HP-MCSG: View SNMP OID List / Download MIB
VENDOR: HEWLETT-PACKARD
Home | MIB: HP-MCSG | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
hp | 1.3.6.1.4.1.11 | |||
nm | 1.3.6.1.4.1.11.2 | |||
system | 1.3.6.1.4.1.11.2.3 | |||
general | 1.3.6.1.4.1.11.2.3.1 | |||
hpmcCluster | 1.3.6.1.4.1.11.2.3.1.6 | |||
hpmcTypeSpecific | 1.3.6.1.4.1.11.2.3.1.6.3 | |||
hpmcSGCluster | 1.3.6.1.4.1.11.2.3.1.6.3.1 | |||
hpmcSGTraps | 1.3.6.1.4.1.11.2.3.1.6.3.1.0 | |||
hpmcSGObjects | 1.3.6.1.4.1.11.2.3.1.6.3.1.1 | |||
hpmcSGGenInfo | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1 | |||
hpmcSGClusterIndex | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.1 |
The index into the general cluster table which contains other information about the Service Guard cluster (such as membership and general state information). |
||
hpmcSGClusterID | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.2 |
The unique ID assigned to this cluster configuration by the MC/ServiceGuard configuration daemon. |
||
hpmcSGHeartbeatInterval | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.3 |
The interval between the sending of heartbeat messages. The value is expressed in microseconds. |
||
hpmcSGNodeTimeout | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.4 |
The maximum amount of time allowed between receipt of heartbeats, before marking a node as down. The value is expressed in microseconds. |
||
hpmcSGAutoStartTimeout | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.5 |
The number of microseconds to wait for all nodes to join the cluster when nodes are booting up. |
||
hpmcSGNetworkPollingInterval | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.1.6 |
The frequency at which LAN cards send a message to another LAN card in order to verify its health. The value is expressed in microseconds. |
||
hpmcSGLockInfo | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.2 | |||
hpmcSGLockTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1 |
A table describing the volume groups which are used as locks for the ServiceGuard cluster. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1 |
An entry providing information about a specific volume used for locking the ServiceGuard cluster. |
|||
hpmcSGVolumeIndex | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1.1 |
A value which uniquely identifies this volume. |
||
hpmcSGPhysicalVolume | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1.2 |
Device path used to access the disk device used for locking. |
||
hpmcSGIfInfo | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3 | |||
hpmcSGNetTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1 |
A table describing the network interfaces in which SG has an active interest. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1 |
An entry providing information about a specific network interface of interest to the ServiceGuard cluster. |
|||
hpmcSGNetIfIndex | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.1 |
The index value which uniquely identifies the network interface card to which this entry is applicable. This index matches that in the MIB-II interface table and in particular, ifIndex. |
||
hpmcSGNetIfName | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.2 |
This is the concise name of the network interface, which is used in local system management operations. It may differ from the MIB II object ifDescr, in that the latter can contain additional information. |
||
hpmcSGNetBridgedNet | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.3 |
A unique value which identifies the bridged network to which this interface card is physically attached. Interface cards sharing the same bridged network, which are not currently active can act in a backup capacity for others. |
||
hpmcSGNetIfFlags | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.4 |
An integer whose value represents a bitstring. These bit values indicate flag settings for this interface as well as status information. Note that the MIB-II interface group also contains status information, but this is relative to IP (if IP is not enabled on the card, it is marked as down). The value is determined by summing the following: 1 - Heartbeat 2 - Primary 4 - Active 8 - HW Failure Detected 16 - Connectivity Failure Detected |
||
hpmcSGNetLastEventTime | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.6 |
Indicates at what time the event described by hpmcSGNetLastEvent occured. A value of 0 indicates that the time is unknown. |
||
hpmcSGNetIfHwPath | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.7 |
Describes the HW location of the interface card. This information can be useful in locating the physical position of a faulty card. |
||
hpmcSGPkgInfo | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4 | |||
hpmcSGPkgTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1 |
A table describing the packages which are currently configured for the ServiceGuard cluster. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1 |
An entry providing information about a specific package. |
|||
hpmcSGPkgIndex | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.1 |
An index value which uniquely identifies the package. These indices should be consistent across nodes in the same SG Cluster. More specifically, these indices should match the cluster-wide pkgid assigned by SG. |
||
hpmcSGPkgName | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.2 |
The name configured for this package. |
||
hpmcSGPkgDescr | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.3 |
Explanatory text provided by the user to further clarify the function of this package. |
||
hpmcSGPkgStatus | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.4 |
This integer value is the encoding of a set of bits which include configured flags for the package in addition to dynamic status information. The value is determined by summing those flags from the list below which are applicable: 1 - Up 2 - Moving 4 - Valid package status 8 - PackageSwitchingEnabled 16 - NetSwitchingEnabled 32 - NodeFailFastEnabled 64 - SummaryLocalSwitchStatus |
||
hpmcSGPkgCurrNode | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.5 |
Name of the node where the package is executing. This string will be empty if the package is currently unowned. |
||
hpmcSGPkgLastEventTime | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.7 |
Indicates at what time the package entered the status described by hpmcSGPkgStatus. A value of 0 indicates that the time is unknown. |
||
