LBHUB-RBLC-MIB: View SNMP OID List / Download MIB

VENDOR: BICC


 Home MIB: LBHUB-RBLC-MIB
Download as:   
SNMPv2-TC, RFC1155-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mib-2 1.3.6.1.2.1
     system 1.3.6.1.2.1.1
     interfaces 1.3.6.1.2.1.2
     at 1.3.6.1.2.1.3
     ip 1.3.6.1.2.1.4
     icmp 1.3.6.1.2.1.5
     tcp 1.3.6.1.2.1.6
     udp 1.3.6.1.2.1.7
     bicctech 1.3.6.1.4.1.170
             bdn 1.3.6.1.4.1.170.1
                 bdnII 1.3.6.1.4.1.170.1.1
                     spiderII 1.3.6.1.4.1.170.1.1.3
                         spProduct 1.3.6.1.4.1.170.1.1.3.1
                             bridge 1.3.6.1.4.1.170.1.1.3.1.1
                                 bridgeID 1.3.6.1.4.1.170.1.1.3.1.1.1
                                     r285 1.3.6.1.4.1.170.1.1.3.1.1.1.3
                                         r285FilterDbase 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1
                                             broadcastFltr 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.1
The state of broadcast filtering. If this object is set to ON then the bridge will not forward frames with the ethernet broadcast address. The bridge itself will still be able to receive frames with the ethernet broadcast address, e.g. ARP requests.
                                             accessGroupChecking 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.2
The state of Access Group Checking. If this object is ON, then each frame is subject to Access Group Checking.
                                             accessGroupLearning 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.3
This object determines whether learned addresses belong to the Non Access Group or the Free Access Group. It is only valid when accessGroupChecking is set to ON.
                                             accessGroupDbase 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4
                                                 accessGroupTableMaxEntries 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.1
The maximum number of entries in the table accessGroupTable. In the RBLC this value is 2500.
                                                 accessGroupTableCurEntries 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.2
The current number of entries in the table accessGroupTable.
                                                 accessGroupTable 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3
A list of Access Group Entries. The number is given by accessGroupTableCurEntries.
                                                     accessGroupEntry 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1
An Access Group Entry.
                                                         accessGroupAddr 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.1
The MAC address of this entry.
                                                         accessGroupInUse 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.2
This object is ON for valid entries. The entry may be removed by setting this object to OFF.
                                                         accessGroupNon 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.3
Dictates if this MAC address shall belong to the Non-Access group.Membership of this group is mutually exclusive from all other groups.
                                                         accessGroupFree 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.4
Dictates if this MAC address shall belong to the Free Access Group.
                                                         accessGroupMgmt 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.5
Dictates if this MAC address shall belong to the Management group.Membership of this group is mutually exclusive from all other groups.
                                                         accessGroupN1 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.6
Dictates if this MAC address shall belong to Named Access Group 1.
                                                         accessGroupN2 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.7
Dictates if this MAC address shall belong to Named Access Group 2.
                                                         accessGroupN3 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.8
Dictates if this MAC address shall belong to Named Access Group 3.
                                                         accessGroupN4 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.9
Dictates if this MAC address shall belong to Named Access Group 4.
                                                         accessGroupN5 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.10
Dictates if this MAC address shall belong to Named Access Group 5.
                                                         accessGroupN6 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.11
Dictates if this MAC address shall belong to Named Access Group 6.
                                                         accessGroupN7 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.12
Dictates if this MAC address shall belong to Named Access Group 7.
                                                         accessGroupN8 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.13
Dictates if this MAC address shall belong to Named Access Group 8.
                                                         accessGroupN9 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.14
Dictates if this MAC address shall belong to Named Access Group 9.
                                                         accessGroupN10 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.15
Dictates if this MAC address shall belong to Named Access Group 10.
                                                         accessGroupN11 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.16
Dictates if this MAC address shall belong to Named Access Group 11.
                                                         accessGroupN12 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.17
Dictates if this MAC address shall belong to Named Access Group 12.
                                                         accessGroupN13 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.18
Dictates if this MAC address shall belong to Named Access Group 13.
