CIENA-CES-BENCHMARK-MIB: View SNMP OID List / Download MIB

VENDOR: CIENA CORPORATION


 Home MIB: CIENA-CES-BENCHMARK-MIB
Download as:   
CIENA-SMI, SNMPv2-SMI, CIENA-GLOBAL-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cienaCesBenchmarkMIB 1.3.6.1.4.1.1271.2.1.39
       cienaCesBenchmarkMIBObjects 1.3.6.1.4.1.1271.2.1.39.1
           cienaCesBenchmarkModule 1.3.6.1.4.1.1271.2.1.39.1.1
               cienaCesBenchmarkGlobalObjects 1.3.6.1.4.1.1271.2.1.39.1.1.1
                   cienaCesBenchmarkGlobalAdminState 1.3.6.1.4.1.1271.2.1.39.1.1.1.1
Administrative state of the benchmark feature at the global level.
                   cienaCesBenchmarkGlobalGeneratorDefaultEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.1.2
Default EMIX sequence to be used on a test instance when no EMIX is specified in the test instance targeted test profile. This applies to generator test instances only.
                   cienaCesBenchmarkGlobalGeneratorDefaultKpiProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.1.3
Default KPI profile to be used to analyze the results of a test instance when no KPI profile is specifed in the targeted test profile. This applies to generator test instances only.
                   cienaCesBenchmarkGlobalGeneratorDefaultBwAllocProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.1.4
Default bandwidth allocation profile to be used with a test instance when no bandwidth allocation profile is specified in the targeted test profile. This applies to generator test instances only.
                   cienaCesBenchmarkGlobalPlatformMaxConfigEntities 1.3.6.1.4.1.1271.2.1.39.1.1.1.5
Maximum number of entities that can be created on this platform.
                   cienaCesBenchmarkGlobalPlatformMaxConfigTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.1.6
Maximum number of test instances that can be created on this platform.
                   cienaCesBenchmarkGlobalPlatformMaxConfigTestProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.7
Maximum number of test profiles that can be created on this platform.
                   cienaCesBenchmarkGlobalPlatformMaxConfigKpiProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.8
Maximum number of KPI profiles that can be created on this platform.
                   cienaCesBenchmarkGlobalPlatformMaxConfigBwAllocProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.9
Maximum number of bandwidth distribution profiles that can be created on this platform.
                   cienaCesBenchmarkGlobalPlatformMaxConfigEmixSequences 1.3.6.1.4.1.1271.2.1.39.1.1.1.10
Maximum number of EMIX sequences that can be created on this platform, including the system created ones.
                   cienaCesBenchmarkGlobalPlatformMaxSimultaneousRunningTests 1.3.6.1.4.1.1271.2.1.39.1.1.1.11
Maximum number of test instances that can be running simultaneously on this platform.
                   cienaCesBenchmarkGlobalConfiguredEntities 1.3.6.1.4.1.1271.2.1.39.1.1.1.12
Number of entities currently configured.
                   cienaCesBenchmarkGlobalConfiguredTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.1.13
Number of test instances currently configured.
                   cienaCesBenchmarkGlobalConfiguredProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.14
Number of test profiles currently configured.
                   cienaCesBenchmarkGlobalConfiguredEmixSequences 1.3.6.1.4.1.1271.2.1.39.1.1.1.15
Number of EMIX sequences currently configured, including the system created ones.
                   cienaCesBenchmarkGlobalConfiguredKpiProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.16
Number of KPI profiles currently configured.
                   cienaCesBenchmarkGlobalConfiguredBwAllocProfiles 1.3.6.1.4.1.1271.2.1.39.1.1.1.17
Number of bandwidth distribution profiles currently configured.
                   cienaCesBenchmarkGlobalEnabledTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.1.18
Number of test instances currently enabled across the platform.
                   cienaCesBenchmarkGlobalGeneratorRunningTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.1.19
Number of generator test instances currently running across the platform.
               cienaCesBenchmarkEntityTable 1.3.6.1.4.1.1271.2.1.39.1.1.2
Table of benchmark entity entries.
                   cienaCesBenchmarkEntityEntry 1.3.6.1.4.1.1271.2.1.39.1.1.2.1
BENCHMARK Entity characteristics.
                       cienaCesBenchmarkEntityEntryId 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.1
Entity unique ID
                       cienaCesBenchmarkEntityEntryName 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.2
Name of the benchmark entity as entered when created.
                       cienaCesBenchmarkEntityEntryRole 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.3
Entity role
                       cienaCesBenchmarkEntityEntryPortId 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.4
Entity port under test
                       cienaCesBenchmarkEntityEntryMode 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.5
Entity mode
                       cienaCesBenchmarkEntityEntryAdminState 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.6
Entity admin state.
                       cienaCesBenchmarkEntityEntryLocalMac 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.7
The FPGA internal test port assigned mac address.
                       cienaCesBenchmarkEntityEntrySlotId 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.8
The slot Id of the line module associated with this entity.
                       cienaCesBenchmarkEntityEntryReflectorVendorType 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.9
Indicator as to what type of equipment is generating the test traffic on the remote end.
                       cienaCesBenchmarkEntityEntryReflectionLevel 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.10
For reflector entities, this indicates the minimum reflection level required. If test traffic is going over an ethernet L2 cloud, l2-only is fine. But if the test traffic is going over an IP network, the reflector needs to be able to swap L2 and L3 fields. Depending on the type of IP network, the user needs to configured IPv4 or IPv6. L2 to L4 will swap MAC addresses, IP addresses and src and destination L4 port. Depending on the reflection level required, a different device is used to implement the reflector.
                       cienaCesBenchmarkEntityEntryGeneratorHFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.11
Maximum frame size that should be generated by the generator device. This H frame size should to leave enough room for extra encapsulation bytes that will be pushed onto the packet by the switch when pushing this test packet out the network side port. The generator device will ensure that any frame size list or EMIX used during the test is adjusted accordingly
                       cienaCesBenchmarkEntityEntryMaxConfigTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.12
Maximum number of test instances that can be configured on this entity.
