstpPortForwardTransitions | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.10 |
The number of times this port has transitioned from the Learning state to the Forwarding state. |
||
mrstpPortOnBridgeIndex | 1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.11 |
Indetify the bridge index that this port joined to in MRSTP. |
||
mrstpNotifications | 1.3.6.1.4.1.890.1.5.12.43.48.2 | |||
dhcpSnp | 1.3.6.1.4.1.890.1.5.12.43.49 | |||
dhcpSnpVlanTable | 1.3.6.1.4.1.890.1.5.12.43.49.1 | |||
1.3.6.1.4.1.890.1.5.12.43.49.1.1 | ||||
dhcpSnpVlanEntryVid | 1.3.6.1.4.1.890.1.5.12.43.49.1.1.1 | |||
dhcpSnpVlanEntryEnable | 1.3.6.1.4.1.890.1.5.12.43.49.1.1.2 | |||
dhcpSnpVlanEntryOption82Enable | 1.3.6.1.4.1.890.1.5.12.43.49.1.1.3 | |||
dhcpSnpVlanEntryInfo | 1.3.6.1.4.1.890.1.5.12.43.49.1.1.4 | |||
dhcpSnpVlanEntryRemoteID | 1.3.6.1.4.1.890.1.5.12.43.49.1.1.5 | |||
dhcpSnpPortTable | 1.3.6.1.4.1.890.1.5.12.43.49.2 | |||
1.3.6.1.4.1.890.1.5.12.43.49.2.1 | ||||
dhcpSnpPortEntryPort | 1.3.6.1.4.1.890.1.5.12.43.49.2.1.1 | |||
dhcpSnpPortEntryTrust | 1.3.6.1.4.1.890.1.5.12.43.49.2.1.2 | |||
dhcpSnpPortEntryRate | 1.3.6.1.4.1.890.1.5.12.43.49.2.1.3 |
0 means unlimited |
||
dhcpSnpBindTable | 1.3.6.1.4.1.890.1.5.12.43.49.3 | |||
1.3.6.1.4.1.890.1.5.12.43.49.3.1 | ||||
dhcpSnpBindEntryMac | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.1 | |||
dhcpSnpBindEntryVid | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.2 | |||
dhcpSnpBindEntryIP | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.3 | |||
dhcpSnpBindEntryLease | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.4 | |||
dhcpSnpBindEntryType | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.5 | |||
dhcpSnpBindEntryPort | 1.3.6.1.4.1.890.1.5.12.43.49.3.1.6 | |||
dhcpSnpEnable | 1.3.6.1.4.1.890.1.5.12.43.49.4 | |||
dhcpSnpDb | 1.3.6.1.4.1.890.1.5.12.43.49.5 | |||
dhcpSnpDbAbort | 1.3.6.1.4.1.890.1.5.12.43.49.5.1 | |||
dhcpSnpDbWriteDelay | 1.3.6.1.4.1.890.1.5.12.43.49.5.2 | |||
dhcpSnpDbUrl | 1.3.6.1.4.1.890.1.5.12.43.49.5.3 | |||
dhcpSnpDbUrlRenew | 1.3.6.1.4.1.890.1.5.12.43.49.5.4 | |||
dhcpSnpDbStat | 1.3.6.1.4.1.890.1.5.12.43.49.5.5 | |||
dhcpSnpDbStatClear | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.1 | |||
dhcpSnpDbStatAgentRunning | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.2 | |||
dhcpSnpDbStatDelayExpiry | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.3 | |||
dhcpSnpDbStatAbortExpiry | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.4 | |||
dhcpSnpDbStatLastSuccTime | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.5 | |||
dhcpSnpDbStatLastFailTime | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.6 | |||
dhcpSnpDbStatLastFailReason | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.7 | |||
dhcpSnpDbStatTotalAttempt | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.8 | |||
dhcpSnpDbStatStartupFail | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.9 | |||
dhcpSnpDbStatSuccTrans | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.10 | |||
dhcpSnpDbStatFailTrans | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.11 | |||
dhcpSnpDbStatSuccRead | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.12 | |||
dhcpSnpDbStatFailRead | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.13 | |||
dhcpSnpDbStatSuccWrite | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.14 | |||
dhcpSnpDbStatFailWrite | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.15 | |||
dhcpSnpDbStatFirstSuccAccess | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.16 | |||
dhcpSnpDbStatLastIgnoreBindCol | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.17 |
Last ignored: binding collision |
||
dhcpSnpDbStatLastIgnoreExpireLease | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.18 |
Last ignored: expired leases |
||
dhcpSnpDbStatLastIgnoreInvalidIntf | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.19 |
Last ignored: invalid interface |
||
dhcpSnpDbStatLastIgnoreUnsuppVlan | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.20 |
Last ignored: unsupported vlans |
||
dhcpSnpDbStatLastIgnoreParse | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.21 |
Last ignored: parsing error |
||
dhcpSnpDbStatTotalIgnoreBindCol | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.22 |
Total ignored: binding collision |
||
dhcpSnpDbStatTotalIgnoreExpireLease | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.23 |
Total ignored: expired leases |
||
dhcpSnpDbStatTotalIgnoreInvalidIntf | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.24 |
Total ignored: invalid interface |
||
dhcpSnpDbStatTotalIgnoreUnsuppVlan | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.25 |
Total ignored: unsupported vlans |
||
dhcpSnpDbStatTotalIgnoreParse | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.26 |
Total ignored: parsing error |
||
dhcpSnpDbStatFirstSuccessAccess | 1.3.6.1.4.1.890.1.5.12.43.49.5.5.27 |
First Success Access |
||
dhcpSnpDhcpVlan | 1.3.6.1.4.1.890.1.5.12.43.49.6 | |||
dhcpSnpDhcpVlanVid | 1.3.6.1.4.1.890.1.5.12.43.49.6.1 |
0: disable DHCP VLAN. |
||
ipsg | 1.3.6.1.4.1.890.1.5.12.43.50 | |||
ipsgTable | 1.3.6.1.4.1.890.1.5.12.43.50.1 | |||
1.3.6.1.4.1.890.1.5.12.43.50.1.1 | ||||
ipsgEntryMac | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.1 | |||
ipsgEntryVid | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.2 | |||
ipsgEntryIp | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.3 | |||
ipsgEntryLease | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.4 |
second |
||
ipsgEntryType | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.5 | |||
ipsgEntryPort | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.6 |
0 means any port |
||
ipsgEntryState | 1.3.6.1.4.1.890.1.5.12.43.50.1.1.7 | |||
arpInspect | 1.3.6.1.4.1.890.1.5.12.43.51 | |||
arpInspectSetup | 1.3.6.1.4.1.890.1.5.12.43.51.1 | |||
arpInspectState | 1.3.6.1.4.1.890.1.5.12.43.51.1.1 | |||
arpInspectFilterAgingTime | 1.3.6.1.4.1.890.1.5.12.43.51.1.2 | |||
arpInspectLog | 1.3.6.1.4.1.890.1.5.12.43.51.1.3 | |||
arpInspectLogEntries | 1.3.6.1.4.1.890.1.5.12.43.51.1.3.1 | |||
arpInspectLogRate | 1.3.6.1.4.1.890.1.5.12.43.51.1.3.2 | |||
arpInspectLogInterval | 1.3.6.1.4.1.890.1.5.12.43.51.1.3.3 | |||
arpInspectVlanTable | 1.3.6.1.4.1.890.1.5.12.43.51.1.4 | |||
1.3.6.1.4.1.890.1.5.12.43.51.1.4.1 | ||||
arpInspectVlanVid | 1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.1 | |||
arpInspectVlanLog | 1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.2 | |||
arpInspectVlanStatus | 1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.3 | |||
arpInspectPortTable | 1.3.6.1.4.1.890.1.5.12.43.51.1.5 | |||
1.3.6.1.4.1.890.1.5.12.43.51.1.5.1 | ||||
arpInspectPortIndex | 1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.1 | |||
arpInspectPortTrust | 1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.2 | |||
arpInspectPortRate | 1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.3 | |||
arpInspectPortInterval | 1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.4 | |||
arpInspectStatus | 1.3.6.1.4.1.890.1.5.12.43.51.2 | |||
arpInspectFilterClear | 1.3.6.1.4.1.890.1.5.12.43.51.2.1 | |||
arpInspectLogClear | 1.3.6.1.4.1.890.1.5.12.43.51.2.2 | |||
arpInspectFilterTable | 1.3.6.1.4.1.890.1.5.12.43.51.2.3 | |||
1.3.6.1.4.1.890.1.5.12.43.51.2.3.1 | ||||