                                                         accessGroupN14 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.19
Dictates if this MAC address shall belong to Named Access Group 14.
                                                         accessGroupN15 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.20
Dictates if this MAC address shall belong to Named Access Group 15.
                                                         accessGroupN16 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.21
Dictates if this MAC address shall belong to Named Access Group 16.
                                                         accessGroupMembers 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.22
This is a bitmap, giving membership of the sixteen named access groups in a single integer. Bit 0 corresponds to group N1, and bit 15 to group N16. Management stations which can make use of integer bitmaps should obviously use this variable, as it is more compact in PDU bandwidth, and is considerably faster for the agent to generate.
                                                 accessGroupNamedIdMaxEntries 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.4
The number Named Access Groups. In the RBLC this object has the value 16.
                                                 accessGroupNamedIdTable 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5
A list of Named Access Group identifiers. The number is given by accessGroupNamedIdMaxEntries.
                                                     accessGroupNamedIdEntry 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1
Tok_String
                                                         accessGroupNamedIdIndex 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.1
A unique value for each Named Access Group. Its value ranges between 1 and the value of accessGroupNamedNumber.
                                                         accessGroupNamedIdIdentifier 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.2
A textual identifier for this Named Access Group.
                                             pcolFltr 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6
                                                 pcolOperation 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.1
The logical operation of the individual protocol filters.
                                                 pcolNumber 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.2
The number of individual protocol filters. For the RBLC this value will be 8.
                                                 pcolTable 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3
A list of protocol filter entries. The number is given by pcolNumber. This size is fixed. No gaps are allowed in the table.
                                                     pcolEntry 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1
A protocol filter entry.
                                                         pcolIndex 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.1
A unique value for each protocol filter. Its value ranges between 1 and the value of pcolNumber.
                                                         pcolInUse 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.2
This object controls the appearance of valid protocol filter table entries, i.e. entries which contain a meaningful filter. Setting this field to notinuse causes the row to be deleted
                                                         pcolState 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.3
This object is ON if the protocol filter in this entry is being used to filter frames. This object is only meaningful if pcolInUse is set to inuse. This protocol filter is turned off by setting this object to OFF.
                                                         pcolIdentifier 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.4
A string used to identify this protocol filter.
                                                         pcolOffset 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.5
Offset within the frame of the 4-byte field on which filtering is to be performed.
                                                         pcolMask 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.6
This object is ANDed with the 4-byte field in the frame. The result is compared with pcolMatch.
                                                         pcolMatch 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.7
This object is compared with the result of ANDing pcolMask with the 4-byte field.
                                                         pcolDecision 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.8
Determines whether the comparison of pcolMatch and the masked data field will cause the action specified in pcolAction to be taken on a match, or not.
                                                         pcolAction 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.9
The action specified for this individual protocol filter.
                                 bridgeData 1.3.6.1.4.1.170.1.1.3.1.1.2
                                     bridgeMgmt 1.3.6.1.4.1.170.1.1.3.1.1.2.1
                                         brgMgmtMyName 1.3.6.1.4.1.170.1.1.3.1.1.2.1.1
The name associated with this bridge for the purpose of remote management. It is this name which shall be used within multicast name PDUs
                                         brgMgmtHelloTime 1.3.6.1.4.1.170.1.1.3.1.1.2.1.2
The time interval, in seconds, between the transmission of successive bridge management hello packets
                                         brgMgmtManagerAddr 1.3.6.1.4.1.170.1.1.3.1.1.2.1.3
The IP Address of the remote station currently managing the bridge. This remote station can be another bridge, or any device supporting Telnet. Note, that this address is not the same as that of a possible SNMP client which is managing the bridge.
                                         brgMgmtTableMaxEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.1.4
The maximum size of the Bridge Name Table.
                                         brgMgmtTableCurEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.1.5
The current number of known remote bridges in the Bridge Name Table.
                                         brgMgmtTable 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6
The table of known remote bridges which can be managed by this bridge.
                                             brgMgmtEntry 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1
An entry in the Remote Bridge Table.