                       cienaCesBenchmarkEntityEntryMaxSimultaneousTestInstances 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.13
Maximum number of test instances that can be enabled (reflector) or running (generator) on this entity, given the availability of hw sessions.
                       cienaCesBenchmarkEntityEntryOperEnabled 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.14
Entity operational enable/disable. An entity is operationally enabled when the feature is enabled, the entity is enabled and at least one test instance associated with that entity is enabled (reflector) or running (generator)
                       cienaCesBenchmarkEntityEntryNumTestInstancesConfigured 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.15
Number of test instances currently configured on this entity.
                       cienaCesBenchmarkEntityEntryNumTestInstancesEnabled 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.16
Number of test instances currently enabled.
                       cienaCesBenchmarkEntityEntryGenNumTestInstancesRunning 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.17
Number of test instances currently running.
                       cienaCesBenchmarkEntityEntryBwAvailable 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.18
Bandwidth available for test traffic if a reflector. Bandwidth remaining for other test instances to be started if a generator.
                       cienaCesBenchmarkEntityEntryGenBwUsedByRunningTests 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.19
Bandwidth currently used by test instances currently running, in Mbps.
                       cienaCesBenchmarkEntityEntryAvailableHwSessions 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.20
Maximum number of simultaneous hardware sessions available on this platform.
                       cienaCesBenchmarkEntityEntryAllocatedHwSessions 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.21
The number of allocated hardware sessions
                       cienaCesBenchmarkEntityEntryRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.22
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
                       cienaCesBenchmarkEntityEntryClearStats 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.23
Set to true to clear all global fpga counters for the given entity. Clear is only allowed for a reflector if no test instances are enabled, and for a generator if no test instances are running. The value is reset to false once the transaction is completed.
                       cienaCesBenchmarkEntityEntryReflectorMacValidation 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.24
This attribute is only valid for the reflector entity and indicates whether the reflector verifies that the destination MAC of the test frames matches the MAC address associated with benchamrk reflector entity. MAC Validation can only be disabled (False) in out-if-service or evc/vid-out-of-service mode.
               cienaCesBenchmarkEntityStatsTable 1.3.6.1.4.1.1271.2.1.39.1.1.3
Table of benchmark entity statistics entries.
                   cienaCesBenchmarkEntityStatsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.3.1
BENCHMARK Entity characteristics.
                       cienaCesBenchmarkEntityStatsEntryClear 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.1
Set to true to clear all port and/or global fpga counters for the given entity. Clear is only allowed for a reflector if no test instances are enabled, and for a generator if no test instances are running. The value is reset to False once the transaction is completed. This has been obsoleted by cienaCesBenchmarkEntityEntryClearStats.
                       cienaCesBenchmarkEntityStatsEntryPortTxBytes 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.2
Number of bytes transmitted by the benchmark port
                       cienaCesBenchmarkEntityStatsEntryPortTxPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.3
Number of packets transmitted by the benchmark port
                       cienaCesBenchmarkEntityStatsEntryPortTxCrcErrorPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.4
Number of packets with CRC errors
                       cienaCesBenchmarkEntityStatsEntryPortTxUcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.5
Number of unicast packets transmitted by the benchmark port
                       cienaCesBenchmarkEntityStatsEntryPortTxMcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.6
Number of multicast packets transmitted by the benchmark port
                       cienaCesBenchmarkEntityStatsEntryPortTxBcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.7
Number of broadcast packets transmitted by the benchmark port
                       cienaCesBenchmarkEntityStatsEntryPortRxUndersizePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.8
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       cienaCesBenchmarkEntityStatsEntryPortRxOversizePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.9
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       cienaCesBenchmarkEntityStatsEntryPortRxFragmentsPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.10
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       cienaCesBenchmarkEntityStatsEntryPortRxJabbersPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.11
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       cienaCesBenchmarkEntityStatsEntryPortTxPausePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.12
The transmit pause packets for the port.
                       cienaCesBenchmarkEntityStatsEntryPortTxDropPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.13
The total number of dropped packets on the benchmark port when traffic profiles are enabled (311v only).
                       cienaCesBenchmarkEntityStatsEntryPortTxDiscardPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.14
The total number of discarded packets.
                       cienaCesBenchmarkEntityStatsEntryPortTxLOutRangePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.15
The transmit length out of range packet count.
                       cienaCesBenchmarkEntityStatsEntryPortTx64OctsPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.16
Number of 64-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx65To127Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.17
Number of 64 to 127-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx128To255Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.18
Number of 128 to 255-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx256To511Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.19
Number of 256 to 511-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx512To1023Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.20
Number of 512 to 1023-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx1024To1518Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.21
Number of 1024 to 1518-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx1519To2047Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.22
Number of 1519 to 2047-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx2048To4095Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.23
Number of 2048 to 4095-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortTx4096To9216Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.24
Number of 4096 to 9216-byte packets transmitted on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxBytes 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.25
Number of bytes received on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.26
Number of packets received on the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxExDeferPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.27
Number of excessive deferred packets.
                       cienaCesBenchmarkEntityStatsEntryPortRxDeferPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.28
Number of deferred packets.
                       cienaCesBenchmarkEntityStatsEntryPortRxGiantPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.29
Number of too big packets.
                       cienaCesBenchmarkEntityStatsEntryPortRxUnderRunPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.30
Underrun packet count for the benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxCrcErrorPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.31
Number of packets received with CRC errors.
                       cienaCesBenchmarkEntityStatsEntryPortRxLCheckErrorPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.32
Number of packets with length check errors.
                       cienaCesBenchmarkEntityStatsEntryPortRxLOutRangePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.33
The number of frames received by the benchmark port that exceeded the maximum permitted frame size.
                       cienaCesBenchmarkEntityStatsEntryPortRxPausePkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.34
The total receive pause packets for the port.