arpInspectFilterMac | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.1 | |||
arpInspectFilterVid | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.2 | |||
arpInspectFilterPort | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.3 | |||
arpInspectFilterExpiry | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.4 | |||
arpInspectFilterReason | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.5 | |||
arpInspectFilterRowStatus | 1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.6 | |||
arpInspectLogTable | 1.3.6.1.4.1.890.1.5.12.43.51.2.4 | |||
1.3.6.1.4.1.890.1.5.12.43.51.2.4.1 | ||||
arpInspectLogMac | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.1 | |||
arpInspectLogVid | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.2 | |||
arpInspectLogPort | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.3 | |||
arpInspectLogIp | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.4 | |||
arpInspectLogNumPkt | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.5 | |||
arpInspectLogReason | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.6 | |||
arpInspectLogTime | 1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.7 | |||
arpInspectStatisticsTable | 1.3.6.1.4.1.890.1.5.12.43.51.2.5 | |||
1.3.6.1.4.1.890.1.5.12.43.51.2.5.1 | ||||
arpInspectStatisticsVid | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.1 | |||
arpInspectStatisticsReceived | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.2 | |||
arpInspectStatisticsRequest | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.3 | |||
arpInspectStatisticsReply | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.4 | |||
arpInspectStatisticsForward | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.5 | |||
arpInspectStatisticsDrop | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.6 | |||
arpInspectStatisticsClear | 1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.7 | |||
trTCMSetup | 1.3.6.1.4.1.890.1.5.12.43.52 | |||
trTCMState | 1.3.6.1.4.1.890.1.5.12.43.52.1 |
Two-rate three color marker enabled/disabled for the switch. |
||
trTCMMode | 1.3.6.1.4.1.890.1.5.12.43.52.2 | |||
trTCMPortTable | 1.3.6.1.4.1.890.1.5.12.43.52.3 | |||
1.3.6.1.4.1.890.1.5.12.43.52.3.1 |
An entry in trTCMPortTable. |
|||
trTCMPortState | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.1 |
Two-rate three color marker enabled/disabled on the port. |
||
trTCMPortCIR | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.2 |
Allowed CIR in pkts/s. |
||
trTCMPortPIR | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.3 |
Allowed PIR in pkts/s. |
||
trTCMPortDscpGreen | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.4 |
0-63 |
||
trTCMPortDscpYellow | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.5 |
0-63 |
||
trTCMPortDscpRed | 1.3.6.1.4.1.890.1.5.12.43.52.3.1.6 |
0-63 |
||
loopGuardSetup | 1.3.6.1.4.1.890.1.5.12.43.53 | |||
loopGuardState | 1.3.6.1.4.1.890.1.5.12.43.53.1 | |||
loopGuardPortTable | 1.3.6.1.4.1.890.1.5.12.43.53.2 | |||
1.3.6.1.4.1.890.1.5.12.43.53.2.1 |
An entry in loopGuardPortTable. |
|||
loopGuardPortState | 1.3.6.1.4.1.890.1.5.12.43.53.2.1.1 | |||
loopGuardPortMode | 1.3.6.1.4.1.890.1.5.12.43.53.2.1.2 |
Specify loopguard mode for each port |
||
loopGuardPortRecoverTime | 1.3.6.1.4.1.890.1.5.12.43.53.2.1.3 |
recover time to activate port in seconds. |
||
subnetBasedVlanSetup | 1.3.6.1.4.1.890.1.5.12.43.54 | |||
subnetBasedVlanState | 1.3.6.1.4.1.890.1.5.12.43.54.1 |
subnet-based vlan feature enabled/disabled for the switch. |
||
dhcpVlanOverrideState | 1.3.6.1.4.1.890.1.5.12.43.54.2 |
dhcp vlan override enabled/disabled when subnet-based vlan is enabled. |
||
subnetBasedVlanTable | 1.3.6.1.4.1.890.1.5.12.43.54.3 | |||
1.3.6.1.4.1.890.1.5.12.43.54.3.1 |
An entry in subnetBasedVlanTable. |
|||
subnetBasedVlanSrcIp | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.1 |
source ip for subnet-based vlan entry |
||
subnetBasedVlanSrcMaskBit | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.2 |
source ip mask-bits for subnet-based vlan entry |
||
subnetBasedVlanName | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.3 |
name for subnet-based vlan entry |
||
subnetBasedVlanVid | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.4 |
vid for subnet-based vlan entry |
||
subnetBasedVlanPriority | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.5 |
priority for subnet-based vlan entry |
||
subnetBasedVlanEntryState | 1.3.6.1.4.1.890.1.5.12.43.54.3.1.6 | |||
subnetBasedVlanInfoTable | 1.3.6.1.4.1.890.1.5.12.43.54.4 | |||
1.3.6.1.4.1.890.1.5.12.43.54.4.1 |
An entry in subnetBasedVlanInfoTable. |
|||
subnetBasedVlanInfoSrcIpType | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.1 |
Ip type for subnet-based vlan entry |
||
subnetBasedVlanInfoSrcIp | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.2 |
source ip of IPv4 or IPv6 for subnet-based vlan entry |
||
subnetBasedVlanInfoSrcMaskBit | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.3 |
source ip mask-bits for subnet-based vlan entry |
||
subnetBasedVlanInfoName | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.4 |
name for subnet-based vlan entry |
||
subnetBasedVlanInfoVid | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.5 |
vid for subnet-based vlan entry |
||
subnetBasedVlanInfoPriority | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.6 |
priority for subnet-based vlan entry |
||
subnetBasedVlanInfoEntryState | 1.3.6.1.4.1.890.1.5.12.43.54.4.1.7 | |||
macAuthenticationSetup | 1.3.6.1.4.1.890.1.5.12.43.55 | |||
macAuthenticationState | 1.3.6.1.4.1.890.1.5.12.43.55.1 | |||
macAuthenticationNamePrefix | 1.3.6.1.4.1.890.1.5.12.43.55.2 | |||
macAuthenticationPassword | 1.3.6.1.4.1.890.1.5.12.43.55.3 | |||
macAuthenticationTimeout | 1.3.6.1.4.1.890.1.5.12.43.55.4 | |||
macAuthenticationPortTable | 1.3.6.1.4.1.890.1.5.12.43.55.5 | |||
1.3.6.1.4.1.890.1.5.12.43.55.5.1 |
An entry in macAuthenticationPortTable. |
|||
macAuthenticationPortState | 1.3.6.1.4.1.890.1.5.12.43.55.5.1.1 | |||
mstp | 1.3.6.1.4.1.890.1.5.12.43.56 | |||
mstpGen | 1.3.6.1.4.1.890.1.5.12.43.56.1 | |||
mstpGenState | 1.3.6.1.4.1.890.1.5.12.43.56.1.1 |
Enabled/disabled on the mrstp bridge. |
||
mstpGenCfgIdName | 1.3.6.1.4.1.890.1.5.12.43.56.1.2 |
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
||
mstpGenCfgIdRevLevel | 1.3.6.1.4.1.890.1.5.12.43.56.1.3 |
This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
||
mstpGenCfgIdCfgDigest | 1.3.6.1.4.1.890.1.5.12.43.56.1.4 |
Configuration Digest. |
||
mstpGenHelloTime | 1.3.6.1.4.1.890.1.5.12.43.56.1.5 | |||
mstpGenMaxAge | 1.3.6.1.4.1.890.1.5.12.43.56.1.6 | |||
mstpGenForwardDelay | 1.3.6.1.4.1.890.1.5.12.43.56.1.7 | |||
mstpGenMaxHops | 1.3.6.1.4.1.890.1.5.12.43.56.1.8 |
13.22.f) |
||
mstpGenCistRootPathCost | 1.3.6.1.4.1.890.1.5.12.43.56.1.9 |
. |
||
mstpGenCistRootBrid | 1.3.6.1.4.1.890.1.5.12.43.56.1.10 |
. |
||
mstMapTable | 1.3.6.1.4.1.890.1.5.12.43.56.20 |
This table contains one entry for each instance of MSTP. |
||
1.3.6.1.4.1.890.1.5.12.43.56.20.1 |
A conceptual row containing the status of the MSTP instance. |
|||
mstMapIndex | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.1 |
Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation |
||
mstMapVlans1k | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.2 |
