USR-GWCBSP-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: USR-GWCBSP-MIB
Download as:   
SNMPv2-SMI, USR-DEFINITIONS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usrGWCBSP 1.3.6.1.4.1.429.4.38
The commWorks enterprise defined MIB objects for the GWC BSP specific platform
       usrGWCBSPProductCode 1.3.6.1.4.1.429.4.38.1
The Code number assigned for the product
       usrGWCBSPHWVersion 1.3.6.1.4.1.429.4.38.2
Hardware version number
       usrGWCBSPSerialNumber 1.3.6.1.4.1.429.4.38.3
Serial number of the product
       usrGWCBSPCardID 1.3.6.1.4.1.429.4.38.4
Assigned card ID
       usrGWCBSPFeatureKey 1.3.6.1.4.1.429.4.38.5
Bitmap of the features supported in the product
       usrGWCBSPNICID 1.3.6.1.4.1.429.4.38.6
NIC card Identifier
       usrGWCBSPNICName 1.3.6.1.4.1.429.4.38.7
NIC card name
       usrGWCBSPNACID 1.3.6.1.4.1.429.4.38.8
NAC card Identifier
       usrGWCBSPNACName 1.3.6.1.4.1.429.4.38.9
NAC Card Name
       usrGWCBSPCPUType 1.3.6.1.4.1.429.4.38.10
CPU of the product
       usrGWCBSPCPUSpeed 1.3.6.1.4.1.429.4.38.11
The speed in Mhz in which the CPU runs
       usrGWCBSPBootMode 1.3.6.1.4.1.429.4.38.12
This variable decides the booting type. The possible booting types are FLASH ( the boot image is taken from the flash memory) or NETWORK (the boot image is downloaded from the network
       usrGWCBSPIPConfigSource 1.3.6.1.4.1.429.4.38.13
The IP configuration source
       usrGWCBSPIPTable 1.3.6.1.4.1.429.4.38.14
IP Interface Table
             usrGWCBSPIPEntry 1.3.6.1.4.1.429.4.38.14.1
IP interface Table
                 usrGWCBSPInterfaceIndex 1.3.6.1.4.1.429.4.38.14.1.1
The boot interface of the product. The possible values are eth:1 or eth:2
                 usrGWCBSPTFTPServer 1.3.6.1.4.1.429.4.38.14.1.2
TFTP server used to down load the application image or upload crashdump file
                 usrGWCBSPIPAddress 1.3.6.1.4.1.429.4.38.14.1.3
IP address of the selected interface
                 usrGWCBSPIPGateway 1.3.6.1.4.1.429.4.38.14.1.4
IP gateway for the selected interface
                 usrGWCBSPNetMask 1.3.6.1.4.1.429.4.38.14.1.5
IP netmask of the selected interface
                 usrGWCBSPCrashDumpFile 1.3.6.1.4.1.429.4.38.14.1.6
File name to which the crashdump will be uploaded - maximum length is 127 chars + terminator
                 usrGWCBSPNetworkFile 1.3.6.1.4.1.429.4.38.14.1.7
The download application image file name - the maximum length is 127 characters + terminator
                 usrGWCBSPTFTPStatus 1.3.6.1.4.1.429.4.38.14.1.8
TFTP download config type
       usrGWCBSPCrashEnable 1.3.6.1.4.1.429.4.38.15
Says whether the crashupload option is Enabled or Disabled
       usrGWCBSPDiag 1.3.6.1.4.1.429.4.38.16
To enable or disable Mfg Diagnostics
       usrGWCBSPDipSwitches 1.3.6.1.4.1.429.4.38.17
The current DIP switch settings
       usrGWCBSPCrashDump 1.3.6.1.4.1.429.4.38.18
Information about the previous crash - not accessible via SNMP, CLI only.
       usrGWCBSPInterface 1.3.6.1.4.1.429.4.38.19
The boot interface of the product. The possible values are eth:1 or eth:2
       usrGWCBSPCrashDumpReset 1.3.6.1.4.1.429.4.38.20
To Reset the Last Crash Dump
       usrGWCBSPCommandLineParameters 1.3.6.1.4.1.429.4.38.21
Contains the command line parameters which are passed to the router at startup
       usrGWCBSPCFMStatusFlag 1.3.6.1.4.1.429.4.38.22
This variable controls saving and loading of configuration information for the bsp manager Module. The value can be set to either save or load by a management station. The other values indicate if any configuration operation and what type is in progress.
       usrGWCBSPKernelVersion 1.3.6.1.4.1.429.4.38.23
The Kernel Version