ATI-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: ATI-MIB
Download as:   
SNMPv2-SMI, SNMP-REPEATER-MIB, RFC-1215, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alliedTelesyn 1.3.6.1.4.1.207
         products 1.3.6.1.4.1.207.1
             bridge 1.3.6.1.4.1.207.1.1
                 atiBridgeagent 1.3.6.1.4.1.207.1.1.1
                     bridgesnmpd 1.3.6.1.4.1.207.1.1.1.1
                         atiBridge 1.3.6.1.4.1.207.1.1.1.1.1
             repeater 1.3.6.1.4.1.207.1.2
                 hub3600 1.3.6.1.4.1.207.1.2.1
                 hub3100 1.3.6.1.4.1.207.1.2.10
                 hubTurboStack 1.3.6.1.4.1.207.1.2.65
         filterTable 1.3.6.1.4.1.207.2
             ftConfig 1.3.6.1.4.1.207.2.1
Bridge FT operational parameters
                 ftMaxAge 1.3.6.1.4.1.207.2.1.1
Seconds before an unreferenced dynamic FT entry is removed
                 ftMaxRemove 1.3.6.1.4.1.207.2.1.2
Max number table entries removed each time table overflows
                 ftMaxFilter 1.3.6.1.4.1.207.2.1.3
Max number FT entries
                 ftAgeTime 1.3.6.1.4.1.207.2.1.4
Seconds between FT table entries
                 ftMaxPerm 1.3.6.1.4.1.207.2.1.5
Max number of permanent FT entries. May be set to zero which causes all non-system FT entries to be deleted
                 ftForwMBcast 1.3.6.1.4.1.207.2.1.6
Flag indicates if multicast (including broadcast) packets are to be forwarded (1) or discarded (0)
                 ftSecureMode 1.3.6.1.4.1.207.2.1.7
Flag indicates if bridge will learn addresses
             ftEntry 1.3.6.1.4.1.207.2.2
Bridge FT entries each selected by destination address
                 ftAge 1.3.6.1.4.1.207.2.2.1
FT entry age since last referenced in seconds
                 ftDisp 1.3.6.1.4.1.207.2.2.2
FT entry disposition. Can be more than one ORed together
                 ftAddr 1.3.6.1.4.1.207.2.2.91
destination address (dummy index)
         interfaceErrors 1.3.6.1.4.1.207.3
Set of Ethernet link level errors
             ifeInBusErr 1.3.6.1.4.1.207.3.1
Number of EtherStar read bus errors that have occurred
             ifeInShortPkt 1.3.6.1.4.1.207.3.2
Number of short packets received
             ifeInAlgError 1.3.6.1.4.1.207.3.3
Number of packets received with alignment errors
             ifeInBadSize 1.3.6.1.4.1.207.3.4
Number of packets received greater than 1518 bytes
             ifeInOverflow 1.3.6.1.4.1.207.3.5
Number of times receive buffer overflowed
             ifeInCRCErr 1.3.6.1.4.1.207.3.6
Number of CRC errors detected
             ifeOutColl16 1.3.6.1.4.1.207.3.7
Number of packets discarded due to excessive collisions
             ifeOutCol 1.3.6.1.4.1.207.3.8
Number of collisions detected
             ifeOutShortPkt 1.3.6.1.4.1.207.3.9
Number of short packets transmitted
             ifeOutUnderflow 1.3.6.1.4.1.207.3.10
buffered transmitted data
             ifeOutBusErr 1.3.6.1.4.1.207.3.11
Number of EtherStar write bus errors
             ifePort 1.3.6.1.4.1.207.3.91
Tok_String
         forwardCounters 1.3.6.1.4.1.207.4
Counters associated with bridge entity
             fcInOctets 1.3.6.1.4.1.207.4.1
Number bytes received by bridge entity on specified port
             fcInPkts 1.3.6.1.4.1.207.4.2
Number packets received by bridge entity on specified port
             fcInNUcastPkts 1.3.6.1.4.1.207.4.3
Number multicast/broadcast packets received by bridge enity on specified port
             fcForwOctets 1.3.6.1.4.1.207.4.4
Number bytes forwarded by bridge entity onto specified port