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. Empty (zero) most significant octes are not current. |
||
mstMapVlans2k | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.3 |
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. Empty (zero) most significant octes are not current. |
||
mstMapVlans3k | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.4 |
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. Empty (zero) most significant octes are not current. |
||
mstMapVlans4k | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.5 |
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to 1. Empty (zero) most significant octes are not current. |
||
mstMapRowStatus | 1.3.6.1.4.1.890.1.5.12.43.56.20.1.6 | |||
mstVlanTable | 1.3.6.1.4.1.890.1.5.12.43.56.30 |
This table contains one entry for each VlanId. |
||
1.3.6.1.4.1.890.1.5.12.43.56.30.1 |
Information regarding the instance to which each Vlan is mapped. |
|||
mstVlanIndex | 1.3.6.1.4.1.890.1.5.12.43.56.30.1.1 |
The VlanId for which this entry contains the instance mapped. |
||
mstVlanMstIndex | 1.3.6.1.4.1.890.1.5.12.43.56.30.1.2 |
An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped |
||
mstpPortTable | 1.3.6.1.4.1.890.1.5.12.43.56.40 |
A table that contains generic information about every port that is associated with this bridge. |
||
1.3.6.1.4.1.890.1.5.12.43.56.40.1 |
A list of information for each port of the bridge. |
|||
mstpPortIndex | 1.3.6.1.4.1.890.1.5.12.43.56.40.1.1 |
A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entitys network management system to the next re- initialization. |
||
mstpPortOperEdgePort | 1.3.6.1.4.1.890.1.5.12.43.56.40.1.2 | |||
mstpPortOperPointToPointMAC | 1.3.6.1.4.1.890.1.5.12.43.56.40.1.3 | |||
mstpXstTable | 1.3.6.1.4.1.890.1.5.12.43.56.50 |
. |
||
1.3.6.1.4.1.890.1.5.12.43.56.50.1 |
. |
|||
mstpXstId | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.1 |
0 means CIST. |
||
mstpXstBridgePriority | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.2 |
Bridge priority, in steps of 4096. |
||
mstpXstBridgeId | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.3 |
. |
||
mstpXstInternalRootCost | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.4 |
. |
||
mstpXstRootPort | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.5 |
. |
||
mstpXstTimeSinceTopologyChange | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.6 |
. |
||
mstpXstTopologyChangesCount | 1.3.6.1.4.1.890.1.5.12.43.56.50.1.7 |
. |
||
mstpXstPortTable | 1.3.6.1.4.1.890.1.5.12.43.56.60 |
. |
||
1.3.6.1.4.1.890.1.5.12.43.56.60.1 |
. |
|||
mstpXstPortXstId | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.1 |
0 means CIST. |
||
mstpXstPortIndex | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.2 |
The value of mstpPortIndex of the Port in mstpPortTable. |
||
mstpXstPortEnable | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.3 |
. |
||
mstpXstPortPriority | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.4 |
Port priority, in steps of 16. |
||
mstpXstPortPathCost | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.5 |
. |
||
mstpXstPortState | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.6 |
. |
||
mstpXstPortDesignatedRoot | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.7 |
. |
||
mstpXstPortDesignatedCost | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.8 |
. |
||
mstpXstPortDesignatedBridge | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.9 |
. |
||
mstpXstPortDesignatedPort | 1.3.6.1.4.1.890.1.5.12.43.56.60.1.10 |
. |
||
mstpNotifications | 1.3.6.1.4.1.890.1.5.12.43.56.70 | |||
radiusServerSetup | 1.3.6.1.4.1.890.1.5.12.43.57 | |||
radiusAuthServerSetup | 1.3.6.1.4.1.890.1.5.12.43.57.1 | |||
radiusAuthServerMode | 1.3.6.1.4.1.890.1.5.12.43.57.1.1 | |||
radiusAuthServerTimeout | 1.3.6.1.4.1.890.1.5.12.43.57.1.2 | |||
radiusAuthServerTable | 1.3.6.1.4.1.890.1.5.12.43.57.1.3 | |||
1.3.6.1.4.1.890.1.5.12.43.57.1.3.1 |
An entry in radiusAuthServerTable. |
|||
radiusAuthServerIndex | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.1 | |||
radiusAuthServerIpAddr | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.2 |
IPv4 only |
||
radiusAuthServerUdpPort | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.3 | |||
radiusAuthServerSharedSecret | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.4 | |||
radiusAuthServerIpAddressType | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.5 | |||
radiusAuthServerIpAddress | 1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.6 | |||
radiusAcctServerSetup | 1.3.6.1.4.1.890.1.5.12.43.57.2 | |||
radiusAcctServerTimeout | 1.3.6.1.4.1.890.1.5.12.43.57.2.1 | |||
radiusAcctServerTable | 1.3.6.1.4.1.890.1.5.12.43.57.2.2 | |||
1.3.6.1.4.1.890.1.5.12.43.57.2.2.1 |
An entry in radiusAcctServerTable. |
|||
radiusAcctServerIndex | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.1 | |||
radiusAcctServerIpAddr | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.2 |
IPv4 only |
||
radiusAcctServerUdpPort | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.3 | |||
radiusAcctServerSharedSecret | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.4 | |||
radiusAcctServerIpAddressType | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.5 | |||
radiusAcctServerIpAddress | 1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.6 | |||
tacacsServerSetup | 1.3.6.1.4.1.890.1.5.12.43.58 | |||
tacacsAuthServerSetup | 1.3.6.1.4.1.890.1.5.12.43.58.1 | |||
tacacsAuthServerMode | 1.3.6.1.4.1.890.1.5.12.43.58.1.1 | |||
tacacsAuthServerTimeout | 1.3.6.1.4.1.890.1.5.12.43.58.1.2 | |||
tacacsAuthServerTable | 1.3.6.1.4.1.890.1.5.12.43.58.1.3 | |||
1.3.6.1.4.1.890.1.5.12.43.58.1.3.1 |
An entry in tacacsAuthServerTable. |
|||
tacacsAuthServerIndex | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.1 | |||
tacacsAuthServerIpAddr | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.2 |
IPv4 only |
||
tacacsAuthServerTcpPort | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.3 | |||
tacacsAuthServerSharedSecret | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.4 | |||
tacacsAuthServerIpAddressType | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.5 | |||
tacacsAuthServerIpAddress | 1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.6 | |||
tacacsAcctServerSetup | 1.3.6.1.4.1.890.1.5.12.43.58.2 | |||
tacacsAcctServerTimeout | 1.3.6.1.4.1.890.1.5.12.43.58.2.1 | |||
tacacsAcctServerTable | 1.3.6.1.4.1.890.1.5.12.43.58.2.2 | |||
1.3.6.1.4.1.890.1.5.12.43.58.2.2.1 |
An entry in tacacsAcctServerTable. |
|||
tacacsAcctServerIndex | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.1 | |||
tacacsAcctServerIpAddr | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.2 |
IPv4 only |
||
tacacsAcctServerTcpPort | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.3 | |||
tacacsAcctServerSharedSecret | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.4 | |||
tacacsAcctServerIpAddressType | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.5 | |||
tacacsAcctServerIpAddress | 1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.6 | |||
aaaSetup | 1.3.6.1.4.1.890.1.5.12.43.59 | |||
authenticationSetup | 1.3.6.1.4.1.890.1.5.12.43.59.1 | |||
authenticationTypeTable | 1.3.6.1.4.1.890.1.5.12.43.59.1.1 | |||
1.3.6.1.4.1.890.1.5.12.43.59.1.1.1 |
