CDX-6500-COMMON-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: CDX-6500-COMMON-MIB
Download as:   
RFC-1212, RFC1155-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500NodeMgmt 1.3.6.1.4.1.449.2.1.1
                     cdx6500NMSNMPGroup 1.3.6.1.4.1.449.2.1.1.1
                         cdx6500SNMPPrimUDPChan 1.3.6.1.4.1.449.2.1.1.1.1
The primary UDP port used by the SNMP Agent has a default value of 161.
                         cdx6500SNMPSecUDPChan 1.3.6.1.4.1.449.2.1.1.1.2
The secondary UDP port used by the SNMP Agent has a default value of 162.
                         cdx6500SNMPAgentTimer 1.3.6.1.4.1.449.2.1.1.1.3
An internal timer used by the SNMP agent, unit is a 20 ms tick.
                         cdx6500SNMPTrapEnable 1.3.6.1.4.1.449.2.1.1.1.4
A control object to disable or enable the SNMP agents trap send capability. newvalDisable : same functionality as disable, new enumeration added for RFC1155 compatibility.
                         cdx6500SNMPBootAgent 1.3.6.1.4.1.449.2.1.1.1.5
A control object. Setting to value `boot will cause the SNMP agent to boot.
                         cdx6500SNMPResetStats 1.3.6.1.4.1.449.2.1.1.1.6
A control object, which when set to value `reset, will cause the SNMP agent to reset all its statistics.
                         cdx6500SNMPLastTrap 1.3.6.1.4.1.449.2.1.1.1.7
The interesting information portion of the last trap PDU issued by the SNMP Agent.
                         cdx6500SNMPGenTrapsType 1.3.6.1.4.1.449.2.1.1.1.8
Choice between generic traps as defined in RFC or correponding enterprise specific traps to be generated by the node. This attribute is applicable only when generic traps are being generated and there exists a corresponding enterprise specific trap.
                         cdx6500SNMPTrapThrottleTable 1.3.6.1.4.1.449.2.1.1.1.9
Throttling table.
                             cdx6500SNMPTrapThrottleEntry 1.3.6.1.4.1.449.2.1.1.1.9.1
Entry representing throttling parameters.
                                 cdx6500SNMPTrapNumber 1.3.6.1.4.1.449.2.1.1.1.9.1.1
Trap number to be throttled.
                                 cdx6500SNMPMaxNumOfTraps 1.3.6.1.4.1.449.2.1.1.1.9.1.2
Number of traps allowed to be generated in the throttling period.
                                 cdx6500SNMPThrottlingPeriod 1.3.6.1.4.1.449.2.1.1.1.9.1.3
Throttling time period in seconds. Value 0 means trap is not throttled.
                                 cdx6500SNMPNewTrapLevel 1.3.6.1.4.1.449.2.1.1.1.9.1.4
New severity level for the trap.
                                 cdx6500SNMPEntryStatus 1.3.6.1.4.1.449.2.1.1.1.9.1.5
Table row status. Setting the value to deleted removes the entry from the table.
                         cdx6500SNMPSetControl 1.3.6.1.4.1.449.2.1.1.1.10
Snmp Set operation control off : snmp set operation is not allowed on : snmp set operation is allowed.
                         cdx6500SNMPIpAddress 1.3.6.1.4.1.449.2.1.1.1.11
IP address for this node.
                     cdx6500NMNodeParametersGroup 1.3.6.1.4.1.449.2.1.1.2
                         cdx6500NMNPconfig 1.3.6.1.4.1.449.2.1.1.2.1
                             cdx6500NMNPCnodeName 1.3.6.1.4.1.449.2.1.1.2.1.1
This parameter identifies the node with a name, which appears at the top of control terminal menus and reports. Range is 0 to 8 alphanumeric characters.
                             cdx6500NMNPCnodeNum 1.3.6.1.4.1.449.2.1.1.2.1.2
The node number identifies the node for X.25 routing purposes to prevent routing loops.
                             cdx6500NMNPCnodeAddress 1.3.6.1.4.1.449.2.1.1.2.1.3
The node address specifies the main part of the network address for calls destined within this node: PAD port or node resource (for example, control port) calls. Individual subaddresses specify exact destination.
                             cdx6500NMNPCchassis 1.3.6.1.4.1.449.2.1.1.2.1.4
This parameters identifies the type of chassis that this node is residing in. This is necessary in order to correctly interpret the fan and power supply status signals. newvalStandalone : same functionality as standalone, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPCdate 1.3.6.1.4.1.449.2.1.1.2.1.5
The node date used for date stamps of events and traps. The format of the string is yyyymmmdd, year: four digits, month: first three letters of the month, day: 01..31.
                             cdx6500NMNPCtime 1.3.6.1.4.1.449.2.1.1.2.1.6
The node time used for time stamps of events and traps. The format of the string is hhmmss, hour: 00..23, minute 00..59, second: 00..59.
                             cdx6500NMNPCportUtil 1.3.6.1.4.1.449.2.1.1.2.1.7
Port Utilization Threshold (%). This parameter sets the alarm level for traffic on every port in a node. The traffic is checked over a 64-second interval to give an average (in characters per second). This is compared to the ports clock rate and a utilization factor is produced. If the percent of utiliaztion exceeds the setting, an alarm is generated. Port utilization records are kept for each port and the port in question is noted in the report.
                             cdx6500NMNPCbuffUtil 1.3.6.1.4.1.449.2.1.1.2.1.8
Buffer Utilization Threshold (%). This parameter sets the alarm level for data buffers. When data passes through a node, buffers provide temporary storage. If the number of buffers used exceeds the specified percentage of available storage, an alarm is generated.
                             cdx6500NMNPCcpuUtil 1.3.6.1.4.1.449.2.1.1.2.1.9
CPU Utilization Threshold (%). If the CPU is not processing data, it is running diagnostic checks. It is never idle. This parameter specifies the amount of time spent performing non-diagnostic functions as a percentage of the total time. If this percentage exceeds the threshold, an alarm is generated.
                             cdx6500NMNPCportErr 1.3.6.1.4.1.449.2.1.1.2.1.10
Port Error Threshold. This threshold specifies the number of port errors (such as parity or framing errors) that can be detected before a medium severity alarm is generated. For example, if this parameter is set to 10, an alarm is sent when 10 errors are detected, another alarm is sent when the 20th error is detected, etc.
                             cdx6500NMNPCalarmTmr 1.3.6.1.4.1.449.2.1.1.2.1.11
Alarm Threshold Timer. This parameter prevents a node from sending threshold alarms too frequently. If a node generates an alarm the threshold alarm timer is started and the node is not allowed to generate the same alarm until the timer has expired. This controls the frequency of alarm reporting.
                             cdx6500NMNPCmaxRoutHops 1.3.6.1.4.1.449.2.1.1.2.1.12
Maximum Routing Hops.This parameter specifies the maximum number of nodes a call may pass through before reaching its destination.
                             cdx6500NMNPCctpSubAddr 1.3.6.1.4.1.449.2.1.1.2.1.13
This parameter specifies the Control Port (CTP) Subaddress. Calls with network address composed of the node address and this subaddress will be routed to the control port in this node. No routing table entry is needed.
                             cdx6500NMNPCctpIdleTime 1.3.6.1.4.1.449.2.1.1.2.1.14
Control Port Idle Disconnect Time (minutes). This specifies how many minutes of inactivity can occur before the control terminal is automatically disconnected
                             cdx6500NMNPCalmDist 1.3.6.1.4.1.449.2.1.1.2.1.15
This object has been replaced by cdx6500NMNPCalmDistrib.
                             cdx6500NMNPCalmMmem 1.3.6.1.4.1.449.2.1.1.2.1.16
Alarm Printer Mnemonic. This specifies the mnemonic name for the destination of alarms sent by the node (if Alarm Distribution = PRIN). This destination is usually a printer or a personal computer. To prevent any alarms from being sent, set this to blank.