                                                 brgMgmtAddr 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.1
The IP address of a remote bridge
                                                 brgMgmtName 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.2
The name of the bridge to use when trying to remotely administer it.
                                     filterDataBase 1.3.6.1.4.1.170.1.1.3.1.1.2.2
                                         dynDBase 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1
                                             dynType 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.1
This object specifies how the dynamic filtering is implemented.
                                             dynTableMaxEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.2
The maximum number of entries in the dynamic filter table.
                                             dynTableCurEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.3
The current number of entries in the dynamic filter table.
                                             dynTable 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4
The dynamic filter table
                                                 dynEntry 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1
A dynamic table entry.
                                                     dynAddr 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.1
The dynamically learned MAC source address.
                                                     dynHomePort 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.2
The port number, sptreePortIndex, on which the dynamic source address was received.
                                                     dynInUse 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.3
This object is INUSE for valid dynamic table entries. Entries may be removed by setting it to NOTINUSE.
                                         typeFltr 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5
                                             typeFltrStt 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.1
State of type filtering.
                                             typeFltrMaxEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.2
The maximum number of entries allowed in the static type filter table.
                                             typeFltrCurEntries 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.3
The current number of entries in the static type filter table.
                                             typeFltrTable 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4
Static type filter table.
                                                 typeFltrEntry 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1
An entry in the static type filter table.
                                                     typeFltrFrom 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.1
Type filter table from type (inclusive).
                                                     typeFltrTo 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.2
Type filter table to type (inclusive).
                                                     typeFltrInUse 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.3
Entries are removed by setting this object to NOTINUSE.
                                     bridgeRestart 1.3.6.1.4.1.170.1.1.3.1.1.2.3
                                         bridgeBootCount 1.3.6.1.4.1.170.1.1.3.1.1.2.3.1
The number of times this system has been auto-booted. (This refers to auto-reboots only.)
                                         bridgeRestartCause1 1.3.6.1.4.1.170.1.1.3.1.1.2.3.2
A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest, and bridgeRestartCause4 is the latest. The code is expressed as an 8 digit hex number.
                                         bridgeRestartCause2 1.3.6.1.4.1.170.1.1.3.1.1.2.3.3
A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest, and bridgeRestartCause4 is the latest. The code is expressed as an 8 digit hex number.
                                         bridgeRestartCause3 1.3.6.1.4.1.170.1.1.3.1.1.2.3.4
A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest, and bridgeRestartCause4 is the latest. The code is expressed as a 8 digit hex number.
                                         bridgeRestartCause4 1.3.6.1.4.1.170.1.1.3.1.1.2.3.5
A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest, and bridgeRestartCause4 is the latest. The code is expressed as a 8 digit hex number.
                         spIndex 1.3.6.1.4.1.170.1.1.3.2
                             supportedMaxEntries 1.3.6.1.4.1.170.1.1.3.2.1
Number of entries in the supported table.
                             supportedTable 1.3.6.1.4.1.170.1.1.3.2.2
A table of OBJECT IDENTIFIERs, pointing to MIB groups which are supported in this agent.
                                 supportedEntry 1.3.6.1.4.1.170.1.1.3.2.2.1
The OBJECT IDENTIFIER for a portion of the MIB, showing which parts of the MIB are implemented by the product.
                                     supportedIndex 1.3.6.1.4.1.170.1.1.3.2.2.1.1
A simple numeric index into the supported table, to assist with indexing.
                                     supportedID 1.3.6.1.4.1.170.1.1.3.2.2.1.2
A pointer to a supported MIB sub-tree
                             unSupportedMaxEntries 1.3.6.1.4.1.170.1.1.3.2.3
Number of entries in the unsupported table.
                             unSupportedTable 1.3.6.1.4.1.170.1.1.3.2.4
A table of OBJECT IDENTIFIERs, pointing to MIB groups, tables OR variables which are NOT supported in this agent. The unsupported OBJECT IDENTIFIERs are always subtrees of the supported table (that is, they show the management station what elements of the supported groups are not implemented).
                                 unSupportedEntry 1.3.6.1.4.1.170.1.1.3.2.4.1
The OBJECT IDENTIFIER for a portion of the MIB, showing which parts of the supported MIB are not implemented by the product.
