USR-OSPF-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: USR-OSPF-MIB
Download as:   
SNMPv2-SMI, SNMPv2-TC, USR-DEFINITIONS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usrOspf 1.3.6.1.4.1.429.4.63
The MIB module to describe the enterprise specific objects for the OSPF Protocol
       usrOspfExportPolicyTable 1.3.6.1.4.1.429.4.63.1
A set of export policies for OSPF.
           usrOspfExportPolicyEntry 1.3.6.1.4.1.429.4.63.1.1
Tok_String
               usrOspfExportPolicyNet 1.3.6.1.4.1.429.4.63.1.1.1
Specifies the network address which will match this policy.
               usrOspfExportPolicyMask 1.3.6.1.4.1.429.4.63.1.1.2
The network mask to be applied to the network address to specify a specific address or range of addresses for this policy.
               usrOspfExportPolicyRouteSource 1.3.6.1.4.1.429.4.63.1.1.3
Identifies the source of the routing information: local, static, or RIP.
               usrOspfExportPolicyAction 1.3.6.1.4.1.429.4.63.1.1.4
The action to take with this export policy. If the action is propagate, the route or routes described by the entry are included in the local OSPF updates if they exist in the routing table. If the action is ignore, the route or routes described are not advertised in the local OSPF updates.
               usrOspfExportPolicyMetric 1.3.6.1.4.1.429.4.63.1.1.5
The metric to be used when advertising the route(s) described by this policy. A metric value of 0 will cause the metric that is inserted into the AS External Links advertisement to be taken from the associated route entry in the routing table. For all other valid metric values, the value is directly inserted into the AS External Links advertisement.
               usrOspfExportPolicyMetricType 1.3.6.1.4.1.429.4.63.1.1.6
This variable describes the external type of metric that the export policy will advertise an external route as. Essentially this variable determines if the E Bit in an AS External Links Advertisement is set or not. A selection of external type II will cause the E bit to be set to 1. An external route tagged as an external type II indicates that the external cost to the route is all that should be associated with its cost metric. A route tagged as external type I indicates that the internal cost to the Autonomous System Border Router as well as the external cost of the route should be associated with the routes cost metric.
               usrOspfExportPolicyTag 1.3.6.1.4.1.429.4.63.1.1.7
The routing tag to be used when exporting the route(s) described by this policy entry.
               usrOspfExportPolicyStatus 1.3.6.1.4.1.429.4.63.1.1.8
The administrative status of the export policy entry.
       usrOspfImportPolicyTable 1.3.6.1.4.1.429.4.63.2
A set of OSPF import policies.
           usrOspfImportPolicyEntry 1.3.6.1.4.1.429.4.63.2.1
An entry for an OSPF Import Policy
               usrOspfImportPolicyNet 1.3.6.1.4.1.429.4.63.2.1.1
The network address of the destination or set of destinations for which this import policy is being defined.
               usrOspfImportPolicyMask 1.3.6.1.4.1.429.4.63.2.1.2
The network mask for the destination or set of destinations for which this import policy is being defined.
               usrOspfImportPolicyAction 1.3.6.1.4.1.429.4.63.2.1.3
The action to take with this import policy. If the action is accept, the route or routes described by the entry are included in the routing table when received in peer OSPF updates. If the action is ignore, the route or routes described are filtered from received OSPF updates.
               usrOspfImportPolicyRoutingPreference 1.3.6.1.4.1.429.4.63.2.1.4
The routing preference to associate with this route. A routing preference of routingPreference0 is more preferred than a preference equal to routingPreference1. A routing preference of routingPreference1 is more preferred than a preference equal to routingPreference2. A routing preference of routingPreference3 will cause a route to never be used in forwarding. It will be present in the routing table but will never make it into the forwarding table.
               usrOspfImportPolicyStatus 1.3.6.1.4.1.429.4.63.2.1.5
The administrative status of the import policy entry.
       usrOspfAreaTable 1.3.6.1.4.1.429.4.63.3
NOT IMPLEMENTED! Information describing the configured parame- ters and cumulative statistics of the routers attached areas.