An entry in authenticationTypeTable. |
|||
authenticationTypeName | 1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.1 | |||
authenticationTypeMethodList | 1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.2 |
Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4 |
||
accountingSetup | 1.3.6.1.4.1.890.1.5.12.43.59.2 | |||
accountingUpdatePeriod | 1.3.6.1.4.1.890.1.5.12.43.59.2.1 | |||
accountingTypeTable | 1.3.6.1.4.1.890.1.5.12.43.59.2.2 | |||
1.3.6.1.4.1.890.1.5.12.43.59.2.2.1 |
An entry in accountingTypeTable. |
|||
accountingTypeName | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.1 | |||
accountingTypeActive | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.2 | |||
accountingTypeBroadcast | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.3 | |||
accountingTypeMode | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.4 | |||
accountingTypeMethod | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.5 | |||
accountingTypePrivilege | 1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.6 | |||
vdsl2Ext | 1.3.6.1.4.1.890.1.5.12.43.60 | |||
xdsl2ExtNotifications | 1.3.6.1.4.1.890.1.5.12.43.60.0 | |||
xdsl2ExtLine | 1.3.6.1.4.1.890.1.5.12.43.60.1 | |||
xdsl2ExtLineTable | 1.3.6.1.4.1.890.1.5.12.43.60.1.1 |
The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product. |
||
1.3.6.1.4.1.890.1.5.12.43.60.1.1.1 |
The table xdsl2ExtLineTable contains extra functions besides those in xdsl2LineTable. |
|||
xdsl2LineCmndConfSelt | 1.3.6.1.4.1.890.1.5.12.43.60.1.1.1.1 |
Trigger a SELT(Single End Loop Test) for the line. Note the loop should be open. |
||
xdsl2ExtLineBandTable | 1.3.6.1.4.1.890.1.5.12.43.60.1.2 |
The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for ZyXEL product. |
||
1.3.6.1.4.1.890.1.5.12.43.60.1.2.1 |
The table xdsl2ExtLineBandTable contains extra per-band line status parameters besides those in xdsl2LineBandTable. |
|||
xdsl2LineBandStatusActAtp | 1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.1 |
Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. |
||
xdsl2LineBandStatusActRxPwr | 1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.2 |
Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. |
||
xdsl2ExtStatus | 1.3.6.1.4.1.890.1.5.12.43.60.2 | |||
xdsl2ExtLineSegmentTable | 1.3.6.1.4.1.890.1.5.12.43.60.2.1 |
The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for ZyXEL product. |
||
1.3.6.1.4.1.890.1.5.12.43.60.2.1.1 |
The table xdsl2LineExtSegmentEntry contains extra line segment status parameters besides those in xdsl2LineSegmentTable. This table stores HLOG/QLN/SNR measured during initialization. |
|||
xdsl2LineSegmentLog | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.1 |
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentLog. |
||
xdsl2LineSegmentQln | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.2 |
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentQln. |
||
xdsl2LineSegmentSnr | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.3 |
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentSnr. |
||
xdsl2LineSegmentStatus | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.4 |
This parameter indicates whether the Hlog/Qln/Snr data is ready. |
||
xdsl2LineSegmentLogScGroupSize | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.5 |
Number of subcarriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters. |
||
xdsl2LineSegmentQlnScGroupSize | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.6 |
Number of subcarriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters. |
||
xdsl2LineSegmentSnrScGroupSize | 1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.7 |
Number of subcarriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters. |
||
xdsl2ExtSCStatusTable | 1.3.6.1.4.1.890.1.5.12.43.60.2.3 |
The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for ZyXEL product. |
||
1.3.6.1.4.1.890.1.5.12.43.60.2.3.1 |
The table xdsl2ExtSCStatusTable contains extra subcarrier status parameters besides those in xdsl2LineSegmentTable. |
|||
xdsl2SCStatusActAtp | 1.3.6.1.4.1.890.1.5.12.43.60.2.3.1.1 |
Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. |
||
xdsl2ExtSCStatusBandTable | 1.3.6.1.4.1.890.1.5.12.43.60.2.4 |
The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for ZyXEL product. |
||
1.3.6.1.4.1.890.1.5.12.43.60.2.4.1 |
The table xdsl2ExtSCStatusBandTable contains extra subcarrier status parameters that are grouped per-band besides those in xdsl2SCStatusBandTable. |
|||
xdsl2SCStatusBandSnrMargin | 1.3.6.1.4.1.890.1.5.12.43.60.2.4.1.1 |
SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for all bearer channels received at the xTU. Values range from -640 to 630 in units of 0.1 dB (Physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. |
||
xdsl2ExtSeltStatusTable | 1.3.6.1.4.1.890.1.5.12.43.60.2.6 |
The table xdsl2ExtSeltStatusTable contains SELT status. |
||
1.3.6.1.4.1.890.1.5.12.43.60.2.6.1 |
The table xdsl2ExtSeltStatusEntry contains SELT status. |
|||
xdsl2SeltStatusLineType | 1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.2 | |||
xdsl2SeltStatusLineLength | 1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.3 | |||
xdsl2ExtSeltReflectionStatusTable | 1.3.6.1.4.1.890.1.5.12.43.60.2.7 |
The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection. |
||
1.3.6.1.4.1.890.1.5.12.43.60.2.7.1 |
The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection. |
|||
xdsl2SeltReflection | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.1 | |||
xdsl2SeltDelay | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.2 | |||
xdsl2SeltError | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.3 | |||
xdsl2SeltAtn180kHz | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.4 | |||
xdsl2SeltAtn300kHz | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.5 | |||
xdsl2SeltFitError | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.6 | |||
xdsl2SeltFitTermination | 1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.7 | |||
xdsl2ExtPM | 1.3.6.1.4.1.890.1.5.12.43.60.4 | |||
xdsl2ExtPMLine | 1.3.6.1.4.1.890.1.5.12.43.60.4.1 | |||
xdsl2ExtPMLineCurrTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1 |
The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1 |
The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. |
|||
xdsl2PMLSinceLinkFecs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.1 |
Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. |
||
xdsl2PMLSinceLinkEs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.2 |
Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS. |
||
xdsl2PMLSinceLinkSes | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.3 |
Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or more of the received bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS. |
||
xdsl2PMLSinceLinkLoss | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.4 |
Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R). |
||
xdsl2PMLSinceLinkUas | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.5 |
Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. |
||
xdsl2PMLSinceLinkLofs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.6 |
Count of seconds since last link up that there was LOF. |
||
xdsl2PMLSinceLinkLol | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.7 |