             fcForwPkts 1.3.6.1.4.1.207.4.5
Number of packets forwarded by bridge enity onto specified port
             fcFiltOctets 1.3.6.1.4.1.207.4.6
Number of bytes received on specified port that were discarded by bridge enity
             fcFiltPkts 1.3.6.1.4.1.207.4.7
Number of packets dicarded by filtering by bridge enity
             fcPort 1.3.6.1.4.1.207.4.91
Tok_String
         systemCounters 1.3.6.1.4.1.207.5
System operating s/w counters
             sysMemFree 1.3.6.1.4.1.207.5.1
Number of buffers of a particular size on the memory free list
             sysMemAllocFail 1.3.6.1.4.1.207.5.2
Number of allocation failures for a particular buffer size
             sysMemTotAllocFail 1.3.6.1.4.1.207.5.3
Total number of memory allocation failures
             sysMemAllocTooBig 1.3.6.1.4.1.207.5.4
Number of memory allocation requests that failed
             sysMemFreeFail 1.3.6.1.4.1.207.5.5
Number of memory free requests that failed
             sysTimeToReset 1.3.6.1.4.1.207.5.6
Number of seconds unit bridge reset
             sysPanicMesg 1.3.6.1.4.1.207.5.7
Error message associated with last s/w generated reset
             sysResetCount 1.3.6.1.4.1.207.5.8
Number of times bridge has been reset other than power on/off
         spanningTree 1.3.6.1.4.1.207.6
             stBridge 1.3.6.1.4.1.207.6.1
Bridge specific parameters related to operation of Spanning Tree Protocol
                 stBrName 1.3.6.1.4.1.207.6.1.1
Comment string denoting the bridge
                 stBrIdent 1.3.6.1.4.1.207.6.1.2
802.1 Bridge ID
                 stBrMaxAge 1.3.6.1.4.1.207.6.1.3
802.1 Max BPDU Age (sec) for bridge
                 stBrHelloTime 1.3.6.1.4.1.207.6.1.4
802.1 Hello Time (sec) for bridge
                 stBrForwDelay 1.3.6.1.4.1.207.6.1.5
802.1 Forward Delay Time (sec) for bridge
                 stBrIsRoot 1.3.6.1.4.1.207.6.1.6
Bridge is root (1=yes 0=no)
                 stBrIsDesig 1.3.6.1.4.1.207.6.1.7
Flag indicating status of bridge as designated bridge (1=yes 0=no)
                 stBrSpanAddr 1.3.6.1.4.1.207.6.1.8
MAC address used as Spanning Tree Protocol multicast address
                 stBrPriority 1.3.6.1.4.1.207.6.1.9
802.1 bridge priority
                 stBrSTPDisabled 1.3.6.1.4.1.207.6.1.10
Variable to enable/disable operation of Spanning Tree (1=STP on 0=STP off)
             stRoot 1.3.6.1.4.1.207.6.2
Parameters related to operation of Spanning Tree Protocol for Root bridge
                 stRtIdent 1.3.6.1.4.1.207.6.2.1
802.1 Bridge ID of current Root bridge
                 stRtCost 1.3.6.1.4.1.207.6.2.2
802.1 Root Path Cost of current Root bridge
                 stRtPort 1.3.6.1.4.1.207.6.2.3
Port number of port that provides path to current Root bridge
                 stRtMaxAge 1.3.6.1.4.1.207.6.2.4
802.1 Max BPDU Age specified by current known Root bridge
                 stRtHelloTime 1.3.6.1.4.1.207.6.2.5
802.1 Hello Time specified by current Root bridge
                 stRtForwDelay 1.3.6.1.4.1.207.6.2.6
802.1 Forward Delay specified by current Root bridge
             stPort 1.3.6.1.4.1.207.6.3
Port specific parameters related to operation of Spanning Tree Protocol
                 stPrtState 1.3.6.1.4.1.207.6.3.1
802.1 Port State disable and blocked states
                 stPrtCost 1.3.6.1.4.1.207.6.3.2
802.1 Port Path Cost
                 stPrtIsDesig 1.3.6.1.4.1.207.6.3.3
Status of port as designated port for LAN
                 stPrtIsRoot 1.3.6.1.4.1.207.6.3.4
