SENAO-EOR7550-MIB: View SNMP OID List / Download MIB

VENDOR: SENAO INTERNATIONAL CO.


 Home MIB: SENAO-EOR7550-MIB
Download as:   
SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 senao 1.3.6.1.4.1.14125
             eor7550 1.3.6.1.4.1.14125.101
                     entSystem 1.3.6.1.4.1.14125.101.1
                         entPassword 1.3.6.1.4.1.14125.101.1.2
Administration password
                         entSysModel 1.3.6.1.4.1.14125.101.1.3
System model
                         entSysMode 1.3.6.1.4.1.14125.101.1.4
System mode, 0:AP router, 1:Repeater, 2: AP bridge, 3: Client bridge, 4: Client router, 5: WDS bridge, 6: AP router repeater, 7: WDS repeater, 8: WDS router repeater
                         entSysUpTime 1.3.6.1.4.1.14125.101.1.5
System uptime
                         entHwVersion 1.3.6.1.4.1.14125.101.1.6
The version of the hardware
                         entSN 1.3.6.1.4.1.14125.101.1.7
Serial Number
                         entKenelVersion 1.3.6.1.4.1.14125.101.1.8
The version of the kernel
                         entAppVersion 1.3.6.1.4.1.14125.101.1.9
The version of the system application
                         entReset 1.3.6.1.4.1.14125.101.1.10
Setting this attribute TRUE causes the AP rebooted
                         entResetToDefault 1.3.6.1.4.1.14125.101.1.11
Setting this attribute TRUE will Reboot the system and change settings to factory default
                         entApplyModules 1.3.6.1.4.1.14125.101.1.12
Setting this attribute TRUE will apply the changed modules to reload
                     entLAN 1.3.6.1.4.1.14125.101.2
                         entLANIP 1.3.6.1.4.1.14125.101.2.1
LAN IP address
                         entLANSubnetMask 1.3.6.1.4.1.14125.101.2.2
LAN subnet mask
                         entSTPEnable 1.3.6.1.4.1.14125.101.2.3
Set this attribute TUUE will enable 802.1d Spanning Tree.
                         entDHCPEnable 1.3.6.1.4.1.14125.101.2.4
When system mode is not 1(Repeater) and 5(WDS bridge), set this attribute TUUE will enable the DHCP server function of device
                         entIPPoolStart 1.3.6.1.4.1.14125.101.2.5
TWhen system mode is not 1(Repeater) and 5(WDS bridge), set the start address of DHCP IP pool
                         entIPPoolEnd 1.3.6.1.4.1.14125.101.2.6
When system mode is not 1(Repeater) and 5(WDS bridge), set the end address of DHCP IP pool
                         entIPLeaseTime 1.3.6.1.4.1.14125.101.2.7
When system mode is not 1(Repeater) and 5(WDS bridge), the time period client can have the IP address assigned by DHCP server 0(half hour), 1(one hour) 2(two hours), 3(half day), 4(one day), 5(two days), 6(one week), 7(two weeks), 8(forever)
                     entWAN 1.3.6.1.4.1.14125.101.3
                         entRouterEnable 1.3.6.1.4.1.14125.101.3.1
Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TUUE will enable the router.
                     entMacFilter 1.3.6.1.4.1.14125.101.4
                         entLanMacFilteringEnable 1.3.6.1.4.1.14125.101.4.1
Set this attribute TUUE will enable the LAN MAC filtering
                         entLanMacFilteringMode 1.3.6.1.4.1.14125.101.4.2
The mode of LAN MAC filtering can be 0(white list), 1(black list)
                         entLanMacFilterTable 1.3.6.1.4.1.14125.101.4.3
This table provides one row for each LAN MAC filtering. Each row contains the enterprise LAN MAC filtering table for that LAN MAC filtering.
                             entLanMacFilterEntry 1.3.6.1.4.1.14125.101.4.3.1
An entry in the entLanMacFilterTable.
