RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
Download as:   
RAISECOM-BASE-MIB, SNMPv2-SMI, RMON-MIB, SNMPv2-TC, SWITCH-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 raisecomRemoteManagementRemote 1.3.6.1.4.1.8886.1.13
       raisecomRemoteManagementRemoteHideMibObjects 1.3.6.1.4.1.8886.1.13.1
           raisecomRemoteTemperature 1.3.6.1.4.1.8886.1.13.1.1
The current environment temperature of remote device.
           raisecomRemoteVolt3300 1.3.6.1.4.1.8886.1.13.1.2
Current voltage value of 3.3v of remote device.
           raisecomRemoteVolt2500 1.3.6.1.4.1.8886.1.13.1.3
Current voltage value of 2.5v of remote device.
           raisecomRemoteVolt1800 1.3.6.1.4.1.8886.1.13.1.4
Current voltage value of 1.8v of remote device.
           raisecomRemoteVolt1200 1.3.6.1.4.1.8886.1.13.1.5
Current voltage value of 1.2v of remote device.
           raisecomRemoteSysOperation 1.3.6.1.4.1.8886.1.13.1.6
Specifies system command in remote device.Currently,support three types command:reboot,write and erase.Reboot command is used to reset remote device,write is used to save startup-config file in remote device, and erase is used to erase startup-config file of remote device.
           raisecomRemoteSysOperationState 1.3.6.1.4.1.8886.1.13.1.7
Specifies the state of this system operation to remote device.
           raisecomRemoteHostName 1.3.6.1.4.1.8886.1.13.1.8
Host name of Remote device.
           raisecomRemoteOamNotificationEnable 1.3.6.1.4.1.8886.1.13.1.9
Specifies whether or not remote device send OAM notificaton frames.
           raisecomRemoteCommunityName 1.3.6.1.4.1.8886.1.13.1.10
The SNMPv1/v2c community name string in remote device. In remote devices community table,the index of this community is 3,and the view for this community is internet.
           raisecomRemoteCommunityPermission 1.3.6.1.4.1.8886.1.13.1.11
This object specifies the type of access allowed. readOnly(1) allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and readWrite(2) allows both GET and SET operations.
           raisecomRemoteL3IpAddr 1.3.6.1.4.1.8886.1.13.1.12
The IP Address of remote device. This IP address logically ANDed with raisecomRemoteL3Mask yields the actual subnet value for this subnet.Set the object as 0.0.0.0 means delete IP address of remote devices
           raisecomRemoteL3Mask 1.3.6.1.4.1.8886.1.13.1.13
The subnet mask for this remote subnet. It contains 1s in the bit positions for the net and subnet IDs and 0s in the bit positions for host ID. The 1s must be contiguous, starting with the left most bit.
           raisecomRemoteL3VidIface 1.3.6.1.4.1.8886.1.13.1.14
This object contains the actual VLAN ID (VID) from 1 to 4094. It is actually the management vlan of remote device.
           raisecomRemoteL3VidMemberPorts 1.3.6.1.4.1.8886.1.13.1.15
The set of ports which are permanently assigned to the egress list for this VLAN by management.Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
           raisecomRemoteL3VidUntaggedPorts 1.3.6.1.4.1.8886.1.13.1.16
The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
           raisecomRemoteL3DefaultGateway 1.3.6.1.4.1.8886.1.13.1.17
With this object to Set or get default gateway of remote devices.
           raisecomRemotePortTable 1.3.6.1.4.1.8886.1.13.1.18
A table of remote devices port properties.
                 raisecomRemotePortEntry 1.3.6.1.4.1.8886.1.13.1.18.1
Table entry for port control and status information in remote devices.
                     raisecomRemotePortIfindex 1.3.6.1.4.1.8886.1.13.1.18.1.2
The ifIndex value based 1 which identifies the unique interface of remote device.
                     raisecomRemotePortType 1.3.6.1.4.1.8886.1.13.1.18.1.3
Port type in remote devices,same as slot type.
                     raisecomRemotePortName 1.3.6.1.4.1.8886.1.13.1.18.1.4
The port name of remote devices.
                     raisecomRemotePortAdminStatus 1.3.6.1.4.1.8886.1.13.1.18.1.5
The administrative state of the port on remote devices.
                     raisecomRemotePortOperStatus 1.3.6.1.4.1.8886.1.13.1.18.1.6
The current operational state of the interface in remote devices.
                     raisecomRemotePortDuplexSpeedSet 1.3.6.1.4.1.8886.1.13.1.18.1.7
The desired speed and duplex of the interface in remote devices.
                     raisecomRemotePortDuplexSpeedGet 1.3.6.1.4.1.8886.1.13.1.18.1.8
The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is returned when the interface is down.
                     raisecomRemotePortFlowControlEnable 1.3.6.1.4.1.8886.1.13.1.18.1.9
Set the flow control on the interface to enable(1) or disable(2).
                     raisecomRemotePortFlowControlStatus 1.3.6.1.4.1.8886.1.13.1.18.1.10
The actual port flow control status of remote device.