Count of times the line loss of link since last link up. |
||
xdsl2PMLSinceLinkLols | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.8 |
Count of seconds since last link up that there was Loss of Link . |
||
xdsl2PMLSinceLinkLpr | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.9 |
Count of the line loss of power since last link up. |
||
xdsl2PMLSinceLinkLprs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.10 |
Count of seconds since last link up that there was Loss of Power . |
||
xdsl2PMLCurr15MLofs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.11 |
Count of seconds during this interval that there was LOF. |
||
xdsl2PMLCurr15MLol | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.12 |
Count of times during this interval that the line Loss of Link. |
||
xdsl2PMLCurr15MLols | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.13 |
Count of seconds during this interval that there was Loss of Link. |
||
xdsl2PMLCurr15MLpr | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.14 |
Count of times during this interval that the line Loss of Power. |
||
xdsl2PMLCurr15MLprs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.15 |
Count of seconds during this interval that there was Loss of Power. |
||
xdsl2PMLCurr1DayLofs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.16 |
Count of seconds during this interval that there was LOF. |
||
xdsl2PMLCurr1DayLol | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.17 |
Count of times during this interval that the line Loss of Link. |
||
xdsl2PMLCurr1DayLols | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.18 |
Count of seconds during this interval that there was Loss of Link. |
||
xdsl2PMLCurr1DayLpr | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.19 |
Count of times during this interval that the line Loss of Power. |
||
xdsl2PMLCurr1DayLprs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.20 |
Count of seconds during this interval that there was Loss of Power. |
||
xdsl2PMLSinceLinkInmEqInp | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.21 |
The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLSinceLinkInmIAT | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.22 |
The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLSinceLinkInmME | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.23 |
The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr15MInmEqInp | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.24 |
The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr15MInmIAT | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.25 |
The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr15MInmME | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.26 |
The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr1DayInmEqInp | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.27 |
The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr1DayInmIAT | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.28 |
The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLCurr1DayInmME | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.29 |
The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF |
||
xdsl2ExtPMLineHist15MinTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3 |
The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1 |
The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. |
|||
xdsl2PMLHist15MLofs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.1 |
Count of seconds during this interval that there was LOF. |
||
xdsl2PMLHist15MLol | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.2 |
Count of times during this interval that the line Loss of Link. |
||
xdsl2PMLHist15MLols | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.3 |
Count of seconds during this interval that the line Loss of Link. |
||
xdsl2PMLHist15MLpr | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.4 |
Count of times during this interval that the line Loss of Power. |
||
xdsl2PMLHist15MLprs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.5 |
Count of seconds during this interval that the line Loss of Power. |
||
xdsl2PMLHist15MInmEqInp | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.6 |
The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLHist15MInmIAT | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.7 |
The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLHist15MInmME | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.8 |
The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF |
||
xdsl2ExtPMLineHist1DayTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4 |
The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1 |
The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. |
|||
xdsl2PMLHist1DLofs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.1 |
Count of seconds during this interval that there was LOF. |
||
xdsl2PMLHist1DLol | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.2 |
Count of times during this interval that the line Loss of Link. |
||
xdsl2PMLHist1DLols | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.3 |
Count of seconds during this interval that the line Loss of Link. |
||
xdsl2PMLHist1DLpr | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.4 |
Count of times during this interval that the line Loss of Power. |
||
xdsl2PMLHist1DLprs | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.5 |
Count of seconds during this interval that the line Loss of Power. |
||
xdsl2PMLHist1DInmEqInp | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.6 |
The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLHist1DInmIAT | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.7 |
The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF |
||
xdsl2PMLHist1DInmME | 1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.8 |
The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF |
||
xdsl2ExtPMChannel | 1.3.6.1.4.1.890.1.5.12.43.60.4.2 | |||
xdsl2ExtPMChCurrTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1 |
The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1 |
The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable. |
|||
xdsl2PMChSinceLinkUncorrectedCWs | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.1 |
Count of codewords that could not be corrected since last link up. |
||
xdsl2PMChCurr15MUncorrectedCWs | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.2 |
Count of codewords that could not be corrected since during this interval. |
||
xdsl2PMChCurr1DayUncorrectedCWs | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.3 |
Count of codewords that could not be corrected since during this interval. |
||
xdsl2PMChSinceLinkCodingViolations | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.4 |
Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up. |
||
xdsl2PMChSinceLinkCorrectedBlocks | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.5 |
Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up. |
||
xdsl2ExtPMChHist15MinTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.2 |
The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1 |
The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. |
|||
xdsl2PMChHist15MUncorrectedCWs | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1.1 |
Count of codewords that could not be corrected since during this interval. |