                             cdx6500NMNPCalmSelect 1.3.6.1.4.1.449.2.1.1.2.1.17
This object has been replaced by cdx6500NMNPCalmSelection.
                             cdx6500NMNPCbroadPortSubad 1.3.6.1.4.1.449.2.1.1.2.1.18
This specifies the broadcast port subaddress for this node. Calls with network address composed of the node address and this subaddress will be routed to the broadcast port in this node. No routing table entry is needed.
                             cdx6500NMNPCnoBroadNets 1.3.6.1.4.1.449.2.1.1.2.1.19
Number of Broadcast Nets. This specifies the number of Broadcast Networks to which this node can send broadcast messages. A value of 0 will disable broadcast functions.
                             cdx6500NMNPCnoBroadInCh 1.3.6.1.4.1.449.2.1.1.2.1.20
Number of Broadcast Input Channels. This specifies the number of simultaneous broadcast messages that can be received.
                             cdx6500NMNPCbillMnem 1.3.6.1.4.1.449.2.1.1.2.1.21
When billing records need to be printed, the node will use this mnemonic to call and send the records to this destination. This location is usually a printer used to print billing records.
                             cdx6500NMNPCbillThresh 1.3.6.1.4.1.449.2.1.1.2.1.22
When the number of billing records queued up equals this threshold, a call will be placed to the logging device to dump the billing records.
                             cdx6500NMNPCmaxBill 1.3.6.1.4.1.449.2.1.1.2.1.23
This is the maximum number of billing records the node will be allowed to store to be printed. Billing records created after this maximum is reached will be lost.
                             cdx6500NMNPCbillTimer 1.3.6.1.4.1.449.2.1.1.2.1.24
If billing records have been stored for printing for this amount of time (in minutes) without reaching the threshold, a call will be made so that they can be printed.
                             cdx6500NMNPCpvcBill 1.3.6.1.4.1.449.2.1.1.2.1.25
At this interval the billing records will be gathered and printed for all of the PVCs in the node that have billing turned on.
                             cdx6500NMNPCmaxCalls 1.3.6.1.4.1.449.2.1.1.2.1.26
Limiting the number of calls allowed in the node will eliminate data loss in extreme traffic conditions.
                             cdx6500NMNPCpadBulletin 1.3.6.1.4.1.449.2.1.1.2.1.27
PAD Bulletin Message. Specifies the message that appears when a terminal connects to PAD port and enters Command Mode. To have no message appear, select blank.
                             cdx6500NMNPCpadBanner 1.3.6.1.4.1.449.2.1.1.2.1.28
PAD Banner Message. Specifies the message PAD ports send to attached terminals when they enter Command Mode. These special characters can be used to display certain information in the PAD Banner Message. A Node address C Channel Number G Group sub-address N Node Name P Port Number S Sub-address T Time V Software revision If the character following the % symbol is not one of the above, both the % and following character are discarded. The caret (^) is used as an escape character to tell the PAD to send control characters. The character following the caret is converted to a control character and is sent to the PAD port for output. The caret is discarded unless it is entered twice (^^).
                             cdx6500NMNPCdcpFac 1.3.6.1.4.1.449.2.1.1.2.1.29
This defines the facility used to carry DCP information at call setup and reconnection time in Call Request and Call Accept packets through the 6500 network. Change the value only if it interferes with some other private network facility.
                             cdx6500NMNPCtrafficPri 1.3.6.1.4.1.449.2.1.1.2.1.30
Traffic Priority. This is the default traffic priority to be used on the node. newvalLow : same functionality as low, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPCtrafficStep 1.3.6.1.4.1.449.2.1.1.2.1.31
Traffic Priority Step. This specifies the number of packets to be transmitted for each lower priority packet transmitted.
                             cdx6500NMNPCpropProtId 1.3.6.1.4.1.449.2.1.1.2.1.32
This is the Codex Proprietary Protocol ID. Its value is put in the first byte of the Protocol Identifier field of the CUD in the Call Request packets for protocols that have not been assigned a standardized value by the CCITT.
                             cdx6500NMNPClanSubAddr 1.3.6.1.4.1.449.2.1.1.2.1.33
Calls with network address composed of the node address and this subaddress will be routed to a LAN Connection in this node.
                             cdx6500NMNPCMaxFrameSize 1.3.6.1.4.1.449.2.1.1.2.1.34
The largest datalink level frame that will ever be received on any link. On WAN links this does not include space that is reserved internally for trailers.
                             cdx6500NMNPCCodexGroupFacility 1.3.6.1.4.1.449.2.1.1.2.1.35
This is the facility used in call packets on Codex 6500 links for passing CODEX PRIVATE facilities other than Hop Count and DCP facilities between 4.xx nodes. This should be the SAME on all nodes in the network. It need only be changed if it interferes with some other private network facility.
                             cdx6500NMNPCalmDistrib 1.3.6.1.4.1.449.2.1.1.2.1.36
Distribution of alarms is controlled by specifying: NONE - no alarm is sent \ CTP - send alarms to Control Port Terminal \ PRIN - send alarms to Printer Destination \ Any combination of above specified by summing (e.g. CTP+PRIN).
                             cdx6500NMNPCalmSelection 1.3.6.1.4.1.449.2.1.1.2.1.37
Alarm type reporting by the node: NONE - no alarms reported. HIGH - high severity alarms reported. MED - medium severity alarms reported. LOW - low severity alarms reported. CONN - connection events reported. CODE - alarms from Codex 6000 communication processors reported. Any combination of above specified by summing (e.g. HIGH+CONN+. . .).
                             cdx6500NMNPChopFacility 1.3.6.1.4.1.449.2.1.1.2.1.38
Hop Count Facility. This is the facility used in call packets on X.25 links with the INL option for network routing. This should be the SAME in all nodes in the network. It need only be changed if it interferes with some other private network facility.
                             cdx6500NMNPCnumNccpDevices 1.3.6.1.4.1.449.2.1.1.2.1.39
This is the number of NCCP devices.
                             cdx6500NMNPCmaxCallid 1.3.6.1.4.1.449.2.1.1.2.1.40
This is the maximum number of Call id numbers that go in the Calling Identifier table. This table can have a maximum of 512 entries. Each entry of 30 digits.
                         cdx6500NMNPinvent 1.3.6.1.4.1.449.2.1.1.2.2
                             cdx6500NMNPIproductType 1.3.6.1.4.1.449.2.1.1.2.2.1
Identifies a general class of feature set for the product, e.g. 6504PLUS Asynchronous PAD or 6520 Branch Node
                             cdx6500NMNPIsoftwareSrc 1.3.6.1.4.1.449.2.1.1.2.2.2
The source of software currently running on the node. prom - CPU running from code in PROM. download - CPU downloading code into RAM. promLoadingRAM - CPU running from code in RAM. newvalProm - same functionality as prom, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPIserialNum 1.3.6.1.4.1.449.2.1.1.2.2.3
The serial number of the motherboard.
                             cdx6500NMNPIpromRevision 1.3.6.1.4.1.449.2.1.1.2.2.4
The PROM software revision.
                             cdx6500NMNPIdlCodeRevision 1.3.6.1.4.1.449.2.1.1.2.2.5
The downloaded software revision. Applicable to 6500 platforms.
                             cdx6500NMNPIdlCodeSource 1.3.6.1.4.1.449.2.1.1.2.2.6
The source of downloaded software. Applicable to 6500 platforms.
                             cdx6500NMNPIdlCodeSize 1.3.6.1.4.1.449.2.1.1.2.2.7
The size of downloaded software in bytes. Applicable to 6500 platforms.