                                     unSupportedIndex 1.3.6.1.4.1.170.1.1.3.2.4.1.1
A simple numeric index into the unsupported table, to assist with indexing.
                                     unSupportedID 1.3.6.1.4.1.170.1.1.3.2.4.1.2
A pointer to an unsupported sub-tree of a supported MIB sub-tree
                         spGeneral 1.3.6.1.4.1.170.1.1.3.3
                             mibVersion 1.3.6.1.4.1.170.1.1.3.3.1
, where product version is a string of the type 2.3.1 (product-specific), and MIB version identifies the particular flavour of SpiderMIB, such as 1:0
                             admin 1.3.6.1.4.1.170.1.1.3.3.2
                                 admSessionStt 1.3.6.1.4.1.170.1.1.3.3.2.1
The state of the management session on the product. Management sessions can only be invoked if the value of this object is noManagementSession(1). Traps may be generated when this object changes (implementation specific).
                                 admManagerAddr 1.3.6.1.4.1.170.1.1.3.3.2.2
The IP address of the product initiating an SNMP or Telnet management session. This object is 0.0.0.0 when no management session is underway, and is set to this value automatically when a session closes, or is timed out.
                                 admLockDevice 1.3.6.1.4.1.170.1.1.3.3.2.3
The host sets this variable to prevent other hosts from being able to use SNMP SET requests. This is intended for use when a host needs to carry out a series of SET operations as effectively one atomic access. When this variable is set, the IP address of the host is copied into admManagerAddr, and the management session timer is started. If the session timer expires without any contact by the locking host, the session lock is cleared, and the IP address zeroed. The standard Spider session time limit is two minutes.
                                 admOverrideDevice 1.3.6.1.4.1.170.1.1.3.3.2.4
The host sets this variable to override the current lock owner. This has the effect of zeroing the admLockDevice and admManagerAddr variables, and cancelling the management session. A sessionAborted trap is sent to the host which locked the previous management session.
                                 admPrompt 1.3.6.1.4.1.170.1.1.3.3.2.5
The string used for the command line prompt in a local or remote administration session.
                                 admPassword 1.3.6.1.4.1.170.1.1.3.3.2.6
The password required to start a management session to the administration mode of the product. It is intended that this be encrypted by a simple algorithm before it is sent onto the network.
                                 admSignOnMsg 1.3.6.1.4.1.170.1.1.3.3.2.7
The sign on message presented at the start of a local or remote administration session. This is typically the product type, name and version.
                                 admMgmtSessionTime 1.3.6.1.4.1.170.1.1.3.3.2.8
The timeout used for management session closure. If a management session is idle for this time it will close automatically and no configuration change will be made. The unit is seconds.
                                 admLastWriteAddr 1.3.6.1.4.1.170.1.1.3.3.2.9
The IP address of the source of the last received SNMP SET request.
                                 admRemManagerAddr 1.3.6.1.4.1.170.1.1.3.3.2.10
The address of the product initiating a management session corresponding to admSessionStt. This object is of zero length when no management session is underway, and is set to this value automatically when a session closes, or is timed out.
                             resources 1.3.6.1.4.1.170.1.1.3.3.4
                                 resSmartGatewayAddr 1.3.6.1.4.1.170.1.1.3.3.4.3
The IP address of the default gateway for the product. A value of 0.0.0.0 is used if there is no default gateway.
                             restart 1.3.6.1.4.1.170.1.1.3.3.5
                                 rstDoBoot 1.3.6.1.4.1.170.1.1.3.3.5.1
When set to doBoot(1) the product should send the getResponse message using the parameters rstBootFrom and rstBootfilename(if applicable), and then reboot. Reading this object always returns a value of noMeaning(2).
                                 rstDoRestart 1.3.6.1.4.1.170.1.1.3.3.5.4
When set to doRestart(1) the product should restart after sending the getResponse message. Reading this object always returns a value of noMeaning(2).
                                 rstNeedRestart 1.3.6.1.4.1.170.1.1.3.3.5.5
If the value of this object is needRestart(2) some configuration parameters have been changed which will not take effect until the product is restarted using rstDoRestart.