           usrOspfAreaEntry 1.3.6.1.4.1.429.4.63.3.1
Information describing the configured parame- ters and cumulative statistics of one of the routers attached areas.
               usrOspfAreaId 1.3.6.1.4.1.429.4.63.3.1.1
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
               usrOspfAreaType 1.3.6.1.4.1.429.4.63.3.1.2
The areas support for determining if the Type is Stub or Transit.
       usrOspfVersion 1.3.6.1.4.1.429.4.63.4
The current software version of the OSPF Process.
       usrOspfConfigFileName 1.3.6.1.4.1.429.4.63.5
The name of a ConfigFile to read/write permanent database records.
       usrOspfCFMStatusFlag 1.3.6.1.4.1.429.4.63.6
Setting the value of this object to `save causes the values of the OSPF Group to be written out to the current config file. While the new data is being written, the config process will set the value of this flag to `saving. Any attempts to set the value while it is not `normal (i.e. the file is currently being written to the ConfigFile) will result in a badValue error being returned. Setting the value to `normal will result in no action.
       usrOspfDefaultAreaId 1.3.6.1.4.1.429.4.63.7
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. This area ID is used to create the default area when the ospf base is created
       usrOspfHostTable 1.3.6.1.4.1.429.4.63.8
The list of Hosts, and their metrics, that the router will advertise as host routes.
           usrOspfHostEntry 1.3.6.1.4.1.429.4.63.8.1
A metric to be advertised, for a given type of service, when a given host is reachable.
               usrOspfHostIpAddress 1.3.6.1.4.1.429.4.63.8.1.1
The IP Address of the Host.
               usrOspfHostIpTOS 1.3.6.1.4.1.429.4.63.8.1.2
The Type of Service of the route being config- ured.
               usrOspfHostIpMask 1.3.6.1.4.1.429.4.63.8.1.3
The IP Mask of the Host.
       usrOspfCryptoKeyTable 1.3.6.1.4.1.429.4.63.9
The list of OSPF Cryptographic Authentication Keys per OSPF Interface that will be used to generating/ verifying Cryptographic authentication.
           usrOspfCryptoKeyEntry 1.3.6.1.4.1.429.4.63.9.1
The information regarding a single OSPF Cryptographic Authentication Key.
               usrOspfIfIpAddress 1.3.6.1.4.1.429.4.63.9.1.1
The IP address of this OSPF interface.
               usrOspfAddressLessIf 1.3.6.1.4.1.429.4.63.9.1.2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
               usrOspfCryptoKeyId 1.3.6.1.4.1.429.4.63.9.1.3
The Key ID of this cryptographic key. This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
               usrOspfCryptoKey 1.3.6.1.4.1.429.4.63.9.1.4
The Cryptographic Authentication Key. If the Authentication Type is Cryptographic, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, usrOspfCryptoKey always returns an Octet String of length zero.
               usrOspfCryptoKeyStatus 1.3.6.1.4.1.429.4.63.9.1.5
This variable displays the status of the en- try. Setting it to invalid has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
               usrOspfCryptoAlgo 1.3.6.1.4.1.429.4.63.9.1.6
This field identifies the algorithm used to create message digest.
               usrOspfCryptoKeyStartAccept 1.3.6.1.4.1.429.4.63.9.1.7
The time that the router will start accepting packets that have been created with the given key. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January 1, 1995
               usrOspfCryptoKeyStartGenerate 1.3.6.1.4.1.429.4.63.9.1.8
The time that the router will start using the key for packet generation. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January 1, 1995
               usrOspfCryptoKeyStopGenerate 1.3.6.1.4.1.429.4.63.9.1.9
The time that the router will stop using the key for packet generation. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January 1, 1995. The value 0HFFFFFFFF stands for infinity.
               usrOspfCryptoKeyStopAccept 1.3.6.1.4.1.429.4.63.9.1.10
The time that the router will stop accepting packets that have been created with the given key. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January 1, 1995 The value 0HFFFFFFFF stands for infinity.
       usrOspfDefaultAreaStatus 1.3.6.1.4.1.429.4.63.10
This variable is used to delete the ospf default area.