                             cdx6500NMNPIflashStatus 1.3.6.1.4.1.449.2.1.1.2.2.8
The status of use of flash memory. Applicable only to 6500 platforms. newvalEnabled : same functionality as enabled, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPIflashIdCur 1.3.6.1.4.1.449.2.1.1.2.2.9
Name and version of software stored in flash. This refers to the currently selected bank of flash when there is an alternate bank of flash installed.
                             cdx6500NMNPIflashIdAlt 1.3.6.1.4.1.449.2.1.1.2.2.10
Name and version of software contained by the alternate bank of flash (if installed). Applicable to 6520 platforms.
                             cdx6500NMNPIflashSizeCur 1.3.6.1.4.1.449.2.1.1.2.2.11
Size of software stored in flash. This refers to the currently selected bank of flash when there is an alternate bank of flash installed.
                             cdx6500NMNPIflashSizeAlt 1.3.6.1.4.1.449.2.1.1.2.2.12
Size of software in the alternate bank of flash (bytes). Applicable to 6520 platforms.
                             cdx6500NMNPIinventTable 1.3.6.1.4.1.449.2.1.1.2.2.13
A list of the nodes boards.
                                   cdx6500NMNPIinventEntry 1.3.6.1.4.1.449.2.1.1.2.2.13.1
Each entry contains a board number, board type, number of ports, status, and serial number.
                                       cdx6500NMNPIinventBoard 1.3.6.1.4.1.449.2.1.1.2.2.13.1.1
The board number. This is used to index the boards in a node.
                                       cdx6500NMNPIinventType 1.3.6.1.4.1.449.2.1.1.2.2.13.1.2
The board type. A description of the type of board.
                                       cdx6500NMNPIinventPorts 1.3.6.1.4.1.449.2.1.1.2.2.13.1.3
The number of I/O ports for this board.
                                       cdx6500NMNPIinventStatus 1.3.6.1.4.1.449.2.1.1.2.2.13.1.4
The status of the board
                                       cdx6500NMNPIinventSerial 1.3.6.1.4.1.449.2.1.1.2.2.13.1.5
The serial number of the board
                                       cdx6500NMNPIinventAssy 1.3.6.1.4.1.449.2.1.1.2.2.13.1.6
The assembly number of the board
                                       cdx6500NMNPIinventRev 1.3.6.1.4.1.449.2.1.1.2.2.13.1.7
The revision level of the board
                                       cdx6500NMNPIinventDIM1 1.3.6.1.4.1.449.2.1.1.2.2.13.1.8
The type of interface specified by DIM 1.
                                       cdx6500NMNPIinventDIM2 1.3.6.1.4.1.449.2.1.1.2.2.13.1.9
The type of interface specified by DIM 2.
                             cdx6500NMNPIinventPortConfigTable 1.3.6.1.4.1.449.2.1.1.2.2.14
A list of the nodes Port Configuration.
                                   cdx6500NMNPIinventPortConfigEntry 1.3.6.1.4.1.449.2.1.1.2.2.14.1
Each entry contains a port configuration.
                                       cdx6500NMNPIinventPortNum 1.3.6.1.4.1.449.2.1.1.2.2.14.1.1
The port number. This is used to index the ports in a node.
                                       cdx6500NMNPIinventPortConfig 1.3.6.1.4.1.449.2.1.1.2.2.14.1.2
The port configuration on each board.
                         cdx6500NMNPstats 1.3.6.1.4.1.449.2.1.1.2.3
                             cdx6500NMNPSevLastOccPower 1.3.6.1.4.1.449.2.1.1.2.3.1
The last time the node was turned on.
                             cdx6500NMNPSevLastOccReset 1.3.6.1.4.1.449.2.1.1.2.3.2
The last time the reset button was pressed.
                             cdx6500NMNPSevLastOccReboot 1.3.6.1.4.1.449.2.1.1.2.3.3
The last time the node was rebooted.
                             cdx6500NMNPSevLastOccWDTimer 1.3.6.1.4.1.449.2.1.1.2.3.4
The last time the watch dog timer expired.
                             cdx6500NMNPSevLastOccConfig 1.3.6.1.4.1.449.2.1.1.2.3.5
The last time the configuration memory was changed or downloaded.
                             cdx6500NMNPSstatusFan 1.3.6.1.4.1.449.2.1.1.2.3.6
The operational status of the cooling fan. newvalNotMonitored : same functionality as notMonitored, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPSstatusPwrSy 1.3.6.1.4.1.449.2.1.1.2.3.7
The operational status of the power supply. This object is being replaced by cdx6500NMNPSstatusPowerSy. newvalNotMonitored : same functionality as notMonitored, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPScmemSizeComp 1.3.6.1.4.1.449.2.1.1.2.3.8
Size of compressed configuration memory available (free) in bytes.
                             cdx6500NMNPScmemUseComp 1.3.6.1.4.1.449.2.1.1.2.3.9
Size of compressed configuration memory in use in bytes.
                             cdx6500NMNPScmemSizeUncomp 1.3.6.1.4.1.449.2.1.1.2.3.10
Size of uncompressed configuration memory available (free) in bytes.
                             cdx6500NMNPScmemUseUnComp 1.3.6.1.4.1.449.2.1.1.2.3.11
Size of uncompressed configuration memory in use in bytes.
                             cdx6500NMNPScallsInPlaceCur 1.3.6.1.4.1.449.2.1.1.2.3.12
Number of X.25 calls. The number of calls currently in place.
                             cdx6500NMNPScallsInPlaceMax 1.3.6.1.4.1.449.2.1.1.2.3.13
Number of X.25 calls gauge. The maximum number of calls since the last reset.
                             cdx6500NMNPScallsPerSecCur 1.3.6.1.4.1.449.2.1.1.2.3.14
Rate of X.25 calls. The number of calls/sec. currently in place.
                             cdx6500NMNPScallsPerSecMax 1.3.6.1.4.1.449.2.1.1.2.3.15
Rate of X.25 calls gauge. The maximum number of calls/sec. since the last reset.
                             cdx6500NMNPSpvcConnectCur 1.3.6.1.4.1.449.2.1.1.2.3.16
Permanent virtual circuit connections. The number currently in place.
                             cdx6500NMNPSPVCConnectMax 1.3.6.1.4.1.449.2.1.1.2.3.17
Permanent virtual circuit connections. The maximum since the last reset.
                             cdx6500NMNPSbuffDataAvail 1.3.6.1.4.1.449.2.1.1.2.3.18
The number of data buffers available. Applicable to all platforms.
                             cdx6500NMNPSbuffDataUse 1.3.6.1.4.1.449.2.1.1.2.3.19
The number of data buffers in use. Applicable to all platforms.
                             cdx6500NMNPSbuffDataGauge 1.3.6.1.4.1.449.2.1.1.2.3.20
The maximum number of data buffers in use since last reset Applicable to all platforms.
                             cdx6500NMNPSbuffPacketAvail 1.3.6.1.4.1.449.2.1.1.2.3.21
The number of packet buffers available. Applicable to all platforms except VG100 .
                             cdx6500NMNPSbuffPacketUse 1.3.6.1.4.1.449.2.1.1.2.3.22
The number of packet buffers in use. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffPacketExhaust 1.3.6.1.4.1.449.2.1.1.2.3.23
The number of times the packet buffer pool has been exhausted since last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffMgtAvail 1.3.6.1.4.1.449.2.1.1.2.3.24
The number of management buffers available. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffMgtUse 1.3.6.1.4.1.449.2.1.1.2.3.25
The number of management buffers in use. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffMgtExhaust 1.3.6.1.4.1.449.2.1.1.2.3.26
The number of times the management buffer pool has been exhausted since last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSrateCurChar 1.3.6.1.4.1.449.2.1.1.2.3.27
Node throughput, number of current chararacters/second for the node.
                             cdx6500NMNPSrateCurPkt 1.3.6.1.4.1.449.2.1.1.2.3.28
Node throughput, number of current packets/second for the node.