||
xdsl2ExtPMChHist1DTable | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.3 |
The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1 |
The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable. |
|||
xdsl2PMChHist1DayUncorrectedCWs | 1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1.1 |
Count of codewords that could not be corrected since during this interval. |
||
xdsl2ExtProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5 | |||
xdsl2ExtProfileLine | 1.3.6.1.4.1.890.1.5.12.43.60.5.1 | |||
xdsl2ExtLineConfTemplateTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.1 |
The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1 |
TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable. |
|||
xdsl2LConfTempPortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.1 |
A port list that indicates which ports this template applys for. |
||
xdsl2LConfTempInmConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.2 |
The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line. |
||
xdsl2ExtLineConfProfTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.2 |
The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1 |
The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable. |
|||
xdsl2LConfProfBitSwapDs | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.1 |
This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1) |
||
xdsl2LConfProfBitSwapUs | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.2 |
This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1) |
||
xdsl2LConfProfPortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.3 |
A port list that indicates which ports this profile applys for. |
||
xdsl2MaxNumLineConfTemplate | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.5 |
The maximum number of VDSL line template. |
||
xdsl2MaxNumLineConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.6 |
The maximum number of VDSL line profile. |
||
xdsl2ExtInmConfProfTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7 |
xdsl2ExtInmConfProfTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1 |
xdsl2ExtInmConfProfTable. |
|||
xdsl2ExtInmConfProfProfileName | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.1 |
This object identifies a row in this table. |
||
xdsl2ExtInmConfProfVtucInpEq | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.2 |
The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3. |
||
xdsl2ExtInmConfProfVturInpEq | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.3 |
The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3. |
||
xdsl2ExtInmConfProfVtucCC | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.4 |
The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over. |
||
xdsl2ExtInmConfProfVturCC | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.5 |
The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over. |
||
xdsl2ExtInmConfProfVtucIATO | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.6 |
The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. |
||
xdsl2ExtInmConfProfVturIATO | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.7 |
The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. |
||
xdsl2ExtInmConfProfVtucIATS | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.8 |
The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT. |
||
xdsl2ExtInmConfProfVturIATS | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.9 |
The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT. |
||
xdsl2ExtInmConfProfRowStatus | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.14 |
This object is used to create a new row or to modify or delete an existing row in this table. |
||
xdsl2ExtInmConfProfPortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.15 |
A port list that indicates which ports this profile applys for. |
||
xdsl2MaxNumInmConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.1.8 |
The maximum number of VDSL Inm profile. |
||
xdsl2ExtProfileChannel | 1.3.6.1.4.1.890.1.5.12.43.60.5.2 | |||
xdsl2ExtChConfProfileTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.2.1 |
The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1 |
The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable. |
|||
xdsl2ChConfProfPhyRDs | 1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.1 |
This configuration parameter defines phy retransmission mode on downstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2) |
||
xdsl2ChConfProfPhyRUs | 1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.2 |
This configuration parameter defines phy retransmission mode on upstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2) |
||
xdsl2ChConfProfPortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.3 |
A port list that indicates which ports this profile applys for. |
||
xdsl2MaxNumChConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.2.2 |
The maximum number of VDSL channel profile. |
||
xdsl2ExtProfileAlarmConf | 1.3.6.1.4.1.890.1.5.12.43.60.5.3 | |||
xdsl2ExtLineAlarmConfTemplateTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.1 |
The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1 |
The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable. |
|||
xdsl2LAlarmConfTempPortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1.3 |
A port list that indicates which ports this template applys for. |
||
xdsl2ExtLineAlarmConfProfileTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.2 |
The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1 |
The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable. |
|||
xdsl2LineAlarmConfProfileXtucThresh15MinLofs | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.1 |
A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
||
xdsl2LineAlarmConfProfileXturThresh15MinLofs | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.2 |
A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
||
xdsl2LAlarmConfProfilePortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.3 |
A port list that indicates which ports this profile applys for. |
||
xdsl2LineAlarmConfProfileXturThresh15MinLprs | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.4 |
A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
||
xdsl2ExtChAlarmConfProfileTable | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.3 |
The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable. |
||
1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1 |
The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable. |
|||
xdsl2ChAlarmConfProfilePortList | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1.3 |
A port list that indicates which ports this profileapplys for. |
||
xdsl2MaxNumLineAlarmConfTemplate | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.4 |
The maximum number of VDSL alarm template. |
||
xdsl2MaxNumLineAlarmConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.5 |
The maximum number of VDSL line alarm profile. |
||
xdsl2MaxNumChAlarmConfProfile | 1.3.6.1.4.1.890.1.5.12.43.60.5.3.6 |
The maximum number of VDSL channel alarm profile. |
||
macBasedVlanSetup | 1.3.6.1.4.1.890.1.5.12.43.61 | |||
macBasedVlanTable | 1.3.6.1.4.1.890.1.5.12.43.61.1 | |||
1.3.6.1.4.1.890.1.5.12.43.61.1.1 |
An entry in macBasedVlanTable. |
|||
macBasedVlanName | 1.3.6.1.4.1.890.1.5.12.43.61.1.1.1 |