Status of port as Root Port
                 stPrtDesigRoot 1.3.6.1.4.1.207.6.3.5
Bridge ID of Root brigde
                 stPrtDesigCost 1.3.6.1.4.1.207.6.3.6
Path Cost to Root bridge as advertised by the designated bridge
                 stPrtDesigBridge 1.3.6.1.4.1.207.6.3.7
Bridge ID of designated bridge
                 stPrtDesigPort 1.3.6.1.4.1.207.6.3.8
Port ID of designated port
                 stPrtPriority 1.3.6.1.4.1.207.6.3.9
802.1 Port Priority
                 stPrtPort 1.3.6.1.4.1.207.6.3.91
Tok_String
             spanTreeStats 1.3.6.1.4.1.207.6.4
Spanning Tree stats on counters
                 stsTopoChanges 1.3.6.1.4.1.207.6.4.1
Number of topology changes that have occured since power-on
                 stsConfigTimeout 1.3.6.1.4.1.207.6.4.2
Number of timeouts due to config BPDU not received
                 stsPortDisable 1.3.6.1.4.1.207.6.4.3
Number of times port has been disabled since power-on
                 stsPortEnable 1.3.6.1.4.1.207.6.4.4
Number of times port has been enabled since power-on
                 stsInBadLen 1.3.6.1.4.1.207.6.4.5
Number of STP frames received with bad lenth by this port
                 stsInUnknown 1.3.6.1.4.1.207.6.4.6
Packets received with bad 802.3 LSAP number by this port
                 stsIn8021Man 1.3.6.1.4.1.207.6.4.7
Packets received with 802.1 Management LSAP (discarded)
                 stsInConfig 1.3.6.1.4.1.207.6.4.8
Number of config BPDUs received by this port
                 stsOutConfig 1.3.6.1.4.1.207.6.4.9
Number of config BPDUs transmitted by this port
                 stsOutTopoChg 1.3.6.1.4.1.207.6.4.10
Number of Topology Change Notification BPDU transmitted by this port
                 stsPort 1.3.6.1.4.1.207.6.4.91
Tok_String
         filterRange 1.3.6.1.4.1.207.7
             frNumRange 1.3.6.1.4.1.207.7.1
The maximum number of filter range table entries when read (GET). Set to zero to delete all filter range table entries. A set with any other value is ignored.
             frEntry 1.3.6.1.4.1.207.7.2
Tok_String
             frIndex 1.3.6.1.4.1.207.7.91
Tok_String
         mibObject 1.3.6.1.4.1.207.8
             hubMib 1.3.6.1.4.1.207.8.1
                 rptrInfo 1.3.6.1.4.1.207.8.1.1
                     actualIPAddr 1.3.6.1.4.1.207.8.1.1.1
The actual IP Address that is currently being used by the hub. This could be the same value as hubIPAddr, or it may be different if another IP Address was received via Bootp.
                     hubIPAddr 1.3.6.1.4.1.207.8.1.1.2
The configured IP Address of the hub.
                     subnetMask 1.3.6.1.4.1.207.8.1.1.3
Subnet mask of the hub.
                     routerAddr 1.3.6.1.4.1.207.8.1.1.4
Gateway/router address of the hub.
                     snmpManager 1.3.6.1.4.1.207.8.1.1.5
IP Address of the hubs SNMP manager to which Traps will be sent.
                     softwareProduct 1.3.6.1.4.1.207.8.1.1.6
The ATI software product model number running in the hub.
                     softwareLevel 1.3.6.1.4.1.207.8.1.1.7
The software release level running in the hub.
                     configurationChanged 1.3.6.1.4.1.207.8.1.1.8
A flag, set to the value changed(1) when any of the hubs status or configuration has been changed. When this object is read, then the value is reset to nochange(2).
                     rptrNmMgrTable 1.3.6.1.4.1.207.8.1.1.9
A list of SNMP Trap Manager stations Entries. The number of entries is given by the rptrNmMgrTotal mib object.