                             cdx6500NMNPSrateMaxChar 1.3.6.1.4.1.449.2.1.1.2.3.29
Node throughput gauge, Number of maximum characters/second for the node since last reset
                             cdx6500NMNPSrateMaxPkt 1.3.6.1.4.1.449.2.1.1.2.3.30
Node throughput gauge, Number of maximum packets/second for the node since last reset
                             cdx6500NMNPSmemEprom 1.3.6.1.4.1.449.2.1.1.2.3.31
Amount of memory available on the processor card in bytes. Applicable to 6520 platforms.
                             cdx6500NMNPSmemDram 1.3.6.1.4.1.449.2.1.1.2.3.32
Amount of memory used for data buffers in bytes. Applicable to 6520 platforms.
                             cdx6500NMNPSmemFlashCur 1.3.6.1.4.1.449.2.1.1.2.3.33
The size of the flash module in bytes. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. Applicable to 6520 platforms.
                             cdx6500NMNPSmemFlashAlt 1.3.6.1.4.1.449.2.1.1.2.3.34
The size of the alternate flash module in bytes. Applicable to 6520 platforms.
                             cdx6500NMNPScpuUtil 1.3.6.1.4.1.449.2.1.1.2.3.35
Percentage of time the CPU processed traffic data (as opposed performing diagnositic tests or processing node control data) to in the last 64 seconds. Applicable to 6520 platforms.
                             cdx6500NMNPSDisplayNumImage 1.3.6.1.4.1.449.2.1.1.2.3.36
Front panel numeric display. Applicable to 6520 platforms.
                             cdx6500NMNPSDisplayLEDstatus 1.3.6.1.4.1.449.2.1.1.2.3.37
Front panel status LED. Applicable to 6520 platforms. newvalOff : same functionality as off, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPSDisplayLEDdiag 1.3.6.1.4.1.449.2.1.1.2.3.38
Front panel fault (or service) LED. Applicable to 6520 platforms. newvalOff : same functionality as off, new enumeration added for RFC1155 compatibility.
                             cdx6500NMNPSdefaultNode 1.3.6.1.4.1.449.2.1.1.2.3.39
A control object. Setting to value default will cause the current configuration of the entire node to change back to the default settings. CAUTION: If you implement the Default Node control, communications are disrupted and data could be lost after a boot. In addition, configuration settings are lost unless they had been saved to an external device.
                             cdx6500NMNPSresetStatTable 1.3.6.1.4.1.449.2.1.1.2.3.40
A list of Port Statistic Reset entries.
                                   cdx6500NMNPSresetStatEntry 1.3.6.1.4.1.449.2.1.1.2.3.40.1
Each entry contains a port number and a control to reset statistics for that port.
                                       cdx6500NMNPSresetStatPort 1.3.6.1.4.1.449.2.1.1.2.3.40.1.1
The port number value for this object directs the statistics reset command to that port.
                                       cdx6500NMNPSresetStatStatus 1.3.6.1.4.1.449.2.1.1.2.3.40.1.2
A value of reset will cause a ports statistics to be reset. A value of noReset has no effect.
                             cdx6500NMNPSresetStatAll 1.3.6.1.4.1.449.2.1.1.2.3.41
A value of reset will cause statistics to be reset on all ports. A value of noReset has no effect.
                             cdx6500NMNPSstatusPowerSy 1.3.6.1.4.1.449.2.1.1.2.3.42
The operational status of the power supply. This object replaces cdx6500NMNPSstatusPwrSy.
                             cdx6500NMNPSstatsTable 1.3.6.1.4.1.449.2.1.1.2.3.43
Board specific statistics. Applicable to 6500 platforms.
                                   cdx6500NMNPSstatsEntry 1.3.6.1.4.1.449.2.1.1.2.3.43.1
A Board statistics Table entry. Each entry contains statistics parameters for a single board. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsBoard 1.3.6.1.4.1.449.2.1.1.2.3.43.1.1
Board number. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsbuffDataAvail 1.3.6.1.4.1.449.2.1.1.2.3.43.1.2
The number of data buffers available. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsbuffDataUse 1.3.6.1.4.1.449.2.1.1.2.3.43.1.3
The number of data buffers in use. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsbuffDataGauge 1.3.6.1.4.1.449.2.1.1.2.3.43.1.4
The maximum number of data buffers in use since last reset Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsmemEprom 1.3.6.1.4.1.449.2.1.1.2.3.43.1.5
Amount of memory available on the processor card in bytes. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsmemDram 1.3.6.1.4.1.449.2.1.1.2.3.43.1.6
Amount of memory used for data buffers in bytes. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsmemFlash 1.3.6.1.4.1.449.2.1.1.2.3.43.1.7
The size of the flash module in bytes. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatscpuUtil 1.3.6.1.4.1.449.2.1.1.2.3.43.1.8
Percentage of time the CPU processed traffic data (as opposed performing diagnositic tests or processing node control data) to in the last 64 seconds. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsMaxcpuUtil 1.3.6.1.4.1.449.2.1.1.2.3.43.1.9
Peak CPU Utilization since last node or statistics reset. Applicable to 6500 platforms.
                                       cdx6500NMNPSstatsMaxcpuUtilTime 1.3.6.1.4.1.449.2.1.1.2.3.43.1.10
Time stamp of Peak CPU Utilization since last node or statistics reset. Applicable to 6500 platforms.
                             cdx6500NMNPScallsInPlaceMaxTime 1.3.6.1.4.1.449.2.1.1.2.3.44
Time stamp of Max number of calls since the last reset.
                             cdx6500NMNPSPVCConnectMaxTime 1.3.6.1.4.1.449.2.1.1.2.3.45
Time stamp of Max number of PVC connections since the last reset.
                             cdx6500NMNPScallsPerSecMaxTime 1.3.6.1.4.1.449.2.1.1.2.3.46
Time stamp of Max number of calls/sec since the last reset.
                             cdx6500NMNPSbuffDataGaugeTime 1.3.6.1.4.1.449.2.1.1.2.3.47
Time stamp of Max number of data buffers in use since the last reset. Applicable to all platforms.
                             cdx6500NMNPSbuffPacketGauge 1.3.6.1.4.1.449.2.1.1.2.3.48
The maximum number of packet buffers in use since the last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffPacketGaugeTime 1.3.6.1.4.1.449.2.1.1.2.3.49
Time stamp of Max number of packet buffers in use since the last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffMgtGauge 1.3.6.1.4.1.449.2.1.1.2.3.50
The maximum number of management buffers in use since the last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSbuffMgtGaugeTime 1.3.6.1.4.1.449.2.1.1.2.3.51
Time stamp of Max number of management buffers in use since the last reset. Applicable to all platforms except VG100.
                             cdx6500NMNPSrateMaxCharTime 1.3.6.1.4.1.449.2.1.1.2.3.52
Time stamp of Max node throughput (chars/sec) since the last reset.
                             cdx6500NMNPSrateMaxPktTime 1.3.6.1.4.1.449.2.1.1.2.3.53
Time stamp of Max node throughput (packets/sec) since the last reset.
                             cdx6500NMNPSMaxcpuUtil 1.3.6.1.4.1.449.2.1.1.2.3.54
Peak CPU Utilization since last node or statistics reset. Applicable to 6520 platforms.
                             cdx6500NMNPSMaxcpuUtilTime 1.3.6.1.4.1.449.2.1.1.2.3.55
Time stamp of Peak CPU Utilization since last node or statistics reset. Applicable to 6520 platforms.
                     cdx6500NMDiagnosticsGroup 1.3.6.1.4.1.449.2.1.1.3
                         cdx6500NMReportTable 1.3.6.1.4.1.449.2.1.1.3.1
All of the statistics parameters relevant to the Report event log table.
