ZYXEL-SAM1216: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-SAM1216
Download as:   
RFC1155-SMI, Q-BRIDGE-MIB, RFC1213-MIB, SNMPv2-TC, BRIDGE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxel 1.3.6.1.4.1.890
         products 1.3.6.1.4.1.890.1
             accessSwitch 1.3.6.1.4.1.890.1.5
                 sesSeries 1.3.6.1.4.1.890.1.5.5
                     sam1216-22 1.3.6.1.4.1.890.1.5.5.6
                         alarmconf 1.3.6.1.4.1.890.1.5.5.6.2
                             alarmOps 1.3.6.1.4.1.890.1.5.5.6.2.1
The manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. The various bit positions are: BIT 1: clear BIT 2: cutoff
                             alarmConfTable 1.3.6.1.4.1.890.1.5.5.6.2.2
This table includes alarm configuration.
                                 alarmConfEntry 1.3.6.1.4.1.890.1.5.5.6.2.2.1
An entry in alarmConfTable.
                                     alarmConfId 1.3.6.1.4.1.890.1.5.5.6.2.2.1.1
5000: linkUp 5001: linkDown 5002: shdslLoopAttenCrossing 5003: shdslSNRMarginCrossing 5004: shdslPerfESThresh 5005: shdslPerfSESThresh 5006: shdslPerfCRCAnomaliesThresh 5007: shdslPerfLOSWSThresh 5008: shdslPerfUASThresh 10000: eqptVoltageError 10001: eqptTempError 10002: eqptHwRTCError 10003: eqptHWMonitorFailed 10004: coldStart 10005: warmStart 15000: sysReboot 15001: sysAlarmCutoffEnabled 15002: sysAlarmClearEnabled 15003: sysLoginFailed 15004: sysMacAntiSpoofing 20000: enetlinkUp 20001: enetlinkDown
                                     alarmConfFacility 1.3.6.1.4.1.890.1.5.5.6.2.2.1.2
Alarm facility.
                                     alarmConfTarget 1.3.6.1.4.1.890.1.5.5.6.2.2.1.3
The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
                                     alarmConfSeverity 1.3.6.1.4.1.890.1.5.5.6.2.2.1.4
Alarm severity
                                     alarmConfClearable 1.3.6.1.4.1.890.1.5.5.6.2.2.1.5
Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
                             alarmCurrTable 1.3.6.1.4.1.890.1.5.5.6.2.3
This table includes current alarm information.
                                 alarmCurrEntry 1.3.6.1.4.1.890.1.5.5.6.2.3.1
An entry in alarmCurrTable.
                                     alarmCurrIndex 1.3.6.1.4.1.890.1.5.5.6.2.3.1.1
Index of the alarm.
                                     alarmCurrOccurTime 1.3.6.1.4.1.890.1.5.5.6.2.3.1.2
Alarm occurence time (in hundredths of a second) since the system was last re-initialized.
                                     alarmCurrTrapOid 1.3.6.1.4.1.890.1.5.5.6.2.3.1.3
Trap OID of the alarm.
                                     alarmCurrParam1 1.3.6.1.4.1.890.1.5.5.6.2.3.1.4
The 1st parameter of the alarm.
                                     alarmCurrParam2 1.3.6.1.4.1.890.1.5.5.6.2.3.1.5
The 2nd parameter of the alarm.
                                     alarmCurrParam3 1.3.6.1.4.1.890.1.5.5.6.2.3.1.6
The 3rd parameter of the alarm.
                                     alarmCurrParam4 1.3.6.1.4.1.890.1.5.5.6.2.3.1.7
The 4th parameter of the alarm.
                                     alarmCurrParam5 1.3.6.1.4.1.890.1.5.5.6.2.3.1.8
The 5th parameter of the alarm.
                                     alarmCurrParam6 1.3.6.1.4.1.890.1.5.5.6.2.3.1.9
The 6th parameter of the alarm.
                                     alarmCurrParam7 1.3.6.1.4.1.890.1.5.5.6.2.3.1.10
The 7th parameter of the alarm.
                                     alarmCurrParam8 1.3.6.1.4.1.890.1.5.5.6.2.3.1.11
The 8th parameter of the alarm.
                                     alarmCurrTimeDescr 1.3.6.1.4.1.890.1.5.5.6.2.3.1.12
The string representation of occurence time (YYYY/MM/DD HH:MM:SS).
                                     alarmCurrSeverity 1.3.6.1.4.1.890.1.5.5.6.2.3.1.13
The severity of the alarm.
                                     alarmCurrDescr 1.3.6.1.4.1.890.1.5.5.6.2.3.1.14
The description of the alarm.
                             alarmSeverityPortTable 1.3.6.1.4.1.890.1.5.5.6.2.4
This table includes the configuration of alarm reporting severity threshold for each port.
                                 alarmSeverityPortEntry 1.3.6.1.4.1.890.1.5.5.6.2.4.1
An entry in alarmSeverityPortTable.
                                     severityThresh 1.3.6.1.4.1.890.1.5.5.6.2.4.1.1
The minimum alarm severity that is reported.
                         multicast 1.3.6.1.4.1.890.1.5.5.6.7
                             igmpEnable 1.3.6.1.4.1.890.1.5.5.6.7.1
Enable/disable IGMP protocol.
                             mcastBandwidth 1.3.6.1.4.1.890.1.5.5.6.7.4
                                 mcastDefaultBandwidth 1.3.6.1.4.1.890.1.5.5.6.7.4.1
Default bandwidth requirement for a multicast channel.
                                 maxNumOfMcastBw 1.3.6.1.4.1.890.1.5.5.6.7.4.2
The maximum number of row entries that user can create in mcastBwTable.
                                 mcastBwTable 1.3.6.1.4.1.890.1.5.5.6.7.4.3
This table defines bandwidth budget for a range of multicast IP channels.
                                     mcastBwEntry 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1
An entry of mcastBwTable.
                                         mcastBwIndex 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.1
The index which specify the entry.