                                 rstDownLoadStt 1.3.6.1.4.1.170.1.1.3.3.5.6
If the value of this object is downLoading(2) a configuration download is in progress. The following rules apply: If a management session closes normally and rstDownLoadStt has the value downLoading(2) non-volatile storage is updated and the product restarts. If a management session closes for any other reason and rstDownLoadStt has the value downLoading(2) non-volatile storage is NOT updated and the product restarts. This ensures the original configuration is restored leaving the product in a consistent state.
                                 rstNumberRestarts 1.3.6.1.4.1.170.1.1.3.3.5.7
A count of the number of restarts (this includes reboots) the product has undergone.
                                 rstLastConfigChngTime 1.3.6.1.4.1.170.1.1.3.3.5.8
The time at which the configuration of the agent was last changed. A configuration change is considered to have been made when non-volatile memory is updated and the value of this object is the value of sysUpTime when this occurs. Note that a configuration change can be made using any access method such as SNMP, a local terminal or a TELNET connection.
                         spSnmp 1.3.6.1.4.1.170.1.1.3.4
                             trapCount 1.3.6.1.4.1.170.1.1.3.4.1
                                 trapCountClear 1.3.6.1.4.1.170.1.1.3.4.1.1
When set to clearCounts(1) the count of all traps in the trapCountTable is reset to zero. Reading this object always returns a value of noMeaning(2).
                                 trapCountMaxEntries 1.3.6.1.4.1.170.1.1.3.4.1.2
The maximum number of entries allowed in the trapCountTable. The actual number is the total of all of the types of generic and enterprise traps that the device can send.
                                 trapCountTable 1.3.6.1.4.1.170.1.1.3.4.1.3
A list of the numbers of traps of each type sent.
                                     trapCountEntry 1.3.6.1.4.1.170.1.1.3.4.1.3.1
An entry of trap counts for a particular trap type.
                                         trapCountIndex 1.3.6.1.4.1.170.1.1.3.4.1.3.1.1
A numeric index used to index the trapCountTable. Its value ranges between 1 and the value of trapCountMaxEntries.
                                         trapCountType 1.3.6.1.4.1.170.1.1.3.4.1.3.1.2
The type of trap, generic or enterprise.
                                         trapCountCode 1.3.6.1.4.1.170.1.1.3.4.1.3.1.3
The enumerated code for the trap, generic as specified in [3] or enterprise as specified in the management information document associated with the product.
                                         trapCountEnable 1.3.6.1.4.1.170.1.1.3.4.1.3.1.4
When the value is enableTrap(1) traps of this type are forwarded to all stations in the trapDestsTable, counted in the trapCountTable and stored in the allTrapTable(if this is supported by the product). When the value is disableTrap(2) traps of this type are not forwarded to all stations in the trapDestsTable. They are however counted in the trapCountTable and entered in the allTrapTable (if this is supported by the product).
                                         trapCountCount 1.3.6.1.4.1.170.1.1.3.4.1.3.1.5
A count of the number of traps sent of each type since the last reset of the product.
                                         trapCountTime 1.3.6.1.4.1.170.1.1.3.4.1.3.1.6
The time of the last occurrence of a particular trap type since the last reset of the product in one hundredths of a second.
                                         trapCountDescr 1.3.6.1.4.1.170.1.1.3.4.1.3.1.7
A description of the type of enterprise trap being transmitted.
                             trapDests 1.3.6.1.4.1.170.1.1.3.4.3
                                 trapDestsCheckAddr 1.3.6.1.4.1.170.1.1.3.4.3.1
The trapDestsCheckAddr object selects whether the IP address of a station requesting a management session is validated for presence in the trapDests table. If validation is enabled and the address in the SNMP request is not present in the trapDests table the request is rejected. A trap may be sent if this occurs, the choice is product specific.
                                 trapDestsMaxEntries 1.3.6.1.4.1.170.1.1.3.4.3.2
The maximum number of entries in the trapDestsTable.