                             cdx6500NMReportEntry 1.3.6.1.4.1.449.2.1.1.3.1.1
A row of Report Statistics parameters.
                                 cdx6500reptIndex 1.3.6.1.4.1.449.2.1.1.3.1.1.1
Report Log Index
                                 cdx6500reptEvent 1.3.6.1.4.1.449.2.1.1.3.1.1.2
Report Log Alarm Text
                         cdx6500NMreptClearLog 1.3.6.1.4.1.449.2.1.1.3.2
Clears the Operator log. clearLog - Clear the Log noClearLog - Do not clear the Log.
                         cdx6500NMV54Loopback 1.3.6.1.4.1.449.2.1.1.3.3
                             cdx6500NMV54LocalLoop 1.3.6.1.4.1.449.2.1.1.3.3.1
Local loop test; The test will start when set to value startTest.
                             cdx6500NMV54Loop2 1.3.6.1.4.1.449.2.1.1.3.3.2
Loopback test 2 : Loop at remote modem digital side.
                             cdx6500NMV54Loop3 1.3.6.1.4.1.449.2.1.1.3.3.3
Loopback test 3: Loop at local modem analog side.
                             cdx6500NMV54turnLoopbackOff 1.3.6.1.4.1.449.2.1.1.3.3.4
A control to turn any loopback test off
                             cdx6500NMV54LoopbackDuration 1.3.6.1.4.1.449.2.1.1.3.3.5
Duration of loopback in seconds.
                             cdx6500NMV54TestType 1.3.6.1.4.1.449.2.1.1.3.3.6
Loopback test type.
                             cdx6500NMV54LoopbackStatus 1.3.6.1.4.1.449.2.1.1.3.3.7
Loopback Status. v54Starting - test is being prepared to start. v54Running - test in progress. v54Stopping - test is being stopped. v54Clearing - system is clearing resources used for the test. v54Stopped - test has been completed. v54AbortPortDisabled - selected port is disabled. v54AbortIsRunning - test is already running on the specified port. v54AbortPortNull - selected port is of NULL type. v54AbortEiaDisc - interface has been disconnected during the test. v54AbortCpuNotRunning - CPU is not running on the specified port. v54AbortNotSupported - specified test is not supported by the selected port. v54AbortWrongParams - specified test params are incorrect. Check port number. v54AbortWrongPort - specified port is incorrect. v54NotRun - test has not been run yet.
                             cdx6500NMV54MessagesSent 1.3.6.1.4.1.449.2.1.1.3.3.9
Number of messages sent
                             cdx6500NMV54GoodMsgsReceived 1.3.6.1.4.1.449.2.1.1.3.3.10
Number of good messages received
                             cdx6500NMV54BadMsgsReceived 1.3.6.1.4.1.449.2.1.1.3.3.11
Number of bad messages received
                             cdx6500NMV54LastPortTested 1.3.6.1.4.1.449.2.1.1.3.3.12
Last port to be put in loopback.
                             cdx6500NMV54CurrentTestPort 1.3.6.1.4.1.449.2.1.1.3.3.13
Current test port.
                             cdx6500NMV54LoopbackTest 1.3.6.1.4.1.449.2.1.1.3.3.14
Starts and stops loopback test.
                             cdx6500NMV54LoopbackTestType 1.3.6.1.4.1.449.2.1.1.3.3.15
Loopback test type. v54LocalLoop - creates a loop on the selected port. v54Loop2 - creates a loop on the remote modem digital side. v54Loop3 - creates a loop on the local modem analog side. dsuInternal - creates a loop on the internal interface. dsuInternalExternal - creates a loop on the internal and the external interfaces.
                             cdx6500NMV54LoopbackLastPortTested 1.3.6.1.4.1.449.2.1.1.3.3.16
Last port put in loopback.
                             cdx6500NMV54LoopbackCurrentTestPort 1.3.6.1.4.1.449.2.1.1.3.3.17
Current test port. Value zero means that no port has been specified. When test completes, this object is defaulted to zero.
                             cdx6500NMV54LoopbackMessagesSent 1.3.6.1.4.1.449.2.1.1.3.3.18
Number of messages sent
                             cdx6500NMV54LoopbackGoodMsgsReceived 1.3.6.1.4.1.449.2.1.1.3.3.19
Number of good messages received
                             cdx6500NMV54LoopbackBadMsgsReceived 1.3.6.1.4.1.449.2.1.1.3.3.20
Number of bad messages received
                     cdx6500NMControlsGroup 1.3.6.1.4.1.449.2.1.1.4
                         cdx6500NMCBootNode 1.3.6.1.4.1.449.2.1.1.4.1
Setting this object will cuase the node to perform either a cold or a warm Node boot : bootCold - perform a cold Node Boot; run diagnostic tests, reload operational software, request software download if neccessary, reload configuration and start the node. bootWarm - perform a warm Node Boot; reload configuration and start the node. newvalBootCold - same functionality as bootCold, new enumeration added for RFC1155 compatibility.
                         cdx6500NMCBootTableNodeRec 1.3.6.1.4.1.449.2.1.1.4.2
Setting to bootrec will cause the running configuration to be updated using new configuration tables from CMEM.
                     cdx6500NMDLSVGroup 1.3.6.1.4.1.449.2.1.1.5
                         cdx6500DLSVDLstate 1.3.6.1.4.1.449.2.1.1.5.1
Statistic - state of the download dlStart : Setup phase. dlCall : Setup phase. dlReq : Setup phase. dlLoad : Downloading phase. dlGss : Setup phase. dlLgs : Downloading phase. dlDone : Download Complete. dlBoot : Download Complete. dlIdle : No download.
                         cdx6500DLSVPercentComplete 1.3.6.1.4.1.449.2.1.1.5.2
Statistic - amount of download that has completed.
                         cdx6500DLSVTimestamp 1.3.6.1.4.1.449.2.1.1.5.3
Statistic - time of last download.
                         cdx6500DLSVLastServer 1.3.6.1.4.1.449.2.1.1.5.4
Statistic - Last server node to send software.
                         cdx6500DLSVTransferType 1.3.6.1.4.1.449.2.1.1.5.5
Statistic - type of transfer - i.e. which bank to which bank at what throughput.
                         cdx6500DLSVInitiateTransfer 1.3.6.1.4.1.449.2.1.1.5.6
Type of transfer - i.e. which bank to which bank at what throughput setting this initiates the flash to flash transfer.
                         cdx6500DLSVAgntSegmentSize 1.3.6.1.4.1.449.2.1.1.5.7
This is the segment size used for accounting purposes with data packets. segmentSizeDisable - segment counting disabled. segmentSize16 - 16 byte segments. segmentSize32 - 32 byte segments. segmentSize64 - 64 byte segments. segmentSize128 - 128 byte segments. segmentSize256 - 256 byte segments. segmentSize512 - 512 byte segments. segmentSize1024 - 1024 byte segments newvalSegmentSizeDisable - same as segmentSizeDisable, new enumeration added for RFC1155 compatibility.
                         cdx6500DLSVAgntnmServAddress 1.3.6.1.4.1.449.2.1.1.5.8
This is the mnemonic name of the download server assigned to load this node with operational software.
                         cdx6500DLSVagntloaderSubaddress 1.3.6.1.4.1.449.2.1.1.5.9
This is the subaddress of the download module in this node.
                         cdx6500DLSVagntdlServSubaddress 1.3.6.1.4.1.449.2.1.1.5.10
Calls with network address composed of the node address (configured in the Node record) and this subaddress will be routed to the module in this node which sends code to a remote node. No routing table entry is needed.
                 cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
                     cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
                         cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
                         cdx6500CreatePortAndStationTable 1.3.6.1.4.1.449.2.1.2.1.9
Create Port and Station table.
                             cdx6500CreatePortAndStationEntry 1.3.6.1.4.1.449.2.1.2.1.9.1
Entry for representing Creating Port and Station Record.