                         rptrNmMgrEntry 1.3.6.1.4.1.207.8.1.1.9.1
An Trap receipt Manager Entry containing ipaddress of the configured NMSs to which Traps are sent.
                             rptrNmMgrIndex 1.3.6.1.4.1.207.8.1.1.9.1.1
The Index of SNMP Managers IP Address.
                             rptrNmMgrIpAddr 1.3.6.1.4.1.207.8.1.1.9.1.2
The IP Address of the NMS host configured.
                     deviceTable 1.3.6.1.4.1.207.8.1.1.10
The table contains the mapping of all devices in the chassis. For all hubs and switches, the object deviceQuadrant returns right (1). For docking devices, then it will reflect the position of the device in the docking station. This object is specific to Turbo Stack.
                           deviceEntry 1.3.6.1.4.1.207.8.1.1.10.1
The device entry in the DeviceTable.
                               deviceIndex 1.3.6.1.4.1.207.8.1.1.10.1.1
The Slot number in the chassis where the device is installed.
                               deviceQuadrant 1.3.6.1.4.1.207.8.1.1.10.1.2
The Quadrant of the device.
                               deviceDescr 1.3.6.1.4.1.207.8.1.1.10.1.3
TurboStack product family only. A textual description of the device. For devices that are repeaters, this value is identical to the rptrGroupDescr object.
                               deviceObjectID 1.3.6.1.4.1.207.8.1.1.10.1.4
TurboStack product family only. The sysObject identification of the device. For devices that are repeaters, this value is identical to the rptrGroupObjectID object.
                               deviceIpAddr 1.3.6.1.4.1.207.8.1.1.10.1.5
TurboStack product family only. The IP address (if present) of the device. For hubs devices, this object will return the same value as hubIPAddr.
                               devicePortCapacity 1.3.6.1.4.1.207.8.1.1.10.1.6
TurboStack product family only. The number of ports contained within the device. Valid range is 1-1024. Within each device, the ports are uniquely numbered in the range from 1 to devicePortCapacity. For devices that are repeaters, this value is identical to the rptrGroupPortCapacity object.
                     localOmegaState 1.3.6.1.4.1.207.8.1.1.11
This object enables the Local Omega to be enabled or disabled.
                     remoteOmegaState 1.3.6.1.4.1.207.8.1.1.12
This object enables the Remote Omega to be enabled or disabled.
                 groupInfo 1.3.6.1.4.1.207.8.1.2
                     ledInfo 1.3.6.1.4.1.207.8.1.2.1
See groupLEDInfo
                     groupInfoTable 1.3.6.1.4.1.207.8.1.2.2
Table of group specific information.
                         groupInfoEntry 1.3.6.1.4.1.207.8.1.2.2.1
An entry in the table, containing information about a single group of ports.
                             groupInfoIndex 1.3.6.1.4.1.207.8.1.2.2.1.1
This object identifies the group within the repeater for which this entry contains information.
                             groupLEDInfo 1.3.6.1.4.1.207.8.1.2.2.1.2
This information encodes the current state of the module per-port LEDs.
                             groupSegmentation 1.3.6.1.4.1.207.8.1.2.2.1.3
AT-3100 product family only. This object controls the segmentation option for this group. It may be segmented, connected, or using the modules external segmentation switch.
                             groupSecurity 1.3.6.1.4.1.207.8.1.2.2.1.4
AT-3100 product family only. This object controls the Security option for this group. It may be enabled, disabled, or using modules external security switch.
                             groupIntruderProtection 1.3.6.1.4.1.207.8.1.2.2.1.5
AT-3100 and TurboStack product families only. This object controls the Intruder Protection option for this group/module. For TurboStack products, disabled turns off Intruder Protection and places the module into source address Learning Mode. Enabled turns on Intruder Protection and places the module into Secure Mode.
                             groupSrcAddrLearningMode 1.3.6.1.4.1.207.8.1.2.2.1.6
AT-3100 product family only. This object indicates the Source Address Learning Mode. Mode1 : Automatic; passive devices: Automatic MAC address learning. Re-learn port MAC address after a port is disabled/re-enabled. Passive devices connected to a port will see all backbone traffic. Mode2 : Automatic; passive devices: Automatic MAC address learning. Re-learn port MAC address after link test fails (cable removed). Passive devices connected to a port will see all backbone traffic. Mode3 : Manual: No automatic MAC address learning (disabled). Mode4 : Automatic; active devices: Automatic MAC address learning. Re-learn port MAC address after a port is disabled/re-enabled. Passive devices connected to a port will see no backbone traffic.
