HH3C-ACFP-MIB: View SNMP OID List / Download MIB

When retrieved, this object returns a set of bits indicating the capabilities (or configuration) of the switch or router. The set bit is indication that a router or switch can support the action for security rule.

When retrieved, this object returns the maximum lifetime in seconds, that this router or switch allows policy rules to have.

When retrieved, this object returns true(1) if the ACFP MIB implementation can store policy rules persistently. Otherwise, it returns false(2).

In some circumstances, its necessary that packets go to ACFP client with context from ACFP server. However, the context perhaps is different. hh3cAcfpServerCurContextType is used to distinguish this difference, ACFP client may process distinctively.

This table contains the basic information about ACFP client.

This list contains the basic information about ACFP client.

The identifier of ACFP client.

Description of the application that is running on ACFP client, eg. IPS, VCX.

The hardware revision of ACFP client.

The operating system version running ACFP client.

The application version running on ACFP client

IP address of ACFP client.

ACFP client informs Router or switch which mode it is operating. Router or switch checks hh3cAcfpServerInfo to see whether it is capable of fulfilling this function. If not, router or switch generates a trap informing ACFP client such OAP mode is not supported.

RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hh3cAcfpClientMode must be bound while creating a row. It is optional for other nodes. ACFP module must be enabled for the server while creating a row. The number of rows created must not exceed upper limit. Modification Operation Restriction: Nodes that do not support modification: hh3cAcfpClientMode. Nodes that support modification: hh3cAcfpClientDescription, hh3cAcfpClientHwVersion, hh3cAcfpClientOSVersion, hh3cAcfpClientAppVersion and hh3cAcfpClientIP. If the row to be modified does not exist, error returns directly. Deletion Operation Restriction: If the row to be deleted does not exist, success returns directly.

This table lists all current policies for ACFP client(s). Entries in this table are created or removed implicitly when entries in the hh3cAcfpRuleTable are created or removed, respectively. A policy entry in this table only exists as long as there is rule of this policy in the hh3cAcfpRuleTable. The table serves for listing the existing policies and their remaining lifetimes and for changing lifetimes of policies and implicitly of all policy members and all their member policy rules can be deleted by setting hh3cAcfpPolicyLifetime to 0.

The list contains basic information of ACFP Policy.

The identifier of the Policy of ACFP client

Packet is received from this interface. The value of this object contains the same value of ifIndex of ifTable.

Packet is sent to this interface. The value of this object contains the same value of ifIndex of ifTable.

Through this interface, packet go to ACFP client from ACFP server. The value of this object contains the same value of ifIndex of ifTable.

Internal id ACFP server allocated used to map to the interface. ACFP server may send packet with this hh3cAcfpPolicyContextID to ACFP client, ACFP client can make use of this hh3cAcfpPolicyContextID and find the policy.

The value of this object indicates the desired status of the policy.

When retrieved, this object delivers the maximum lifetime (seconds) of all the rules of this, i.e., of all the rows in hh3cAcfpRuleTable that have the same values of hh3cAcfpRulePolicyIndex and hh3cAcfpClientID. Successfully writing to this object modifies the lifetime of all the rules of this. Successfully writing a value of 0 terminates all the rules and implicitly deletes this as soon as all member entries are removed from the hh3cAcfpRuleTable. Note that after a lifetime expired, all the corresponding entry in the hh3cAcfpRuleTable will be removed and this will be deleted implicitly. Writing to this object is processed by the ACFP MIB implementation by choosing a lifetime value that is greater than or equal to zero and less than or equal to the minimum of the requested value and the value specified by object hh3cAcfpServerMaxLifetime: 0 <= lt_granted <= MINIMUM(lt_requested, lt_maximum) whereas: lt_granted is the actually granted lifetime by the ACFP MIB implementation. lt_requested is the requested lifetime of the ACFP client. lt_maximum is the value of object hh3cAcfpServerMaxLifetime. SNMP set requests to this object may be rejected or the value of the object after an accepted set operation may be less than the value that was contained in the SNMP set request.