                                 entMacAddressIndex 1.3.6.1.4.1.14125.101.4.3.1.1
The auxiliary variable used to identify instances of columnar objects in the LAN MAC Filtering Table
                                 entMacAddress 1.3.6.1.4.1.14125.101.4.3.1.2
MAC address list in the LAN MAC filtering table
                                 entMacFilteringValid 1.3.6.1.4.1.14125.101.4.3.1.3
The validity status of each corresponding MAC address in LAN MAC filtering table
                     entRalinkWlan 1.3.6.1.4.1.14125.101.5
                         entWlanCommonInfo 1.3.6.1.4.1.14125.101.5.1
                             entRadio 1.3.6.1.4.1.14125.101.5.1.2
Set this attribute TUUE will enable the radio
                             entNDataRate 1.3.6.1.4.1.14125.101.5.1.8
This attribute specifies the 11n data rate
                             entChannelBandwidth 1.3.6.1.4.1.14125.101.5.1.14
This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ)
                         entWlanESSIDInfoTable 1.3.6.1.4.1.14125.101.5.2
This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information.
                             entWlanESSIDInfoEntry 1.3.6.1.4.1.14125.101.5.2.1
An entry in the entWlanESSIDInfoTable.
                         entWlanWepInfoTable 1.3.6.1.4.1.14125.101.5.3
This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information.
                             entWlanWepInfoEntry 1.3.6.1.4.1.14125.101.5.3.1
An entry in the entWlanWepInfoTable.
                         entWlanWPAInfoTable 1.3.6.1.4.1.14125.101.5.4
This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information.
                             entWlanWPAInfoEntry 1.3.6.1.4.1.14125.101.5.4.1
An entry in the entWlanWPAInfoTable.
                         ent802dot1xInfoTable 1.3.6.1.4.1.14125.101.5.5
This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information.
                             ent802dot1xInfoEntry 1.3.6.1.4.1.14125.101.5.5.1
An entry in the ent802dot1xInfoTable.
                     entSNMP 1.3.6.1.4.1.14125.101.6
                         entSNMPStatus 1.3.6.1.4.1.14125.101.6.1
The status of current SNMP agent.0:disable, 1:Enable
                         entSNMPVerType 1.3.6.1.4.1.14125.101.6.2
The version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3
                         entSNMPCommunityTable 1.3.6.1.4.1.14125.101.6.3
This table provides one row for each SNMP community. Each row contains the enterprise SNMP community table for that SNMP community.
                             entSNMPCommunityEntry 1.3.6.1.4.1.14125.101.6.3.1
An entry in the entSNMPCommunityTable.
                                 entSNMPCommunityIndex 1.3.6.1.4.1.14125.101.6.3.1.1
The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table
                                 entSNMPCommunityName 1.3.6.1.4.1.14125.101.6.3.1.2
The community name used to access SNMP device.
                                 entSNMPCommunityType 1.3.6.1.4.1.14125.101.6.3.1.3
The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table
                                 entSNMPCommunityValid 1.3.6.1.4.1.14125.101.6.3.1.4
Display the validity information of corresponding community index
                         entSNMPTrap 1.3.6.1.4.1.14125.101.6.4
                             entTrapStatus 1.3.6.1.4.1.14125.101.6.4.1
The trap status of current SNMP agent.0:disable, 1:Enable
                             entTrapVer 1.3.6.1.4.1.14125.101.6.4.2
The trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3
                             entTrapReceiverIPAddress 1.3.6.1.4.1.14125.101.6.4.3
Specify the IP address(host) to receive the trap report
                             entTrapReceiverCommunityName 1.3.6.1.4.1.14125.101.6.4.4
Specify the community name for SNMP manager to receive the trap report
                     entAthWlan 1.3.6.1.4.1.14125.101.7
                         entAthWlanCommonInfo 1.3.6.1.4.1.14125.101.7.1
                             entOpMode 1.3.6.1.4.1.14125.101.7.1.1
Get op mode: 0(AP), 1(Client bridge), 2(Client router), 3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station), 7(Disable)
                             entBand 1.3.6.1.4.1.14125.101.7.1.4
The wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g)
                             entESSIDNum 1.3.6.1.4.1.14125.101.7.1.5
Only when op mode for Atheros is 0(AP), set the Number of multiple ESSID
                             entChannel 1.3.6.1.4.1.14125.101.7.1.6
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The current operating frequency channel
                             entDataRate 1.3.6.1.4.1.14125.101.7.1.7
This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps)
                             entTxPower 1.3.6.1.4.1.14125.101.7.1.9
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%)
                             entBeaconInterval 1.3.6.1.4.1.14125.101.7.1.10
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the number of TU that a station shall use for scheduling Beacon transmissions
                             entDTIMPeriod 1.3.6.1.4.1.14125.101.7.1.11
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the number of beacon intervals
                             entFragmentationThreshold 1.3.6.1.4.1.14125.101.7.1.12
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY
                             entRTSThreshold 1.3.6.1.4.1.14125.101.7.1.13
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.