                                         mcastBwStartIp 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.2
The start multicast IP of the bandwidth control range.
                                         mcastBwEndIp 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.3
The end multicast IP of the bandwidth control range.
                                         mcastBwBandwidth 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.4
The bandwidth budget for the multicast IP channels.
                                         mcastBwRowStatus 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.5
The row status of the entry.
                                 mcastBwPortTable 1.3.6.1.4.1.890.1.5.5.6.7.4.4
This table specify the multicast bandwidth control of the port.
                                     mcastBwPortEntry 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1
An entry of mcastBwPortTable.
                                         mcastBwPortEnable 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.1
Enable/disable multicast bandwidth control for a port.
                                         mcastBwPortBandwidth 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.2
Set bandwidth threshold for a port.
                             igmpCount 1.3.6.1.4.1.890.1.5.5.6.7.5
                                 igmpCountPortTable 1.3.6.1.4.1.890.1.5.5.6.7.5.1
This table specify the IGMP count limiting of the port.
                                     igmpCountPortEntry 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1
An entry of igmpCountPortTable.
                                         igmpCountPortEnable 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.1
Enable/disable IGMP count limiting for a port.
                                         igmpCountPortLimit 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.2
The maximum allowed IGMP report count for a port.
                             mvlan 1.3.6.1.4.1.890.1.5.5.6.7.6
                                 maxNumOfMvlan 1.3.6.1.4.1.890.1.5.5.6.7.6.1
The maximum number of row entries that user can create in mvlanTable.
                                 mvlanTable 1.3.6.1.4.1.890.1.5.5.6.7.6.2
A table containing static configuration information for each multicast VLAN configured into the device.
                                     mvlanEntry 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1
An entry of mvlanTable.
                                         mvlanIndex 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.1
The VLAN-ID refering to this VLAN.
                                         mvlanName 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.2
An administratively assigned string, which may be used to identify the VLAN.
                                         mvlanEgressPorts 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.3
The set of ports which are permanently assigned to the egress list for this multicast VLAN.
                                         mvlanUntaggedPorts 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.4
The set of ports which should transmit egress packets for this multicast VLAN as untagged.
                                         mvlanRowStatus 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.5
This object indicates the status of this entry.
                                 mvlanTranslateTable 1.3.6.1.4.1.890.1.5.5.6.7.6.3
A table that contains multicast to VLAN translation.
                                     mvlanTranslateEntry 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1
An entry of mvlanTranslateTable.
                                         mvlanTranslateIndex 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.1
The index which specif the entry.
                                         mvlanTranslateStartIp 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.2
The start IP of the multicast VLAN translation.
                                         mvlanTranslateEndIp 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.3
The end IP of the multicast VLAN translation.
                             queryVid 1.3.6.1.4.1.890.1.5.5.6.7.7
                                 maxNumOfQryVid 1.3.6.1.4.1.890.1.5.5.6.7.7.1
The maximum number of row entries that user can create in qryVidConfTable. This object is supported by R1.02 and later versions.
                                 qryVidConfTable 1.3.6.1.4.1.890.1.5.5.6.7.7.2
This table defines statically set VLANs used for response IGMP report. This table is supported by R1.02 and later versions.
                                     qryVidConfEntry 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1
An entry in qryVidConfTable.
                                         qryVid 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.1
VLAN ID.
                                         qryVidRowStatus 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.2
This object indicates the status of this entry.
                                 qryVidStatusTable 1.3.6.1.4.1.890.1.5.5.6.7.7.3
This table shows statically set or dynamically learned VLANs used for response IGMP report.
                                     qryVidStatusEntry 1.3.6.1.4.1.890.1.5.5.6.7.7.3.1
An entry in qryVidStatusTable.
                                         qryVidType 1.3.6.1.4.1.890.1.5.5.6.7.7.3.1.1
VLAN type.
                         port 1.3.6.1.4.1.890.1.5.5.6.8
                             subrPortTable 1.3.6.1.4.1.890.1.5.5.6.8.1
This table includes subscriber attributes for the port.
                                 subrPortEntry 1.3.6.1.4.1.890.1.5.5.6.8.1.1
An entry in subrPortTable.
                                     subrPortName 1.3.6.1.4.1.890.1.5.5.6.8.1.1.1
Name of the subscriber.
                                     subrPortTel 1.3.6.1.4.1.890.1.5.5.6.8.1.1.2
Telephone number of the subscriber.
                             shdslPort 1.3.6.1.4.1.890.1.5.5.6.8.3
                                 shdslLineConfTable 1.3.6.1.4.1.890.1.5.5.6.8.3.1
This table includes common attributes describing the SHDSL line.
                                     shdslLineConfEntry 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1
An entry in shdslLineConfTable.
                                         shdslLineConfShdslMode 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.1
Mode of the SHDSL port.
                                         shdslLineConfPmms 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.2
Negotiated noise margin mode of the SHDSL port.
                                         shdslLineConfPboMode 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.3
Power backoff mode of the SHDSL port.
                                         shdslLineConfPboValue 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.4
Power backoff value of the SHDSL port.
                                         shdslLineConfShdslTCMode 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.5
Transmission Convergence Mode of the SHDSL port.
                                 shdslPortBatchSet 1.3.6.1.4.1.890.1.5.5.6.8.3.2
                                     shdslPortTarget 1.3.6.1.4.1.890.1.5.5.6.8.3.2.1
The managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
                                     shdslPortOps 1.3.6.1.4.1.890.1.5.5.6.8.3.2.2
The managed object is for SHDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set SHDSL mode BIT 4: set line profile BIT 5: set alarm profile BIT 6: set pmms mode to be normal BIT 7: set pmms mode to be forced BIT 8: set pbo mode to be normalepl BIT 9: set pbo mode to be forcedepl BIT 10: set pbo mode to be forcednoepl BIT 11: set pbo value
                                     shdslModeForBatchSet 1.3.6.1.4.1.890.1.5.5.6.8.3.2.3
Mode of the SHDSL port.