Beginning time of this policy every day. Eg. HH:MM:SS

Ending time of this policy every day. Eg. HH:MM:SS

RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: The client corresponding to the index hh3cAcfpClientID must exist while creating a row. Nodes hh3cAcfpPolicyTimeStart and hh3cAcfpPolicyTimeEnd are bound together, and hh3cAcfpPolicyTimeEnd must be greater than hh3cAcfpPolicyTimeStart. The number of rows created on an incoming/outgoing interface cannot exceed the upper limit. The number of rows created cannot exceed the upper limit for each client. A packet matches a policy in the following order: - It first matches the policy with the highest priority. - For two policies with the same priority, it matches the one with the smallest client index. - For two policies with the same client index, it matches the one with the smallest policy index. Modification Operation Restriction: Nodes that do not support modification: hh3cAcfpPolicyInIfIndex, hh3cAcfpPolicyOutIfIndex, hh3cAcfpPolicyDestIfIndex, hh3cAcfpPolicyDestIfFailAction, hh3cAcfpPolicyPriority. Nodes that support modification: hh3cAcfpPolicyAdminStatus, hh3cAcfpPolicyLifetime, hh3cAcfpPolicyTimeStart and hh3cAcfpPolicyTimeEnd. While modifying a row, if the row corresponding to the index configured does not exist, error returns directly. While modifying a node, the restriction over hh3cAcfpPolicyTimeStart and hh3cAcfpPolicyTimeEnd is the same as creating a node. Deletion Operation Restriction: If the row to be deleted does not exist, success returns directly.

The value of this object indicates the action of the policy when the destination interface failed.

The value of this object indicates the priority of the policy. Priority8 is maximal priority. Priority1 is minimal priority.

This table lists all the rules. It is indexed by hh3cAcfpClientID, hh3cAcfpRulePolicyIndex and hh3cAcfpRuleIndex. Entries can be deleted by writing hh3cAcfpPolicyLifetime to 0.

The list contains basic information of the rule.

The identifier of the rules which have the same hh3cAcfpPolicyIndex and hh3cAcfpClientID.hh3cAcfpRuleIndex indicates rule sequence in the same policy.

The value of this object indicates the status of a rule. success : Applied rule to interface successfully. fail : Failed to apply rule to interface.

The action of this rule.

The rule match all packet or does not. true : all false : not all

Source MAC of this rule.

Destination MAC of this rule.

Starting VLAN id of this rule. 0 : Invalid value

Ending VLAN id of this rule. 0 : Invalid value

The protocol-type of this rule. <0-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Management Protocol(2) ip Any IP protocol(0) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)

Source IP address of this rule.

Source IP-address wild of this rule. Eg. 0.0.0.255.

Source Port operation for this rule

Starting UDP/TCP Source Port number of this rule.

Ending UDP/TCP Source Port of this rule.

Destination IP address of this rule.

Destination IP-address wild of this rule. Eg. 0.0.0.255

Destination Port operation for this rule

Starting UDP/TCP Destination Port number of this rule.

Ending UDP/TCP Destination Port of this rule.

The value of precedence field in IP header. <255> Invalid value <0-7> value of precedence routine(0) Routine precedence priority(1) Priority precedence immediate(2) Immediate precedence flash(3) Flash precedence flash-override(4) Flash Override precedence critical(5) Critical precedence internet(6) Network Control precedence network(7) Internetwork Control precedence

The value of TOS field in IP header. <255> Invalid value <0-15> value of ToS (Type of Service) Normal(0) normal service min-monetary-cost(1) minimum monetary cost max-reliability(2) maximum reliability max-throughput(4) maximum throughput min-delay(8) minimum delay

The value of DSCP. <255> Invalid value <0-63> value of DSCP Be(0) best effort af11(10) assured forwarding 11 service af12(12) assured forwarding 12 service af13(14) assured forwarding 13 service af21(18) assured forwarding 18 service af22(20) assured forwarding 20 service af23(22) assured forwarding 22 service af31(26) assured forwarding 31 service af32(28) assured forwarding 32 service af33(30) assured forwarding 33 service af41(34) assured forwarding 41 service af42(36) assured forwarding 42 service af43(38) assured forwarding 43 service cs1(8) class selector 1 service cs2(16) class selector 2 service cs3(24) class selector 3 service cs4(32) class selector 4 service cs5(40) class selector 5 service cs6(48) class selector 6 service cs7(56) class selector 7 service ef(46) expedited forwarding service

Establish Flag. Matches the TCP packets with the ACK and/or RST flag, including the TCP packets of these types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.

The flag of matching fragmented packet.

Packet rate (Kbps) of this rule.

RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hh3cAcfpRuleAction must be bound while creating a line. Nodes hh3cAcfpRuleAll and hh3cAcfpRuleProtocol, hh3cAcfpRuleSrcIP, hh3cAcfpRuleSrcIPMask, hh3cAcfpRuleDstIP, hh3cAcfpRuleSrcOp, hh3cAcfpRuleSrcStartPort, hh3cAcfpRuleSrcEndPort, hh3cAcfpRuleDstIP, hh3cAcfpRuleDstIPMask, hh3cAcfpRuleDstOp, hh3cAcfpRuleDstStartPort, hh3cAcfpRuleDstEndPort, hh3cAcfpRulePrecedence, hh3cAcfpRuleTos, hh3cAcfpRuleDscp, hh3cAcfpRuleTCPFlag, hh3cAcfpRuleFragment are mutually exclusive. Nodes hh3cAcfpRuleSrcIP and hh3cAcfpRuleSrcIPMask are bound together, otherwise, the source IP address is neglected. The restriction over hh3cAcfpRuleDstIP and hh3cAcfpRuleDstIPMask is the same as hh3cAcfpRuleSrcIP and hh3cAcfpRuleSrcIPMask. Nodes hh3cAcfpRuleDscp and hh3cAcfpRulePrecedence, hh3cAcfpRuleTos are mutually exclusive. If the node hh3cAcfpRuleSrcOp is bound to range(5), hh3cAcfpRuleSrcStartPort and hh3cAcfpRuleSrcEndPort must be bound together, and hh3cAcfpRuleSrcEndPort must be greater than hh3cAcfpRuleSrcStartPort. If the node hh3cAcfpRuleSrcOp is bound to equal(1), notEqual(2), lessThan(3) or greaterThan(4), hh3cAcfpRuleSrcStartPort must be bound together, and hh3cAcfpRuleSrcEndPort is neglected. The restriction over hh3cAcfpRuleDstOp, hh3cAcfpRuleDstStartPort and hh3cAcfpRuleDstEndPort is the same as hh3cAcfpRuleSrcOp, hh3cAcfpRuleSrcStartPort and hh3cAcfpRuleSrcEndPort. If the node hh3cAcfpRuleAction is bound to redirect(3) or mirror(4), the destination interfaces of the policy the rule belonging to must exist; The number of rows created cannot exceed the upper limit for each policy, each inbound interface and each outbound interface. Modification Operation Restriction: The row does not support modification. Deletion Operation Restriction If the row to be deleted does not exist, success returns directly.

TCP Flag. <0> dont care for TCP flag to match packets <1-65535> care for TCP flag to match packets, the value is combination of next list. URG_VALID (1 << 13) URG_SET (1 << 5) ACK_VALID (1 << 12) ACK_SET (1 << 4) PSH_VALID (1 << 11) PSH_SET (1 << 3) RST_VALID (1 << 10) RST_SET (1 << 2) SYN_VALID (1 << 9) SYN_SET (1 << 1) FIN_VALID (1 << 8) FIN_SET 1 Matches the TCP packets with the URG and/or ACK and/or PSH and/or RST and/or SYN and/or FIN flag, including the TCP packets of these types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.

Source IPv6 address of this rule.

Source IPv6 address prefix length of this rule. Eg. 64.

Destination IPv6 address of this rule.

Destination IPv6 address prefix length of this rule. Eg. 64.

Traffic type of this rule. When retrieved, this object returns a set of bits indicating the traffic type.

The type or length of ethernet packet. For Ethernet II encapsulation, it stands for packet type. For 802.3 encapsulation, it stands for packet length.

This notification is sent when router or switch changed hh3cAcfpServerCurContextType.

This notification is sent when the ACFP client is registered.

This notification is sent when the ACFP client is unregistered.

This notification is sent when the ACFP client is not responding.

This notification is sent when router or switch cannot support OAP mode that ACFP client wants to operate on.

This notification can be generated for indicating that The lifetime of all member rules of the was changed by successfully writing to object hh3cAcfpPolicyLifetime. Note that this notification is only sent if the lifetime of a policy was changed by successfully writing to object hh3cAcfpPolicyLifetime.

This notification is sent when a new rule is created.

This notification is sent when a rule is deleted.

This notification is sent when rule cannot be applied.

This notification is sent when the time of the policy existed exceeds its lifetime.