RC-OSPF-MIB: View SNMP OID List / Download MIB
VENDOR: RAPID CITY COMMUNICATION
| Home | MIB: RC-OSPF-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| rcIpConfOspfTable | 1.3.6.1.4.1.2272.1.8.1.2 |
A table used to maintain OSPF information for a particular interface. |
||
| 1.3.6.1.4.1.2272.1.8.1.2.1 |
Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface. |
|||
| rcIpConfOspfIfIndex | 1.3.6.1.4.1.2272.1.8.1.2.1.1 |
An unique value to identify a physical interface or a logical interface (VLAN). |
||
| rcIpConfOspfRtrPriority | 1.3.6.1.4.1.2272.1.8.1.2.1.2 |
The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. |
||
| rcIpConfOspfMetric | 1.3.6.1.4.1.2272.1.8.1.2.1.3 |
The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means no route via this TOS. A value of 0 means the interface speed (rcIpConfOspfDefaultMetric) will be used as metric value, when the state of the interface is up. |
||
| rcIpConfOspfAuthKey | 1.3.6.1.4.1.2272.1.8.1.2.1.4 |
The Authentication Key. If the Areas Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Octet String of length zero. |
||
| rcIpConfOspfRowStatus | 1.3.6.1.4.1.2272.1.8.1.2.1.5 |
Row status for this entry. |
||
| rcIpConfOspfHelloInterval | 1.3.6.1.4.1.2272.1.8.1.2.1.6 |
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. |
||
| rcIpConfOspfRtrDeadInterval | 1.3.6.1.4.1.2272.1.8.1.2.1.7 |
The number of seconds that a routers Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. |
||
| rcIpConfOspfIfAreaId | 1.3.6.1.4.1.2272.1.8.1.2.1.8 |
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
||
| rcIpConfOspfAuthType | 1.3.6.1.4.1.2272.1.8.1.2.1.9 |
The authentication type specified for an interface. Additional authentication types may be assigned locally. |
||
| rcIpConfOspfPollInterval | 1.3.6.1.4.1.2272.1.8.1.2.1.10 |
OSPF NBMA Interface Poll Interval. |
||
| rcIpConfOspfIfMtuIgnore | 1.3.6.1.4.1.2272.1.8.1.2.1.11 |
Mtu-ignore flag is for ignoring the mtu checking in ospf bdb |
||
| rcIpConfOspfBfdEnable | 1.3.6.1.4.1.2272.1.8.1.2.1.12 |
Used to enable/disable BFD for OSPF. |
||
| rcIpConfOspfDefaultMetric | 1.3.6.1.4.1.2272.1.8.1.3 | |||
| rcIpConfOspfDefaultMetric10MegPort | 1.3.6.1.4.1.2272.1.8.1.3.1 |
Used to indicate the cost associated with 10Meg Interface(Port). |
||
| rcIpConfOspfDefaultMetric100MegPort | 1.3.6.1.4.1.2272.1.8.1.3.2 |
Used to indicate the cost associated with 100Meg Interface(Port). |
||
| rcIpConfOspfDefaultMetric1000MegPort | 1.3.6.1.4.1.2272.1.8.1.3.3 |
Used to indicate the cost associated with 1000Meg Interface(Port). |
||
| rcIpConfOspfDefaultMetric10000MegPort | 1.3.6.1.4.1.2272.1.8.1.3.4 |
Used to indicate the cost associated with 10000Meg Interface(Port). |
||
| rcIpConfOspfDefaultMetric40000MegPort | 1.3.6.1.4.1.2272.1.8.1.3.5 |
Used to indicate the cost associated with 40000Meg Interface(Port). |
||
| rcIpConfOspf | 1.3.6.1.4.1.2272.1.8.1.4 | |||
| rcIpConfOspfTrapEnable | 1.3.6.1.4.1.2272.1.8.1.4.1 |
Used to indicate whether Ospf Traps should be sent. |
||
| rcIpConfOspfAutoVirtLinkEnable | 1.3.6.1.4.1.2272.1.8.1.4.2 |
Used to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, but adjacency will established only when one of the ABR losses connection to backbone area. If set to false then it is user resposibity to create virtual link whenever needed. |
||
| rcIpConfOspfSpfHoldDownTime | 1.3.6.1.4.1.2272.1.8.1.4.3 |
The SPF Hold Down Timer value. The SPF will run at most once per hold down timer value. |
||
| rcIpConfOspfAction | 1.3.6.1.4.1.2272.1.8.1.4.4 | |||
| rcIpConfOspfRfc1583Compatibility | 1.3.6.1.4.1.2272.1.8.1.4.5 |
Controls the preference rules used when choosing among multiple AS-External-LSAs advertising the same destination. When this is enabled, the preference rule will be same as specified by RFC1583. When disabled, the new preference rule as described in RFC2328 will be applicable, which potentially prevents the routing loops when AS-External-LSAs for the same destination have been originated from different areas. |