                                     shdslLineProfileForBatchSet 1.3.6.1.4.1.890.1.5.5.6.8.3.2.4
The SHDSL line profile.
                                     shdslAlarmProfileForBatchSet 1.3.6.1.4.1.890.1.5.5.6.8.3.2.5
The SHDSL alarm profile.
                                     shdslPboValueForBatchSet 1.3.6.1.4.1.890.1.5.5.6.8.3.2.6
Power backoff value of the SHDSL port.
                             pvc 1.3.6.1.4.1.890.1.5.5.6.8.4
                                 maxNumOfPvcs 1.3.6.1.4.1.890.1.5.5.6.8.4.1
The maximum number of PVCs which could be created on a port.
                                 pvcTable 1.3.6.1.4.1.890.1.5.5.6.8.4.2
This table includes PVC configuration.
                                     pvcEntry 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1
An entry in pvcTable.
                                         pvcVpi 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.1
VPI of the pvc.
                                         pvcVci 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.2
VCI of the pvc.
                                         pvcPvid 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.3
Default VID of the pvc.
                                         pvcPriority 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.5
802.1p default priority of the pvc.
                                         pvcProfileDS 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.6
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
                                         pvcRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.7
This object is used to create a new row or delete an existing row in this table.
                                         pvcProfileUS 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.8
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
                                 pvcUsRateLimitTable 1.3.6.1.4.1.890.1.5.5.6.8.4.4
This table defines the upstream rate limit for each PVC.
                                     pvcUsRateLimitEntry 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1
An entry in pvcUsRateLimitTable.
                                         pvcUsRateLimitEnable 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.1
Enable/disable upstream rate limit for a PVC.
                                         pvcUsRateLimit 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.2
Upstream rate limit in Kbps for a PVC.
                             ppvc 1.3.6.1.4.1.890.1.5.5.6.8.5
                                 maxNumOfPriorityPvcs 1.3.6.1.4.1.890.1.5.5.6.8.5.1
The maximum number of priority PVCs which could be created on a port.
                                 ppvcTable 1.3.6.1.4.1.890.1.5.5.6.8.5.2
This table includes priority PVC configuration.
                                     ppvcEntry 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1
An entry in ppvcTable.
                                         ppvcVpi 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.1
VPI of the ppvc.
                                         ppvcVci 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.2
VCI of the ppvc.
                                         ppvcPvid 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.3
Default VID of the ppvc.
                                         ppvcEncap 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.4
Encapsulation of the ppvc.
                                         ppvcPriority 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.5
802.1p default priority of the ppvc.
                                         ppvcRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.6
This object is used to create a new row or delete an existing row in this table.
                                 ppvcMemberTable 1.3.6.1.4.1.890.1.5.5.6.8.5.4
This table includes priority PVC member configuration.
                                     ppvcMemberEntry 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1
An entry in ppvcMemberTable.
                                         ppvcMemberVpi 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.1
VPI of the member ppvc.
                                         ppvcMemberVci 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.2
VCI of the member ppvc.
                                         ppvcMemberPriority 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.3
802.1p default priority of the member ppvc.
                                         ppvcMemberProfileDS 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.4
The profile of the member ppvc in DS side.
                                         ppvcMemberRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.5
This object is used to create a new row or delete an existing row in this table.
                                         ppvcMemberProfileUS 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.6
The profile of the member ppvc in US side.
                             portOperation 1.3.6.1.4.1.890.1.5.5.6.8.6
                                 portTarget 1.3.6.1.4.1.890.1.5.5.6.8.6.1
The managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
                                 portOps 1.3.6.1.4.1.890.1.5.5.6.8.6.2
The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port
                             rpvc 1.3.6.1.4.1.890.1.5.5.6.8.8
                                 rpvcGatewayTable 1.3.6.1.4.1.890.1.5.5.6.8.8.1
This table includes Routed Gateway configuration.
                                     rpvcGatewayEntry 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1
An entry in Routed Gateway table.
                                         rpvcGatewayIp 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.1
IP of RPVC gateway.
                                         rpvcGatewayVlanId 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.2
Vlan id send to this RPVC gateway.
                                         rpvcGatewayRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.3
This object is used to create a new row or delete an existing row in this table.
                                         rpvcGatewayPriority 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.4
802.1p p bit send to this RPVC gateway.
                                 rpvcTable 1.3.6.1.4.1.890.1.5.5.6.8.8.2
This table includes RPVC configuration.
                                     rpvcTableEntry 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1
An entry in rpvcTable.
                                         rpvcVpi 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.1
VPI of the rpvc.
                                         rpvcVci 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.2
VCI of the rpvc.
                                         rpvcDSProfile 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.3
The down stream profile of the rpvc.
                                         rpvcUSProfile 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.4
The up stream profile of the rpvc.
                                         rpvcIp 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.5
The IP of the rpvc.
                                         rpvcNetmask 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.6
The IP mask of the rpvc IP.
                                         rpvcGatewayIpAddress 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.7
The gateway IP of rpvc.
                                         rpvcRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.8
This object is used to create a new row or delete an existing row in this table.
                                 rpvcRouteDomainTable 1.3.6.1.4.1.890.1.5.5.6.8.8.3
This table includes RPVC route domain configuration.
                                     rpvcRouteDomainTableEntry 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1
An entry in rpvcRouteDomainTable.
                                         rpvcRouteDomainVpi 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.1
VPI of the rpvc.
                                         rpvcRouteDomainVci 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.2
VCI of the rpvc.
                                         rpvcRouteDomainIp 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.3
The route domain IP.
                                         rpvcRouteDomainNetmask 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.4
The IP mask of the route domain IP.
                                         rpvcRouteDomainRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.5
This object is used to create a new row or delete an existing row in this table.
                                 rpvcArpAgingTime 1.3.6.1.4.1.890.1.5.5.6.8.8.4
Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
                                 rpvcArpFlush 1.3.6.1.4.1.890.1.5.5.6.8.8.5
Flush the RPVC ARP proxy table.
                             dsBcastDisableTable 1.3.6.1.4.1.890.1.5.5.6.8.9
This table includes Down Stream Bcast configuration.