                                 cdx6500PortNumber 1.3.6.1.4.1.449.2.1.2.1.9.1.1
Port Number which is installed.
                                 cdx6500CreatePortType 1.3.6.1.4.1.449.2.1.2.1.9.1.2
port type to be created. pad : PAD port x25 : X25 port mx25 : Multipoint X25 port sdlc : Synchronous Data Link Control Port xdlc : X25 Data Link Control Port fri : Frame Relay Interface Port tr : Token Ring Port eth : Ethernet Port fra : Frame Relay Access Port.
                                 cdx6500CreateStation 1.3.6.1.4.1.449.2.1.2.1.9.1.3
station number to be created. The instance should be existing port number. Station Range : 1 - Max Station Number.
                     cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
                         cdx6500GCTRouteSelectionTable 1.3.6.1.4.1.449.2.1.2.2.1
A list of Configuration Parameters that select the links over which calls are routed.
                             cdx6500GCTRouteSelectionEntry 1.3.6.1.4.1.449.2.1.2.2.1.1
Each entry contains a list of parameters that makeup the Route Selection Table.
                                 cdx6500RoutSVCEntryNumber 1.3.6.1.4.1.449.2.1.2.2.1.1.1
This is not a configurable parameter. This identifies the particular Route Selection Table entry being configured by the other parameters in the record.
                                 cdx6500RoutSVCAddress 1.3.6.1.4.1.449.2.1.2.2.1.1.2
This is a non-supported object. It has been replaced by cdx6500RoutSVCAddress1.
                                 cdx6500RoutSVCDestination1 1.3.6.1.4.1.449.2.1.2.2.1.1.3
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority1 1.3.6.1.4.1.449.2.1.2.2.1.1.4
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination2 1.3.6.1.4.1.449.2.1.2.2.1.1.5
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority2 1.3.6.1.4.1.449.2.1.2.2.1.1.6
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination3 1.3.6.1.4.1.449.2.1.2.2.1.1.7
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority3 1.3.6.1.4.1.449.2.1.2.2.1.1.8
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination4 1.3.6.1.4.1.449.2.1.2.2.1.1.9
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority4 1.3.6.1.4.1.449.2.1.2.2.1.1.10
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination5 1.3.6.1.4.1.449.2.1.2.2.1.1.11
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority5 1.3.6.1.4.1.449.2.1.2.2.1.1.12
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination6 1.3.6.1.4.1.449.2.1.2.2.1.1.13
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority6 1.3.6.1.4.1.449.2.1.2.2.1.1.14
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination7 1.3.6.1.4.1.449.2.1.2.2.1.1.15
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority7 1.3.6.1.4.1.449.2.1.2.2.1.1.16
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCDestination8 1.3.6.1.4.1.449.2.1.2.2.1.1.17
This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
                                 cdx6500RoutSVCPriority8 1.3.6.1.4.1.449.2.1.2.2.1.1.18
This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest.
                                 cdx6500RoutSVCAddress1 1.3.6.1.4.1.449.2.1.2.2.1.1.19
Network address for calls routed beyond this node. A route selection entry is not needed for calls destined within this node: PAD port or node resource (for example, control port) calls. The wild card(match anything) character is * and can also be part of the entry. When set to (blank), this parameter is ignored.
                         cdx6500GCTPVCSetupTable 1.3.6.1.4.1.449.2.1.2.2.5
A list of Configuration Parameters for PVCs.
                             cdx6500GCTPVCSetupEntry 1.3.6.1.4.1.449.2.1.2.2.5.1
Each entry contains a PVC source and PVC destination.
                                 cdx6500PVCSetupEntryNumber 1.3.6.1.4.1.449.2.1.2.2.5.1.1
This is not a configurable parameter. This identifies the particular PVC Table entry being configured by the other parameters in the record.
                                 cdx6500PVCSetupSource 1.3.6.1.4.1.449.2.1.2.2.5.1.2
This is the PVC source channel identifier. Entries are not case sensitive. For example: BCST route calls to the broadcast module. MX25-2s3(2) route calls to MX25 port 2, station 3, channel 2. PAD-5 route calls to PAD port 5. P54S9(22) route calls to port 54, station 9, channel 22. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1(5) route calls to X25 port 1, channel 5.
                                 cdx6500PVCSetupDestination 1.3.6.1.4.1.449.2.1.2.2.5.1.3
This is the PVC destination channel identifier. Entries are not case sensitive. For example: BCST route calls to the broadcast module. MX25-2s3(2) route calls to MX25 port 2, station 3, channel 2. PAD-5 route calls to PAD port 5. P54S9(22) route calls to port 54, station 9, channel 22. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1(5) route calls to X25 port 1, channel 5.
                         cdx6500CfgMnemonicTable 1.3.6.1.4.1.449.2.1.2.2.6
All of the configuration parameters relevant to the Mnemonic table.
                             cdx6500CfgMnemonicEntry 1.3.6.1.4.1.449.2.1.2.2.6.1
A row of mnemonic configuration parameters.
                                 cdx6500mnemEntryNum 1.3.6.1.4.1.449.2.1.2.2.6.1.1
This is not a configuration parameter. Instead, it identifies the particular Mnemonic Table entry being configured by the other parameters in the record. NOTE: You can have up to 256 entries for the 6507Plus and 6525Plus, but only 64 entries for the 6505Plus.
                                 cdx6500mnemName 1.3.6.1.4.1.449.2.1.2.2.6.1.2
This is an mnemonic name available to PAD port users for abbreviated calling or autocalling. The following parameter will specify call details. The mnemonic CTP is reserved and specifies a call to the control port.
                                 cdx6500mnemx28Cmd 1.3.6.1.4.1.449.2.1.2.2.6.1.3
This specifies call details for the mnemonic configured in the previous parameter. Use the format of an X.28 call command, but leave out the command specifier (the c or call).
                         cdx6500GCTNUIPasswordTable 1.3.6.1.4.1.449.2.1.2.2.7
A list of NUI/Password configuration entries.
                             cdx6500GCTNUIPasswordEntry 1.3.6.1.4.1.449.2.1.2.2.7.1
The Network User Identification (NUI)/Password Table.
                                 cdx6500NUITEntryNumber 1.3.6.1.4.1.449.2.1.2.2.7.1.1
This is not a configurable parameter. Instead, it identifies the particular NUI/Password Table entry being configured by the other parameters in the record.
                                 cdx6500NUITAcctName 1.3.6.1.4.1.449.2.1.2.2.7.1.2
This is the account name for billing records.
                                 cdx6500NUITPasswd 1.3.6.1.4.1.449.2.1.2.2.7.1.3
This is the password for the account name.
                                 cdx6500NUITPADPromptNum 1.3.6.1.4.1.449.2.1.2.2.7.1.4
This parameter specifies which entry in the PAD Prompt Table is used as a PAD prompt after the user has entered a valid password. Use 0 for standard asterisk prompt.
                         cdx6500GCTSoftwareKeyTable 1.3.6.1.4.1.449.2.1.2.2.12
A table of Software Key configuration entries.
                               cdx6500GCTSoftwareKeyEntry 1.3.6.1.4.1.449.2.1.2.2.12.1
The Software Key for a specific optional software product code.
                                   cdx6500CSISSoftKeyEntryNumber 1.3.6.1.4.1.449.2.1.2.2.12.1.1
This is not a configurable parameter. It is the reference number for the individual software option that is being enabled. You must configure a separate entry for each software option enabled at the node. A node may have up to 20 options enabled at one time.
                                   cdx6500CSISSoftKeyValue 1.3.6.1.4.1.449.2.1.2.2.12.1.2
This is a software key supplied by Codex Corporation for this node.
                 cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
                     cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
                         cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
                             cdx6500PPSTallPortsTable 1.3.6.1.4.1.449.2.1.3.1.1.18
All of the statistics parameters relevant to the allPorts table.