                             groupIntruderTrap 1.3.6.1.4.1.207.8.1.2.2.1.7
AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefined source address) causes a Trap to be sent to the configured host manager. When this option is disabled then no Trap is sent on an Intruder Alert event.
                             groupIntruderDisable 1.3.6.1.4.1.207.8.1.2.2.1.8
AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefined source address) causes the port where the intruder was detected to be automatically disabled. When this option is disabled then the port will not be disabled on an Intruder Alert event.
                             groupOperStatus 1.3.6.1.4.1.207.8.1.2.2.1.9
TurboStack product family only. An object that indicates the operational status of the module. For modules that are repeaters, this value is identical to the rptrGroupOperStatus object. A status of operational(2) indicates that the module is present and functional within the chassis. A status of malfunctioning(3) indicates that the module is present within the chassis but is not functional. A status of notPresent(4) indicates that the module is temporarily or permanently physically and/or logically not a part of the chassis.
                             groupDescr 1.3.6.1.4.1.207.8.1.2.2.1.10
TurboStack product family only. A textual description of the module. For modules that are repeaters, this value is identical to the rptrGroupDescr object.
                             groupObjectID 1.3.6.1.4.1.207.8.1.2.2.1.11
TurboStack product family only. The sysObject identification of the module. For modules that are repeaters, this value is identical to the rptrGroupObjectID object.
                             groupIPAddress 1.3.6.1.4.1.207.8.1.2.2.1.12
TurboStack product family only. The IP address (if any) of the module. For modules that are repeaters, this value is identical to the actualIPAddr object. For non-repeater modules, this object identifies the IP address that may be used to communicate directly with the module.
                             groupPortCapacity 1.3.6.1.4.1.207.8.1.2.2.1.13
TurboStack product family only. The number of ports contained within the module. Valid range range is 1-1024. Within each module, the ports are uniquely numbered in the range from 1 to groupPortCapacity. For modules that are repeaters, this value is identical to the rptrGroupPortCapacity object.
                             groupEraseSourceAddressTable 1.3.6.1.4.1.207.8.1.2.2.1.14
TurboStack product family only. This object, when Set to the erase value, will clear (empty) the module Source Address Table, deleting all learned MAC addresses; this object will then automatically revert back to the noerase state. When Set to noerase, no action is taken and the Source Address Table remains unmodified. A Get of this object will always return the noerase value.
                             groupAddSourceAddress 1.3.6.1.4.1.207.8.1.2.2.1.15
TurboStack product family only. This object, when Set with a 48-bit MAC address value, will add the new MAC address to the module Source Address Table. A Get of this object will return a string of length zero.
                             groupDeleteSourceAddress 1.3.6.1.4.1.207.8.1.2.2.1.16
TurboStack product family only. This object, when Set with a 48-bit MAC address value, will delete the MAC address from the module Source Address Table. A Get of this object will return a string of length zero.
                             groupLimitAddressPerPort 1.3.6.1.4.1.207.8.1.2.2.1.17
TurboStack product family only. This object configures the module to allow no limitation on number of source addresses on its ports, or limit to only 1 source address per port.
                             groupCheckPrimaryTimer 1.3.6.1.4.1.207.8.1.2.2.1.18
TurboStack product family only. The Check Primary Timer is the timer value in seconds which determines how long to wait before checking if the primary port could receive again. This timer applies when the secondary port is enabled, and the primary ports failure is NOT due to loss of link. Range: 1 - 65535 in seconds, 0 means dont check receives. Default is 60 seconds.
                             groupReceiveFailureTimer 1.3.6.1.4.1.207.8.1.2.2.1.19
TurboStack product family only. The Receive Failure Timer is the timer value in seconds which determines how long to wait before the secondary port takes over when the primary port is not receiving data. This timer applies only when the primary ports failure is NOT due to loss of link. Range: 0 - 65535 in seconds, 0 means dont check receives. Default is 60 seconds.