                       cienaCesBenchmarkEntityStatsEntryPortRxUcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.35
The total number of unicast packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxMcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.36
The total number of multicast packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRxBcastPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.37
The total number of broadcast packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx64OctsPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.38
The total number of 64-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx65To127Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.39
The total number of 65 to 127-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx128To255Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.40
The total number of 128 to 255-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx256To511Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.41
The total number of 256 to 511-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx512To1023Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.42
The total number of 512 to 1023-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx1024To1518Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.43
The total number of 1024 to 1518-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx1519To2047Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.44
The total number of 1519 to 2047-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx2048To4095Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.45
The total number of 2048 to 4095-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryPortRx4096To9216Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.46
The total number of 4096 to 9216-byte packets received by benchmark port.
                       cienaCesBenchmarkEntityStatsEntryFpgaMissClassPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.47
Test packets received that didnt match any enabled test session.
                       cienaCesBenchmarkEntityStatsEntryFpgaCrcErrPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.48
Test packets received with CRC errors
                       cienaCesBenchmarkEntityStatsEntryFpgaUdpChkSumErrPkts 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.49
Test packets received with UDP checksum errors
               cienaCesBenchmarkEmixSequenceTable 1.3.6.1.4.1.1271.2.1.39.1.1.4
Table providing the list of configured EMIX sequences on this node.
                   cienaCesBenchmarkEmixSequenceEntry 1.3.6.1.4.1.1271.2.1.39.1.1.4.1
EMIX sequence entry.
                       cienaCesBenchmarkEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.1
Unique Id of the EMIX sequence entry
                       cienaCesBenchmarkEmixSequenceName 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.2
Name of this EMIX sequence
                       cienaCesBenchmarkEmixSequence 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.3
EMIX sequence which is a sequence of up to 16 letters from the following set, that can be repeated, where each letter is associated with the frame size below it: a b c d e f g h u v w x 64 128 256 512 1024 1280 1518 MTU custom 84 68 88 The u frame size is user configurable via the cienaCesBenchmarkEmixSequenceUFrameSize attribute while the h frame size is the maximum frame size configured at the entity level. If the h frame size is not configured at the entity level, h takes the value of the maximum frame size of the port under test. Letter v is the minimum frame size for IPv6 untagged or dot1q test frames, w is the minimum for IPv4 qinq test frames, and x is the minimum for IPv6 qinq test frames. The EMIX character set is available via table cienaCesBenchmarkEmixCharacterSetTable.
                       cienaCesBenchmarkEmixSequenceUFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.4
The frame size associated with the u letter in the given sequence. The default value is 594.
                       cienaCesBenchmarkEmixSequenceNumOfRef 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.5
Number of generator test profiles currently using this EMIX sequence for testing. If this is the default EMIX sequence set in the generator, that also count as one reference.
                       cienaCesBenchmarkEmixSequenceUserCreated 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.6
Flag indicating whether this sequence was created by the user or by the system at initialization. Only user created sequences are editable.
                       cienaCesBenchmarkEmixSequenceRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.7
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
               cienaCesBenchmarkEmixFrameSizeTable 1.3.6.1.4.1.1271.2.1.39.1.1.5
Table providing the list of frame sizes associated with the specified EMIX sequence Id.
                   cienaCesBenchmarkEmixFrameSizeEntry 1.3.6.1.4.1.1271.2.1.39.1.1.5.1
Frame size associated with given EMIX sequence ID and frame size index on a given Entity
                       cienaCesBenchmarkEmixFrameSizeIndex 1.3.6.1.4.1.1271.2.1.39.1.1.5.1.1
Index of frame size in array of frame sizes for the given EMIX sequence.
                       cienaCesBenchmarkEmixFrameSizeEntryFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.5.1.2
Frame size associated with the letter at the position given by cienaCesBenchmarkEmixFrameSizeIndex in the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId.
               cienaCesBenchmarkEmixAvgFrameSizeTable 1.3.6.1.4.1.1271.2.1.39.1.1.6
Table providing the average frame size associated with the specified EMIX sequence Id on a given Entity.
                   cienaCesBenchmarkEmixAvgFrameSizeEntry 1.3.6.1.4.1.1271.2.1.39.1.1.6.1
Average frame size associated with given EMIX sequence ID and Entity. Only valid for Generator entities.
                       cienaCesBenchmarkEmixAvgFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.6.1.1
Average frame size for the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId on the generator entity with Id cienaCesBenchmarkEntityEntryId.
               cienaCesBenchmarkKpiProfileTable 1.3.6.1.4.1.1271.2.1.39.1.1.7
Table providing the list of configured Key Performance Indicator profiles on this node.
                   cienaCesBenchmarkKpiProfileEntry 1.3.6.1.4.1.1271.2.1.39.1.1.7.1
Hw session allocation entry.
                       cienaCesBenchmarkKpiProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.1
Unique Id of the KPI profile entry
                       cienaCesBenchmarkKpiProfileName 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.2
Name of a the KPI profile
                       cienaCesBenchmarkKpiProfileNumOfRef 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.3
Number of generator test profiles currently using this KPI profile for results analysis. If this is the default KPI profile set in the generator, that also count as one reference.
                       cienaCesBenchmarkKpiProfileRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.4
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
               cienaCesBenchmarkKpiPcpColorTable 1.3.6.1.4.1.1271.2.1.39.1.1.8
Table providing the list of configured Key Performance Indicator per KPI profile, per PCP and per Color.
                   cienaCesBenchmarkKpiPcpColorEntry 1.3.6.1.4.1.1271.2.1.39.1.1.8.1
Entry for the KPI values for the given KPI profile, PCP and color.
                       cienaCesBenchmarkKpiPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.1
Index for the PCP
                       cienaCesBenchmarkKpiColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.2
Index for the PCP
                       cienaCesBenchmarkKpiPcp 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.3
PCP value associated with this entry
                       cienaCesBenchmarkKpiColor 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.4
Traffic color, green or yellow, associated with these KPIs.