                             entPreambleType 1.3.6.1.4.1.14125.101.7.1.15
This attribute specifies the preamble type: 1(Short), 2(Long)
                             entCTSProtection 1.3.6.1.4.1.14125.101.7.1.16
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None)
                             entDistance 1.3.6.1.4.1.14125.101.7.1.17
ACK timeout
                         entAthWlanESSIDInfoTable 1.3.6.1.4.1.14125.101.7.2
This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information.
                             entAthWlanESSIDInfoEntry 1.3.6.1.4.1.14125.101.7.2.1
An entry in the entWlanESSIDInfoTable.
                                 entWlanESSIDInfoIndex 1.3.6.1.4.1.14125.101.7.2.1.1
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The auxiliary variable used to identify instances of columnar objects in the ESSID information Table
                                 entESSID 1.3.6.1.4.1.14125.101.7.2.1.2
Only when op mode for Atheros is 0(AP), This attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.request
                                 entBroadcastESSID 1.3.6.1.4.1.14125.101.7.2.1.3
Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable the hidden SSID
                                 entWMM 1.3.6.1.4.1.14125.101.7.2.1.4
Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable WMM
                                 entEncryption 1.3.6.1.4.1.14125.101.7.2.1.5
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES)
                                 entWlanAuthenticationType 1.3.6.1.4.1.14125.101.7.2.1.6
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK)
                         entAthWlanWepInfoTable 1.3.6.1.4.1.14125.101.7.3
This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information.
                             entAthWlanWepInfoEntry 1.3.6.1.4.1.14125.101.7.3.1
An entry in the entWlanWepInfoTable.
                                 entWlanWepKeyID 1.3.6.1.4.1.14125.101.7.3.1.2
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array
                                 entWlanWepKey1Value 1.3.6.1.4.1.14125.101.7.3.1.3
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
                                 entWlanWepKey2Value 1.3.6.1.4.1.14125.101.7.3.1.4
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
                                 entWlanWepKey3Value 1.3.6.1.4.1.14125.101.7.3.1.5
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
                                 entWlanWepKey4Value 1.3.6.1.4.1.14125.101.7.3.1.6
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)
                         entAthWlanWPAInfoTable 1.3.6.1.4.1.14125.101.7.4
This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information.
                             entAthWlanWPAInfoEntry 1.3.6.1.4.1.14125.101.7.4.1
An entry in the entWlanWPAInfoTable.
                                 entPresharedKey 1.3.6.1.4.1.14125.101.7.4.1.2
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The WPA Pre-Shared key. (8~63 ASCII or 64 HEX)
                         entAth802dot1xInfoTable 1.3.6.1.4.1.14125.101.7.5
This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information.
                             entAth802dot1xInfoEntry 1.3.6.1.4.1.14125.101.7.5.1
An entry in the ent802dot1xInfoTable.
                                 entWlanESSIDIndex 1.3.6.1.4.1.14125.101.7.5.1.1
Only when op mode for Atheros is 0(AP), The auxiliary variable used to identify instances of columnar objects in the 802.1x information Table
                                 entRADIUSServerIPAddress 1.3.6.1.4.1.14125.101.7.5.1.2
Only when op mode for Atheros is 0(AP), The address of RADIUS Server
                                 entRADIUSServerPort 1.3.6.1.4.1.14125.101.7.5.1.3
Only when op mode for Atheros is 0(AP), The port of RADIUS Server
                                 entRADIUSServerPassword 1.3.6.1.4.1.14125.101.7.5.1.4
Only when op mode for Atheros is 0(AP), The password of RADIUS Server
                                 entWlan802dot1xEnable 1.3.6.1.4.1.14125.101.7.5.1.5
Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable 802.1x
                     entTraps 1.3.6.1.4.1.14125.101.20
                           entSystemTraps 1.3.6.1.4.1.14125.101.20.1
                           entWanTraps 1.3.6.1.4.1.14125.101.20.2
                               entWanTrapsLinkDisconnect 1.3.6.1.4.1.14125.101.20.2.1
The trap is generated when the PHY of WAN is disconnected and it was connected.
                               entWanTrapsLinkRecover 1.3.6.1.4.1.14125.101.20.2.2
The trap is generated when the PHY of WAN is connected and it was disconnected