USR-GWCWAN-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: USR-GWCWAN-MIB
Download as:   
SNMPv2-SMI, SNMPv2-TC, USR-DEFINITIONS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usrGwcwan 1.3.6.1.4.1.429.4.58
The commWorks enterprise defined MIB objects for the Network Element.
       usrGwcwanIfTable 1.3.6.1.4.1.429.4.58.1
A list of Gwcwan interface entries.
           usrGwcwanIfEntry 1.3.6.1.4.1.429.4.58.1.1
Parameter values for a Gwcwan interfaces.
               usrGwcwanIfIndex 1.3.6.1.4.1.429.4.58.1.1.1
The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               usrGwcwanIfName 1.3.6.1.4.1.429.4.58.1.1.2
The textual name of the interface. It is of the form wan:# for physical interfaces and of the form wan:#/linkname for logicalinterfaces where # is the physical interface this logical interface resides on, and linkname is assigned by the administrator.
               usrGwcwanIfType 1.3.6.1.4.1.429.4.58.1.1.3
This helps determine the type of physical interface / NIC Type/ WAN Driver Type.
       usrGwcwanV35IfTable 1.3.6.1.4.1.429.4.58.2
A list of Gwcwan V35 virtual interface entries.
           usrGwcwanV35IfEntry 1.3.6.1.4.1.429.4.58.2.1
Parameter values for V35 Gwcwan virtual interface.
               usrGwcwanV35IfIndex 1.3.6.1.4.1.429.4.58.2.1.1
The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               usrGwcwanV35ClockRefMode 1.3.6.1.4.1.429.4.58.2.1.2
Valid only when usrGwcwanIfType is usrGwcwanV35. The clock ref mode of this v35 interface
               usrGwcwanV35ClockInvertedMode 1.3.6.1.4.1.429.4.58.2.1.3
Valid only when usrGwcwanIfType is usrGwcwanV35. The Clock inverted mode
               usrGwcwanV35FlagIdlePattern 1.3.6.1.4.1.429.4.58.2.1.4
Valid only when usrGwcwanIfType is usrGwcwanV35. This mib is an addon to rfc1659 rs232SyncPortIdlePattern mib. rfc1659 does not support idle pattern as flag (7F). If this flag is set to flagIdlePattern, then Pilgrim sets wapi idle pattern to flag. Other wise, Pilgrim sets wapi according the value set in rs232SyncPortIdlePattern.
               usrGwcwanV35PortType 1.3.6.1.4.1.429.4.58.2.1.5
The ports hardware type. This is actually a subset of rs232PortType parameter defined by RFC1659. It was necessary to re-define this variable since Write access is not allowed to the parameter defined by RFC1659.
       usrGwcwanT1E1IfTable 1.3.6.1.4.1.429.4.58.3
A list of Gwcwan T1E1 virtual interface entries.
           usrGwcwanT1E1IfEntry 1.3.6.1.4.1.429.4.58.3.1
Parameter values for T1E1 Gwcwan virtual interface.
               usrGwcwanT1E1IfIndex 1.3.6.1.4.1.429.4.58.3.1.1
The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               usrGwcwanDS1CableLen 1.3.6.1.4.1.429.4.58.3.1.2
Valid only when usrGwcwanIfType is usrGwcwanDS1. The cable length of DS1 interface. If the interface is long haul, use usrGwcwanDS1CableLenLongHaul. Otherwise, use specified cable length.
               usrGwcwanDS1LineBuildout 1.3.6.1.4.1.429.4.58.3.1.3
Valid only when usrGwcwanIfType is usrGwcwanDS1. The line build out of DS1 interface.
       usrGwcwanWSOCKIfTable 1.3.6.1.4.1.429.4.58.4
A list of Gwcwan WSOCK virtual interface entries.
           usrGwcwanWSOCKIfEntry 1.3.6.1.4.1.429.4.58.4.1
Parameter values for WSOCK Gwcwan virtual interface.
               usrGwcwanWSOCKIfIndex 1.3.6.1.4.1.429.4.58.4.1.1
The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               usrGwcwanIPConnType 1.3.6.1.4.1.429.4.58.4.1.2
Valid only when usrGwcwanIfType is usrGwcwanWSOCK. The type of IP service to use to make the sockets connection (UDP or TCP).
               usrGwcwanRemoteIp 1.3.6.1.4.1.429.4.58.4.1.3
Valid only when usrGwcwanIfType is usrGwcwanWSOCK. The remote IP address this virtual port sends to.
               usrGwcwanRemotePort 1.3.6.1.4.1.429.4.58.4.1.4
Valid only when usrGwcwanIfType is usrGwcwanWSOCK. The remote UDP/IP port this virtual port sends to.
               usrGwcwanLocalPort 1.3.6.1.4.1.429.4.58.4.1.5
Valid only when usrGwcwanIfType is usrGwcwanWSOCK. The local UDP/IP port this virtual port listens to.
       usrGwcwanT1E1TrapEnaTable 1.3.6.1.4.1.429.4.58.5
A trap enable table that defines a column for every trap that a DS1 entity can generate.
           usrGwcwanT1E1TrapEnaEntry 1.3.6.1.4.1.429.4.58.5.1
There is one entry in this table for every DS1 that exists in the chassis.