                                 dsBcastDisableEntry 1.3.6.1.4.1.890.1.5.5.6.8.9.1
An entry in Down Stream Bcast table.
                                     dsBcastDisableVlanId 1.3.6.1.4.1.890.1.5.5.6.8.9.1.1
downstream broadcast disabled vid.
                                     dsBcastDisableRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.9.1.2
This object is used to create a new row or delete an existing row in this table.
                             paepvc 1.3.6.1.4.1.890.1.5.5.6.8.10
                                   paepvcTable 1.3.6.1.4.1.890.1.5.5.6.8.10.1
This table includes PPPoAoE PVC configuration.
                                       paepvcEntry 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1
An entry of paepvcTable.
                                           paepvcVpi 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.1
VPI of the pvc.
                                           paepvcVci 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.2
VCI of the pvc.
                                           paepvcPvid 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.3
Default VID of the pvc.
                                           paepvcPriority 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.5
802.1p default priority of the pvc.
                                           paepvcProfileDS 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.6
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
                                           paepvcAcName 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.7
Access concentrator name.
                                           paepvcServiceName 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.8
Service name.
                                           paepvcHelloTime 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.9
The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
                                           paepvcRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.10
This object is used to create a new row or delete an existing row in this table.
                                           paepvcProfileUS 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.11
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
                             tlspvc 1.3.6.1.4.1.890.1.5.5.6.8.11
                                   tlspvcTable 1.3.6.1.4.1.890.1.5.5.6.8.11.1
This table includes Transparent LAN Service (TLS) PVC configuration.
                                       tlspvcEntry 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1
An entry of tlspvcTable.
                                           tlspvcVpi 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.1
VPI of the pvc.
                                           tlspvcVci 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.2
VCI of the pvc.
                                           tlspvcSvid 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.3
s-tag VLAN ID of the pvc.
                                           tlspvcSpriority 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.5
s-tag priority of the pvc.
                                           tlspvcProfileDS 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.6
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.
                                           tlspvcRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.7
This object is used to create a new row or delete an existing row in this table.
                                           tlspvcProfileUS 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.8
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.
                             gbond 1.3.6.1.4.1.890.1.5.5.6.8.51
                                   gbondGroupTable 1.3.6.1.4.1.890.1.5.5.6.8.51.1
A table containing the G.Bond configuration information for each bonding group of the device.
                                       gbondGroupEntry 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1
An entry of gbondTable.
                                           gbondGroupName 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.1
An administratively assigned string, which may be used to identify bonding group.
                                           gbondGroupPorts 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.2
The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. Byte 6~10:Reserved
                                           gbondGroupSid 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.3
This object indicates the sequence index mode of the bonding group.
                                           gbondGroupUpRate 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.4
The UP stream rate.
                                           gbondGroupDownRate 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.5
The DOWN stream rate.
                                           gbondGroupRowStatus 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.6
This object indicates the status of this entry.
                         switch 1.3.6.1.4.1.890.1.5.5.6.10
                               dscp 1.3.6.1.4.1.890.1.5.5.6.10.10
                                     dscpMappingTable 1.3.6.1.4.1.890.1.5.5.6.10.10.1
The table contains DSCP mapping configuration for the adsl and ethernet ports.
                                         dscpMappingEntry 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1
An entry of dscpMappingTable.
                                             dscpSrcCodePoint 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.1
The DSCP source code point used for mapping.
                                             dscpMapPriority 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.3
The mapping p bits that will replace the source p bits in the incoming packet.
                                     dscpPortTable 1.3.6.1.4.1.890.1.5.5.6.10.10.2
The table contains DSCP mapping configuration for the adsl and ethernet ports.
                                         dscpPortEntry 1.3.6.1.4.1.890.1.5.5.6.10.10.2.1
An entry of dscpPortTable.
                                             dscpStatusEnable 1.3.6.1.4.1.890.1.5.5.6.10.10.2.1.1
The DSCP port status.
                               vlanIsolation 1.3.6.1.4.1.890.1.5.5.6.10.12
                                     vlanIsolationTable 1.3.6.1.4.1.890.1.5.5.6.10.12.1
A table contains configuration of isolated VLAN.
                                         vlanIsolationEntry 1.3.6.1.4.1.890.1.5.5.6.10.12.1.1
An entry of vlanIsolationTable.
                                             vlanIsolationRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.12.1.1.1
Row status of the table used to create/delete an entry.
                               enetMtu 1.3.6.1.4.1.890.1.5.5.6.10.13
                                     enetMaxMtu 1.3.6.1.4.1.890.1.5.5.6.10.13.1
Sets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526.
                               dhcp 1.3.6.1.4.1.890.1.5.5.6.10.51
                                     dhcpRelayEnable 1.3.6.1.4.1.890.1.5.5.6.10.51.1
Enable/disable DHCP relay Option82 function.
                                     dhcpRelay82Table 1.3.6.1.4.1.890.1.5.5.6.10.51.2
A table that contains DHCP Relay configuration.
                                         dhcpRelay82Entry 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1
The entry of DHCP Relay table.
                                             dhcpRelay82PrimaryServer 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.1
The IP address of the DHCP Relay primary server.
                                             dhcpRelay82SecondaryServer 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.2
The IP address of the DHCP Relay secondary server.
                                             dhcpRelay82ActiveServer 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.3
The current active DHCP Relay server.
                                             dhcpRelay82Enable 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.4
Enable/disable DHCP relay and Option82 function.
                                             dhcpRelay82Info 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.5
User specific Option82 information.
                                             dhcpRelay82RelayMode 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.6
DHCP relay mode.
                                             dhcpRelay82Suboption2Enable 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.8
Enable/disable Option 82 sub-option 2.
                                             dhcpRelay82Suboption2Info 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.9
User specified information for Option 82 sub-option 2.
                                             dhcpRelay82EntryEnable 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.10
Enable/disable DHCP Relay
                                             dhcpRelay82EntryOptionMode 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.11
Option82 format.
