USR-IP-CFG-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: USR-IP-CFG-MIB
Download as:   
SNMPv2-SMI, USR-DEFINITIONS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usrIpCfg 1.3.6.1.4.1.429.4.13
The commWorks enterprise defined MIB objects IP Configuration.
       usrIpCfgNetworkTable 1.3.6.1.4.1.429.4.13.1
This table is the same as the usrIpNetworkTable definied above, with the exception that it is indexed by the Network Name defined in the usrCfgNetworkTable. This table will be used only by the the Configuration File Manager process to load permament configuration file records for named networks at system boot time. Any attempt to set this table from either the CLI process or SNMP will fail.
           usrIpCfgNetworkEntry 1.3.6.1.4.1.429.4.13.1.1
A (conceptual) entry for one IP Network.
               usrIpCfgNetName 1.3.6.1.4.1.429.4.13.1.1.1
The name of this network. Network names can either be assigned by a network administrator when the Network is created. Or it will generated by the Configuration Process when it adds the network to its internal table.
               usrIpCfgNetBcastAddr 1.3.6.1.4.1.429.4.13.1.1.4
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
               usrIpCfgNetReasmMaxSize 1.3.6.1.4.1.429.4.13.1.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
               usrIpCfgNetRoutingProtocol 1.3.6.1.4.1.429.4.13.1.1.6
The routing protocol to be operated on this IP network. Currently, there are none, rip version 1 and rip version 2.
               usrIpCfgNetSendDefaultRoutePolicy 1.3.6.1.4.1.429.4.13.1.1.7
Allows disabling or enabling of the send default route RIP policy. This policy is enabled by default.
               usrIpCfgNetSendRoutesPolicy 1.3.6.1.4.1.429.4.13.1.1.8
Allows disabling or enabling of the send routes RIP policy. This policy is enabled by default.
               usrIpCfgNetSendSubnetsOnlyPolicy 1.3.6.1.4.1.429.4.13.1.1.9
Allows disabling or enabling of the send subnets only RIP policy. This policy is enabled by default.
               usrIpCfgNetAcceptDefaultRoutePolicy 1.3.6.1.4.1.429.4.13.1.1.10
Allows disabling or enabling of the accept default route RIP policy. This policy is disabled by default.
               usrIpCfgNetSilentPolicy 1.3.6.1.4.1.429.4.13.1.1.11
Allows disabling or enabling of the silent policy. This policy is disabled by default.
               usrIpCfgNetSplitHorizonPolicy 1.3.6.1.4.1.429.4.13.1.1.12
Allows disabling or enabling of the split horizon RIP policy. This policy is enabled by default.
               usrIpCfgNetPoisonReversePolicy 1.3.6.1.4.1.429.4.13.1.1.13
Allows disabling or enabling of the poison reverse RIP policy. This policy is enabled by default.
               usrIpCfgNetFlashUpdatePolicy 1.3.6.1.4.1.429.4.13.1.1.14
Allows disabling or enabling of the flash update RIP policy. This policy is enabled by default.
               usrIpCfgNetSimpleAuthenPolicy 1.3.6.1.4.1.429.4.13.1.1.15
Allows disabling or enabling of the simple authentication RIP policy. This policy is valid for RIPV2 only and is enabled by default when RIPV2 is selected as the routing protocol.
               usrIpCfgNetSendRipV1CompatPolicy 1.3.6.1.4.1.429.4.13.1.1.16
Allows disabling or enabling of the send RipV1 compatible policy. This policy is enabled by default.
               usrIpCfgNetRcvRipV1Policy 1.3.6.1.4.1.429.4.13.1.1.17
Allows disabling or enabling of the receive RipV1 policy. This policy is enabled by default.
               usrIpCfgNetRcvRipV2Policy 1.3.6.1.4.1.429.4.13.1.1.18
Allows disabling or enabling of the receive RipV2 policy. This policy is enabled by default.
               usrIpCfgNetRip2AuthKey 1.3.6.1.4.1.429.4.13.1.1.19
this variable defines the authentication key for ip rip2. when this varialbe is set, by default, the authentication type is also set to simple.
               usrIpCfgNetRoutingMetric 1.3.6.1.4.1.429.4.13.1.1.20
The routing metric for using this IP network.
               usrIpCfgNetExportMetric 1.3.6.1.4.1.429.4.13.1.1.21
The metric for advertising routes through this IP network.
               usrIpCfgNetRoutingNone 1.3.6.1.4.1.429.4.13.1.1.22
Specifies that no routing protocol will be operating on this IP network.
               usrIpCfgNetRoutingRipV1 1.3.6.1.4.1.429.4.13.1.1.23
Specifies that the RIPv1 routing protocol will be operating on this IP network.
               usrIpCfgNetRoutingRipV2 1.3.6.1.4.1.429.4.13.1.1.24
Specifies that the RIPv2 routing protocol will be operating on this IP network.
               usrIpCfgNetRoutingOspf 1.3.6.1.4.1.429.4.13.1.1.25
Specifies that the OSPF routing protocol will be operating on this IP network.