                                 trapDestsCurEntries 1.3.6.1.4.1.170.1.1.3.4.3.3
The number of traps in the trapDestsTable at any instant.
                                 trapDestsTable 1.3.6.1.4.1.170.1.1.3.4.3.4
A list of the destinations to which traps are sent.
                                     trapDestsEntry 1.3.6.1.4.1.170.1.1.3.4.3.4.1
An entry for a station address to which traps are sent
                                         trapDestsIpAddr 1.3.6.1.4.1.170.1.1.3.4.3.4.1.1
The IP address of a station to which traps are sent.
                                         trapDestsSerialAddr 1.3.6.1.4.1.170.1.1.3.4.3.4.1.2
The serial IP address of a station to which traps are sent.
                                         trapDestsPhoneNumber 1.3.6.1.4.1.170.1.1.3.4.3.4.1.3
The telephone number of a modem connected to the product which can be dialed up to send traps.
                                         trapDestsSendTo 1.3.6.1.4.1.170.1.1.3.4.3.4.1.4
The interface to send traps to. This selects whether to send traps via the primary medium or the serial line.
                                         trapDestsEnable 1.3.6.1.4.1.170.1.1.3.4.3.4.1.5
When the value is sendTraps(1) traps are sent to this address and are counted in the trapCountTable and entered in the allTrapTable. When the value is dontSendTraps(2) traps are not sent to this address. They are however counted in the trapCountTable and are entered in the allTrapTable.
                                         trapDestsCommunityName 1.3.6.1.4.1.170.1.1.3.4.3.4.1.6
The community name to use when sending traps to this address.
                                         trapDestsInUse 1.3.6.1.4.1.170.1.1.3.4.3.4.1.7
Whether this entry is in use or not. This field is used to delete entries from this table.
                         spProtocols 1.3.6.1.4.1.170.1.1.3.6
                             spantree 1.3.6.1.4.1.170.1.1.3.6.14
                                   sptreeGroupAddr 1.3.6.1.4.1.170.1.1.3.6.14.15
The multicast address used by BPDUs.
                                   sptreeStt 1.3.6.1.4.1.170.1.1.3.6.14.16
The Spanning Tree State of the bridge.
                                   sptreeInit 1.3.6.1.4.1.170.1.1.3.6.14.17
When set to INITIALISE the parameters and timers of the Spanning Tree algorithm and protocol are initialised.
                             spIp 1.3.6.1.4.1.170.1.1.3.6.16
                                   sipNxtBootTableMaxEntries 1.3.6.1.4.1.170.1.1.3.6.16.1
The maximum number of entries allowed in the NxtBootTable.
                                   sipNxtBootTable 1.3.6.1.4.1.170.1.1.3.6.16.2
A table of IP interfaces, used to change the IP address, subnet mask and broadcast address, the next time the system is booted. The table indexed by the current IP address of the interface.
                                       sipNxtBootEntry 1.3.6.1.4.1.170.1.1.3.6.16.2.1
This table entry consists of the current IP address of this interface, followed by the new IP address, broadcast form and subnet masks. These will not take effect, until the system is rebooted.
                                           sipNxtBootCurIp 1.3.6.1.4.1.170.1.1.3.6.16.2.1.1
This is the current IP address of the interface.
                                           sipNxtBootNxtIp 1.3.6.1.4.1.170.1.1.3.6.16.2.1.2
The desired IP address of this interface, once the system is rebooted. The subnetmask will be changed accordingly, to cover the default mask for that IP address.
                                           sipNxtBootBbdCast 1.3.6.1.4.1.170.1.1.3.6.16.2.1.3
Sets the broadcast address to be all ones, or all zeroes.
                                           sipNxtBootSubnetMask 1.3.6.1.4.1.170.1.1.3.6.16.2.1.4
The subnet mask associated with the IP address entry. If sipNxtBootNxtIp is specified, then the subnet mask automatically changes to the default mask for the network class of the new IP entry. If sipNxtBootSubnetMask is also changed, it must at least cover the default for the new IP address (also dependent upon its network class), or the current IP address if no new one specified. Also, if the new address is on a different network, and there are gateways on the current network, a badValue error will be returned.