IES5206-TRAPS-MIB: View SNMP OID List / Download MIB
VENDOR: ZYXEL COMMUNICATIONS CORP.
Home | MIB: IES5206-TRAPS-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
trap | 1.3.6.1.4.1.890.1.5.13.13.19 | |||
object | 1.3.6.1.4.1.890.1.5.13.13.19.1 | |||
loopguardSenderIfIndex | 1.3.6.1.4.1.890.1.5.13.13.19.1.1 |
A unique value, greater than zero, for each interface. The index of sender interface which sends detected loop guard probe packet. |
||
sysProblemCause | 1.3.6.1.4.1.890.1.5.13.13.19.1.2 |
It describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc. 1: cold start by power cycle, HW_WDG, overheat, maintenance button, ... 2: operatos reboots the system |
||
sysMacAntiSpoofOrig | 1.3.6.1.4.1.890.1.5.13.13.19.1.3 |
The Original ifIndex of Mac-AntiSpoofing. |
||
sysMacAntiSpoofNew | 1.3.6.1.4.1.890.1.5.13.13.19.1.4 |
The New ifIndex of Mac-AntiSpoofing. |
||
sysMacAntiSpoofMAC | 1.3.6.1.4.1.890.1.5.13.13.19.1.5 |
The MAC of Mac-AntiSpoofing. |
||
sysCoaIssuedLoad | 1.3.6.1.4.1.890.1.5.13.13.19.1.6 |
CPU analyzed utilization when CPU overload alarm is issued. |
||
xdslDevId | 1.3.6.1.4.1.890.1.5.13.13.19.1.13 |
The device ID of DSP device on board. |
||
timerefSource | 1.3.6.1.4.1.890.1.5.13.13.19.1.18 |
The system receive timing reference signal correctly. The varable in the binding list is current reference, 0: freerun, 1: GPS module, 2: IEEE 1588, 3: SyncE |
||
dhcpServerIpv4Address | 1.3.6.1.4.1.890.1.5.13.13.19.1.19 |
IPv4 address of DHCP server address. Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d) |
||
dhcpLeasedIpv4Address | 1.3.6.1.4.1.890.1.5.13.13.19.1.20 |
The leased IPv4 address from a DHCP server Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d) |
||
dhcpIfIndex | 1.3.6.1.4.1.890.1.5.13.13.19.1.21 |
The DHCP client inteface |
||
currBondingIfIndex | 1.3.6.1.4.1.890.1.5.13.13.19.1.22 |
The current bonding ifIndex which a DSL port joined. Value starts from DSL max port plus 1 |
||
lastBondingIfIndex | 1.3.6.1.4.1.890.1.5.13.13.19.1.23 |
The last bonding ifIndex which a DSL port joined. Value starts from DSL max port plus 1 |
||
sysRestartEventType | 1.3.6.1.4.1.890.1.5.13.13.19.1.24 |
The variable describes the event that caused system restart. |
||
sysRestartProbableCause | 1.3.6.1.4.1.890.1.5.13.13.19.1.25 |
The variable describes the probable cause that caused system restart. Below probable cause shall be implemented accordingly. sysResetCause is 1 (hardware related) and if sysRestartErrorCode is 1: power input missing - powerProblem (58) 2: hardware watchdog triggered - processorProblems (535) 3: overheat triggered - highTemperature (123) 4: maintenance button pressed > 8 seconds - maunal (1025) sysResetCause is 2 (software related) and if sysRestartCode is 1: triggered by software watchdog - softwareProgramError (546) 2: restart caused by program exception (additional context stored for reference) - softwareError (163) 3: restart caused by software program intentionally - softwareError (163). sysResetCause is 3 (operation related) and if sysRestartErrorCode is 1: operator press maintenance button 7 seconds - maintenance (1026) 2: operator reset manually (either by SNMP or CLI command) - manual (1025) 3: firmware upgrade - sfwrDownloadFailure (156) |
||
slotModuleId | 1.3.6.1.4.1.890.1.5.13.13.19.1.27 |
Slot ID |
||
iesIANAEventType | 1.3.6.1.4.1.890.1.5.13.13.19.1.28 |
An object to indicate that trap belongs to which IANA event type. |
||
iesIANAProbableCause | 1.3.6.1.4.1.890.1.5.13.13.19.1.29 |
An object to indicate that trap belongs to which IANA problem cause. Below probable causes shall be supported: 1: power input missing - powerProblem (58) 2: hardware watchdog triggered - processorProblems (535) 3: overheat triggered - highTemperature (123) 4: maintenance button pressed > 8 seconds - maunal (1025) 5: triggered by software watchdog - softwareProgramError (546) 6: restart caused by program exception (additional context stored for reference) - softwareError (163) 7: restart caused by software program intentionally - softwareError (163). 8: operator press HW reset button - maintenance (1026) 9: operator reset manually (either by SNMP or CLI command) - manual (1025) 10: firmware upgrade - sfwrDownloadFailure (156) |
||
sysMoaIssuedLoad | 1.3.6.1.4.1.890.1.5.13.13.19.1.30 |
Memory analyzed utilization when memory overload alarm is issued. |
||
gponOntId | 1.3.6.1.4.1.890.1.5.13.13.19.1.31 |
gpon ont ID |
||
gponOntCardId | 1.3.6.1.4.1.890.1.5.13.13.19.1.32 |
gpon ont card ID |
||
gponOntCardPortId | 1.3.6.1.4.1.890.1.5.13.13.19.1.33 |
gpon ont card port ID |
||
gponMeClassId | 1.3.6.1.4.1.890.1.5.13.13.19.1.34 |
gpon managed entity class value |
||
gponRogueOntDetectStatus | 1.3.6.1.4.1.890.1.5.13.13.19.1.35 |
Below is the status of rouge ont detection: 1: start rogue detection 2: stop rogue detection 3: detect rogue exist 4: rogue ont does not exist 5: discover rogue ont |
||
gponOntSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.19.1.36 |
The serial number of ont |
||
gponOntPassword | 1.3.6.1.4.1.890.1.5.13.13.19.1.37 |
The password of ont |
||
gponUserName | 1.3.6.1.4.1.890.1.5.13.13.19.1.38 |
User name |
||
gponMacSubSlotId | 1.3.6.1.4.1.890.1.5.13.13.19.1.39 |
gpon MAC subslot ID |
||
mstpInstanceId | 1.3.6.1.4.1.890.1.5.13.13.19.1.40 |
mstp instance number |
||
gponOntMacAntiSpoofOrig | 1.3.6.1.4.1.890.1.5.13.13.19.1.41 |
The original gpon ont ID of Mac-AntiSpoofing. |
||
gponOntMacAntiSpoofNew | 1.3.6.1.4.1.890.1.5.13.13.19.1.42 |
The new gpon ont ID of Mac-AntiSpoofing. |
||
gponOntMacAntiSpoofMAC | 1.3.6.1.4.1.890.1.5.13.13.19.1.43 |
The gpon ont MAC of Mac-AntiSpoofing. |
||
dsltrap | 1.3.6.1.4.1.890.1.5.13.13.19.2 | |||
equipment | 1.3.6.1.4.1.890.1.5.13.13.19.3 | |||
systrap | 1.3.6.1.4.1.890.1.5.13.13.19.4 | |||
getrap | 1.3.6.1.4.1.890.1.5.13.13.19.5 | |||
gbondtrap | 1.3.6.1.4.1.890.1.5.13.13.19.7 | |||
gpontrap | 1.3.6.1.4.1.890.1.5.13.13.19.8 |