                       cienaCesBenchmarkKpiThroughput 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.5
Throughput KPI for the given KPI profile, PCP and color expressed in percent of bandwidth * 10000 to provide a 4 decimal point value.
                       cienaCesBenchmarkKpiFrameloss 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.6
Frameloss KPI for the given KPI profile, PCP and color expressed in percent of bandwidth * 10000 to provide a 4 decimal point value.
                       cienaCesBenchmarkKpiLatency 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.7
Maximum latency in micro-seconds that the latency result should not exceed in order for the test to be considered a pass.
                       cienaCesBenchmarkKpiPdv 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.8
Maximum PDV in micro-seconds that the PDV test result should not exceed in order for the test to be considered a pass.
               cienaCesBenchmarkBwAllocProfileTable 1.3.6.1.4.1.1271.2.1.39.1.1.9
Table providing the list of configured bandwidth allocation profiles on this node.
                   cienaCesBenchmarkBwAllocProfileEntry 1.3.6.1.4.1.1271.2.1.39.1.1.9.1
BW allocation profile entry
                       cienaCesBenchmarkBwAllocProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.1
Unique Id of the bandwidth allocation profile entry
                       cienaCesBenchmarkBwAllocProfileName 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.2
Name of a the bandwidth allocation profile
                       cienaCesBenchmarkBwAllocProfileNumOfRef 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.3
Number of generator test profiles currently using this bandwidth allocation profile for testing. If this is the default BW allocation profile set in the generator, that also count as one reference.
                       cienaCesBenchmarkBwAllocProfileRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.4
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
               cienaCesBenchmarkBwRatioTable 1.3.6.1.4.1.1271.2.1.39.1.1.10
Table providing the list of configured bandwidth ratio per profile, per PCP.
                     cienaCesBenchmarkBwRatioEntry 1.3.6.1.4.1.1271.2.1.39.1.1.10.1
Entry for bandwidth percent per BW Allocation profile and PCP
                         cienaCesBenchmarkBwRatioPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.1
Index for the PCP
                         cienaCesBenchmarkBwRatioPcp 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.2
PCP value associated with this entry.
                         cienaCesBenchmarkBwRatio 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.3
Ratio of test bandwidth to allocate to the test session with this PCP value.
               cienaCesBenchmarkProfileTable 1.3.6.1.4.1.1271.2.1.39.1.1.11
Table of profile entries.
                     cienaCesBenchmarkProfileEntry 1.3.6.1.4.1.1271.2.1.39.1.1.11.1
BENCHMARK Profile characteristics.
                         cienaCesBenchmarkProfileEntryId 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.1
Index for BENCHMARK profile records.
                         cienaCesBenchmarkProfileEntryName 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.2
Name of the profile as entered when created.
                         cienaCesBenchmarkProfileEntryBandwidth 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.3
Maximum bandwidth to use when generating green test traffic for the profile.
                         cienaCesBenchmarkProfileEntryExcessBandwidth 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.4
Maximum bandwidth to use when generating yellow test traffic for the profile. When testing for red color, this bandwidth is multiplied by 1.25
                         cienaCesBenchmarkProfileEntryInterval 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.5
Interval between the start of one test group to the start of the next test group.
                         cienaCesBenchmarkProfileEntryDuration 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.6
Duration of the testing. The test group is repeated until the duration ends. When indefinite is set, test group is run only once to completion
                         cienaCesBenchmarkProfileEntrySetFrameSizeList 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.7
Used to replace the existing frame size table with the specified list. More than one values can be listed and are separated by commas.
                         cienaCesBenchmarkProfileEntryMaxSearches 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.8
For the throughput test, this is the maximum number of searches to find a transmit rate without drops for a given frame size.
                         cienaCesBenchmarkProfileEntryMaxSamples 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.9
For the latency and PDV tests, this is the number of samples to take in order to determine the min, avg and max latency and avg PDV.
                         cienaCesBenchmarkProfileEntrySamplingInterval 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.10
For the latency and PDV tests, this is the interval, in 100ms, to wait between samples.
                         cienaCesBenchmarkProfileEntryFrameLossStartBw 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.11
For the frame loss test, this indicates which bandwidth value to use as the starting bandwidth; the maximum bandwidth determined via the throughput test, the bandwidth parameter configured in the profile, or the maximum bandwidth of the link. The value maximumLineRate(3) is not supported.
                         cienaCesBenchmarkProfileEntryVidValidation 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.12
Indicates whether VID validation is performed in the classifier or not on the returning packet. If vid validation is set to false, PCP and Color validation are ignored and automatically become false.
                         cienaCesBenchmarkProfileEntryPcpValidation 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.13
Used to indicate whether the PCP value of the test packet should be used to classifier the reflected packets or not. When color remarking is used, this should be set to false. Default is true.
                         cienaCesBenchmarkProfileEntryColorValidation 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.14
Used to indicate whether the color bit of the test packet should be used to classifier the reflected packets or not. In color unaware testing, this should be set to false. Default is true.
                         cienaCesBenchmarkProfileEntryKpiProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.15
Name of a valid KPI profile, from the cienaCesBenchmarkKpiProfileTable, to use when analysing the test results for this profile.
                         cienaCesBenchmarkProfileEntryBwAllocProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.16
Id of a valid Bandwidth Allocation profile, from the cienaCesBenchmarkBwAllocProfileTable, used for distributing the profile bandwidth amongst the configured PCP values for this profile when running tests.
                         cienaCesBenchmarkProfileEntryEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.17
Id of a valid EMIX sequence configured in the cienaCesBenchmarkEmixSequenceTable, to use when y1564 is selected. The EMIX sequence is used instead of the frame size list if and only if y1564 is selected.
                         cienaCesBenchmarkProfileEntryEncapType 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.18
Encapsulation type to use for generated packets.
                         cienaCesBenchmarkProfileEntryPduType 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.19
Vlan tag protocol identifier to use for the generated packets.
                         cienaCesBenchmarkProfileEntryDstmac 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.20
MAC address to use as the destination MAC address on the generated packets.