                             groupCheckResampleTimer 1.3.6.1.4.1.207.8.1.2.2.1.20
TurboStack product family only. The Resample Timer is the timer value in milliseconds which determines how long to sample/test if the primary port could receive data or is no longer partitioned. This timer begins once groupCheckPrimaryTimer has expired, and during this sampling time, the secondary port cannot repeat data. Range: 100 - 65535 milliseconds. Default is 200 milliseconds.
                 portInfo 1.3.6.1.4.1.207.8.1.3
                     atiPortTable 1.3.6.1.4.1.207.8.1.3.1
Table of descriptive and status information about the ports.
                         atiPortEntry 1.3.6.1.4.1.207.8.1.3.1.1
An entry in the table, containing information about a single port.
                             atiPortGroupIndex 1.3.6.1.4.1.207.8.1.3.1.1.1
This object identifies the group containing the port for which this entry contains information.
                             atiPortIndex 1.3.6.1.4.1.207.8.1.3.1.1.2
This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the associated group.
                             portName 1.3.6.1.4.1.207.8.1.3.1.1.3
Port Name
                             portState 1.3.6.1.4.1.207.8.1.3.1.1.4
Port State option: enabled allow repeating of packets through the port; disabled turns off the port and prevents packets repeating through the port.
                             linkTest 1.3.6.1.4.1.207.8.1.3.1.1.5
Link Test option: enabled turns on checking for link test signals for the port; disabled turns off checking for link test signals.
                             altReconnection 1.3.6.1.4.1.207.8.1.3.1.1.6
Reconnection Method: 1=IEEE Standard, 2=Alternate.
                             polarityCorrection 1.3.6.1.4.1.207.8.1.3.1.1.7
Polarity Correction option: enabled turns on automatic polarity correction for the port; disabled turns off automatic polarity correction.
                             partitionedLED 1.3.6.1.4.1.207.8.1.3.1.1.8
This object reflects the current actual partitioning state of the port. The notpartitioned value means that the port is operational and repeating through the port is enabled. The partitioned value means that the port is not operational and repeating through the port is disabled.
                             linkTestLED 1.3.6.1.4.1.207.8.1.3.1.1.9
This object reflects the current actual link test state of the port. The nolinktesterror value means that valid link integrity test signals have been detected on the port, indicating that an operable device is cabled to the port. The linktesterror value means that no link integrity test signals have been detected, indicating removal or failure of the port-to-device cable, or that the device is not operational. This object applies only to UTP (twisted pair) and fiber optic ports (not AUI or BNC ports).
                             polarityLED 1.3.6.1.4.1.207.8.1.3.1.1.10
This object reflects the current actual polarity state of the port. The notreversed value means that the port-to-device cable connection is properly polarized. The reversed value means that the cable connection has reversed polarity. This object applies only to UTP (twisted pair) and fiber optic ports (not AUI or BNC ports).
                             portMACAddress 1.3.6.1.4.1.207.8.1.3.1.1.11
AT-3100 product family only. This object is either the MAC address of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port, or a manually input MAC address. If neither of those exists, then a string of length zero is returned. If a read operation is performed on this object, the value it returns is the same as the value returned by object rptrAddrTrackNewLastSrcAddress in the Standard Repeater MIB (RFC1516).
                             portFrames-64-127bytes 1.3.6.1.4.1.207.8.1.3.1.1.12
TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 64 through 127 octets.
                             portFrames-128-255bytes 1.3.6.1.4.1.207.8.1.3.1.1.13
TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 128 through 255 octets.
                             portFrames-256-511bytes 1.3.6.1.4.1.207.8.1.3.1.1.14
TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 256 through 511 octets.
                             portFrames-512-1023bytes 1.3.6.1.4.1.207.8.1.3.1.1.15
TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 512 through 1023 octets.
                             portFrames-1024-1518bytes 1.3.6.1.4.1.207.8.1.3.1.1.16
TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 1024 through 1518 octets.