||
| rcIpConfOspfAreaTable | 1.3.6.1.4.1.2272.1.8.1.7 |
A table used to maintain OSPF information for a particular Area. |
||
| 1.3.6.1.4.1.2272.1.8.1.7.1 |
Entry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1253rcc.mib). |
|||
| rcIpConfOspfAreaId | 1.3.6.1.4.1.2272.1.8.1.7.1.1 |
An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
||
| rcIpConfOspfAreaImportSummary | 1.3.6.1.4.1.2272.1.8.1.7.1.2 |
The areas support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE |
||
| rcIpConfOspfAreaActiveIfCount | 1.3.6.1.4.1.2272.1.8.1.7.1.3 |
This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0. |
||
| rcIpConfOspfV2Table | 1.3.6.1.4.1.2272.1.8.1.9 |
A table used to maintain OSPF information for a particular interface. |
||
| 1.3.6.1.4.1.2272.1.8.1.9.1 |
Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface. |
|||
| rcIpConfOspfV2IfIndex | 1.3.6.1.4.1.2272.1.8.1.9.1.1 |
An unique value to identify a physical interface or a logical interface (VLAN). |
||
| rcIpConfOspfV2IpAddr | 1.3.6.1.4.1.2272.1.8.1.9.1.2 |
IpAddress of the IP interface. |
||
| rcIpConfOspfV2RtrPriority | 1.3.6.1.4.1.2272.1.8.1.9.1.3 |
The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. |
||
| rcIpConfOspfV2Metric | 1.3.6.1.4.1.2272.1.8.1.9.1.4 |
The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means no route via this TOS. A value of 0 means the interface speed (rcIpConfOspfV2DefaultMetric) will be used as metric value, when the state of the interface is up. |
||
| rcIpConfOspfV2AuthKey | 1.3.6.1.4.1.2272.1.8.1.9.1.5 |
The Authentication Key. If the Areas Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero. |
||
| rcIpConfOspfV2RowStatus | 1.3.6.1.4.1.2272.1.8.1.9.1.6 |
Row status for this entry. |
||
| rcIpConfOspfV2HelloInterval | 1.3.6.1.4.1.2272.1.8.1.9.1.7 |
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. |
||
| rcIpConfOspfV2RtrDeadInterval | 1.3.6.1.4.1.2272.1.8.1.9.1.8 |
The number of seconds that a routers Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. |
||
| rcIpConfOspfV2IfAreaId | 1.3.6.1.4.1.2272.1.8.1.9.1.9 |
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
||
| rcIpConfOspfV2AuthType | 1.3.6.1.4.1.2272.1.8.1.9.1.10 |
The authentication type specified for an interface. Additional authentication types may be assigned locally. |
||
| rcIpConfOspfAreaAggregateTable | 1.3.6.1.4.1.2272.1.8.1.10 |
A table used to maintain OSPF summary route metric parameter for a particular Area range. |
||
| 1.3.6.1.4.1.2272.1.8.1.10.1 |
Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configured through ospfAreaAggregateTable in rfc1850rcc.mib |
|||
| rcIpConfOspfAreaAggregateAreaID | 1.3.6.1.4.1.2272.1.8.1.10.1.1 |
The Area the Address Aggregate is to be found within. |
||
| rcIpConfOspfAreaAggregateLsdbType | 1.3.6.1.4.1.2272.1.8.1.10.1.2 |
The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
||
| rcIpConfOspfAreaAggregateNet | 1.3.6.1.4.1.2272.1.8.1.10.1.3 |
The IP Address of the Net or Subnet indicated by the range. |
||
| rcIpConfOspfAreaAggregateMask | 1.3.6.1.4.1.2272.1.8.1.10.1.4 |
The Subnet Mask that pertains to the Net or Subnet. |
||
| rcIpConfOspfAreaAggregateAdvertiseMetric | 1.3.6.1.4.1.2272.1.8.1.10.1.5 |
Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric. |
||
| rcIpConfOspfAreaAggregateEffect | 1.3.6.1.4.1.2272.1.8.1.10.1.6 |
Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnets not being advertised at all outside the area. |
||
| rcStatOspf | 1.3.6.1.4.1.2272.1.12.3 | |||
| rcStatOspfBuffersAllocated | 1.3.6.1.4.1.2272.1.12.3.1 |
Used to indicate the number of buffers allocated for OSPF. |
||
| rcStatOspfBuffersFreed | 1.3.6.1.4.1.2272.1.12.3.2 |