                         cienaCesBenchmarkProfileEntrySVid 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.21
S-VLAN ID to used for generated packets when encapType is set to QinQ
                         cienaCesBenchmarkProfileEntrySPcp 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.22
Bitmap of the S-VLAN PCP (Priority Code Point) value to test with. When RFC2544 test is enabled, only one PCP can be set in the mask. Otherwise, a test session will be run for each PCP bit set. Used when the encapType set to QinQ
                         cienaCesBenchmarkProfileEntrySColor 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.23
Color of the S-VLAN tag for the test traffic. This is directly related to the value of the DEI bit configured in the VLAN tag of the test traffic. Green traffic will have its DEI bit set to 0 while Yellow traffic will have its DEI bit set to 1. Green test traffic is generated based on the bandwidth configured in the test profile. Yellow traffic is generated based on the excess-bandwidth parameter. Finally, if the user selects green-yellow-red, the yellow traffic is generated at 1.25 * excess-bandwidth. This is used only when encapType is set to QinQ
                         cienaCesBenchmarkProfileEntryCVid 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.24
C-VLAN ID to used for generated packets when encapType is set to QinQ or dot1q.
                         cienaCesBenchmarkProfileEntryCPcp 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.25
Bitmap of the C-VLAN PCP (Priority Code Point) value to test with. When RFC2544 test is enabled, only one PCP can be set in the mask. Otherwise, a test session will be run for each PCP bit set. Only used when the encapType is set to dot1q. In the QinQ type, the c-pcp of the test packet takes the same value as the s-pcp to simplify software.
                         cienaCesBenchmarkProfileEntryCColor 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.26
Color of the C-VLAN tag for the test traffic. This is directly related to the value of the DEI bit configured in the VLAN tag of the test traffic. Green traffic will have its DEI bit set to 0 while Yellow traffic will have its DEI bit set to 1. Green test traffic is generated based on the bandwidth configured in the test profile. Yellow traffic is generated based on the excess-bandwidth parameter. Finally, if the user selects green-yellow-red, the yellow traffic is generated at 1.25 * excess-bandwidth. This is used only when encapType is set to dot1q. In a QinQ configuration, the c-dei bit is set to the same value as the s-dei bit in order to simplify software.
                         cienaCesBenchmarkProfileEntryTpid 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.27
Vlan tag protocol identifier to use for the generated packets. The following TPID values are supported by benchmark: 0x8100 0x9100 0x88A8
                         cienaCesBenchmarkProfileEntryDscp 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.28
IP DSCP value to use for the generated packets.
                         cienaCesBenchmarkProfileEntrySrcInetAddrType 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.29
Specifies the type of address cienaCesBenchmarkProfileEntrySrcInetAddr belongs to. When set to: ipv4 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with InetAddressIPv6 from RFC 4001. The InetAddressType and the InetAddress must be set as part of the same SNMP SET request.
                         cienaCesBenchmarkProfileEntrySrcInetAddr 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.30
Specifies the unicast source IP address to use in IP test packet. The InetAddress specified here is compliant with RFC 4001. The InetAddressType and the InetAddress must be set as part of the same SNMP SET request.
                         cienaCesBenchmarkProfileEntryDstInetAddrType 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.31
Specifies the type of address cienaCesBenchmarkProfileEntryDstInetAddr belongs to. When set to: ipv4 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with InetAddressIPv6 from RFC 4001. The InetAddressType and the InetAddress must be set as part of the same SNMP SET request.
                         cienaCesBenchmarkProfileEntryDstInetAddr 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.32
Specifies the unicast destination IP address to use in IP test packet. The InetAddress specified here is compliant with RFC 4001. The InetAddressType and the InetAddress must be set as part of the same SNMP SET request.
                         cienaCesBenchmarkProfileEntryCustomPayload 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.33
Custom payload to be used on the generated packets.
                         cienaCesBenchmarkProfileEntryThroughputTest 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.34
Run throughput test
                         cienaCesBenchmarkProfileEntryFramelossTest 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.35
Run frame loss test
                         cienaCesBenchmarkProfileEntryLatencyTest 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.36
Run latency test
                         cienaCesBenchmarkProfileEntryPdvTest 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.37
Run packet delay variation test
                         cienaCesBenchmarkProfileEntryBurstTest 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.38
Run packet burst test
                         cienaCesBenchmarkProfileEntryRfc2544Suite 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.39
Run RFC2544 test suite which includes throughput, frame loss and latency tests
                         cienaCesBenchmarkProfileEntryY1564Test 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.40
The Y1564 test includes the throughput, frameloss, latency and PDV tests are is run using the configured EMIX sequence. If the profiles EMIX sequence is not configured, the default generator EMIX sequence is used. Y1564 and RFC2544 are mutually exclusive.
                         cienaCesBenchmarkProfileEntryHwSessionsRequired 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41
This represents the number of hardware sessions required to enable/run a test instance using this profile according to the profiles current configuration. One hardware session is required for each outer tag PCP and color configured. Ex 1) Encap type set to dot1q, c-pcp is 0,3 and c-color is set to green, 2 PCPs * 1 color = 2 hw sessions. Ex 2) Encap type set to qinq, s-pcp is 0,4,5 and s-color is set to green-yellow, then you need 3 PCPs * 2 colors = 6 hw sessions. Ex 3) Encap type set to untagged, only 1 hw session is required.
                         cienaCesBenchmarkProfileEntryNumOfRef 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.42
Number of generator test instances currently using this test profile for testing.
                         cienaCesBenchmarkProfileEntryRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.43
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
               cienaCesBenchmarkTestInstanceTable 1.3.6.1.4.1.1271.2.1.39.1.1.12
Table of test instance entries.
                     cienaCesBenchmarkTestInstanceEntry 1.3.6.1.4.1.1271.2.1.39.1.1.12.1
BENCHMARK test instance characteristics.
                         cienaCesBenchmarkTestInstanceEntryId 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.1
Unique identifier for the test instance.