                                     dhcpRelayOption82Sub1Info 1.3.6.1.4.1.890.1.5.5.6.10.51.3
User specific Option82 subOption1 (Agent circuit ID) information.
                                     maxNumOfDhcpRelay82Conf 1.3.6.1.4.1.890.1.5.5.6.10.51.4
The maximum number of rows that can be created in dhcpRelay82Table.
                                     dhcpRelayOption82Sub1Enable 1.3.6.1.4.1.890.1.5.5.6.10.51.5
Enable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.
                                     dhcpRelayOption82Sub2Info 1.3.6.1.4.1.890.1.5.5.6.10.51.6
User specific Option82 subOption2 (Agent Remote ID) information.
                                     dhcpRelayOption82Sub2Enable 1.3.6.1.4.1.890.1.5.5.6.10.51.7
Enable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.
                               macfilter 1.3.6.1.4.1.890.1.5.5.6.10.53
                                     macFilterPortTable 1.3.6.1.4.1.890.1.5.5.6.10.53.1
This table includes the status of mac filtering for each port.
                                         macFilterPortEntry 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1
An entry in macFilterPortTable.
                                             macFilterPortEnable 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.1
Enable/disable MAC filtering for the port.
                                             macFilterPortMacCount 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.2
The total number of MAC addresses allowed for the port.
                                             macFilterPortFilterMode 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.3
The mac filter mode (accept or deny) for the port.
                                     maxNumOfMacFiltersInSystem 1.3.6.1.4.1.890.1.5.5.6.10.53.2
The max number of mac filters supported in the system.
                                     maxNumOfMacFiltersPerPort 1.3.6.1.4.1.890.1.5.5.6.10.53.3
The max number of mac filters supported per port.
                                     currNumOfMacFiltersInSystem 1.3.6.1.4.1.890.1.5.5.6.10.53.4
The current number of mac filters in the system.
                                     macFilterTable 1.3.6.1.4.1.890.1.5.5.6.10.53.5
A table that contains the mac filter addresses.
                                         macFilterEntry 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1
The entry of macFilterTable.
                                             macFilterAddr 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.1
The mac address which can pass through or be rejected from the port.
                                             macFilterRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.2
The row status of the entry.
                                     macfilterBatchSet 1.3.6.1.4.1.890.1.5.5.6.10.53.6
                                         macfilterTarget 1.3.6.1.4.1.890.1.5.5.6.10.53.6.1
This managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis) Byte 2~3: 0, Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
                                         macfilterOps 1.3.6.1.4.1.890.1.5.5.6.10.53.6.2
The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter.
                                         macFilterMacCountForBatchSet 1.3.6.1.4.1.890.1.5.5.6.10.53.6.3
The total number of MAC addresses allowed for a port.
                                     ouiFilterTable 1.3.6.1.4.1.890.1.5.5.6.10.53.7
A table that contains the OUI filter addresses.
                                         ouiFilterEntry 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1
The entry of ouiFilterTable.
                                             ouiFilterAddr 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.1
The first three bytes of the mac address which can pass through or be rejected from the port.
                                             ouiFilterRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.2
The row status of the entry.
                                     maxNumOfOuiFiltersPerPort 1.3.6.1.4.1.890.1.5.5.6.10.53.8
The max number of OUI filters supported per port.
                                     ouiFilterPortTable 1.3.6.1.4.1.890.1.5.5.6.10.53.9
This table includes the status of oui filtering for each port.
                                         ouiFilterPortEntry 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1
An entry in macFilterPortTable.
                                             ouiFilterPortEnable 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.1
Enable/disable oui filtering for the port.
                                             ouiFilterPortFilterMode 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.2
The oui filter mode (accept or deny) for the port.
                               dhcpSnoop 1.3.6.1.4.1.890.1.5.5.6.10.55
                                     dhcpSnoopPortTable 1.3.6.1.4.1.890.1.5.5.6.10.55.1
This table includes DHCP snooping enable/disable for each port.
                                         dhcpSnoopPortEntry 1.3.6.1.4.1.890.1.5.5.6.10.55.1.1
An entry of dhcpSnoopPortTable.
                                             dhcpSnoopEnable 1.3.6.1.4.1.890.1.5.5.6.10.55.1.1.1
Enable/disable DHCP snooping for a port.
                                     dhcpSnoopTarget 1.3.6.1.4.1.890.1.5.5.6.10.55.2
This managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
                                     dhcpSnoopOps 1.3.6.1.4.1.890.1.5.5.6.10.55.3
The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
                                     dhcpStaticTable 1.3.6.1.4.1.890.1.5.5.6.10.55.4
This table defines DHCP static IP addresses.
                                         dhcpStaticEntry 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1
An entry of dhcpStaticTable.
                                             dhcpStaticIpAddr 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.1
The IP address which can pass through the port.
                                             dhcpStaticRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.2
Row status of the table entry.
                                     maxNumOfDhcpStaticIp 1.3.6.1.4.1.890.1.5.5.6.10.55.5
The maximum number of DHCP static IP addresses which can be created for a port.
                                     dhcpSnoopLan2lanEnable 1.3.6.1.4.1.890.1.5.5.6.10.55.6
Enable/disable DHCP snoop lan2lan function.
                               acl 1.3.6.1.4.1.890.1.5.5.6.10.56
                                     aclSetTable 1.3.6.1.4.1.890.1.5.5.6.10.56.1
aclsetTable.
                                         aclSetEntry 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1
An entry of aclSetTable.
                                             aclSetVpi 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.1
VPI value
                                             aclSetVci 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.2
VCI value
                                             aclSetProfileName 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.3
ACL Profile name
                                             aclSetRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.4
RowStatus of aclSetEntry
                                     aclProfileTable 1.3.6.1.4.1.890.1.5.5.6.10.56.2
aclProfileTable.
                                         aclProfileEntry 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1
An entry of aclProfileTable.