                             portRedundantPort 1.3.6.1.4.1.207.8.1.3.1.1.17
TurboStack product family only. This is the redundant port for atiPortIndex. If the port is a secondary port as indicated in portRedundantPosition, then it serves as a backup port. This would indicate paired ports with redundant link.
                             portRedundantPosition 1.3.6.1.4.1.207.8.1.3.1.1.18
TurboStack product family only. This object will retrieve the redundant position of the port, primary or secondary port, if the port has a redundant link to it.
                             portLearningState 1.3.6.1.4.1.207.8.1.3.1.1.19
TurboStack product family only. This object enable the learning on a port to be shut ON or OFF. Once the learning is Shut Off, the learning of MAC Address will stop.
                 rptrStat 1.3.6.1.4.1.207.8.1.4
                     hubReadableFrames 1.3.6.1.4.1.207.8.1.4.1
The sum total of the Readable Frames Counters of all ports on all modules/groups
                     hubReadableOctets 1.3.6.1.4.1.207.8.1.4.2
The sum total of the Readable Octets (bytes) Counters of all ports on all modules/groups
                     hubFCSError 1.3.6.1.4.1.207.8.1.4.3
The sum total of the FCS (CRC) Error Counters of all ports on all modules/groups
                     hubAlignError 1.3.6.1.4.1.207.8.1.4.4
The sum total of the Alignment Error Counters of all ports on all modules/groups
                     hubFrameTooLong 1.3.6.1.4.1.207.8.1.4.5
The sum total of the Frame Too Long Error Counters of all ports on all modules/groups
                     hubShortEvent 1.3.6.1.4.1.207.8.1.4.6
The sum total of the Short Event Error Counters of all ports on all modules/groups
                     hubRunt 1.3.6.1.4.1.207.8.1.4.7
The sum total of the Runt Error Counters of all ports on all modules/groups
                     hubLateEvent 1.3.6.1.4.1.207.8.1.4.8
The sum total of the Late Event Error Counters of all ports on all modules/groups
                     hubVeryLongEvent 1.3.6.1.4.1.207.8.1.4.9
The sum total of the Very Long Event Error (Jabber) Counters of all ports on all modules/groups
                     hubDataRateMism 1.3.6.1.4.1.207.8.1.4.10
The sum total of the Data Rate Mismatch Error Counters of all ports on all modules/groups
                     hubAutoPartition 1.3.6.1.4.1.207.8.1.4.11
The sum total of the Auto Port Partition Counters of all ports on all modules/groups
                     hubTotalError 1.3.6.1.4.1.207.8.1.4.12
The sum total of all Error Counters of all ports on all modules/groups
                     hubPortCollision 1.3.6.1.4.1.207.8.1.4.13
The sum total of the Port Collision Counters of all ports on all modules/groups
                     hubFrames-64-127bytes 1.3.6.1.4.1.207.8.1.4.14
TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 64 through 127 octets.
                     hubFrames-128-255bytes 1.3.6.1.4.1.207.8.1.4.15
TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 128 through 255 octets.
                     hubFrames-256-511bytes 1.3.6.1.4.1.207.8.1.4.16
TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 256 through 511 octets.
                     hubFrames-512-1023bytes 1.3.6.1.4.1.207.8.1.4.17
TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 512 through 1023 octets.
                     hubFrames-1024-1518bytes 1.3.6.1.4.1.207.8.1.4.18
TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 1024 through 1518 octets.
                 groupStat 1.3.6.1.4.1.207.8.1.5
                     groupStatTable 1.3.6.1.4.1.207.8.1.5.1
Table of performance and error statistics for the groups.
                         groupStatEntry 1.3.6.1.4.1.207.8.1.5.1.1
An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this groups ports. The counters in this table are redundant in the sense that they are the summations of information already available through other objects. However, these sums provide a considerable optimization of network management traffic over the otherwise necessary retrieval of the individual counters included in each sum.
                             groupStatIndex 1.3.6.1.4.1.207.8.1.5.1.1.1
This object identifies the group within the repeater for which this entry contains information.