                         cienaCesBenchmarkTestInstanceEntryName 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.2
Unique name given to the test instance at creation time.
                         cienaCesBenchmarkTestInstanceEntrySubPortId 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.3
ID of the sub-port to base this test instance on. The sub-port has to be a child of the port under test associated with an existing entity.
                         cienaCesBenchmarkTestInstanceEntryProfileId 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.4
Id of an existing test profile to be used with the test instance as the template for testing. A test profile ID has to be specified if this test instance is associated with a generator entity. If its a reflector test instance, a profile ID CANNOT be specified, it has to remain set 0.
                         cienaCesBenchmarkTestInstanceEntrySvid 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.5
S VLAN ID to use for testing. For generator test instances, this over-writes the value defined in the referenced test profile if applicable (encap-type set to qinq). For reflector test instances, this has to be set to a valid s-vid accepted by the associated sub-port. A value of 0xFFFF indicates ANY s-vid. A value of 0 indicates untagged or single-tagged traffic.
                         cienaCesBenchmarkTestInstanceEntryCvid 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.6
C VLAN ID to use for testing. For generator test instances, this over-writes the value defined in the referenced test profile if applicable (encap-type set to dot1q or qinq). For reflector test instances, this has to be set to a valid c-vid accepted by the associated sub-port. A value of 0xFFFF indicates ANY c-vid, while a value of 0 indicates untagged (s-vid also has to be set to 0).
                         cienaCesBenchmarkTestInstanceEntryUntagged 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.7
When set to true, this indicates that the test instance is to be associated with untagged data traffic. When this is set, the cvid and svid parameters must be 0.
                         cienaCesBenchmarkTestInstanceEntryDstMac 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.8
Destination MAC address to use for generator test instances. When set, this over writes the value specified in the referenced test profile. This field is not applicable for reflector test instances.
                         cienaCesBenchmarkTestInstanceEntryAdminState 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.9
Indicates the administrative state of the test instance. Upon enabling a test instance, resources are allocated in hardware. For reflector test instances, this triggers the start of reflection of any test traffic received that matches the specified svid:cvid combination on the specified sub-port.
                         cienaCesBenchmarkTestInstanceEntryStarted 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.10
Applicable to generator test instances, this indicates whether testing is in progress or not. Setting this attribute to true will initiate testing.
                         cienaCesBenchmarkTestInstanceEntryCurrentInterval 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.11
Applicable to generator test instances, this indicates the number of intervals of the selected tests have been run, including the current one, in relation to the total number of intervals to complete. This is based on the profiles interval and duration configured.
                         cienaCesBenchmarkTestInstanceEntryTotalIntervals 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.12
Applicable to generator test instances, this indicates the total number of intervals of the selected tests to be run by a single start command on the test instance. This is based on the profiles interval and duration configured. A value of 0 should be interpreted as unknown and -1 as indefinite.
                         cienaCesBenchmarkTestInstanceEntryLastIterStart 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.13
Date and time of the last iteration that started since the last time the system was rebooted or the statistics were cleared on the test instance.
                         cienaCesBenchmarkTestInstanceEntryClearStats 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.14
Set to true to clear the results and counters for the test instance.
                         cienaCesBenchmarkTestInstanceEntryRowStatus 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.15
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to createAndGo. To delete a row in this table, set this object to destroy. If the entry exists, it is displayed as active.
                         cienaCesBenchmarkTestInstanceEntryAssocEntityId 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.16
ID of the entity this test instance is associated with (cienaCesBenchmarkEntityEntryId)
                         cienaCesBenchmarkTestInstanceEntryOperState 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.17
Indicates the operational state of the test instance. When a generator test instance is operationally enabled it means the test is running and traffic is being generated. When a reflector test instance is operationally enabled it means that reflection is active on the specified svid:cvid combination. Use the cienaCesBenchmarkTestInstanceEntryAdminState to enable/disable a test instance since this field is read-only and meant to capture operational state.
                         cienaCesBenchmarkTestInstanceEntryConnectivityTest 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.18
Applicable to generator test instances, this field is used to trigger a connectivity test on the test instance. Setting the value to true will trigger the test by transmitting 10 packets. If no error is returned then the test has passed. If a commit error is received then the test has failed.
               cienaCesBenchmarkGenTestSessionAllocationTable 1.3.6.1.4.1.1271.2.1.39.1.1.13
Table providing the allocation of hw test session per generator test instance Id, PCP and color.
                     cienaCesBenchmarkGenTestSessionAllocationEntry 1.3.6.1.4.1.1271.2.1.39.1.1.13.1
Test session (aka hardware session) allocation entry. SPECIAL NOTE: It is important to know that when the associated test profiles encapsulation type is set to untagged, the last two elements of the index (PCP and color) are fixed at 1.1. The management software needs to query using index <entidyId>.<testInstandceId>.1.1 in this case, since PCP and color are irrelevant in the untagged test traffic scenario.
                         cienaCesBenchmarkGenTestSessionPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.1
PCP Index.
                         cienaCesBenchmarkGenTestSessionColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.2
Color Index.
                         cienaCesBenchmarkGenTestSessionPcp 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.3
PCP value associated with this hw session
                         cienaCesBenchmarkGenTestSessionColor 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.4
Color of test traffic associated with this hardware session
                         cienaCesBenchmarkGenTestSessionId 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.5
Id of the hardware session allocated to the given test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.6
EMIX sequence Id used with this session. If zero, it indicates that the the frame size list is being used for the test and cienaCesBenchmarkGenTestSessionCurrentPktSize indicates which packet size is currently being tested.
                         cienaCesBenchmarkGenTestSessionCurrentPktSize 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.7
Packet size in bytes currently used by the running test.