                                             aclProfileRuleName 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.1
Profile rule name
                                             aclProfileRuleNumber 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.2
The managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> smac <mac> (4), vlan <vid> dmac <mac> (5), smac <mac> dmac <mac> (6), vlan <vid> priority <priority> (7), etype <etype> (8), vlan <vid> (9), smac <mac> (10), dmac <mac> (11), priority <priority> (12), protocol <protocol> (13), {srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14)
                                             aclProfileActionNumber 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.3
Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
                                             aclProfileRuleParamMask 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.4
Profile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <eport>
                                             aclProfileRuleEtype 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.5
Profile rule etype
                                             aclProfileRuleVid 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.6
Profile rule vid
                                             aclProfileRuleSmac 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.7
Profile rule source MAC
                                             aclProfileRuleDmac 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.8
Profile rule destination MAC
                                             aclProfileRulePriority 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.9
Profile rule priority
                                             aclProfileRuleProtocol 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.10
Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
                                             aclProfileRuleSrcIP 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.11
Profile rule source IP
                                             aclProfileRuleSrcIPMask 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.12
The subnet mask of source IP mask
                                             aclProfileRuleDestIP 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.13
Profile rule source IP
                                             aclProfileRuleDestIPMask 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.14
The subnet mask of dest IP mask
                                             aclProfileRuleStartTos 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.15
Profile rule start type of service
                                             aclProfileRuleEndTos 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.16
Profile rule end type of service
                                             aclProfileRuleSrcStartPort 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.17
Profile rule source start port
                                             aclProfileRuleSrcEndPort 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.18
Profile rule source end port
                                             aclProfileRuleDestStartPort 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.19
Profile rule destination start port
                                             aclProfileRuleDestEndPort 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.20
Profile rule destination end port
                                             aclProfileActionRate 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.21
Profile action to replace to this rate
                                             aclProfileActionrvlan 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.22
Profile action to replace to this vlan
                                             aclProfileActionrpri 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.23
Profile action to replace to this priority
                                             aclProfileRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.24
The row status of the entry.
                               pppoeAgent 1.3.6.1.4.1.890.1.5.5.6.10.57
                                     pppoeAgentTable 1.3.6.1.4.1.890.1.5.5.6.10.57.1
A table that contains PPPoE DHCP Relay configuration.
                                         pppoeAgentEntry 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1
An entry of pppoeAgentTable.
                                             pppoeAgentEnable 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.1
Enable/disable DHCP relay and Option82 function.
                                             pppoeAgentInfo 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.2
User specific Option82 information.
                                             pppoeAgentRowStatus 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.3
Row status of the table entry.
                                             pppoeAgentOptionMode 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.4
Option82 format.
                                     maxNumOfPppoeAgentConf 1.3.6.1.4.1.890.1.5.5.6.10.57.2
The maximum number of rows that can be created in pppoeAgentTable.
                         sys 1.3.6.1.4.1.890.1.5.5.6.11
                               accessCtrl 1.3.6.1.4.1.890.1.5.5.6.11.5
                                   securedClientTable 1.3.6.1.4.1.890.1.5.5.6.11.5.2
A table that contains information about secured clients.
                                       securedClientEntry 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1
A list of secured client entry.
                                           securedClientIndex 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.1
The index of the entry.
                                           securedClientStartIp 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.2
The starting IP address of the secured client set.
                                           securedClientEndIp 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.3
The ending IP address of the secured client set.
                                           securedClientService 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.4
Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: ftp BIT 3: web BIT 4: icmp BIT 5: ssh BIT 6: snmp.
                                           securedClientEnable 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.5
Enable/disable the entry.
                               extAlarm 1.3.6.1.4.1.890.1.5.5.6.11.8
                                   extAlarmTable 1.3.6.1.4.1.890.1.5.5.6.11.8.1
A table that contains external alarm information.
                                       extAlarmEntry 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1
The entry of external alarm table.
                                           extAlarmIndex 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.1
The index of the entry.
                                           extAlarmname 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.2
The external alarm name.
                                           extAlarmstatus 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.3
Dispaly Normal or Alarm string
                               user 1.3.6.1.4.1.890.1.5.5.6.11.9
                                   userAuthMode 1.3.6.1.4.1.890.1.5.5.6.11.9.1
User authentication procsssing mode.
                                   userAuthServerIp 1.3.6.1.4.1.890.1.5.5.6.11.9.2
The IP address of the authentication server.
                                   userAuthServerPort 1.3.6.1.4.1.890.1.5.5.6.11.9.3
The port of the authentication server.
                                   userAuthServerSecret 1.3.6.1.4.1.890.1.5.5.6.11.9.4
The secret between the authentication server and the NE for authentication process.
                                   userTable 1.3.6.1.4.1.890.1.5.5.6.11.9.5
A table that contains user information.
                                       userEntry 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1
An entry of userTable.
                                           userName 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.1
The user name.
                                           userPassword 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.2
The user password.
                                           userPriviledge 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.3
The user priviledge to decide what operation the user can and cannot do.
                                           userRowStatus 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.4
The row status used to create or delete a user.
                                   userAuthDefaultPriviledge 1.3.6.1.4.1.890.1.5.5.6.11.9.6
The user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
                               sysSlotId 1.3.6.1.4.1.890.1.5.5.6.11.10
Device slot ID(0...255).
                               stdioTimeout 1.3.6.1.4.1.890.1.5.5.6.11.12
Set the stdio timeout, 0~360 minutes.
                         trap 1.3.6.1.4.1.890.1.5.5.6.12
                               object 1.3.6.1.4.1.890.1.5.5.6.12.1
                                   eqptAlarmInputIndex 1.3.6.1.4.1.890.1.5.5.6.12.1.2
The index of alarm input.
                                   eqptAlarmInputName 1.3.6.1.4.1.890.1.5.5.6.12.1.8
The Name of alarm input.
                                   sysMacAntiSpoofOrig 1.3.6.1.4.1.890.1.5.5.6.12.1.9
The Original port of Mac-AntiSpoofing.
                                   sysMacAntiSpoofNew 1.3.6.1.4.1.890.1.5.5.6.12.1.10
The New port of Mac-AntiSpoofing.