Name of Mac-Based Vlan. |
||
macBasedVlanMAC | 1.3.6.1.4.1.890.1.5.12.43.61.1.1.2 |
Mac address for Mac-Based Vlan |
||
macBasedVlanVlanId | 1.3.6.1.4.1.890.1.5.12.43.61.1.1.3 |
Vlan id for Mac-Based Vlan, 1~4094. |
||
macBasedVlan8021pPriority | 1.3.6.1.4.1.890.1.5.12.43.61.1.1.4 |
802.1p priority for Mac-Based Vlan, 0~7. |
||
macBasedVlanRowstatus | 1.3.6.1.4.1.890.1.5.12.43.61.1.1.5 |
Row Status for Mac-Based Vlan |
||
vlanProfileSetup | 1.3.6.1.4.1.890.1.5.12.43.62 | |||
vlanProfileTable | 1.3.6.1.4.1.890.1.5.12.43.62.1 | |||
1.3.6.1.4.1.890.1.5.12.43.62.1.1 |
An entry in vlanProfileTable. |
|||
vlanProfileName | 1.3.6.1.4.1.890.1.5.12.43.62.1.1.1 |
Name of vlan Profile. |
||
vlanProfileMacLearning | 1.3.6.1.4.1.890.1.5.12.43.62.1.1.2 |
Mac learning for vlan profile |
||
vlanProfileUnknownMulticastDrop | 1.3.6.1.4.1.890.1.5.12.43.62.1.1.3 |
Drop unknown multicast packets. |
||
vlanProfileRowStatus | 1.3.6.1.4.1.890.1.5.12.43.62.1.1.4 |
Row status for vlan profile |
||
vlanTable | 1.3.6.1.4.1.890.1.5.12.43.62.2 | |||
1.3.6.1.4.1.890.1.5.12.43.62.2.1 |
An entry in vlanTable. |
|||
profileName | 1.3.6.1.4.1.890.1.5.12.43.62.2.1.1 |
Name of vlan Profile. |
||
dosPreventionSetup | 1.3.6.1.4.1.890.1.5.12.43.63 | |||
dosPreventionActive | 1.3.6.1.4.1.890.1.5.12.43.63.1 |
DoS prevention enabled/disabled for the switch. |
||
dosPreventionMacChecking | 1.3.6.1.4.1.890.1.5.12.43.63.4 |
Checking MAC enabled/disabled for the switch. |
||
dosPreventionIPChecking | 1.3.6.1.4.1.890.1.5.12.43.63.5 |
Checking IP enabled/disabled for the switch. |
||
dosPreventionICMPFragment | 1.3.6.1.4.1.890.1.5.12.43.63.9 |
Dropping fragmented ICMP packets enabled/disabled for the switch. |
||
dosPreventionTCPSYN | 1.3.6.1.4.1.890.1.5.12.43.63.11 |
Checking TCP SYN packets enabled/disabled for the switch. |
||
dosPreventionTCPFragment | 1.3.6.1.4.1.890.1.5.12.43.63.13 |
Dropping fragmented TCP packets with offset value of 1 enabled/disabled for the switch. |
||
dosPreventionTCPControlSN | 1.3.6.1.4.1.890.1.5.12.43.63.14 |
Dropping TCP packets with control flag of 0 and sequence number of 0 enabled/disabled for the switch. |
||
dosPreventionTCPPort | 1.3.6.1.4.1.890.1.5.12.43.63.15 |
Checking TCP port enabled/disabled for the switch. |
||
dosPreventionTCPSF | 1.3.6.1.4.1.890.1.5.12.43.63.16 |
Checking TCP packets with SYN and FIN bits enabled/disabled for the switch. |
||
dosPreventionTCPFUP | 1.3.6.1.4.1.890.1.5.12.43.63.17 |
Checking TCP packets with FIN, URG, PSH bits and sequence number enabled/disabled for the switch. |
||
dosPreventionUDPPort | 1.3.6.1.4.1.890.1.5.12.43.63.18 |
Checking UDP port enabled/disabled for the switch. |
||
ipv6Setup | 1.3.6.1.4.1.890.1.5.12.43.65 | |||
ipv6DefaultMgmt | 1.3.6.1.4.1.890.1.5.12.43.65.2 | |||
inbandIpv6Setup | 1.3.6.1.4.1.890.1.5.12.43.65.3 | |||
inbandIpv6Vid | 1.3.6.1.4.1.890.1.5.12.43.65.3.2 | |||
inbandIpv6StaticIp | 1.3.6.1.4.1.890.1.5.12.43.65.3.3 | |||
inbandIpv6StaticSubnetMask | 1.3.6.1.4.1.890.1.5.12.43.65.3.4 | |||
inbandIpv6StaticGateway | 1.3.6.1.4.1.890.1.5.12.43.65.3.5 | |||
outOfBandIpv6Setup | 1.3.6.1.4.1.890.1.5.12.43.65.4 | |||
outOfBandIpv6Ip | 1.3.6.1.4.1.890.1.5.12.43.65.4.1 | |||
outOfBandIpv6SubnetMask | 1.3.6.1.4.1.890.1.5.12.43.65.4.2 | |||
outOfBandIpv6Gateway | 1.3.6.1.4.1.890.1.5.12.43.65.4.3 | |||
l2ptSetup | 1.3.6.1.4.1.890.1.5.12.43.115 | |||
l2ptState | 1.3.6.1.4.1.890.1.5.12.43.115.1 |
L2PT feature enabled/disabled for the switch |
||
l2ptMacAddr | 1.3.6.1.4.1.890.1.5.12.43.115.2 |
L2PT destination mac address |
||
l2ptTable | 1.3.6.1.4.1.890.1.5.12.43.115.3 | |||
1.3.6.1.4.1.890.1.5.12.43.115.3.1 |
An entry in l2ptTable. |
|||
l2ptProtocolGroup | 1.3.6.1.4.1.890.1.5.12.43.115.3.1.1 |
L2PT protocols enabled/disabled on the port |
||
l2ptPointToPointProtocolGroup | 1.3.6.1.4.1.890.1.5.12.43.115.3.1.2 |
L2PT point-to-point protocols enabled/disabled on the port |
||
l2ptMode | 1.3.6.1.4.1.890.1.5.12.43.115.3.1.3 |
L2PT port role on the port |
||
vlanMappingSetup | 1.3.6.1.4.1.890.1.5.12.43.116 | |||
vlanMappingState | 1.3.6.1.4.1.890.1.5.12.43.116.1 | |||
vlanMappingPortTable | 1.3.6.1.4.1.890.1.5.12.43.116.2 | |||
1.3.6.1.4.1.890.1.5.12.43.116.2.1 |
An entry in vlanMappingPortTable. |
|||
vlanMappingPortState | 1.3.6.1.4.1.890.1.5.12.43.116.2.1.1 | |||
vlanMappingPortDropMiss | 1.3.6.1.4.1.890.1.5.12.43.116.2.1.2 | |||
vlanMappingRuleTable | 1.3.6.1.4.1.890.1.5.12.43.116.3 | |||
1.3.6.1.4.1.890.1.5.12.43.116.3.1 |
An entry in vlan-mapping rule table |
|||
vlanMappingRuleName | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.1 |
The name of vlan-mapping entry |
||
vlanMappingRulePort | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.2 |
interface port id |
||
vlanMappingRuleVid | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.3 |
inner vid |
||
vlanMappingRuleTransVid | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.4 |
translated vid |
||
vlanMappingRulePriority | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.5 |
priority |
||
vlanMappingRuleRowStatus | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.6 | |||
vlanMappingRuleReplacePrio | 1.3.6.1.4.1.890.1.5.12.43.116.3.1.7 |
Replace Original Priority |
||
transceiverInfo | 1.3.6.1.4.1.890.1.5.12.43.117 | |||
transceiverSerialInfoTable | 1.3.6.1.4.1.890.1.5.12.43.117.1 | |||
1.3.6.1.4.1.890.1.5.12.43.117.1.1 |
An entry in transceiverSerialInfoTable. |
|||
transceiverSerialInfoEntryPort | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.1 |
Index of transceiverSerialInfo. It is referred to dot1dBasePort |
||
transceiverSerialInfoEntryStatus | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.2 |
Transceiver module status. |
||
transceiverSerialInfoEntryVendor | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.3 |
Transceiver module vendor name. |
||
transceiverSerialInfoEntryPartNo | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.4 |
Part number provided by transceiver module vendor. |
||
transceiverSerialInfoEntrySerialNo | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.5 |
Serial number provided by transceiver module vendor. |
||
transceiverSerialInfoEntryRevision | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.6 |
Revision level for part number provided by transceiver module vendor. |
||
transceiverSerialInfoEntryDateCode | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.7 |
Transceiver module vendors manufacturing date code |
||
transceiverSerialInfoEntryTransceiver | 1.3.6.1.4.1.890.1.5.12.43.117.1.1.8 |
Transceiver module type names |
||
transceiverDdmInfoTable | 1.3.6.1.4.1.890.1.5.12.43.117.2 | |||
1.3.6.1.4.1.890.1.5.12.43.117.2.1 |
An entry in transceiverDdmInfoTable. |
|||
transceiverDdmInfoEntryPort | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.1 |
Index of transceiverDdmInfo. This will be referred to dot1dBasePort |
||
transceiverDdmInfoEntryType | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.2 |
Transceiver module status. |
||
transceiverDdmInfoEntryAlarmMax | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.3 |
Transceiver module vendor name. |
||
transceiverDdmInfoEntryAlarmMin | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.4 |
Part number provided by transceiver module vendor. |
||
transceiverDdmInfoEntryWarnMax | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.5 |