                     raisecomRemotePortIngressRate 1.3.6.1.4.1.8886.1.13.1.18.1.11
The value is the ingress rate( kbps) of the port.
                     raisecomRemotePortEgressRate 1.3.6.1.4.1.8886.1.13.1.18.1.12
The value is the egress rate( kbps) of the port.
                     raisecomRemotePortFaultPassEnable 1.3.6.1.4.1.8886.1.13.1.18.1.13
Set fault pass to enable(1) or disable(2) on the port in remote device.
                     raisecomRemotePortFaultPassPorts 1.3.6.1.4.1.8886.1.13.1.18.1.14
The ports set which should be down when fault pass occurs.If the value is 0,stands for fault pass function is disable on this port,otherwise fault pass function is enable and the ports set specifies which ports should be down when fault pass occurs.
                     raisecomRemotePortFaultPassStatus 1.3.6.1.4.1.8886.1.13.1.18.1.15
Port state changging result of fault pass. If normal(1), there is no fault pass occurring. If down(2), the port is down because of fault pass occurring.
                     raisecomRemotePortFaultReturnEnable 1.3.6.1.4.1.8886.1.13.1.18.1.16
Set fault return on the port in remote device to enable(1) or disable(2). This value of TP is unavailable.
                     raisecomRemotePortFaultReturnStatus 1.3.6.1.4.1.8886.1.13.1.18.1.17
Port state changging result of fault return.If normal(1), there is no fault return occurring.If down(2), the port is down result of fault return occurring.This value of TP is unavailable.
                     raisecomRemotePortSD 1.3.6.1.4.1.8886.1.13.1.18.1.18
SD status. This value of TP is unavailable.
                     raisecomRemoteOptModuleType 1.3.6.1.4.1.8886.1.13.1.18.1.19
Optical module type of remote device port.
                     raisecomRemotePortDescr 1.3.6.1.4.1.8886.1.13.1.18.1.20
The description of a port in remote device.
           raisecomRemotePortStatsTable 1.3.6.1.4.1.8886.1.13.1.19
A table of remote devices port statistics.
                 raisecomRemotePortStatsEntry 1.3.6.1.4.1.8886.1.13.1.19.1
Table entry of remote devices port statistics.
                     raisecomRemoteStatsPortIfindex 1.3.6.1.4.1.8886.1.13.1.19.1.1
The ifIndex value based 1 which identifies the unique interface of remote device.
                     raisecomRemotePortInOctets 1.3.6.1.4.1.8886.1.13.1.19.1.2
The total number of octets received on the port.
                     raisecomRemotePortInPkts 1.3.6.1.4.1.8886.1.13.1.19.1.3
The total number of packets received on the port..
                     raisecomRemotePortInUcastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
                     raisecomRemotePortInMulticastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses
                     raisecomRemotePortInBroadcastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.6
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
                     raisecomRemotePortOutOctets 1.3.6.1.4.1.8886.1.13.1.19.1.7
The total number of octets transmitted out of the port, including framing characters.
                     raisecomRemotePortOutPkts 1.3.6.1.4.1.8886.1.13.1.19.1.8
The total number of packets transmitted out of the port.
                     raisecomRemotePortOutUcastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
                     raisecomRemotePortOutMulticastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
                     raisecomRemotePortOutBroadcastPkts 1.3.6.1.4.1.8886.1.13.1.19.1.11
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
                     raisecomRemotePortErrorPkts 1.3.6.1.4.1.8886.1.13.1.19.1.12
The total number of bad packets received by a specific port of remote device.
                     raisecomRemotePortDropEvents 1.3.6.1.4.1.8886.1.13.1.19.1.13
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
                     raisecomRemotePortCRCAlignErrors 1.3.6.1.4.1.8886.1.13.1.19.1.14
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     raisecomRemotePortUndersizePkts 1.3.6.1.4.1.8886.1.13.1.19.1.15
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     raisecomRemotePortOversizePkts 1.3.6.1.4.1.8886.1.13.1.19.1.16
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     raisecomRemotePortFragments 1.3.6.1.4.1.8886.1.13.1.19.1.17
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     raisecomRemotePortJabbers 1.3.6.1.4.1.8886.1.13.1.19.1.18
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a on-integral number of octets (Alignment Error).
                     raisecomRemotePortCollisions 1.3.6.1.4.1.8886.1.13.1.19.1.19
The best estimate of the total number of collisions on this Ethernet segment.
           raisecomRemoteVoltNormal 1.3.6.1.4.1.8886.1.13.1.20
This object specifies whether remote votage is in normal range or not.
           raisecomRemoteMaxAllowedFrameLength 1.3.6.1.4.1.8886.1.13.1.21
This object specifies max ethernet frame length of remote device.
           raisecomRemoteL3ObPortIpAddr 1.3.6.1.4.1.8886.1.13.1.22
The out IP Address of remote device.
           raisecomRemoteL3ObPortMask 1.3.6.1.4.1.8886.1.13.1.23
The subnet mask for this remote subnet.