                                   sysMacAntiSpoofMAC 1.3.6.1.4.1.890.1.5.5.6.12.1.11
The MAC of Mac-AntiSpoofing.
                               equipment 1.3.6.1.4.1.890.1.5.5.6.12.3
                                   eqptHWMonitorFailure 1.3.6.1.4.1.890.1.5.5.6.12.3.1
Hardware monitor diagnosis is failed.
                               systrap 1.3.6.1.4.1.890.1.5.5.6.12.4
                                   sysMacAntiSpoofing 1.3.6.1.4.1.890.1.5.5.6.12.4.1
MAC Anti-spoofing.
                                   sysAlarmCutoffEnable 1.3.6.1.4.1.890.1.5.5.6.12.4.2
Alarm cutoff is activated.
                                   sysAlarmClearEnable 1.3.6.1.4.1.890.1.5.5.6.12.4.3
Alarm clear is activated.
                                   sysLoginFailure 1.3.6.1.4.1.890.1.5.5.6.12.4.4
User login is failed.
                         statistics 1.3.6.1.4.1.890.1.5.5.6.13
                               igmpQueryCntTotal 1.3.6.1.4.1.890.1.5.5.6.13.1
The total number of IGMP query messages received.
                               igmpReportCntTotal 1.3.6.1.4.1.890.1.5.5.6.13.2
The total number of IGMP report messages received.
                               igmpLeaveCntTotal 1.3.6.1.4.1.890.1.5.5.6.13.3
The total number of IGMP leave messages received.
                               igmpNumOfActiveGroups 1.3.6.1.4.1.890.1.5.5.6.13.4
The total number of IGMP learned groups.
                               igmpGroupTable 1.3.6.1.4.1.890.1.5.5.6.13.5
This table includes igmp group information.
                                   igmpGroupEntry 1.3.6.1.4.1.890.1.5.5.6.13.5.1
An entry in igmpGroupTable.
                                       igmpGroupvid 1.3.6.1.4.1.890.1.5.5.6.13.5.1.2
vlan id
                                       igmpGroupnumberOfMembers 1.3.6.1.4.1.890.1.5.5.6.13.5.1.3
number Of Members
                               igmpGroupPortTable 1.3.6.1.4.1.890.1.5.5.6.13.6
This table includes igmp Group port information.
                                   igmpGroupPortEntry 1.3.6.1.4.1.890.1.5.5.6.13.6.1
An entry in igmpGroupPortTable.
                                       igmpGroupPortvid 1.3.6.1.4.1.890.1.5.5.6.13.6.1.2
Igmp Group vid
                               igmpGroupTableV2 1.3.6.1.4.1.890.1.5.5.6.13.7
A table that displays IGMP learned group member information.
                                   igmpGroupEntryV2 1.3.6.1.4.1.890.1.5.5.6.13.7.1
An entry of igmpGroupTableV2.
                                       igmpGroupVid 1.3.6.1.4.1.890.1.5.5.6.13.7.1.1
The IGMP group VLAN ID.
                                       igmpGroupIp 1.3.6.1.4.1.890.1.5.5.6.13.7.1.2
The multicast IP address.
                                       igmpGroupNumOfMembers 1.3.6.1.4.1.890.1.5.5.6.13.7.1.3
The number of member ports in the group.
                                       igmpGroupMemberPorts 1.3.6.1.4.1.890.1.5.5.6.13.7.1.4
The member port list of the group.
                               igmpGroupPortTableV2 1.3.6.1.4.1.890.1.5.5.6.13.8
A table that displays IGMP joined groups in this port.
                                   igmpGroupPortEntryV2 1.3.6.1.4.1.890.1.5.5.6.13.8.1
An entry of igmpGroupPortTableV2.
                                       igmpGroupPortVid 1.3.6.1.4.1.890.1.5.5.6.13.8.1.1
The IGMP group VLAN ID.
                                       igmpGroupPortIp 1.3.6.1.4.1.890.1.5.5.6.13.8.1.2
The multicast IP address.
                                       igmpGroupPortSourceIp 1.3.6.1.4.1.890.1.5.5.6.13.8.1.3
The source IP address that joins the IGMP group.
                               igmpPortCtrlPduTable 1.3.6.1.4.1.890.1.5.5.6.13.9
A table that displays IGMP related counter values in this port.
                                   igmpPortCtrlPduEntry 1.3.6.1.4.1.890.1.5.5.6.13.9.1
An entry of igmpPortCtrlPduTable.
                                       igmpPortCtrlPduQueryCnt 1.3.6.1.4.1.890.1.5.5.6.13.9.1.1
The total number of IGMP query messages received in this port.
                                       igmpPortCtrlPduReportCnt 1.3.6.1.4.1.890.1.5.5.6.13.9.1.2
The total number of IGMP report messages received in this port.
                                       igmpPortCtrlPduLeaveCnt 1.3.6.1.4.1.890.1.5.5.6.13.9.1.3
The total number of IGMP leave messages received in this port.
                                       igmpPortNumOfActiveGroups 1.3.6.1.4.1.890.1.5.5.6.13.9.1.4
The total number of active IGMP groups in this port.
                               dhcpStats 1.3.6.1.4.1.890.1.5.5.6.13.11
                                     dhcpSnoopIpTable 1.3.6.1.4.1.890.1.5.5.6.13.11.1
This table shows the IP addresses and netmasks offered by the DHCP server.
                                         dhcpSnoopIpEntry 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1
An entry of dhcpSnoopIpTable.
                                             dhcpSnoopIp 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.1
The snooped IP address.
                                             dhcpSnoopMac 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.2
The snooped MAC address.
                                     dhcpSnoopCounterTable 1.3.6.1.4.1.890.1.5.5.6.13.11.2
This table shows the DHCP statistics.
                                         dhcpSnoopCounterEntry 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1
An entry of dhcpSnoopCounterTable.
                                             dhcpDiscovery 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.1
The total number of received DHCP server discovery packets.