Used to indicate the number of buffers that are freed by the OSPF. |
||
| rcStatOspfBufferAllocFailures | 1.3.6.1.4.1.2272.1.12.3.3 |
Used to indicate the number of times that OSPF has failed to allocate buffers. |
||
| rcStatOspfBufferFreeFailures | 1.3.6.1.4.1.2272.1.12.3.4 |
Used to indicate the number of times that OSPF has failed to free buffers. |
||
| rcStatOspfTxPackets | 1.3.6.1.4.1.2272.1.12.3.5 |
Used to indicate the number of packets transmitted by OSPF. |
||
| rcStatOspfRxPackets | 1.3.6.1.4.1.2272.1.12.3.6 |
Used to indicate the number of packets received by OSPF. |
||
| rcStatOspfTxDropPackets | 1.3.6.1.4.1.2272.1.12.3.7 |
Used to indicate the number of packets dropped before transmitted by OSPF. |
||
| rcStatOspfRxDropPackets | 1.3.6.1.4.1.2272.1.12.3.8 |
Used to indicate the number of packets dropped before received by OSPF. |
||
| rcStatOspfRxBadPackets | 1.3.6.1.4.1.2272.1.12.3.9 |
Used to indicate the number of packets received by OSPF that are bad. |
||
| rcStatOspfSpfRuns | 1.3.6.1.4.1.2272.1.12.3.10 |
Used to indicate the total number of SPF calculatations performed by OSPF, which also includes the number of partial route table calculation for Incremental Updates. |
||
| rcStatOspfLastSpfRun | 1.3.6.1.4.1.2272.1.12.3.11 |
Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
||
| rcStatOspfLsdbTblSize | 1.3.6.1.4.1.2272.1.12.3.12 |
Used to indicate the number of entries in the linkstate database table. |
||
| rcStatOspfRoutes | 1.3.6.1.4.1.2272.1.12.3.13 |
Used to indicate the number of OSPF routes added to RTM. |
||
| rcStatOspfAdjacencies | 1.3.6.1.4.1.2272.1.12.3.14 |
Used to indicate the number of adjacencies existing. |
||
| rcStatOspfAreas | 1.3.6.1.4.1.2272.1.12.3.15 |
Used to indicate the number of areas configured |
||
| rcStatOspfIfTable | 1.3.6.1.4.1.2272.1.12.5 |
A table used to store OSPF interface statistics. |
||
| 1.3.6.1.4.1.2272.1.12.5.1 |
Ospf interface statistics |
|||
| rcStatOspfIfIndex | 1.3.6.1.4.1.2272.1.12.5.1.1 |
An unique value that is used to identify a physical interface. |
||
| rcStatOspfIfRxHellos | 1.3.6.1.4.1.2272.1.12.5.1.2 |
Used to indicate the number hello packets received by this interface. |
||
| rcStatOspfIfRxDBDescrs | 1.3.6.1.4.1.2272.1.12.5.1.3 |
Used to indicate the number database descriptor packets received by this interface. |
||
| rcStatOspfIfRxLSUpdates | 1.3.6.1.4.1.2272.1.12.5.1.4 |
Used to indicate the number Link state update packets received by this interface. |
||
| rcStatOspfIfRxLSReqs | 1.3.6.1.4.1.2272.1.12.5.1.5 |
Used to indicate the number Link state request packets received by this interface. |
||
| rcStatOspfIfRxLSAcks | 1.3.6.1.4.1.2272.1.12.5.1.6 |
Used to indicate the number Link state acknowlege packets received by this interface. |
||
| rcStatOspfIfTxHellos | 1.3.6.1.4.1.2272.1.12.5.1.7 |
Used to indicate the number hello packets transmitted by this interface. |
||
| rcStatOspfIfTxDBDescrs | 1.3.6.1.4.1.2272.1.12.5.1.8 |
Used to indicate the number database descriptor packets transmitted by this interface. |
||
| rcStatOspfIfTxLSUpdates | 1.3.6.1.4.1.2272.1.12.5.1.9 |
Used to indicate the number Link state update packets transmitted by this interface. |
||
| rcStatOspfIfTxLSReqs | 1.3.6.1.4.1.2272.1.12.5.1.10 |
Used to indicate the number Link state request packets transmitted by this interface. |
||
| rcStatOspfIfTxLSAcks | 1.3.6.1.4.1.2272.1.12.5.1.11 |
Used to indicate the number Link state acknowlege packets transmitted by this interface. |
||
| rcStatOspfIfVersionMismatches | 1.3.6.1.4.1.2272.1.12.5.1.12 |
Used to indicate the number version mismatches received by this interface. |
||
| rcStatOspfIfAreaMismatches | 1.3.6.1.4.1.2272.1.12.5.1.13 |
Used to indicate the number area mismatches received by this interface. |
||
| rcStatOspfIfAuthTypeMismatches | 1.3.6.1.4.1.2272.1.12.5.1.14 |