                         cienaCesBenchmarkGenTestSessionThroughputTestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.8
State of the throughput test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionFramelossTestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.9
State of the frameloss test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionLatencyTestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.10
State of the latency test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionPdvTestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.11
State of the PDV test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionRfc2544TestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.12
State of the RFC2544 test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionY1564TestState 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.13
State of the Y1564 test for this hardware session defined by the test instance id, pcp and color
                         cienaCesBenchmarkGenTestSessionCurrentRate 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.14
Traffic rate currently used to generate packets as percent of the line rate
                         cienaCesBenchmarkGenTestSessionSamplesCompleted 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.15
When latency and/or pdv is running, this indicates how many samples have been gathered so far.
               cienaCesBenchmarkTestInstanceStatsTable 1.3.6.1.4.1.1271.2.1.39.1.1.14
Table of test instance packet statistics entries.
                     cienaCesBenchmarkTestInstanceStatsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.14.1
Benchmark test instance packet statistics
                         cienaCesBenchmarkTestInstanceStatsRxPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.1
Total number of received packets for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxIpv4Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.2
Total number of IPv4 packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxIpv4UdpPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.3
Total number of IPv4 UDP packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxIpv6Pkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.4
Total number of IPv6 packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxIpv6UdpPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.5
Total number of IPv6 UDP packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxNonIpPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.6
Total number of non-IP packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxUnrecognizedPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.7
Total number of unrecognized packets received for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.8
Total number of packets received with a duplicate this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxDuplicatePktsOverflow 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.9
When set to true, this indicates that the duplicate pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts might not be accurate.
                         cienaCesBenchmarkTestInstanceStatsRxOOOPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.10
Total number of packets received with an out of order sequence number. The sequence number was less than the expected sequence number for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxOOOPktsOverflow 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.11
When set to true, this indicates that the out of order pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstanceStatsRxOOOPkts might not be accurate.
                         cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.12
Total number of packets received with a sequence number greater then the expected sequence number for this test instance.
                         cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsOverflow 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.13
When set to true, this indicates that the discontinuity in sequence number pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts might not be accurate.
                         cienaCesBenchmarkTestInstanceStatsRxUdpCheckSumPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.14
Total number of UDP packets received with a UDP checksum error.
                         cienaCesBenchmarkTestInstanceStatsTxPkts 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.15
Total number of packets transmitted for this test instance.
               cienaCesBenchmarkGenTestSessionThroughputResultsTable 1.3.6.1.4.1.1271.2.1.39.1.1.15
Table of BENCHMARK generator test session throughput results in Mbps.
                     cienaCesBenchmarkGenTestSessionThroughputResultsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.15.1
BENCHMARK generator test session throughput results.
                         cienaCesBenchmarkGenTestSessionThroughputResultsPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.1
Index of the PCP value
                         cienaCesBenchmarkGenTestSessionThroughputResultsColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.2
Color index.
                         cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndex 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.3
Frame size index for which those throughput results are for. When EMIX is used, in which case cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId is not NULL, there is only one frame size index for the given test instance Id, pcp and color. In such a case, the frame size index will be 0 and frame size will also be 0.
                         cienaCesBenchmarkGenTestSessionThroughputResultsPcp 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.4
PCP value of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionThroughputResultsColor 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.5
Color of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionThroughputResultsFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.6
Packet size in bytes. If 0, then the cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId indicates the ID of the EMIX sequence used for the test
                         cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.7
ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated with these results.
                         cienaCesBenchmarkGenTestSessionThroughputResultsMin 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.8
Minimum throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be divided by 100 when displayed to provide a 2 decimal point accuracy. A result of 123.45 is sent as 12345.
                         cienaCesBenchmarkGenTestSessionThroughputResultsMax 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9
Maximum throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be divided by 100 when displayed to provide a 2 decimal point accuracy. A result of 123.45 is sent as 12345.
                         cienaCesBenchmarkGenTestSessionThroughputResultsAvg 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.10
Average throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be divided by 100 when displayed to provide a 2 decimal point accuracy. A result of 123.45 is sent as 12345.
                         cienaCesBenchmarkGenTestSessionThroughputResultsIterations 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.11
Number of times the test has been run for this packet size.
                         cienaCesBenchmarkGenTestSessionThroughputResultsKpiResult 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.12
Pass or fail results for the test which is determined by comparing the max throughput against the selected KPI test instances throughput pass criteria. If no KPI test instance is selected for the given test instance Id, the result will be notApplicable.
               cienaCesBenchmarkGenTestSessionFramelossResultsTable 1.3.6.1.4.1.1271.2.1.39.1.1.16
Table of BENCHMARK generator test session frameloss results.
                     cienaCesBenchmarkGenTestSessionFramelossResultsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.16.1
BENCHMARK generator test session frameloss results.
                         cienaCesBenchmarkGenTestSessionFramelossResultsPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.1
PCP index.
                         cienaCesBenchmarkGenTestSessionFramelossResultsColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.2
Color index.
                         cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndex 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.3
Frame size index.
                         cienaCesBenchmarkGenTestSessionFramelossResultsRateIndex 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.4
Rate index.
                         cienaCesBenchmarkGenTestSessionFramelossResultsPcp 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.5
PCP value of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionFramelossResultsColor 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.6
Color of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionFramelossResultsFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.7
Packet size in bytes. If 0, then the cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId indicates the ID of the EMIX sequence used for the test
                         cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.8
ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated with these results.
                         cienaCesBenchmarkGenTestSessionFramelossResultsRate 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.9
Rate in percent of line rate.
                         cienaCesBenchmarkGenTestSessionFramelossResultsFirst 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.10
Percentage of frames lost on first test sequence.
                         cienaCesBenchmarkGenTestSessionFramelossResultsSecond 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.11
Percentage of frames lost on second test sequence.
                         cienaCesBenchmarkGenTestSessionFramelossResultsKpiResult 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.12
Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instances frameloss pass criteria. If no KPI test instance is selected for the given test instance Id, the result will be notApplicable.