                                             dhcpOffer 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.2
The total number of received DHCP server offer packets.
                                             dhcpRequest 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.3
The total number of received DHCP IP request packets.
                                             dhcpAck 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.4
The total number of received DHCP IP acknowledge packets.
                                             dhcpAckBySnoopFull 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.5
The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
                               paepvcStats 1.3.6.1.4.1.890.1.5.5.6.13.12
                                     paepvcSessionTable 1.3.6.1.4.1.890.1.5.5.6.13.12.1
This table shows the paepvc session statistics.
                                         paepvcSessionEntry 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1
An entry of paepvcSessionTable.
                                             paepvcSessionVpi 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.1
The PAEPVC VPI.
                                             paepvcSessionVci 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.2
The PAEPVC VCI.
                                             paepvcSessionState 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.3
The PAEPVC status.
                                             paepvcSessionId 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.4
The PAEPVC session ID.
                                             paepvcSessionUptime 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.5
The PAEPVC session uptime.
                                             paepvcSessionacname 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.6
Access concentrator name.
                                             paepvcSessionsrvcname 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.7
Service name.
                                     paepvcCountTable 1.3.6.1.4.1.890.1.5.5.6.13.12.2
This table shows the paepvc counters.
                                         paepvcCountEntry 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1
An entry of paepvcCountTable.
                                             paepvcCountVpi 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.1
The PAEPVC VPI.
                                             paepvcCountVci 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.2
The PAEPVC VCI.
                                             paepvcCountPppLcpCfgReqRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.3
The number of ppp lcp config-request received.
                                             paepvcCountPppLcpEchoReqRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.4
The number of ppp lcp echo-request received.
                                             paepvcCountPppLcpEchoReplyRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.5
The number of ppp lcp echo-reply received.
                                             paepvcCountPadiTx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.6
The number of pppoe padi transfered
                                             paepvcCountPadoRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.7
The number of pppoe pado received
                                             paepvcCountPadrTx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.8
The number of pppoe padr transfered
                                             paepvcCountPadsRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.9
The number of pppoe pads received
                                             paepvcCountPadtTx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.10
The number of pppoe padt transfered
                                             paepvcCountPadtRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.11
The number of pppoe padt received
                                             paepvcCountSrvcnameErrRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.12
The number of pppoe service name error received
                                             paepvcCountAcSystemErrRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.13
The number of pppoe access concentrator name error received
                                             paepvcCountGenericErrTx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.14
The number of pppoe generic error transfered
                                             paepvcCountGenericErrRx 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.15
The number of pppoe generic error received
                               macStats 1.3.6.1.4.1.890.1.5.5.6.13.13
                                     macDisplayTarget 1.3.6.1.4.1.890.1.5.5.6.13.13.1
This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the system 98: all subscriber ports 97: all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50).
                                     macTable 1.3.6.1.4.1.890.1.5.5.6.13.13.2
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
                                         macEntry 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1
An entry of macTable.
                                             macAddress 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.1
A unicast MAC address for which the bridge has forwarding and/or filtering information.
                                             macPort 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.2
The port from which the mac address has been learned.
                                             macStatus 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.3
The status of this entry.
                               shdslStats 1.3.6.1.4.1.890.1.5.5.6.13.14
                                     shdslLinePerfTable 1.3.6.1.4.1.890.1.5.5.6.13.14.1
The table displays SHDSL line performance.
                                         shdslLinePerfEntry 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1
An entry of shdslLinePerfTable.
                                             shdslLinePerfEs 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.1
Count of Errored Seconds (ES) on this endpoint since link up.
                                             shdslLinePerfSes 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.2
Count of Severely Errored Seconds (SES) on this endpoint since link up.
                                             shdslLinePerfCrc 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.3
Count of CRC anomalies on this endpoint since link up.
                                             shdslLinePerfLosws 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.4
Count of Loss of Sync Word (LOSW) Seconds on this endpoint since link up.
                                             shdslLinePerfUas 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.5
Count of Unavailable Seconds (UAS) on this endpoint since link up.
                                             shdslLinePerfSegmentAnomalies 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.6
Count of Segment Anomalies on this endpoint since link up.
                                             shdslLinePerfSegmentDefect 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.7
Count of Segment Defects on this endpoint since link up.
                               gbondStats 1.3.6.1.4.1.890.1.5.5.6.13.51
                                     gbondStateTable 1.3.6.1.4.1.890.1.5.5.6.13.51.1
A table containing the G.Bond configuration information for each bonding group of the device.
                                         gbondStateEntry 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1
An entry of gbondTable.
                                             gbondStateName 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.1
An administratively assigned string, which identifies the bonding group.
                                             gbondStateSid 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.2
This object indicates the sequence index mode of the bonding group.
                                             gbondStateUpRate 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.3
The current up stream rate.
                                             gbondStateDownRate 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.4
The current down stream rate.
                                             gbondStateMember 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.5
Indicate if the port is a member port of the bonding group. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.
                                             gbondStatelinkup 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.6
Indicate if the link status of port is bidirectional. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.
                                             gbondStateTx 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.7
Indicate if the link status of port is Tx only. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.
                                             gbondStateRx 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.8
Indicate if the link status of port is Rx only. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.
                                             gbondStatelinkdown 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.9
Indicate if the link status of the port is down. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5: Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.
                         clear 1.3.6.1.4.1.890.1.5.5.6.14
                               counterClearTarget 1.3.6.1.4.1.890.1.5.5.6.14.1
This managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
                               counterClearOps 1.3.6.1.4.1.890.1.5.5.6.14.2
The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3: clear port ATM counters BIT 4: clear pvc ATM counters BIT 5: clear DHCP counters BIT 6: clear IGMP counters BIT 7: clear IGMP port counters
                               counterClearVpi 1.3.6.1.4.1.890.1.5.5.6.14.3
VPI of the pvc whose counters would be cleared.
                               counterClearVci 1.3.6.1.4.1.890.1.5.5.6.14.4
VCI of the pvc whose counters would be cleared.