               usrGwcwanT1E1TrapEnaDS1Index 1.3.6.1.4.1.429.4.58.5.1.1
The value of ifIndex for the DS1/ES1 port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               usrGwcwanT1E1TrapEnaYellowAlarm 1.3.6.1.4.1.429.4.58.5.1.2
Enable the generation of an SNMP trap for Far-End Loss of Frame condition (signaled by a received Yellow Alarm) on the specified DS1. This corresponds to dsx1RcvFarEndLOF bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaSndYellowAlarm 1.3.6.1.4.1.429.4.58.5.1.3
Enable the generation of an SNMP trap for Near End Sending Yellow Alarm condition on the specified DS1. This corresponds to dsx1XmtFarEndLOF bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaAlarmIndSignal 1.3.6.1.4.1.429.4.58.5.1.4
Enable the generation of an SNMP trap for Far End Sending Alarm Indication Signal condition on the specified DS1. This corresponds to dsx1RcvAIS bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaSndAlarmIndSignal 1.3.6.1.4.1.429.4.58.5.1.5
Enable the generation of an SNMP trap for Near End Sending Alarm Indication Signal condition on the specified DS1. This corresponds to dsx1XmtAIS bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaRedAlarm 1.3.6.1.4.1.429.4.58.5.1.6
Enable the generation of an SNMP trap for Near End Loss Of Frame (in red alarm condition) condition on the specified DS1. This corresponds to dsx1LossOfFrame bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaLossOfSignal 1.3.6.1.4.1.429.4.58.5.1.7
Enable the generation of an SNMP trap for Near End Loss Of Signal condition on the specified DS1. This corresponds to dsx1LossOfSignal bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaloopBack 1.3.6.1.4.1.429.4.58.5.1.8
Enable the generation of an SNMP trap for Near End loopback condition on the specified DS1. This corresponds to dsx1LoopbackState bit in dsx1LineStatus variable
               usrGwcwanT1E1TrapEnaRcvTestCode 1.3.6.1.4.1.429.4.58.5.1.9
Enable the generation of an SNMP trap for Near End test code condition on the specified DS1. This corresponds to dsx1RcvTestCode bit in dsx1LineStatus variable
       usrGwcwanTraps 1.3.6.1.4.1.429.4.58.6
           usrGwcwanT1E1YellowAlarm 1.3.6.1.4.1.429.4.58.6.1
This trap is generated for an active Far-End Loss of Frame condition (signaled by a received Yellow Alarm) on the specified DS1.
           usrGwcwanT1E1ClrYellowAlarm 1.3.6.1.4.1.429.4.58.6.2
This trap is generated when Far-End Loss of Frame condition (signaled by a received Yellow Alarm) clears on the specified DS1.
           usrGwcwanT1E1SndYellowAlarm 1.3.6.1.4.1.429.4.58.6.3
This trap is generated for an active Near End Sending Yellow Alarm condition on the specified DS1.
           usrGwcwanT1E1ClrSndYellowAlarm 1.3.6.1.4.1.429.4.58.6.4
This trap is generated when Near End Sending Yellow Alarm condition clears on the specified DS1.
           usrGwcwanT1E1AlarmIndSignal 1.3.6.1.4.1.429.4.58.6.5
This trap is generated for an active Far End Sending Alarm Indication Signal condition on the specified DS1.
           usrGwcwanT1E1ClrAlarmIndSignal 1.3.6.1.4.1.429.4.58.6.6
This trap is generated when Far End Sending Alarm Indication Signal condition clears on the specified DS1.
           usrGwcwanT1E1SndAlarmIndSignal 1.3.6.1.4.1.429.4.58.6.7
This trap is generated for an active Near End Sending Alarm Indication Signal condition on the specified DS1.
           usrGwcwanT1E1ClrSndAlarmIndSignal 1.3.6.1.4.1.429.4.58.6.8
This trap is generated when Near End Sending Alarm Indication Signal condition clears on the specified DS1.
           usrGwcwanT1E1RedAlarm 1.3.6.1.4.1.429.4.58.6.9
This trap is generated for an active Near End Loss Of Frame (in red alarm condition) condition on the specified DS1.
           usrGwcwanT1E1ClrRedAlarm 1.3.6.1.4.1.429.4.58.6.10
This trap is generated when Near End Loss Of Frame (in red alarm condition) condition clears on the specified DS1.
           usrGwcwanT1E1LossOfSignal 1.3.6.1.4.1.429.4.58.6.11
This trap is generated for an active Near End Loss Of Signal condition on the specified DS1.
           usrGwcwanT1E1ClrLossOfSignal 1.3.6.1.4.1.429.4.58.6.12
This trap is generated when Near End Loss Of Signal condition clears on the specified DS1.
           usrGwcwanT1E1loopBack 1.3.6.1.4.1.429.4.58.6.13
This trap is generated for an active Near End loopback condition on the specified DS1.
           usrGwcwanT1E1ClrloopBack 1.3.6.1.4.1.429.4.58.6.14
This trap is generated when Near End loopback condition clears on the specified DS1.
           usrGwcwanT1E1RcvTestCode 1.3.6.1.4.1.429.4.58.6.15
This trap is generated for an active Near End test code condition on the specified DS1.
           usrGwcwanT1E1ClrRcvTestCode 1.3.6.1.4.1.429.4.58.6.16
This trap is generated when Near End test code condition clears on the specified DS1.