Serial number provided by transceiver module vendor. |
||
transceiverDdmInfoEntryWarnMin | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.6 |
Revision level for part number provided by transceiver module vendor. |
||
transceiverDdmInfoEntryCurrent | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.7 |
Transceiver module vendors manufacturing date code |
||
transceiverDdmInfoEntryDescription | 1.3.6.1.4.1.890.1.5.12.43.117.2.1.8 |
Transceiver module type names |
||
pppoeIASetup | 1.3.6.1.4.1.890.1.5.12.43.119 | |||
globalPPPoEIA | 1.3.6.1.4.1.890.1.5.12.43.119.1 | |||
globalPPPoEIAEnable | 1.3.6.1.4.1.890.1.5.12.43.119.1.1 |
To enable the global PPPoE IA. Once the configuration is enabled, the DSLAM will automatically generate the Agent Circuit ID field in PPPoE packet for identifying access loop logical ports as: slot number,portnumber and VLAN ID. |
||
globalPPPoEIACircuitIDInfoEnable | 1.3.6.1.4.1.890.1.5.12.43.119.1.2 |
To enable extra information to be appended into Agnet Circuit ID filed. |
||
globalPPPoEIACircuitIDInfoData | 1.3.6.1.4.1.890.1.5.12.43.119.1.3 | |||
globalPPPoEIARemoteIDEnable | 1.3.6.1.4.1.890.1.5.12.43.119.1.4 | |||
globalPPPoEIARemoteIDData | 1.3.6.1.4.1.890.1.5.12.43.119.1.5 | |||
globalPPPoEIARemoteIDType | 1.3.6.1.4.1.890.1.5.12.43.119.1.6 |
<1:port|2:system> |
||
globalPPPoEIACircuitIDType | 1.3.6.1.4.1.890.1.5.12.43.119.1.7 |
<1:hostname|2:system> |
||
pppoeIA | 1.3.6.1.4.1.890.1.5.12.43.119.2 | |||
maxNumberOfPPPoEIA | 1.3.6.1.4.1.890.1.5.12.43.119.2.1 |
The maximum number of PPPoE IA (by VLAN) entries that can be created. A value of 0 for this object implies that there exists settings for global PPPoE IA. |
||
pppoeIATable | 1.3.6.1.4.1.890.1.5.12.43.119.2.2 | |||
1.3.6.1.4.1.890.1.5.12.43.119.2.2.1 |
An entry in pppoeIATable. |
|||
pppoeIAVID | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.1 | |||
pppoeIACircuitIDInfoEnable | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.2 | |||
pppoeIACircuitIDInfoData | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.3 | |||
pppoeIARemoteIDEnable | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.4 | |||
pppoeIARemoteIDData | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.5 | |||
pppoeIARowStatus | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.6 | |||
pppoeIARemoteIDType | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.7 |
<1:port | 2:system> |
||
pppoeIACircuitIDType | 1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.8 |
<1:hostname | 2:system> |
||
iwfSetup | 1.3.6.1.4.1.890.1.5.12.43.120 | |||
pvcRuleTable | 1.3.6.1.4.1.890.1.5.12.43.120.1 | |||
1.3.6.1.4.1.890.1.5.12.43.120.1.1 |
An entry in PVC rule table |
|||
pvcRulePort | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.1 |
interface port id |
||
pvcRuleVpi | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.2 |
VPI |
||
pvcRuleVci | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.3 |
VCI |
||
pvcRulePvid | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.4 |
PVID |
||
pvcRuleEncap | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.5 |
ATM encapulation method |
||
pvcRulePriority | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.6 |
priority |
||
pvcRuleFCS | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.7 |
Frame Check Sequence of PDU is preserved or not. |
||
pvcRuleMVlan | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.8 |
Multicast VLAN pass through. |
||
pvcRuleRowStatus | 1.3.6.1.4.1.890.1.5.12.43.120.1.1.9 | |||
ippvcRuleTable | 1.3.6.1.4.1.890.1.5.12.43.120.2 | |||
1.3.6.1.4.1.890.1.5.12.43.120.2.1 |
An entry in IPPVC rule table |
|||
ippvcRulePort | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.1 |
interface port id |
||
ippvcRuleVpi | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.2 |
VPI |
||
ippvcRuleVci | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.3 |
VCI |
||
ippvcRulePvid | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.4 |
PVID |
||
ippvcRuleEncap | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.5 |
ATM encapulation method |
||
ippvcRulePriority | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.6 |
priority |
||
ippvcRuleSubnetIp | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.7 |
IP address of the subscriber intranet |
||
ippvcRuleSubnetMask | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.8 |
netmask of the subscriber intranet |
||
ippvcRuleDefaultRoute | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.9 |
default route for outgoing traffic |
||
ippvcRuleRowStatus | 1.3.6.1.4.1.890.1.5.12.43.120.2.1.10 | |||
paepvcRuleTable | 1.3.6.1.4.1.890.1.5.12.43.120.3 | |||
1.3.6.1.4.1.890.1.5.12.43.120.3.1 |
An entry in PAEPVC rule table |
|||
paepvcRulePort | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.1 |
interface port id |
||
paepvcRuleVpi | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.2 |
VPI |
||
paepvcRuleVci | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.3 |
VCI |
||
paepvcRulePvid | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.4 |
PVID |
||
paepvcRuleEncap | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.5 |
ATM encapulation method |
||
paepvcRulePriority | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.6 |
priority |
||
paepvcRuleRowStatus | 1.3.6.1.4.1.890.1.5.12.43.120.3.1.7 | |||
xdslBondingSetup | 1.3.6.1.4.1.890.1.5.12.43.121 | |||
xdslBondingConfigTable | 1.3.6.1.4.1.890.1.5.12.43.121.1 | |||
1.3.6.1.4.1.890.1.5.12.43.121.1.1 |
An entry in xdslBondingConfigTable. |
|||
xdslBondingConfigName | 1.3.6.1.4.1.890.1.5.12.43.121.1.1.1 |
Name of Xdsl Bonding Group. |
||
xdslBondingConfigMemberPort | 1.3.6.1.4.1.890.1.5.12.43.121.1.1.2 |
Member Ports of Bonding Group |
||
xdslBondingConfigRowStatus | 1.3.6.1.4.1.890.1.5.12.43.121.1.1.3 |
Row status for vlan profile |
||
xdslBondingStatusTable | 1.3.6.1.4.1.890.1.5.12.43.121.2 | |||
1.3.6.1.4.1.890.1.5.12.43.121.2.1 |
An entry in xdslBondingStatusTable. |
|||
xdslBondingStatusActive | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.1 |
Active(1), Inactive(2) |
||
xdslBondingStatusMemberPort | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.2 |
Member Ports of Bonding Group |
||
xdslBondingStatusActivePort | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.3 |
Active Ports of Bonding Group |
||
xdslBondingStatusMainPort | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.4 |
Main Port of Bonding Group. 4294967295(0xffffffff) for Null Value |
||
xdslBondingStatusFlagType | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.5 |
Flag Type. 4294967295(0xffffffff) for Null Value |
||
xdslBondingStatusRateUs | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.6 |
Up-stream Group Rate. 4294967295(0xffffffff) for Null Value |
||
xdslBondingStatusRateDs | 1.3.6.1.4.1.890.1.5.12.43.121.2.1.7 |
Down-stream Group Rate. 4294967295(0xffffffff) for Null Value |
||
macFlush | 1.3.6.1.4.1.890.1.5.12.43.122 | |||
macFlushTable | 1.3.6.1.4.1.890.1.5.12.43.122.1 | |||
1.3.6.1.4.1.890.1.5.12.43.122.1.1 |
An entry in macFlushTable. |
|||
macFlushPortIndex | 1.3.6.1.4.1.890.1.5.12.43.122.1.1.1 | |||
macFlushPortConfig | 1.3.6.1.4.1.890.1.5.12.43.122.1.1.2 |
Set 1 to execute mac flush operation in the specified port, read value will always return 0 |