                         cienaCesBenchmarkGenTestSessionFramelossResultsResult 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.13
Percentage of frames lost on the largest test sequence results.
               cienaCesBenchmarkGenTestSessionLatencyResultsTable 1.3.6.1.4.1.1271.2.1.39.1.1.17
Table of BENCHMARK generator test session latency results in usec.
                     cienaCesBenchmarkGenTestSessionLatencyResultsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.17.1
BENCHMARK generator test session latency results.
                         cienaCesBenchmarkGenTestSessionLatencyResultsPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.1
PCP index.
                         cienaCesBenchmarkGenTestSessionLatencyResultsColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.2
Color index.
                         cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndex 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.3
Frame size index.
                         cienaCesBenchmarkGenTestSessionLatencyResultsPcp 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.4
PCP value of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionLatencyResultsColor 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.5
Color of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionLatencyResultsFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.6
Packet size in bytes.
                         cienaCesBenchmarkGenTestSessionLatencyResultsEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.7
ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated with these results.
                         cienaCesBenchmarkGenTestSessionLatencyResultsMin 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.8
Minimum latency recorded for the given packet size.
                         cienaCesBenchmarkGenTestSessionLatencyResultsMax 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.9
Maximum latency recorded for the given packet size.
                         cienaCesBenchmarkGenTestSessionLatencyResultsAvg 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.10
Average latency recorded for the given packet size.
                         cienaCesBenchmarkGenTestSessionLatencyResultsSamples 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.11
Number of samples taken during the test.
                         cienaCesBenchmarkGenTestSessionLatencyResultsKpiResult 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.12
Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instances latency pass criteria. If no KPI test instance is selected for the given test instance Id, the result will be notApplicable.
               cienaCesBenchmarkGenTestSessionPdvResultsTable 1.3.6.1.4.1.1271.2.1.39.1.1.18
Table of BENCHMARK generator test session packet delay variation results in usec.
                     cienaCesBenchmarkGenTestSessionPdvResultsEntry 1.3.6.1.4.1.1271.2.1.39.1.1.18.1
BENCHMARK generator test session packet delay variation results.
                         cienaCesBenchmarkGenTestSessionPdvResultsPcpIndex 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.1
PCP index.
                         cienaCesBenchmarkGenTestSessionPdvResultsColorIndex 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.2
Color index.
                         cienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndex 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.3
Frame size index associated to those PDV stats.
                         cienaCesBenchmarkGenTestSessionPdvResultsPcp 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.4
PCP value of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionPdvResultsColor 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.5
Color of the test packets associated with those results.
                         cienaCesBenchmarkGenTestSessionPdvResultsFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.6
Packet size in bytes.
                         cienaCesBenchmarkGenTestSessionPdvResultsEmixSequenceId 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.7
ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated with these results.
                         cienaCesBenchmarkGenTestSessionPdvResultsAvg 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.8
Average PDV recorded for the given packet size.
                         cienaCesBenchmarkGenTestSessionPdvResultsSamples 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.9
Number of samples used for the test.
                         cienaCesBenchmarkGenTestSessionPdvResultsKpiResult 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.10
Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instances throughput PDV criteria. If no KPI test instance is selected for the given test instance Id, the result will be notApplicable.
               cienaCesBenchmarkEmixCharacterSetTable 1.3.6.1.4.1.1271.2.1.39.1.1.19
Table of BENCHMARK EMIX character set providing the list of characters that can be used in an EMIX sequence along with their corresponding frame size.
                     cienaCesBenchmarkEmixCharacterSetEntry 1.3.6.1.4.1.1271.2.1.39.1.1.19.1
BENCHMARK EMIX character and its associated frame size.
                         cienaCesBenchmarkEmixCharacterSetEntryIndex 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.1
Character index.
                         cienaCesBenchmarkEmixCharacterSetEntryCharacter 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.2
EMIX character that can be used for creating an EMIX sequence. The character set currently includes: a b c d e f g h u v w x
                         cienaCesBenchmarkEmixCharacterSetEntryFrameSize 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.3
Frame size associated with the character. For h, the frame size is the port under tests MTU and the u character is a custom frame size configurable for each EMIX. The u frame size can take a value of 64 to 10000 and defaults to 594. If u is bigger than the MTU of the port under test, it will be reduced to the same size as h.
 cienaCesBenchmarkNotifications 1.3.6.1.4.1.1271.2.2.39
       cienaCesBenchmarkTestStarted 1.3.6.1.4.1.1271.2.2.39.1
The start command has been issued for the given benchmark generator test instance, either via CLI or SNMP. The cienaCesBenchmarkEntityEntryPortId specifies the port under test when the test instance was started; the s-vid, c-vid and destination mac address used to build the test packet are also provided.
       cienaCesBenchmarkTestStopped 1.3.6.1.4.1.1271.2.2.39.2
The specified generator test instance has been manually stopped by the user, either via CLI or SNMP, before the testing completed.
       cienaCesBenchmarkTestCompleted 1.3.6.1.4.1.1271.2.2.39.3
The testing for the specified generator test instance has finished the configured number of iterations as configured in the referenced profile interval and duration.
       cienaCesBenchmarkTestFailedThroughputKpi 1.3.6.1.4.1.1271.2.2.39.4
The throughput test result for the specified generator test instance is below the specified throughput KPI value for the given PCP and color traffic.
       cienaCesBenchmarkTestFailedFramelossKpi 1.3.6.1.4.1.1271.2.2.39.5
The frameloss test result for the specified generator test instance exceeds the specified throughput KPI value for the given PCP and color traffic.
       cienaCesBenchmarkTestFailedLatencyKpi 1.3.6.1.4.1.1271.2.2.39.6
The latency test result for the specified generator test instance exceeds the specified throughput KPI value for the given PCP and color traffic.
       cienaCesBenchmarkTestFailedPdvKpi 1.3.6.1.4.1.1271.2.2.39.7
The throughput test result for the specified generator test instance is below the specified throughput KPI value for the given PCP and color traffic.
       cienaCesBenchmarkTestIterationCompleted 1.3.6.1.4.1.1271.2.2.39.8
An iteration of tests for the given test instance has just completed.