hpmcSGPkgRunScriptPath | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.8 |
The name of the file which is invoked in order to launch the package. |
||
hpmcSGPkgHaltScriptPath | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.9 |
The name of the file which is invoked in order to shutdown the package. This is often the same as the Run Script. |
||
hpmcSGPkgRunScriptTimeout | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.10 |
The maximum amount of time allowed for the Run Script to complete. The value is expressed in seconds. |
||
hpmcSGPkgHaltScriptTimeout | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.11 |
The maximum amount of time allowed for the Run Script to complete. The value is expressed in seconds. |
||
hpmcSGPkgSubnetTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2 |
A table describing the subnets upon which this package has a dependency. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1 |
An entry describes a single subnet dependency. |
|||
hpmcSGPkgSubnet | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.1 |
The Subnetwork Id on which this package has a dependency. Service Guard will migrate the package to another host in the event this subnetwork becomes unavailable. |
||
hpmcSGPkgSubnetStatus | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.2 |
The current state of the service. |
||
hpmcSGPkgOverrideMACAddr | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.3 |
A MAC address which will be used to override the default MAC address on the interface card associated with the given Subnet. In particular this will allow DLPI applications to continue servicing clients on the same address after failover. In the event that no override MAC address is used, this object shall be assigned the value 0x000000000000. |
||
hpmcSGPkgAddrTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3 |
A table describing the movable IP addresses which are usually associated with active packages on this node. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1 |
An entry describes a single address associated with a package. |
|||
hpmcSGPkgAddr | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1.1 |
A migratable address which is currently active for this package. |
||
hpmcSGPkgID | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1.2 |
The hpmcSGPkgIndex value for the owning package. A value of 0 indicates no owning package. |
||
hpmcSGPkgSvcTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4 |
A table describing the services or applications which are associated with active packages on this node. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1 |
An entry that describes a single service associated with a package. |
|||
hpmcSGPkgSvcIndex | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.1 |
A unique value which identifies this service in the context of the package. |
||
hpmcSGPkgSvcName | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.2 |
The name of this service. |
||
hpmcSGPkgSvcStatus | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.3 |
The current state of the service. |
||
hpmcSGPkgSvcFlags | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.4 |
An integer whose value represents a bitstring. These bit values indicate flag settings for this service. Currently there is only one flag available. The value is determined by summing the following: 8 - FailFastSwitch |
||
hpmcSGPkgSvcHaltTimeout | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.5 |
The maximum amount of time ServiceGuard will wait for the service to terminate during package shutdown. The value is expressed in seconds. |
||
hpmcSGPkgSvcMaxRestarts | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.6 |
The maximum number of times this Service may be restarted. A value of 0 indicates that the service may not be restarted, a value of -1 indicates no limit. |
||
hpmcSGPkgSvcRestartCount | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.7 |
The current number of times this service has been restarted. |
||
hpmcSGPkgNodeTable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5 |
A table describing the ordered list of nodes where this package can run. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1 |
An entry describes a single candidate node. |
|||
hpmcSGPkgNodeRank | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.1 |
Order in which the node indicated by hpmcSGPkgNode will be chosen for this package. Lowest number is chosen first. |
||
hpmcSGPkgNode | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.2 |
Index of a node (within the hpmcNodeTable) that could run this package. |
||
hpmcSGPkgLocalSwitchEnable | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.3 |
A binary value that represents the status of the LOCAL switch capability for the respective package on the particular node. |
||
hpmcSGPkgSubnet6Table | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6 |
A table describing the IPv6 subnets upon which this package has a dependency. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1 |
An entry describes a single IPv6 subnet dependency. |
|||
hpmcSGPkgSubnet6 | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.1 |
The IPv6 Subnetwork Id on which this package has a dependency. Service Guard will migrate the package to another host in the event this subnetwork becomes unavailable. |
||
hpmcSGPkgSubnet6Status | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.2 |
The current state of the IPv6 subnet. |
||
hpmcSGPkgOverrideMACAddr6 | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.3 |
A MAC address which will be used to override the default MAC address on the interface card associated with the given IPv6 Subnet. In particular this will allow DLPI applications to continue servicing clients on the same address after failover. In the event that no override MAC address is used, this object shall be assigned the value 0x000000000000. |
||
hpmcSGPkgAddr6Table | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7 |
A table describing the movable IPv6 addresses which are usually associated with active packages on this node. |
||
1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1 |
An entry describes a single IPv6 address associated with a package. |
|||
hpmcSGPkgAddr6 | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1.1 |
A migratable IPv6 address which is currently active for this package. |
||
hpmcSGPkgID6 | 1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1.2 |
The hpmcSGPkgIndex value for the owning package. A value of 0 indicates no owning package. |