                                   cdx6500PPSTallPortsEntry 1.3.6.1.4.1.449.2.1.3.1.1.18.1
A row of allPorts statistics parameters.
                                       cdx6500allportsPortNum 1.3.6.1.4.1.449.2.1.3.1.1.18.1.1
Number of the port
                                       cdx6500allportsPortType 1.3.6.1.4.1.449.2.1.3.1.1.18.1.2
Type of port.
                                       cdx6500allportsPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.18.1.3
Status of the port. disabled - Port is disabled. enabled - Port is enabled. busyOut - Port is busyOuted. up - Port is up. down - Port is down. newvalDisabled - same functionality as disabled, new enumeration added for RFC1155 compatibility.
                                       cdx6500allportsPortState 1.3.6.1.4.1.449.2.1.3.1.1.18.1.4
Current Port state.
                                       cdx6500allportsPortSpeed 1.3.6.1.4.1.449.2.1.3.1.1.18.1.5
This is the speed of the port when Clock=Int; this is detected clock speed if Clock=Ext. If Port Speed is 0, Clock=Ext then clocking is not being received from attached device.
                                       cdx6500allportsUtilizationIn 1.3.6.1.4.1.449.2.1.3.1.1.18.1.6
Percentage of port bandwidth in use.
                                       cdx6500allportsUtilizationOut 1.3.6.1.4.1.449.2.1.3.1.1.18.1.7
Percentage of port bandwidth in use.
                                       cdx6500allportsCharInTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.8
Number of characters received by the port since the last node, port or statistics reset.
                                       cdx6500allportsCharOutTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.9
Number of characters sent by the port since the last node, port or statistics reset.
                                       cdx6500allportsPktInTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.10
Number of packets received by the port since the last node, port or statistics reset.
                                       cdx6500allportsPktOutTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.11
Number of packets sent by the port since the last node, port or statistics reset.
                                       cdx6500allportsFrameInTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.12
Number of frames received by the port since the last node, port or statistics reset.
                                       cdx6500allportsFrameOutTot 1.3.6.1.4.1.449.2.1.3.1.1.18.1.13
Number of frames sent by the port since the last node, port or statistics reset.
                                       cdx6500allportsPktsQueued 1.3.6.1.4.1.449.2.1.3.1.1.18.1.14
Number of packets currently queued.
                                       cdx6500allportsCharsInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.15
Summary of the characters being received over the port.
                                       cdx6500allportsCharsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.16
Summary of the characters being sent over the port.
                                       cdx6500allportsPktsInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.17
Summary of the packets being received over the port.
                                       cdx6500allportsPktsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.18
Summary of the packets being sent over the port.
                                       cdx6500allportsFramesInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.19
Summary of the frames being received over the port.
                                       cdx6500allportsFramesOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.18.1.20
Summary of the frames being sent over the port.
                                       cdx6500allportsOverrunErrors 1.3.6.1.4.1.449.2.1.3.1.1.18.1.21
Number of Overrun errors since the last node or statistics reset. Overrun Errors: Received data was lost because it could not be processed by the CPU.
                                       cdx6500allportsUnderrunErrors 1.3.6.1.4.1.449.2.1.3.1.1.18.1.22
Number of Underrun errors since the last node or statistics reset. UnderrunErrors: Transmission of a frame could not be completed because all the data had not been sent to port.
                                       cdx6500allportsCRCErrors 1.3.6.1.4.1.449.2.1.3.1.1.18.1.23
Number of CRC errors since the last node or statistics reset. CRC Errors: Cyclical Redundancy failure because of noise on the line.
                                       cdx6500allportsParityErrors 1.3.6.1.4.1.449.2.1.3.1.1.18.1.24
Number of Parity errors since the last reset
                                       cdx6500allportsFramingErrors 1.3.6.1.4.1.449.2.1.3.1.1.18.1.25
Number of Framing errors since the last reset.
                                       cdx6500allportsBootPort 1.3.6.1.4.1.449.2.1.3.1.1.18.1.26
Boots the specified Port. bootPort - Boot the Port.
                                       cdx6500allportsPortControlStatus 1.3.6.1.4.1.449.2.1.3.1.1.18.1.27
Change the Port Control Status. enable - Enable the Port. disable - Disable the Port. busyout - BusyOut the Port.
                         cdx6500PSTStationProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.3
                             cdx6500SPSTallStationsTable 1.3.6.1.4.1.449.2.1.3.1.3.8
All of the statistics parameters relevant to the allStations table.
                                 cdx6500SPSTallStationsEntry 1.3.6.1.4.1.449.2.1.3.1.3.8.1
A row of allStations statistics parameters.
                                     cdx6500allstationsPortNum 1.3.6.1.4.1.449.2.1.3.1.3.8.1.1
Number of the port.
                                     cdx6500allstationsStnNum 1.3.6.1.4.1.449.2.1.3.1.3.8.1.2
Number of the station.
                                     cdx6500allstationsStnType 1.3.6.1.4.1.449.2.1.3.1.3.8.1.3
Type of station.
                                     cdx6500allstationsStnStatus 1.3.6.1.4.1.449.2.1.3.1.3.8.1.4
Status of the station. disabled - Station is disabled. enabled - Station is enabled. busyOut - Station is busyOuted. up - Station is up. down - Station is down. newvalDisabled - same functionality as disabled, new enumeration added for RFC1155 compatibility.
                                     cdx6500allstationsStnState 1.3.6.1.4.1.449.2.1.3.1.3.8.1.5
Current Station state.
                                     cdx6500allstationsUtilizationIn 1.3.6.1.4.1.449.2.1.3.1.3.8.1.6
Percentage of station bandwidth in use.
                                     cdx6500allstationsUtilizationOut 1.3.6.1.4.1.449.2.1.3.1.3.8.1.7
Percentage of station bandwidth in use.
                                     cdx6500allstationsCharInTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.8
Number of characters received by the station since the last node, port, station or statistics reset.
                                     cdx6500allstationsCharOutTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.9
Number of characters sent by the station since the last node, port, station or statistics reset.
                                     cdx6500allstationsPktInTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.10
Number of packets received by the station since the last node, port, station or statistics reset.
                                     cdx6500allstationsPktOutTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.11
Number of packets sent by the port since the last node, port, station or statistics reset.
                                     cdx6500allstationsFrameInTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.12
Number of frames received by the port since the last node, port, station or statistics reset.
                                     cdx6500allstationsFrameOutTot 1.3.6.1.4.1.449.2.1.3.1.3.8.1.13
Number of frames sent by the port since the last node, port, station or statistics reset.
                                     cdx6500allstationsPktsQueued 1.3.6.1.4.1.449.2.1.3.1.3.8.1.14
Number of packets currently queued.
                                     cdx6500allstationsCharsInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.15
Summary of the characters being received over the station.
                                     cdx6500allstationsCharsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.16
Summary of the characters being sent over the station.
                                     cdx6500allstationsPktsInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.17
Summary of the packets being received over the station.
                                     cdx6500allstationsPktsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.18
Summary of the packets being sent over the station.
                                     cdx6500allstationsFramesInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.19
Summary of the frames being received over the station.
                                     cdx6500allstationsFramesOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.8.1.20
Summary of the frames being sent over the station.
                                     cdx6500allstationsBootStation 1.3.6.1.4.1.449.2.1.3.1.3.8.1.21
Boots the specified station. bootStn - Boot Station noBootStn - Do not boot Station.
                                     cdx6500allstationsDisableStation 1.3.6.1.4.1.449.2.1.3.1.3.8.1.22
Disables the specified station. disableStn - Disable Station. noDisableStn - Do not disable Station.
