HPN-ICF-HPEOC-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-HPEOC-MIB
Download as:   
SNMPv2-SMI, HPN-ICF-OID-MIB, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfHPEOC 1.3.6.1.4.1.11.2.14.11.15.2.84
       hpnicfHPEOCSystem 1.3.6.1.4.1.11.2.14.11.15.2.84.1
           hpnicfHPEOCCltVlanType 1.3.6.1.4.1.11.2.14.11.15.2.84.1.1
Control EOC CLTs VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode.
           hpnicfHPEOCCltVlanManTable 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2
This table implements the management of CLT(Coax Line Terminal) VLAN.
               hpnicfHPEOCCltVlanManEntry 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1
The entry of the table hpnicfHPEOCCltVlanManTable.
                   hpnicfHPEOCCltEthPortType 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1
Control CLT ethernet ports type, normal : port which used for normal translation, debug : port which used for debug.
           hpnicfHPEOCCltSysManTable 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3
This table implements the management of CLT(Coax Line Terminal).
               hpnicfHPEOCCltSysManEntry 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1
The entry of the table hpnicfHPEOCCltSysManTable.
                   hpnicfHPEOCCltDescr 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1
Set the description of CLT.
                   hpnicfHPEOCCltFwVersion 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2
EOC firmware version. If the object length is zero, it means the version is unknown.
                   hpnicfHPEOCCltLinkState 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3
The cable ports link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, but registers fail. The linkup(3) state indicates that the CLT is powered on, and registers successful. The loopback(4) state indecates that the CLT is powered on and registers successful, but loopback has detected.
           hpnicfHPEOCCnuSysManTable 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4
This table implements the management of CNUs.
               hpnicfHPEOCCnuSysManEntry 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1
The entry of the table hpnicfHPEOCCnuSysManTable.
                   hpnicfHPEOCCnuBcastControl 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1
Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.
                   hpnicfHPEOCCnuAnonymStatus 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2
Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account.
                   hpnicfHPEOCCnuMacLimit 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3
Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU wont limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU.
           hpnicfHPEOCCltAutoUpgrade 1.3.6.1.4.1.11.2.14.11.15.2.84.1.5
Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed.
           hpnicfHPEOCOnLineCnuNumber 1.3.6.1.4.1.11.2.14.11.15.2.84.1.6
The total number of the online CNU(s).
           hpnicfHPEOCCpuMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.84.1.7
EOC CPUs MAC address.
           hpnicfHPEOCOffLineCnuNumber 1.3.6.1.4.1.11.2.14.11.15.2.84.1.8
The total number of the offline CNU(s).
           hpnicfHPEOCDownLoadCNUFWResult 1.3.6.1.4.1.11.2.14.11.15.2.84.1.9
Download CNU firmware result.
           hpnicfHPEOCCltAutoUpgradeType 1.3.6.1.4.1.11.2.14.11.15.2.84.1.10
Type of auto upgrade status. It depends on hpnicfHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs.
           hpnicfHPEOCAutoUpObjects 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11
                 hpnicfHPEOCServerAddress 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.1
The address of remote host acting as server for operation. The default value is 0.0.0.0
                 hpnicfHPEOCServerUser 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.2
When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters.
                 hpnicfHPEOCServerPassword 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.3
Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters.
           hpnicfHPEOCCltLoopbackDetect 1.3.6.1.4.1.11.2.14.11.15.2.84.1.12
Loopback detect Status. true(1) - The loopback detect is enabled. false(0)- The loopback detect is disabled.
           hpnicfHPEOCTemplateEnable 1.3.6.1.4.1.11.2.14.11.15.2.84.1.13
Use template for white-list cnu. true(1) - Use template is enabled. false(0)- Use template detect is disabled.
       hpnicfHPEOCCableInfo 1.3.6.1.4.1.11.2.14.11.15.2.84.2
           hpnicfHPEOCCableInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1
This table defines the primary parameters of the cable information.
               hpnicfHPEOCCableInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1
The entry of the table hpnicfHPEOCCableInfoTable.
                   hpnicfHPEOCFECErrors 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1
The cable ports FEC bits errors ratio. FEC means the payload Forward Error Correction. Its a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend.
                   hpnicfHPEOCAvgBitsPerCarrier 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2
The cable ports average bits per carrier.
                   hpnicfHPEOCAvgSNRPerCarrier 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3
The cable ports signal noise ratio(SNR) bits per carrier.
                   hpnicfHPEOCAvgInPBCRCErrors 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4
The input PB CRC errors on average.
                   hpnicfHPEOCInTotalPkts 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5
The total number of packets(including bad packets) received on this interface.
                   hpnicfHPEOCAvgOutPower 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6
The cable ports power sent on average, the unit is db.
                   hpnicfHPEOCAvgOutPBCRCErrors 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7
The cable ports physical block(PB) cyclic redundancy check(CRC) errors sent on average.
                   hpnicfHPEOCOutTotalPkts 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8
The total count of the packets(including bad packets) sent on this interface.
           hpnicfHPEOCBitPerSymbolTable 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2
This table defines the bits per symbol parameters of the cable line.
               hpnicfHPEOCBitPerSymbolEntry 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1
The entry of the table hpnicfHPEOCBitPerSymbolTable.
                   hpnicfHPEOCBitPerSymbolIndex 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1
The index of the hpnicfHPEOCBitPerSymbolTable.
                   hpnicfHPEOCBitPerSymbol 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2
hpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.
       hpnicfHPEOCTemplate 1.3.6.1.4.1.11.2.14.11.15.2.84.3
       hpnicfHPEOCCnuAccess 1.3.6.1.4.1.11.2.14.11.15.2.84.4