Used to indicate the number AuthType mismatches received by this interface. |
||
| rcStatOspfIfAuthFailures | 1.3.6.1.4.1.2272.1.12.5.1.15 |
Used to indicate the number Authentication failures. |
||
| rcStatOspfIfNetMaskMismatches | 1.3.6.1.4.1.2272.1.12.5.1.16 |
Used to indicate the number net mask mismatches received by this interface. |
||
| rcStatOspfIfHelloIntervalMismatches | 1.3.6.1.4.1.2272.1.12.5.1.17 |
Used to indicate the number hello interval mismatches received by this interface. |
||
| rcStatOspfIfDeadIntervalMismatches | 1.3.6.1.4.1.2272.1.12.5.1.18 |
Used to indicate the number dead interval mismatches received by this interface. |
||
| rcStatOspfIfOptionMismatches | 1.3.6.1.4.1.2272.1.12.5.1.19 |
Used to indicate the number options mismatches received by this interface. |
||
| rcStatOspfIfV2Table | 1.3.6.1.4.1.2272.1.12.7 |
A table used to store OSPF interface statistics. |
||
| 1.3.6.1.4.1.2272.1.12.7.1 |
Ospf interface statistics |
|||
| rcStatOspfIfV2Index | 1.3.6.1.4.1.2272.1.12.7.1.1 |
An unique value that is used to identify a physical interface. |
||
| rcStatOspfIfV2Addr | 1.3.6.1.4.1.2272.1.12.7.1.2 |
Ip Address |
||
| rcStatOspfIfV2RxHellos | 1.3.6.1.4.1.2272.1.12.7.1.3 |
Used to indicate the number hello packets received by this interface. |
||
| rcStatOspfIfV2RxDBDescrs | 1.3.6.1.4.1.2272.1.12.7.1.4 |
Used to indicate the number database descriptor packets received by this interface. |
||
| rcStatOspfIfV2RxLSUpdates | 1.3.6.1.4.1.2272.1.12.7.1.5 |
Used to indicate the number Link state update packets received by this interface. |
||
| rcStatOspfIfV2RxLSReqs | 1.3.6.1.4.1.2272.1.12.7.1.6 |
Used to indicate the number Link state request packets received by this interface. |
||
| rcStatOspfIfV2RxLSAcks | 1.3.6.1.4.1.2272.1.12.7.1.7 |
Used to indicate the number Link state acknowlege packets received by this interface. |
||
| rcStatOspfIfV2TxHellos | 1.3.6.1.4.1.2272.1.12.7.1.8 |
Used to indicate the number hello packets transmitted by this interface. |
||
| rcStatOspfIfV2TxDBDescrs | 1.3.6.1.4.1.2272.1.12.7.1.9 |
Used to indicate the number database descriptor packets transmitted by this interface. |
||
| rcStatOspfIfV2TxLSUpdates | 1.3.6.1.4.1.2272.1.12.7.1.10 |
Used to indicate the number Link state update packets transmitted by this interface. |
||
| rcStatOspfIfV2TxLSReqs | 1.3.6.1.4.1.2272.1.12.7.1.11 |
Used to indicate the number Link state request packets transmitted by this interface. |
||
| rcStatOspfIfV2TxLSAcks | 1.3.6.1.4.1.2272.1.12.7.1.12 |
Used to indicate the number Link state acknowlege packets transmitted by this interface. |
||
| rcStatOspfIfV2VersionMismatches | 1.3.6.1.4.1.2272.1.12.7.1.13 |
Used to indicate the number version mismatches received by this interface. |
||
| rcStatOspfIfV2AreaMismatches | 1.3.6.1.4.1.2272.1.12.7.1.14 |
Used to indicate the number area mismatches received by this interface. |
||
| rcStatOspfIfV2AuthTypeMismatches | 1.3.6.1.4.1.2272.1.12.7.1.15 |
Used to indicate the number AuthType mismatches received by this interface. |
||
| rcStatOspfIfV2AuthFailures | 1.3.6.1.4.1.2272.1.12.7.1.16 |
Used to indicate the number Authentication failures. |
||
| rcStatOspfIfV2NetMaskMismatches | 1.3.6.1.4.1.2272.1.12.7.1.17 |
Used to indicate the number net mask mismatches received by this interface. |
||
| rcStatOspfIfV2HelloIntervalMismatches | 1.3.6.1.4.1.2272.1.12.7.1.18 |
Used to indicate the number hello interval mismatches received by this interface. |
||
| rcStatOspfIfV2DeadIntervalMismatches | 1.3.6.1.4.1.2272.1.12.7.1.19 |
Used to indicate the number dead interval mismatches received by this interface. |
||
| rcStatOspfIfV2OptionMismatches | 1.3.6.1.4.1.2272.1.12.7.1.20 |
Used to indicate the number options mismatches received by this interface. |
||
| rcOspfMib | 1.3.6.1.4.1.2272.1.59.1 | |||