RAISECOM-ERPS-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: RAISECOM-ERPS-MIB
Download as:   
SNMPv2-SMI, RAISECOM-BASE-MIB, SNMPv2-TC, SWITCH-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcErps 1.3.6.1.4.1.8886.6.1.53
       rcErpsBaseGroup 1.3.6.1.4.1.8886.6.1.53.1
           rcErpsTrapEnable 1.3.6.1.4.1.8886.6.1.53.1.1
Indicates whether traps for G.8032 should be generated or not.
           rcErpsCfgTable 1.3.6.1.4.1.8886.6.1.53.1.2
A table of erps configuration and associated properties.
               rcErpsCfgEntry 1.3.6.1.4.1.8886.6.1.53.1.2.1
Table entry for erps configuration and associated properties.
                   rcErpsId 1.3.6.1.4.1.8886.6.1.53.1.2.1.1
An index uniquely identifies a Ring, which ranges from 1~255. This value cant be modified after created.
                   rcErpsName 1.3.6.1.4.1.8886.6.1.53.1.2.1.2
Name for the associtaed Ring protection.
                   rcErpsEastPort 1.3.6.1.4.1.8886.6.1.53.1.2.1.3
The east port of the ring node.
                   rcErpsWestPort 1.3.6.1.4.1.8886.6.1.53.1.2.1.4
The west port of the ring node.
                   rcErpsBlockVlanList 1.3.6.1.4.1.8886.6.1.53.1.2.1.9
Traffic Vlanlist of the specific ring.
                   rcErpsGuardTime 1.3.6.1.4.1.8886.6.1.53.1.2.1.12
The guard timer is used to prevent Ethernet ring nodes from acting upon outdated R-APS messages and prevents the possibility of forming a closed loop. The period of the guard timer may be configured by the operator in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms.
                   rcErpsWtrTime 1.3.6.1.4.1.8886.6.1.53.1.2.1.13
In revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become fault-free. After the failed working transport entity meets this criterion, a fixed period of time shall elapse before a normal traffic signal uses it again. This period, called wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps between 5 and 12 minutes; the default value is 5 minutes.
                   rcErpsWtbTime 1.3.6.1.4.1.8886.6.1.53.1.2.1.14
The Wtb timer, called wait-to-block timer, may be configured by the operator in 1 second steps between 1 and 12 seconds;
                   rcErpsHoldOffTime 1.3.6.1.4.1.8886.6.1.53.1.2.1.15
When a new defect or more severe defect occurs (new SF), this event will not be reported immediately to protection switching if the provisioned holdoff timer value is non-zero. Instead, the holdoff timer will be started. When the holdoff timer expires, whether a defect still exists on the trail that started the timer will be checked. If one does exist, that defect will be reported to protection switching. Each protection group should have a provisionable holdoff timer. The suggested range of the holdoff timer is 0 to 10 seconds in steps of 100 ms with an accuracy of 5 ms.
                   rcErpsClearAdminCmd 1.3.6.1.4.1.8886.6.1.53.1.2.1.17
Clear the FS/MS command.
                   rcErpsProtocolVlan 1.3.6.1.4.1.8886.6.1.53.1.2.1.18
The Vlan of APS packet.
                   rcErpsRowStatus 1.3.6.1.4.1.8886.6.1.53.1.2.1.21
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
           rcErpsStatusTable 1.3.6.1.4.1.8886.6.1.53.1.3
A table of erps status information.
               rcErpsStatusEntry 1.3.6.1.4.1.8886.6.1.53.1.3.1
A table of erps status information.
                   rcErpsLastStatusOccur 1.3.6.1.4.1.8886.6.1.53.1.3.1.2
Time when last switch happens.
                   rcErpsSwitchCounts 1.3.6.1.4.1.8886.6.1.53.1.3.1.3
The times of bridge state switching.
                   rcErpsClearStatistics 1.3.6.1.4.1.8886.6.1.53.1.3.1.4
Clear the statistics or not.
           rcErpsLinkStatusTable 1.3.6.1.4.1.8886.6.1.53.1.4
A table of erps link status information.
               rcErpsLinkStatusEntry 1.3.6.1.4.1.8886.6.1.53.1.4.1
A table of erps link status information.
                   rcErpsLinkLastStatusOccur 1.3.6.1.4.1.8886.6.1.53.1.4.1.3
The time of last traffic status changed.
                   rcErpsLinkSwitchCounts 1.3.6.1.4.1.8886.6.1.53.1.4.1.4
Switch count of link state between block and forward state.
                   rcErpsLinkRapsTx 1.3.6.1.4.1.8886.6.1.53.1.4.1.5
Packet number which sent to the ring link.
                   rcErpsLinkRapsRx 1.3.6.1.4.1.8886.6.1.53.1.4.1.6
Packet number which received from the ring link.
                   rcErpsLinkFlushCounts 1.3.6.1.4.1.8886.6.1.53.1.4.1.7
The times of mac flushing
       rcErpsFailureDetGroup 1.3.6.1.4.1.8886.6.1.53.2
           rcErpsFailureDetTable 1.3.6.1.4.1.8886.6.1.53.2.1
A table of erps failure information.
               rcErpsFailureDetEntry 1.3.6.1.4.1.8886.6.1.53.2.1.1
A table of erps failure detecting.
                   rcErpsFdLink 1.3.6.1.4.1.8886.6.1.53.2.1.1.1
The link of failure detecting.
                   rcErpsFdType 1.3.6.1.4.1.8886.6.1.53.2.1.1.2
The failure detection type for the link.
                   rcErpsFdLinkStatus 1.3.6.1.4.1.8886.6.1.53.2.1.1.3
The link status.
                   rcErpsFdSfType 1.3.6.1.4.1.8886.6.1.53.2.1.1.4
The failure detect types which have triggered SF.
                   rcErpsFdMdName 1.3.6.1.4.1.8886.6.1.53.2.1.1.5
The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain.
                   rcErpsFdMaName 1.3.6.1.4.1.8886.6.1.53.2.1.1.6
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name must be unique within a maintenance domain.
                   rcErpsFdLocalMep 1.3.6.1.4.1.8886.6.1.53.2.1.1.7
Local MEPId of working or protection entity, identifying a specific MEP.
                   rcErpsFdRemoteMep 1.3.6.1.4.1.8886.6.1.53.2.1.1.8
Remote MEPId of working or protection entity, identifying a specific MEP.
                   rcErpsFdMdLevel 1.3.6.1.4.1.8886.6.1.53.2.1.1.9
The level of traffic.
       rcErpsTrapGroup 1.3.6.1.4.1.8886.6.1.53.3
           rcErpsLinkTrafficChangeTrap 1.3.6.1.4.1.8886.6.1.53.3.1
Generated when port state changes between block and forward status.
           rcErpsStatusChangeTrap 1.3.6.1.4.1.8886.6.1.53.3.2
Generated when bridge state changes between idle and protection state.
           rcErpsFopMismatch 1.3.6.1.4.1.8886.6.1.53.3.3
Generated when the configuration is wrong on the ring.