USR-ATMCFG-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED

Home	MIB: USR-ATMCFG-MIB
Download as:		SNMPv2-SMI, USR-DEFINITIONS-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
usrAtmCfgTable	1.3.6.1.4.1.429.4.52.1			USR Specific ATM Config table.
usrAtmCfgEntry	1.3.6.1.4.1.429.4.52.1.1			An entry in the Atm Configuration table.
usrAtmIfName	1.3.6.1.4.1.429.4.52.1.1.1			This object is the identifier of a ATM (AAL) Interface on a managed device.
usrSigAdminStatus	1.3.6.1.4.1.429.4.52.1.1.2			The desired state of Signalling on a desired interface. The interface name, specified by usrAtmIfName represents the AAL interface to enable or disable signalling on. If the state is enable then signalling messages will flow on the interface. If the state is changed to disable, then all signalling messages will stop on the interface.
usrSigOperStatus	1.3.6.1.4.1.429.4.52.1.1.3			The actual state of Signalling on a desired interface. This state should follow the state set by usrSigAdminStatus.
usrIlmiAdminStatus	1.3.6.1.4.1.429.4.52.1.1.4			The desired state of ILMI on a desired interface. The interface name, specified by usrAtmIfName represents the AAL interface to enable or disable ILMI on. If the state is enable then ILMI messages will flow on the interface. If the state is changed to disable, then all ILMI messages will stop on the interface.
usrIlmiOperStatus	1.3.6.1.4.1.429.4.52.1.1.5			The actual state of ILMI on a desired interface. This state should follow the state set by usrSigAdminStatus.