                                     cdx6500allstationsEnableStation 1.3.6.1.4.1.449.2.1.3.1.3.8.1.23
Enables the specified station. enableStn - Enable Station. noEnableStn - Not not enable Station.
                                     cdx6500allstationsBusyOutStation 1.3.6.1.4.1.449.2.1.3.1.3.8.1.24
Busy out the specified station. busyoutStn - Busyout Station. noBusyoutStn - Do not busyout Station.
                         cdx6500PSTLANConnectionGroup 1.3.6.1.4.1.449.2.1.3.1.6
                     cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
                         cdx6500OSTCSISOptionStatTable 1.3.6.1.4.1.449.2.1.3.2.5
A table describing the Software Options that have been purchased and enabled for this node.
                             cdx6500OSTCSISOptionStatEntry 1.3.6.1.4.1.449.2.1.3.2.5.1
A list of objects describing a single Software Option.
                                 cdx6500CSISOptionNumber 1.3.6.1.4.1.449.2.1.3.2.5.1.1
Table index, which is code for the software option. Following are the various software options and their codes. 1 - MX25 2 - SDLC 3 - BSC3270 4 - BSC2780 5 - VIP 6 - VIDEOTEX 7 - Data/Connection Protect 8 - INL backup 9 - FR DTE Interface 10 - 6600 ETM 11 - NCRBSC 12 - TRANSPARENT POLLED ASYNC 13 - INTERNAL DSD 14 - 801 AUTODIALER 15 - BSTD 16 - FLASH Enable 17 - NCCP Pad 18 - TBOP 19 - Source Routing Bridge 22 - IBM2260 23 - XDLC 24 - Transparent Bridge 25 - Local Termination 26 - SR/TB Bridge 29 - IP Routing 31 - FR DCE Interface 32 - 6520 Model ID RN 33 - 6520 Model ID SN 34 - 6520 Model ID BN 40 - TCOP 42 - FrameRelay LLC Conversion 43 - IP stack on CPU+ 44 - TNPP-PAD Enable 45 - Token Ring LLC Conversion 46 - Ethernet LLC Conversion 50 - Dial-Out Routing Manager 51 - Dial-Out Routing Agent 52 - Chinapac Billing Feature 53 - Chinapac NUIC Interface 54 - X32 Port 55 - Chinapac NUI Concentrator.
                                 cdx6500CSISMaxAllowed 1.3.6.1.4.1.449.2.1.3.2.5.1.2
Number of ports that this option can support. Options can be purchased to support different numbers of ports. Value of 65535 indicates no limit.
                                 cdx6500CSISNumUsed 1.3.6.1.4.1.449.2.1.3.2.5.1.3
The number of ports actually being used with this option.
                                 cdx6500CSISOptionAuth 1.3.6.1.4.1.449.2.1.3.2.5.1.4
unauthorized - an attempt was made to use an option that has not been purchased or enabled. authorized - all attempts to use the option were authorized.
                         cdx6500OSTCSISPortUsageTable 1.3.6.1.4.1.449.2.1.3.2.6
A table providing statistics on unauthorized port usage.
                             cdx6500OSTCSISPortUsageEntry 1.3.6.1.4.1.449.2.1.3.2.6.1
A list of authorization statistics for a single port.
                                 cdx6500CSISPortNumber 1.3.6.1.4.1.449.2.1.3.2.6.1.1
The ports number.
                                 cdx6500CSISPortAuth 1.3.6.1.4.1.449.2.1.3.2.6.1.2
unauthorized - an attempt was made to use this port to exceed an option port limit. authorized - the port was not used in an unauthorized fashion.
                     cdx6500StatTFTPGroup 1.3.6.1.4.1.449.2.1.3.3
                     cdx6500StatNetworkSvcsGroup 1.3.6.1.4.1.449.2.1.3.4
                         cdx6500StatSVCTable 1.3.6.1.4.1.449.2.1.3.4.1
A table of currently active switched virtual circuits (SVC). The table is dynamic i.e. changing as queries are being performed on the table.
                             cdx6500StatSVCEntry 1.3.6.1.4.1.449.2.1.3.4.1.1
A list of objects describing a single SVC.
                                 cdx6500StatSVCIndex 1.3.6.1.4.1.449.2.1.3.4.1.1.1
It is position in the list of SVCs.
                                 cdx6500StatSVCCallingChannel 1.3.6.1.4.1.449.2.1.3.4.1.1.2
Calling channel of SVC.
                                 cdx6500StatSVCCalledChannel 1.3.6.1.4.1.449.2.1.3.4.1.1.3
Called channel of SVC.
                                 cdx6500StatSVCReverseCharge 1.3.6.1.4.1.449.2.1.3.4.1.1.4
Reverse charge facility condition. refuse - Refused the condition. accept - Accepted the condition. newvalRefuse - same functionality as refuse, new enumeration added for RFC1155 compatibility.
                                 cdx6500StatSVCFastSelect 1.3.6.1.4.1.449.2.1.3.4.1.1.5
Fast select facility condition. noFastSelect - Fast select facility is not selected. fastSelect - Fast select facility is selected. newvalNoFastSelect - same functionality as noFastSelect, new enumeration added for RFC1155 compatibility.
                                 cdx6500StatSVCNetUserIdentification 1.3.6.1.4.1.449.2.1.3.4.1.1.6
Net user identifiaction facility condition. notRequested - Net user identifiaction facility not requested. requested - Net user identifiaction facility requested. newvalNotRequested - same functionality as notRequested, new enumeration added for RFC1155 compatibility.
                                 cdx6500StatSVCClosedUserGroup 1.3.6.1.4.1.449.2.1.3.4.1.1.7
Closed user group facility on/off. notRequested - Closed user group facility off. requested - Closed user group facility on. newvalNotRequested - same functionality as notRequested, new enumeration added for RFC1155 compatibility.
                                 cdx6500StatSVCConnectionUPTime 1.3.6.1.4.1.449.2.1.3.4.1.1.8
Time at which connection was up.
                 cdx6500Controls 1.3.6.1.4.1.449.2.1.4
                     cdx6500ContTFTP 1.3.6.1.4.1.449.2.1.4.2
                     cdx6500statControls 1.3.6.1.4.1.449.2.1.4.4
                         cdx6500statResetAllStats 1.3.6.1.4.1.449.2.1.4.4.1
A control object that when set to reset will cause the node to reset ALL its statistics. reset - reset ALL node statistics. noReset - Do not reset the statistics.
                     cdx6500ContFlash 1.3.6.1.4.1.449.2.1.4.21
                           cdx6500ContFlashCopyImage 1.3.6.1.4.1.449.2.1.4.21.1
Copy image from current to alternate or alternate to current.
                           cdx6500ContFlashCopyCmem 1.3.6.1.4.1.449.2.1.4.21.2
Copy cmem from current to alternate or alternate to current.
                           cdx6500ContFlashActiveImage 1.3.6.1.4.1.449.2.1.4.21.3
Activate image in flash memory.
                           cdx6500ContFlashActiveCmem 1.3.6.1.4.1.449.2.1.4.21.4
Activate cmem in flash memory.
                           cdx6500ContFlashDeleteImage 1.3.6.1.4.1.449.2.1.4.21.5
Delete all images in flash memory.
                     cdx6500ContT3E3Table 1.3.6.1.4.1.449.2.1.4.23
                           cdx6500T3E3ContEntry 1.3.6.1.4.1.449.2.1.4.23.1
Each control applies to a single T3E3 port.
                               t3e3ContPortNumber 1.3.6.1.4.1.449.2.1.4.23.1.1
Port number of the T3E3 port.
                               t3e3ContPortControl 1.3.6.1.4.1.449.2.1.4.23.1.2
Control operations for the specified T3E3 port. boot - Boots the T3E3 port enable - Enables the T3E3 port disable - Disables the T3E3 port resetstats - Resets the T3E3 port statistics.