                             groupFCSError 1.3.6.1.4.1.207.8.1.5.1.1.2
The sum total of the FCS (CRC) Error Counters of all ports on this module/group
                             groupAlignError 1.3.6.1.4.1.207.8.1.5.1.1.3
The sum total of the Alignment Error Counters of all ports on this module/group
                             groupFrameTooLong 1.3.6.1.4.1.207.8.1.5.1.1.4
The sum total of the Frame Too Long Error Counters of all ports on this module/group
                             groupShortEvent 1.3.6.1.4.1.207.8.1.5.1.1.5
The sum total of the Short Event Error Counters of all ports on this module/group
                             groupRunt 1.3.6.1.4.1.207.8.1.5.1.1.6
The sum total of the Runt Error Counters of all ports on this module/group
                             groupPortCollision 1.3.6.1.4.1.207.8.1.5.1.1.7
The sum total of the Port Collision Counters of all ports on this module/group
                             groupLateEvent 1.3.6.1.4.1.207.8.1.5.1.1.8
The sum total of the Late Event Error Counters of all ports on this module/group
                             groupVeryLongEvent 1.3.6.1.4.1.207.8.1.5.1.1.9
The sum total of the Very Long Event Error (Jabber) Counters of all ports on this module/group
                             groupDataRateMism 1.3.6.1.4.1.207.8.1.5.1.1.10
The sum total of the Data Rate Mismatch Error Counters of all ports on this module/group
                             groupAutoPartition 1.3.6.1.4.1.207.8.1.5.1.1.11
The sum total of the Auto Port Partition Counters of all ports on this module/group
                             groupFrames-64-127bytes 1.3.6.1.4.1.207.8.1.5.1.1.12
TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 64 through 127 octets.
                             groupFrames-128-255bytes 1.3.6.1.4.1.207.8.1.5.1.1.13
TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 128 through 255 octets.
                             groupFrames-256-511bytes 1.3.6.1.4.1.207.8.1.5.1.1.14
TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 256 through 511 octets.
                             groupFrames-512-1023bytes 1.3.6.1.4.1.207.8.1.5.1.1.15
TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 512 through 1023 octets.
                             groupFrames-1024-1518bytes 1.3.6.1.4.1.207.8.1.5.1.1.16
TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 1024 through 1518 octets.
                 groupSAT 1.3.6.1.4.1.207.8.1.6
                     groupSourceAddressTable 1.3.6.1.4.1.207.8.1.6.1
TurboStack product family only. Table of learned and/or configured source MAC addresses which defines the only valid and allowable source addresses for this module (if Intruder Protection is enabled).
                         groupSATEntry 1.3.6.1.4.1.207.8.1.6.1.1
TurboStack product family only. An entry in the Source Address Table, containing information about a single source MAC address.
                             groupSATModule 1.3.6.1.4.1.207.8.1.6.1.1.1
TurboStack product family only. This object identifies the group within the repeater for which this entry contains information.
                             groupSATIndex 1.3.6.1.4.1.207.8.1.6.1.1.2
TurboStack product family only. This object identifies the index within the Source Address Table for which this entry contains information.
                             groupSATMacAddress 1.3.6.1.4.1.207.8.1.6.1.1.3
TurboStack product family only. This object is the learned or configured source MAC address. If no MAC address has been learned for this table entry (if this is beyond the logical end of the table) then a string of zero length will be returned.
                             groupSATPort 1.3.6.1.4.1.207.8.1.6.1.1.4
TurboStack product family only. This object is the port number where the source MAC address was last detected. If the MAC address has not been detected since the system was last started, then this object will be zero.
         atiTrapAttrs 1.3.6.1.4.1.207.9
             atiTrapIntruderMacAddress 1.3.6.1.4.1.207.9.1
The Mac address of the Intruder which is different from the rfc1516 object rptrAddrTrackLastSourceAddress is seen on port which is the the next object
             atiTrapIntruderModuleNumber 1.3.6.1.4.1.207.9.2
This is the module number on which an intruder was seen.
             atiTrapIntruderPortNumber 1.3.6.1.4.1.207.9.3
This is the port number on which an intruder was seen.
             atiPortChangeDirection 1.3.6.1.4.1.207.9.4
This is the direction of redundant port change. These two values are used in the trap atiRedundantPortChangeTrap.